From 0898033b1e36b3341f27c3c0c8dc53b9859c30ca Mon Sep 17 00:00:00 2001 From: Neil Conway Date: Sun, 1 Jan 2006 10:13:56 +0000 Subject: [PATCH] Remove DOS line endings ("\r\n") from several .po files. DOS line endings are inconsistent with the rest of the .po files, and apparently cause problems for Sun's cc. Per report on IRC from "bitvector2". --- src/backend/po/zh_TW.po | 25686 +++++++++++++-------------- src/bin/initdb/po/zh_TW.po | 1148 +- src/bin/pg_config/po/zh_TW.po | 288 +- src/bin/pg_controldata/po/zh_CN.po | 6 +- src/bin/pg_ctl/po/zh_TW.po | 1006 +- src/bin/pg_resetxlog/po/zh_CN.po | 6 +- src/bin/psql/po/zh_CN.po | 10 +- src/bin/scripts/po/it.po | 1410 +- src/interfaces/libpq/po/zh_CN.po | 180 +- 9 files changed, 14870 insertions(+), 14870 deletions(-) diff --git a/src/backend/po/zh_TW.po b/src/backend/po/zh_TW.po index a60e034d16..2e2b31bcf6 100644 --- a/src/backend/po/zh_TW.po +++ b/src/backend/po/zh_TW.po @@ -1,12844 +1,12844 @@ -# 2004-12-13 Zhenbang Wei -# 2004-08-06 JiaYun -# -msgid "" -msgstr "" -"Project-Id-Version: PostgreSQL 8.0\n" -"POT-Creation-Date: 2004-12-13 00:59+0000\n" -"PO-Revision-Date: 2004-12-13 14:45+0800\n" -"Last-Translator: Zhenbang Wei \n" -"Language-Team: Zhenbang Wei \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" -"Content-Transfer-Encoding: 8bit\n" - -# access/common/indextuple.c:57 -#: access/common/indextuple.c:57 -#, c-format -msgid "number of index columns (%d) exceeds limit (%d)" -msgstr "索引欄位數(%d)超過限制(%d)" - -# access/common/indextuple.c:165 -#: access/common/indextuple.c:165 -#, c-format -msgid "index row requires %lu bytes, maximum size is %lu" -msgstr "索引資料行需要 %lu 個位元組，最大值是 %lu" - -# access/common/heaptuple.c:580 -#: access/common/heaptuple.c:580 -#, c-format -msgid "number of columns (%d) exceeds limit (%d)" -msgstr "欄位數(%d)超過限制(%d)" - -# access/common/printtup.c:296 tcop/fastpath.c:186 tcop/fastpath.c:511 -# tcop/postgres.c:1480 -#: access/common/printtup.c:296 tcop/fastpath.c:186 tcop/fastpath.c:511 -#: tcop/postgres.c:1490 -#, c-format -msgid "unsupported format code: %d" -msgstr "不被支援的格式代碼：%d" - -# access/common/tupdesc.c:511 -#: access/common/tupdesc.c:511 -#, c-format -msgid "column \"%s\" cannot be declared SETOF" -msgstr "無法將欄位\"%s\"宣告為SETOF" - -# access/common/tupdesc.c:630 access/common/tupdesc.c:661 -#: access/common/tupdesc.c:630 access/common/tupdesc.c:661 -msgid "number of aliases does not match number of columns" -msgstr "別名數量與欄位數量不符" - -# access/common/tupdesc.c:655 -#: access/common/tupdesc.c:655 -msgid "no column alias was provided" -msgstr "沒有指定欄位別名" - -# access/common/tupdesc.c:679 -#: access/common/tupdesc.c:679 -msgid "could not determine row description for function returning record" -msgstr "" - -# access/hash/hashinsert.c:90 -#: access/hash/hashinsert.c:90 -#, c-format -msgid "index row size %lu exceeds hash maximum %lu" -msgstr "索引資料行大小 %lu 超過hash最大值 %lu" - -# access/hash/hashsearch.c:146 -#: access/hash/hashsearch.c:146 -msgid "hash indexes do not support whole-index scans" -msgstr "hash索引不支援完整索引掃描" - -# access/hash/hashovfl.c:522 -#: access/hash/hashovfl.c:522 -#, c-format -msgid "out of overflow pages in hash index \"%s\"" -msgstr "hash索引\"%s\"的overflow頁用盡" - -# access/hash/hashutil.c:46 -#: access/hash/hashutil.c:46 -msgid "hash indexes cannot contain null keys" -msgstr "hash索引不含包含空鍵值" - -# access/hash/hashutil.c:127 -#: access/hash/hashutil.c:127 -#, c-format -msgid "index \"%s\" is not a hash index" -msgstr "索引\"%s\"不是一個hash索引" - -# access/hash/hashutil.c:133 -#: access/hash/hashutil.c:133 -#, c-format -msgid "index \"%s\" has wrong hash version" -msgstr "索引\"%s\"的hash版本不正確" - -# access/hash/hashutil.c:134 -#: access/hash/hashutil.c:134 -msgid "Please REINDEX it." -msgstr "請執行REINDEX。" - -# access/heap/heapam.c:495 -#: access/heap/heapam.c:487 -#, c-format -msgid "could not obtain lock on relation \"%s\"" -msgstr "無法取得relation \"%s\"的鎖定" - -# access/heap/heapam.c:618 access/heap/heapam.c:653 access/heap/heapam.c:688 -# catalog/aclchk.c:286 -#: access/heap/heapam.c:610 access/heap/heapam.c:645 access/heap/heapam.c:680 -#: catalog/aclchk.c:286 -#, c-format -msgid "\"%s\" is an index" -msgstr "\"%s\"是一個索引" - -# access/heap/heapam.c:623 access/heap/heapam.c:658 access/heap/heapam.c:693 -#: access/heap/heapam.c:615 access/heap/heapam.c:650 access/heap/heapam.c:685 -#, c-format -msgid "\"%s\" is a special relation" -msgstr "\"%s\"是一個特別relation" - -# access/heap/heapam.c:628 access/heap/heapam.c:663 access/heap/heapam.c:698 -# catalog/aclchk.c:293 -#: access/heap/heapam.c:620 access/heap/heapam.c:655 access/heap/heapam.c:690 -#: catalog/aclchk.c:293 -#, c-format -msgid "\"%s\" is a composite type" -msgstr "\"%s\"是一個複合資料型別" - -# access/heap/hio.c:109 -#: access/heap/hio.c:109 -#, c-format -msgid "row is too big: size %lu, maximum size %lu" -msgstr "資料行太大：大小 %lu，最大值 %lu" - -# access/index/indexam.c:139 access/index/indexam.c:164 -# access/index/indexam.c:189 commands/comment.c:327 commands/indexcmds.c:873 -# commands/indexcmds.c:903 tcop/utility.c:93 -#: access/index/indexam.c:139 access/index/indexam.c:164 -#: access/index/indexam.c:189 commands/comment.c:327 commands/indexcmds.c:887 -#: commands/indexcmds.c:917 tcop/utility.c:93 -#, c-format -msgid "\"%s\" is not an index" -msgstr "\"%s\"不是一個索引" - -# access/nbtree/nbtinsert.c:254 -#: access/nbtree/nbtinsert.c:254 -#, c-format -msgid "duplicate key violates unique constraint \"%s\"" -msgstr "重複的鍵值違反唯一限制\"%s\"" - -# access/nbtree/nbtinsert.c:404 access/nbtree/nbtsort.c:499 -#: access/nbtree/nbtinsert.c:398 access/nbtree/nbtsort.c:499 -#, c-format -msgid "index row size %lu exceeds btree maximum, %lu" -msgstr "索引資料行大小 %lu 超過btree最大值 %lu" - -# access/nbtree/nbtpage.c:169 access/nbtree/nbtpage.c:350 -#: access/nbtree/nbtpage.c:169 access/nbtree/nbtpage.c:350 -#, c-format -msgid "index \"%s\" is not a btree" -msgstr "索引\"%s\"不是btree" - -# access/nbtree/nbtpage.c:175 access/nbtree/nbtpage.c:356 -#: access/nbtree/nbtpage.c:175 access/nbtree/nbtpage.c:356 -#, c-format -msgid "version mismatch in index \"%s\": file version %d, code version %d" -msgstr "在索引\"%s\"發現版本不符：檔案版本 %d，code版本 %d" - -# access/rtree/rtree.c:646 -#: access/rtree/rtree.c:646 -msgid "variable-length rtree keys are not supported" -msgstr "不支援可變長度rtree keys" - -# access/rtree/rtree.c:786 -#: access/rtree/rtree.c:786 -#, c-format -msgid "index row size %lu exceeds rtree maximum, %lu" -msgstr "索引資料行大小 %lu 超過rtree最大值 %lu" - -# access/transam/xlog.c:906 -#: access/transam/xlog.c:907 -#, c-format -msgid "could not create archive status file \"%s\": %m" -msgstr "無法建立備份狀態檔\"%s\"：%m" - -# access/transam/xlog.c:914 -#: access/transam/xlog.c:915 -#, c-format -msgid "could not write archive status file \"%s\": %m" -msgstr "無法寫入備份狀態檔\"%s\"：%m" - -# access/transam/xlog.c:1179 access/transam/xlog.c:1303 -# access/transam/xlog.c:5168 -#: access/transam/xlog.c:1180 access/transam/xlog.c:1304 -#: access/transam/xlog.c:5192 -#, c-format -msgid "could not close log file %u, segment %u: %m" -msgstr "無法關閉日誌檔 %u，區段 %u：%m" - -# access/transam/xlog.c:1237 access/transam/xlog.c:2405 -#: access/transam/xlog.c:1238 access/transam/xlog.c:2416 -#, c-format -msgid "could not seek in log file %u, segment %u to offset %u: %m" -msgstr "無法在日誌檔 %u 中移動，區段 %u 至偏移位置 %u：%m" - -# access/transam/xlog.c:1251 -#: access/transam/xlog.c:1252 -#, c-format -msgid "could not write to log file %u, segment %u at offset %u: %m" -msgstr "無法寫入日誌檔 %u，區段 %u 於偏移位置 %u：%m" - -# access/transam/xlog.c:1503 access/transam/xlog.c:1594 -# access/transam/xlog.c:1807 access/transam/xlog.c:1861 -# access/transam/xlog.c:1870 -#: access/transam/xlog.c:1504 access/transam/xlog.c:1595 -#: access/transam/xlog.c:1808 access/transam/xlog.c:1862 -#: access/transam/xlog.c:1871 -#, c-format -msgid "could not open file \"%s\" (log file %u, segment %u): %m" -msgstr "無法開啟檔案\"%s\"(日誌檔 %u，區段 %u)：%m" - -# access/transam/slru.c:645 access/transam/xlog.c:1526 -# access/transam/xlog.c:1646 access/transam/xlog.c:2911 -# access/transam/xlog.c:5308 access/transam/xlog.c:5426 -# postmaster/postmaster.c:3366 -#: access/transam/slru.c:645 access/transam/xlog.c:1527 -#: access/transam/xlog.c:1647 access/transam/xlog.c:2922 -#: access/transam/xlog.c:5340 access/transam/xlog.c:5458 -#: postmaster/postmaster.c:2907 -#, c-format -msgid "could not create file \"%s\": %m" -msgstr "無法建立檔案\"%s\"：%m" - -# access/transam/xlog.c:1555 access/transam/xlog.c:1679 -# access/transam/xlog.c:2964 access/transam/xlog.c:3002 commands/copy.c:1117 -# commands/tablespace.c:668 commands/tablespace.c:674 -# postmaster/postmaster.c:3430 utils/init/miscinit.c:832 -# utils/init/miscinit.c:841 utils/misc/guc.c:4934 utils/misc/guc.c:4998 -#: access/transam/xlog.c:1556 access/transam/xlog.c:1680 -#: access/transam/xlog.c:2975 access/transam/xlog.c:3013 commands/copy.c:1117 -#: commands/tablespace.c:664 commands/tablespace.c:670 -#: postmaster/postmaster.c:2917 postmaster/postmaster.c:2927 -#: utils/init/miscinit.c:832 utils/init/miscinit.c:841 utils/misc/guc.c:4798 -#: utils/misc/guc.c:4862 -#, c-format -msgid "could not write to file \"%s\": %m" -msgstr "無法寫入檔案\"%s\"：%m" - -# access/transam/slru.c:673 access/transam/xlog.c:1562 -# access/transam/xlog.c:1686 access/transam/xlog.c:3008 -#: access/transam/slru.c:673 access/transam/xlog.c:1563 -#: access/transam/xlog.c:1687 access/transam/xlog.c:3019 -#, c-format -msgid "could not fsync file \"%s\": %m" -msgstr "無法fsync檔案 \"%s\"：%m" - -# access/transam/slru.c:680 access/transam/xlog.c:1567 -# access/transam/xlog.c:1691 access/transam/xlog.c:3013 -#: access/transam/slru.c:680 access/transam/xlog.c:1568 -#: access/transam/xlog.c:1692 access/transam/xlog.c:3024 -#, c-format -msgid "could not close file \"%s\": %m" -msgstr "無法關閉檔案\"%s\"：%m" - -# access/transam/slru.c:638 access/transam/xlog.c:1631 -# access/transam/xlog.c:2742 access/transam/xlog.c:2832 -# access/transam/xlog.c:2930 libpq/hba.c:911 libpq/hba.c:935 -# utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 -# utils/misc/database.c:68 -#: access/transam/slru.c:638 access/transam/xlog.c:1632 -#: access/transam/xlog.c:2753 access/transam/xlog.c:2843 -#: access/transam/xlog.c:2941 libpq/hba.c:912 libpq/hba.c:936 -#: utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 -#: utils/misc/database.c:68 -#, c-format -msgid "could not open file \"%s\": %m" -msgstr "無法開啟檔案\"%s\"：%m" - -# access/transam/xlog.c:1659 access/transam/xlog.c:2942 -# access/transam/xlog.c:5397 access/transam/xlog.c:5448 -# access/transam/xlog.c:5520 access/transam/xlog.c:5545 -# access/transam/xlog.c:5583 -#: access/transam/xlog.c:1660 access/transam/xlog.c:2953 -#: access/transam/xlog.c:5429 access/transam/xlog.c:5480 -#: access/transam/xlog.c:5552 access/transam/xlog.c:5577 -#: access/transam/xlog.c:5615 -#, c-format -msgid "could not read file \"%s\": %m" -msgstr "無法讀取檔案\"%s\"：%m" - -# access/transam/xlog.c:1662 -#: access/transam/xlog.c:1663 -#, c-format -msgid "not enough data in file \"%s\"" -msgstr "檔案\"%s\"內的資料不足" - -# access/transam/xlog.c:1774 -#: access/transam/xlog.c:1775 -#, c-format -msgid "" -"could not link file \"%s\" to \"%s\" (initialization of log file %u, segment " -"%u): %m" -msgstr "" - -# access/transam/xlog.c:1781 -#: access/transam/xlog.c:1782 -#, c-format -msgid "" -"could not rename file \"%s\" to \"%s\" (initialization of log file %u, " -"segment %u): %m" -msgstr "無法將檔案\"%s\"重新命名為\"%s\"(初始化記錄檔%u，區段 %u)：%m" - -# access/transam/xlog.c:1936 access/transam/xlog.c:2038 -# access/transam/xlog.c:5291 -#: access/transam/xlog.c:1937 access/transam/xlog.c:2039 -#: access/transam/xlog.c:5323 -#, c-format -msgid "could not stat file \"%s\": %m" -msgstr "無法取得檔案狀態\"%s\"：%m" - -# access/transam/xlog.c:1944 access/transam/xlog.c:5453 -# access/transam/xlog.c:5607 postmaster/postmaster.c:3504 -#: access/transam/xlog.c:1945 access/transam/xlog.c:5485 -#: access/transam/xlog.c:5639 commands/tablespace.c:589 -#, c-format -msgid "could not remove file \"%s\": %m" -msgstr "無法刪除檔案\"%s\"：%m" - -# access/transam/xlog.c:2019 -#: access/transam/xlog.c:2020 -#, c-format -msgid "archive file \"%s\" has wrong size: %lu instead of %lu" -msgstr "備份檔\"%s\"大小不正確：%lu 而非 %lu" - -# access/transam/xlog.c:2026 -#: access/transam/xlog.c:2027 -#, c-format -msgid "restored log file \"%s\" from archive" -msgstr "從備份還原日誌檔\"%s\"" - -# access/transam/xlog.c:2051 -#: access/transam/xlog.c:2052 -#, c-format -msgid "could not restore file \"%s\" from archive: return code %d" -msgstr "無法從備份還原檔案\"%s\"：傳回碼 %d" - -# access/transam/xlog.c:2111 -#: access/transam/xlog.c:2120 -#, c-format -msgid "could not open transaction log directory \"%s\": %m" -msgstr "無法開啟交易日誌目錄\"%s\"：%m" - -# access/transam/xlog.c:2156 -#: access/transam/xlog.c:2165 -#, c-format -msgid "recycled transaction log file \"%s\"" -msgstr "" - -# access/transam/xlog.c:2163 -#: access/transam/xlog.c:2173 -#, c-format -msgid "removing transaction log file \"%s\"" -msgstr "刪除交易日誌檔\"%s\"" - -# access/transam/xlog.c:2185 -#: access/transam/xlog.c:2196 -#, c-format -msgid "could not read transaction log directory \"%s\": %m" -msgstr "無法讀取交易記錄目錄 \"%s\": %m" - -# access/transam/xlog.c:2269 -#: access/transam/xlog.c:2280 -#, c-format -msgid "incorrect resource manager data checksum in record at %X/%X" -msgstr "" - -# access/transam/xlog.c:2292 -#: access/transam/xlog.c:2303 -#, c-format -msgid "incorrect checksum of backup block %d in record at %X/%X" -msgstr "" - -# access/transam/xlog.c:2365 access/transam/xlog.c:2435 -#: access/transam/xlog.c:2376 access/transam/xlog.c:2446 -#, c-format -msgid "invalid record offset at %X/%X" -msgstr "無效的記錄偏移位置於 %X/%X" - -# access/transam/xlog.c:2413 -#: access/transam/xlog.c:2424 -#, c-format -msgid "could not read from log file %u, segment %u at offset %u: %m" -msgstr "無法讀取日誌檔 %u，區段 %u 於偏移位置 %u：%m" - -# access/transam/xlog.c:2443 -#: access/transam/xlog.c:2454 -#, c-format -msgid "contrecord is requested by %X/%X" -msgstr "" - -# access/transam/xlog.c:2458 -#: access/transam/xlog.c:2469 -#, c-format -msgid "record with zero length at %X/%X" -msgstr "記錄長度為0於 %X/%X" - -# access/transam/xlog.c:2465 -#: access/transam/xlog.c:2476 -#, c-format -msgid "invalid resource manager ID %u at %X/%X" -msgstr "無效的資源管理器 ID %u 於 %X/%X" - -# access/transam/xlog.c:2503 -#: access/transam/xlog.c:2514 -#, c-format -msgid "record length %u at %X/%X too long" -msgstr "記錄長度 %u 於 %X/%X 太長" - -# access/transam/xlog.c:2539 -#: access/transam/xlog.c:2550 -#, c-format -msgid "could not read from log file %u, segment %u, offset %u: %m" -msgstr "無法讀取日誌檔 %u，區段 %u，偏移位置 %u：%m" - -# access/transam/xlog.c:2548 -#: access/transam/xlog.c:2559 -#, c-format -msgid "there is no contrecord flag in log file %u, segment %u, offset %u" -msgstr "" - -# access/transam/xlog.c:2558 -#: access/transam/xlog.c:2569 -#, c-format -msgid "invalid contrecord length %u in log file %u, segment %u, offset %u" -msgstr "" - -# access/transam/xlog.c:2625 -#: access/transam/xlog.c:2636 -#, c-format -msgid "invalid magic number %04X in log file %u, segment %u, offset %u" -msgstr "" - -# access/transam/xlog.c:2632 -#: access/transam/xlog.c:2643 -#, c-format -msgid "invalid info bits %04X in log file %u, segment %u, offset %u" -msgstr "" - -# access/transam/xlog.c:2654 access/transam/xlog.c:2662 -#: access/transam/xlog.c:2665 access/transam/xlog.c:2673 -msgid "WAL file is from different system" -msgstr "WAL 檔是來自不同系統" - -# access/transam/xlog.c:2655 -#: access/transam/xlog.c:2666 -#, c-format -msgid "WAL file SYSID is %s, pg_control SYSID is %s" -msgstr "WAL 檔 SYSID 為 %s，pg_control SYSID 為 %s" - -# access/transam/xlog.c:2663 -#: access/transam/xlog.c:2674 -msgid "Incorrect XLOG_SEG_SIZE in page header." -msgstr "page header中的XLOG_SEG_SIZE不正確" - -# access/transam/xlog.c:2672 -#: access/transam/xlog.c:2683 -#, c-format -msgid "unexpected pageaddr %X/%X in log file %u, segment %u, offset %u" -msgstr "非預期的pageaddr %X/%X於日誌檔 %u，區段 %u，偏移位置 %u" - -# access/transam/xlog.c:2684 -#: access/transam/xlog.c:2695 -#, c-format -msgid "unexpected timeline ID %u in log file %u, segment %u, offset %u" -msgstr "非預期的timeline ID %u於日誌檔 %u，區段 %u，偏移位置 %u" - -# access/transam/xlog.c:2702 -#: access/transam/xlog.c:2713 -#, c-format -msgid "" -"out-of-sequence timeline ID %u (after %u) in log file %u, segment %u, offset " -"%u" -msgstr "" - -# access/transam/xlog.c:2771 -#: access/transam/xlog.c:2782 -#, c-format -msgid "syntax error in history file: %s" -msgstr "歷史記錄檔中有語法錯誤：%s" - -# access/transam/xlog.c:2772 -#: access/transam/xlog.c:2783 -msgid "Expected a numeric timeline ID." -msgstr "預期一個數字timeline ID。" - -# access/transam/xlog.c:2777 -#: access/transam/xlog.c:2788 -#, c-format -msgid "invalid data in history file: %s" -msgstr "歷史記錄檔中有無效資料：%s" - -# access/transam/xlog.c:2778 -#: access/transam/xlog.c:2789 -msgid "Timeline IDs must be in increasing sequence." -msgstr "" - -# access/transam/xlog.c:2791 -#: access/transam/xlog.c:2802 -#, c-format -msgid "invalid data in history file \"%s\"" -msgstr "歷史記錄檔\"%s\"中有無效資料" - -# access/transam/xlog.c:2792 -#: access/transam/xlog.c:2803 -msgid "Timeline IDs must be less than child timeline's ID." -msgstr "" - -# access/transam/xlog.c:3030 -#: access/transam/xlog.c:3041 -#, c-format -msgid "could not link file \"%s\" to \"%s\": %m" -msgstr "無法將檔案\"%s\"連結到\"%s\"：%m" - -# access/transam/xlog.c:3037 access/transam/xlog.c:3819 -# access/transam/xlog.c:3862 commands/user.c:282 commands/user.c:412 -# postmaster/pgarch.c:597 -#: access/transam/xlog.c:3048 access/transam/xlog.c:3830 -#: access/transam/xlog.c:3873 commands/user.c:282 commands/user.c:412 -#: postmaster/pgarch.c:596 -#, c-format -msgid "could not rename file \"%s\" to \"%s\": %m" -msgstr "無法將檔案\"%s\"重新命名為\"%s\"：%m" - -# access/transam/xlog.c:3098 -#: access/transam/xlog.c:3109 -msgid "invalid LC_COLLATE setting" -msgstr "不合法的LC_COLLATE設定" - -# access/transam/xlog.c:3103 -#: access/transam/xlog.c:3114 -msgid "invalid LC_CTYPE setting" -msgstr "不合法的LC_CTYPE設定" - -# access/transam/xlog.c:3122 -#: access/transam/xlog.c:3133 -msgid "sizeof(ControlFileData) is larger than BLCKSZ; fix either one" -msgstr "sizeof(ControlFileData) 大於 BLCKSZ; 修正其中一項" - -# access/transam/xlog.c:3132 -#: access/transam/xlog.c:3143 -#, c-format -msgid "could not create control file \"%s\": %m" -msgstr "無法建立控制檔\"%s\"：%m" - -# access/transam/xlog.c:3143 access/transam/xlog.c:3330 -#: access/transam/xlog.c:3154 access/transam/xlog.c:3341 -#, c-format -msgid "could not write to control file: %m" -msgstr "無法寫入控制檔：%m" - -# access/transam/xlog.c:3149 access/transam/xlog.c:3336 -#: access/transam/xlog.c:3160 access/transam/xlog.c:3347 -#, c-format -msgid "could not fsync control file: %m" -msgstr "無法fsync控制檔：%m" - -# access/transam/xlog.c:3154 access/transam/xlog.c:3341 -#: access/transam/xlog.c:3165 access/transam/xlog.c:3352 -#, c-format -msgid "could not close control file: %m" -msgstr "無法關閉控制檔：%m" - -# access/transam/xlog.c:3170 access/transam/xlog.c:3319 -#: access/transam/xlog.c:3181 access/transam/xlog.c:3330 -#, c-format -msgid "could not open control file \"%s\": %m" -msgstr "無法開啟控制檔\"%s\"：%m" - -# access/transam/xlog.c:3176 -#: access/transam/xlog.c:3187 -#, c-format -msgid "could not read from control file: %m" -msgstr "無法讀取控制檔：%m" - -# access/transam/xlog.c:3188 access/transam/xlog.c:3218 -# access/transam/xlog.c:3225 access/transam/xlog.c:3232 -# access/transam/xlog.c:3239 access/transam/xlog.c:3246 -# access/transam/xlog.c:3253 access/transam/xlog.c:3262 -# access/transam/xlog.c:3269 access/transam/xlog.c:3277 -# utils/init/miscinit.c:907 -#: access/transam/xlog.c:3199 access/transam/xlog.c:3229 -#: access/transam/xlog.c:3236 access/transam/xlog.c:3243 -#: access/transam/xlog.c:3250 access/transam/xlog.c:3257 -#: access/transam/xlog.c:3264 access/transam/xlog.c:3273 -#: access/transam/xlog.c:3280 access/transam/xlog.c:3288 -#: utils/init/miscinit.c:907 -msgid "database files are incompatible with server" -msgstr "資料庫檔案與伺服器不相容" - -# access/transam/xlog.c:3189 -#: access/transam/xlog.c:3200 -#, c-format -msgid "" -"The database cluster was initialized with PG_CONTROL_VERSION %d, but the " -"server was compiled with PG_CONTROL_VERSION %d." -msgstr "資料庫 cluster 已以 PG_CONTROL_VERSION %d 初始化，但伺服器是以 PG_CONTROL_VERSION %d 編譯。" - -# access/transam/xlog.c:3192 access/transam/xlog.c:3222 -#: access/transam/xlog.c:3203 access/transam/xlog.c:3233 -msgid "It looks like you need to initdb." -msgstr "你可能需要執行initdb。" - -# access/transam/xlog.c:3202 -#: access/transam/xlog.c:3213 -msgid "incorrect checksum in control file" -msgstr "控制檔的checksum不正確" - -# access/transam/xlog.c:3219 -#: access/transam/xlog.c:3230 -#, c-format -msgid "" -"The database cluster was initialized with CATALOG_VERSION_NO %d, but the " -"server was compiled with CATALOG_VERSION_NO %d." -msgstr "資料庫 cluster 已以 CATALOG_VERSION_NO %d 初始化，但伺服器是以 CATALOG_VERSION_NO %d 編譯。" - -# access/transam/xlog.c:3226 -#: access/transam/xlog.c:3237 -#, c-format -msgid "" -"The database cluster was initialized with BLCKSZ %d, but the server was " -"compiled with BLCKSZ %d." -msgstr "資料庫 cluster 已以 BLCKSZ %d 初始化，但伺服器是以 BLCKSZ %d 編譯。" - -# access/transam/xlog.c:3229 access/transam/xlog.c:3236 -# access/transam/xlog.c:3243 access/transam/xlog.c:3250 -# access/transam/xlog.c:3257 access/transam/xlog.c:3265 -# access/transam/xlog.c:3272 access/transam/xlog.c:3281 -#: access/transam/xlog.c:3240 access/transam/xlog.c:3247 -#: access/transam/xlog.c:3254 access/transam/xlog.c:3261 -#: access/transam/xlog.c:3268 access/transam/xlog.c:3276 -#: access/transam/xlog.c:3283 access/transam/xlog.c:3292 -msgid "It looks like you need to recompile or initdb." -msgstr "你可能需要重新編譯initdb。" - -# access/transam/xlog.c:3233 -#: access/transam/xlog.c:3244 -#, c-format -msgid "" -"The database cluster was initialized with RELSEG_SIZE %d, but the server was " -"compiled with RELSEG_SIZE %d." -msgstr "資料庫 cluster 已以 RELSEG_SIZE %d 初始化，但伺服器是以 RELSEG_SIZE %d 編譯。" - -# access/transam/xlog.c:3240 -#: access/transam/xlog.c:3251 -#, c-format -msgid "" -"The database cluster was initialized with XLOG_SEG_SIZE %d, but the server " -"was compiled with XLOG_SEG_SIZE %d." -msgstr "資料庫 cluster 已以 XLOG_SEG_SIZE %d 初始化，但伺服器是以 XLOG_SEG_SIZE %d 編譯。" - -# access/transam/xlog.c:3247 -#: access/transam/xlog.c:3258 -#, c-format -msgid "" -"The database cluster was initialized with NAMEDATALEN %d, but the server was " -"compiled with NAMEDATALEN %d." -msgstr "資料庫 cluster 已以 NAMEDATALEN %d 初始化，但伺服器是以 NAMEDATALEN %d 編譯。" - -# access/transam/xlog.c:3254 -#: access/transam/xlog.c:3265 -#, c-format -msgid "" -"The database cluster was initialized with FUNC_MAX_ARGS %d, but the server " -"was compiled with FUNC_MAX_ARGS %d." -msgstr "資料庫 cluster 已以 FUNC_MAX_ARGS %d 初始化，但伺服器是以 FUNC_MAX_ARGS %d 編譯。" - -# access/transam/xlog.c:3263 -#: access/transam/xlog.c:3274 -msgid "" -"The database cluster was initialized without HAVE_INT64_TIMESTAMP but the " -"server was compiled with HAVE_INT64_TIMESTAMP." -msgstr "資料庫 cluster 已以非 HAVE_INT64_TIMESTAMP 初始化，但伺服器是以 HAVE_INT64_TIMESTAMP 編譯。" - -# access/transam/xlog.c:3270 -#: access/transam/xlog.c:3281 -msgid "" -"The database cluster was initialized with HAVE_INT64_TIMESTAMP but the " -"server was compiled without HAVE_INT64_TIMESTAMP." -msgstr "資料庫 cluster 已以 HAVE_INT64_TIMESTAMP 初始化，但伺服器是以非 HAVE_INT64_TIMESTAMP 編譯。" - -# access/transam/xlog.c:3278 -#: access/transam/xlog.c:3289 -#, c-format -msgid "" -"The database cluster was initialized with LOCALE_NAME_BUFLEN %d, but the " -"server was compiled with LOCALE_NAME_BUFLEN %d." -msgstr "資料庫 cluster 已以 LOCALE_NAME_BUFLEN %d 初始化，但伺服器是以 LOCALE_NAME_BUFLEN %d 編譯。" - -# access/transam/xlog.c:3284 access/transam/xlog.c:3291 -#: access/transam/xlog.c:3295 access/transam/xlog.c:3302 -msgid "database files are incompatible with operating system" -msgstr "資料庫檔案與作業系統不相容" - -# access/transam/xlog.c:3285 -#: access/transam/xlog.c:3296 -#, c-format -msgid "" -"The database cluster was initialized with LC_COLLATE \"%s\", which is not " -"recognized by setlocale()." -msgstr "資料庫 cluster 已以 LC_COLLATE \"%s\" 初始化，但 setlocale() 無法辨識該 LC_COLLATE。" - -# access/transam/xlog.c:3288 access/transam/xlog.c:3295 -#: access/transam/xlog.c:3299 access/transam/xlog.c:3306 -msgid "It looks like you need to initdb or install locale support." -msgstr "你可能需要執行initdb或安裝locale支援。" - -# access/transam/xlog.c:3292 -#: access/transam/xlog.c:3303 -#, c-format -msgid "" -"The database cluster was initialized with LC_CTYPE \"%s\", which is not " -"recognized by setlocale()." -msgstr "資料庫 cluster 已以 LC_CTYPE \"%s\" 初始化，但 setlocale() 無法辨識該 LC_CTYPE。" - -# access/transam/xlog.c:3518 -#: access/transam/xlog.c:3529 -#, c-format -msgid "could not write bootstrap transaction log file: %m" -msgstr "" - -# access/transam/xlog.c:3524 -#: access/transam/xlog.c:3535 -#, c-format -msgid "could not fsync bootstrap transaction log file: %m" -msgstr "" - -# access/transam/xlog.c:3529 -#: access/transam/xlog.c:3540 -#, c-format -msgid "could not close bootstrap transaction log file: %m" -msgstr "" - -# access/transam/xlog.c:3591 -#: access/transam/xlog.c:3602 -#, c-format -msgid "could not open recovery command file \"%s\": %m" -msgstr "無法開啟還原命令檔\"%s\"：%m" - -# access/transam/xlog.c:3596 -#: access/transam/xlog.c:3607 -msgid "starting archive recovery" -msgstr "開始備份檔還原" - -# access/transam/xlog.c:3641 -#: access/transam/xlog.c:3652 -#, c-format -msgid "restore_command = \"%s\"" -msgstr "" - -# access/transam/xlog.c:3655 -#: access/transam/xlog.c:3666 -#, c-format -msgid "recovery_target_timeline is not a valid number: \"%s\"" -msgstr "" - -# access/transam/xlog.c:3660 -#: access/transam/xlog.c:3671 -#, c-format -msgid "recovery_target_timeline = %u" -msgstr "" - -# access/transam/xlog.c:3663 -#: access/transam/xlog.c:3674 -msgid "recovery_target_timeline = latest" -msgstr "" - -# access/transam/xlog.c:3671 -#: access/transam/xlog.c:3682 -#, c-format -msgid "recovery_target_xid is not a valid number: \"%s\"" -msgstr "" - -# access/transam/xlog.c:3674 -#: access/transam/xlog.c:3685 -#, c-format -msgid "recovery_target_xid = %u" -msgstr "" - -# access/transam/xlog.c:3699 -#: access/transam/xlog.c:3710 -#, c-format -msgid "recovery_target_time = %s" -msgstr "" - -# access/transam/xlog.c:3716 -#: access/transam/xlog.c:3727 -#, c-format -msgid "recovery_target_inclusive = %s" -msgstr "" - -# access/transam/xlog.c:3720 -#: access/transam/xlog.c:3731 -#, c-format -msgid "unrecognized recovery parameter \"%s\"" -msgstr "無法識別的還原參數\"%s\"" - -# access/transam/xlog.c:3728 -#: access/transam/xlog.c:3739 -#, c-format -msgid "syntax error in recovery command file: %s" -msgstr "還原命令檔有語法錯誤：%s" - -# access/transam/xlog.c:3730 -#: access/transam/xlog.c:3741 -msgid "Lines should have the format parameter = 'value'." -msgstr "" - -# access/transam/xlog.c:3735 -#: access/transam/xlog.c:3746 -#, c-format -msgid "recovery command file \"%s\" did not specify restore_command" -msgstr "" - -# access/transam/xlog.c:3754 -#: access/transam/xlog.c:3765 -#, c-format -msgid "recovery_target_timeline %u does not exist" -msgstr "" - -# access/transam/xlog.c:3866 -#: access/transam/xlog.c:3877 -msgid "archive recovery complete" -msgstr "備份檔還原完成" - -# access/transam/xlog.c:3950 -#: access/transam/xlog.c:3961 -#, c-format -msgid "recovery stopping after commit of transaction %u, time %s" -msgstr "還原在確認交易 %u 後停止，時間 %s" - -# access/transam/xlog.c:3954 -#: access/transam/xlog.c:3965 -#, c-format -msgid "recovery stopping before commit of transaction %u, time %s" -msgstr "還原在確認交易 %u 前停止，時間 %s" - -# access/transam/xlog.c:3961 -#: access/transam/xlog.c:3972 -#, c-format -msgid "recovery stopping after abort of transaction %u, time %s" -msgstr "還原在取消交易 %u 後停止，時間 %s" - -# access/transam/xlog.c:3965 -#: access/transam/xlog.c:3976 -#, c-format -msgid "recovery stopping before abort of transaction %u, time %s" -msgstr "還原取消交易 %u 前停止，時間 %s" - -# access/transam/xlog.c:4007 -#: access/transam/xlog.c:4018 -msgid "control file contains invalid data" -msgstr "控制檔包含無效的資料" - -# access/transam/xlog.c:4011 -#: access/transam/xlog.c:4022 -#, c-format -msgid "database system was shut down at %s" -msgstr "資料庫系統於 %s 被關閉" - -# access/transam/xlog.c:4015 -#: access/transam/xlog.c:4026 -#, c-format -msgid "database system shutdown was interrupted at %s" -msgstr "關閉資料庫系統於 %s 被中斷" - -# access/transam/xlog.c:4019 -#: access/transam/xlog.c:4030 -#, c-format -msgid "database system was interrupted while in recovery at %s" -msgstr "資料庫系統還原於 %s 被中斷" - -# access/transam/xlog.c:4021 -#: access/transam/xlog.c:4032 -msgid "" -"This probably means that some data is corrupted and you will have to use the " -"last backup for recovery." -msgstr "這表示部份資料可能損壞，你需要使用最後的備份進行還原。" - -# access/transam/xlog.c:4025 -#: access/transam/xlog.c:4036 -#, c-format -msgid "database system was interrupted at %s" -msgstr "資料庫系統於 %s 被中斷" - -# access/transam/xlog.c:4057 -#: access/transam/xlog.c:4068 -#, c-format -msgid "requested timeline %u is not a child of database system timeline %u" -msgstr "" - -# access/transam/xlog.c:4072 access/transam/xlog.c:4094 -#: access/transam/xlog.c:4083 access/transam/xlog.c:4105 -#, c-format -msgid "checkpoint record is at %X/%X" -msgstr "檢查點記錄於 %X/%X" - -# access/transam/xlog.c:4079 -#: access/transam/xlog.c:4090 -msgid "could not locate required checkpoint record" -msgstr "找不到要求的檢查點記錄" - -# access/transam/xlog.c:4080 -#: access/transam/xlog.c:4091 -#, c-format -msgid "" -"If you are not restoring from a backup, try removing the file \"%s/" -"backup_label\"." -msgstr "" - -# access/transam/xlog.c:4104 -#: access/transam/xlog.c:4115 -#, c-format -msgid "using previous checkpoint record at %X/%X" -msgstr "使用前一個檢查點記錄於 %X/%X" - -# access/transam/xlog.c:4111 -#: access/transam/xlog.c:4122 -msgid "could not locate a valid checkpoint record" -msgstr "找不到有效的檢查點記錄" - -# access/transam/xlog.c:4120 -#: access/transam/xlog.c:4131 -#, c-format -msgid "redo record is at %X/%X; undo record is at %X/%X; shutdown %s" -msgstr "redo記錄於 %X/%X，undo記錄於 %X/%X，關閉 %s" - -# access/transam/xlog.c:4125 -#: access/transam/xlog.c:4136 -#, c-format -msgid "next transaction ID: %u; next OID: %u" -msgstr "下一個交易ID：%u，下一個OID：%u" - -# access/transam/xlog.c:4129 -#: access/transam/xlog.c:4140 -msgid "invalid next transaction ID" -msgstr "不合法的下一個交易ID" - -# access/transam/xlog.c:4146 -#: access/transam/xlog.c:4157 -msgid "invalid redo in checkpoint record" -msgstr "檢查點記錄中有不合法的redo記茄" - -# access/transam/xlog.c:4160 -#: access/transam/xlog.c:4171 -msgid "invalid redo/undo record in shutdown checkpoint" -msgstr "關閉檢查點中有不合法的redo/undo記錄" - -# access/transam/xlog.c:4178 -#: access/transam/xlog.c:4189 -msgid "automatic recovery in progress" -msgstr "自動還原執行中" - -# access/transam/xlog.c:4181 -#: access/transam/xlog.c:4192 -msgid "" -"database system was not properly shut down; automatic recovery in progress" -msgstr "資料庫系統未被正常關閉，自動還原執行中" - -# access/transam/xlog.c:4218 -#: access/transam/xlog.c:4229 -#, c-format -msgid "redo starts at %X/%X" -msgstr "redo開始於 %X/%X" - -# access/transam/xlog.c:4276 -#: access/transam/xlog.c:4287 -#, c-format -msgid "redo done at %X/%X" -msgstr "redo完成於 %X/%X" - -# access/transam/xlog.c:4284 -#: access/transam/xlog.c:4295 -msgid "redo is not required" -msgstr "不需要redo" - -# access/transam/xlog.c:4304 -#: access/transam/xlog.c:4315 -msgid "requested recovery stop point is before end time of backup dump" -msgstr "" - -# access/transam/xlog.c:4308 -#: access/transam/xlog.c:4319 -msgid "WAL ends before end time of backup dump" -msgstr "" - -# access/transam/xlog.c:4323 -#: access/transam/xlog.c:4334 -#, c-format -msgid "selected new timeline ID: %u" -msgstr "" - -# access/transam/xlog.c:4405 -#: access/transam/xlog.c:4416 -#, c-format -msgid "undo starts at %X/%X" -msgstr "undo開始於 %X/%X" - -# access/transam/xlog.c:4416 -#: access/transam/xlog.c:4427 -#, c-format -msgid "undo done at %X/%X" -msgstr "undo完成於 %X/%X" - -# access/transam/xlog.c:4421 -#: access/transam/xlog.c:4432 -msgid "undo is not required" -msgstr "不需要undo" - -# access/transam/xlog.c:4489 -#: access/transam/xlog.c:4500 -msgid "database system is ready" -msgstr "資料庫系統待命" - -# access/transam/xlog.c:4528 -#: access/transam/xlog.c:4539 -msgid "invalid primary checkpoint link in control file" -msgstr "控制檔中有無效的主要檢查點連結" - -# access/transam/xlog.c:4532 -#: access/transam/xlog.c:4543 -msgid "invalid secondary checkpoint link in control file" -msgstr "控制檔中有無效的次要檢查點連結" - -# access/transam/xlog.c:4536 -#: access/transam/xlog.c:4547 -msgid "invalid checkpoint link in backup_label file" -msgstr "backup_label檔案中有無效的檢查點連結" - -# access/transam/xlog.c:4550 -#: access/transam/xlog.c:4561 -msgid "invalid primary checkpoint record" -msgstr "無效的主檢查點記錄" - -# access/transam/xlog.c:4554 -#: access/transam/xlog.c:4565 -msgid "invalid secondary checkpoint record" -msgstr "無效的次要檢查點記錄" - -# access/transam/xlog.c:4558 -#: access/transam/xlog.c:4569 -msgid "invalid checkpoint record" -msgstr "無效的檢查點記錄" - -# access/transam/xlog.c:4569 -#: access/transam/xlog.c:4580 -msgid "invalid resource manager ID in primary checkpoint record" -msgstr "主要檢查點記錄中有無效的資源管理器ID" - -# access/transam/xlog.c:4573 -#: access/transam/xlog.c:4584 -msgid "invalid resource manager ID in secondary checkpoint record" -msgstr "次要檢查點記錄中有無效的資源管理器ID" - -# access/transam/xlog.c:4577 -#: access/transam/xlog.c:4588 -msgid "invalid resource manager ID in checkpoint record" -msgstr "檢查點記錄中有無效的資源管理器ID" - -# access/transam/xlog.c:4589 -#: access/transam/xlog.c:4600 -msgid "invalid xl_info in primary checkpoint record" -msgstr "主要檢查點記錄中有無效的xl_info" - -# access/transam/xlog.c:4593 -#: access/transam/xlog.c:4604 -msgid "invalid xl_info in secondary checkpoint record" -msgstr "次要檢查點記錄中有無效的xl_info" - -# access/transam/xlog.c:4597 -#: access/transam/xlog.c:4608 -msgid "invalid xl_info in checkpoint record" -msgstr "檢查點記錄中有無效的xl_info" - -# access/transam/xlog.c:4608 -#: access/transam/xlog.c:4619 -msgid "invalid length of primary checkpoint record" -msgstr "主要檢查點記錄的長度無效" - -# access/transam/xlog.c:4612 -#: access/transam/xlog.c:4623 -msgid "invalid length of secondary checkpoint record" -msgstr "次要檢查點記錄的長度無效" - -# access/transam/xlog.c:4616 -#: access/transam/xlog.c:4627 -msgid "invalid length of checkpoint record" -msgstr "無效的檢查點記錄長度" - -# access/transam/xlog.c:4669 -#: access/transam/xlog.c:4680 -msgid "shutting down" -msgstr "正在關閉" - -# access/transam/xlog.c:4678 -#: access/transam/xlog.c:4689 -msgid "database system is shut down" -msgstr "資料庫系統已關閉" - -# postmaster/bgwriter.c:555 -#: access/transam/xlog.c:4880 -msgid "checkpoint starting" -msgstr "開始檢查點" - -# access/transam/xlog.c:4891 -#: access/transam/xlog.c:4909 -msgid "" -"concurrent transaction log activity while database system is shutting down" -msgstr "" - -#: access/transam/xlog.c:4981 -#, c-format -msgid "" -"checkpoint complete; %d transaction log file(s) added, %d removed, %d " -"recycled" -msgstr "" - -# access/transam/xlog.c:5017 -#: access/transam/xlog.c:5041 -#, c-format -msgid "unexpected timeline ID %u (after %u) in checkpoint record" -msgstr "" - -# access/transam/xlog.c:5040 -#: access/transam/xlog.c:5064 -#, c-format -msgid "unexpected timeline ID %u (should be %u) in checkpoint record" -msgstr "" - -# access/transam/xlog.c:5161 access/transam/xlog.c:5193 -#: access/transam/xlog.c:5185 access/transam/xlog.c:5217 -#, c-format -msgid "could not fsync log file %u, segment %u: %m" -msgstr "無法fsync日誌檔 %u，區段 %u：%m" - -# access/transam/xlog.c:5201 -#: access/transam/xlog.c:5225 -#, c-format -msgid "could not fdatasync log file %u, segment %u: %m" -msgstr "無法fdatasync日誌檔 %u，區段 %u：%m" - -# access/transam/xlog.c:5244 access/transam/xlog.c:5363 -#: access/transam/xlog.c:5268 access/transam/xlog.c:5395 -msgid "must be superuser to run a backup" -msgstr "只有管理者能執行備份" - -# utils/misc/guc.c:1423 -#: access/transam/xlog.c:5273 -msgid "WAL archiving is not active" -msgstr "WAL備份並未開啟" - -#: access/transam/xlog.c:5274 -msgid "" -"archive_command must be defined before online backups can be made safely." -msgstr "" - -# access/transam/xlog.c:5297 -#: access/transam/xlog.c:5329 -msgid "a backup is already in progress" -msgstr "已有備份動作正在進行" - -# access/transam/xlog.c:5298 -#: access/transam/xlog.c:5330 -#, c-format -msgid "" -"If you're sure there is no backup in progress, remove file \"%s\" and try " -"again." -msgstr "如果您確定沒有備份動作正在進行，移除檔案 \"%s\" 並重試。" - -# access/transam/xlog.c:5319 access/transam/xlog.c:5439 -#: access/transam/xlog.c:5351 access/transam/xlog.c:5471 -#, c-format -msgid "could not write file \"%s\": %m" -msgstr "無法寫入檔案 \"%s\": %m" - -# access/transam/xlog.c:5401 -#: access/transam/xlog.c:5433 -msgid "a backup is not in progress" -msgstr "有一個備份動作不在運行" - -# access/transam/xlog.c:5414 access/transam/xlog.c:5535 -# access/transam/xlog.c:5541 access/transam/xlog.c:5572 -# access/transam/xlog.c:5578 -#: access/transam/xlog.c:5446 access/transam/xlog.c:5567 -#: access/transam/xlog.c:5573 access/transam/xlog.c:5604 -#: access/transam/xlog.c:5610 -#, c-format -msgid "invalid data in file \"%s\"" -msgstr "歷史記錄檔 \"%s\" 中有無效資料" - -# access/transam/slru.c:452 -#: access/transam/slru.c:452 -#, c-format -msgid "file \"%s\" doesn't exist, reading as zeroes" -msgstr "檔案\"%s\"不存在，當成空檔案讀取" - -# access/transam/slru.c:637 access/transam/slru.c:644 -# access/transam/slru.c:651 access/transam/slru.c:658 -# access/transam/slru.c:665 access/transam/slru.c:672 -# access/transam/slru.c:679 -#: access/transam/slru.c:637 access/transam/slru.c:644 -#: access/transam/slru.c:651 access/transam/slru.c:658 -#: access/transam/slru.c:665 access/transam/slru.c:672 -#: access/transam/slru.c:679 -#, c-format -msgid "could not access status of transaction %u" -msgstr "無法存取交易 %u 的狀態" - -# access/transam/slru.c:652 -#: access/transam/slru.c:652 -#, c-format -msgid "could not seek in file \"%s\" to offset %u: %m" -msgstr "無法移動至檔案\"%s\"的偏移位置 %u：%m" - -# access/transam/slru.c:659 -#: access/transam/slru.c:659 -#, c-format -msgid "could not read from file \"%s\" at offset %u: %m" -msgstr "無法讀取檔案\"%s\"於偏移位置 %u：%m" - -# access/transam/slru.c:666 -#: access/transam/slru.c:666 -#, c-format -msgid "could not write to file \"%s\" at offset %u: %m" -msgstr "無法寫入檔案\"%s\"於偏移位置 %u：%m" - -# access/transam/slru.c:862 -#: access/transam/slru.c:862 -#, c-format -msgid "could not truncate directory \"%s\": apparent wraparound" -msgstr "" - -# access/transam/slru.c:930 commands/tablespace.c:529 -# commands/tablespace.c:694 utils/adt/misc.c:174 -#: ../port/copydir.c:55 access/transam/slru.c:930 commands/tablespace.c:525 -#: commands/tablespace.c:692 utils/adt/misc.c:174 -#, c-format -msgid "could not open directory \"%s\": %m" -msgstr "無法開啟目錄\"%s\"：%m" - -# access/transam/slru.c:948 -#: access/transam/slru.c:948 -#, c-format -msgid "removing file \"%s\"" -msgstr "刪除檔案\"%s\"" - -# access/transam/slru.c:967 commands/tablespace.c:577 -# commands/tablespace.c:721 -#: access/transam/slru.c:967 commands/tablespace.c:573 -#: commands/tablespace.c:719 -#, c-format -msgid "could not read directory \"%s\": %m" -msgstr "無法讀取目錄\"%s\"：%m" - -# access/transam/xact.c:510 -#: access/transam/xact.c:510 -msgid "cannot have more than 2^32-1 commands in a transaction" -msgstr "每筆交易不能超過2^32-1個命令" - -# translator: %s represents an SQL statement name -# access/transam/xact.c:2173 -#. translator: %s represents an SQL statement name -#: access/transam/xact.c:2178 -#, c-format -msgid "%s cannot run inside a transaction block" -msgstr "%s 不能在交易中執行" - -# translator: %s represents an SQL statement name -# access/transam/xact.c:2183 -#. translator: %s represents an SQL statement name -#: access/transam/xact.c:2188 -#, c-format -msgid "%s cannot run inside a subtransaction" -msgstr "%s 不能在子交易中執行" - -# translator: %s represents an SQL statement name -# access/transam/xact.c:2195 -#. translator: %s represents an SQL statement name -#: access/transam/xact.c:2200 -#, c-format -msgid "%s cannot be executed from a function" -msgstr "%s 不能在函式中執行" - -# translator: %s represents an SQL statement name -# access/transam/xact.c:2246 -#. translator: %s represents an SQL statement name -#: access/transam/xact.c:2251 -#, c-format -msgid "%s may only be used in transaction blocks" -msgstr "%s 只能在交易中被使用" - -# access/transam/xact.c:2429 -#: access/transam/xact.c:2434 -msgid "there is already a transaction in progress" -msgstr "已經有交易在執行中" - -# access/transam/xact.c:2544 access/transam/xact.c:2635 -#: access/transam/xact.c:2549 access/transam/xact.c:2640 -msgid "there is no transaction in progress" -msgstr "沒有執行中的交易" - -# access/transam/xact.c:2727 access/transam/xact.c:2776 -# access/transam/xact.c:2782 access/transam/xact.c:2826 -# access/transam/xact.c:2873 access/transam/xact.c:2879 -#: access/transam/xact.c:2732 access/transam/xact.c:2781 -#: access/transam/xact.c:2787 access/transam/xact.c:2831 -#: access/transam/xact.c:2878 access/transam/xact.c:2884 -msgid "no such savepoint" -msgstr "沒有這個savepoint" - -# access/transam/xact.c:3517 -#: access/transam/xact.c:3522 -msgid "cannot have more than 2^32-1 subtransactions in a transaction" -msgstr "每筆交易不能擁有超過2^32-1個子交易" - -# bootstrap/bootstrap.c:299 postmaster/postmaster.c:495 tcop/postgres.c:2502 -#: bootstrap/bootstrap.c:299 postmaster/postmaster.c:549 tcop/postgres.c:2533 -#, c-format -msgid "--%s requires a value" -msgstr "--%s 需要一個值" - -# bootstrap/bootstrap.c:304 postmaster/postmaster.c:500 tcop/postgres.c:2507 -#: bootstrap/bootstrap.c:304 postmaster/postmaster.c:554 tcop/postgres.c:2538 -#, c-format -msgid "-c %s requires a value" -msgstr "-c %s 需要一個值" - -# bootstrap/bootstrap.c:481 -#: bootstrap/bootstrap.c:481 -msgid "" -"Usage:\n" -" postgres -boot [OPTION]... DBNAME\n" -" -c NAME=VALUE set run-time parameter\n" -" -d 1-5 debug level\n" -" -D datadir data directory\n" -" -F turn off fsync\n" -" -o file send debug output to file\n" -" -x num internal use\n" -msgstr "" -"使用方法：\n" -" postgres -boot [OPTION]... DBNAME\n" -" -c NAME=VALUE 設定執行時期參數\n" -" -d 1-5 除錯等級\n" -" -D datadir 資料目錄\n" -" -F 關閉fsync\n" -" -o file 將除錯訊息寫入檔案\n" -" -x num 內部使用\n" - -# catalog/dependency.c:152 -#: catalog/dependency.c:152 -#, c-format -msgid "cannot drop %s because other objects depend on it" -msgstr "無法刪除 %s，因為有其它物件依存於它" - -# catalog/dependency.c:154 -#: catalog/dependency.c:154 -msgid "Use DROP ... CASCADE to drop the dependent objects too." -msgstr "使用DROP ... CASCADE刪除依存物件。" - -# catalog/dependency.c:212 -#: catalog/dependency.c:212 -#, c-format -msgid "failed to drop all objects depending on %s" -msgstr "刪除所有依存於 %s 的物件失敗" - -# catalog/dependency.c:312 catalog/dependency.c:717 -#: catalog/dependency.c:312 catalog/dependency.c:717 -#, c-format -msgid "cannot drop %s because it is required by the database system" -msgstr "無法刪除 %s，因為資料庫系統需要它" - -# catalog/dependency.c:451 -#: catalog/dependency.c:451 -#, c-format -msgid "cannot drop %s because %s requires it" -msgstr "無法刪除 %s，因為 %s 需要它" - -# catalog/dependency.c:453 -#: catalog/dependency.c:453 -#, c-format -msgid "You may drop %s instead." -msgstr "你可以改為刪除 %s。" - -# catalog/dependency.c:521 catalog/dependency.c:674 catalog/dependency.c:702 -#: catalog/dependency.c:521 catalog/dependency.c:674 catalog/dependency.c:702 -#, c-format -msgid "drop auto-cascades to %s" -msgstr "" - -# catalog/dependency.c:526 catalog/dependency.c:679 -#: catalog/dependency.c:526 catalog/dependency.c:679 -#, c-format -msgid "%s depends on %s" -msgstr "%s 依存於 %s" - -# catalog/dependency.c:533 catalog/dependency.c:686 -#: catalog/dependency.c:533 catalog/dependency.c:686 -#, c-format -msgid "drop cascades to %s" -msgstr "" - -# catalog/dependency.c:1427 -#: catalog/dependency.c:1427 -#, c-format -msgid " column %s" -msgstr "" - -# catalog/dependency.c:1433 -#: catalog/dependency.c:1433 -#, c-format -msgid "function %s" -msgstr "函式 %s" - -# catalog/dependency.c:1438 -#: catalog/dependency.c:1438 -#, c-format -msgid "type %s" -msgstr "型別 %s" - -# catalog/dependency.c:1468 -#: catalog/dependency.c:1468 -#, c-format -msgid "cast from %s to %s" -msgstr "" - -# catalog/dependency.c:1505 -#: catalog/dependency.c:1505 -#, c-format -msgid "constraint %s on " -msgstr "" - -# catalog/dependency.c:1511 -#: catalog/dependency.c:1511 -#, c-format -msgid "constraint %s" -msgstr "" - -# catalog/dependency.c:1530 -#: catalog/dependency.c:1530 -#, c-format -msgid "conversion %s" -msgstr "" - -# catalog/dependency.c:1567 -#: catalog/dependency.c:1567 -#, c-format -msgid "default for %s" -msgstr "" - -# catalog/dependency.c:1585 -#: catalog/dependency.c:1585 -#, c-format -msgid "language %s" -msgstr "語言 %s" - -# catalog/dependency.c:1592 -#: catalog/dependency.c:1592 -#, c-format -msgid "operator %s" -msgstr "" - -# catalog/dependency.c:1626 -#: catalog/dependency.c:1626 -#, c-format -msgid "operator class %s for access method %s" -msgstr "" - -# catalog/dependency.c:1662 -#: catalog/dependency.c:1662 -#, c-format -msgid "rule %s on " -msgstr "" - -# catalog/dependency.c:1697 -#: catalog/dependency.c:1697 -#, c-format -msgid "trigger %s on " -msgstr "" - -# catalog/dependency.c:1714 -#: catalog/dependency.c:1714 -#, c-format -msgid "schema %s" -msgstr "" - -# catalog/dependency.c:1758 -#: catalog/dependency.c:1758 -#, c-format -msgid "table %s" -msgstr "資料表 %s" - -# catalog/dependency.c:1762 -#: catalog/dependency.c:1762 -#, c-format -msgid "index %s" -msgstr "索引 %s" - -# catalog/dependency.c:1766 -#: catalog/dependency.c:1766 -#, c-format -msgid "special system relation %s" -msgstr "特別系統relation %s" - -# catalog/dependency.c:1770 -#: catalog/dependency.c:1770 -#, c-format -msgid "sequence %s" -msgstr "" - -# catalog/dependency.c:1774 -#: catalog/dependency.c:1774 -#, c-format -msgid "uncataloged table %s" -msgstr "" - -# catalog/dependency.c:1778 -#: catalog/dependency.c:1778 -#, c-format -msgid "toast table %s" -msgstr "" - -# catalog/dependency.c:1782 -#: catalog/dependency.c:1782 -#, c-format -msgid "view %s" -msgstr "" - -# catalog/dependency.c:1786 -#: catalog/dependency.c:1786 -#, c-format -msgid "composite type %s" -msgstr "複合型別 %s" - -# catalog/dependency.c:1791 -#: catalog/dependency.c:1791 -#, c-format -msgid "relation %s" -msgstr "" - -# catalog/aclchk.c:158 -#: catalog/aclchk.c:158 -msgid "grant options can only be granted to individual users" -msgstr "" - -# catalog/aclchk.c:246 -#: catalog/aclchk.c:246 -#, c-format -msgid "invalid privilege type %s for table" -msgstr "無效的 table 權限型別 %s" - -# catalog/aclchk.c:334 catalog/aclchk.c:492 catalog/aclchk.c:646 -# catalog/aclchk.c:809 catalog/aclchk.c:962 catalog/aclchk.c:1121 -#: catalog/aclchk.c:334 catalog/aclchk.c:492 catalog/aclchk.c:646 -#: catalog/aclchk.c:809 catalog/aclchk.c:962 catalog/aclchk.c:1121 -msgid "no privileges were granted" -msgstr "未被賦予任何權限" - -# catalog/aclchk.c:338 catalog/aclchk.c:496 catalog/aclchk.c:650 -# catalog/aclchk.c:813 catalog/aclchk.c:966 catalog/aclchk.c:1125 -#: catalog/aclchk.c:338 catalog/aclchk.c:496 catalog/aclchk.c:650 -#: catalog/aclchk.c:813 catalog/aclchk.c:966 catalog/aclchk.c:1125 -msgid "not all privileges were granted" -msgstr "只能賦予部份權限" - -# catalog/aclchk.c:345 catalog/aclchk.c:503 catalog/aclchk.c:657 -# catalog/aclchk.c:820 catalog/aclchk.c:973 catalog/aclchk.c:1132 -#: catalog/aclchk.c:345 catalog/aclchk.c:503 catalog/aclchk.c:657 -#: catalog/aclchk.c:820 catalog/aclchk.c:973 catalog/aclchk.c:1132 -msgid "no privileges could be revoked" -msgstr "無法取消任何權限" - -# catalog/aclchk.c:349 catalog/aclchk.c:507 catalog/aclchk.c:661 -# catalog/aclchk.c:824 catalog/aclchk.c:977 catalog/aclchk.c:1136 -#: catalog/aclchk.c:349 catalog/aclchk.c:507 catalog/aclchk.c:661 -#: catalog/aclchk.c:824 catalog/aclchk.c:977 catalog/aclchk.c:1136 -msgid "not all privileges could be revoked" -msgstr "只能取消部份權限" - -# catalog/aclchk.c:414 -#: catalog/aclchk.c:414 -#, c-format -msgid "invalid privilege type %s for database" -msgstr "無效的 database 權限型別 %s" - -# catalog/aclchk.c:451 commands/comment.c:458 commands/dbcommands.c:521 -# commands/dbcommands.c:645 commands/dbcommands.c:740 -# commands/dbcommands.c:814 utils/adt/acl.c:1661 utils/init/postinit.c:264 -# utils/init/postinit.c:276 -#: catalog/aclchk.c:451 commands/comment.c:458 commands/dbcommands.c:550 -#: commands/dbcommands.c:679 commands/dbcommands.c:779 -#: commands/dbcommands.c:866 utils/adt/acl.c:1661 utils/init/postinit.c:271 -#: utils/init/postinit.c:283 -#, c-format -msgid "database \"%s\" does not exist" -msgstr "資料庫\"%s\"不存在" - -# catalog/aclchk.c:572 -#: catalog/aclchk.c:572 -#, c-format -msgid "invalid privilege type %s for function" -msgstr "無效的 function 權限型別 %s" - -# catalog/aclchk.c:726 -#: catalog/aclchk.c:726 -#, c-format -msgid "invalid privilege type %s for language" -msgstr "無效的 language 權限型別 %s" - -# catalog/aclchk.c:758 commands/comment.c:1001 commands/functioncmds.c:451 -# commands/proclang.c:202 commands/proclang.c:257 utils/adt/acl.c:2079 -#: catalog/aclchk.c:758 commands/comment.c:1001 commands/functioncmds.c:451 -#: commands/proclang.c:202 commands/proclang.c:257 utils/adt/acl.c:2079 -#, c-format -msgid "language \"%s\" does not exist" -msgstr "語言\"%s\"不存在" - -# catalog/aclchk.c:764 -#: catalog/aclchk.c:764 -#, c-format -msgid "language \"%s\" is not trusted" -msgstr "語言\"%s\"不受信任" - -# catalog/aclchk.c:765 -#: catalog/aclchk.c:765 -msgid "Only superusers may use untrusted languages." -msgstr "" - -# catalog/aclchk.c:889 -#: catalog/aclchk.c:889 -#, c-format -msgid "invalid privilege type %s for schema" -msgstr "無效的 schema 權限型別 %s" - -# catalog/aclchk.c:921 catalog/namespace.c:255 catalog/namespace.c:1229 -# catalog/namespace.c:1267 catalog/namespace.c:1866 commands/comment.c:509 -# commands/schemacmds.c:210 commands/schemacmds.c:272 -# commands/schemacmds.c:327 utils/adt/acl.c:2283 -#: catalog/aclchk.c:921 catalog/namespace.c:255 catalog/namespace.c:1229 -#: catalog/namespace.c:1267 catalog/namespace.c:1866 commands/comment.c:509 -#: commands/schemacmds.c:181 commands/schemacmds.c:243 -#: commands/schemacmds.c:298 utils/adt/acl.c:2283 -#, c-format -msgid "schema \"%s\" does not exist" -msgstr "schema \"%s\"不存在" - -# catalog/aclchk.c:1043 -#: catalog/aclchk.c:1043 -#, c-format -msgid "invalid privilege type %s for tablespace" -msgstr "無效的 tablespace 權限型別 %s" - -# catalog/aclchk.c:1080 commands/dbcommands.c:276 commands/indexcmds.c:169 -# commands/schemacmds.c:117 commands/tablecmds.c:327 -# commands/tablecmds.c:5384 commands/tablespace.c:429 -# commands/tablespace.c:823 commands/tablespace.c:890 utils/adt/acl.c:2489 -#: catalog/aclchk.c:1080 commands/dbcommands.c:277 commands/indexcmds.c:171 -#: commands/tablecmds.c:324 commands/tablecmds.c:5435 -#: commands/tablespace.c:425 commands/tablespace.c:750 -#: commands/tablespace.c:817 commands/tablespace.c:896 utils/adt/acl.c:2489 -#, c-format -msgid "tablespace \"%s\" does not exist" -msgstr "tablespace \"%s\"不存在" - -# catalog/aclchk.c:1229 commands/user.c:1535 commands/user.c:1772 -# commands/user.c:1807 libpq/pqcomm.c:499 -#: catalog/aclchk.c:1229 commands/user.c:1535 commands/user.c:1772 -#: commands/user.c:1807 libpq/pqcomm.c:499 -#, c-format -msgid "group \"%s\" does not exist" -msgstr "群組\"%s\"不存在" - -# catalog/aclchk.c:1264 -#: catalog/aclchk.c:1264 -#, c-format -msgid "permission denied for relation %s" -msgstr "存取relation %s被拒" - -# catalog/aclchk.c:1266 -#: catalog/aclchk.c:1266 -#, c-format -msgid "permission denied for database %s" -msgstr "存取資料庫%s被拒" - -# catalog/aclchk.c:1268 -#: catalog/aclchk.c:1268 -#, c-format -msgid "permission denied for function %s" -msgstr "存取函式%s被拒" - -# catalog/aclchk.c:1270 -#: catalog/aclchk.c:1270 -#, c-format -msgid "permission denied for operator %s" -msgstr "存取operator %s被拒" - -# catalog/aclchk.c:1272 -#: catalog/aclchk.c:1272 -#, c-format -msgid "permission denied for type %s" -msgstr "存取資料型別%s被拒" - -# catalog/aclchk.c:1274 -#: catalog/aclchk.c:1274 -#, c-format -msgid "permission denied for language %s" -msgstr "存取語言%s被拒" - -# catalog/aclchk.c:1276 -#: catalog/aclchk.c:1276 -#, c-format -msgid "permission denied for schema %s" -msgstr "存取schema %s被拒" - -# catalog/aclchk.c:1278 -#: catalog/aclchk.c:1278 -#, c-format -msgid "permission denied for operator class %s" -msgstr "存取operator class %s被拒" - -# catalog/aclchk.c:1280 -#: catalog/aclchk.c:1280 -#, c-format -msgid "permission denied for conversion %s" -msgstr "存取conversion %s被拒" - -# catalog/aclchk.c:1282 -#: catalog/aclchk.c:1282 -#, c-format -msgid "permission denied for tablespace %s" -msgstr "存取tablespace %s被拒" - -# catalog/aclchk.c:1288 -#: catalog/aclchk.c:1288 -#, c-format -msgid "must be owner of relation %s" -msgstr "必須是relation %s的擁有者" - -# catalog/aclchk.c:1290 -#: catalog/aclchk.c:1290 -#, c-format -msgid "must be owner of database %s" -msgstr "必須是資料庫%s的擁有者" - -# catalog/aclchk.c:1292 -#: catalog/aclchk.c:1292 -#, c-format -msgid "must be owner of function %s" -msgstr "必須是函式%s的擁有者" - -# catalog/aclchk.c:1294 -#: catalog/aclchk.c:1294 -#, c-format -msgid "must be owner of operator %s" -msgstr "必須是operator %s的擁有者" - -# catalog/aclchk.c:1296 -#: catalog/aclchk.c:1296 -#, c-format -msgid "must be owner of type %s" -msgstr "必須是型別%s的擁有者" - -# catalog/aclchk.c:1298 -#: catalog/aclchk.c:1298 -#, c-format -msgid "must be owner of language %s" -msgstr "必須是語言%s的擁有者" - -# catalog/aclchk.c:1300 -#: catalog/aclchk.c:1300 -#, c-format -msgid "must be owner of schema %s" -msgstr "必須是schema %s的擁有者" - -# catalog/aclchk.c:1302 -#: catalog/aclchk.c:1302 -#, c-format -msgid "must be owner of operator class %s" -msgstr "必須是operator class %s的擁有者" - -# catalog/aclchk.c:1304 -#: catalog/aclchk.c:1304 -#, c-format -msgid "must be owner of conversion %s" -msgstr "必須是conversion %s的擁有者" - -# catalog/aclchk.c:1306 -#: catalog/aclchk.c:1306 -#, c-format -msgid "must be owner of tablespace %s" -msgstr "必須是tablespace %s的擁有者" - -# catalog/aclchk.c:1369 -#: catalog/aclchk.c:1369 -#, c-format -msgid "user with ID %u does not exist" -msgstr "ID為 %u 的使用者不存在" - -# catalog/aclchk.c:1386 catalog/aclchk.c:1889 -#: catalog/aclchk.c:1386 catalog/aclchk.c:1889 -#, c-format -msgid "relation with OID %u does not exist" -msgstr "OID為 %u 的relation不存在" - -# catalog/aclchk.c:1490 catalog/aclchk.c:2107 -#: catalog/aclchk.c:1490 catalog/aclchk.c:2107 -#, c-format -msgid "database with OID %u does not exist" -msgstr "OID為 %u 的資料庫不存在" - -# catalog/aclchk.c:1548 catalog/aclchk.c:1973 tcop/fastpath.c:230 -#: catalog/aclchk.c:1548 catalog/aclchk.c:1973 tcop/fastpath.c:230 -#, c-format -msgid "function with OID %u does not exist" -msgstr "OID為 %u 的函式不存在" - -# catalog/aclchk.c:1604 -#: catalog/aclchk.c:1604 -#, c-format -msgid "language with OID %u does not exist" -msgstr "OID為 %u 的語言不存在" - -# catalog/aclchk.c:1689 catalog/aclchk.c:2001 -#: catalog/aclchk.c:1689 catalog/aclchk.c:2001 -#, c-format -msgid "schema with OID %u does not exist" -msgstr "OID為 %u 的schema不存在" - -# catalog/aclchk.c:1761 catalog/aclchk.c:2039 -#: catalog/aclchk.c:1761 catalog/aclchk.c:2039 -#, c-format -msgid "tablespace with OID %u does not exist" -msgstr "OID為 %u 的tablespace不存在" - -# catalog/aclchk.c:1917 -#: catalog/aclchk.c:1917 -#, c-format -msgid "type with OID %u does not exist" -msgstr "OID為 %u 的型別不存在" - -# catalog/aclchk.c:1945 -#: catalog/aclchk.c:1945 -#, c-format -msgid "operator with OID %u does not exist" -msgstr "OID為 %u 的operator不存在" - -# catalog/aclchk.c:2068 -#: catalog/aclchk.c:2068 -#, c-format -msgid "operator class with OID %u does not exist" -msgstr "OID為 %u 的operator class不存在" - -# catalog/aclchk.c:2136 -#: catalog/aclchk.c:2136 -#, c-format -msgid "conversion with OID %u does not exist" -msgstr "OID為 %u 的conversion不存在" - -# catalog/pg_aggregate.c:80 -#: catalog/pg_aggregate.c:80 -msgid "cannot determine transition data type" -msgstr "無法判斷交易資料型別" - -# catalog/pg_aggregate.c:81 -#: catalog/pg_aggregate.c:81 -msgid "" -"An aggregate using \"anyarray\" or \"anyelement\" as transition type must " -"have one of them as its base type." -msgstr "" - -# catalog/pg_aggregate.c:110 -#: catalog/pg_aggregate.c:110 -#, c-format -msgid "return type of transition function %s is not %s" -msgstr "" - -# catalog/pg_aggregate.c:132 -#: catalog/pg_aggregate.c:132 -msgid "" -"must not omit initial value when transition function is strict and " -"transition type is not compatible with input type" -msgstr "" - -# catalog/pg_aggregate.c:165 catalog/pg_proc.c:124 executor/functions.c:1082 -#: catalog/pg_aggregate.c:165 catalog/pg_proc.c:124 executor/functions.c:1082 -msgid "cannot determine result data type" -msgstr "無法識別結果資料型別" - -# catalog/pg_aggregate.c:166 -#: catalog/pg_aggregate.c:166 -msgid "" -"An aggregate returning \"anyarray\" or \"anyelement\" must have one of them " -"as its base type." -msgstr "" - -# catalog/pg_aggregate.c:281 commands/typecmds.c:919 commands/typecmds.c:989 -# commands/typecmds.c:1021 commands/typecmds.c:1053 commands/typecmds.c:1077 -# parser/parse_func.c:203 parser/parse_func.c:1364 -#: catalog/pg_aggregate.c:281 commands/typecmds.c:919 commands/typecmds.c:989 -#: commands/typecmds.c:1021 commands/typecmds.c:1053 commands/typecmds.c:1077 -#: parser/parse_func.c:203 parser/parse_func.c:1364 -#, c-format -msgid "function %s does not exist" -msgstr "函式 %s 不存在" - -# catalog/pg_aggregate.c:286 -#: catalog/pg_aggregate.c:286 -#, c-format -msgid "function %s returns a set" -msgstr "函式%s傳回一個set" - -# catalog/pg_aggregate.c:317 catalog/pg_aggregate.c:326 -#: catalog/pg_aggregate.c:317 catalog/pg_aggregate.c:326 -#, c-format -msgid "function %s requires run-time type coercion" -msgstr "" - -# catalog/heap.c:221 -#: catalog/heap.c:221 -#, c-format -msgid "permission denied to create \"%s.%s\"" -msgstr "建立\"%s.%s\"被拒絕" - -# catalog/heap.c:223 -#: catalog/heap.c:223 -msgid "System catalog modifications are currently disallowed." -msgstr "目前不允許修改系統catalog。" - -# catalog/heap.c:382 commands/tablecmds.c:2897 -#: catalog/heap.c:382 commands/tablecmds.c:697 commands/tablecmds.c:1007 -#: commands/tablecmds.c:2927 -#, c-format -msgid "tables can have at most %d columns" -msgstr "資料表最多可以有 %d 個欄位" - -# catalog/heap.c:399 -#: catalog/heap.c:399 -#, c-format -msgid "column name \"%s\" conflicts with a system column name" -msgstr "欄位名稱\"%s\"與系統欄位名稱衝突" - -# catalog/heap.c:415 -#: catalog/heap.c:415 -#, c-format -msgid "column name \"%s\" is duplicated" -msgstr "欄位名稱\"%s\"重覆" - -# catalog/heap.c:452 -#: catalog/heap.c:452 -#, c-format -msgid "column \"%s\" has type \"unknown\"" -msgstr "欄位\"%s\"的資料型別是\"unknown\"" - -# catalog/heap.c:453 -#: catalog/heap.c:453 -msgid "Proceeding with relation creation anyway." -msgstr "" - -# catalog/heap.c:460 -#: catalog/heap.c:460 -#, c-format -msgid "column \"%s\" has pseudo-type %s" -msgstr "" - -# catalog/heap.c:747 catalog/index.c:527 commands/tablecmds.c:1471 -#: catalog/heap.c:747 catalog/index.c:527 commands/tablecmds.c:1501 -#, c-format -msgid "relation \"%s\" already exists" -msgstr "relation \"%s\"已經存在" - -# catalog/heap.c:1601 -#: catalog/heap.c:1601 -#, c-format -msgid "only table \"%s\" can be referenced in check constraint" -msgstr "只有資料表\"%s\"可以在check constraint中被參照" - -# catalog/heap.c:1610 commands/typecmds.c:1872 -#: catalog/heap.c:1610 commands/typecmds.c:1872 -msgid "cannot use subquery in check constraint" -msgstr "check constraint中不能使用子查詢" - -# catalog/heap.c:1614 -#: catalog/heap.c:1614 -msgid "cannot use aggregate function in check constraint" -msgstr "check constraint中不能使用aggregate function" - -# catalog/heap.c:1631 commands/tablecmds.c:3692 -#: catalog/heap.c:1631 commands/tablecmds.c:3722 -#, c-format -msgid "constraint \"%s\" for relation \"%s\" already exists" -msgstr "" - -# catalog/heap.c:1640 -#: catalog/heap.c:1640 -#, c-format -msgid "check constraint \"%s\" already exists" -msgstr "check constraint \"%s\"已經存在" - -# catalog/heap.c:1789 -#: catalog/heap.c:1789 -msgid "cannot use column references in default expression" -msgstr "預設值expression中不能使用欄位參照" - -# catalog/heap.c:1797 -#: catalog/heap.c:1797 -msgid "default expression must not return a set" -msgstr "預設值expression不能傳回一個set" - -# catalog/heap.c:1805 -#: catalog/heap.c:1805 -msgid "cannot use subquery in default expression" -msgstr "預設值expression中不能使用子查詢" - -# catalog/heap.c:1809 -#: catalog/heap.c:1809 -msgid "cannot use aggregate function in default expression" -msgstr "預設值expression中不能使用aggregate function" - -# catalog/heap.c:1827 rewrite/rewriteHandler.c:646 -#: catalog/heap.c:1827 rewrite/rewriteHandler.c:647 -#, c-format -msgid "column \"%s\" is of type %s but default expression is of type %s" -msgstr "欄位\"%s\"是型別 %s，但是預設值expression是型別 %s" - -# catalog/heap.c:1832 parser/analyze.c:2689 parser/parse_node.c:247 -# parser/parse_target.c:362 parser/parse_target.c:570 -# parser/parse_target.c:579 rewrite/rewriteHandler.c:651 -#: catalog/heap.c:1832 parser/analyze.c:2701 parser/parse_node.c:247 -#: parser/parse_target.c:362 parser/parse_target.c:572 -#: parser/parse_target.c:581 rewrite/rewriteHandler.c:652 -msgid "You will need to rewrite or cast the expression." -msgstr "" - -# catalog/heap.c:2093 -#: catalog/heap.c:2093 -msgid "cannot truncate a table referenced in a foreign key constraint" -msgstr "" - -# catalog/heap.c:2094 -#: catalog/heap.c:2094 -#, c-format -msgid "Table \"%s\" references \"%s\" via foreign key constraint \"%s\"." -msgstr "" - -# catalog/index.c:508 -#: catalog/index.c:508 -msgid "user-defined indexes on system catalog tables are not supported" -msgstr "" - -# catalog/index.c:522 -#: catalog/index.c:522 -msgid "shared indexes cannot be created after initdb" -msgstr "共享的索引無法在 initdb 後建立" - -# catalog/index.c:1685 -#: catalog/index.c:1679 -#, c-format -msgid "shared index \"%s\" can only be reindexed in stand-alone mode" -msgstr "共享的索引 \"%s\" 只能在 stand-alone 模式下重新索引" - -# catalog/namespace.c:173 catalog/namespace.c:228 -#: catalog/namespace.c:173 catalog/namespace.c:228 -#, c-format -msgid "cross-database references are not implemented: \"%s.%s.%s\"" -msgstr "跨資料庫參照尚未實做：\"%s.%s.%s\"" - -# catalog/namespace.c:195 -#: catalog/namespace.c:195 -#, c-format -msgid "relation \"%s.%s\" does not exist" -msgstr "relation \"%s.