From 08c47796185ba6b5d65faf1bb63dabb1f028a86f Mon Sep 17 00:00:00 2001 From: Guenter Knauf Date: Sun, 4 Oct 2009 20:03:02 +0000 Subject: [PATCH] added mod_reqtimeout to NetWare build; fixed some NWGNU* properties. git-svn-id: https://svn.apache.org/repos/asf/httpd/httpd/trunk@821595 13f79535-47bb-0310-9956-ffa450edef68 --- modules/filters/NWGNUmakefile | 1 + modules/filters/NWGNUmodbuffer | 516 ++++++++++++++++---------------- modules/filters/NWGNUratelimit | 516 ++++++++++++++++---------------- modules/filters/NWGNUreqtimeout | 258 ++++++++++++++++ 4 files changed, 775 insertions(+), 516 deletions(-) create mode 100644 modules/filters/NWGNUreqtimeout diff --git a/modules/filters/NWGNUmakefile b/modules/filters/NWGNUmakefile index 2873d0b6be..dde92cbc81 100644 --- a/modules/filters/NWGNUmakefile +++ b/modules/filters/NWGNUmakefile @@ -160,6 +160,7 @@ TARGET_nlm = \ $(OBJDIR)/modsed.nlm \ $(OBJDIR)/modbuffer.nlm \ $(OBJDIR)/ratelimit.nlm \ + $(OBJDIR)/reqtimeout.nlm \ $(EOLIST) # If the zlib libraries source exists then build the mod_deflate module diff --git a/modules/filters/NWGNUmodbuffer b/modules/filters/NWGNUmodbuffer index 1ee29fd7b2..e82360539f 100644 --- a/modules/filters/NWGNUmodbuffer +++ b/modules/filters/NWGNUmodbuffer @@ -1,258 +1,258 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = modbuffer - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Buffer Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = modbuffer - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/modbuffer.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_buffer.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - buffer_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(AP_WORK)/include \ + $(NWOS) \ + $(AP_WORK)/modules/arch/netware \ + $(APR)/include \ + $(APRUTIL)/include \ + $(APR) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = modbuffer + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Buffer Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = modbuffer + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/modbuffer.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_buffer.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + buffer_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/filters/NWGNUratelimit b/modules/filters/NWGNUratelimit index 25ffa5b986..bd2e2ac114 100644 --- a/modules/filters/NWGNUratelimit +++ b/modules/filters/NWGNUratelimit @@ -1,258 +1,258 @@ -# -# Declare the sub-directories to be built here -# - -SUBDIRS = \ - $(EOLIST) - -# -# Get the 'head' of the build environment. This includes default targets and -# paths to tools -# - -include $(AP_WORK)\build\NWGNUhead.inc - -# -# build this level's files - -# -# Make sure all needed macro's are defined -# - -# -# These directories will be at the beginning of the include list, followed by -# INCDIRS -# -XINCDIRS += \ - $(AP_WORK)/include \ - $(NWOS) \ - $(AP_WORK)/modules/arch/netware \ - $(APR)/include \ - $(APRUTIL)/include \ - $(APR) \ - $(EOLIST) - -# -# These flags will come after CFLAGS -# -XCFLAGS += \ - $(EOLIST) - -# -# These defines will come after DEFINES -# -XDEFINES += \ - $(EOLIST) - -# -# These flags will be added to the link.opt file -# -XLFLAGS += \ - $(EOLIST) - -# -# These values will be appended to the correct variables based on the value of -# RELEASE -# -ifeq "$(RELEASE)" "debug" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "noopt" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -ifeq "$(RELEASE)" "release" -XINCDIRS += \ - $(EOLIST) - -XCFLAGS += \ - $(EOLIST) - -XDEFINES += \ - $(EOLIST) - -XLFLAGS += \ - $(EOLIST) -endif - -# -# These are used by the link target if an NLM is being generated -# This is used by the link 'name' directive to name the nlm. If left blank -# TARGET_nlm (see below) will be used. -# -NLM_NAME = ratelimit - -# -# This is used by the link '-desc ' directive. -# If left blank, NLM_NAME will be used. -# -NLM_DESCRIPTION = Apache $(VERSION_STR) Rate Limit Module - -# -# This is used by the '-threadname' directive. If