From d09c5753e33ff96ee57edb6d1e98e34041203695 Mon Sep 17 00:00:00 2001 From: Lasse Collin Date: Thu, 21 Oct 2010 23:06:31 +0300 Subject: [PATCH] liblzma: Update the comments in the API headers. Adding support for LZMA_FINISH for Index encoding and decoding needed tiny additions to the relevant .c files too. --- src/liblzma/api/lzma.h | 4 +-- src/liblzma/api/lzma/base.h | 38 ++++++++++----------- src/liblzma/api/lzma/bcj.h | 4 +-- src/liblzma/api/lzma/block.h | 4 +-- src/liblzma/api/lzma/container.h | 26 ++++++++++----- src/liblzma/api/lzma/filter.h | 51 ++++++++++++++--------------- src/liblzma/api/lzma/hardware.h | 3 +- src/liblzma/api/lzma/index.h | 28 +++++++++------- src/liblzma/api/lzma/index_hash.h | 2 +- src/liblzma/api/lzma/lzma.h | 46 +++++++++++++++++--------- src/liblzma/api/lzma/stream_flags.h | 4 +-- src/liblzma/api/lzma/vli.h | 31 +++++++++--------- src/liblzma/common/index_decoder.c | 1 + src/liblzma/common/index_encoder.c | 1 + 14 files changed, 136 insertions(+), 107 deletions(-) diff --git a/src/liblzma/api/lzma.h b/src/liblzma/api/lzma.h index fb593a35..fb874c3e 100644 --- a/src/liblzma/api/lzma.h +++ b/src/liblzma/api/lzma.h @@ -60,8 +60,8 @@ * * Some could argue that liblzma API should provide all the required types, * for example lzma_uint64, LZMA_UINT64_C(n), and LZMA_UINT64_MAX. This was - * seen unnecessary mess, since most systems already provide all the necessary - * types and macros in the standard headers. + * seen as an unnecessary mess, since most systems already provide all the + * necessary types and macros in the standard headers. * * Note that liblzma API still has lzma_bool, because using stdbool.h would * break C89 and C++ programs on many systems. sizeof(bool) in C99 isn't diff --git a/src/liblzma/api/lzma/base.h b/src/liblzma/api/lzma/base.h index 993626a4..fc165ab7 100644 --- a/src/liblzma/api/lzma/base.h +++ b/src/liblzma/api/lzma/base.h @@ -281,21 +281,21 @@ typedef enum { * Using LZMA_SYNC_FLUSH very often can dramatically reduce * the compression ratio. With some filters (for example, * LZMA2), fine-tuning the compression options may help - * mitigate this problem significantly. + * mitigate this problem significantly (for example, + * match finder with LZMA2). * * Decoders don't support LZMA_SYNC_FLUSH. */ LZMA_FULL_FLUSH = 2, /**< - * \brief Make all the input available at output + * \brief Finish encoding of the current Block * - * Finish encoding of the current Block. All the input - * data going to the current Block must have been given - * to the encoder (the last bytes can still be pending in - * next_in). Call lzma_code() with LZMA_FULL_FLUSH until - * it returns LZMA_STREAM_END. Then continue normally with - * LZMA_RUN or finish the Stream with LZMA_FINISH. + * All the input data going to the current Block must have + * been given to the encoder (the last bytes can still be + * pending in* next_in). Call lzma_code() with LZMA_FULL_FLUSH + * until it returns LZMA_STREAM_END. Then continue normally + * with LZMA_RUN or finish the Stream with LZMA_FINISH. * * This action is currently supported only by Stream encoder * and easy encoder (which uses Stream encoder). If there is @@ -306,12 +306,12 @@ typedef enum { /**< * \brief Finish the coding operation * - * Finishes the coding operation. All the input data must - * have been given to the encoder (the last bytes can still - * be pending in next_in). Call lzma_code() with LZMA_FINISH - * until it returns LZMA_STREAM_END. Once LZMA_FINISH has - * been used, the amount of input must no longer be changed - * by the application. + * All the input data must have been given to the encoder + * (the last bytes can still be pending in next_in). + * Call lzma_code() with LZMA_FINISH until it returns + * LZMA_STREAM_END. Once LZMA_FINISH has been used, + * the amount of input must no longer be changed by + * the application. * * When decoding, using LZMA_FINISH is optional unless the * LZMA_CONCATENATED flag was used when the decoder was @@ -554,11 +554,11 @@ extern LZMA_API(void) lzma_end(lzma_stream *strm) lzma_nothrow; * this may give misleading information if decoding .xz Streams that have * multiple Blocks, because each