From b6f18b2c262239cf2b0e02d3e85e139f6eff6fe4 Mon Sep 17 00:00:00 2001 From: Peter Eisentraut Date: Thu, 31 Jan 2002 00:46:26 +0000 Subject: [PATCH] Rebuild from source. --- INSTALL | 401 ++++++++++++++++++++++++++++++-------------------------- 1 file changed, 218 insertions(+), 183 deletions(-) diff --git a/INSTALL b/INSTALL index b6c339b085..1288a9da4a 100644 --- a/INSTALL +++ b/INSTALL @@ -24,7 +24,7 @@ The long version is the rest of this document. Requirements In general, a modern Unix-compatible platform should be able to run -PostgreSQL. The platforms that had received explicit testing at the time of +PostgreSQL. The platforms that had received specific testing at the time of release are listed in the Section called Supported Platforms below. In the "doc" subdirectory of the distribution there are several platform-specific FAQ documents you might wish to consult if you are having trouble. @@ -38,27 +38,29 @@ The following prerequisites exist for building PostgreSQL: gmake --version - If at all possible you should use version 3.76.1 or later. + It is recommended to use version 3.76.1 or later. * You need an ISO/ANSI C compiler. Recent versions of GCC are recommendable, but PostgreSQL is known to build with a wide variety of compilers from different vendors. - * gzip + * gzip is needed to unpack the distribution in the first place. If you + are reading this, you probably already got past that hurdle. - * The GNU Readline library for comfortable line editing and command - history retrieval will automatically be used if found. You might wish - to install it before proceeding, but it is not required. (On NetBSD, + * The GNU Readline library (for comfortable line editing and command + history retrieval) will automatically be used if found. You might wish + to install it before proceeding, but it is not essential. (On NetBSD, the "libedit" library is readline-compatible and is used if "libreadline" is not found.) - * Flex and Bison are *not* required when building from a released source - package because the output files are pre-generated. You will need these - programs only when building from a CVS tree or when the actual scanner - and parser definition files were changed. If you need them, be sure to - get Flex 2.5.4 or later and Bison 1.28 or later. Other yacc programs - can sometimes be used, but doing so requires extra efforts and is not - recommended. Other lex programs will definitely not work. + * GNU Flex and Bison are needed to build from scratch, but they are *not* + required when building from a released source package because + pre-generated output files are included in released packages. You will + need these programs only when building from a CVS tree or if you + changed the actual scanner and parser definition files. If you need + them, be sure to get Flex 2.5.4 or later and Bison 1.28 or later. Other + yacc programs can sometimes be used, but doing so requires extra effort + and is not recommended. Other lex programs will definitely not work. * To build on Windows NT or Windows 2000 you need the Cygwin and cygipc packages. See the file "doc/FAQ_MSWIN" for details. @@ -96,10 +98,11 @@ here. These instructions assume that your existing installation is under the pg_dumpall > outputfile - If you need to preserve the OIDs (such as when using them as foreign - keys), then use the "-o" option when running "pg_dumpall". "pg_dumpall" - does not save large objects. Check the Administrator's Guide if you - need to do this. + If you need to preserve OIDs (such as when using them as foreign keys), + then use the "-o" option when running "pg_dumpall". + + "pg_dumpall" does not save large objects. Check the Administrator's + Guide if you need to do this. Make sure that you use the "pg_dumpall" command from the version you are currently running. 7.2's "pg_dumpall" should not be used on older @@ -122,11 +125,11 @@ here. These instructions assume that your existing installation is under the /etc/rc.d/init.d/postgresql stop - works. + works. Another possibility is "pg_ctl stop". 