%s\"不存在" - -# catalog/namespace.c:200 utils/adt/regproc.c:837 -#: catalog/namespace.c:200 utils/adt/regproc.c:837 -#, c-format -msgid "relation \"%s\" does not exist" -msgstr "relation \"%s\"不存在" - -# catalog/namespace.c:239 -#: catalog/namespace.c:239 -msgid "temporary tables may not specify a schema name" -msgstr "暫存資料表不能指定schema名稱" - -# catalog/namespace.c:267 catalog/namespace.c:1278 -#: catalog/namespace.c:267 catalog/namespace.c:1278 -msgid "no schema has been selected to create in" -msgstr "" - -# catalog/namespace.c:1195 parser/parse_expr.c:1157 parser/parse_target.c:725 -#: catalog/namespace.c:1195 parser/parse_expr.c:1157 parser/parse_target.c:727 -#, c-format -msgid "cross-database references are not implemented: %s" -msgstr "" - -# catalog/namespace.c:1201 gram.y:2516 gram.y:7422 parser/parse_expr.c:1183 -# parser/parse_target.c:734 -#: catalog/namespace.c:1201 gram.y:2515 gram.y:7425 parser/parse_expr.c:1183 -#: parser/parse_target.c:736 -#, c-format -msgid "improper qualified name (too many dotted names): %s" -msgstr "" - -# catalog/namespace.c:1313 -#: catalog/namespace.c:1313 -#, c-format -msgid "improper relation name (too many dotted names): %s" -msgstr "" - -# catalog/namespace.c:1659 -#: catalog/namespace.c:1659 -#, c-format -msgid "permission denied to create temporary tables in database \"%s\"" -msgstr "" - -# catalog/pg_largeobject.c:107 commands/comment.c:1151 -# storage/large_object/inv_api.c:197 storage/large_object/inv_api.c:312 -#: catalog/pg_largeobject.c:107 commands/comment.c:1151 -#: storage/large_object/inv_api.c:197 storage/large_object/inv_api.c:312 -#, c-format -msgid "large object %u does not exist" -msgstr "large object %u不存在" - -# catalog/pg_conversion.c:66 -#: catalog/pg_conversion.c:66 -#, c-format -msgid "conversion \"%s\" already exists" -msgstr "conversion \"%s\"已經存在" - -# catalog/pg_conversion.c:79 -#: catalog/pg_conversion.c:79 -#, c-format -msgid "default conversion for %s to %s already exists" -msgstr "" - -# catalog/pg_conversion.c:307 commands/comment.c:958 -# commands/conversioncmds.c:109 commands/conversioncmds.c:133 -# commands/conversioncmds.c:192 -#: catalog/pg_conversion.c:307 commands/comment.c:958 -#: commands/conversioncmds.c:109 commands/conversioncmds.c:133 -#: commands/conversioncmds.c:192 -#, c-format -msgid "conversion \"%s\" does not exist" -msgstr "conversion \"%s\"不存在" - -# catalog/pg_namespace.c:51 commands/schemacmds.c:281 -#: catalog/pg_namespace.c:51 commands/schemacmds.c:252 -#, c-format -msgid "schema \"%s\" already exists" -msgstr "schema \"%s\"已經存在" - -# catalog/pg_operator.c:217 catalog/pg_operator.c:406 -#: catalog/pg_operator.c:217 catalog/pg_operator.c:406 -#, c-format -msgid "\"%s\" is not a valid operator name" -msgstr "\"%s\"不是合法的operator名稱" - -# catalog/pg_operator.c:412 -#: catalog/pg_operator.c:412 -msgid "at least one of leftarg or rightarg must be specified" -msgstr "" - -# catalog/pg_operator.c:420 -#: catalog/pg_operator.c:420 -msgid "only binary operators can have commutators" -msgstr "" - -# catalog/pg_operator.c:424 -#: catalog/pg_operator.c:424 -msgid "only binary operators can have join selectivity" -msgstr "" - -# catalog/pg_operator.c:428 -#: catalog/pg_operator.c:428 -msgid "only binary operators can hash" -msgstr "" - -# catalog/pg_operator.c:432 -#: catalog/pg_operator.c:432 -msgid "only binary operators can merge join" -msgstr "" - -# catalog/pg_operator.c:444 -#: catalog/pg_operator.c:444 -#, c-format -msgid "operator %s already exists" -msgstr "operator %s已經存在" - -# catalog/pg_operator.c:726 -#: catalog/pg_operator.c:726 -msgid "operator cannot be its own negator or sort operator" -msgstr "" - -# catalog/pg_proc.c:100 commands/functioncmds.c:154 parser/parse_func.c:1388 -#: catalog/pg_proc.c:100 commands/functioncmds.c:154 parser/parse_func.c:1388 -#, c-format -msgid "functions cannot have more than %d arguments" -msgstr "" - -# catalog/pg_proc.c:125 executor/functions.c:1083 -#: catalog/pg_proc.c:125 executor/functions.c:1083 -msgid "" -"A function returning \"anyarray\" or \"anyelement\" must have at least one " -"argument of either type." -msgstr "" - -# catalog/pg_proc.c:145 -#: catalog/pg_proc.c:145 -#, c-format -msgid "\"%s\" is already an attribute of type %s" -msgstr "" - -# catalog/pg_proc.c:200 -#: catalog/pg_proc.c:200 -#, c-format -msgid "function \"%s\" already exists with same argument types" -msgstr "" - -# catalog/pg_proc.c:214 -#: catalog/pg_proc.c:214 -msgid "cannot change return type of existing function" -msgstr "" - -# catalog/pg_proc.c:215 -#: catalog/pg_proc.c:215 -msgid "Use DROP FUNCTION first." -msgstr "請先執行DROP FUNCTION。" - -# catalog/pg_proc.c:223 -#: catalog/pg_proc.c:223 -#, c-format -msgid "function \"%s\" is an aggregate" -msgstr "函式\"%s\"是aggregate" - -# catalog/pg_proc.c:228 -#: catalog/pg_proc.c:228 -#, c-format -msgid "function \"%s\" is not an aggregate" -msgstr "函式\"%s\"不是aggregate" - -# catalog/pg_proc.c:387 -#: catalog/pg_proc.c:387 -#, c-format -msgid "there is no built-in function named \"%s\"" -msgstr "內建函式中沒有\"%s\"" - -# catalog/pg_proc.c:487 -#: catalog/pg_proc.c:487 -#, c-format -msgid "SQL functions cannot return type %s" -msgstr "SQL函式不能傳回型別%s" - -# catalog/pg_proc.c:503 -#: catalog/pg_proc.c:503 -#, c-format -msgid "SQL functions cannot have arguments of type %s" -msgstr "SQL函式不能有%s型別的引數" - -# catalog/pg_proc.c:574 executor/functions.c:803 -#: catalog/pg_proc.c:574 executor/functions.c:803 -#, c-format -msgid "SQL function \"%s\"" -msgstr "SQL函式\"%s\"" - -# catalog/pg_type.c:198 -#: catalog/pg_type.c:198 -#, c-format -msgid "invalid type internal size %d" -msgstr "無效的型別內部大小 %d" - -# catalog/pg_type.c:204 -#: catalog/pg_type.c:204 -#, c-format -msgid "internal size %d is invalid for passed-by-value type" -msgstr "" - -# catalog/pg_type.c:211 -#: catalog/pg_type.c:211 -msgid "fixed-size types must have storage PLAIN" -msgstr "" - -# catalog/pg_type.c:293 catalog/pg_type.c:525 -#: catalog/pg_type.c:293 catalog/pg_type.c:525 -#, c-format -msgid "type \"%s\" already exists" -msgstr "\"%s\"型別已經存在" - -# catalog/pg_type.c:517 commands/functioncmds.c:110 commands/tablecmds.c:4588 -# commands/typecmds.c:423 commands/typecmds.c:809 commands/typecmds.c:1167 -# commands/typecmds.c:1288 commands/typecmds.c:1400 commands/typecmds.c:1487 -# commands/typecmds.c:2072 parser/parse_func.c:1401 parser/parse_type.c:201 -# parser/parse_type.c:227 tcop/utility.c:97 utils/adt/regproc.c:1003 -#: catalog/pg_type.c:517 commands/functioncmds.c:110 commands/tablecmds.c:4632 -#: commands/typecmds.c:423 commands/typecmds.c:809 commands/typecmds.c:1167 -#: commands/typecmds.c:1288 commands/typecmds.c:1400 commands/typecmds.c:1487 -#: commands/typecmds.c:2072 parser/parse_func.c:1401 parser/parse_type.c:201 -#: parser/parse_type.c:227 tcop/utility.c:97 utils/adt/regproc.c:1003 -#, c-format -msgid "type \"%s\" does not exist" -msgstr "\"%s\"型別不存在" - -# commands/aggregatecmds.c:97 -#: commands/aggregatecmds.c:97 -#, c-format -msgid "aggregate attribute \"%s\" not recognized" -msgstr "" - -# commands/aggregatecmds.c:107 -#: commands/aggregatecmds.c:107 -msgid "aggregate basetype must be specified" -msgstr "必須指定aggregate basetype" - -# commands/aggregatecmds.c:111 -#: commands/aggregatecmds.c:111 -msgid "aggregate stype must be specified" -msgstr "必須指定aggregate stype" - -# commands/aggregatecmds.c:115 -#: commands/aggregatecmds.c:115 -msgid "aggregate sfunc must be specified" -msgstr "必須指定aggregate sfunc" - -# commands/aggregatecmds.c:138 -#: commands/aggregatecmds.c:138 -#, c-format -msgid "aggregate transition data type cannot be %s" -msgstr "" - -# commands/aggregatecmds.c:258 -#: commands/aggregatecmds.c:258 -#, c-format -msgid "function %s(*) already exists in schema \"%s\"" -msgstr "函式%s(*)已經存在於schema\"%s\"" - -# commands/aggregatecmds.c:264 commands/functioncmds.c:699 -#: commands/aggregatecmds.c:264 commands/functioncmds.c:699 -#, c-format -msgid "function %s already exists in schema \"%s\"" -msgstr "函式%s已經存在於schema\"%s\"" - -# commands/aggregatecmds.c:335 commands/conversioncmds.c:213 -# commands/dbcommands.c:838 commands/functioncmds.c:773 -# commands/opclasscmds.c:954 commands/operatorcmds.c:303 -# commands/schemacmds.c:348 commands/tablecmds.c:5177 -# commands/tablespace.c:912 commands/typecmds.c:2103 -#: commands/aggregatecmds.c:335 commands/conversioncmds.c:213 -#: commands/dbcommands.c:890 commands/functioncmds.c:773 -#: commands/opclasscmds.c:954 commands/operatorcmds.c:303 -#: commands/schemacmds.c:319 commands/tablecmds.c:5228 -#: commands/tablespace.c:839 commands/typecmds.c:2103 -msgid "must be superuser to change owner" -msgstr "只有管理者能修改擁有者" - -# commands/analyze.c:153 -#: commands/analyze.c:153 -#, c-format -msgid "skipping \"%s\" --- only table or database owner can analyze it" -msgstr "忽略\"%s\" -- 只有資料表或資料庫擁有者能進行分析" - -# commands/analyze.c:168 -#: commands/analyze.c:168 -#, c-format -msgid "" -"skipping \"%s\" --- cannot analyze indexes, views, or special system tables" -msgstr "忽略\"%s\" -- 無法分析索引、view或特殊系統資料表" - -# commands/analyze.c:198 -#: commands/analyze.c:198 -#, c-format -msgid "analyzing \"%s.%s\"" -msgstr "分析\"%s.%s\"" - -# commands/analyze.c:916 -#: commands/analyze.c:912 -#, c-format -msgid "" -"\"%s\": scanned %d of %u pages, containing %.0f live rows and %.0f dead " -"rows; %d rows in sample, %.0f estimated total rows" -msgstr "" - -# commands/cluster.c:133 -#: commands/cluster.c:133 -#, c-format -msgid "there is no previously clustered index for table \"%s\"" -msgstr "" - -# commands/cluster.c:147 commands/tablecmds.c:5326 -#: commands/cluster.c:147 commands/tablecmds.c:5377 -#, c-format -msgid "index \"%s\" for table \"%s\" does not exist" -msgstr "索引\"%s\"於資料表\"%s\"不存在" - -# commands/cluster.c:326 -#: commands/cluster.c:326 -#, c-format -msgid "\"%s\" is not an index for table \"%s\"" -msgstr "\"%s\"不是資料表\"%s\"的索引" - -# commands/cluster.c:339 -#: commands/cluster.c:339 -msgid "cannot cluster on partial index" -msgstr "無法cluter partial索引" - -# commands/cluster.c:357 -#: commands/cluster.c:357 -msgid "cannot cluster when index access method does not handle null values" -msgstr "" - -# commands/cluster.c:358 -#: commands/cluster.c:358 -#, c-format -msgid "You may be able to work around this by marking column \"%s\" NOT NULL." -msgstr "" - -# commands/cluster.c:370 -#: commands/cluster.c:370 -msgid "" -"cannot cluster on expressional index when index access method does not " -"handle null values" -msgstr "" - -# commands/cluster.c:384 -#: commands/cluster.c:384 -#, c-format -msgid "\"%s\" is a system catalog" -msgstr "\"%s\"是系統catalog" - -# commands/cluster.c:394 -#: commands/cluster.c:394 -msgid "cannot cluster temporary tables of other sessions" -msgstr "無法cluster其它sessions的暫存資疙表" - -# commands/conversioncmds.c:66 -#: commands/conversioncmds.c:66 -#, c-format -msgid "source encoding \"%s\" does not exist" -msgstr "來源編碼\"%s\"不存在" - -# commands/conversioncmds.c:73 -#: commands/conversioncmds.c:73 -#, c-format -msgid "destination encoding \"%s\" does not exist" -msgstr "目標編碼\"%s\"不存在" - -# commands/conversioncmds.c:151 -#: commands/conversioncmds.c:151 -#, c-format -msgid "conversion \"%s\" already exists in schema \"%s\"" -msgstr "conversion \"%s\"已經存在於schema \"%s\"" - -# commands/comment.c:334 commands/sequence.c:771 tcop/utility.c:83 -#: commands/comment.c:334 commands/sequence.c:767 tcop/utility.c:83 -#, c-format -msgid "\"%s\" is not a sequence" -msgstr "\"%s\"不是sequence" - -# commands/comment.c:341 commands/indexcmds.c:136 commands/indexcmds.c:937 -# commands/lockcmds.c:68 commands/tablecmds.c:541 commands/tablecmds.c:2594 -# commands/trigger.c:141 commands/trigger.c:546 tcop/utility.c:78 -#: commands/comment.c:341 commands/indexcmds.c:137 commands/indexcmds.c:951 -#: commands/lockcmds.c:68 commands/tablecmds.c:544 commands/tablecmds.c:2624 -#: commands/trigger.c:141 commands/trigger.c:546 tcop/utility.c:78 -#, c-format -msgid "\"%s\" is not a table" -msgstr "\"%s\"不是資料表" - -# commands/comment.c:348 commands/view.c:113 tcop/utility.c:88 -#: commands/comment.c:348 commands/view.c:113 tcop/utility.c:88 -#, c-format -msgid "\"%s\" is not a view" -msgstr "\"%s\"不是view" - -# commands/comment.c:404 commands/tablecmds.c:3070 commands/tablecmds.c:3163 -# commands/tablecmds.c:3215 commands/tablecmds.c:3311 -# commands/tablecmds.c:3372 commands/tablecmds.c:3438 -# commands/tablecmds.c:4564 commands/tablecmds.c:4701 -# parser/parse_relation.c:1647 parser/parse_relation.c:1705 -# parser/parse_relation.c:1919 parser/parse_type.c:94 -# utils/adt/ruleutils.c:1300 -#: commands/comment.c:404 commands/tablecmds.c:3100 commands/tablecmds.c:3193 -#: commands/tablecmds.c:3245 commands/tablecmds.c:3341 -#: commands/tablecmds.c:3402 commands/tablecmds.c:3468 -#: commands/tablecmds.c:4608 commands/tablecmds.c:4745 -#: parser/parse_relation.c:1641 parser/parse_relation.c:1700 -#: parser/parse_relation.c:1913 parser/parse_type.c:94 -#: utils/adt/ruleutils.c:1257 -#, c-format -msgid "column \"%s\" of relation \"%s\" does not exist" -msgstr "欄位\"%s\"於relation \"%s\"不存在" - -# commands/comment.c:435 -#: commands/comment.c:435 -msgid "database name may not be qualified" -msgstr "" - -# commands/comment.c:468 -#: commands/comment.c:468 -msgid "database comments may only be applied to the current database" -msgstr "" - -# commands/comment.c:500 commands/schemacmds.c:201 -#: commands/comment.c:500 commands/schemacmds.c:172 -msgid "schema name may not be qualified" -msgstr "" - -# commands/comment.c:582 -#: commands/comment.c:582 -#, c-format -msgid "rule \"%s\" does not exist" -msgstr "rule \"%s\"不存在" - -# commands/comment.c:590 -#: commands/comment.c:590 -#, c-format -msgid "there are multiple rules named \"%s\"" -msgstr "有多個rule名稱皆為\"%s\"" - -# commands/comment.c:591 -#: commands/comment.c:591 -msgid "Specify a relation name as well as a rule name." -msgstr "" - -# commands/comment.c:619 rewrite/rewriteDefine.c:582 -# rewrite/rewriteRemove.c:59 -#: commands/comment.c:619 rewrite/rewriteDefine.c:582 -#: rewrite/rewriteRemove.c:59 -#, c-format -msgid "rule \"%s\" for relation \"%s\" does not exist" -msgstr "" - -# commands/comment.c:836 commands/trigger.c:483 commands/trigger.c:697 -#: commands/comment.c:836 commands/trigger.c:483 commands/trigger.c:697 -#, c-format -msgid "trigger \"%s\" for table \"%s\" does not exist" -msgstr "" - -# commands/comment.c:916 -#: commands/comment.c:916 -#, c-format -msgid "table \"%s\" has multiple constraints named \"%s\"" -msgstr "" - -# commands/comment.c:928 -#: commands/comment.c:928 -#, c-format -msgid "constraint \"%s\" for table \"%s\" does not exist" -msgstr "" - -# commands/comment.c:992 -#: commands/comment.c:992 -msgid "language name may not be qualified" -msgstr "" - -# commands/comment.c:1007 -#: commands/comment.c:1007 -msgid "must be superuser to comment on procedural language" -msgstr "" - -# commands/comment.c:1048 commands/indexcmds.c:216 commands/opclasscmds.c:108 -# commands/opclasscmds.c:648 commands/opclasscmds.c:800 -# commands/opclasscmds.c:900 -#: commands/comment.c:1048 commands/indexcmds.c:230 commands/opclasscmds.c:108 -#: commands/opclasscmds.c:648 commands/opclasscmds.c:800 -#: commands/opclasscmds.c:900 -#, c-format -msgid "access method \"%s\" does not exist" -msgstr "存取方法\"%s\"不存在" - -# commands/comment.c:1077 commands/comment.c:1087 commands/indexcmds.c:600 -# commands/indexcmds.c:610 commands/opclasscmds.c:677 -# commands/opclasscmds.c:687 commands/opclasscmds.c:822 -# commands/opclasscmds.c:833 commands/opclasscmds.c:922 -# commands/opclasscmds.c:932 -#: commands/comment.c:1077 commands/comment.c:1087 commands/indexcmds.c:614 -#: commands/indexcmds.c:624 commands/opclasscmds.c:677 -#: commands/opclasscmds.c:687 commands/opclasscmds.c:822 -#: commands/opclasscmds.c:833 commands/opclasscmds.c:922 -#: commands/opclasscmds.c:932 -#, c-format -msgid "operator class \"%s\" does not exist for access method \"%s\"" -msgstr "" - -# commands/comment.c:1192 commands/functioncmds.c:908 -# commands/functioncmds.c:1156 -#: commands/comment.c:1192 commands/functioncmds.c:908 -#: commands/functioncmds.c:1156 -#, c-format -msgid "source data type %s does not exist" -msgstr "來源資料型別 %s 不存在" - -# commands/comment.c:1199 commands/functioncmds.c:915 -# commands/functioncmds.c:1163 -#: commands/comment.c:1199 commands/functioncmds.c:915 -#: commands/functioncmds.c:1163 -#, c-format -msgid "target data type %s does not exist" -msgstr "目標資料型別 %s 不存在" - -# commands/comment.c:1209 commands/functioncmds.c:1173 -#: commands/comment.c:1209 commands/functioncmds.c:1173 -#, c-format -msgid "cast from type %s to type %s does not exist" -msgstr "" - -# commands/comment.c:1221 commands/functioncmds.c:948 -# commands/functioncmds.c:1182 -#: commands/comment.c:1221 commands/functioncmds.c:948 -#: commands/functioncmds.c:1182 -#, c-format -msgid "must be owner of type %s or type %s" -msgstr "必須是型別 %s 或型別 %s 的擁有者" - -# commands/copy.c:720 commands/copy.c:728 commands/copy.c:736 -# commands/copy.c:744 commands/copy.c:752 commands/copy.c:760 -# commands/copy.c:768 commands/copy.c:776 commands/copy.c:784 -# commands/dbcommands.c:107 commands/dbcommands.c:115 -# commands/dbcommands.c:123 commands/dbcommands.c:131 -# commands/functioncmds.c:228 commands/functioncmds.c:236 -# commands/functioncmds.c:244 commands/functioncmds.c:252 -# commands/functioncmds.c:260 commands/sequence.c:903 commands/sequence.c:916 -# commands/sequence.c:924 commands/sequence.c:932 commands/sequence.c:940 -# commands/sequence.c:948 commands/user.c:576 commands/user.c:588 -# commands/user.c:596 commands/user.c:604 commands/user.c:612 -# commands/user.c:620 commands/user.c:826 commands/user.c:838 -# commands/user.c:846 commands/user.c:854 commands/user.c:1356 -# commands/user.c:1364 -#: commands/copy.c:720 commands/copy.c:728 commands/copy.c:736 -#: commands/copy.c:744 commands/copy.c:752 commands/copy.c:760 -#: commands/copy.c:768 commands/copy.c:776 commands/copy.c:784 -#: commands/dbcommands.c:108 commands/dbcommands.c:116 -#: commands/dbcommands.c:124 commands/dbcommands.c:132 -#: commands/functioncmds.c:228 commands/functioncmds.c:236 -#: commands/functioncmds.c:244 commands/functioncmds.c:252 -#: commands/functioncmds.c:260 commands/sequence.c:896 commands/sequence.c:909 -#: commands/sequence.c:917 commands/sequence.c:925 commands/sequence.c:933 -#: commands/sequence.c:941 commands/user.c:576 commands/user.c:588 -#: commands/user.c:596 commands/user.c:604 commands/user.c:612 -#: commands/user.c:620 commands/user.c:826 commands/user.c:838 -#: commands/user.c:846 commands/user.c:854 commands/user.c:1356 -#: commands/user.c:1364 -msgid "conflicting or redundant options" -msgstr "選項衝突或重覆" - -# commands/dbcommands.c:138 -#: commands/dbcommands.c:139 -msgid "LOCATION is not supported anymore" -msgstr "LOCATION已不被支援" - -# commands/dbcommands.c:139 -#: commands/dbcommands.c:140 -msgid "Consider using tablespaces instead." -msgstr "請考慮改用taplespace。" - -# commands/dbcommands.c:162 -#: commands/dbcommands.c:163 -#, c-format -msgid "%d is not a valid encoding code" -msgstr "%d 不是有效的編碼代碼" - -# commands/dbcommands.c:171 -#: commands/dbcommands.c:172 -#, c-format -msgid "%s is not a valid encoding name" -msgstr "%s 不是有效的編碼名稱" - -# commands/dbcommands.c:192 -#: commands/dbcommands.c:193 -msgid "permission denied to create database" -msgstr "建立資料庫被拒" - -# commands/dbcommands.c:201 -#: commands/dbcommands.c:202 -msgid "must be superuser to create database for another user" -msgstr "只有管理者能為其他使用者建立資料庫" - -# commands/dbcommands.c:215 commands/dbcommands.c:429 -# commands/dbcommands.c:678 -#: commands/dbcommands.c:216 commands/dbcommands.c:458 -#: commands/dbcommands.c:712 -#, c-format -msgid "database \"%s\" already exists" -msgstr "資料庫\"%s\"已經存在" - -# commands/dbcommands.c:228 -#: commands/dbcommands.c:229 -#, c-format -msgid "template database \"%s\" does not exist" -msgstr "範本資料庫\"%s\"不存在" - -# commands/dbcommands.c:239 -#: commands/dbcommands.c:240 -#, c-format -msgid "permission denied to copy database \"%s\"" -msgstr "複製資料庫\"%s\"被拒" - -# commands/dbcommands.c:252 -#: commands/dbcommands.c:253 -#, c-format -msgid "source database \"%s\" is being accessed by other users" -msgstr "來源資料庫\"%s\"正在被其他使用者存取" - -# commands/dbcommands.c:263 -#: commands/dbcommands.c:264 -#, c-format -msgid "invalid server encoding %d" -msgstr "不合法的伺服器編碼 %d" - -# commands/tablespace.c:227 -#: commands/dbcommands.c:310 -#, c-format -msgid "cannot assign new default tablespace \"%s\"" -msgstr "無法指定新的預設tablespace \"%s\"" - -#: commands/dbcommands.c:312 -#, c-format -msgid "" -"There is a conflict because database \"%s\" already has some tables in this " -"tablespace." -msgstr "" - -# commands/dbcommands.c:354 commands/dbcommands.c:375 -# commands/dbcommands.c:385 commands/dbcommands.c:1161 -# commands/dbcommands.c:1169 -#: commands/dbcommands.c:382 commands/dbcommands.c:404 -#: commands/dbcommands.c:414 commands/dbcommands.c:1226 -#: commands/dbcommands.c:1234 -msgid "could not initialize database directory" -msgstr "無法初始化資料庫目錄" - -# commands/dbcommands.c:355 -#: commands/dbcommands.c:383 -#, c-format -msgid "Directory \"%s\" already exists." -msgstr "目錄\"%s\"已經存在。" - -# commands/dbcommands.c:376 commands/dbcommands.c:1162 -#: commands/dbcommands.c:405 commands/dbcommands.c:1227 -#, c-format -msgid "Failing system command was: %s" -msgstr "失敗的系統命令是：%s" - -# commands/dbcommands.c:377 commands/dbcommands.c:1163 -#: commands/dbcommands.c:406 commands/dbcommands.c:1228 -msgid "Look in the postmaster's stderr log for more information." -msgstr "請檢查postmaster的stderr記錄取得更多資訊。" - -# commands/dbcommands.c:504 -#: commands/dbcommands.c:533 -msgid "cannot drop the currently open database" -msgstr "無法刪除目前正在開啟的資料庫" - -# commands/dbcommands.c:535 -#: commands/dbcommands.c:564 -msgid "cannot drop a template database" -msgstr "無法刪資範本資料庫" - -# commands/dbcommands.c:543 commands/dbcommands.c:665 -#: commands/dbcommands.c:572 commands/dbcommands.c:699 -#, c-format -msgid "database \"%s\" is being accessed by other users" -msgstr "資料庫\"%s\"正在被其他使用者存取" - -# commands/dbcommands.c:656 -#: commands/dbcommands.c:690 -msgid "current database may not be renamed" -msgstr "無法變更目前資料庫名稱" - -# commands/dbcommands.c:690 -#: commands/dbcommands.c:724 -msgid "permission denied to rename database" -msgstr "重新命名資料庫被拒" - -# commands/dbcommands.c:998 commands/dbcommands.c:1135 -# commands/dbcommands.c:1185 -#: commands/dbcommands.c:1063 commands/dbcommands.c:1200 -#: commands/dbcommands.c:1250 -#, c-format -msgid "could not remove database directory \"%s\"" -msgstr "無法刪除資料庫目錄\"%s\"" - -# commands/copy.c:204 commands/copy.c:216 commands/copy.c:249 -# commands/copy.c:259 -#: commands/copy.c:204 commands/copy.c:216 commands/copy.c:249 -#: commands/copy.c:259 -msgid "COPY BINARY is not supported to stdout or from stdin" -msgstr "" - -# commands/copy.c:312 -#: commands/copy.c:312 -#, c-format -msgid "could not write to COPY file: %m" -msgstr "無法寫入COPY檔：%m" - -# commands/copy.c:320 -#: commands/copy.c:320 -msgid "connection lost during COPY to stdout" -msgstr "COPY到標準輸出時失去連線" - -# commands/copy.c:403 commands/copy.c:421 commands/copy.c:425 -# commands/copy.c:486 commands/copy.c:535 tcop/fastpath.c:291 -# tcop/postgres.c:284 tcop/postgres.c:307 -#: commands/copy.c:403 commands/copy.c:421 commands/copy.c:425 -#: commands/copy.c:486 commands/copy.c:535 tcop/fastpath.c:291 -#: tcop/postgres.c:287 tcop/postgres.c:310 -msgid "unexpected EOF on client connection" -msgstr "用戶端連線出現非預期EOF" - -# commands/copy.c:437 -#: commands/copy.c:437 -#, c-format -msgid "COPY from stdin failed: %s" -msgstr "從標準輸入COPY失敗：%s" - -# commands/copy.c:453 -#: commands/copy.c:453 -#, c-format -msgid "unexpected message type 0x%02X during COPY from stdin" -msgstr "" - -# commands/copy.c:795 -#: commands/copy.c:795 -msgid "cannot specify DELIMITER in BINARY mode" -msgstr "不行在BINARY模式指定DELIMITER" - -# commands/copy.c:800 -#: commands/copy.c:800 -msgid "cannot specify CSV in BINARY mode" -msgstr "不行在BINARY模式指定CSV" - -# commands/copy.c:805 -#: commands/copy.c:805 -msgid "cannot specify NULL in BINARY mode" -msgstr "不行在BINARY模式指定NULL" - -# commands/copy.c:828 -#: commands/copy.c:828 -msgid "COPY delimiter must be a single character" -msgstr "COPY分隔字元只能有一個字" - -# commands/copy.c:836 -#: commands/copy.c:836 -msgid "COPY quote available only in CSV mode" -msgstr "" - -# commands/copy.c:841 -#: commands/copy.c:841 -msgid "COPY quote must be a single character" -msgstr "" - -# commands/copy.c:849 -#: commands/copy.c:849 -msgid "COPY escape available only in CSV mode" -msgstr "" - -# commands/copy.c:854 -#: commands/copy.c:854 -msgid "COPY escape must be a single character" -msgstr "" - -# commands/copy.c:862 -#: commands/copy.c:862 -msgid "COPY force quote available only in CSV mode" -msgstr "" - -# commands/copy.c:866 -#: commands/copy.c:866 -msgid "COPY force quote only available