From 551b738f52188caa57668b84174a413beff18bd7 Mon Sep 17 00:00:00 2001 From: Bradley Nicholes Date: Fri, 20 Sep 2002 14:32:47 +0000 Subject: [PATCH] A NetWare version of the httpd.conf file is no longer needed since all of the NetWare differences have been folded into httpd-std.conf.in or added through the mkconfNW.awk script. git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@96928 13f79535-47bb-0310-9956-ffa450edef68 --- docs/conf/httpd-nw.conf | 942 ---------------------------------------- 1 file changed, 942 deletions(-) delete mode 100644 docs/conf/httpd-nw.conf diff --git a/docs/conf/httpd-nw.conf b/docs/conf/httpd-nw.conf deleted file mode 100644 index cd79da8cb1..0000000000 --- a/docs/conf/httpd-nw.conf +++ /dev/null @@ -1,942 +0,0 @@ -# -# Based upon the NCSA server configuration files originally by Rob McCool. -# -# This is the main Apache server configuration file. It contains the -# configuration directives that give the server its instructions. -# See for detailed information about -# the directives. -# -# Do NOT simply read the instructions in here without understanding -# what they do. They're here only as hints or reminders. If you are unsure -# consult the online docs. You have been warned. -# -# The configuration directives are grouped into three basic sections: -# 1. Directives that control the operation of the Apache server process as a -# whole (the 'global environment'). -# 2. Directives that define the parameters of the 'main' or 'default' server, -# which responds to requests that aren't handled by a virtual host. -# These directives also provide default values for the settings -# of all virtual hosts. -# 3. Settings for virtual hosts, which allow Web requests to be sent to -# different IP addresses or hostnames and have them handled by the -# same Apache server process. -# -# Configuration and logfile names: If the filenames you specify for many -# of the server's control files begin with "/" (or "drive:/" for Win32), the -# server will use that explicit path. If the filenames do *not* begin -# with "/", the value of ServerRoot is prepended -- so "logs/foo.log" -# with ServerRoot set to "/usr/local/apache" will be interpreted by the -# server as "/usr/local/apache/logs/foo.log". -# -# NOTE: Where filenames are specified, you must use forward slashes -# instead of backslashes (e.g., "c:/apache" instead of "c:\apache"). -# If a drive letter is omitted, the drive on which Apache.exe is located -# will be used by default. It is recommended that you always supply -# an explicit drive letter in absolute paths, however, to avoid -# confusion. -# - -### Section 1: Global Environment -# -# The directives in this section affect the overall operation of Apache, -# such as the number of concurrent requests it can handle or where it -# can find its configuration files. -# - -# -# ServerRoot: The top of the directory tree under which the server's -# configuration, error, and log files are kept. -# -# Do NOT add a slash at the end of the directory path. -# -ServerRoot "@@ServerRoot@@" - -# -# Timeout: The number of seconds before receives and sends time out. -# -Timeout 300 - -# -# KeepAlive: Whether or not to allow persistent connections (more than -# one request per connection). Set to "Off" to deactivate. -# -KeepAlive On - -# -# MaxKeepAliveRequests: The maximum number of requests to allow -# during a persistent connection. Set to 0 to allow an unlimited amount. -# We recommend you leave this number high, for maximum performance. -# -MaxKeepAliveRequests 100 - -# -# KeepAliveTimeout: Number of seconds to wait for the next request from the -# same client on the same connection. -# -KeepAliveTimeout 15 - -## -## Server-Pool Size Regulation (MPM specific) -## - -# NetWare MPM -# ThreadStackSize ...... Stack size allocated for each worker thread -# StartThreads ......... Number of worker threads launched at server startup -# MinSpareThreads ...... Minimum number of idle threads, to handle request spikes -# MaxSpareThreads ...... Maximum number of idle threads -# MaxThreads ........... Maximum number of worker threads alive at the same time -# MaxRequestsPerChild .. Maximum number of requests a thread serves. It is -# recommended that the default value of 0 be set for this -# directive on NetWare. This will allow the thread to -# continue to service requests indefinitely. - -ThreadStackSize 65536 -StartThreads 250 -MinSpareThreads 25 -MaxSpareThreads 250 -MaxThreads 1000 -MaxRequestsPerChild 0 - - -# -# Listen: Allows you to bind Apache to specific IP addresses and/or -# ports, in addition to the default. See also the -# directive. -# -# Change this to Listen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) -# -#Listen 12.34.56.78:80 -Listen @@Port@@ - -# -# Dynamic Shared Object (DSO) Support -# -# To be able to use the functionality of a module which was built as a DSO you -# have to place corresponding `LoadModule' lines at this location so the -# directives contained in it are actually available _before_ they are used. -# Statically compiled modules (those listed by `httpd -l') do not need -# to be loaded here. -# -#LoadModule auth_anon_module modules/authanon.nlm -#LoadModule auth_dbm_module modules/authdbm.nlm -#LoadModule auth_digest_module modules/digest.nlm -#LoadModule cern_meta_module modules/cernmeta.nlm -#LoadModule dav_module modules/mod_dav.nlm -#LoadModule dav_fs_module modules/moddavfs.nlm -#LoadModule expires_module modules/expires.nlm -#LoadModule file_cache_module modules/filecach.nlm -#LoadModule headers_module modules/headers.nlm -#LoadModule info_module modules/info.nlm -#LoadModule mime_magic_module modules/mimemagi.nlm -#LoadModule proxy_module modules/proxy.nlm -#LoadModule proxy_connect_module modules/proxy_connect.nlm -#LoadModule proxy_http_module modules/proxy_http.nlm -#LoadModule proxy_ftp_module modules/proxy_ftp.nlm -#LoadModule rewrite_module modules/rewrite.nlm -#LoadModule speling_module modules/speling.nlm -#LoadModule status_module modules/status.nlm -#LoadModule unique_id_module modules/uniqueid.nlm -#LoadModule usertrack_module modules/usertrk.nlm -#LoadModule vhost_alias_module modules/vhost.nlm - -# -# ExtendedStatus controls whether Apache will generate "full" status -# information (ExtendedStatus On) or just basic information (ExtendedStatus -# Off) when the "server-status" handler is called. The default is Off. -# -#ExtendedStatus On - -# -# SecureListen: Allows you to securely bind Apache to specific IP addresses -# and/or ports. -# -# Change this to SecureListen on specific IP addresses as shown below to -# prevent Apache from glomming onto all bound IP addresses (0.0.0.0) -# -#SecureListen 12.34.56.78:443 "SSL CertificateIP" -# -#SecureListen @@Port@@ "@@SSL_CERT_NAME@@" - -### Section 2: 'Main' server configuration -# -# The directives in this section set up the values used by the 'main' -# server, which responds to any requests that aren't handled by a -# definition. These values also provide defaults for -# any containers you may define later in the file. -# -# All of these directives may appear inside containers, -# in which case these default settings will be overridden for the -# virtual host being defined. -# - -# -# ServerAdmin: Your address, where problems with the server should be -# e-mailed. This address appears on some server-generated pages, such -# as error documents. e.g. admin@your-domain.com -# -ServerAdmin @@ServerAdmin@@ - -# -# ServerName gives the name and port that the server uses to identify itself. -# This can often be determined automatically, but we recommend you specify -# it explicitly to prevent problems during startup. -# -# If this is not set to valid DNS name for your host, server-generated -# redirections will not work. See also the UseCanonicalName directive. -# -# If your host doesn't have a registered DNS name, enter its IP address here. -# You will have to access it by its address anyway, and this will make -# redirections work in a sensible