Block can have different memory requirements. * - * \return Rough estimate of how much memory is currently allocated - * for the filter decoders. If no filter chain is currently - * allocated, some non-zero value is still returned, which is - * less than or equal to what any filter chain would indicate - * as its memory requirement. + * \return How much memory is currently allocated for the filter + * decoders. If no filter chain is currently allocated, + * some non-zero value is still returned, which is less than + * or equal to what any filter chain would indicate as its + * memory requirement. * * If this function isn't supported by *strm or some other error * occurs, zero is returned. diff --git a/src/liblzma/api/lzma/bcj.h b/src/liblzma/api/lzma/bcj.h index 82e4a440..8e37538a 100644 --- a/src/liblzma/api/lzma/bcj.h +++ b/src/liblzma/api/lzma/bcj.h @@ -31,7 +31,7 @@ #define LZMA_FILTER_IA64 LZMA_VLI_C(0x06) /**< - * Filter for IA64 (Itanium) binaries. + * Filter for IA-64 (Itanium) binaries. */ #define LZMA_FILTER_ARM LZMA_VLI_C(0x07) @@ -41,7 +41,7 @@ #define LZMA_FILTER_ARMTHUMB LZMA_VLI_C(0x08) /**< - * Filter for ARMThumb binaries. + * Filter for ARM-Thumb binaries. */ #define LZMA_FILTER_SPARC LZMA_VLI_C(0x09) diff --git a/src/liblzma/api/lzma/block.h b/src/liblzma/api/lzma/block.h index 8e681ed2..3019bf91 100644 --- a/src/liblzma/api/lzma/block.h +++ b/src/liblzma/api/lzma/block.h @@ -318,8 +318,8 @@ extern LZMA_API(lzma_ret) lzma_block_header_encode( * The size of the Block Header must have already been decoded with * lzma_block_header_size_decode() macro and stored to block->header_size. * - * block->filters must have been allocated, but not necessarily initialized. - * Possible existing filter options are _not_ freed. + * block->filters must have been allocated, but they don't need to be + * initialized (possible existing filter options are not freed). * * \param block Destination for Block options. * \param allocator lzma_allocator for custom allocator functions. diff --git a/src/liblzma/api/lzma/container.h b/src/liblzma/api/lzma/container.h index 0d907650..83e70b44 100644 --- a/src/liblzma/api/lzma/container.h +++ b/src/liblzma/api/lzma/container.h @@ -55,13 +55,13 @@ * * This flag doesn't affect the memory usage requirements of the decoder (at * least not significantly). The memory usage of the encoder may be increased - * a little but only at the lowest preset levels (0-2). + * a little but only at the lowest preset levels (0-3). */ #define LZMA_PRESET_EXTREME (UINT32_C(1) << 31) /** - * \brief Calculate rough memory usage of easy encoder + * \brief Calculate approximate memory usage of easy encoder * * This function is a wrapper for lzma_raw_encoder_memusage(). * @@ -72,7 +72,7 @@ extern LZMA_API(uint64_t) lzma_easy_encoder_memusage(uint32_t preset) /** - * \brief Calculate rough decoder memory usage of a preset + * \brief Calculate approximate decoder memory usage of a preset * * This function is a wrapper for lzma_raw_decoder_memusage(). * @@ -93,16 +93,19 @@ extern LZMA_API(uint64_t) lzma_easy_decoder_memusage(uint32_t preset) * \param preset Compression preset to use. A preset consist of level * number and zero or more flags. Usually flags aren't * used, so preset is simply a number [0, 9] which match - * the options -0 .. -9 of the xz command line tool. + * the options -0 ... -9 of the xz command line tool. * Additional flags can be be set using bitwise-or with * the preset level number, e.g. 6 | LZMA_PRESET_EXTREME. * \param check Integrity check type to use. See check.h for available - * checks. If you are unsure, use LZMA_CHECK_CRC32. + * checks. The xz command line tool defaults to + * LZMA_CHECK_CRC64, which is a good choice if you are + * unsure. LZMA_CHECK_CRC32 is good too as long as the + * uncompressed file is not many gigabytes. * * \return - LZMA_OK: Initialization succeeded. Use lzma_code() to * encode your data. * - LZMA_MEM_ERROR: Memory allocation failed. - * - LZMA_OPTIONS_ERROR: The given compression level is not + * - LZMA_OPTIONS_ERROR: The given compression preset is not * supported by this build of liblzma. * - LZMA_UNSUPPORTED_CHECK: The given check type is not * supported by this liblzma build. @@ -310,7 +313,8 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( * \brief Initialize .xz Stream decoder * * \param strm Pointer to properly prepared lzma_stream - * \param memlimit Rough memory usage limit as bytes + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. * \param flags Bitwise-or of zero or more of the decoder flags: * LZMA_TELL_NO_CHECK, LZMA_TELL_UNSUPPORTED_CHECK, * LZMA_TELL_ANY_CHECK, LZMA_CONCATENATED @@ -318,6 +322,7 @@ extern LZMA_API(lzma_ret) lzma_stream_buffer_encode( * \return - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags + * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_stream_decoder( lzma_stream *strm, uint64_t memlimit, uint32_t flags) @@ -332,12 +337,14 @@ extern LZMA_API(lzma_ret) lzma_stream_decoder( * of the input file has been detected. * * \param strm Pointer to properly prepared lzma_stream - * \param memlimit Rough memory usage limit as bytes + * \param memlimit Memory usage limit as bytes. Use UINT64_MAX + * to effectively disable the limiter. * \param flags Bitwise-or of flags, or zero for no flags. * * \return - LZMA_OK: Initialization was successful. * - LZMA_MEM_ERROR: Cannot allocate memory. * - LZMA_OPTIONS_ERROR: Unsupported flags + * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_auto_decoder( lzma_stream *strm, uint64_t memlimit, uint32_t flags) @@ -353,6 +360,7 @@ extern LZMA_API(lzma_ret) lzma_auto_decoder( * * \return - LZMA_OK * - LZMA_MEM_ERROR + * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_alone_decoder( lzma_stream *strm, uint64_t memlimit) @@ -379,7 +387,7 @@ extern LZMA_API(lzma_ret) lzma_alone_decoder( * won't be read is in[in_size]. * \param out Beginning of the output buffer * \param out_pos The next byte will be written to out[*out_pos]. - * *out_pos is updated only if encoding succeeds. + * *out_pos is updated only if decoding succeeds. * \param out_size Size of the out buffer; the first byte into * which no data is written to is out[out_size]. * diff --git a/src/liblzma/api/lzma/filter.h b/src/liblzma/api/lzma/filter.h index 038a9339..efd036f7 100644 --- a/src/liblzma/api/lzma/filter.h +++ b/src/liblzma/api/lzma/filter.h @@ -1,6 +1,6 @@ /** * \file lzma/filter.h - * \brief Common filter related types + * \brief Common filter related types and functions */ /* @@ -59,11 +59,6 @@ typedef struct { * If the filter doesn't need options, set this to NULL. If id is * set to LZMA_VLI_UNKNOWN, options is ignored, and thus * doesn't need be initialized. - * - * Some filters support changing the options in the middle of - * the encoding process. These filters store the pointer of the - * options structure and communicate with the application via - * modifications of the options structure. */ void *options; @@ -126,15 +121,16 @@ extern LZMA_API(lzma_ret) lzma_filters_copy(const lzma_filter *src, /** - * \brief Calculate rough memory requirements for raw encoder + * \brief Calculate approximate memory requirements for raw encoder * - * Because the calculation is rough, this function can be used to calculate - * the memory requirements for Block and Stream encoders too. + * This function can be used to calculate the memory requirements for + * Block and Stream encoders too because Block and Stream encoders don't + * need significantly more memory than raw encoder. * * \param filters Array of filters terminated with * .id == LZMA_VLI_UNKNOWN. * - * \return Rough number of bytes of memory required for the given + * \return Number of bytes of memory required for the given * filter chain when encoding. */ extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters) @@ -142,15 +138,16 @@ extern LZMA_API(uint64_t) lzma_raw_encoder_memusage(const lzma_filter *filters) /** - * \brief Calculate rough memory requirements for raw decoder + * \brief Calculate approximate memory requirements for raw decoder * - * Because the calculation is rough, this function can be used to calculate - * the memory requirements for Block and Stream decoders too. + * This function can be used to calculate the memory requirements for + * Block and Stream decoders too because Block and Stream decoders don't + * need