From 13d856e177e69083f543d6383eeda9e12ce3c55c Mon Sep 17 00:00:00 2001 From: Heikki Linnakangas Date: Wed, 29 Jul 2015 19:17:02 +0300 Subject: [PATCH] Make TAP tests work on Windows. On Windows, use listen_address=127.0.0.1 to allow TCP connections. We were already using "pg_regress --config-auth" to set up HBA appropriately. The standard_initdb helper function now sets up the server's unix_socket_directories or listen_addresses in the config file, so that they don't need to be specified in the pg_ctl command line anymore. That way, the pg_ctl invocations in test programs don't need to differ between Windows and Unix. Add another helper function to configure the server's pg_hba.conf to allow replication connections. The configuration is done similarly to "pg_regress --config-auth": trust on domain sockets on Unix, and SSPI authentication on Windows. Replace calls to "cat" and "touch" programs with built-in perl code, as those programs don't normally exist on Windows. Add instructions in the docs on how to install IPC::Run on Windows. Adjust vcregress.pl to not replace PERL5LIB completely in vcregress.pl, because otherwise cannot install IPC::Run in a non-standard location easily. Michael Paquier, reviewed by Noah Misch, some additional tweaking by me. --- doc/src/sgml/install-windows.sgml | 24 ++++ src/Makefile.global.in | 2 +- src/bin/pg_basebackup/t/010_pg_basebackup.pl | 139 ++++++++++--------- src/bin/pg_ctl/t/001_start_stop.pl | 14 +- src/bin/pg_ctl/t/002_status.pl | 4 - src/bin/pg_rewind/RewindTest.pm | 21 +-- src/test/perl/TestLib.pm | 76 ++++++++-- src/tools/msvc/clean.bat | 7 + src/tools/msvc/vcregress.pl | 46 +++++- 9 files changed, 232 insertions(+), 101 deletions(-) diff --git a/doc/src/sgml/install-windows.sgml b/doc/src/sgml/install-windows.sgml index d154b4408c..1a0fd2808b 100644 --- a/doc/src/sgml/install-windows.sgml +++ b/doc/src/sgml/install-windows.sgml @@ -439,6 +439,7 @@ $ENV{CONFIG}="Debug"; vcregress modulescheck vcregress ecpgcheck vcregress isolationcheck +vcregress tapcheck vcregress upgradecheck @@ -451,6 +452,29 @@ $ENV{CONFIG}="Debug"; For more information about the regression tests, see . + + + Running the TAP regression tests, with "vcregress tapcheck", requires an + additional Perl module to be installed: + + + IPC::Run + + As of this writing, IPC::Run is not included in the + ActiveState Perl installation, nor in the ActiveState Perl Package + Manager (PPM) library. To install, download the + IPC-Run-<version>.tar.gz source archive from CPAN, + at , and + uncompress. Edit the buildenv.pl file, and add a PERL5LIB + variable to point to the lib subdirectory from the + extracted archive. For example: + +$ENV{PERL5LIB}=$ENV{PERL5LIB} . ';c:\IPC-Run-0.94\lib'; + + + + + diff --git a/src/Makefile.global.in b/src/Makefile.global.in index e87885bb2b..1704ae0d10 100644 --- a/src/Makefile.global.in +++ b/src/Makefile.global.in @@ -339,7 +339,7 @@ endef define prove_check rm -rf $(CURDIR)/tmp_check/log -cd $(srcdir) && TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' top_builddir='$(CURDIR)/$(top_builddir)' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl +cd $(srcdir) && TESTDIR='$(CURDIR)' $(with_temp_install) PGPORT='6$(DEF_PGPORT)' PG_REGRESS='$(CURDIR)/$(top_builddir)/src/test/regress/pg_regress' $(PROVE) $(PG_PROVE_FLAGS) $(PROVE_FLAGS) t/*.pl endef else diff --git a/src/bin/pg_basebackup/t/010_pg_basebackup.pl b/src/bin/pg_basebackup/t/010_pg_basebackup.pl index b605fa91c0..4dbf8ca522 100644 --- a/src/bin/pg_basebackup/t/010_pg_basebackup.pl +++ b/src/bin/pg_basebackup/t/010_pg_basebackup.pl @@ -1,6 +1,7 @@ use strict; use warnings; use Cwd; +use Config; use TestLib; use Test::More tests => 51; @@ -25,11 +26,7 @@ if (open BADCHARS, ">>$tempdir/pgdata/FOO\xe0\xe0\xe0BAR") close BADCHARS; } -open HBA, ">>$tempdir/pgdata/pg_hba.conf"; -print HBA "local replication all trust\n"; -print HBA "host replication all 127.0.0.1/32 trust\n"; -print HBA "host replication all ::1/128 trust\n"; -close HBA; +configure_hba_for_replication "$tempdir/pgdata"; system_or_bail 'pg_ctl', '-D', "$tempdir/pgdata", 'reload'; command_fails( @@ -62,61 +59,6 @@ command_ok([ 'pg_basebackup', '-D', "$tempdir/tarbackup", '-Ft' ], 'tar format'); ok(-f "$tempdir/tarbackup/base.tar", 'backup tar was created'); -my $superlongname = "superlongname_" . ("x" x 100); - -system_or_bail 'touch', "$tempdir/pgdata/$superlongname"; -command_fails([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l1", '-Ft' ], - 'pg_basebackup tar with long name fails'); -unlink "$tempdir/pgdata/$superlongname"; - -# Create a temporary directory in the system location and symlink it -# to our physical temp location. That way we can use shorter names -# for the tablespace directories, which hopefully won't run afoul of -# the 99 character length limit. -my $shorter_tempdir = tempdir_short . "/tempdir"; -symlink "$tempdir", $shorter_tempdir; - -mkdir "$tempdir/tblspc1"; -psql 'postgres', - "CREATE TABLESPACE tblspc1 LOCATION '$shorter_tempdir/tblspc1';"; -psql 'postgres', "CREATE TABLE test1 (a int) TABLESPACE tblspc1;"; -command_ok([ 'pg_basebackup', '-D', "$tempdir/tarbackup2", '-Ft' ], - 'tar format with tablespaces'); -ok(-f "$tempdir/tarbackup2/base.tar", 'backup tar was created'); -my @tblspc_tars = glob "$tempdir/tarbackup2/[0-9]*.tar"; -is(scalar(@tblspc_tars), 1, 'one tablespace tar was created'); - -command_fails( - [ 'pg_basebackup', '-D', "$tempdir/backup1", '-Fp' ], - 'plain format with tablespaces fails without tablespace mapping'); - -command_ok( - [ 'pg_basebackup', '-D', "$tempdir/backup1", '-Fp', - "-T$shorter_tempdir/tblspc1=$tempdir/tbackup/tblspc1" ], - 'plain format with tablespaces succeeds with tablespace mapping'); -ok(-d "$tempdir/tbackup/tblspc1", 'tablespace was relocated'); -opendir(my $dh, "$tempdir/pgdata/pg_tblspc") or die; -ok( ( grep { - -l "$tempdir/backup1/pg_tblspc/$_" - and readlink "$tempdir/backup1/pg_tblspc/$_" eq - "$tempdir/tbackup/tblspc1" - } readdir($dh)), - "tablespace symlink was updated"); -closedir $dh; - -mkdir "$tempdir/tbl=spc2"; -psql 'postgres', "DROP TABLE test1;"; -psql 'postgres', "DROP TABLESPACE tblspc1;"; -psql 'postgres', - "CREATE TABLESPACE tblspc2 LOCATION '$shorter_tempdir/tbl=spc2';"; -command_ok( - [ 