way. -# -#ServerName new.host.name:80 - -# -# UseCanonicalName: Determines how Apache constructs self-referencing -# URLs and the SERVER_NAME and SERVER_PORT variables. -# When set "Off", Apache will use the Hostname and Port supplied -# by the client. When set "On", Apache will use the value of the -# ServerName directive. -# -UseCanonicalName Off - -# -# DocumentRoot: The directory out of which you will serve your -# documents. By default, all requests are taken from this directory, but -# symbolic links and aliases may be used to point to other locations. -# -DocumentRoot "@@ServerRoot@@/htdocs" - -# -# Each directory to which Apache has access can be configured with respect -# to which services and features are allowed and/or disabled in that -# directory (and its subdirectories). -# -# First, we configure the "default" to be a very restrictive set of -# features. -# - - Options FollowSymLinks - AllowOverride None - - -# -# Note that from this point forward you must specifically allow -# particular features to be enabled - so if something's not working as -# you might expect, make sure that you have specifically enabled it -# below. -# - -# -# This should be changed to whatever you set DocumentRoot to. -# - - -# -# Possible values for the Options directive are "None", "All", -# or any combination of: -# Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI Multiviews -# -# Note that "MultiViews" must be named *explicitly* --- "Options All" -# doesn't give it to you. -# -# The Options directive is both complicated and important. Please see -# http://httpd.apache.org/docs-2.0/mod/core.html#options -# for more information. -# - Options Indexes FollowSymLinks - -# -# AllowOverride controls what directives may be placed in .htaccess files. -# It can be "All", "None", or any combination of the keywords: -# Options FileInfo AuthConfig Limit -# - AllowOverride None - -# -# Controls who can get stuff from this server. -# - Order allow,deny - Allow from all - - - -# -# UserDir: The name of the directory that is appended onto a user's home -# directory if a ~user request is received. Be especially careful to use -# proper, forward slashes here. -# -UserDir "public_html" - -# -# Control access to UserDir directories. The following is an example -# for a site where these directories are restricted to read-only. -# -# You must correct the path for the root to match your system's configured -# user directory location, e.g. "C:/WinNT/profiles/*/My Documents/My Website" -# or whichever, as appropriate. -# -# -# AllowOverride FileInfo AuthConfig Limit -# Options MultiViews Indexes SymLinksIfOwnerMatch IncludesNoExec -# -# Order allow,deny -# Allow from all -# -# -# Order deny,allow -# Deny from all -# -# - -# -# DirectoryIndex: sets the file that Apache will serve if a directory -# is requested. -# -# The index.html.var file (a type-map) is used to deliver content- -# negotiated documents. The MultiViews Option can be used for the -# same purpose, but it is much slower. -# -DirectoryIndex index.html index.html.var - - -# -# AccessFileName: The name of the file to look for in each directory -# for additional configuration directives. See also the AllowOverride -# directive. -# -AccessFileName .htaccess - -# -# The following lines prevent .htaccess and .htpasswd files from being -# viewed by Web clients. -# - - Order allow,deny - Deny from all - - -# -# TypesConfig describes where the mime.types file (or equivalent) is -# to be found. -# -TypesConfig conf/mime.types - -# -# DefaultType is the default MIME type the server will use for a document -# if it cannot otherwise determine one, such as from filename extensions. -# If your server contains mostly text or HTML documents, "text/plain" is -# a good value. If most of your content is binary, such as applications -# or images, you may want to use "application/octet-stream" instead to -# keep browsers from trying to display binary files as though they are -# text. -# -DefaultType text/plain - -# -# The