4. If you are installing in the same place as the old version then it is also a good idea to move the old installation out of the way, in case - you still need it later on. Use a command like this: + you have trouble and need to revert to it. Use a command like this: mv /usr/local/pgsql /usr/local/pgsql.old @@ -163,11 +166,11 @@ Installation Procedure This script will run a number of tests to guess values for various system dependent variables and detect some quirks of your operating - system, and finally creates several files in the build tree to record - what it found. + system, and finally will create several files in the build tree to + record what it found. The default configuration will build the server and utilities, as well - as all client applications and interfaces that only require a C + as all client applications and interfaces that require only a C compiler. All files will be installed under "/usr/local/pgsql" by default. @@ -246,17 +249,17 @@ Installation Procedure and are namespace-clean. The internal header files and the server header files are installed into private directories under includedir. See the Programmer's Guide for information - how to get at the header files for each interface. Finally, a - private subdirectory will also be created, if appropriate, - under libdir for dynamically loadable modules. + about how to get at the header files for each interface. + Finally, a private subdirectory will also be created, if + appropriate, under libdir for dynamically loadable modules. --with-includes=DIRECTORIES "DIRECTORIES" is a colon-separated list of directories that will be added to the list the compiler searches for header files. If you have optional packages (such as GNU Readline) installed in a - non-standard location you have to use this option and probably the - corresponding "--with-libraries" option. + non-standard location, you have to use this option and probably + also the corresponding "--with-libraries" option. Example: --with-includes=/opt/gnu/include:/usr/sup/include. @@ -293,12 +296,12 @@ Installation Procedure --enable-nls[=LANGUAGES] Enables Native Language Support (NLS), that is, the ability to - display a program's message in a language other than English. + display a program's messages in a language other than English. "LANGUAGES" is a space separated list of codes of the languages - that you want supported. (The intersection between your list and - the set of actually provided translations will be computed - automatically.) If you do not specify it, then all available - translations are installed. + that you want supported, for example --enable-nls='de fr'. (The + intersection between your list and the set of actually provided + translations will be computed automatically.) If you do not + specify a list, then all available translations are installed. To use this option, you will need an implementation of the gettext API. Some operating systems have this built-in (e.g., Linux, @@ -314,7 +317,9 @@ Installation Procedure Set "NUMBER" as the default port number for server and clients. The default is 5432. The port can always be changed later on, but if you specify it here then both server and clients will have the - same default compiled in, which can be very convenient. + same default compiled in, which can be very convenient. Usually + the only good reason to select a non-default value is if you + intend to run multiple PostgreSQL servers on the same machine. --with-CXX @@ -350,19 +355,20 @@ Installation Procedure --with-tclconfig=DIRECTORY, --with-tkconfig=DIRECTORY - Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh" which - contain certain configuration information that is needed to build - modules interfacing to Tcl or Tk. These files are normally found - automatically at their well-known location, but if you want to use - a different version of Tcl or Tk you can specify the directory - where to find them. + Tcl/Tk installs the files "tclConfig.sh" and "tkConfig.sh", which + contain configuration information needed to build modules + interfacing to Tcl or Tk. These files are normally found + automatically at their well-known locations, but if you want to + use a different version of Tcl or Tk you can specify the directory + in which to find them. --enable-odbc Build the ODBC driver. By default, the driver will be independent of a driver manager. To work better with a driver manager already - installed on your system, use one of the following options. More - information can be found in the