significantly more memory than raw decoder. * * \param filters Array of filters terminated with * .id == LZMA_VLI_UNKNOWN. * - * \return Rough number of bytes of memory required for the given + * \return Number of bytes of memory required for the given * filter chain when decoding. */ extern LZMA_API(uint64_t) lzma_raw_decoder_memusage(const lzma_filter *filters) @@ -251,7 +248,8 @@ extern LZMA_API(lzma_ret) lzma_filters_update( * * \note There is no function to calculate how big output buffer * would surely be big enough. (lzma_stream_buffer_bound() - * works only for lzma_stream_buffer_encode().) + * works only for lzma_stream_buffer_encode(); raw encoder + * won't necessarily meet that bound.) */ extern LZMA_API(lzma_ret) lzma_raw_buffer_encode( const lzma_filter *filters, lzma_allocator *allocator, @@ -323,9 +321,10 @@ extern LZMA_API(lzma_ret) lzma_properties_size( * succeeds but using the same options to initialize the encoder * will fail. * - * \note It is OK to skip calling this function if - * lzma_properties_size() indicated that the size - * of the Filter Properties field is zero. + * \note If lzma_properties_size() indicated that the size + * of the Filter Properties field is zero, calling + * lzma_properties_encode() is not required, but it + * won't do any harm either. */ extern LZMA_API(lzma_ret) lzma_properties_encode( const lzma_filter *filter, uint8_t *props) lzma_nothrow; @@ -364,11 +363,11 @@ extern LZMA_API(lzma_ret) lzma_properties_decode( * memory to hold the encoded Filter Flags. * * \param size Pointer to integer to hold the calculated size - * \param filters Filter ID and associated options whose encoded + * \param filter Filter ID and associated options whose encoded * size is to be calculated * * \return - LZMA_OK: *size set successfully. Note that this doesn't - * guarantee that filters->options is valid, thus + * guarantee that filter->options is valid, thus * lzma_filter_flags_encode() may still fail. * - LZMA_OPTIONS_ERROR: Unknown Filter ID or unsupported options. * - LZMA_PROG_ERROR: Invalid options @@ -377,7 +376,7 @@ extern LZMA_API(lzma_ret) lzma_properties_decode( * you need to loop over every lzma_filter entry. */ extern LZMA_API(lzma_ret) lzma_filter_flags_size( - uint32_t *size, const lzma_filter *filters) + uint32_t *size, const lzma_filter *filter) lzma_nothrow lzma_attr_warn_unused_result; @@ -387,7 +386,7 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_size( * In contrast to some functions, this doesn't allocate the needed buffer. * This is due to how this function is used internally by liblzma. * - * \param filters Filter ID and options to be encoded + * \param filter Filter ID and options to be encoded * \param out Beginning of the output buffer * \param out_pos out[*out_pos] is the next write position. This * is updated by the encoder. @@ -399,7 +398,7 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_size( * buffer space (you should have checked it with * lzma_filter_flags_size()). */ -extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters, +extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filter, uint8_t *out, size_t *out_pos, size_t out_size) lzma_nothrow lzma_attr_warn_unused_result; @@ -407,8 +406,8 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters, /** * \brief Decode Filter Flags from given buffer * - * The decoded result is stored into *filters. filters->options is - * initialized but the old value is NOT free()d. + * The decoded result is stored into *filter. The old value of + * filter->options is not free()d. * * \return - LZMA_OK * - LZMA_OPTIONS_ERROR @@ -416,6 +415,6 @@ extern LZMA_API(lzma_ret) lzma_filter_flags_encode(const lzma_filter *filters, * - LZMA_PROG_ERROR */ extern LZMA_API(lzma_ret) lzma_filter_flags_decode( - lzma_filter *filters, lzma_allocator *allocator, + lzma_filter *filter, lzma_allocator *allocator, const uint8_t *in, size_t *in_pos, size_t in_size) lzma_nothrow lzma_attr_warn_unused_result; diff --git a/src/liblzma/api/lzma/hardware.h b/src/liblzma/api/lzma/hardware.h index f44cb602..e7dd03c3 100644 --- a/src/liblzma/api/lzma/hardware.h +++ b/src/liblzma/api/lzma/hardware.h @@ -39,8 +39,7 @@ * * This function