From 1818572d8395743704d917d91c3b909dd0a973d6 Mon Sep 17 00:00:00 2001 From: Andy Polyakov Date: Wed, 18 Mar 2015 16:56:38 +0100 Subject: [PATCH] Configure: remove unused variables. Reviewed-by: Richard Levitte --- Configurations/10-main.conf | 11 +++++++++-- Configure | 31 ------------------------------- 2 files changed, 9 insertions(+), 33 deletions(-) diff --git a/Configurations/10-main.conf b/Configurations/10-main.conf index 9d38554477..7cd109c790 100644 --- a/Configurations/10-main.conf +++ b/Configurations/10-main.conf @@ -760,13 +760,20 @@ perlasm_scheme => "o32", }, -#### *BSD [do see comment about ${BSDthreads} in Configure!] +#### *BSD "BSD-generic32" => { + # As for thread_cflag. Idea is to maintain "collective" set of + # flags, which would cover all BSD flavors. -pthread applies + # to them all, but is treated differently. OpenBSD expands is + # as -D_POSIX_THREAD -lc_r, which is sufficient. FreeBSD 4.x + # expands it as -lc_r, which has to be accompanied by explicit + # -D_THREAD_SAFE and sometimes -D_REENTRANT. FreeBSD 5.x + # expands it as -lc_r, which seems to be sufficient? cc => "gcc", cflags => "-Wall", debug_cflags => "-O0 -g", release_cflags => "-O3", - thread_cflag => "${BSDthreads}", + thread_cflag => "-pthread -D_THREAD_SAFE -D_REENTRANT", bn_ops => "BN_LLONG RC2_CHAR RC4_INDEX DES_INT DES_UNROLL", dso_scheme => "dlfcn", shared_target => "bsd-gcc-shared", diff --git a/Configure b/Configure index 5993f9b237..a35bafd0f9 100755 --- a/Configure +++ b/Configure @@ -121,42 +121,11 @@ my $x86_gcc_des="DES_PTR DES_RISC1 DES_UNROLL"; # MD2_CHAR slags pentium pros my $x86_gcc_opts="RC4_INDEX MD2_INT"; -# MODIFY THESE PARAMETERS IF YOU ARE GOING TO USE THE 'util/speed.sh SCRIPT -# Don't worry about these normally - -my $tcc="cc"; -my $tflags="-fast -Xa"; -my $tbn_mul=""; -my $tlib="-lnsl -lsocket"; #$bits1="SIXTEEN_BIT "; #$bits2="THIRTY_TWO_BIT "; my $bits1="THIRTY_TWO_BIT "; my $bits2="SIXTY_FOUR_BIT "; -my $x86_asm="x86cpuid.o:bn-586.o co-586.o x86-mont.o x86-gf2m.o:ecp_nistz256.o ecp_nistz256-x86.o:des-586.o crypt586.o:aes-586.o vpaes-x86.o aesni-x86.o:bf-586.o:md5-586.o:sha1-586.o sha256-586.o sha512-586.o:cast-586.o:rc4-586.o:rmd-586.o:rc5-586.o:wp_block.o wp-mmx.o:cmll-x86.o:ghash-x86.o:e_padlock-x86.o"; -my $x86_asm_nocast=$x86_asm;$x86_asm_nocast=~s/cast\-586\.o//; - -my $x86_elf_asm="$x86_asm:elf"; -my $android_x86_elf_asm="$x86_asm:android"; - -my $x86_64_asm="x86_64cpuid.o:x86_64-gcc.o x86_64-mont.o x86_64-mont5.o x86_64-gf2m.o rsaz_exp.o rsaz-x86_64.o rsaz-avx2.o:ecp_nistz256.o ecp_nistz256-x86_64.o::aes-x86_64.o vpaes-x86_64.o bsaes-x86_64.o aesni-x86_64.o aesni-sha1-x86_64.o aesni-sha256-x86_64.o aesni-mb-x86_64.o::md5-x86_64.o:sha1-x86_64.o