'pg_basebackup', '-D', "$tempdir/backup3", '-Fp', - "-T$shorter_tempdir/tbl\\=spc2=$tempdir/tbackup/tbl\\=spc2" ], - 'mapping tablespace with = sign in path'); -ok(-d "$tempdir/tbackup/tbl=spc2", 'tablespace with = sign was relocated'); - -psql 'postgres', "DROP TABLESPACE tblspc2;"; - command_fails( [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-T=/foo" ], '-T with empty old directory fails'); @@ -137,12 +79,75 @@ command_fails( [ 'pg_basebackup', '-D', "$tempdir/backup_foo", '-Fp', "-Tfoo" ], '-T with invalid format fails'); -mkdir "$tempdir/$superlongname"; -psql 'postgres', - "CREATE TABLESPACE tblspc3 LOCATION '$tempdir/$superlongname';"; -command_ok([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l3", '-Ft' ], - 'pg_basebackup tar with long symlink target'); -psql 'postgres', "DROP TABLESPACE tblspc3;"; +# Tar format doesn't support filenames longer than 100 bytes. +my $superlongname = "superlongname_" . ("x" x 100); +my $superlongpath = "$tempdir/pgdata/$superlongname"; + +open FILE, ">$superlongpath" or die "unable to create file $superlongpath"; +close FILE; +command_fails([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l1", '-Ft' ], + 'pg_basebackup tar with long name fails'); +unlink "$tempdir/pgdata/$superlongname"; + +# The following tests test symlinks. Windows doesn't have symlinks, so +# skip on Windows. +SKIP: { + skip "symlinks not supported on Windows", 10 if ($Config{osname} eq "MSWin32"); + + # Create a temporary directory in the system location and symlink it + # to our physical temp location. That way we can use shorter names + # for the tablespace directories, which hopefully won't run afoul of + # the 99 character length limit. + my $shorter_tempdir = tempdir_short . "/tempdir"; + symlink "$tempdir", $shorter_tempdir; + + mkdir "$tempdir/tblspc1"; + psql 'postgres', + "CREATE TABLESPACE tblspc1 LOCATION '$shorter_tempdir/tblspc1';"; + psql 'postgres', "CREATE TABLE test1 (a int) TABLESPACE tblspc1;"; + command_ok([ 'pg_basebackup', '-D', "$tempdir/tarbackup2", '-Ft' ], + 'tar format with tablespaces'); + ok(-f "$tempdir/tarbackup2/base.tar", 'backup tar was created'); + my @tblspc_tars = glob "$tempdir/tarbackup2/[0-9]*.tar"; + is(scalar(@tblspc_tars), 1, 'one tablespace tar was created'); + + command_fails( + [ 'pg_basebackup', '-D', "$tempdir/backup1", '-Fp' ], + 'plain format with tablespaces fails without tablespace mapping'); + + command_ok( + [ 'pg_basebackup', '-D', "$tempdir/backup1", '-Fp', + "-T$shorter_tempdir/tblspc1=$tempdir/tbackup/tblspc1" ], + 'plain format with tablespaces succeeds with tablespace mapping'); + ok(-d "$tempdir/tbackup/tblspc1", 'tablespace was relocated'); + opendir(my $dh, "$tempdir/pgdata/pg_tblspc") or die; + ok( ( grep { + -l "$tempdir/backup1/pg_tblspc/$_" + and readlink "$tempdir/backup1/pg_tblspc/$_" eq + "$tempdir/tbackup/tblspc1" + } readdir($dh)), + "tablespace symlink was updated"); + closedir $dh; + + mkdir "$tempdir/tbl=spc2"; + psql 'postgres', "DROP TABLE test1;"; + psql 'postgres', "DROP TABLESPACE tblspc1;"; + psql 'postgres', + "CREATE TABLESPACE tblspc2 