mod_mime_magic module allows the server to use various hints from the -# contents of the file itself to determine its type. The MIMEMagicFile -# directive tells the module where the hint definitions are located. -# - - MIMEMagicFile conf/magic - - -# -# HostnameLookups: Log the names of clients or just their IP addresses -# e.g., www.apache.org (on) or 204.62.129.132 (off). -# The default is off because it'd be overall better for the net if people -# had to knowingly turn this feature on, since enabling it means that -# each client request will result in AT LEAST one lookup request to the -# nameserver. -# -HostnameLookups Off - -# -# ErrorLog: The location of the error log file. -# If you do not specify an ErrorLog directive within a -# container, error messages relating to that virtual host will be -# logged here. If you *do* define an error logfile for a -# container, that host's errors will be logged there and not here. -# -ErrorLog logs/error.log - -# -# LogLevel: Control the number of messages logged to the error.log. -# Possible values include: debug, info, notice, warn, error, crit, -# alert, emerg. -# -LogLevel warn - -# -# The following directives define some format nicknames for use with -# a CustomLog directive (see below). -# -LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined -LogFormat "%h %l %u %t \"%r\" %>s %b" common -LogFormat "%{Referer}i -> %U" referer -LogFormat "%{User-agent}i" agent - -# -# The location and format of the access logfile (Common Logfile Format). -# If you do not define any access logfiles within a -# container, they will be logged here. Contrariwise, if you *do* -# define per- access logfiles, transactions will be -# logged therein and *not* in this file. -# -CustomLog logs/access.log common - -# -# If you would like to have agent and referer logfiles, uncomment the -# following directives. -# -#CustomLog logs/referer.log referer -#CustomLog logs/agent.log agent - -# -# If you prefer a single logfile with access, agent, and referer information -# (Combined Logfile Format) you can use the following directive. -# -#CustomLog logs/access.log combined - -# -# ServerTokens -# This directive configures what you return as the Server HTTP response -# Header. The default is 'Full' which sends information about the OS-Type -# and compiled in modules. -# Set to one of: Full | OS | Minor | Minimal | Major | Prod -# where Full conveys the most information, and Prod the least. -# -ServerTokens Full - -# -# Optionally add a line containing the server version and virtual host -# name to server-generated pages (internal error documents, FTP directory -# listings, mod_status and mod_info output etc., but not CGI generated -# documents or custom error documents). -# Set to "EMail" to also include a mailto: link to the ServerAdmin. -# Set to one of: On | Off | EMail -# -ServerSignature On - -# -# Aliases: Add here as many aliases as you need (with no limit). The format is -# Alias fakename realname -# -# Note that if you include a trailing / on fakename then the server will -# require it to be present in the URL. So "/icons" isn't aliased in this -# example, only "/icons/". If the fakename is slash-terminated, then the -# realname must also be slash terminated, and if the fakename omits the -# trailing slash, the realname must also omit it. -# -# We include the /icons/ alias for FancyIndexed directory listings. If you -# do not use FancyIndexing, you may comment this out. -# -Alias /icons/ "@@ServerRoot@@/icons/" - - - Options Indexes MultiViews - AllowOverride None - Order allow,deny - Allow from all - - -# -# This should be changed to the ServerRoot/manual/. The alias provides -# the manual, even if you choose to move your DocumentRoot. You may comment -# this out if you do not care for the documentation. -# -Alias /manual "@@ServerRoot@@/manual" - - - Options Indexes FollowSymLinks MultiViews IncludesNoExec - AddOutputFilter Includes html - AllowOverride None - Order allow,deny - Allow from all - - -# -# ScriptAlias: This controls which directories contain server scripts. -# ScriptAliases are essentially the same as Aliases, except that -# documents in the realname directory are treated as applications and -# run by the server when requested rather than as documents sent to the client. -# The same rules about trailing "/" apply to ScriptAlias directives as to -# Alias. -# -ScriptAlias /cgi-bin/ "@@ServerRoot@@/cgi-bin/" - -# -# "@@ServerRoot@@/cgi-bin" should be changed to whatever your ScriptAliased -# CGI directory exists, if you have that configured. -# - - AllowOverride None - Options None - Order allow,deny - Allow from all - - -# -# Redirect allows you to tell clients about documents which used to exist in -# your server's namespace, but do not anymore. This allows you to tell the -# clients where to look for the relocated document. -# Example: -# Redirect permanent /foo http://www.example.com/bar - -# -# Directives controlling the display of server-generated directory listings. -# - -# -# IndexOptions: Controls the appearance of server-generated directory -# listings. -# -IndexOptions FancyIndexing VersionSort - -# -# AddIcon* directives tell the server which icon to show for different -# files or filename extensions. These are only displayed for -# FancyIndexed directories. -# -AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip - -AddIconByType (TXT,/icons/text.gif) text/* -AddIconByType (IMG,/icons/image2.gif) image/* -AddIconByType (SND,/icons/sound2.gif) audio/* -AddIconByType (VID,/icons/movie.gif) video/* - -AddIcon /icons/binary.gif .bin .exe -AddIcon /icons/binhex.gif .hqx -AddIcon /icons/tar.gif .tar -AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv -AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip -AddIcon /icons/a.gif .ps .ai .eps -AddIcon /icons/layout.gif .html .shtml .htm .pdf -AddIcon /icons/text.gif .txt -AddIcon /icons/c.gif .c -AddIcon /icons/p.gif .pl .py -AddIcon /icons/f.gif .for -AddIcon /icons/dvi.gif .dvi -AddIcon /icons/uuencoded.gif .uu -AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl -AddIcon /icons/tex.gif .tex -AddIcon /icons/bomb.gif core - -AddIcon /icons/back.gif .. -AddIcon /icons/hand.right.gif README -AddIcon /icons/folder.gif ^^DIRECTORY^^ -AddIcon /icons/blank.gif ^^BLANKICON^^ - -# -# DefaultIcon is which icon to show for files which do not have an icon -# explicitly set. -# -DefaultIcon /icons/unknown.gif - -# -# AddDescription allows you to place a short description after a file in -# server-generated indexes. These are only displayed for FancyIndexed -# directories. -# Format: AddDescription "description" filename -# -#AddDescription "GZIP compressed document" .gz -#AddDescription "tar archive" .tar -#AddDescription "GZIP compressed tar archive" .tgz - -# -# ReadmeName is the name of the README file the server will look for by -# default, and append to directory listings. -# -# HeaderName is the name of a file which should be prepended to -# directory indexes. -ReadmeName README.html -HeaderName HEADER.html - -# -# IndexIgnore is a set of filenames which directory indexing should ignore -# and not include in the listing. Shell-style wildcarding is permitted. -# -IndexIgnore .??* *~ *# HEADER* README* RCS CVS *,v *,t - -# -# AddEncoding allows you to have certain browsers (Mosaic/X 2.1+) uncompress -# information on the fly. Note: Not all browsers support this. -# Despite the name similarity, the following Add* directives have nothing -# to do with the FancyIndexing customization directives above. -# -AddEncoding x-compress Z -AddEncoding x-gzip gz tgz - -# -# DefaultLanguage and AddLanguage allows you to specify the language of -# a document. You can then use content negotiation to give a browser a -# file in a language the user can understand. -# -# Specify a default language. This means that all data -# going out without a specific language tag (see below) will -# be marked with this one. You probably do NOT want to set -# this unless you are sure