using COPY TO" -msgstr "" - -# commands/copy.c:874 -#: commands/copy.c:874 -msgid "COPY force not null available only in CSV mode" -msgstr "" - -# commands/copy.c:878 -#: commands/copy.c:878 -msgid "COPY force not null only available using COPY FROM" -msgstr "" - -# commands/copy.c:886 -#: commands/copy.c:886 -msgid "COPY delimiter must not appear in the NULL specification" -msgstr "" - -# commands/copy.c:894 -#: commands/copy.c:894 -msgid "CSV quote character must not appear in the NULL specification" -msgstr "" - -# commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323 -#: commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323 -msgid "transaction is read-only" -msgstr "唯讀交易" - -# commands/copy.c:916 -#: commands/copy.c:916 -msgid "must be superuser to COPY to or from a file" -msgstr "" - -# commands/copy.c:917 -#: commands/copy.c:917 -msgid "" -"Anyone can COPY to stdout or from stdin. psql's \\copy command also works " -"for anyone." -msgstr "" - -# commands/copy.c:926 -#: commands/copy.c:926 -#, c-format -msgid "table \"%s\" does not have OIDs" -msgstr "資料表\"%s\"沒有OID" - -# commands/copy.c:952 -#: commands/copy.c:952 -#, c-format -msgid "FORCE QUOTE column \"%s\" not referenced by COPY" -msgstr "" - -# commands/copy.c:975 -#: commands/copy.c:975 -#, c-format -msgid "FORCE NOT NULL column \"%s\" not referenced by COPY" -msgstr "" - -# commands/copy.c:1002 -#: commands/copy.c:1002 -#, c-format -msgid "cannot copy to view \"%s\"" -msgstr "無法複製到view \"%s\"" - -# commands/copy.c:1007 -#: commands/copy.c:1007 -#, c-format -msgid "cannot copy to sequence \"%s\"" -msgstr "無法複製到sequence \"%s\"" - -# commands/copy.c:1012 -#: commands/copy.c:1012 -#, c-format -msgid "cannot copy to non-table relation \"%s\"" -msgstr "無法複製到非資料表relation \"%s\"" - -# commands/copy.c:1031 -#: commands/copy.c:1031 -#, c-format -msgid "could not open file \"%s\" for reading: %m" -msgstr "無法開啟檔案\"%s\"以讀取：%m" - -# commands/copy.c:1040 commands/copy.c:1103 -#: commands/copy.c:1040 commands/copy.c:1103 -#, c-format -msgid "\"%s\" is a directory" -msgstr "\"%s\"是一個目錄" - -# commands/copy.c:1053 -#: commands/copy.c:1053 -#, c-format -msgid "cannot copy from view \"%s\"" -msgstr "無法從view \"%s\"複製" - -# commands/copy.c:1058 -#: commands/copy.c:1058 -#, c-format -msgid "cannot copy from sequence \"%s\"" -msgstr "無法從sequence \"%s\"複製" - -# commands/copy.c:1063 -#: commands/copy.c:1063 -#, c-format -msgid "cannot copy from non-table relation \"%s\"" -msgstr "無法從非資料表relation \"%s\"複製" - -# commands/copy.c:1085 -#: commands/copy.c:1085 -msgid "relative path not allowed for COPY to file" -msgstr "COPY至檔案不允許相對路徑" - -# commands/copy.c:1094 -#: commands/copy.c:1094 -#, c-format -msgid "could not open file \"%s\" for writing: %m" -msgstr "無法開啟檔案\"%s\"以寫入：%m" - -# commands/copy.c:1386 -#: commands/copy.c:1386 -#, c-format -msgid "COPY %s, line %d, column %s" -msgstr "" - -# commands/copy.c:1389 -#: commands/copy.c:1389 commands/copy.c:1422 -#, c-format -msgid "COPY %s, line %d" -msgstr "" - -# commands/copy.c:1397 -#: commands/copy.c:1397 -#, c-format -msgid "COPY %s, line %d, column %s: \"%s\"" -msgstr "" - -# commands/copy.c:1424 -#: commands/copy.c:1408 -#, c-format -msgid "COPY %s, line %d: \"%s\"" -msgstr "" - -# commands/copy.c:1637 -#: commands/copy.c:1634 -msgid "COPY file signature not recognized" -msgstr "" - -# commands/copy.c:1643 -#: commands/copy.c:1640 -msgid "invalid COPY file header (missing flags)" -msgstr "無效的COPY檔案header(缺少旗標)" - -# commands/copy.c:1649 -#: commands/copy.c:1646 -msgid "unrecognized critical flags in COPY file header" -msgstr "" - -# commands/copy.c:1655 -#: commands/copy.c:1652 -msgid "invalid COPY file header (missing length)" -msgstr "無效的COPY檔案header(缺少長度)" - -# commands/copy.c:1663 -#: commands/copy.c:1660 -msgid "invalid COPY file header (wrong length)" -msgstr "無效的COPY檔案header(長度不正確)" - -# commands/copy.c:1742 -#: commands/copy.c:1739 -msgid "null OID in COPY data" -msgstr "COPY資料中有空OID" - -# commands/copy.c:1751 commands/copy.c:1848 -#: commands/copy.c:1748 commands/copy.c:1845 -msgid "invalid OID in COPY data" -msgstr "COPY資料中有無效的OID" - -# commands/copy.c:1771 -#: commands/copy.c:1768 -#, c-format -msgid "missing data for column \"%s\"" -msgstr "欄位\"%s\"缺少資料" - -# commands/copy.c:1781 -#: commands/copy.c:1778 -msgid "unterminated CSV quoted field" -msgstr "" - -# commands/copy.c:1816 -#: commands/copy.c:1813 -msgid "extra data after last expected column" -msgstr "" - -# commands/copy.c:1834 -#: commands/copy.c:1831 -#, c-format -msgid "row field count is %d, expected %d" -msgstr "" - -# commands/copy.c:2056 commands/copy.c:2074 -#: commands/copy.c:2053 commands/copy.c:2071 -msgid "literal carriage return found in data" -msgstr "資料裡含有歸位(carriage return)實量" - -# commands/copy.c:2057 commands/copy.c:2075 -#: commands/copy.c:2054 commands/copy.c:2072 -msgid "Use \"\\r\" to represent carriage return." -msgstr "使用 \"\\r\" 表示歸位(carriage return)。" - -# commands/copy.c:2092 -#: commands/copy.c:2089 -msgid "literal newline found in data" -msgstr "資料裡含有換行(newline)實量" - -# commands/copy.c:2093 -#: commands/copy.c:2090 -msgid "Use \"\\n\" to represent newline." -msgstr "使用 \"\\n\" 表示換行(newline)。" - -# commands/copy.c:2113 commands/copy.c:2129 -#: commands/copy.c:2110 commands/copy.c:2126 -msgid "end-of-copy marker does not match previous newline style" -msgstr "" - -# commands/copy.c:2117 commands/copy.c:2123 -#: commands/copy.c:2114 commands/copy.c:2120 -msgid "end-of-copy marker corrupt" -msgstr "" - -# commands/copy.c:2494 commands/copy.c:2516 -#: commands/copy.c:2485 commands/copy.c:2507 -msgid "unexpected EOF in COPY data" -msgstr "" - -# commands/copy.c:2503 -#: commands/copy.c:2494 -msgid "invalid field size" -msgstr "無效的field大小" - -# commands/copy.c:2530 -#: commands/copy.c:2521 -msgid "incorrect binary data format" -msgstr "不正確的binary資料格式" - -# commands/copy.c:2716 parser/parse_target.c:648 parser/parse_target.c:658 -#: commands/copy.c:2707 parser/parse_target.c:650 parser/parse_target.c:660 -#, c-format -msgid "column \"%s\" specified more than once" -msgstr "欄位\"%s\"被指定多次" - -# commands/functioncmds.c:84 -#: commands/functioncmds.c:84 -#, c-format -msgid "SQL function cannot return shell type %s" -msgstr "SQL函式不能傳回shell型別 %s" - -# commands/functioncmds.c:89 -#: commands/functioncmds.c:89 -#, c-format -msgid "return type %s is only a shell" -msgstr "傳回型別 %s 只是一個shell" - -# commands/functioncmds.c:115 -#: commands/functioncmds.c:115 -#, c-format -msgid "type \"%s\" is not yet defined" -msgstr "型別\"%s\"尚未被定義" - -# commands/functioncmds.c:116 -#: commands/functioncmds.c:116 -msgid "Creating a shell type definition." -msgstr "建立shell型別定義。" - -# commands/functioncmds.c:166 -#: commands/functioncmds.c:166 -#, c-format -msgid "SQL function cannot accept shell type %s" -msgstr "SQL函式不接受shell型別 %s" - -# commands/functioncmds.c:171 -#: commands/functioncmds.c:171 -#, c-format -msgid "argument type %s is only a shell" -msgstr "引數型別 %s 只是一個shell" - -# commands/functioncmds.c:179 parser/parse_oper.c:113 parser/parse_oper.c:124 -#: commands/functioncmds.c:179 parser/parse_oper.c:113 parser/parse_oper.c:124 -#, c-format -msgid "type %s does not exist" -msgstr "%s型別不存在" - -# commands/functioncmds.c:186 -#: commands/functioncmds.c:186 -msgid "functions cannot accept set arguments" -msgstr "函式不接受set引數" - -# commands/functioncmds.c:273 -#: commands/functioncmds.c:273 -msgid "no function body specified" -msgstr "" - -# commands/functioncmds.c:280 -#: commands/functioncmds.c:280 -msgid "no language specified" -msgstr "未指定語言" - -# commands/functioncmds.c:342 -#: commands/functioncmds.c:342 -#, c-format -msgid "unrecognized function attribute \"%s\" ignored" -msgstr "" - -# commands/functioncmds.c:386 -#: commands/functioncmds.c:386 -#, c-format -msgid "only one AS item needed for language \"%s\"" -msgstr "" - -# commands/functioncmds.c:458 -#: commands/functioncmds.c:458 -msgid "You need to use \"createlang\" to load the language into the database." -msgstr "" - -# commands/functioncmds.c:578 commands/functioncmds.c:684 -# commands/functioncmds.c:751 -#: commands/functioncmds.c:578 commands/functioncmds.c:684 -#: commands/functioncmds.c:751 -#, c-format -msgid "\"%s\" is an aggregate function" -msgstr "\"%s\"是一個aggregate function" - -# commands/functioncmds.c:580 -#: commands/functioncmds.c:580 -msgid "Use DROP AGGREGATE to drop aggregate functions." -msgstr "使用DROP AGGREGATE刪除aggregate functions。" - -# commands/functioncmds.c:587 -#: commands/functioncmds.c:587 -#, c-format -msgid "removing built-in function \"%s\"" -msgstr "刪除內建函式\"%s\"" - -# commands/functioncmds.c:686 -#: commands/functioncmds.c:686 -msgid "Use ALTER AGGREGATE to rename aggregate functions." -msgstr "使用ALTER AGGREGATE重新命名aggregate functions。" - -# commands/functioncmds.c:753 -#: commands/functioncmds.c:753 -msgid "Use ALTER AGGREGATE to change owner of aggregate functions." -msgstr "使用ALTER AGGREGATE改變aggregate functions的擁有者。" - -# commands/functioncmds.c:922 -#: commands/functioncmds.c:922 -#, c-format -msgid "source data type %s is only a shell" -msgstr "來源資料型別 %s 只是一個shell" - -# commands/functioncmds.c:928 -#: commands/functioncmds.c:928 -#, c-format -msgid "target data type %s is only a shell" -msgstr "目標資料型別 %s 只是一個shell" - -# commands/functioncmds.c:934 -#: commands/functioncmds.c:934 -#, c-format -msgid "source data type %s is a pseudo-type" -msgstr "" - -# commands/functioncmds.c:940 -#: commands/functioncmds.c:940 -#, c-format -msgid "target data type %s is a pseudo-type" -msgstr "" - -# commands/functioncmds.c:971 -#: commands/functioncmds.c:971 -msgid "cast function must take one to three arguments" -msgstr "" - -# commands/functioncmds.c:975 -#: commands/functioncmds.c:975 -msgid "argument of cast function must match source data type" -msgstr "" - -# commands/functioncmds.c:979 -#: commands/functioncmds.c:979 -msgid "second argument of cast function must be type integer" -msgstr "" - -# commands/functioncmds.c:983 -#: commands/functioncmds.c:983 -msgid "third argument of cast function must be type boolean" -msgstr "" - -# commands/functioncmds.c:987 -#: commands/functioncmds.c:987 -msgid "return data type of cast function must match target data type" -msgstr "" - -# commands/functioncmds.c:998 -#: commands/functioncmds.c:998 -msgid "cast function must not be volatile" -msgstr "cast函式不能是volatile" - -# commands/functioncmds.c:1003 -#: commands/functioncmds.c:1003 -msgid "cast function must not be an aggregate function" -msgstr "cast函式不能是aggregate function" - -# commands/functioncmds.c:1007 -#: commands/functioncmds.c:1007 -msgid "cast function must not return a set" -msgstr "cast函式不能傳回set" - -# commands/functioncmds.c:1031 -#: commands/functioncmds.c:1031 -msgid "must be superuser to create a cast WITHOUT FUNCTION" -msgstr "" - -# commands/functioncmds.c:1046 -#: commands/functioncmds.c:1046 -msgid "source and target data types are not physically compatible" -msgstr "" - -# commands/functioncmds.c:1056 -#: commands/functioncmds.c:1056 -msgid "source data type and target data type are the same" -msgstr "" - -# commands/functioncmds.c:1090 -#: commands/functioncmds.c:1090 -#, c-format -msgid "cast from type %s to type %s already exists" -msgstr "" - -# commands/define.c:66 commands/define.c:183 commands/define.c:215 -# commands/define.c:249 -#: commands/define.c:66 commands/define.c:183 commands/define.c:215 -#: commands/define.c:249 -#, c-format -msgid "%s requires a parameter" -msgstr "%s需要一個參數" - -# commands/define.c:105 commands/define.c:116 commands/define.c:150 -# commands/define.c:168 -#: commands/define.c:105 commands/define.c:116 commands/define.c:150 -#: commands/define.c:168 -#, c-format -msgid "%s requires a numeric value" -msgstr "%s需要一個numeric值" - -# commands/define.c:136 -#: commands/define.c:136 -#, c-format -msgid "%s does not take a parameter" -msgstr "%s不需要參數" - -# commands/define.c:197 -#: commands/define.c:197 -#, c-format -msgid "argument of %s must be a name" -msgstr "%s的引數必需是名稱" - -# commands/define.c:233 -#: commands/define.c:233 -#, c-format -msgid "argument of %s must be a type name" -msgstr "%s的引數必需是型別名稱" - -# commands/define.c:258 -#: commands/define.c:258 -#, c-format -msgid "%s requires an integer value" -msgstr "%s需要一個整數" - -# commands/define.c:279 -#: commands/define.c:279 -#, c-format -msgid "invalid argument for %s: \"%s\"" -msgstr "給 %s 的引數不合法：\"%s\"" - -# commands/opclasscmds.c:129 -#: commands/opclasscmds.c:129 -msgid "must be superuser to create an operator class" -msgstr "只有管理者能建立operator class" - -# commands/opclasscmds.c:166 -#: commands/opclasscmds.c:166 -#, c-format -msgid "invalid operator number %d, must be between 1 and %d" -msgstr "" - -# commands/opclasscmds.c:204 -#: commands/opclasscmds.c:204 -#, c-format -msgid "invalid procedure number %d, must be between 1 and %d" -msgstr "" - -# commands/opclasscmds.c:226 -#: commands/opclasscmds.c:226 -msgid "storage type specified more than once" -msgstr "" - -# commands/opclasscmds.c:253 -#: commands/opclasscmds.c:253 -#, c-format -msgid "" -"storage type may not be different from data type for access method \"%s\"" -msgstr "" - -# commands/opclasscmds.c:271 -#: commands/opclasscmds.c:271 -#, c-format -msgid "operator class \"%s\" for access method \"%s\" already exists" -msgstr "" - -# commands/opclasscmds.c:300 -#: commands/opclasscmds.c:300 -#, c-format -msgid "could not make operator class \"%s\" be default for type %s" -msgstr "" - -# commands/opclasscmds.c:303 -#: commands/opclasscmds.c:303 -#, c-format -msgid "Operator class \"%s\" already is the default." -msgstr "operator class \"%s\"已經是預設的。" - -# commands/opclasscmds.c:430 -#: commands/opclasscmds.c:430 -msgid "btree operators must be binary" -msgstr "btree operators必須是binary" - -# commands/opclasscmds.c:434 -#: commands/opclasscmds.c:434 -msgid "btree operators must return boolean" -msgstr "btree operators必須傳回boolean" - -# commands/opclasscmds.c:438 -#: commands/opclasscmds.c:438 -msgid "btree operators must have index type as left input" -msgstr "" - -# commands/opclasscmds.c:484 -#: commands/opclasscmds.c:484 -msgid "btree procedures must have two arguments" -msgstr "" - -# commands/opclasscmds.c:488 -#: commands/opclasscmds.c:488 -msgid "btree procedures must return integer" -msgstr "" - -# commands/opclasscmds.c:492 -#: commands/opclasscmds.c:492 -msgid "btree procedures must have index type as first input" -msgstr "" - -# commands/opclasscmds.c:525 -#: commands/opclasscmds.c:525 -#, c-format -msgid "procedure number %d appears more than once" -msgstr "" - -# commands/opclasscmds.c:530 -#: commands/opclasscmds.c:530 -#, c-format -msgid "operator number %d appears more than once" -msgstr "" - -# commands/opclasscmds.c:854 -#: commands/opclasscmds.c:854 -#, c-format -msgid "" -"operator class \"%s\" for access method \"%s\" already exists in schema \"%s" -"\"" -msgstr "" - -# commands/indexcmds.c:119 -#: commands/indexcmds.c:120 -msgid "must specify at least one column" -msgstr "至少需要指定一個欄位" - -# commands/indexcmds.c:123 -#: commands/indexcmds.c:124 -#, c-format -msgid "cannot use more than %d columns in an index" -msgstr "索引中不能使用超過 %d 個欄位" - -# commands/indexcmds.c:224 -#: commands/indexcmds.c:238 -#, c-format -msgid "access method \"%s\" does not support unique indexes" -msgstr "" - -# commands/indexcmds.c:229 -#: commands/indexcmds.c:243 -#, c-format -msgid "access method \"%s\" does not support multicolumn indexes" -msgstr "" - -# commands/indexcmds.c:243 -#: commands/indexcmds.c:257 -msgid "" -"index expressions and predicates may refer only to the table being indexed" -msgstr "" - -# commands/indexcmds.c:271 parser/analyze.c:1185 -#: commands/indexcmds.c:285 parser/analyze.c:1197 -#, c-format -msgid "multiple primary keys for table \"%s\" are not allowed" -msgstr "資料表\"%s\"不允許多個主鍵" - -# commands/indexcmds.c:288 -#: commands/indexcmds.c:302 -msgid "primary keys cannot be expressions" -msgstr "主鍵不能是expressions" - -# commands/indexcmds.c:318 commands/indexcmds.c:456 parser/analyze.c:1299 -#: commands/indexcmds.c:332 commands/indexcmds.c:470 parser/analyze.c:1311 -#, c-format -msgid "column \"%s\" named in key does not exist" -msgstr "" - -# commands/indexcmds.c:363 -#: commands/indexcmds.c:377 -#, c-format -msgid "%s %s will create implicit index \"%s\" for table \"%s\"" -msgstr "" - -# commands/indexcmds.c:406 -#: commands/indexcmds.c:420 -msgid "cannot use subquery in index predicate" -msgstr "" - -# commands/indexcmds.c:410 -#: commands/indexcmds.c:424 -msgid "cannot use aggregate in index predicate" -msgstr "" - -# commands/indexcmds.c:419 -#: commands/indexcmds.c:433 -msgid "functions in index predicate must be marked IMMUTABLE" -msgstr "" - -# commands/indexcmds.c:461 commands/tablecmds.c:1299 parser/parse_expr.c:1084 -#: commands/indexcmds.c:475 commands/tablecmds.c:1329 parser/parse_expr.c:1084 -#, c-format -msgid "column \"%s\" does not exist" -msgstr "欄位\"%s\"不存在" - -# commands/indexcmds.c:494 -#: commands/indexcmds.c:508 -msgid "cannot use subquery in index expression" -msgstr "" - -# commands/indexcmds.c:498 -#: commands/indexcmds.c:512 -msgid "cannot use aggregate function in index expression" -msgstr "" - -# commands/indexcmds.c:509 -#: commands/indexcmds.c:523 -msgid "functions in index expression must be marked IMMUTABLE" -msgstr "" - -# commands/indexcmds.c:568 -#: commands/indexcmds.c:582 -#, c-format -msgid "data type %s has no default operator class for access method \"%s\"" -msgstr "" - -# commands/indexcmds.c:570 -#: commands/indexcmds.c:584 -msgid "" -"You must specify an operator class for the index or define a default " -"operator class for the data type." -msgstr "" - -# commands/indexcmds.c:623 -#: commands/indexcmds.c:637 -#, c-format -msgid "operator class \"%s\" does not accept data type %s" -msgstr "" - -# commands/indexcmds.c:680 utils/cache/typcache.c:369 -#: commands/indexcmds.c:694 utils/cache/typcache.c:369 -#, c-format -msgid "there are multiple default operator classes for data type %s" -msgstr "" - -# commands/indexcmds.c:949 -#: commands/indexcmds.c:963 -#, c-format -msgid "shared table \"%s\" can only be reindexed in stand-alone mode" -msgstr "" - -# commands/indexcmds.c:956 -#: commands/indexcmds.c:970 -#, c-format -msgid "table \"%s\" has no indexes" -msgstr "資料表\"%s\"沒有索引" - -# commands/indexcmds.c:984 -#: commands/indexcmds.c:998 -msgid "can only reindex the currently open database" -msgstr "只能重新索引目前開啟的資料庫" - -# commands/indexcmds.c:1067 -#: commands/indexcmds.c:1081 -#, c-format -msgid "table \"%s\" was reindexed" -msgstr "資料表\"%s\"已重新索引" - -# commands/prepare.c:61 -#: commands/prepare.c:61 -msgid "invalid statement name: must not be empty" -msgstr "" - -# commands/prepare.c:80 -#: commands/prepare.c:80 -msgid "utility statements cannot be prepared" -msgstr "" - -# commands/prepare.c:168 commands/prepare.c:173 commands/prepare.c:538 -#: commands/prepare.c:168 commands/prepare.c:173 commands/prepare.c:535 -msgid "prepared statement is not a SELECT" -msgstr "" - -# commands/prepare.c:310 -#: commands/prepare.c:307 -#, c-format -msgid "prepared statement \"%s\" already exists" -msgstr "" - -# commands/prepare.c:390 -#: commands/prepare.c:387 -#, c-format -msgid "prepared statement \"%s\" does not exist" -msgstr "" - -# commands/operatorcmds.c:107 commands/operatorcmds.c:115 -#: commands/operatorcmds.c:107 commands/operatorcmds.c:115 -msgid "setof type not allowed for operator argument" -msgstr "" - -# commands/operatorcmds.c:142 -#: commands/operatorcmds.c:142 -#, c-format -msgid "operator attribute \"%s\" not recognized" -msgstr "" - -# commands/operatorcmds.c:152 -#: commands/operatorcmds.c:152 -msgid "operator procedure must be specified" -msgstr "" - -# commands/portalcmds.c:54 commands/portalcmds.c:174 -# commands/portalcmds.c:219 -#: commands/portalcmds.c:54 commands/portalcmds.c:183 -#: commands/portalcmds.c:228 -msgid "invalid cursor name: must not be empty" -msgstr "無效的cursor名稱：不能是空的" - -# commands/portalcmds.c:80 -#: commands/portalcmds.c:89 -msgid "DECLARE CURSOR may not specify INTO" -msgstr "DECLARE CURSOR不能使用INTO" - -# commands/portalcmds.c:84 -#: commands/portalcmds.c:93 -msgid "DECLARE CURSOR ... FOR UPDATE is not supported" -msgstr "DECLARE CURSOR ... FOR UPDATE未被支援" - -# commands/portalcmds.c:85 -#: commands/portalcmds.c:94 -msgid "Cursors must be READ ONLY." -msgstr "cursors必須是READ ONLY。" - -# commands/portalcmds.c:182 commands/portalcmds.c:229 -#: commands/portalcmds.c:191 commands/portalcmds.c:238 -#, c-format -msgid "cursor \"%s\" does not exist" -msgstr "cursor \"%s\"不存在" - -# commands/portalcmds.c:337 tcop/pquery.c:523 tcop/pquery.c:1096 -#: commands/portalcmds.c:346 tcop/pquery.c:523 tcop/pquery.c:1096 -#, c-format -msgid "portal \"%s\" cannot be run" -msgstr "" - -# commands/portalcmds.c:395 -#: commands/portalcmds.c:404 -msgid "could not reposition held cursor" -msgstr "無法重新定位持有的cursor" - -# commands/tablecmds.c:294 -#: commands/tablecmds.c:294 -msgid "ON COMMIT can only be used on temporary tables" -msgstr "" - -# commands/tablecmds.c:396 -#: commands/tablecmds.c:399 -#, c-format -msgid "duplicate check constraint name \"%s\"" -msgstr "" - -# commands/tablecmds.c:552 commands/tablecmds.c:1244 -# commands/tablecmds.c:1450 commands/tablecmds.c:2606 -# commands/tablecmds.c:3768 commands/tablecmds.c:5376 commands/trigger.c:147 -# commands/trigger.c:552 tcop/utility.c:182 tcop/utility.c:217 -#: commands/tablecmds.c:555 commands/tablecmds.c:1274 -#: commands/tablecmds.c:1480 commands/tablecmds.c:2636 -#: commands/tablecmds.c:3798 commands/tablecmds.c:5427 commands/trigger.c:147 -#: commands/trigger.c:552 tcop/utility.c:182 tcop/utility.c:217 -#, c-format -msgid "permission denied: \"%s\" is a system