From 2c4834f87af4beec4b16157622c85d2850cce25f Mon Sep 17 00:00:00 2001
From: Brian Behlendorf <behlendorf1@llnl.gov>
Date: Fri, 10 Sep 2010 21:44:17 -0700
Subject: [PATCH] Wait up to timeout seconds for udev device

Occasional failures were observed in zconfig.sh because udev
could be delayed for a few seconds.  To handle this the wait_udev
function has been added to wait for timeout seconds for an
expected device before returning an error.  By default callers
currently use a 30 seconds timeout which should be much longer
than udev ever needs but not so long to worry the test suite
is hung.
---
 scripts/common.sh.in | 17 +++++++++++++++++
 scripts/zconfig.sh   | 17 +++++++++++------
 scripts/zfs.sh       |  1 +
 3 files changed, 29 insertions(+), 6 deletions(-)

diff --git a/scripts/common.sh.in b/scripts/common.sh.in
index 65e897d85..57508be9f 100644
--- a/scripts/common.sh.in
+++ b/scripts/common.sh.in
@@ -441,3 +441,20 @@ run_test() {
 		skip_one_test ${TEST_NUM} "${TEST_NAME}"
 	fi
 }
+
+wait_udev() {
+	local DEVICE=$1
+	local DELAY=$2
+	local COUNT=0
+
+	while [ ! -e ${DEVICE} ]; do
+		if [ ${COUNT} -gt ${DELAY} ]; then
+			return 1
+		fi
+
+		let COUNT=${COUNT}+1
+	        sleep 1
+	done
+
+	return 0
+}
diff --git a/scripts/zconfig.sh b/scripts/zconfig.sh
index f741d4e54..3d965bbca 100755
--- a/scripts/zconfig.sh
+++ b/scripts/zconfig.sh
@@ -148,7 +148,7 @@ zconfig_zvol_device_stat() {
 	local COUNT=0
 
 	# Briefly delay for udev
-	sleep 1
+	sleep 3
 
 	# Pool exists
 	stat ${POOL_NAME} &>/dev/null   && let COUNT=$COUNT+1
@@ -348,7 +348,8 @@ test_6() {
 	mount /dev/${FULL_ZVOL_NAME}1 /tmp/${ZVOL_NAME}1 || fail 7
 
 	# Snapshot the pristine ext2 filesystem and mount it read-only.
-	${ZFS} snapshot ${FULL_SNAP_NAME} && sleep 1 || fail 8
+	${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
+	wait_udev /dev/${FULL_SNAP_NAME}1 30 || fail 8
 	mkdir -p /tmp/${SNAP_NAME}1 || fail 9
 	mount /dev/${FULL_SNAP_NAME}1 /tmp/${SNAP_NAME}1 &>/dev/null || fail 10
 
@@ -407,7 +408,8 @@ test_7() {
 	mount /dev/${FULL_ZVOL_NAME}1 /tmp/${ZVOL_NAME}1 || fail 7
 
 	# Snapshot the pristine ext2 filesystem and mount it read-only.
-	${ZFS} snapshot ${FULL_SNAP_NAME} && sleep 1 || fail 8
+	${ZFS} snapshot ${FULL_SNAP_NAME} || fail 8
+	wait_udev /dev/${FULL_SNAP_NAME}1 30 || fail 8
 	mkdir -p /tmp/${SNAP_NAME}1 || fail 9
 	mount /dev/${FULL_SNAP_NAME}1 /tmp/${SNAP_NAME}1 &>/dev/null || fail 10
 
@@ -421,7 +423,8 @@ test_7() {
 	diff -ur ${SRC_DIR} /tmp/${SNAP_NAME}1${SRC_DIR} &>/dev/null && fail 13
 
 	# Clone from the original pristine snapshot
-	${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} && sleep 1 || fail 14
+	${ZFS} clone ${FULL_SNAP_NAME} ${FULL_CLONE_NAME} || fail 14
+	wait_udev /dev/${FULL_CLONE_NAME}1 30 || fail 14
 	mkdir -p /tmp/${CLONE_NAME}1 || fail 15
 	mount /dev/${FULL_CLONE_NAME}1 /tmp/${CLONE_NAME}1 || fail 16
 
@@ -491,11 +494,13 @@ test_8() {
 	sync || fail 9
 
 	# Snapshot the ext3 filesystem so it may be sent.
-	${ZFS} snapshot ${FULL_SNAP_NAME1} && sleep 1 || fail 11
+	${ZFS} snapshot ${FULL_SNAP_NAME1} || fail 11
+	wait_udev /dev/${FULL_SNAP_NAME1} 30 || fail 11
 
 	# Send/receive the snapshot from POOL_NAME1 to POOL_NAME2
 	(${ZFS} send ${FULL_SNAP_NAME1} | \
-	${ZFS} receive ${FULL_ZVOL_NAME2}) && sleep 1 || fail 12
+	${ZFS} receive ${FULL_ZVOL_NAME2}) || fail 12
+	wait_udev /dev/${FULL_ZVOL_NAME2}1 30 || fail 12
 
 	# Mount the sent ext3 filesystem.
 	mkdir -p /tmp/${FULL_ZVOL_NAME2}1 || fail 13
diff --git a/scripts/zfs.sh b/scripts/zfs.sh
index 523fbfcc0..6060fbaa8 100755
--- a/scripts/zfs.sh
+++ b/scripts/zfs.sh
@@ -69,6 +69,7 @@ if [ ${UNLOAD} ]; then
 else
 	check_modules || die "${ERROR}"
 	load_modules "$@"
+	wait_udev /dev/zfs 30
 fi
 
 exit 0
-- 
2.40.0