From 1600c3144c986c4f43a26a3a3547ae8a21d8309b Mon Sep 17 00:00:00 2001 From: Renz Christian Bagaporo Date: Thu, 22 Nov 2018 22:03:35 +0800 Subject: [PATCH] docs: add pyparsing install to setup guide --- docs/en/get-started-cmake/linux-setup-scratch.rst | 4 ++-- docs/en/get-started-cmake/linux-setup.rst | 4 ++-- docs/en/get-started/linux-setup-scratch.rst | 4 ++-- docs/en/get-started/linux-setup.rst | 4 ++-- docs/zh_CN/get-started-cmake/linux-setup-scratch.rst | 4 ++-- docs/zh_CN/get-started-cmake/linux-setup.rst | 4 ++-- docs/zh_CN/get-started/linux-setup-scratch.rst | 4 ++-- docs/zh_CN/get-started/linux-setup.rst | 4 ++-- 8 files changed, 16 insertions(+), 16 deletions(-) diff --git a/docs/en/get-started-cmake/linux-setup-scratch.rst b/docs/en/get-started-cmake/linux-setup-scratch.rst index 05393dddca..a5e62b1df1 100644 --- a/docs/en/get-started-cmake/linux-setup-scratch.rst +++ b/docs/en/get-started-cmake/linux-setup-scratch.rst @@ -19,11 +19,11 @@ To compile with ESP-IDF you need to get the following packages: - Ubuntu and Debian:: - sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache + sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache .. note:: CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake". diff --git a/docs/en/get-started-cmake/linux-setup.rst b/docs/en/get-started-cmake/linux-setup.rst index de5d429e83..bc98abea10 100644 --- a/docs/en/get-started-cmake/linux-setup.rst +++ b/docs/en/get-started-cmake/linux-setup.rst @@ -17,11 +17,11 @@ To compile with ESP-IDF you need to get the following packages: - Ubuntu and Debian:: - sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache + sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache .. note:: CMake version 3.5 or newer is required for use with ESP-IDF. Older Linux distributions may require updating, enabling of a "backports" repository, or installing of a "cmake3" package rather than "cmake". diff --git a/docs/en/get-started/linux-setup-scratch.rst b/docs/en/get-started/linux-setup-scratch.rst index b14530f6d4..cf6efa3739 100644 --- a/docs/en/get-started/linux-setup-scratch.rst +++ b/docs/en/get-started/linux-setup-scratch.rst @@ -13,11 +13,11 @@ To compile with ESP-IDF you need to get the following packages: - Ubuntu and Debian:: - sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial + sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing .. note:: diff --git a/docs/en/get-started/linux-setup.rst b/docs/en/get-started/linux-setup.rst index c97abda3e9..e418bd224e 100644 --- a/docs/en/get-started/linux-setup.rst +++ b/docs/en/get-started/linux-setup.rst @@ -14,11 +14,11 @@ To compile with ESP-IDF you need to get the following packages: - Ubuntu and Debian:: - sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-cryptography python-future + sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-cryptography python-future python-pyparsing - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-cryptography python2-future + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-cryptography python2-future python2-pyparsing .. note:: diff --git a/docs/zh_CN/get-started-cmake/linux-setup-scratch.rst b/docs/zh_CN/get-started-cmake/linux-setup-scratch.rst index 52e4f36649..48ac2c3653 100644 --- a/docs/zh_CN/get-started-cmake/linux-setup-scratch.rst +++ b/docs/zh_CN/get-started-cmake/linux-setup-scratch.rst @@ -19,11 +19,11 @@ - Ubuntu 和 Debian:: - sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache + sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache .. note:: 使用 ESP-IDF 需要 CMake 3.5 或以上版本。较早版本的 Linux 可能需要升级才能向后移植仓库，或安装 "cmake3" 软件包，而不是安装 "cmake"。 diff --git a/docs/zh_CN/get-started-cmake/linux-setup.rst b/docs/zh_CN/get-started-cmake/linux-setup.rst index 00bd9f772a..fa657c5ba1 100644 --- a/docs/zh_CN/get-started-cmake/linux-setup.rst +++ b/docs/zh_CN/get-started-cmake/linux-setup.rst @@ -17,11 +17,11 @@ Linux 平台工具链的标准设置 (CMake) - Ubuntu 和 Debian:: - sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial cmake ninja-build ccache + sudo apt-get install git wget libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing cmake ninja-build ccache - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial cmake ninja ccache + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing cmake ninja ccache .. note:: 使用 ESP-IDF 需要 CMake 3.5 或以上版本。较早版本的 Linux 可能需要升级才能向后移植仓库，或安装 "cmake3" 软件包，而不是安装 "cmake"。 diff --git a/docs/zh_CN/get-started/linux-setup-scratch.rst b/docs/zh_CN/get-started/linux-setup-scratch.rst index e7abf81b5d..afeafa8521 100644 --- a/docs/zh_CN/get-started/linux-setup-scratch.rst +++ b/docs/zh_CN/get-started/linux-setup-scratch.rst @@ -14,11 +14,11 @@ - Ubuntu 和 Debian:: - sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial + sudo apt-get install git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing .. note:: diff --git a/docs/zh_CN/get-started/linux-setup.rst b/docs/zh_CN/get-started/linux-setup.rst index 3457fd7a4a..06caaa3403 100644 --- a/docs/zh_CN/get-started/linux-setup.rst +++ b/docs/zh_CN/get-started/linux-setup.rst @@ -16,11 +16,11 @@ Linux 平台工具链的标准设置 - Ubuntu and Debian:: - sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial + sudo apt-get install gcc git wget make libncurses-dev flex bison gperf python python-pip python-setuptools python-serial python-pyparsing - Arch:: - sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial + sudo pacman -S --needed gcc git make ncurses flex bison gperf python2-pyserial python2-pyparsing .. note:: -- 2.40.0