From f593d8ed8b11a4f368e27ac779174d36906f8777 Mon Sep 17 00:00:00 2001 From: Bradley Nicholes Date: Mon, 23 Jan 2006 20:30:55 +0000 Subject: [PATCH] Remove NetWare makefiles that are no longer needed git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@371655 13f79535-47bb-0310-9956-ffa450edef68 --- modules/aaa/NWGNUauthnalias | 250 ------------------------------------ modules/aaa/NWGNUauthncore | 250 ------------------------------------ modules/aaa/NWGNUauthndef | 250 ------------------------------------ modules/aaa/NWGNUauthzcore | 250 ------------------------------------ modules/aaa/NWGNUauthzdef | 250 ------------------------------------ 5 files changed, 1250 deletions(-) delete mode 100644 modules/aaa/NWGNUauthnalias delete mode 100644 modules/aaa/NWGNUauthncore delete mode 100644 modules/aaa/NWGNUauthndef delete mode 100644 modules/aaa/NWGNUauthzcore delete mode 100644 modules/aaa/NWGNUauthzdef diff --git a/modules/aaa/NWGNUauthnalias b/modules/aaa/NWGNUauthnalias deleted file mode 100644 index 3c8449ab45..0000000000 --- a/modules/aaa/NWGNUauthnalias +++ /dev/null @@ -1,250 +0,0 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -prefix pre_nw.h \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = authnalias - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Authentication Alias Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = AuthnAlias Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/authnalias.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_authn_alias.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - authn_alias_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - diff --git a/modules/aaa/NWGNUauthncore b/modules/aaa/NWGNUauthncore deleted file mode 100644 index e86b694ab8..0000000000 --- a/modules/aaa/NWGNUauthncore +++ /dev/null @@ -1,250 +0,0 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -prefix pre_nw.h \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = authncore - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Authentication Core Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = AuthnCore Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/authncore.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_authn_core.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - authn_core_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - diff --git a/modules/aaa/NWGNUauthndef b/modules/aaa/NWGNUauthndef deleted file mode 100644 index e77d40dc33..0000000000 --- a/modules/aaa/NWGNUauthndef +++ /dev/null @@ -1,250 +0,0 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -prefix pre_nw.h \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = authndef - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Default Authentication Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = Authndef Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/authndef.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_authn_default.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - authn_default_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - diff --git a/modules/aaa/NWGNUauthzcore b/modules/aaa/NWGNUauthzcore deleted file mode 100644 index 01056f2aae..0000000000 --- a/modules/aaa/NWGNUauthzcore +++ /dev/null @@ -1,250 +0,0 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -prefix pre_nw.h \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = authzcore - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Authorization Core Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = AuthzCore Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/authzcore.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_authz_core.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - authz_core_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - diff --git a/modules/aaa/NWGNUauthzdef b/modules/aaa/NWGNUauthzdef deleted file mode 100644 index 348785b04d..0000000000 --- a/modules/aaa/NWGNUauthzdef +++ /dev/null @@ -1,250 +0,0 @@ -# -# Make sure all needed macro's are defined -# - -# -# Get the 'head' of the build environment if necessary. This includes default -# targets and paths to tools -# - -ifndef EnvironmentDefined -include $(AP_WORK)\build\NWGNUhead.inc -endif - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - -prefix pre_nw.h \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = authzdef - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Default Authorization Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = Authzdef Module - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/authzdef.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_authz_default.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - authz_default_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - -- 2.40.0