LOCATION '$shorter_tempdir/tbl=spc2';"; + command_ok( + [ 'pg_basebackup', '-D', "$tempdir/backup3", '-Fp', + "-T$shorter_tempdir/tbl\\=spc2=$tempdir/tbackup/tbl\\=spc2" ], + 'mapping tablespace with = sign in path'); + ok(-d "$tempdir/tbackup/tbl=spc2", 'tablespace with = sign was relocated'); + psql 'postgres', "DROP TABLESPACE tblspc2;"; + + mkdir "$tempdir/$superlongname"; + psql 'postgres', + "CREATE TABLESPACE tblspc3 LOCATION '$tempdir/$superlongname';"; + command_ok([ 'pg_basebackup', '-D', "$tempdir/tarbackup_l3", '-Ft' ], + 'pg_basebackup tar with long symlink target'); + psql 'postgres', "DROP TABLESPACE tblspc3;"; +} command_ok([ 'pg_basebackup', '-D', "$tempdir/backupR", '-R' ], 'pg_basebackup -R runs'); @@ -169,7 +174,7 @@ is($lsn, '', 'restart LSN of new slot is null'); command_ok([ 'pg_basebackup', '-D', "$tempdir/backupxs_sl", '-X', 'stream', '-S', 'slot1' ], 'pg_basebackup -X stream with replication slot runs'); $lsn = psql 'postgres', q{SELECT restart_lsn FROM pg_replication_slots WHERE slot_name = 'slot1'}; -like($lsn, qr!^0/[0-9A-Z]{8}$!, 'restart LSN of slot has advanced'); +like($lsn, qr!^0/[0-9A-Z]{7,8}$!, 'restart LSN of slot has advanced'); command_ok([ 'pg_basebackup', '-D', "$tempdir/backupxs_sl_R", '-X', 'stream', '-S', 'slot1', '-R' ], 'pg_basebackup with replication slot and -R runs'); diff --git a/src/bin/pg_ctl/t/001_start_stop.pl b/src/bin/pg_ctl/t/001_start_stop.pl index bcceb57d7b..015e4d8931 100644 --- a/src/bin/pg_ctl/t/001_start_stop.pl +++ b/src/bin/pg_ctl/t/001_start_stop.pl @@ -1,5 +1,6 @@ use strict; use warnings; +use Config; use TestLib; use Test::More tests => 17; @@ -15,12 +16,19 @@ command_exit_is([ 'pg_ctl', 'start', '-D', "$tempdir/nonexistent" ], command_ok([ 'pg_ctl', 'initdb', '-D', "$tempdir/data" ], 'pg_ctl initdb'); command_ok( - [ "$ENV{top_builddir}/src/test/regress/pg_regress", '--config-auth', + [ $ENV{PG_REGRESS}, '--config-auth', "$tempdir/data" ], 'configure authentication'); open CONF, ">>$tempdir/data/postgresql.conf"; -print CONF "listen_addresses = ''\n"; -print CONF "unix_socket_directories = '$tempdir_short'\n"; +if ($Config{osname} ne "MSWin32") +{ + print CONF "listen_addresses = ''\n"; + print CONF "unix_socket_directories = '$tempdir_short'\n"; +} +else +{ + print CONF "listen_addresses = '127.0.0.1'\n"; +} close CONF; command_ok([ 'pg_ctl', 'start', '-D', "$tempdir/data", '-w' ], 'pg_ctl start -w'); diff --git a/src/bin/pg_ctl/t/002_status.pl b/src/bin/pg_ctl/t/002_status.pl index ec0a2a786e..31f7c722f1 100644 --- a/src/bin/pg_ctl/t/002_status.pl +++ b/src/bin/pg_ctl/t/002_status.pl @@ -10,10 +10,6 @@ command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/nonexistent" ], 4, 'pg_ctl status with nonexistent directory'); standard_initdb "$tempdir/data"; -open CONF, ">>$tempdir/data/postgresql.conf"; -print CONF "listen_addresses = ''\n"; -print CONF "unix_socket_directories = '$tempdir_short'\n"; -close CONF; command_exit_is([ 'pg_ctl', 'status', '-D', "$tempdir/data" ], 3, 'pg_ctl status with server not running'); diff --git a/src/bin/pg_rewind/RewindTest.pm b/src/bin/pg_rewind/RewindTest.pm