may be useful when determining a reasonable memory * usage limit for decompressing or how much memory it is OK to use - * for compressing. For example, the default limit used by the xz - * command line tool is 40 % of RAM. + * for compressing. * * \return On success, the total amount of physical memory in bytes * is returned. If the amount of RAM cannot be determined, diff --git a/src/liblzma/api/lzma/index.h b/src/liblzma/api/lzma/index.h index 5ea12e35..16bacc28 100644 --- a/src/liblzma/api/lzma/index.h +++ b/src/liblzma/api/lzma/index.h @@ -136,6 +136,13 @@ typedef struct { * * This offset is relative to the beginning of the lzma_index * (i.e. usually the beginning of the .xz file). + * + * When doing random-access reading, it is possible that + * the target offset is not exactly at Block boundary. One + * will need to compare the target offset against + * uncompressed_file_offset or uncompressed_stream_offset, + * and possibly decode and throw away some amount of data + * before reaching the target offset. */ lzma_vli uncompressed_file_offset; @@ -166,14 +173,8 @@ typedef struct { * \brief Uncompressed size of this Block * * You should pass this to the Block decoder if you will - * decode this Block. - * - * When doing random-access reading, it is possible that - * the target offset is not exactly at Block boundary. One - * will need to compare the target offset against - * uncompressed_file_offset or uncompressed_stream_offset, - * and possibly decode and throw away some amount of data - * before reaching the target offset. + * decode this Block. It will allow the Block decoder to + * validate the uncompressed size. */ lzma_vli uncompressed_size; @@ -181,7 +182,8 @@ typedef struct { * \brief Unpadded size of this Block * * You should pass this to the Block decoder if you will - * decode this Block. + * decode this Block. It will allow the Block decoder to + * validate the unpadded size. */ lzma_vli unpadded_size; @@ -583,7 +585,9 @@ extern LZMA_API(lzma_index *) lzma_index_dup( * \param strm Pointer to properly prepared lzma_stream * \param i Pointer to lzma_index which should be encoded. * - * The only valid action value for lzma_code() is LZMA_RUN. + * The valid `action' values for lzma_code() are LZMA_RUN and LZMA_FINISH. + * It is enough to use only one of them (you can choose freely; use LZMA_RUN + * to support liblzma versions older than 5.0.0). * * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). * - LZMA_MEM_ERROR @@ -608,7 +612,9 @@ extern LZMA_API(lzma_ret) lzma_index_encoder( * \param memlimit How much memory the resulting lzma_index is * allowed to require. * - * The only valid action value for lzma_code() is LZMA_RUN. + * The valid `action' values for lzma_code() are LZMA_RUN and LZMA_FINISH. + * It is enough to use only one of them (you can choose freely; use LZMA_RUN + * to support liblzma versions older than 5.0.0). * * \return - LZMA_OK: Initialization succeeded, continue with lzma_code(). * - LZMA_MEM_ERROR diff --git a/src/liblzma/api/lzma/index_hash.h b/src/liblzma/api/lzma/index_hash.h index 94726e7b..fa2e048d 100644 --- a/src/liblzma/api/lzma/index_hash.h +++ b/src/liblzma/api/lzma/index_hash.h @@ -1,6 +1,6 @@ /** * \file lzma/index_hash.h - * \brief Validates Index by using a hash function + * \brief Validate Index by using a hash function * * Hashing makes it possible to use constant amount of memory to validate * Index of arbitrary size. diff --git a/src/liblzma/api/lzma/lzma.h b/src/liblzma/api/lzma/lzma.h index 9d31a5ce..ae577282 100644 --- a/src/liblzma/api/lzma/lzma.h +++ b/src/liblzma/api/lzma/lzma.h @@ -46,6 +46,10 @@ * Match finder has major effect on both speed and compression ratio. * Usually hash chains are faster than binary trees. * + * If you will use LZMA_SYNC_FLUSH often, the hash chains may be a better + * choice, because binary trees get much higher compression ratio penalty + * with LZMA_SYNC_FLUSH. + * * The memory usage formulas are only rough estimates, which are closest to * reality when dict_size is a power of two. The formulas are more complex * in reality, and can also change a little between liblzma versions. Use @@ -173,6 +177,7 @@ extern