catalog" -msgstr "權限不足: \"%s\" 是系統 catalog" - -# commands/tablecmds.c:563 -#: commands/tablecmds.c:566 -#, c-format -msgid "cannot truncate system relation \"%s\"" -msgstr "" - -# commands/tablecmds.c:573 -#: commands/tablecmds.c:576 -msgid "cannot truncate temporary tables of other sessions" -msgstr "" - -# commands/tablecmds.c:699 -#: commands/tablecmds.c:719 -#, c-format -msgid "column \"%s\" duplicated" -msgstr "欄位\"%s\"重覆" - -# commands/tablecmds.c:724 parser/analyze.c:1055 parser/analyze.c:1261 -#: commands/tablecmds.c:744 parser/analyze.c:1067 parser/analyze.c:1273 -#, c-format -msgid "inherited relation \"%s\" is not a table" -msgstr "" - -# commands/tablecmds.c:730 -#: commands/tablecmds.c:750 -#, c-format -msgid "cannot inherit from temporary relation \"%s\"" -msgstr "" - -# commands/tablecmds.c:747 -#: commands/tablecmds.c:767 -#, c-format -msgid "inherited relation \"%s\" duplicated" -msgstr "" - -# commands/tablecmds.c:801 -#: commands/tablecmds.c:821 -#, c-format -msgid "merging multiple inherited definitions of column \"%s\"" -msgstr "" - -# commands/tablecmds.c:808 -#: commands/tablecmds.c:828 -#, c-format -msgid "inherited column \"%s\" has a type conflict" -msgstr "" - -# commands/tablecmds.c:810 commands/tablecmds.c:955 parser/parse_coerce.c:239 -# parser/parse_coerce.c:1110 parser/parse_coerce.c:1127 -# parser/parse_coerce.c:1173 -#: commands/tablecmds.c:830 commands/tablecmds.c:975 parser/parse_coerce.c:239 -#: parser/parse_coerce.c:1125 parser/parse_coerce.c:1142 -#: parser/parse_coerce.c:1188 -#, c-format -msgid "%s versus %s" -msgstr "" - -# commands/tablecmds.c:946 -#: commands/tablecmds.c:966 -#, c-format -msgid "merging column \"%s\" with inherited definition" -msgstr "" - -# commands/tablecmds.c:953 -#: commands/tablecmds.c:973 -#, c-format -msgid "column \"%s\" has a type conflict" -msgstr "欄位\"%s\"發生型別衝突" - -# commands/tablecmds.c:994 -#: commands/tablecmds.c:1024 -#, c-format -msgid "column \"%s\" inherits conflicting default values" -msgstr "" - -# commands/tablecmds.c:996 -#: commands/tablecmds.c:1026 -msgid "To resolve the conflict, specify a default explicitly." -msgstr "" - -# commands/tablecmds.c:1289 -#: commands/tablecmds.c:1319 -#, c-format -msgid "inherited column \"%s\" must be renamed in child tables too" -msgstr "" - -# commands/tablecmds.c:1307 -#: commands/tablecmds.c:1337 -#, c-format -msgid "cannot rename system column \"%s\"" -msgstr "無法重新命名系統欄位\"%s\"" - -# commands/tablecmds.c:1317 -#: commands/tablecmds.c:1347 -#, c-format -msgid "cannot rename inherited column \"%s\"" -msgstr "無法重新命名被繼承的欄位\"%s\"" - -# commands/tablecmds.c:1328 commands/tablecmds.c:2889 -#: commands/tablecmds.c:1358 commands/tablecmds.c:2919 -#, c-format -msgid "column \"%s\" of relation \"%s\" already exists" -msgstr "" - -# commands/tablecmds.c:2189 -#: commands/tablecmds.c:2219 -#, c-format -msgid "cannot rewrite system relation \"%s\"" -msgstr "無法重寫系統relation \"%s\"" - -# commands/tablecmds.c:2199 -#: commands/tablecmds.c:2229 -msgid "cannot rewrite temporary tables of other sessions" -msgstr "無法重寫其它session的暫存資料表" - -# commands/tablecmds.c:2490 -#: commands/tablecmds.c:2520 -#, c-format -msgid "check constraint \"%s\" is violated by some row" -msgstr "有資料行違反check constraint \"%s\"" - -# commands/tablecmds.c:2503 -#: commands/tablecmds.c:2533 -#, c-format -msgid "column \"%s\" contains null values" -msgstr "欄位\"%s\"包含空值" - -# commands/tablecmds.c:2588 -#: commands/tablecmds.c:2618 -#, c-format -msgid "\"%s\" is not a table or view" -msgstr "\"%s\"不是資料表或view" - -# commands/tablecmds.c:2741 -#: commands/tablecmds.c:2771 -#, c-format -msgid "cannot alter table \"%s\" because column \"%s\".\"%s\" uses its rowtype" -msgstr "" - -# commands/tablecmds.c:2807 -#: commands/tablecmds.c:2837 -msgid "column must be added to child tables too" -msgstr "欄位也必須被加入子資料表" - -# commands/tablecmds.c:2850 -#: commands/tablecmds.c:2880 -#, c-format -msgid "child table \"%s\" has different type for column \"%s\"" -msgstr "子資料表\"%s\"的欄位\"%s\"有不同的型別" - -# commands/tablecmds.c:2862 -#: commands/tablecmds.c:2892 -#, c-format -msgid "merging definition of column \"%s\" for child \"%s\"" -msgstr "" - -# commands/tablecmds.c:3079 commands/tablecmds.c:3172 -# commands/tablecmds.c:3222 commands/tablecmds.c:3318 -# commands/tablecmds.c:3379 commands/tablecmds.c:4573 -#: commands/tablecmds.c:3109 commands/tablecmds.c:3202 -#: commands/tablecmds.c:3252 commands/tablecmds.c:3348 -#: commands/tablecmds.c:3409 commands/tablecmds.c:4617 -#, c-format -msgid "cannot alter system column \"%s\"" -msgstr "無法修改系統欄位\"%s\"" - -# commands/tablecmds.c:3115 -#: commands/tablecmds.c:3145 -#, c-format -msgid "column \"%s\" is in a primary key" -msgstr "欄位\"%s\"是主鍵" - -# commands/tablecmds.c:3265 commands/tablecmds.c:5365 -#: commands/tablecmds.c:3295 commands/tablecmds.c:5416 -#, c-format -msgid "\"%s\" is not a table or index" -msgstr "\"%s\"不是資料表或索引" - -# commands/tablecmds.c:3292 -#: commands/tablecmds.c:3322 -#, c-format -msgid "statistics target %d is too low" -msgstr "" - -# commands/tablecmds.c:3300 -#: commands/tablecmds.c:3330 -#, c-format -msgid "lowering statistics target to %d" -msgstr "" - -# commands/tablecmds.c:3360 -#: commands/tablecmds.c:3390 -#, c-format -msgid "invalid storage type \"%s\"" -msgstr "不合法的儲存型別\"%s\"" - -# commands/tablecmds.c:3391 -#: commands/tablecmds.c:3421 -#, c-format -msgid "column data type %s can only have storage PLAIN" -msgstr "" - -# commands/tablecmds.c:3448 -#: commands/tablecmds.c:3478 -#, c-format -msgid "cannot drop system column \"%s\"" -msgstr "無法刪除系統欄位\"%s\"" - -# commands/tablecmds.c:3455 -#: commands/tablecmds.c:3485 -#, c-format -msgid "cannot drop inherited column \"%s\"" -msgstr "無法刪除被繼承的欄位\"%s\"" - -# commands/tablecmds.c:3756 -#: commands/tablecmds.c:3786 -#, c-format -msgid "referenced relation \"%s\" is not a table" -msgstr "被參照的relation \"%s\"不是資料表" - -# commands/tablecmds.c:3790 -#: commands/tablecmds.c:3820 -msgid "cannot reference temporary table from permanent table constraint" -msgstr "" - -# commands/tablecmds.c:3797 -#: commands/tablecmds.c:3827 -msgid "cannot reference permanent table from temporary table constraint" -msgstr "" - -# commands/tablecmds.c:3842 commands/tablecmds.c:4330 -#: commands/tablecmds.c:3872 commands/tablecmds.c:4362 -msgid "number of referencing and referenced columns for foreign key disagree" -msgstr "" - -# commands/tablecmds.c:3863 -#: commands/tablecmds.c:3893 -#, c-format -msgid "foreign key constraint \"%s\" cannot be implemented" -msgstr "" - -# commands/tablecmds.c:3866 -#: commands/tablecmds.c:3896 -#, c-format -msgid "Key columns \"%s\" and \"%s\" are of incompatible types: %s and %s." -msgstr "" - -# commands/tablecmds.c:3880 -#: commands/tablecmds.c:3910 -#, c-format -msgid "foreign key constraint \"%s\" will require costly sequential scans" -msgstr "" - -# commands/tablecmds.c:3883 -#: commands/tablecmds.c:3913 -#, c-format -msgid "Key columns \"%s\" and \"%s\" are of different types: %s and %s." -msgstr "" - -# commands/tablecmds.c:3968 -#: commands/tablecmds.c:3998 -#, c-format -msgid "column \"%s\" referenced in foreign key constraint does not exist" -msgstr "" - -# commands/tablecmds.c:3973 -#: commands/tablecmds.c:4003 -#, c-format -msgid "cannot have more than %d keys in a foreign key" -msgstr "一個外鍵不能超過%d個欄位" - -# commands/tablecmds.c:4042 -#: commands/tablecmds.c:4072 -#, c-format -msgid "there is no primary key for referenced table \"%s\"" -msgstr "被參考的資料表\"%s\"沒有主鍵" - -# commands/tablecmds.c:4160 -#: commands/tablecmds.c:4190 -#, c-format -msgid "" -"there is no unique constraint matching given keys for referenced table \"%s\"" -msgstr "" - -# commands/tablecmds.c:4530 commands/trigger.c:2756 -#: commands/tablecmds.c:4574 commands/trigger.c:2777 -#, c-format -msgid "constraint \"%s\" does not exist" -msgstr "constraint \"%s\"不存在" - -# commands/tablecmds.c:4535 -#: commands/tablecmds.c:4579 -#, c-format -msgid "multiple constraints named \"%s\" were dropped" -msgstr "多個名稱為\"%s\"的constraints被刪除" - -# commands/tablecmds.c:4580 -#: commands/tablecmds.c:4624 -#, c-format -msgid "cannot alter inherited column \"%s\"" -msgstr "無法修改被繼承的欄位\"%s\"" - -# commands/tablecmds.c:4620 -#: commands/tablecmds.c:4664 -msgid "transform expression must not return a set" -msgstr "" - -# commands/tablecmds.c:4626 -#: commands/tablecmds.c:4670 -msgid "cannot use subquery in transform expression" -msgstr "" - -# commands/tablecmds.c:4630 -#: commands/tablecmds.c:4674 -msgid "cannot use aggregate function in transform expression" -msgstr "" - -# commands/tablecmds.c:4647 -#: commands/tablecmds.c:4691 -#, c-format -msgid "column \"%s\" cannot be cast to type \"%s\"" -msgstr "欄位\"%s\"無法被轉換為型別\"%s\"" - -# commands/tablecmds.c:4673 -#: commands/tablecmds.c:4717 -#, c-format -msgid "type of inherited column \"%s\" must be changed in child tables too" -msgstr "" - -# commands/tablecmds.c:4711 -#: commands/tablecmds.c:4755 -#, c-format -msgid "cannot alter type of column \"%s\" twice" -msgstr "無法修改欄位\"%s\"的型別兩次" - -# commands/tablecmds.c:4738 -#: commands/tablecmds.c:4789 -#, c-format -msgid "default for column \"%s\" cannot be cast to type \"%s\"" -msgstr "欄位\"%s\"的預設值不能轉型成\"%s\"" - -# commands/tablecmds.c:4838 -#: commands/tablecmds.c:4889 -msgid "cannot alter type of a column used by a view or rule" -msgstr "不能修改被view或rule使用的欄位" - -# commands/tablecmds.c:4839 -#: commands/tablecmds.c:4890 -#, c-format -msgid "%s depends on column \"%s\"" -msgstr "%s 依存於欄位\"%s\"" - -# commands/tablecmds.c:5155 -#: commands/tablecmds.c:5206 -#, c-format -msgid "\"%s\" is not a table, TOAST table, index, view, or sequence" -msgstr "\"%s\"不是資料表、TOAST資料表、索引、view或sequence" - -# commands/tablecmds.c:5395 -#: commands/tablecmds.c:5446 -msgid "cannot have multiple SET TABLESPACE subcommands" -msgstr "不允許多個SET TABLESPACE子命令" - -# commands/tablecmds.c:5425 -#: commands/tablecmds.c:5476 -#, c-format -msgid "cannot move system relation \"%s\"" -msgstr "無法搬移系統relation \"%s\"" - -# commands/tablecmds.c:5435 -#: commands/tablecmds.c:5486 -msgid "cannot move temporary tables of other sessions" -msgstr "無法替其它session搬移暫存資料表" - -# commands/tablecmds.c:5645 -#: commands/tablecmds.c:5696 -msgid "shared tables cannot be toasted after initdb" -msgstr "" - -# commands/tablecmds.c:5660 -#: commands/tablecmds.c:5711 -#, c-format -msgid "table \"%s\" already has a TOAST table" -msgstr "資料表\"%s\"已經有TOAST資料表" - -# commands/tablecmds.c:5677 -#: commands/tablecmds.c:5728 -#, c-format -msgid "table \"%s\" does not need a TOAST table" -msgstr "資料表\"%s\"不需要TOAST資料表" - -# commands/proclang.c:64 -#: commands/proclang.c:64 -msgid "must be superuser to create procedural language" -msgstr "只能管理者能建立程序語言" - -# commands/proclang.c:77 commands/proclang.c:265 -#: commands/proclang.c:77 commands/proclang.c:265 -#, c-format -msgid "language \"%s\" already exists" -msgstr "語言\"%s\"已經存在" - -# commands/proclang.c:97 -#: commands/proclang.c:97 -#, c-format -msgid "" -"changing return type of function %s from \"opaque\" to \"language_handler\"" -msgstr "將函式%s的傳回型別從\"opaque\"變更為\"language_handler\"" - -# commands/proclang.c:104 -#: commands/proclang.c:104 -#, c-format -msgid "function %s must return type \"language_handler\"" -msgstr "函式%s必須傳回型別\"language_handler\"" - -# commands/proclang.c:188 -#: commands/proclang.c:188 -msgid "must be superuser to drop procedural language" -msgstr "只有管理者能刪除程序語言" - -# commands/proclang.c:271 -#: commands/proclang.c:271 -msgid "must be superuser to rename procedural language" -msgstr "只有管理者能重新命名程序語言" - -# commands/schemacmds.c:86 commands/user.c:883 commands/user.c:1018 -#: commands/schemacmds.c:84 commands/user.c:883 commands/user.c:1018 -msgid "permission denied" -msgstr "權限不足" - -# commands/schemacmds.c:87 -#: commands/schemacmds.c:85 -#, c-format -msgid "\"%s\" is not a superuser, so cannot create a schema for \"%s\"" -msgstr "" - -# commands/schemacmds.c:102 commands/schemacmds.c:297 -#: commands/schemacmds.c:100 commands/schemacmds.c:268 -#, c-format -msgid "unacceptable schema name \"%s\"" -msgstr "" - -# commands/schemacmds.c:103 commands/schemacmds.c:298 -#: commands/schemacmds.c:101 commands/schemacmds.c:269 -msgid "The prefix \"pg_\" is reserved for system schemas." -msgstr "" - -# commands/sequence.c:403 commands/sequence.c:595 commands/sequence.c:638 -#: commands/sequence.c:399 commands/sequence.c:591 commands/sequence.c:634 -#, c-format -msgid "permission denied for sequence %s" -msgstr "" - -# commands/sequence.c:480 -#: commands/sequence.c:476 -#, c-format -msgid "nextval: reached maximum value of sequence \"%s\" (%s)" -msgstr "" - -# commands/sequence.c:503 -#: commands/sequence.c:499 -#, c-format -msgid "nextval: reached minimum value of sequence \"%s\" (%s)" -msgstr "" - -# commands/sequence.c:601 -#: commands/sequence.c:597 -#, c-format -msgid "currval of sequence \"%s\" is not yet defined in this session" -msgstr "" - -# commands/sequence.c:655 -#: commands/sequence.c:651 -#, c-format -msgid "setval: value %s is out of bounds for sequence \"%s\" (%s..%s)" -msgstr "" - -# commands/sequence.c:798 executor/execGrouping.c:328 -# executor/execGrouping.c:388 executor/nodeIndexscan.c:1051 lib/dllist.c:43 -# lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:1006 -# postmaster/pgstat.c:1023 postmaster/pgstat.c:2452 postmaster/pgstat.c:2527 -# postmaster/pgstat.c:2572 postmaster/pgstat.c:2623 -# postmaster/postmaster.c:755 postmaster/postmaster.c:1625 -# postmaster/postmaster.c:2344 storage/buffer/localbuf.c:139 -# storage/file/fd.c:587 storage/file/fd.c:620 storage/file/fd.c:766 -# storage/ipc/sinval.c:789 storage/lmgr/lock.c:497 storage/smgr/md.c:138 -# storage/smgr/md.c:848 storage/smgr/smgr.c:213 utils/adt/cash.c:297 -# utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 -# utils/adt/oracle_compat.c:124 utils/adt/regexp.c:191 -# utils/adt/ri_triggers.c:3471 utils/cache/relcache.c:164 -# utils/cache/relcache.c:178 utils/cache/relcache.c:1130 -# utils/cache/typcache.c:165 utils/cache/typcache.c:487 -# utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:521 utils/fmgr/fmgr.c:532 -# utils/init/miscinit.c:213 utils/init/miscinit.c:234 -# utils/init/miscinit.c:244 utils/misc/guc.c:1898 utils/misc/guc.c:1911 -# utils/misc/guc.c:1924 utils/mmgr/aset.c:337 utils/mmgr/aset.c:503 -# utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 utils/mmgr/portalmem.c:75 -#: commands/sequence.c:794 executor/execGrouping.c:384 lib/dllist.c:43 -#: lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:2432 -#: postmaster/pgstat.c:2499 postmaster/postmaster.c:809 -#: postmaster/postmaster.c:1679 postmaster/postmaster.c:2398 -#: storage/buffer/localbuf.c:139 storage/file/fd.c:587 storage/file/fd.c:620 -#: storage/file/fd.c:766 storage/ipc/sinval.c:789 storage/lmgr/lock.c:494 -#: storage/smgr/md.c:844 storage/smgr/smgr.c:213 utils/adt/cash.c:297 -#: utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 -#: utils/adt/oracle_compat.c:125 utils/adt/regexp.c:200 -#: utils/adt/ri_triggers.c:3472 utils/cache/relcache.c:169 -#: utils/cache/relcache.c:183 utils/cache/relcache.c:1135 -#: utils/cache/typcache.c:165 utils/cache/typcache.c:487 -#: utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:528 utils/hash/dynahash.c:178 -#: utils/hash/dynahash.c:248 utils/init/miscinit.c:213 -#: utils/init/miscinit.c:234 utils/init/miscinit.c:244 utils/misc/guc.c:1909 -#: utils/misc/guc.c:1922 utils/misc/guc.c:1935 utils/mmgr/aset.c:337 -#: utils/mmgr/aset.c:503 utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 -#: utils/mmgr/portalmem.c:78 -msgid "out of memory" -msgstr "記憶體用盡" - -# commands/sequence.c:963 -#: commands/sequence.c:956 -msgid "INCREMENT must not be zero" -msgstr "INCREMENT 不可為 0" - -# commands/sequence.c:1009 -#: commands/sequence.c:1002 -#, c-format -msgid "MINVALUE (%s) must be less than MAXVALUE (%s)" -msgstr "MINVALUE (%s) 必須小於 MAXVALUE (%s)" - -# commands/sequence.c:1040 -#: commands/sequence.c:1033 -#, c-format -msgid "START value (%s) can't be less than MINVALUE (%s)" -msgstr "START 值 (%s) 不可小於 MINVALUE (%s)" - -# commands/sequence.c:1052 -#: commands/sequence.c:1045 -#, c-format -msgid "START value (%s) can't be greater than MAXVALUE (%s)" -msgstr "START 值 (%s) 不可大於 MAXVALUE (%s)" - -# commands/sequence.c:1067 -#: commands/sequence.c:1060 -#, c-format -msgid "CACHE (%s) must be greater than zero" -msgstr "CACHE (%s) 必須大於 0" - -# commands/trigger.c:134 -#: commands/trigger.c:134 -#, c-format -msgid "could not determine referenced table for constraint \"%s\"" -msgstr "" - -# commands/trigger.c:219 -#: commands/trigger.c:219 -msgid "multiple INSERT events specified" -msgstr "" - -# commands/trigger.c:226 -#: commands/trigger.c:226 -msgid "multiple DELETE events specified" -msgstr "" - -# commands/trigger.c:233 -#: commands/trigger.c:233 -msgid "multiple UPDATE events specified" -msgstr "" - -# commands/trigger.c:266 commands/trigger.c:654 -#: commands/trigger.c:266 commands/trigger.c:654 -#, c-format -msgid "trigger \"%s\" for relation \"%s\" already exists" -msgstr "" - -# commands/trigger.c:287 -#: commands/trigger.c:287 -#, c-format -msgid "changing return type of function %s from \"opaque\" to \"trigger\"" -msgstr "" - -# commands/trigger.c:294 -#: commands/trigger.c:294 -#, c-format -msgid "function %s must return type \"trigger\"" -msgstr "函式 %s 必須傳回型別\"trigger\"" - -# commands/trigger.c:1160 -#: commands/trigger.c:1160 -#, c-format -msgid "trigger function %u returned null value" -msgstr "trigger函 %u 式傳回空值" - -# commands/trigger.c:1212 commands/trigger.c:1325 commands/trigger.c:1454 -#: commands/trigger.c:1214 commands/trigger.c:1331 commands/trigger.c:1464 -msgid "BEFORE STATEMENT trigger cannot return a value" -msgstr "" - -# commands/trigger.c:1581 executor/execMain.c:1151 executor/execMain.c:1457 -# executor/execMain.c:1598 -#: commands/trigger.c:1593 executor/execMain.c:1151 executor/execMain.c:1457 -#: executor/execMain.c:1598 -msgid "could not serialize access due to concurrent update" -msgstr "" - -# commands/trigger.c:2708 -#: commands/trigger.c:2723 -msgid "unnamed constraints cannot be set explicitly" -msgstr "" - -# commands/trigger.c:2741 -#: commands/trigger.c:2762 -#, c-format -msgid "constraint \"%s\" is not deferrable" -msgstr "" - -# commands/tablespace.c:154 commands/tablespace.c:162 -# commands/tablespace.c:168 -#: ../port/copydir.c:47 commands/tablespace.c:150 commands/tablespace.c:158 -#: commands/tablespace.c:164 -#, c-format -msgid "could not create directory \"%s\": %m" -msgstr "無法建立目錄\"%s\"：%m" - -# commands/tablespace.c:181 -#: commands/tablespace.c:177 -#, c-format -msgid "could not stat directory \"%s\": %m" -msgstr "" - -# commands/tablespace.c:190 -#: commands/tablespace.c:186 -#, c-format -msgid "\"%s\" exists but is not a directory" -msgstr "\"%s\"存在，但不是目錄" - -# commands/tablespace.c:227 -#: commands/tablespace.c:223 -#, c-format -msgid "permission denied to create tablespace \"%s\"" -msgstr "建立tablespace \"%s\"被拒" - -# commands/tablespace.c:229 -#: commands/tablespace.c:225 -msgid "Must be superuser to create a tablespace." -msgstr "只有管理者能建立tablespace。" - -# commands/tablespace.c:248 -#: commands/tablespace.c:244 -msgid "tablespace location may not contain single quotes" -msgstr "tablespace的位置不能包含單引號" - -# commands/tablespace.c:258 -#: commands/tablespace.c:254 -msgid "tablespace location must be an absolute path" -msgstr "tablespace的位置必須是絕對路徑" - -# commands/tablespace.c:268 -#: commands/tablespace.c:264 -#, c-format -msgid "tablespace location \"%s\" is too long" -msgstr "tablespace位置\"%s\"過長" - -# commands/tablespace.c:278 commands/tablespace.c:839 -#: commands/tablespace.c:274 commands/tablespace.c:766 -#, c-format -msgid "unacceptable tablespace name \"%s\"" -msgstr "無法接受tablespace名稱\"%s\"" - -# commands/tablespace.c:280 commands/tablespace.c:840 -#: commands/tablespace.c:276 commands/tablespace.c:767 -msgid "The prefix \"pg_\" is reserved for system tablespaces." -msgstr "前置字\"pg_\"被保留給系統tablespace。" - -# commands/tablespace.c:290 commands/tablespace.c:852 -#: commands/tablespace.c:286 commands/tablespace.c:779 -#, c-format -msgid "tablespace \"%s\" already exists" -msgstr "tablespace \"%s\"已經存在" - -# commands/tablespace.c:325 commands/tablespace.c:969 -#: commands/tablespace.c:321 commands/tablespace.c:1033 -#, c-format -msgid "could not set permissions on directory \"%s\": %m" -msgstr "無法設定目錄\"%s\"的權限：%m" - -# commands/tablespace.c:334 -#: commands/tablespace.c:330 -#, c-format -msgid "directory \"%s\" is not empty" -msgstr "目錄\"%s\"不是空的" - -# commands/tablespace.c:355 commands/tablespace.c:984 -#: commands/tablespace.c:351 commands/tablespace.c:1048 -#, c-format -msgid "could not create symbolic link \"%s\": %m" -msgstr "無法建立symbolic link \"%s\"：%m" - -# commands/tablespace.c:386 commands/tablespace.c:483 -#: commands/tablespace.c:382 commands/tablespace.c:479 -msgid "tablespaces are not supported on this platform" -msgstr "這個平臺不支援tablespace" - -# commands/tablespace.c:460 -#: commands/tablespace.c:456 -#, c-format -msgid "tablespace \"%s\" is not empty" -msgstr "tablespace \"%s\"不是空的" - -# commands/tablespace.c:559 -#: commands/tablespace.c:555 -#, c-format -msgid "could not delete directory \"%s\": %m" -msgstr "無法刪除目錄\"%s\"：%m" - -# commands/tablespace.c:610 -#: commands/tablespace.c:606 -#, c-format -msgid "could not remove directory \"%s\": %m" -msgstr "無法刪除目錄\"%s\"：%m" - -# commands/tablespace.c:355 commands/tablespace.c:984 -#: commands/tablespace.c:614 -#, c-format -msgid "could not remove symbolic link \"%s\": %m" -msgstr "無法刪除symbolic link \"%s\"：%m" - -# commands/tablespace.c:997 -#: commands/tablespace.c:1061 -#, c-format -msgid "tablespace %u is not empty" -msgstr "tablespace %u 