index 755ecb7438..85edf2b3ca 100644 --- a/src/bin/pg_rewind/RewindTest.pm +++ b/src/bin/pg_rewind/RewindTest.pm @@ -192,20 +192,15 @@ max_connections = 10 )); # Accept replication connections on master - append_to_file( - "$test_master_datadir/pg_hba.conf", qq( -local replication all trust -)); + configure_hba_for_replication $test_master_datadir; system_or_bail('pg_ctl' , '-w', '-D' , $test_master_datadir, '-l', "$log_path/master.log", - "-o", "-k $tempdir_short --listen-addresses='' -p $port_master", - 'start'); + "-o", "-p $port_master", 'start'); #### Now run the test-specific parts to initialize the master before setting # up standby - $ENV{PGHOST} = $tempdir_short; } sub create_standby @@ -227,8 +222,7 @@ recovery_target_timeline='latest' # Start standby system_or_bail('pg_ctl', '-w', '-D', $test_standby_datadir, '-l', "$log_path/standby.log", - '-o', "-k $tempdir_short --listen-addresses='' -p $port_standby", - 'start'); + '-o', "-p $port_standby", 'start'); # Wait until the standby has caught up with the primary, by polling # pg_stat_replication. @@ -264,7 +258,7 @@ sub run_pg_rewind my $test_mode = shift; # Stop the master and be ready to perform the rewind - system_or_bail('pg_ctl', '-D', $test_master_datadir, 'stop', '-m', 'fast'); + system_or_bail('pg_ctl', '-D', $test_master_datadir, '-m', 'fast', 'stop'); # At this point, the rewind processing is ready to run. # We now have a very simple scenario with a few diverged WAL record. @@ -282,8 +276,8 @@ sub run_pg_rewind { # Do rewind using a local pgdata as source # Stop the master and be ready to perform the rewind - system_or_bail('pg_ctl', '-D', $test_standby_datadir, 'stop', - '-m', 'fast'); + system_or_bail('pg_ctl', '-D', $test_standby_datadir, + '-m', 'fast', 'stop'); command_ok(['pg_rewind', "--debug", "--source-pgdata=$test_standby_datadir", @@ -323,8 +317,7 @@ recovery_target_timeline='latest' # Restart the master to check that rewind went correctly system_or_bail('pg_ctl', '-w', '-D', $test_master_datadir, '-l', "$log_path/master.log", - '-o', "-k $tempdir_short --listen-addresses='' -p $port_master", - 'start'); + '-o', "-p $port_master", 'start'); #### Now run the test-specific parts to check the result } diff --git a/src/test/perl/TestLib.pm b/src/test/perl/TestLib.pm index 1f69931fe1..6677a57990 100644 --- a/src/test/perl/TestLib.pm +++ b/src/test/perl/TestLib.pm @@ -3,11 +3,13 @@ package TestLib; use strict; use warnings; +use Config; use Exporter 'import'; our @EXPORT = qw( tempdir tempdir_short standard_initdb + configure_hba_for_replication start_test_server restart_test_server psql @@ -119,29 +121,74 @@ sub tempdir_short return File::Temp::tempdir(CLEANUP => 1); } +# Initialize a new cluster for testing. +# +# The PGHOST environment variable is set to connect to the new cluster. +# +# Authentication is set up so that only the current OS user can access the +# cluster. On Unix, we use Unix domain socket connections, with the socket in +# a directory that's only accessible to the current user to ensure that. +# On Windows, we use SSPI authentication to ensure the same (by pg_regress +# --config-auth). sub standard_initdb { my $pgdata = shift; system_or_bail('initdb', '-D', "$pgdata", '-A' , 'trust', '-N'); - system_or_bail("$ENV{top_builddir}/src/test/regress/pg_regress", - '--config-auth', $pgdata); + system_or_bail($ENV{PG_REGRESS}, '--config-auth', $pgdata); + + my $tempdir_short = tempdir_short; + + open CONF, ">>$pgdata/postgresql.conf"; + print CONF "\n# Added by TestLib.pm)\n"; + if ($Config{osname} eq "MSWin32") + { + print CONF "listen_addresses = '127.0.0.1'\n"; + } + else + { + print CONF "unix_socket_directories = '$tempdir_short'\n"; + print CONF "listen_addresses = ''\n"; + } + close CONF; + + $ENV{PGHOST} = ($Config{osname} eq "MSWin32") ? "127.0.0.1" : $tempdir_short; +} + +# Set up the cluster to allow replication connections, in the same way that +# standard_initdb does for normal connections. +sub configure_hba_for_replication +{ + my $pgdata = shift; + + open HBA, ">>$pgdata/pg_hba.conf"; + print HBA "\n# Allow replication (set up by TestLib.pm)\n"; + if ($Config{osname} ne "MSWin32") + { + print HBA "local replication all trust\n"; + } + else + { + print HBA "host replication all 127.0.0.1/32 sspi include_realm=1 map=regress\n"; + } + close HBA; } my ($test_server_datadir, $test_server_logfile); + +# Initialize a new cluster for testing in given directory, and start it. sub start_test_server { my ($tempdir) = @_; my $ret; - my $tempdir_short = tempdir_short; - print("### Starting test server in $tempdir\n"); standard_initdb "$tempdir/pgdata"; + $ret = system_log('pg_ctl', '-D', "$tempdir/pgdata", '-w', '-l', - "$log_path/postmaster.log", '-o', -"--fsync=off -k \"$tempdir_short\" --listen-addresses='' --log-statement=all", - 'start'); + "$log_path/postmaster.log", '-o', "--fsync=off --log-statement=all", + 'start'); + if ($ret != 0) { print "# pg_ctl failed; logfile:\n"; @@ -149,7 +196,6 @@ sub start_test_server BAIL_OUT("pg_ctl failed"); } - $ENV{PGHOST} = $tempdir_short; $test_server_datadir = "$tempdir/pgdata"; $test_server_logfile = "$log_path/postmaster.log"; } @@ -242,7 +288,17 @@ sub command_exit_is print("# Running: " . join(" ", @{$cmd}) ."\n"); my $h = start $cmd; $h->finish(); - is($h->result(0), $expected, $test_name); + + # On Windows, the exit status of the process is returned directly as the + # process's exit code, while on Unix, it's returned in the high bits + # of the exit code (see WEXITSTATUS macro in the standard + # header file). IPC::Run's result function always returns exit code >> 8, + # assuming the Unix convention, which will always return 0 on Windows as + # long as the process was not terminated by an exception. To work around + # that, use $h->full_result on Windows instead. + my $result = ($Config{osname} eq "MSWin32") ? + ($h->full_results)[0] : $h->result(0); + is($result, $expected, $test_name); } sub program_help_ok @@ -295,7 +351,7 @@ sub issues_sql_like truncate $test_server_logfile, 0; my $result = run_log($cmd); ok($result, "@$cmd exit code 0"); - my $log = `cat '$test_server_logfile'`; + my $log = slurp_file($test_server_logfile); like($log, $expected_sql, "$test_name: SQL found in server