Programmer's Guide. + installed on your system, use one of the following options in + addition to this one. More information can be found in the + Programmer's Guide. --with-iodbc @@ -385,12 +391,19 @@ Installation Procedure that case the driver manager handles the location of the configuration file. - --with-krb4=DIRECTORY, --with-krb5=DIRECTORY + --with-java + + Build the JDBC driver and associated Java packages. This option + requires Ant to be installed (as well as a JDK, of course). Refer + to the JDBC driver documentation in the Programmer's Guide for + more information. + + --with-krb4[=DIRECTORY], --with-krb5[=DIRECTORY] Build with support for Kerberos authentication. You can use either Kerberos version 4 or 5, but not both. The "DIRECTORY" argument specifies the root directory of the Kerberos installation; - "/usr/athena" is assumed as default. If the relevant headers files + "/usr/athena" is assumed as default. If the relevant header files and libraries are not under a common parent directory, then you must use the "--with-includes" and "--with-libraries" options in addition to this option. If, on the other hand, the required files @@ -406,7 +419,7 @@ Installation Procedure The name of the Kerberos service principal. postgres is the default. There's probably no reason to change this. - --with-openssl=DIRECTORY + --with-openssl[=DIRECTORY] Build with support for SSL (encrypted) connections. This requires the OpenSSL package to be installed. The "DIRECTORY" argument @@ -417,19 +430,16 @@ Installation Procedure to make sure that your OpenSSL installation is sufficient before proceeding. - --with-java + --with-pam - Build the JDBC driver and associated Java packages. This option - requires Ant to be installed (as well as a JDK, of course). Refer - to the JDBC driver documentation in the Programmer's Guide for - more information. + Build with PAM (Pluggable Authentication Modules) support. --enable-syslog Enables the PostgreSQL server to use the syslog logging facility. (Using this option does not mean that you must log with syslog or even that it will be done by default, it simply makes it possible - to turn this option on at run time.) + to turn that option on at run time.) --enable-debug @@ -439,9 +449,10 @@ Installation Procedure considerably, and on non-GCC compilers it usually also disables compiler optimization, causing slowdowns. However, having the symbols available is extremely helpful for dealing with any - problems that may arise. Currently, this option is considered of - marginal value for production installations, but you should have - it on if you are doing development work or running a beta version. + problems that may arise. Currently, this option is recommended for + production installations only if you use GCC. But you should + always have it on if you are doing development work or running a + beta version. --enable-cassert @@ -456,13 +467,22 @@ Installation Procedure you should have it on for development work or when running a beta version. + --enable-depend + + Enables automatic dependency tracking. With this option, the + makefiles are set up so that all affected object files will be + rebuilt when any header file is changed. This is useful if you are + doing development work, but is just wasted overhead if you intend + only to compile once and install. At present, this option will + work only if you use GCC. + If you prefer a C or C++ compiler different from the one "configure" - picks then you can set the environment variables CC and CXX, + picks then you can set the environment variables CC or CXX, respectively, to the program of your choice. Similarly, you can override the default compiler flags with the CFLAGS and CXXFLAGS variables. For example: - env CC=/opt/bin/gcc CFLAGS='-02 -pipe' ./configure + env CC=/opt/bin/gcc CFLAGS='-O2 -pipe' ./configure 2. Build @@ -470,8 +490,9 @@ Installation Procedure gmake - (Remember to use GNU make.) The build can take anywhere from 5 minutes - to half an hour. The last line displayed should be + (Remember to use GNU make.) The build may take anywhere from 5 minutes + to half an hour depending on your hardware. The last line displayed + should be All of PostgreSQL is successfully made. Ready to install. @@ -494,7 +515,7 @@ Installation Procedure 