it is correct for all cases. -# -# * It is generally better to not mark a page as -# * being a certain language than marking it with the wrong -# * language! -# -# DefaultLanguage nl -# -# Note 1: The suffix does not have to be the same as the language -# keyword --- those with documents in Polish (whose net-standard -# language code is pl) may wish to use "AddLanguage pl .po" to -# avoid the ambiguity with the common suffix for perl scripts. -# -# Note 2: The example entries below illustrate that in some cases -# the two character 'Language' abbreviation is not identical to -# the two character 'Country' code for its country, -# E.g. 'Danmark/dk' versus 'Danish/da'. -# -# Note 3: In the case of 'ltz' we violate the RFC by using a three char -# specifier. There is 'work in progress' to fix this and get -# the reference data for rfc1766 cleaned up. -# -# Danish (da) - Dutch (nl) - English (en) - Estonian (et) -# French (fr) - German (de) - Greek-Modern (el) -# Italian (it) - Norwegian (no) - Norwegian Nynorsk (nn) - Korean (ko) -# Portugese (pt) - Luxembourgeois* (ltz) -# Spanish (es) - Swedish (sv) - Catalan (ca) - Czech(cz) -# Polish (pl) - Brazilian Portuguese (pt-br) - Japanese (ja) -# Russian (ru) - Croatian (hr) -# -AddLanguage da .dk -AddLanguage nl .nl -AddLanguage en .en -AddLanguage et .et -AddLanguage fr .fr -AddLanguage de .de -AddLanguage he .he -AddLanguage el .el -AddLanguage it .it -AddLanguage ja .ja -AddLanguage pl .po -AddLanguage ko .ko -AddLanguage pt .pt -AddLanguage nn .nn -AddLanguage no .no -AddLanguage pt-br .pt-br -AddLanguage ltz .ltz -AddLanguage ca .ca -AddLanguage es .es -AddLanguage sv .se -AddLanguage cz .cz -AddLanguage ru .ru -AddLanguage tw .tw -AddLanguage zh-tw .tw -AddLanguage hr .hr - -# -# LanguagePriority allows you to give precedence to some languages -# in case of a tie during content negotiation. -# -# Just list the languages in decreasing order of preference. We have -# more or less alphabetized them here. You probably want to change this. -# -LanguagePriority en da nl et fr de el it ja ko no pl pt pt-br ltz ca es sv tw - -# -# ForceLanguagePriority allows you to serve a result page rather than -# MULTIPLE CHOICES (Prefer) [in case of a tie] or NOT ACCEPTABLE (Fallback) -# [in case no accepted languages matched the available variants] -# -ForceLanguagePriority Prefer Fallback - -# -# Specify a default charset for all pages sent out. This is -# always a good idea and opens the door for future internationalisation -# of your web site, should you ever want it. Specifying it as -# a default does little harm; as the standard dictates that a page -# is in iso-8859-1 (latin1) unless specified otherwise i.e. you -# are merely stating the obvious. There are also some security -# reasons in browsers, related to javascript and URL parsing -# which encourage you to always set a default char set. -# -AddDefaultCharset ISO-8859-1 - -# -# Commonly used filename extensions to character sets. You probably -# want to avoid clashes with the language extensions, unless you -# are good at carefully testing your setup after each change. -# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets for -# the official list of charset names and their respective RFCs -# -AddCharset ISO-8859-1 .iso8859-1 .latin1 -AddCharset ISO-8859-2 .iso8859-2 .latin2 .cen -AddCharset ISO-8859-3 .iso8859-3 .latin3 -AddCharset ISO-8859-4 .iso8859-4 .latin4 -AddCharset ISO-8859-5 .iso8859-5 .latin5 .cyr .iso-ru -AddCharset ISO-8859-6 .iso8859-6 .latin6 .arb -AddCharset ISO-8859-7 .iso8859-7 .latin7 .grk -AddCharset ISO-8859-8 .iso8859-8 .latin8 .heb -AddCharset ISO-8859-9 .iso8859-9 .latin9 .trk -AddCharset ISO-2022-JP .iso2022-jp .jis -AddCharset ISO-2022-KR .iso2022-kr .kis -AddCharset ISO-2022-CN .iso2022-cn .cis -AddCharset Big5 .Big5 .big5 -# For russian, more than one charset is used (depends on client, mostly): -AddCharset WINDOWS-1251 .cp-1251 .win-1251 -AddCharset CP866 .cp866 -AddCharset KOI8-r .koi8-r .koi8-ru -AddCharset