sha256-x86_64.o sha512-x86_64.o sha1-mb-x86_64.o sha256-mb-x86_64.o::rc4-x86_64.o rc4-md5-x86_64.o:::wp-x86_64.o:cmll-x86_64.o cmll_misc.o:ghash-x86_64.o aesni-gcm-x86_64.o:e_padlock-x86_64.o"; -my $win_x86_64_asm=$x86_asm;$win_x86_64_asm=~s/x86_64-gcc\.o/bn_asm.o/; -my $ia64_asm="ia64cpuid.o:bn-ia64.o ia64-mont.o:::aes_core.o aes_cbc.o aes-ia64.o::md5-ia64.o:sha1-ia64.o sha256-ia64.o sha512-ia64.o::rc4-ia64.o rc4_skey.o:::::ghash-ia64.o::void"; -my $sparcv9_asm="sparcv9cap.o sparccpuid.o:bn-sparcv9.o sparcv9-mont.o sparcv9a-mont.o vis3-mont.o sparct4-mont.o sparcv9-gf2m.o::des_enc-sparc.o fcrypt_b.o dest4-sparcv9.o:aes_core.o aes_cbc.o aes-sparcv9.o aest4-sparcv9.o::md5-sparcv9.o:sha1-sparcv9.o sha256-sparcv9.o sha512-sparcv9.o::::::camellia.o cmll_misc.o cmll_cbc.o cmllt4-sparcv9.o:ghash-sparcv9.o::void"; -my $sparcv8_asm=":sparcv8.o::des_enc-sparc.o fcrypt_b.o:::::::::::::void"; -my $alpha_asm="alphacpuid.o:bn_asm.o alpha-mont.o::::::sha1-alpha.o:::::::ghash-alpha.o::void"; -my $mips64_asm=":bn-mips.o mips-mont.o:::aes_cbc.o aes-mips.o:::sha1-mips.o sha256-mips.o sha512-mips.o::::::::"; -my $mips32_asm=$mips64_asm; $mips32_asm =~ s/\s*sha512\-mips\.o//; -my $s390x_asm="s390xcap.o s390xcpuid.o:bn-s390x.o s390x-mont.o s390x-gf2m.o:::aes-s390x.o aes-ctr.o aes-xts.o:::sha1-s390x.o sha256-s390x.o sha512-s390x.o::rc4-s390x.o:::::ghash-s390x.o:"; -my $s390x_32_asm=$s390x_asm;$s390x_32_asm=~s/bn\-s390x\.o/bn_asm.o/; -my $armv4_asm="armcap.o armv4cpuid.o:bn_asm.o armv4-mont.o armv4-gf2m.o:ecp_nistz256.o ecp_nistz256-armv4.o::aes_cbc.o aes-armv4.o bsaes-armv7.o aesv8-armx.o:::sha1-armv4-large.o sha256-armv4.o sha512-armv4.o:::::::ghash-armv4.o ghashv8-armx.o::void"; -my $aarch64_asm="armcap.o arm64cpuid.o mem_clr.o::::aes_core.o aes_cbc.o aesv8-armx.o:::sha1-armv8.o sha256-armv8.o sha512-armv8.o:::::::ghashv8-armx.o:"; -my $parisc11_asm="pariscid.o:bn_asm.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::32"; -my $parisc20_64_asm="pariscid.o:pa-risc2W.o parisc-mont.o:::aes_core.o aes_cbc.o aes-parisc.o:::sha1-parisc.o sha256-parisc.o sha512-parisc.o::rc4-parisc.o:::::ghash-parisc.o::64"; -my $parisc20_32_asm=$parisc20_64_asm;$parisc20_32_asm=~s/2W\./2\./;$parisc20_32_asm=~s/:64/:32/; -my $ppc64_asm="ppccpuid.o ppccap.o:bn-ppc.o ppc-mont.o ppc64-mont.o:::aes_core.o aes_cbc.o aes-ppc.o vpaes-ppc.o aesp8-ppc.o:::sha1-ppc.o sha256-ppc.o sha512-ppc.o sha256p8-ppc.o sha512p8-ppc.o:::::::ghashp8-ppc.o:"; -my $ppc32_asm=$ppc64_asm; - # As for $BSDthreads. Idea is to maintain "collective" set of flags, # which would cover all BSD flavors. -pthread applies to them all, # but is treated differently. OpenBSD expands is as -D_POSIX_THREAD -- 2.40.0