4. Installing The Files Note: If you are upgrading an existing system and are going - to install the new files over the old ones then you should + to install the new files over the old ones, then you should have backed up your data and shut down the old server by now, as explained in the Section called If You Are Upgrading above. @@ -521,11 +542,11 @@ Installation Procedure take the required files and place them in other directories where Perl or Python can find them, but how to do that is left as an exercise. - The standard install installs only the header files needed for client - application development. If you plan to do any server-side program - development (such as custom functions or data types written in C), then - you may want to install the entire PostgreSQL include tree into your - target include directory. To do that, enter + The standard installation provides only the header files needed for + client application development. If you plan to do any server-side + program development (such as custom functions or data types written in + C), then you may want to install the entire PostgreSQL include tree + into your target include directory. To do that, enter gmake install-all-headers @@ -534,24 +555,31 @@ Installation Procedure reference. (If you do, you can just use the source's include directory when building server-side software.) - Client-only installation. If you want to install only the client + Client-only installation: If you want to install only the client applications and interface libraries, then you can use these commands: gmake -C src/bin install + gmake -C src/include install gmake -C src/interfaces install gmake -C doc install To undo the installation use the command "gmake uninstall". However, - this will not remove any directories. + this will not remove any created directories. After the installation you can make room by removing the built files from -the source tree with the "gmake clean" command. This will preserve the -choices made by the configure program, so that you can rebuild everything -with "gmake" later on. To reset the source tree to the state in which it was +the source tree with the "gmake clean" command. This will preserve the files +made by the configure program, so that you can rebuild everything with +"gmake" later on. To reset the source tree to the state in which it was distributed, use "gmake distclean". If you are going to build for several platforms from the same source tree you must do this and re-configure for each build. +If you perform a build and then discover that your configure options were +wrong, or if you change anything that configure investigates (for example, +you install GNU Readline), then it's a good idea to do "gmake distclean" +before reconfiguring and rebuilding. Without this, your changes in +configuration choices may not propagate everywhere they need to. + ------------------------------------------------------------------------ Post-Installation Setup @@ -578,7 +606,7 @@ setenv LD_LIBRARY_PATH /usr/local/pgsql/lib Replace /usr/local/pgsql/lib with whatever you set "--libdir" to in step 1. You should put these commands into a shell start-up file such as "/etc/profile" or "~/.bash_profile". Some good information about the caveats -associated with the method can be found at +associated with this method can be found at http://www.visi.com/~barr/ldpath.html. On some systems it might be preferable to set the environment variable @@ -610,8 +638,8 @@ Environment Variables If you installed into "/usr/local/pgsql" or some other location that is not searched for programs by default, you need to add "/usr/local/pgsql/bin" (or -what you set "--bindir" to in step 1) into your PATH. To do this, add the -following to your shell start-up file, such as "~/.bash_profile" (or +whatever you set "--bindir" to in step 1) into your PATH. To do this, add +the following to your shell start-up file, such as "~/.bash_profile" (or "/etc/profile", if you want it to affect every user): PATH=/usr/local/pgsql/bin:$PATH @@ -628,8 +656,8 @@ MANPATH=/usr/local/pgsql/man:$MANPATH The environment variables PGHOST and PGPORT specify to client applications the host and port of the database server, overriding the compiled-in defaults. If you are going to run client applications