LZMA_API(lzma_bool) lzma_mode_is_supported(lzma_mode mode) * Since LZMA1 and LZMA2 share most of the code, it's simplest to share * the options structure too. For encoding, all but the reserved variables * need to be initialized unless specifically mentioned otherwise. + * lzma_lzma_preset() can be used to get a good starting point. * * For raw decoding, both LZMA1 and LZMA2 need dict_size, preset_dict, and * preset_dict_size (if preset_dict != NULL). LZMA1 needs also lc, lp, and pb. @@ -255,7 +260,13 @@ typedef struct { * eight-bit byte (also known as `literal') are taken into * account when predicting the bits of the next literal. * - * \todo Example + * E.g. in typical English text, an upper-case letter is + * often followed by a lower-case letter, and a lower-case + * letter is usually followed by another lower-case letter. + * In the US-ASCII character set, the highest three bits are 010 + * for upper-case letters and 011 for lower-case letters. + * When lc is at least 3, the literal coding can take advantage of + * this property in the uncompressed data. * * There is a limit that applies to literal context bits and literal * position bits together: lc + lp <= 4. Without this limit the @@ -275,12 +286,9 @@ typedef struct { /** * \brief Number of literal position bits * - * How many of the lowest bits of the current position (number - * of bytes from the beginning of the uncompressed data) in the - * uncompressed data is taken into account when predicting the - * bits of the next literal (a single eight-bit byte). - * - * \todo Example + * lp affects what kind of alignment in the uncompressed data is + * assumed when encoding literals. A literal is a single 8-bit byte. + * See pb below for more information about alignment. */ uint32_t lp; # define LZMA_LP_DEFAULT 0 @@ -288,14 +296,22 @@ typedef struct { /** * \brief Number of position bits * - * How many of the lowest bits of the current position in the - * uncompressed data is taken into account when estimating - * probabilities of matches. A match is a sequence of bytes for - * which a matching sequence is found from the dictionary and - * thus can be stored as distance-length pair. + * pb affects what kind of alignment in the uncompressed data is + * assumed in general. The default means four-byte alignment + * (2^ pb =2^2=4), which is often a good choice when there's + * no better guess. + * + * When the aligment is known, setting pb accordingly may reduce + * the file size a little. E.g. with text files having one-byte + * alignment (US-ASCII, ISO-8859-*, UTF-8), setting pb=0 can + * improve compression slightly. For UTF-16 text, pb=1 is a good + * choice. If the alignment is an odd number like 3 bytes, pb=0 + * might be the best choice. * - * Example: If most of the matches occur at byte positions of - * 8 * n + 3, that is, 3, 11, 19, ... set pb to 3, because 2**3 == 8. + * Even though the assumed alignment can be adjusted with pb and + * lp, LZMA1 and LZMA2 still slightly favor 16-byte alignment. + * It might be worth taking into account when designing file formats + * that are likely to be often compressed with LZMA1 or LZMA2. */ uint32_t pb; # define LZMA_PB_MIN 0 @@ -346,7 +362,7 @@ typedef struct { * * Setting depth to zero tells liblzma to use an automatic default * value, that depends on the selected match finder and nice_len. - * The default is in the range [10, 200] or so (it may vary between + * The default is in the range [4, 200] or so (it may vary between * liblzma versions). * * Using a bigger depth value than the default can increase diff --git a/src/liblzma/api/lzma/stream_flags.h b/src/liblzma/api/lzma/stream_flags.h index d255bdda..c6e73037 100644 --- a/src/liblzma/api/lzma/stream_flags.h +++ b/src/liblzma/api/lzma/stream_flags.h @@ -148,7 +148,7 @@ extern LZMA_API(lzma_ret) lzma_stream_footer_encode( /** * \brief Decode Stream Header * - * \param options Stream Header options to be encoded. + * \param options Target for the decoded Stream Header options. * \param in Beginning of the input buffer of * LZMA_STREAM_HEADER_SIZE bytes. * @@ -183,7 +183,7 @@ extern LZMA_API(lzma_ret) lzma_stream_header_decode( /** * \brief Decode Stream Footer * - * \param options Stream Header options to be encoded. + * \param options Target for the decoded Stream Header options. * \param in Beginning of the input buffer of * LZMA_STREAM_HEADER_SIZE bytes. * diff --git a/src/liblzma/api/lzma/vli.h b/src/liblzma/api/lzma/vli.h index 57e3d388..9ad13f2e 100644 --- a/src/liblzma/api/lzma/vli.h +++ b/src/liblzma/api/lzma/vli.h @@ -29,7 +29,7 @@ /** - * \brief Maximum supported value of variable-length integer + * \brief Maximum supported value of a variable-length integer */ #define LZMA_VLI_MAX (UINT64_MAX / 2) @@ -39,11 +39,10 @@ #define LZMA_VLI_UNKNOWN UINT64_MAX /** - * \brief Maximum supported length of variable length integers + * \brief Maximum supported encoded length of variable length integers */ #define LZMA_VLI_BYTES_MAX 9 - /** * \brief VLI constant suffix */ @@ -53,19 +52,19 @@ /** * \brief Variable-length integer type * - * This will always be unsigned integer. Valid VLI values are in the range - * [0, LZMA_VLI_MAX]. Unknown value is indicated with LZMA_VLI_UNKNOWN, - * which is the maximum value of the underlaying integer type. + * Valid VLI values are in the range [0, LZMA_VLI_MAX]. Unknown value is + * indicated with LZMA_VLI_UNKNOWN, which is the maximum value of the + * underlaying integer type. * - * In future, even if lzma_vli is defined to be something other than uint64_t, - * it is guaranteed that 2 * LZMA_VLI_MAX will not overflow lzma_vli. - * This simplifies integer overflow detection. + * lzma_vli will be uint64_t for the foreseeable future. If a bigger size + * is needed in the future, it is guaranteed that 2 * LZMA_VLI_MAX will + * not overflow lzma_vli. This simplifies integer overflow detection. */ typedef uint64_t lzma_vli; /** - * \brief Simple macro to validate variable-length integer + * \brief Validate a variable-length integer * * This is useful to test that application has given acceptable values * for example in the uncompressed_size and compressed_size variables. @@ -88,9 +87,9 @@ typedef uint64_t lzma_vli; * * \param vli Integer to be encoded * \param vli_pos How many VLI-encoded bytes have already been written - * out. When starting to encode a new integer, *vli_pos - * must be set to zero. To use single-call encoding, - * set vli_pos to NULL. + * out. When starting to encode a new integer in + * multi-call mode, *vli_pos must be set to zero. + * To use single-call encoding, set vli_pos to NULL. * \param out Beginning of the output buffer * \param out_pos The next byte will be written to out[*out_pos]. * \param out_size Size of the out buffer; the first byte into @@ -126,9 +125,9 @@ extern LZMA_API(lzma_ret) lzma_vli_encode(lzma_vli vli, size_t *vli_pos, * initialize it to zero when *vli_pos == 0, so * application isn't required to initialize *vli. * \param vli_pos How many bytes have already been decoded. When - * starting to decode a new integer, *vli_pos must - * be initialized to zero. To use single-call decoding, - * set this to NULL. + * starting to decode a new integer in multi-call + * mode, *vli_pos must be initialized to zero. To + * use single-call decoding, set vli_pos to NULL. * \param in Beginning of the input buffer * \param in_pos The next byte will be read from in[*in_pos]. * \param in_size Size of the input buffer; the first byte that diff --git a/src/liblzma/common/index_decoder.c b/src/liblzma/common/index_decoder.c index 86a22971..a6bc650e 100644 --- a/src/liblzma/common/index_decoder.c +++ b/src/liblzma/common/index_decoder.c @@ -291,6 +291,7 @@ lzma_index_decoder(lzma_stream *strm, lzma_index **i, uint64_t memlimit) lzma_next_strm_init(index_decoder_init, strm, i, memlimit); strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; return LZMA_OK; } diff --git a/src/liblzma/common/index_encoder.c b/src/liblzma/common/index_encoder.c index 706f1fd7..c10d7afa 100644 --- a/src/liblzma/common/index_encoder.c +++ b/src/liblzma/common/index_encoder.c @@ -209,6 +209,7 @@ lzma_index_encoder(lzma_stream *strm, const lzma_index *i) lzma_next_strm_init(lzma_index_encoder_init, strm, i); strm->internal->supported_actions[LZMA_RUN] = true; + strm->internal->supported_actions[LZMA_FINISH] = true; return LZMA_OK; } -- 2.40.0