log"); } diff --git a/src/tools/msvc/clean.bat b/src/tools/msvc/clean.bat index fbe3cc6744..e3da6aa282 100755 --- a/src/tools/msvc/clean.bat +++ b/src/tools/msvc/clean.bat @@ -88,6 +88,13 @@ if exist src\test\regress\regress.dll del /q src\test\regress\regress.dll if exist src\test\regress\refint.dll del /q src\test\regress\refint.dll if exist src\test\regress\autoinc.dll del /q src\test\regress\autoinc.dll +if exist src\bin\initdb\tmp_check rd /s /q src\bin\initdb\tmp_check +if exist src\bin\pg_basebackup\tmp_check rd /s /q src\bin\pg_basebackup\tmp_check +if exist src\bin\pg_config\tmp_check rd /s /q src\bin\pg_config\tmp_check +if exist src\bin\pg_ctl\tmp_check rd /s /q src\bin\pg_ctl\tmp_check +if exist src\bin\pg_rewind\tmp_check rd /s /q src\bin\pg_rewind\tmp_check +if exist src\bin\scripts\tmp_check rd /s /q src\bin\scripts\tmp_check + REM Clean up datafiles built with contrib REM cd contrib REM for /r %%f in (*.sql) do if exist %%f.in del %%f diff --git a/src/tools/msvc/vcregress.pl b/src/tools/msvc/vcregress.pl index 6196383615..92b98e765f 100644 --- a/src/tools/msvc/vcregress.pl +++ b/src/tools/msvc/vcregress.pl @@ -7,7 +7,9 @@ use strict; our $config; use Cwd; +use File::Basename; use File::Copy; +use File::Find (); use Install qw(Install); @@ -32,7 +34,7 @@ if (-e "src/tools/msvc/buildenv.pl") my $what = shift || ""; if ($what =~ -/^(check|installcheck|plcheck|contribcheck|modulescheck|ecpgcheck|isolationcheck|upgradecheck)$/i +/^(check|installcheck|plcheck|contribcheck|modulescheck|ecpgcheck|isolationcheck|upgradecheck|tapcheck)$/i ) { $what = uc $what; @@ -59,7 +61,7 @@ unless ($schedule) $schedule = "parallel" if ($what eq 'CHECK' || $what =~ /PARALLEL/); } -$ENV{PERL5LIB} = "$topdir/src/tools/msvc"; +$ENV{PERL5LIB} = "$topdir/src/tools/msvc;$ENV{PERL5LIB}"; my $maxconn = ""; $maxconn = "--max_connections=$ENV{MAX_CONNECTIONS}" @@ -79,6 +81,7 @@ my %command = ( CONTRIBCHECK => \&contribcheck, MODULESCHECK => \&modulescheck, ISOLATIONCHECK => \&isolationcheck, + TAPCHECK => \&tapcheck, UPGRADECHECK => \&upgradecheck,); my $proc = $command{$what}; @@ -172,6 +175,45 @@ sub isolationcheck exit $status if $status; } +sub tapcheck +{ + InstallTemp(); + + my @args = ( "prove", "--verbose", "t/*.pl"); + + $ENV{PATH} = "$tmp_installdir/bin;$ENV{PATH}"; + $ENV{PERL5LIB} = "$topdir/src/test/perl;$ENV{PERL5LIB}"; + $ENV{PG_REGRESS} = "$topdir/$Config/pg_regress/pg_regress"; + + # Find out all the existing TAP tests by looking for t/ directories + # in the tree. + my $tap_dirs = []; + my @top_dir = ($topdir); + File::Find::find( + { wanted => sub { + /^t\z/s + && push(@$tap_dirs, $File::Find::name); + } + }, + @top_dir); + + # Process each test + foreach my $test_path (@$tap_dirs) + { + # Like on Unix "make check-world", don't run the SSL test suite + # automatically. + next if ($test_path =~ /\/src\/test\/ssl\//); + + my $dir = dirname($test_path); + chdir $dir; + # Reset those values, they may have been changed by another test. + $ENV{TESTDIR} = "$dir"; + system(@args); + my $status = $? >> 8; + exit $status if $status; + } +} + sub plcheck { chdir $startdir; -- 2.40.0