KOI8-ru .koi8-uk .ua -AddCharset ISO-10646-UCS-2 .ucs2 -AddCharset ISO-10646-UCS-4 .ucs4 -AddCharset UTF-8 .utf8 - -# The set below does not map to a specific (iso) standard -# but works on a fairly wide range of browsers. Note that -# capitalization actually matters (it should not, but it -# does for some browsers). -# -# See ftp://ftp.isi.edu/in-notes/iana/assignments/character-sets -# for a list of sorts. But browsers support few. -# -AddCharset GB2312 .gb2312 .gb -AddCharset utf-7 .utf7 -AddCharset utf-8 .utf8 -AddCharset big5 .big5 .b5 -AddCharset EUC-TW .euc-tw -AddCharset EUC-JP .euc-jp -AddCharset EUC-KR .euc-kr -AddCharset shift_jis .sjis - -# -# AddType allows you to add to or override the MIME configuration -# file mime.types for specific file types. -# -AddType application/x-tar .tgz -AddType image/x-icon .ico - -# -# AddHandler allows you to map certain file extensions to "handlers": -# actions unrelated to filetype. These can be either built into the server -# or added with the Action directive (see below) -# -# To use CGI scripts outside of ScriptAliased directories: -# (You will also need to add "ExecCGI" to the "Options" directive.) -# -#AddHandler cgi-script .cgi - -# -# For files that include their own HTTP headers: -# -#AddHandler send-as-is asis - -# -# For server-parsed imagemap files: -# -#AddHandler imap-file map - -# -# For type maps (negotiated resources): -# (This is enabled by default to allow the Apache "It Worked" page -# to be distributed in multiple languages.) -# -AddHandler type-map var - -# -# Filters allow you to process content before it is sent to the client. -# -# To parse .shtml files for server-side includes (SSI): -# (You will also need to add "Includes" to the "Options" directive.) -# -#AddType text/html .shtml -#AddOutputFilter INCLUDES .shtml - -# -# Action lets you define media types that will execute a script whenever -# a matching file is called. This eliminates the need for repeated URL -# pathnames for oft-used CGI file processors. -# Format: Action media/type /cgi-script/location -# Format: Action handler-name /cgi-script/location -# - -# -# Customizable error responses come in three flavors: -# 1) plain text 2) local redirects 3) external redirects -# -# Some examples: -#ErrorDocument 500 "The server made a boo boo." -#ErrorDocument 404 /missing.html -#ErrorDocument 404 "/cgi-bin/missing_handler.pl" -#ErrorDocument 402 http://www.example.com/subscription_info.html -# - -# -# Putting this all together, we can internationalize error responses. -# -# We use Alias to redirect any /error/HTTP_.html.var response to -# our collection of by-error message multi-language collections. We use -# includes to substitute the appropriate text. -# -# You can modify the messages' appearance without changing any of the -# default HTTP_.html.var files by adding the line: -# -# Alias /error/include/ "/your/include/path/" -# -# which allows you to create your own set of files by starting with the -# @exp_errordir@/include/ files and copying them to /your/include/path/, -# even on a per-VirtualHost basis. The default include files will display -# your Apache version number and your ServerAdmin email address regardless -# of the setting of ServerSignature. -# -# The internationalized error documents require mod_alias, mod_include -# and mod_negotiation. To activate them, uncomment the following 30 lines. - -# Alias /error/ "@exp_errordir@/" -# -# -# AllowOverride None -# Options IncludesNoExec -# AddOutputFilter Includes html -# AddHandler type-map var -# Order allow,deny -# Allow from all -# LanguagePriority en de es fr it nl sv -# ForceLanguagePriority Prefer Fallback -# -# -# ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var -# ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var -# ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var -# ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var -# ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var -# ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var -# ErrorDocument 410 /error/HTTP_GONE.html.var -# ErrorDocument 411 /error/HTTP_LENGTH_REQUIRED.html.var -# ErrorDocument 412 /error/HTTP_PRECONDITION_FAILED.html.var -# ErrorDocument 413 /error/HTTP_REQUEST_ENTITY_TOO_LARGE.html.var -# ErrorDocument 414 /error/HTTP_REQUEST_URI_TOO_LARGE.html.var -# ErrorDocument 415 /error/HTTP_SERVICE_UNAVAILABLE.html.var -# ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var -# ErrorDocument 501 /error/HTTP_NOT_IMPLEMENTED.html.var -# ErrorDocument 502 /error/HTTP_BAD_GATEWAY.html.var -# ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var -# ErrorDocument 506 /error/HTTP_VARIANT_ALSO_VARIES.html.var - -# -# The following directives modify normal HTTP response behavior to -# handle known problems with browser implementations. -# -BrowserMatch "Mozilla/2" nokeepalive -BrowserMatch "MSIE 4\.0b2;" nokeepalive downgrade-1.0 force-response-1.0 -BrowserMatch "RealPlayer 4\.0" force-response-1.0 -BrowserMatch "Java/1\.0" force-response-1.0 -BrowserMatch "JDK/1\.0" force-response-1.0 - -# -# The following directive disables redirects on non-GET requests for -# a directory that does not include the trailing slash. This fixes a -# problem with Microsoft WebFolders which does not appropriately handle -# redirects for folders with DAV methods. -# Same deal with Apple's DAV filesystem. -# -BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully -BrowserMatch "^WebDrive" redirect-carefully -BrowserMatch "^WebDAVFS/1.[012]" redirect-carefully - -# -# Allow server status reports generated by mod_status, -# with the URL of http://servername/server-status -# Change the ".@@DomainName@@" to match your domain to enable. -# -# -# SetHandler server-status -# Order deny,allow -# Deny from all -# Allow from .@@DomainName@@ -# - -# -# Allow remote server configuration reports, with the URL of -# http://servername/server-info (requires that mod_info.c be loaded). -# Change the ".@@DomainName@@" to match your domain to enable. -# -# -# SetHandler server-info -# Order deny,allow -# Deny from all -# Allow from .@@DomainName@@ -# - -# -# Proxy Server directives. Uncomment the following lines to -# enable the proxy server: -# -# -#ProxyRequests On -# -# -# Order deny,allow -# Deny from all -# Allow from .example.com -# - -# -# Enable/disable the handling of HTTP/1.1 "Via:" headers. -# ("Full" adds the server version; "Block" removes all outgoing Via: headers) -# Set to one of: Off | On | Full | Block -# -#ProxyVia On - -# -# To enable the cache as well, edit and uncomment the following lines: -# (no cacheing without CacheRoot) -# -#CacheRoot "@@ServerRoot@@/proxy" -#CacheSize 5 -#CacheGcInterval 4 -#CacheMaxExpire 24 -#CacheLastModifiedFactor 0.1 -#CacheDefaultExpire 1 -#NoCache a-domain.com another-domain.edu joes.garage-sale.com - -# -# End of proxy directives. - -# -# Bring in additional module-specific configurations -# - - Include conf/ssl.conf - - - -### Section 3: Virtual Hosts -# -# VirtualHost: If you want to maintain multiple domains/hostnames on your -# machine you can setup VirtualHost containers for them. Most configurations -# use only name-based virtual hosts so the server doesn't need to worry about -# IP addresses. This is indicated by the asterisks in the directives below. -# -# Please see the documentation at -# -# for further details before you try to setup virtual hosts. -# -# You may use the command line option '-S' to verify your virtual host -# configuration. - -# -# Use name-based virtual hosting. -# -#NameVirtualHost * - -# -# VirtualHost example: -# Almost any Apache directive may go into a VirtualHost container. -# The first VirtualHost section is used for requests without a known -# server name. -# -# -# ServerAdmin webmaster@dummy-host.example.com -# DocumentRoot /www/docs/dummy-host.example.com -# ServerName dummy-host.example.com -# ErrorLog logs/dummy-host.example.com-error_log -# CustomLog logs/dummy-host.example.com-access_log common -# -- 2.40.0