left blank, -# NLM_NAME Thread will be used. -# -NLM_THREAD_NAME = ratelimit - -# -# If this is specified, it will override VERSION value in -# $(AP_WORK)\build\NWGNUenvironment.inc -# -NLM_VERSION = - -# -# If this is specified, it will override the default of 64K -# -NLM_STACK_SIZE = 8192 - - -# -# If this is specified it will be used by the link '-entry' directive -# -NLM_ENTRY_SYM = _LibCPrelude - -# -# If this is specified it will be used by the link '-exit' directive -# -NLM_EXIT_SYM = _LibCPostlude - -# -# If this is specified it will be used by the link '-check' directive -# -NLM_CHECK_SYM = - -# -# If these are specified it will be used by the link '-flags' directive -# -NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION - -# -# If this is specified it will be linked in with the XDCData option in the def -# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled -# by setting APACHE_UNIPROC in the environment -# -XDCDATA = - -# -# If there is an NLM target, put it here -# -TARGET_nlm = \ - $(OBJDIR)/ratelimit.nlm \ - $(EOLIST) - -# -# If there is an LIB target, put it here -# -TARGET_lib = \ - $(EOLIST) - -# -# These are the OBJ files needed to create the NLM target above. -# Paths must all use the '/' character -# -FILES_nlm_objs = \ - $(OBJDIR)/mod_ratelimit.o \ - $(EOLIST) - -# -# These are the LIB files needed to create the NLM target above. -# These will be added as a library command in the link.opt file. -# -FILES_nlm_libs = \ - libcpre.o \ - $(EOLIST) - -# -# These are the modules that the above NLM target depends on to load. -# These will be added as a module command in the link.opt file. -# -FILES_nlm_modules = \ - aprlib \ - libc \ - $(EOLIST) - -# -# If the nlm has a msg file, put it's path here -# -FILE_nlm_msg = - -# -# If the nlm has a hlp file put it's path here -# -FILE_nlm_hlp = - -# -# If this is specified, it will override $(NWOS)\copyright.txt. -# -FILE_nlm_copyright = - -# -# Any additional imports go here -# -FILES_nlm_Ximports = \ - @$(APR)/aprlib.imp \ - @$(NWOS)/httpd.imp \ - @libc.imp \ - $(EOLIST) - -# -# Any symbols exported to here -# -FILES_nlm_exports = \ - ratelimit_module \ - $(EOLIST) - -# -# These are the OBJ files needed to create the LIB target above. -# Paths must all use the '/' character -# -FILES_lib_objs = \ - $(EOLIST) - -# -# implement targets and dependancies (leave this section alone) -# - -libs :: $(OBJDIR) $(TARGET_lib) - -nlms :: libs $(TARGET_nlm) - -# -# Updated this target to create necessary directories and copy files to the -# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) -# -install :: nlms FORCE - -# -# Any specialized rules here -# - -# -# Include the 'tail' makefile that has targets that depend on variables defined -# in this makefile -# - -include $(AP_WORK)\build\NWGNUtail.inc - - +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(AP_WORK)/include \ + $(NWOS) \ + $(AP_WORK)/modules/arch/netware \ + $(APR)/include \ + $(APRUTIL)/include \ + $(APR) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = ratelimit + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Rate Limit Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = ratelimit + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/ratelimit.nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_ratelimit.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + ratelimit_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + diff --git a/modules/filters/NWGNUreqtimeout b/modules/filters/NWGNUreqtimeout new file mode 100644 index 0000000000..bb682fa1df --- /dev/null +++ b/modules/filters/NWGNUreqtimeout @@ -0,0 +1,258 @@ +# +# Declare the sub-directories to be built here +# + +SUBDIRS = \ + $(EOLIST) + +# +# Get the 'head' of the build environment. This includes default targets and +# paths to tools +# + +include $(AP_WORK)\build\NWGNUhead.inc + +# +# build this level's files + +# +# Make sure all needed macro's are defined +# + +# +# These directories will be at the beginning of the include list, followed by +# INCDIRS +# +XINCDIRS += \ + $(AP_WORK)/include \ + $(NWOS) \ + $(AP_WORK)/modules/arch/netware \ + $(APR)/include \ + $(APRUTIL)/include \ + $(APR) \ + $(EOLIST) + +# +# These flags will come after CFLAGS +# +XCFLAGS += \ + $(EOLIST) + +# +# These defines will come after DEFINES +# +XDEFINES += \ + $(EOLIST) + +# +# These flags will be added to the link.opt file +# +XLFLAGS += \ + $(EOLIST) + +# +# These values will be appended to the correct variables based on the value of +# RELEASE +# +ifeq "$(RELEASE)" "debug" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "noopt" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +ifeq "$(RELEASE)" "release" +XINCDIRS += \ + $(EOLIST) + +XCFLAGS += \ + $(EOLIST) + +XDEFINES += \ + $(EOLIST) + +XLFLAGS += \ + $(EOLIST) +endif + +# +# These are used by the link target if an NLM is being generated +# This is used by the link 'name' directive to name the nlm. If left blank +# TARGET_nlm (see below) will be used. +# +NLM_NAME = reqtimeout + +# +# This is used by the link '-desc ' directive. +# If left blank, NLM_NAME will be used. +# +NLM_DESCRIPTION = Apache $(VERSION_STR) Request Timeout Module + +# +# This is used by the '-threadname' directive. If left blank, +# NLM_NAME Thread will be used. +# +NLM_THREAD_NAME = $(NLM_NAME) + +# +# If this is specified, it will override VERSION value in +# $(AP_WORK)\build\NWGNUenvironment.inc +# +NLM_VERSION = + +# +# If this is specified, it will override the default of 64K +# +NLM_STACK_SIZE = 8192 + + +# +# If this is specified it will be used by the link '-entry' directive +# +NLM_ENTRY_SYM = _LibCPrelude + +# +# If this is specified it will be used by the link '-exit' directive +# +NLM_EXIT_SYM = _LibCPostlude + +# +# If this is specified it will be used by the link '-check' directive +# +NLM_CHECK_SYM = + +# +# If these are specified it will be used by the link '-flags' directive +# +NLM_FLAGS = AUTOUNLOAD, PSEUDOPREEMPTION + +# +# If this is specified it will be linked in with the XDCData option in the def +# file instead of the default of $(NWOS)/apache.xdc. XDCData can be disabled +# by setting APACHE_UNIPROC in the environment +# +XDCDATA = + +# +# If there is an NLM target, put it here +# +TARGET_nlm = \ + $(OBJDIR)/$(NLM_NAME).nlm \ + $(EOLIST) + +# +# If there is an LIB target, put it here +# +TARGET_lib = \ + $(EOLIST) + +# +# These are the OBJ files needed to create the NLM target above. +# Paths must all use the '/' character +# +FILES_nlm_objs = \ + $(OBJDIR)/mod_reqtimeout.o \ + $(EOLIST) + +# +# These are the LIB files needed to create the NLM target above. +# These will be added as a library command in the link.opt file. +# +FILES_nlm_libs = \ + libcpre.o \ + $(EOLIST) + +# +# These are the modules that the above NLM target depends on to load. +# These will be added as a module command in the link.opt file. +# +FILES_nlm_modules = \ + aprlib \ + libc \ + $(EOLIST) + +# +# If the nlm has a msg file, put it's path here +# +FILE_nlm_msg = + +# +# If the nlm has a hlp file put it's path here +# +FILE_nlm_hlp = + +# +# If this is specified, it will override $(NWOS)\copyright.txt. +# +FILE_nlm_copyright = + +# +# Any additional imports go here +# +FILES_nlm_Ximports = \ + @$(APR)/aprlib.imp \ + @$(NWOS)/httpd.imp \ + @libc.imp \ + $(EOLIST) + +# +# Any symbols exported to here +# +FILES_nlm_exports = \ + reqtimeout_module \ + $(EOLIST) + +# +# These are the OBJ files needed to create the LIB target above. +# Paths must all use the '/' character +# +FILES_lib_objs = \ + $(EOLIST) + +# +# implement targets and dependancies (leave this section alone) +# + +libs :: $(OBJDIR) $(TARGET_lib) + +nlms :: libs $(TARGET_nlm) + +# +# Updated this target to create necessary directories and copy files to the +# correct place. (See $(AP_WORK)\build\NWGNUhead.inc for examples) +# +install :: nlms FORCE + +# +# Any specialized rules here +# + +# +# Include the 'tail' makefile that has targets that depend on variables defined +# in this makefile +# + +include $(AP_WORK)\build\NWGNUtail.inc + + -- 2.40.0