remotely then it is -convenient if every user that plans to use the database sets PGHOST, but it -is not required and the settings can be communicated via command line +convenient if every user that plans to use the database sets PGHOST. This is +not required, however: the settings can be communicated via command line options to most client programs. ------------------------------------------------------------------------ @@ -696,15 +724,17 @@ once installed. The Administrator's Guide contains more information. What Now? - * The Tutorial should be your first reading if you are completely new to - SQL databases. It should have been installed at - "/usr/local/pgsql/doc/html/tutorial.html" unless you changed the + * The PostgreSQL distribution contains a comprehensive documentation set, + which you should read sometime. After installation, the documentation + can be accessed by pointing your browser to + "/usr/local/pgsql/doc/html/index.html", unless you changed the installation directories. - * If you are familiar with database concepts then you want to proceed - with the Administrator's Guide, which contains information about how to - set up the database server, database users, and authentication. It can - be found at "/usr/local/pgsql/doc/html/admin.html". + The Tutorial should be your first reading if you are completely new to + SQL databases. If you are familiar with database concepts then you want + to proceed with the Administrator's Guide, which contains information + about how to set up the database server, database users, and + authentication. * Usually, you will want to modify your computer so that it will automatically start the database server whenever it boots. Some @@ -728,109 +758,114 @@ tests pass. supported platform, please write to or , not to the people listed here. - OS Processor Version Reported Remarks - AIX 4.3.3RS6000 7.1 2001-03-21, Gilles Darold see also - () doc/FAQ_AIX - BeOS x86 7.1 2001-02-26, Cyril Velter requires new - 5.0.4 () BONE networking - stack - BSD/OS x86 7.1 2001-03-20, Bruce Momjian - 4.01 () - FreeBSD x86 7.2 2001-11-14, Chris Kings-Lynne + OS Processor Version Reported Remarks + AIX RS6000 7.2 2001-12-19, Andreas Zeugswetter see also + (), doc/FAQ_AIX + Tatsuo Ishii + () + BeOS x86 7.2 2001-11-29, Cyril Velter 5.0.4 + () + BSD/OS x86 7.2 2001-11-27, Bruce Momjian 4.2 + () + FreeBSDAlpha 7.2 2001-12-18, Chris Kings-Lynne () - HP-UX PA-RISC 7.2 2001-11-16, 10.20 Tom Lane 32- and 64-bit - (), 2001-03-22, on 11.00; see - 11.00, 11i Giles Lean also - () doc/FAQ_HPUX - IRIX MIPS 7.1 2001-03-22, Robert Bruccoleri 32-bit - 6.5.11 () compilation - model - Linux Alpha 7.2 2001-11-16, Tom Lane Tested at - 2.2.18 () SourceForge - Linux armv4l 7.1 2001-02-22, Mark Knox - 2.2.x () - Linux MIPS 7.2 2001-11-15, Hisao Shibuya Cobalt Qube2 - 2.0.x () - Linux PPC74xx 7.2 2001-11-16, Tom Lane Apple G3 - 2.2.18 () - Linux S/390 7.1 2000-11-17, Neale Ferguson - () - Linux Sparc 7.1 2001-01-30, Ryan Kirkpatrick - 2.2.15 () - Linux x86 7.2 2001-11-15, Thomas Lockhart 2.0.x, 2.2.x, - () 2.4.x - MacOS X PPC 7.2 2001-11-16, Tom Lane Darwin 10.1 + FreeBSDx86 7.2 2001-11-14, Chris Kings-Lynne + () + HP-UX PA-RISC 7.2 2001-11-29, Joseph Conway 11.00 and 10.20; + (), Tom see also + Lane () doc/FAQ_HPUX + IRIX MIPS 7.2 2001-11-28, Luis Amigo 6.5.13, MIPSPro + () 7.30 + Linux Alpha 7.2 2001-11-16, Tom Lane 2.2.18; tested at + () SourceForge + Linux armv4l 7.2 2001-12-10, Mark Knox 2.2.x + () + Linux MIPS 7.2 2001-11-15, Hisao Shibuya 2.0.x; Cobalt + () Qube2 + Linux PlayStation 7.2 2001-12-12, Permaine Cheung #undef + 2 ) HAS_TEST_AND_SET, + slock_t + Linux PPC74xx 7.2 2001-11-16, Tom Lane 2.2.18; Apple G3 () - NetBSD Alpha 7.2 2001-11-20, Thomas Thai - 1.5W () - NetBSD arm32 7.1 2001-03-21, Patrick Welche - 1.5E () - NetBSD m68k 7.0 2000-04-10, Henry B. Hotz Mac 8xx - () - NetBSD PPC 7.1 2001-04-05, Henry B. Hotz Mac G4 + Linux S/390 7.2 2001-12-12, Permaine Cheung + ) + Linux Sparc 7.2 2001-11-28, Doug McNaught 2.2.19 + () + Linux x86 7.2 2001-11-15, Thomas Lockhart 2.0.x, 2.2.x, + () 2.4.x + MacOS XPPC 7.2 2001-11-28, Gavin Sherry 10.1.x + () + NetBSD Alpha 7.2 2001-11-20, Thomas Thai 1.5W + () + NetBSD arm32 7.1 2001-03-21, Patrick Welche 1.5E + () + NetBSD m68k 7.0 2000-04-10, Henry B. Hotz Mac 8xx () - NetBSD Sparc 7.1 2000-04-05, Matthew Green 32- and 64-bit - () builds - NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo - 1.5 () - NetBSD x86 7.1 2001-03-23, Giles Lean - 1.5 () - OpenBSD Sparc 7.1 2001-03-23, Brandon Palmer - 2.8 () - OpenBSD x86 7.1 2001-03-21, Brandon Palmer - 2.8 () - SCO x86 7.1 2001-03-19, Larry Rosenman UDK FS compiler; - UnixWare () see also - 7.1.1 doc/FAQ_SCO - Solaris Sparc 7.2 2001-11-12, Andrew Sullivan 2.6-8; see also - () doc/FAQ_Solaris - Solaris x86 7.1 2001-03-27, Mathijs Brands see also - 2.8 () doc/FAQ_Solaris - SunOS Sparc 7.1 2001-03-23, Tatsuo Ishii - 4.1.4 () - Tru64 Alpha 7.1 2001-03-26, Adriaan Joubert 4.0-5.0, cc and - UNIX () gcc - Windows x86 7.1 2001-03-16, Jason Tishler with Cygwin tool - NT/2000 () set, see - with doc/FAQ_MSWIN - Cygwin - -Unsupported Platforms. The following platforms have not been verified to -work. Platforms listed for version 6.3.x and later should also work with -7.2, but we did not receive explicit confirmation of such at the time this -list was compiled. We include these here to let you know that these -platforms *could* be supported if given some attention. - - OS ProcessorVersion Reported Remarks - DGUX m88k 6.3 1998-03-01, Brian E Gallew 6.4 probably OK - 5.4R4.11 () - MkLinux DR1 PPC750 7.0 2001-04-03, Tatsuo Ishii 7.1 needs OS - () update? - NextStep x86 6.x 1998-03-01, David Wetzel bit rot suspected - () - QNX 4.25 x86 7.0 2000-04-01, Dr. Andreas Spinlock code - Kardos needs work. See - () also - doc/FAQ_QNX4. - SCO x86 6.5 1999-05-25, Andrew Merrill 7.1 should work, - OpenServer () but no reports; - 5 see also - doc/FAQ_SCO - System V R4 m88k 6.2.1 1998-03-01, Doug Winterburn needs new TAS - () spinlock code - System V R4 MIPS 6.4 1998-10-28, Frank no 64-bit integer - Ridderbusch - () - Ultrix MIPS 7.1 2001-03-26 TAS spinlock code - not detected - Ultrix VAX 6.x 1998-03-01 No recent - reports. - Obsolete? - Windows 9x, x86 7.1 2001-03-26, Magnus Hagander client-side - ME, NT, () libraries (libpq - 2000 and psql) or ODBC - (native) or JDBC, no - server-side; see - Administrator's - Guide for - instructions + NetBSD PPC 7.2 2001-11-28, Bill Studenmund 1.5 + () + NetBSD Sparc 7.2 2001-12-03, Matthew Green 32- and 64-bit + () builds + NetBSD VAX 7.1 2001-03-30, Tom I. Helbekkmo 1.5 + () + NetBSD x86 7.2 2001-11-28, Bill Studenmund 1.5 + () + OpenBSDSparc 7.2 2001-11-27, Brandon Palmer 3.0 + () + OpenBSDx86 7.2 2001-11-26, Brandon Palmer 3.0 + () + Open x86 7.2 2001-11-28, OU-8 Larry Rosenman see also + UNIX (), UW-7 Olivier doc/FAQ_SCO + Prenant () + QNX 4 x86 7.2 2001-12-10, Bernd Tegge 4.25; see also + RTOS () doc/FAQ_QNX4 + SolarisSparc 7.2 2001-11-12, Andrew Sullivan 2.6-8; see also + () doc/FAQ_Solaris + Solarisx86 7.2 2001-11-28, Martin Renters 2.8; see also + () doc/FAQ_Solaris + SunOS 4Sparc 7.2 2001-12-04, Tatsuo Ishii + () + Tru64 Alpha 7.2 2001-11-26, Alessio Bragadini 5.0; 4.0g with cc + UNIX (), Bernd and gcc + Tegge () + Windowsx86 7.2 2001-12-13, Dave Page with Cygwin; see + (), doc/FAQ_MSWIN + Jason Tishler + () + Windowsx86 7.2 2001-12-10, Dave Page native is + () client-side only; + see + Administrator's + Guide + +Unsupported Platforms: The following platforms are either known not to work, +or they used to work in a previous release and we did not receive explicit +confirmation of a successful test with version 7.2 at the time this list was +compiled. We include these here to let you know that these platforms *could* +be supported if given some attention. + + OS Processor Version Reported Remarks + DG/UX m88k 6.3 1998-03-01, Brian E Gallew no recent + 5.4R4.11 () reports + MkLinux DR1PPC750 7.0 2001-04-03, Tatsuo Ishii 7.1 needs OS + () update? + NeXTSTEP x86 6.x 1998-03-01, David Wetzel bit rot + () suspected + QNX RTOS v6x86 7.2 2001-11-20, Igor Kovalenko patches + () available in + archives, + but too late + for 7.2 + SCO x86 6.5 1999-05-25, Andrew Merrill 7.2 should + OpenServer () work, but no + 5 reports; see + also + doc/FAQ_SCO + System V R4m88k 6.2.1 1998-03-01, Doug Winterburn needs new + () TAS spinlock + code + System V R4MIPS 6.4 1998-10-28, Frank Ridderbusch no recent + () reports + Ultrix MIPS 7.1 2001-03-26 TAS spinlock + code not + detected + Ultrix VAX 6.x 1998-03-01 -- 2.40.0