不是空的" - -# commands/typecmds.c:138 -#: commands/typecmds.c:138 -#, c-format -msgid "type names must be %d characters or less" -msgstr "型別名稱必須在%d個字元以下" - -# commands/typecmds.c:173 -#: commands/typecmds.c:173 -#, c-format -msgid "array element type cannot be %s" -msgstr "陣列元素型別不可為 %s" - -# commands/typecmds.c:206 -#: commands/typecmds.c:206 -#, c-format -msgid "alignment \"%s\" not recognized" -msgstr "" - -# commands/typecmds.c:223 -#: commands/typecmds.c:223 -#, c-format -msgid "storage \"%s\" not recognized" -msgstr "" - -# commands/typecmds.c:228 -#: commands/typecmds.c:228 -#, c-format -msgid "type attribute \"%s\" not recognized" -msgstr "" - -# commands/typecmds.c:238 -#: commands/typecmds.c:238 -msgid "type input function must be specified" -msgstr "" - -# commands/typecmds.c:242 -#: commands/typecmds.c:242 -msgid "type output function must be specified" -msgstr "" - -# commands/typecmds.c:281 -#: commands/typecmds.c:281 -#, c-format -msgid "changing return type of function %s from \"opaque\" to %s" -msgstr "" - -# commands/typecmds.c:288 -#: commands/typecmds.c:288 -#, c-format -msgid "type input function %s must return type %s" -msgstr "" - -# commands/typecmds.c:298 -#: commands/typecmds.c:298 -#, c-format -msgid "changing return type of function %s from \"opaque\" to \"cstring\"" -msgstr "" - -# commands/typecmds.c:305 -#: commands/typecmds.c:305 -#, c-format -msgid "type output function %s must return type \"cstring\"" -msgstr "" - -# commands/typecmds.c:314 -#: commands/typecmds.c:314 -#, c-format -msgid "type receive function %s must return type %s" -msgstr "" - -# commands/typecmds.c:323 -#: commands/typecmds.c:323 -#, c-format -msgid "type send function %s must return type \"bytea\"" -msgstr "" - -# commands/typecmds.c:536 -#: commands/typecmds.c:536 -#, c-format -msgid "domain names must be %d characters or less" -msgstr "" - -# commands/typecmds.c:557 -#: commands/typecmds.c:557 -#, c-format -msgid "\"%s\" is not a valid base type for a domain" -msgstr "" - -# commands/typecmds.c:617 commands/typecmds.c:1504 -#: commands/typecmds.c:617 commands/typecmds.c:1504 -msgid "foreign key constraints not possible for domains" -msgstr "" - -# commands/typecmds.c:637 -#: commands/typecmds.c:637 -msgid "multiple default expressions" -msgstr "多個預設的expressions" - -# commands/typecmds.c:667 commands/typecmds.c:676 -#: commands/typecmds.c:667 commands/typecmds.c:676 -msgid "conflicting NULL/NOT NULL constraints" -msgstr "NULL/NOT NULL限制發生衝突" - -# commands/typecmds.c:695 commands/typecmds.c:1522 -#: commands/typecmds.c:695 commands/typecmds.c:1522 -msgid "unique constraints not possible for domains" -msgstr "" - -# commands/typecmds.c:701 commands/typecmds.c:1528 -#: commands/typecmds.c:701 commands/typecmds.c:1528 -msgid "primary key constraints not possible for domains" -msgstr "" - -# commands/typecmds.c:710 commands/typecmds.c:1537 -#: commands/typecmds.c:710 commands/typecmds.c:1537 -msgid "specifying constraint deferrability not supported for domains" -msgstr "" - -# commands/typecmds.c:831 commands/typecmds.c:1780 -#: commands/typecmds.c:831 commands/typecmds.c:1780 -#, c-format -msgid "\"%s\" is not a domain" -msgstr "\"%s\"不是一個domain" - -# commands/typecmds.c:901 -#: commands/typecmds.c:901 -#, c-format -msgid "changing argument type of function %s from \"opaque\" to \"cstring\"" -msgstr "" - -# commands/typecmds.c:971 -#: commands/typecmds.c:971 -#, c-format -msgid "changing argument type of function %s from \"opaque\" to %s" -msgstr "" - -# commands/typecmds.c:1083 -#: commands/typecmds.c:1083 -#, c-format -msgid "type analyze function %s must return type \"boolean\"" -msgstr "" - -# commands/typecmds.c:1112 -#: commands/typecmds.c:1112 -msgid "composite type must have at least one attribute" -msgstr "" - -# commands/typecmds.c:1341 -#: commands/typecmds.c:1341 -#, c-format -msgid "column \"%s\" of table \"%s\" contains null values" -msgstr "" - -# commands/typecmds.c:1608 -#: commands/typecmds.c:1608 -#, c-format -msgid "" -"column \"%s\" of table \"%s\" contains values that violate the new constraint" -msgstr "" - -# commands/typecmds.c:1814 -#: commands/typecmds.c:1814 -#, c-format -msgid "constraint \"%s\" for domain \"%s\" already exists" -msgstr "" - -# commands/typecmds.c:1855 commands/typecmds.c:1864 -#: commands/typecmds.c:1855 commands/typecmds.c:1864 -msgid "cannot use table references in domain check constraint" -msgstr "" - -# commands/typecmds.c:1876 -#: commands/typecmds.c:1876 -msgid "cannot use aggregate in check constraint" -msgstr "" - -# commands/typecmds.c:2090 -#: commands/typecmds.c:2090 -#, c-format -msgid "\"%s\" is a table's row type" -msgstr "" - -# commands/user.c:174 commands/user.c:272 commands/user.c:321 -# commands/user.c:402 -#: commands/user.c:174 commands/user.c:272 commands/user.c:321 -#: commands/user.c:402 -#, c-format -msgid "could not write to temporary file \"%s\": %m" -msgstr "無法寫入暫存檔\"%s\"：%m" - -# commands/user.c:209 -#: commands/user.c:209 -#, c-format -msgid "invalid group name \"%s\"" -msgstr "不合法的群組名稱\"%s\"" - -# commands/user.c:240 commands/user.c:371 -#: commands/user.c:240 commands/user.c:371 -#, c-format -msgid "invalid user name \"%s\"" -msgstr "不合法的使用者名稱\"%s\"" - -# commands/user.c:378 -#: commands/user.c:378 -#, c-format -msgid "invalid user password \"%s\"" -msgstr "無效的使用者密碼 \"%s\"" - -# commands/user.c:638 -#: commands/user.c:638 -msgid "user ID must be positive" -msgstr "使用者ID必須是正數" - -# commands/user.c:655 -#: commands/user.c:655 -msgid "must be superuser to create users" -msgstr "只有管理者能建立使用者" - -# commands/user.c:660 -#: commands/user.c:660 -#, c-format -msgid "user name \"%s\" is reserved" -msgstr "使用者名稱\"%s\"已被保留" - -# commands/user.c:697 commands/user.c:1252 -#: commands/user.c:697 commands/user.c:1252 -#, c-format -msgid "user \"%s\" already exists" -msgstr "使用者\"%s\"已經存在" - -# commands/user.c:702 -#: commands/user.c:702 -#, c-format -msgid "user ID %d is already assigned" -msgstr "使用者ID %d已經被指派" - -# commands/user.c:899 commands/user.c:1012 commands/user.c:1104 -# commands/user.c:1233 commands/variable.c:664 utils/cache/lsyscache.c:2064 -# utils/init/miscinit.c:335 -#: commands/user.c:899 commands/user.c:1012 commands/user.c:1104 -#: commands/user.c:1233 commands/variable.c:664 utils/cache/lsyscache.c:2044 -#: utils/init/miscinit.c:335 -#, c-format -msgid "user \"%s\" does not exist" -msgstr "使用者\"%s\"不存在" - -# commands/user.c:1077 -#: commands/user.c:1077 -msgid "must be superuser to drop users" -msgstr "只有管理者能刪除使用者" - -# commands/user.c:1111 -#: commands/user.c:1111 -msgid "current user cannot be dropped" -msgstr "不能刪除目前的使用者" - -# commands/user.c:1115 -#: commands/user.c:1115 -msgid "session user cannot be dropped" -msgstr "不能月除session使用者" - -# commands/user.c:1142 -#: commands/user.c:1142 -#, c-format -msgid "user \"%s\" cannot be dropped" -msgstr "不能刪除使用者\"%s\"" - -# commands/user.c:1143 -#: commands/user.c:1143 -#, c-format -msgid "The user owns database \"%s\"." -msgstr "使用者擁有資料庫\"%s\"。" - -# commands/user.c:1244 -#: commands/user.c:1244 -msgid "session user may not be renamed" -msgstr "不能重新命名session使用者" - -# commands/user.c:1258 -#: commands/user.c:1258 -msgid "must be superuser to rename users" -msgstr "只有管理者能重新命名使用者" - -# commands/user.c:1277 -#: commands/user.c:1277 -msgid "MD5 password cleared because of user rename" -msgstr "" - -# commands/user.c:1311 -#: commands/user.c:1311 -#, c-format -msgid "before using passwords you must revoke privileges on %s" -msgstr "" - -# commands/user.c:1313 -#: commands/user.c:1313 -msgid "" -"This restriction is to prevent unprivileged users from reading the passwords." -msgstr "" - -# commands/user.c:1314 -#: commands/user.c:1314 -#, c-format -msgid "Try REVOKE ALL ON \"%s\" FROM PUBLIC." -msgstr "" - -# commands/user.c:1378 -#: commands/user.c:1378 -msgid "group ID must be positive" -msgstr "群組ID必需是正數" - -# commands/user.c:1391 -#: commands/user.c:1391 -msgid "must be superuser to create groups" -msgstr "只有管理者才能建立群組" - -# commands/user.c:1396 -#: commands/user.c:1396 -#, c-format -msgid "group name \"%s\" is reserved" -msgstr "群組名稱\"%s\"被保留" - -# commands/user.c:1433 commands/user.c:1815 -#: commands/user.c:1433 commands/user.c:1815 -#, c-format -msgid "group \"%s\" already exists" -msgstr "群組\"%s\"已經存在" - -# commands/user.c:1438 -#: commands/user.c:1438 -#, c-format -msgid "group ID %d is already assigned" -msgstr "" - -# commands/user.c:1518 -#: commands/user.c:1518 -msgid "must be superuser to alter groups" -msgstr "只有管理者才能修改群組" - -# commands/user.c:1597 -#: commands/user.c:1597 -#, c-format -msgid "group \"%s\" does not have any members" -msgstr "群組\"%s\"沒有任何成員" - -# commands/user.c:1625 -#: commands/user.c:1625 -#, c-format -msgid "user \"%s\" is not in group \"%s\"" -msgstr "使用者\"%s\"不屬於群組\"%s\"" - -# commands/user.c:1757 -#: commands/user.c:1757 -msgid "must be superuser to drop groups" -msgstr "只有管理者能刪除群組" - -# commands/user.c:1821 -#: commands/user.c:1821 -msgid "must be superuser to rename groups" -msgstr "只有管理者能重新命名群組" - -# commands/vacuum.c:586 -#: commands/vacuum.c:586 -msgid "oldest xmin is far in the past" -msgstr "" - -# commands/vacuum.c:587 -#: commands/vacuum.c:587 -msgid "Close open transactions soon to avoid wraparound problems." -msgstr "" - -# commands/vacuum.c:804 -#: commands/vacuum.c:804 -msgid "some databases have not been vacuumed in over 2 billion transactions" -msgstr "" - -# commands/vacuum.c:805 -#: commands/vacuum.c:805 -msgid "You may have already suffered transaction-wraparound data loss." -msgstr "" - -# commands/vacuum.c:816 -#: commands/vacuum.c:816 -msgid "some databases have not been vacuumed in over 1 billion transactions" -msgstr "" - -# commands/vacuum.c:817 -#: commands/vacuum.c:817 -msgid "Better vacuum them soon, or you may have a wraparound failure." -msgstr "" - -# commands/vacuum.c:824 -#: commands/vacuum.c:824 -#, c-format -msgid "some databases have not been vacuumed in %d transactions" -msgstr "" - -# commands/vacuum.c:826 -#: commands/vacuum.c:826 -#, c-format -msgid "" -"Better vacuum them within %d transactions, or you may have a wraparound " -"failure." -msgstr "" - -# commands/vacuum.c:922 -#: commands/vacuum.c:922 -#, c-format -msgid "skipping \"%s\" --- only table or database owner can vacuum it" -msgstr "忽略\"%s\" --- 只有資料表或資料庫擁有者能進行重整" - -# commands/vacuum.c:937 -#: commands/vacuum.c:937 -#, c-format -msgid "" -"skipping \"%s\" --- cannot vacuum indexes, views, or special system tables" -msgstr "忽略\"%s\" --- 無法重整索引、view或特殊系統資料表" - -# commands/vacuum.c:1160 commands/vacuumlazy.c:205 -#: commands/vacuum.c:1160 commands/vacuumlazy.c:205 -#, c-format -msgid "vacuuming \"%s.%s\"" -msgstr "重整\"%s.%s\"" - -# commands/vacuum.c:1202 commands/vacuumlazy.c:263 -#: commands/vacuum.c:1208 commands/vacuumlazy.c:263 -#, c-format -msgid "relation \"%s\" page %u is uninitialized --- fixing" -msgstr "" - -# commands/vacuum.c:1328 -#: commands/vacuum.c:1331 -#, c-format -msgid "" -"relation \"%s\" TID %u/%u: InsertTransactionInProgress %u --- can't shrink " -"relation" -msgstr "" - -# commands/vacuum.c:1341 -#: commands/vacuum.c:1344 -#, c-format -msgid "" -"relation \"%s\" TID %u/%u: DeleteTransactionInProgress %u --- can't shrink " -"relation" -msgstr "" - -# commands/vacuum.c:1499 commands/vacuumlazy.c:428 -#: commands/vacuum.c:1498 commands/vacuumlazy.c:422 -#, c-format -msgid "" -"\"%s\": found %.0f removable, %.0f nonremovable row versions in %u pages" -msgstr "" - -# commands/vacuum.c:1502 -#: commands/vacuum.c:1501 -#, c-format -msgid "" -"%.0f dead row versions cannot be removed yet.\n" -"Nonremovable row versions range from %lu to %lu bytes long.\n" -"There were %.0f unused item pointers.\n" -"Total free space (including removable row versions) is %.0f bytes.\n" -"%u pages are or will become empty, including %u at the end of the table.\n" -"%u pages containing %.0f free bytes are potential move destinations.\n" -"%s" -msgstr "" - -# commands/vacuum.c:2255 -#: commands/vacuum.c:2254 -#, c-format -msgid "\"%s\": moved %u row versions, truncated %u to %u pages" -msgstr "" - -# commands/vacuum.c:2258 commands/vacuumlazy.c:489 commands/vacuumlazy.c:770 -# nodes/print.c:86 storage/lmgr/deadlock.c:888 tcop/postgres.c:3285 -#: commands/vacuum.c:2257 commands/vacuumlazy.c:483 commands/vacuumlazy.c:774 -#: nodes/print.c:86 storage/lmgr/deadlock.c:888 tcop/postgres.c:3341 -#, c-format -msgid "%s" -msgstr "%s" - -# commands/vacuum.c:2770 commands/vacuumlazy.c:767 -#: commands/vacuum.c:2769 commands/vacuumlazy.c:771 -#, c-format -msgid "\"%s\": truncated %u to %u pages" -msgstr "" - -# commands/vacuum.c:2860 commands/vacuum.c:2927 commands/vacuumlazy.c:597 -# commands/vacuumlazy.c:657 -#: commands/vacuum.c:2859 commands/vacuum.c:2926 commands/vacuumlazy.c:596 -#: commands/vacuumlazy.c:661 -#, c-format -msgid "index \"%s\" now contains %.0f row versions in %u pages" -msgstr "" - -# commands/vacuum.c:2864 commands/vacuumlazy.c:601 -#: commands/vacuum.c:2863 commands/vacuumlazy.c:600 -#, c-format -msgid "" -"%u index pages have been deleted, %u are currently reusable.\n" -"%s" -msgstr "" - -# commands/vacuum.c:2878 commands/vacuum.c:2947 -#: commands/vacuum.c:2877 commands/vacuum.c:2946 -#, c-format -msgid "" -"index \"%s\" contains %.0f row versions, but table contains %.0f row versions" -msgstr "" - -# commands/vacuum.c:2881 commands/vacuum.c:2950 -#: commands/vacuum.c:2880 commands/vacuum.c:2949 -msgid "Rebuild the index with REINDEX." -msgstr "以 REINDEX 重建索引。" - -# commands/vacuum.c:2931 commands/vacuumlazy.c:661 -#: commands/vacuum.c:2930 commands/vacuumlazy.c:665 -#, c-format -msgid "" -"%.0f index row versions were removed.\n" -"%u index pages have been deleted, %u are currently reusable.\n" -"%s" -msgstr "" - -# commands/vacuumlazy.c:431 -#: commands/vacuumlazy.c:425 -#, c-format -msgid "" -"%.0f dead row versions cannot be removed yet.\n" -"There were %.0f unused item pointers.\n" -"%u pages are entirely empty.\n" -"%s" -msgstr "" - -# commands/vacuumlazy.c:486 -#: commands/vacuumlazy.c:480 -#, c-format -msgid "\"%s\": removed %d row versions in %d pages" -msgstr "" - -# commands/variable.c:65 -#: commands/variable.c:65 -msgid "invalid list syntax for parameter \"datestyle\"" -msgstr "" - -# commands/variable.c:151 -#: commands/variable.c:151 -#, c-format -msgid "unrecognized \"datestyle\" key word: \"%s\"" -msgstr "" - -# commands/variable.c:169 -#: commands/variable.c:169 -msgid "conflicting \"datestyle\" specifications" -msgstr "" - -# commands/variable.c:280 -#: commands/variable.c:280 -msgid "invalid interval value for time zone: month not allowed" -msgstr "" - -# commands/variable.c:403 -#: commands/variable.c:403 -#, c-format -msgid "unrecognized time zone name: \"%s\"" -msgstr "無法識別的時區名稱: \"%s\"" - -# commands/variable.c:411 -#: commands/variable.c:411 -#, c-format -msgid "time zone \"%s\" appears to use leap seconds" -msgstr "" - -# commands/variable.c:413 -#: commands/variable.c:413 -msgid "PostgreSQL does not support leap seconds." -msgstr "" - -# commands/variable.c:483 -#: commands/variable.c:483 -msgid "SET TRANSACTION ISOLATION LEVEL must be called before any query" -msgstr "" - -# commands/variable.c:493 -#: commands/variable.c:493 -msgid "SET TRANSACTION ISOLATION LEVEL must not be called in a subtransaction" -msgstr "" - -# commands/variable.c:593 utils/mb/mbutils.c:188 -#: commands/variable.c:593 utils/mb/mbutils.c:188 -#, c-format -msgid "conversion between %s and %s is not supported" -msgstr "" - -# commands/view.c:89 -#: commands/view.c:89 -msgid "view must have at least one column" -msgstr "view至少要有一個欄位" - -# commands/view.c:170 commands/view.c:182 -#: commands/view.c:170 commands/view.c:182 -msgid "cannot change number of columns in view" -msgstr "不能變更view的欄位數" - -# commands/view.c:187 -#: commands/view.c:187 -#, c-format -msgid "cannot change name of view column \"%s\"" -msgstr "無法修改view欄位\"%s\"的名稱" - -# commands/view.c:194 -#: commands/view.c:194 -#, c-format -msgid "cannot change data type of view column \"%s\"" -msgstr "不能變更view欄位\"%s\"的資料型別" - -# executor/execMain.c:814 -#: executor/execMain.c:814 -#, c-format -msgid "cannot change sequence \"%s\"" -msgstr "無法修改sequence \"%s\"" - -# executor/execMain.c:820 -#: executor/execMain.c:820 -#, c-format -msgid "cannot change TOAST relation \"%s\"" -msgstr "無法修改TOAST relation \"%s\"" - -# executor/execMain.c:826 -#: executor/execMain.c:826 -#, c-format -msgid "cannot change view \"%s\"" -msgstr "無法修改view \"%s\"" - -# executor/execMain.c:1731 -#: executor/execMain.c:1731 -#, c-format -msgid "null value in column \"%s\" violates not-null constraint" -msgstr "" - -# executor/execMain.c:1743 -#: executor/execMain.c:1743 -#, c-format -msgid "new row for relation \"%s\" violates check constraint \"%s\"" -msgstr "" - -# executor/execQual.c:257 executor/execQual.c:285 executor/execQual.c:2065 -# utils/adt/array_userfuncs.c:362 utils/adt/arrayfuncs.c:216 -# utils/adt/arrayfuncs.c:472 utils/adt/arrayfuncs.c:1153 -# utils/adt/arrayfuncs.c:2421 -#: executor/execQual.c:257 executor/execQual.c:285 executor/execQual.c:2065 -#: utils/adt/array_userfuncs.c:362 utils/adt/arrayfuncs.c:216 -#: utils/adt/arrayfuncs.c:472 utils/adt/arrayfuncs.c:1153 -#: utils/adt/arrayfuncs.c:2421 -#, c-format -msgid "number of array dimensions (%d) exceeds the maximum allowed (%d)" -msgstr "" - -# executor/execQual.c:811 -#: executor/execQual.c:811 -msgid "functions and operators can take at most one set argument" -msgstr "" - -# executor/execQual.c:866 executor/execQual.c:910 executor/execQual.c:1086 -# executor/execQual.c:1211 executor/execQual.c:3445 executor/functions.c:666 -# executor/functions.c:705 utils/fmgr/funcapi.c:39 -#: executor/execQual.c:866 executor/execQual.c:910 executor/execQual.c:1086 -#: executor/execQual.c:1211 executor/execQual.c:3445 executor/functions.c:666 -#: executor/functions.c:705 utils/fmgr/funcapi.c:39 -msgid "set-valued function called in context that cannot accept a set" -msgstr "" - -# executor/execQual.c:1293 -#: executor/execQual.c:1293 -msgid "function returning set of rows cannot return null value" -msgstr "" - -# executor/execQual.c:1377 -#: executor/execQual.c:1377 -msgid "table-function protocol for materialize mode was not followed" -msgstr "" - -# executor/execQual.c:1384 -#: executor/execQual.c:1384 -#, c-format -msgid "unrecognized table-function returnMode: %d" -msgstr "" - -# executor/execQual.c:1530 -#: executor/execQual.c:1530 -msgid "IS DISTINCT FROM does not support set arguments" -msgstr "" - -# executor/execQual.c:1604 -#: executor/execQual.c:1604 -msgid "op ANY/ALL (array) does not support set arguments" -msgstr "" - -# executor/execQual.c:2051 -#: executor/execQual.c:2051 -msgid "cannot merge incompatible arrays" -msgstr "" - -# executor/execQual.c:2052 -#: executor/execQual.c:2052 -#, c-format -msgid "" -"Array with element type %s cannot be included in ARRAY construct with " -"element type %s." -msgstr "" - -# executor/execQual.c:2085 utils/adt/arrayfuncs.c:507 -#: executor/execQual.c:2085 utils/adt/arrayfuncs.c:507 -msgid "" -"multidimensional arrays must have array expressions with matching dimensions" -msgstr "" - -# executor/execQual.c:2251 -#: executor/execQual.c:2251 -msgid "NULLIF does not support set arguments" -msgstr "" - -# executor/execQual.c:2432 -#: executor/execQual.c:2432 -#, c-format -msgid "domain %s does not allow null values" -msgstr "" - -# executor/execQual.c:2462 -#: executor/execQual.c:2462 -#, c-format -msgid "value for domain %s violates check constraint \"%s\"" -msgstr "" - -# executor/execQual.c:2804 optimizer/util/clauses.c:427 parser/parse_agg.c:74 -#: executor/execQual.c:2804 optimizer/util/clauses.c:428 parser/parse_agg.c:74 -msgid "aggregate function calls may not be nested" -msgstr "" - -# executor/execQual.c:3066 -#: executor/execQual.c:3066 -#, c-format -msgid "ROW() column has type %s instead of type %s" -msgstr "ROW()欄位的型別為%s而非%s" - -# translator: %s is a SQL statement name -# executor/functions.c:117 -#. translator: %s is a SQL statement name -#: executor/functions.c:117 -#, c-format -msgid "%s is not allowed in a SQL function" -msgstr "SQL函式不允許 %s" - -# translator: %s is a SQL statement name -# executor/functions.c:124 executor/spi.c:1396 -#. translator: %s is a SQL statement name -#: executor/functions.c:124 executor/spi.c:1404 -#, c-format -msgid "%s is not allowed in a non-volatile function" -msgstr "non-volatile函式不允許 %s" - -# executor/functions.c:190 -#: executor/functions.c:190 -#, c-format -msgid "" -"could not determine actual result type for function declared to return type %" -"s" -msgstr "" - -# executor/functions.c:244 -#: executor/functions.c:244 -#, c-format -msgid "could not determine actual type of argument declared %s" -msgstr "" - -# executor/functions.c:790 -#: executor/functions.c:790 -#, c-format -msgid "SQL function \"%s\" statement %d" -msgstr "" - -# executor/functions.c:809 -#: executor/functions.c:809 -#, c-format -msgid "SQL function \"%s\" during startup" -msgstr "" - -# executor/functions.c:889 executor/functions.c:910 executor/functions.c:920 -# executor/functions.c:944 executor/functions.c:952 executor/functions.c:1004 -# executor/functions.c:1016 executor/functions.c:1036 -#: executor/functions.c:889 executor/functions.c:910 executor/functions.c:920 -#: executor/functions.c:944 executor/functions.c:952 executor/functions.c:1004 -#: executor/functions.c:1016 executor/functions.c:1036 -#, c-format -msgid "return type mismatch in function declared to return %s" -msgstr "" - -# executor/functions.c:891 executor/functions.c:922 -#: executor/functions.c:891 executor/functions.c:922 -msgid "Function's final statement must be a SELECT." -msgstr "函式最後的敘述必須是SELECT。" - -# executor/functions.c:912 -#: executor/functions.c:912 -msgid "Function's final statement must not be a SELECT." -msgstr "函式最後的敘述不能是SELECT。" - -# executor/functions.c:946 -#: executor/functions.c:946 -msgid "Final SELECT must return exactly one column." -msgstr "最後的SELECT只能傳回一個欄位。" - -# executor/functions.c:954 -#: executor/functions.c:954 -#, c-format -msgid "Actual return type is %s." -msgstr "實際傳回型別是%s。" - -# executor/functions.c:1006 -#: executor/functions.c:1006 -msgid "Final SELECT returns too many columns." -msgstr "最後的SELECT傳回過多欄位。" - -# executor/functions.c:1018 -#: executor/functions.c:1018 -#, c-format -msgid "Final SELECT returns %s instead of %s at column %d." -msgstr "最後的SELECT傳回 %s 而非 %s 於欄位 %d。" - -# executor/functions.c:1038 -#: executor/functions.c:1038 -msgid "Final SELECT returns too few columns." -msgstr "最後的SELECT傳回欄位不足。" - -# executor/functions.c:1088 -#: executor/functions.c:1088 -#, c-format -msgid "return type %s is not supported for SQL functions" -msgstr "SQL函式不支援傳回%s型別" - -# executor/nodeAgg.c:1330 -#: executor/nodeAgg.c:1330 -#, c-format -msgid "aggregate %u needs to have compatible input type and transition type" -msgstr "" - -# executor/nodeFunctionscan.c:93 -#: executor/nodeFunctionscan.c:93 -msgid "query-specified return row and actual function return row do not match" -msgstr "" - -# executor/nodeHashjoin.c:571 executor/nodeHashjoin.c:581 -#: executor/nodeHashjoin.c:571 executor/nodeHashjoin.c:581 -#, c-format -msgid "could not read from hash-join temporary file: %m" -msgstr "" - -# executor/nodeHashjoin.c:641 executor/nodeHashjoin.c:648 -#: executor/nodeHashjoin.c:641 executor/nodeHashjoin.c:648 -#, c-format -msgid "could not rewind hash-join temporary file: %m" -msgstr "" - -# executor/nodeHashjoin.c:699 executor/nodeHashjoin.c:704 -#: executor/nodeHashjoin.c:699 executor/nodeHashjoin.c:704 -#, c-format -msgid "could not write to hash-join temporary file: %m" -msgstr "" - -# executor/nodeMergejoin.c:1474 -#: executor/nodeMergejoin.c:1474 -msgid "RIGHT JOIN is only supported with merge-joinable join conditions" -msgstr "" - -# executor/nodeMergejoin.c:1491 optimizer/path/joinpath.c:839 -#: executor/nodeMergejoin.c:1491 optimizer/path/joinpath.c:839 -msgid "FULL JOIN is only supported with merge-joinable join conditions" -msgstr "" - -# executor/nodeSubplan.c:294 executor/nodeSubplan.c:336 -# executor/nodeSubplan.c:972 -#: executor/nodeSubplan.c:294 executor/nodeSubplan.c:336 -#: executor/nodeSubplan.c:972 -msgid "more than one row returned by a subquery used as an expression" -msgstr "" - -# executor/spi.c:190 -#: executor/spi.c:190 -msgid "transaction left non-empty SPI stack" -msgstr "" - -# executor/spi.c:191 executor/spi.c:255 -#: executor/spi.c:191 executor/spi.c:255 -msgid "Check for missing \"SPI_finish\" calls." -msgstr "" - -# executor/spi.c:254 -#: executor/spi.c:254 -msgid "subtransaction left non-empty SPI stack" -msgstr "" - -# executor/spi.c:831 -#: executor/spi.c:839 -msgid "cannot open multi-query plan as cursor" -msgstr "" - -# executor/spi.c:838 -#: executor/spi.c:846 -msgid "cannot open non-SELECT query as cursor" -msgstr "" - -# executor/spi.c:842 -#: executor/spi.c:850 -msgid "cannot open SELECT INTO query as cursor" -msgstr "" - -# executor/spi.c:1574 -#: executor/spi.c:1582 -#, c-format -msgid "SQL statement \"%s\"" -msgstr "SQL敘述\"%s\"" - -# libpq/be-fsstubs.c:132 libpq/be-fsstubs.c:170 libpq/be-fsstubs.c:194 -# libpq/be-fsstubs.c:222 libpq/be-fsstubs.c:274 -#: libpq/be-fsstubs.c:132 libpq/be-fsstubs.c:170 libpq/be-fsstubs.c:194 -#: libpq/be-fsstubs.c:222 libpq/be-fsstubs.c:274 -#, c-format -msgid "invalid large-object descriptor: %d" -msgstr "" - -# libpq/be-fsstubs.c:378 -#: libpq/be-fsstubs.c:378 -msgid "must be superuser to use server-side lo_import()" -msgstr "必須是管理者才能使用伺服端 lo_import()" - -# libpq/be-fsstubs.c:379 -#: libpq/be-fsstubs.c:379 -msgid "Anyone can use the client-side lo_import() provided by libpq." -msgstr "任何人都能使用 libpq 提供的客戶端 lo_import()。" - -# libpq/be-fsstubs.c:400 -#: libpq/be-fsstubs.c:400 -#, c-format -msgid "could not open server file \"%s\": %m" -msgstr "無法開啟伺服器檔案 \"%s\": %m" - -# libpq/be-fsstubs.c:421 -#: libpq/be-fsstubs.c:421 -#, c-format -msgid "could not read server file \"%s\": %m" -msgstr "無法讀取伺服器檔案\"%s\"：%m" - -# libpq/be-fsstubs.c:451 -#: libpq/be-fsstubs.c:451 -msgid "must be superuser to use server-side lo_export()" -msgstr "必須是管理者才能使用伺服端 lo_export()" - -# libpq/be-fsstubs.c:452 -#: libpq/be-fsstubs.c:452 -msgid "Anyone can use the client-side lo_export() provided by libpq." -msgstr "任何人都能使用 libpq 提供的客戶端 lo_export()。" - -# libpq/be-fsstubs.c:484 -#: libpq/be-fsstubs.c:484 -#, c-format -msgid "could not create server file \"%s\": %m" -msgstr "無法建立伺服器檔案\"%s\"：%m" - -# libpq/be-fsstubs.c:496 -#: libpq/be-fsstubs.c:496 -#, c-format -msgid "could not write server file \"%s\": %m" -msgstr "無法寫入伺服器檔案\"%s\"：%m" - -# libpq/auth.c:113 -#: libpq/auth.c:113 -#, c-format -msgid "Kerberos error: %s" -msgstr "Kerberos 錯誤: %s" - -# libpq/auth.c:119 -#: libpq/auth.c:119 -#, c-format -msgid "" -"unexpected Kerberos protocol version received from client (received \"%s\", " -"expected \"%s\")" -msgstr "" - -# libpq/auth.c:126 libpq/auth.c:306 -#: libpq/auth.c:126 libpq/auth.c:306 -#, c-format -msgid "" -"unexpected Kerberos user name received from client (received \"%s\", " -"expected \"%s\")" -msgstr "" - -# libpq/auth.c:140 -#: libpq/auth.c:140 -msgid "Kerberos 4 not implemented on this server" -msgstr "這個伺服器並未實作 Kerberos 4" - -# libpq/auth.c:201 -#: libpq/auth.c:201 -#, c-format -msgid "Kerberos initialization returned error %d" -msgstr "Kerberos 初始化傳回錯誤 %d" - -# libpq/auth.c:211 -#: libpq/auth.c:211 -#, c-format -msgid "Kerberos keytab resolving returned error %d" -msgstr "Kerberos keytab解析傳回錯誤%d" - -# libpq/auth.c:224 -#: libpq/auth.c:224 -#, c-format -msgid "Kerberos sname_to_principal(\"%s\") returned error %d" -msgstr "Kerberos sname_to_principal(\"%s\")傳回錯誤%d" - -# libpq/auth.c:269 -#: libpq/auth.c:269 -#, c-format -msgid "Kerberos recvauth returned error %d" -msgstr "Kerberos recvauth傳回錯誤%d" - -# libpq/auth.c:294 -#: libpq/auth.c:294 -#, c-format -msgid "Kerberos unparse_name returned error %d" -msgstr "Kerberos unparse_name傳回錯誤%d" - -# libpq/auth.c:327 -#: libpq/auth.c:327 -msgid "Kerberos 5 not implemented on this server" -msgstr "這個伺服器並未實作 Kerberos 5" - -# libpq/auth.c:366 -#: libpq/auth.c:366 -#, c-format -msgid "authentication failed for user \"%s\": host rejected" -msgstr "驗證使用者\"%s\"失敗：主機被拒絕" - -# libpq/auth.c:369 -#: libpq/auth.c:369 -#, c-format -msgid "Kerberos 4 authentication failed for user \"%s\"" -msgstr "Kerberos 4驗證使用者\"%s\"失敗" - -# libpq/auth.c:372 -#: libpq/auth.c:372 -#, c-format -msgid "Kerberos 5 authentication failed for user \"%s\"" -msgstr "Kerberos 5驗證使用者\"%s\"失敗" - -# libpq/auth.c:375 -#: libpq/auth.c:375 -#, c-format -msgid "\"trust\" authentication failed for user \"%s\"" -msgstr "\"trust\"驗證使用者\"%s\"失敗" - -# libpq/auth.c:378 -#: libpq/auth.c:378 -#, c-format -msgid "Ident authentication failed for user \"%s\"" -msgstr "Ident驗證使用者\"%s\"失敗" - -# libpq/auth.c:383 -#: libpq/auth.c:383 -#, c-format -msgid "password authentication failed for user \"%s\"" -msgstr "密碼驗證使用者\"%s\"失敗" - -# libpq/auth.c:387 -#: libpq/auth.c:387 -#, c-format -msgid "PAM authentication failed for user \"%s\"" -msgstr "PAM驗證使用者\"%s\"失敗" - -# libpq/auth.c:391 -#: libpq/auth.c:391 -#, c-format -msgid "authentication failed for user \"%s\": invalid authentication method" -msgstr "驗證使用者\"%s\"失敗：無效的驗證方式" - -# libpq/auth.c:420 -#: libpq/auth.c:420 -msgid "missing or erroneous pg_hba.conf file" -msgstr "找不到pg_hba.conf或內容不正確" - -# libpq/auth.c:421 -#: libpq/auth.c:421 -msgid "See server log for details." -msgstr "查看伺服器記錄檔以獲得詳細資料。" - -# libpq/auth.c:447 -#: libpq/auth.c:447 -#, c-format -msgid "no pg_hba.conf entry for host \"%s\", user \"%s\", database \"%s\", %s" -msgstr "" - -# libpq/auth.c:449 -#: libpq/auth.c:449 -msgid "SSL on" -msgstr "SSL 開啟" - -# libpq/auth.c:449 -#: libpq/auth.c:449 -msgid "SSL off" -msgstr "SSL 關閉" - -# libpq/auth.c:453 -#: libpq/auth.c:453 -#, c-format -msgid "no pg_hba.conf entry for host \"%s\", user \"%s\", database \"%s\"" -msgstr "" - -# libpq/auth.c:465 -#: libpq/auth.c:465 -msgid "Kerberos 4 only supports IPv4 connections" -msgstr "Kerberos 4 只支援 IPv4 連線" - -# libpq/auth.c:498 -#: libpq/auth.c:498 -#, c-format -msgid "could not enable credential reception: %m" -msgstr "" - -# libpq/auth.c:585 -#: libpq/auth.c:585 -#, c-format -msgid "error from underlying PAM layer: %s" -msgstr "" - -# libpq/auth.c:590 -#: libpq/auth.c:590 -#, c-format -msgid "unsupported PAM conversation %d/%s" -msgstr "" - -# libpq/auth.c:622 -#: libpq/auth.c:622 -msgid "empty password returned by client" -msgstr "" - -# libpq/auth.c:682 -#: libpq/auth.c:682 -#, c-format -msgid "could not create PAM authenticator: %s" -msgstr "" - -# libpq/auth.c:693 -#: libpq/auth.c:693 -#, c-format -msgid "pam_set_item(PAM_USER) failed: %s" -msgstr "" - -# libpq/auth.c:704 -#: libpq/auth.c:704 -#, c-format -msgid "pam_set_item(PAM_CONV) failed: %s" -msgstr "" - -# libpq/auth.c:715 -#: libpq/auth.c:715 -#, c-format -msgid "pam_authenticate failed: %s" -msgstr "pam_authenticate失敗：%s" - -# libpq/auth.c:726 -#: libpq/auth.c:726 -#, c-format -msgid "pam_acct_mgmt failed: %s" -msgstr "pam_acct_mgmt失敗：%s" - -# libpq/auth.c:737 -#: libpq/auth.c:737 -#, c-format -msgid "could not release PAM authenticator: %s" -msgstr "" - -# libpq/auth.c:775 -#: libpq/auth.c:775 -#, c-format -msgid "expected password response, got message type %d" -msgstr "" - -# libpq/auth.c:803 -#: libpq/auth.c:803 -msgid "invalid password packet size" -msgstr "無效的密碼封包大小" - -# libpq/auth.c:807 -#: libpq/auth.c:807 -msgid "received password packet" -msgstr "已接收密碼封包" - -# libpq/be-secure.c:281 libpq/be-secure.c:374 -#: libpq/be-secure.c:281 libpq/be-secure.c:374 -#, c-format -msgid "SSL SYSCALL error: %m" -msgstr "SSL SYSCALL 錯誤: %m" - -# libpq/be-secure.c:286 libpq/be-secure.c:379 -#: libpq/be-secure.c:286 libpq/be-secure.c:379 -msgid "SSL SYSCALL error: EOF detected" -msgstr "SSL SYSCALL 錯誤: 偵測到 EOF" - -# libpq/be-secure.c:294 libpq/be-secure.c:387 -#: libpq/be-secure.c:294 libpq/be-secure.c:387 -#, c-format -msgid "SSL error: %s" -msgstr "SSL 錯誤: %s" - -# libpq/be-secure.c:303 libpq/be-secure.c:396 -#: libpq/be-secure.c:303 libpq/be-secure.c:396 libpq/be-secure.c:813 -#, c-format -msgid "unrecognized SSL error code: %d" -msgstr "無法識別的SSL錯誤碼：%d" - -# libpq/be-secure.c:336 libpq/be-secure.c:340 libpq/be-secure.c:350 -#: libpq/be-secure.c:336 libpq/be-secure.c:340 libpq/be-secure.c:350 -msgid "SSL renegotiation failure" -msgstr "" - -# libpq/be-secure.c:344 -#: libpq/be-secure.c:344 -msgid "SSL failed to send renegotiation request" -msgstr "" - -# libpq/be-secure.c:649 -#: libpq/be-secure.c:649 -#, c-format -msgid "could not create SSL context: %s" -msgstr "無法建立SSL context：%s" - -# libpq/be-secure.c:659 -#: libpq/be-secure.c:659 -#, c-format -msgid "could not load server certificate file \"%s\": %s" -msgstr "無法載入伺服器憑證檔\"%s\"：%s" - -# libpq/be-secure.c:666 -#: libpq/be-secure.c:666 -#, c-format -msgid "could not access private key file \"%s\": %m" -msgstr "無法存取私鑰檔\"%s\"：%m" - -# libpq/be-secure.c:682 -#: libpq/be-secure.c:682 -#, c-format -msgid "unsafe permissions on private key file \"%s\"" -msgstr "私鑰檔\"%s\"的存取權限不安全" - -# libpq/be-secure.c:684 -#: libpq/be-secure.c:684 -msgid "" -"File must be owned by the database user and must have no permissions for " -"\"group\" or \"other\"." -msgstr "" - -# libpq/be-secure.c:689 -#: libpq/be-secure.c:689 -#, c-format -msgid "could not load private key file \"%s\": %s" -msgstr "無法載入私鑰檔\"%s\"：%s" - -# libpq/be-secure.c:694 -#: libpq/be-secure.c:694 -#, c-format -msgid "check of private key failed: %s" -msgstr "檢查私鑰失敗：%s" - -# libpq/be-secure.c:714 -#: libpq/be-secure.c:714 -#, c-format -msgid "could not load root certificate file \"%s\": %s" -msgstr "無法載入根憑證檔\"%s\"：%s" - -# libpq/be-secure.c:716 -#: libpq/be-secure.c:716 -msgid "Will not verify client certificates." -msgstr "" - -# libpq/be-secure.c:789 -#: libpq/be-secure.c:759 -#, c-format -msgid "could not initialize SSL connection: %s" -msgstr "無法初始化SSL連線：%s" - -# libpq/be-secure.c:798 -#: libpq/be-secure.c:768 -#, c-format -msgid "could not set SSL socket: %s" -msgstr "無法設定SSL socket：%s" - -# libpq/be-secure.c:807 -#: libpq/be-secure.c:793 -#, c-format -msgid "could not accept SSL connection: %m" -msgstr "無法接受SSL連線：%m" - -# libpq/be-secure.c:807 -#: libpq/be-secure.c:797 libpq/be-secure.c:808 -msgid "could not accept SSL connection: EOF detected" -msgstr "無法接受SSL連線：發現EOF" - -# libpq/be-secure.c:807 -#: libpq/be-secure.c:802 -#, c-format -msgid "could not accept SSL connection: %s" -msgstr "無法接受SSL連線：%s" - -# libpq/be-secure.c:832 -#: libpq/be-secure.c:840 -#, c-format -msgid "SSL connection from \"%s\"" -msgstr "SSL連線從\"%s\"" - -# libpq/crypt.c:62 -#: libpq/crypt.c:62 -msgid "" -"cannot use authentication method \"crypt\" because password is MD5-encrypted" -msgstr "" - -# libpq/hba.c:156 -#: libpq/hba.c:156 -#, c-format -msgid "authentication file token too long, skipping: \"%s\"" -msgstr "" - -# libpq/hba.c:325 -#: libpq/hba.c:324 -#, c-format -msgid "could not open secondary authentication file \"@%s\" as \"%s\": %m" -msgstr "" - -# libpq/hba.c:740 -#: libpq/hba.c:741 -#, c-format -msgid "invalid IP address \"%s\" in file \"%s\" line %d: %s" -msgstr "無效的IP位址\"%s\"於檔案\"%s\"列 %d：%s" - -# libpq/hba.c:775 -#: libpq/hba.c:776 -#, c-format -msgid "invalid IP mask \"%s\" in file \"%s\" line %d: %s" -msgstr "無效的IP遮罩\"%s\"於檔案\"%s\"列 %d：%s" - -# libpq/hba.c:790 -#: libpq/hba.c:791 -#, c-format -msgid "IP address and mask do not match in file \"%s\" line %d" -msgstr "" - -# libpq/hba.c:848 libpq/hba.c:1104 -#: libpq/hba.c:849 libpq/hba.c:1105 -#, c-format -msgid "invalid entry in file \"%s\" at line %d, token \"%s\"" -msgstr "" - -# libpq/hba.c:854 -#: libpq/hba.c:855 -#, c-format -msgid "missing field in file \"%s\" at end of line %d" -msgstr "" - -# guc-file.l:151 libpq/hba.c:1044 -#: guc-file.l:151 libpq/hba.c:1045 -#, c-format -msgid "could not open configuration file \"%s\": %m" -msgstr "無法開啟設定檔\"%s\"：%m" - -# libpq/hba.c:1110 -#: libpq/hba.c:1111 -#, c-format -msgid "missing entry in file \"%s\" at end of line %d" -msgstr "" - -# libpq/hba.c:1141 -#: libpq/hba.c:1142 -msgid "cannot use Ident authentication without usermap field" -msgstr "無法使用Ident驗證，沒有usermap欄位" - -# libpq/hba.c:1186 -#: libpq/hba.c:1187 -#, c-format -msgid "could not open Ident usermap file \"%s\": %m" -msgstr "無法開啟Ident usermap檔\"%s\"：%m" - -# libpq/hba.c:1364 -#: libpq/hba.c:1365 -#, c-format -msgid "could not create socket for Ident connection: %m" -msgstr "無法為Ident連線建立socket：%m" - -# libpq/hba.c:1380 -#: libpq/hba.c:1381 -#, c-format -msgid "could not bind to local address \"%s\": %m" -msgstr "無法bind至local位址\"%s\"：%m" - -# libpq/hba.c:1392 -#: libpq/hba.c:1393 -#, c-format -msgid "could not connect to Ident server at address \"%s\", port %s: %m" -msgstr "" - -# libpq/hba.c:1412 -#: libpq/hba.c:1413 -#, c-format -msgid "could not send query to Ident server at address \"%s\", port %s: %m" -msgstr "" - -# libpq/hba.c:1427 -#: libpq/hba.c:1428 -#, c-format -msgid "" -"could not receive response from Ident server at address \"%s\", port %s: %m" -msgstr "" - -# libpq/hba.c:1437 -#: libpq/hba.c:1438 -#, c-format -msgid "invalidly formatted response from Ident server: \"%s\"" -msgstr "" - -# libpq/hba.c:1472 libpq/hba.c:1503 libpq/hba.c:1571 -#: libpq/hba.c:1473 libpq/hba.c:1504 libpq/hba.c:1572 -#, c-format -msgid "could not get peer credentials: %m" -msgstr "" - -# libpq/hba.c:1481 libpq/hba.c:1512 libpq/hba.c:1582 -#: libpq/hba.c:1482 libpq/hba.c:1513 libpq/hba.c:1583 -#, c-format -msgid "local user with ID %d does not exist" -msgstr "本機使用者 ID %d 的使用者並不存在" - -# libpq/hba.c:1594 -#: libpq/hba.c:1595 -msgid "" -"Ident authentication is not supported on local connections on this platform" -msgstr "" - -# libpq/hba.c:1637 -#: libpq/hba.c:1638 -#, c-format -msgid "Ident protocol identifies remote user as \"%s\"" -msgstr "" - -# libpq/pqcomm.c:271 -#: libpq/pqcomm.c:271 -#, c-format -msgid "could not translate host name \"%s\", service \"%s\" to address: %s" -msgstr "" - -# libpq/pqcomm.c:275 -#: libpq/pqcomm.c:275 -#, c-format -msgid "could not translate service \"%s\" to address: %s" -msgstr "" - -# libpq/pqcomm.c:309 -#: libpq/pqcomm.c:309 -msgid "IPv4" -msgstr "IPv4" - -# libpq/pqcomm.c:313 -#: libpq/pqcomm.c:313 -msgid "IPv6" -msgstr "IPv6" - -# libpq/pqcomm.c:318 -#: libpq/pqcomm.c:318 -msgid "Unix" -msgstr "Unix" - -# libpq/pqcomm.c:323 -#: libpq/pqcomm.c:323 -#, c-format -msgid "unrecognized address family %d" -msgstr "無法識別的address family %d" - -# translator: %s is IPv4, IPv6, or Unix -# libpq/pqcomm.c:334 -#. translator: %s is IPv4, IPv6, or Unix -#: libpq/pqcomm.c:334 -#, c-format -msgid "could not create %s socket: %m" -msgstr "無法建立 %s socket：%m" - -# libpq/pqcomm.c:346 -#: libpq/pqcomm.c:346 -#, c-format -msgid "setsockopt(SO_REUSEADDR) failed: %m" -msgstr "setsockopt(SO_REUSEADDR)失敗：%m" - -# libpq/pqcomm.c:360 -#: libpq/pqcomm.c:360 -#, c-format -msgid "setsockopt(IPV6_V6ONLY) failed: %m" -msgstr "setsockopt(IPV6_V6ONLY)失敗：%m" - -# translator: %s is IPv4, IPv6, or Unix -# libpq/pqcomm.c:379 -#. translator: %s is IPv4, IPv6, or Unix -#: libpq/pqcomm.c:379 -#, c-format -msgid "could not bind %s socket: %m" -msgstr "無法bind %s socket：%m" - -# libpq/pqcomm.c:382 -#: libpq/pqcomm.c:382 -#, c-format -msgid "" -"Is another postmaster already running on port %d? If not, remove socket file " -"\"%s\" and retry." -msgstr "" - -# libpq/pqcomm.c:385 -#: libpq/pqcomm.c:385 -#, c-format -msgid "" -"Is another postmaster already running on port %d? If not, wait a few seconds " -"and retry." -msgstr "" - -# translator: %s is IPv4, IPv6, or Unix -# libpq/pqcomm.c:419 -#. translator: %s is IPv4, IPv6, or Unix -#: libpq/pqcomm.c:419 -#, c-format -msgid "could not listen on %s socket: %m" -msgstr "無法傾聽%s socket：%m" - -# libpq/pqcomm.c:509 -#: libpq/pqcomm.c:509 -#, c-format -msgid "could not set group of file \"%s\": %m" -msgstr "" - -# libpq/pqcomm.c:520 -#: libpq/pqcomm.c:520 -#, c-format -msgid "could not set permissions of file \"%s\": %m" -msgstr "無法設定檔案 \"%s\" 的權限: %m" - -# libpq/pqcomm.c:550 -#: libpq/pqcomm.c:550 -#, c-format -msgid "could not accept new connection: %m" -msgstr "無法接受新連線: %m" - -# libpq/pqcomm.c:702 -#: libpq/pqcomm.c:702 -#, c-format -msgid "could not receive data from client: %m" -msgstr "無法由客戶端接收資料: %m" - -# libpq/pqcomm.c:865 -#: libpq/pqcomm.c:895 -msgid "unexpected EOF within message length word" -msgstr "" - -# libpq/pqcomm.c:877 -#: libpq/pqcomm.c:906 -msgid "invalid message length" -msgstr "不合法的訊息長度" - -# libpq/pqcomm.c:891 -#: libpq/pqcomm.c:928 libpq/pqcomm.c:938 -msgid "incomplete message from client" -msgstr "用戶端傳送的訊息不完整" - -# libpq/pqcomm.c:1001 -#: libpq/pqcomm.c:1048 -#, c-format -msgid "could not send data to client: %m" -msgstr "無法傳送資料給用戶端：%m" - -# libpq/pqformat.c:443 -#: libpq/pqformat.c:443 -msgid "no data left in message" -msgstr "訊息中沒有資料" - -# libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630 -# utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523 -#: libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630 -#: utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523 -msgid "insufficient data left in message" -msgstr "訊息中的資料不足" - -# libpq/pqformat.c:671 -#: libpq/pqformat.c:671 -msgid "invalid string in message" -msgstr "訊息中有不合法的字串" - -# libpq/pqformat.c:687 -#: libpq/pqformat.c:687 -msgid "invalid message format" -msgstr "不合法的訊息格式" - -# main/main.c:99 -#: main/main.c:99 -#, c-format -msgid "%s: setsysinfo failed: %s\n" -msgstr "%s：setsysinfo失敗：%s\n" - -# main/main.c:117 -#: main/main.c:117 -#, c-format -msgid "%s: WSAStartup failed: %d\n" -msgstr "%s：WSAStartup失敗：%d\n" - -# main/main.c:220 -#: main/main.c:217 -msgid "" -"\"root\" execution of the PostgreSQL server is not permitted.\n" -"The server must be started under an unprivileged user ID to prevent\n" -"possible system security compromise. See the documentation for\n" -"more information on how to properly start the server.\n" -msgstr "" -"禁止以\"root\"執行PostgreSQL伺服器。\n" -"伺服器必須以非特權使用者身分啟動以避免可能的\n" -"系統安全問題，請參考說明文件以獲得有關如何正\n" -"確啟動伺服器的資訊。\n" - -# main/main.c:239 -#: main/main.c:236 -#, c-format -msgid "%s: real and effective user IDs must match\n" -msgstr "%s：真實使用者ID和有效使用者ID必須符合\n" - -# main/main.c:246 -#: main/main.c:243 -msgid "" -"Execution of PostgreSQL by a user with administrative permissions is not\n" -"permitted.\n" -"The server must be started under an unprivileged user ID to prevent\n" -"possible system security compromises. See the documentation for\n" -"more information on how to properly start the server.\n" -msgstr "" -"禁止以擁有系統管理者權限的使用者執行PostgreSQL。\n" -"伺服器必須以非特權使用者身分啟動以避免可能的系統\n" -"安全問題，請參考說明文件以獲得有關如何正確啟動伺\n" -"服器的資訊。\n" - -# main/main.c:306 -#: main/main.c:314 -#, c-format -msgid "%s: invalid effective UID: %d\n" -msgstr "%s：不合法的effective UID：%d\n" - -# main/main.c:319 -#: main/main.c:327 -#, c-format -msgid "%s: could not determine user name (GetUserName failed)\n" -msgstr "%s: 無法判斷使用者名稱 (GetUserName 失敗)\n" - -# nodes/params.c:114 -#: nodes/params.c:114 -#, c-format -msgid "no value found for parameter \"%s\"" -msgstr "未發現參數 \"%s\" 的值" - -# nodes/params.c:119 -#: nodes/params.c:119 -#, c-format -msgid "no value found for parameter %d" -msgstr "未發現參數 %d 的值" - -# optimizer/path/allpaths.c:223 -#: optimizer/path/allpaths.c:223 -msgid "SELECT FOR UPDATE is not supported for inheritance queries" -msgstr "" - -# optimizer/plan/initsplan.c:282 optimizer/prep/prepjointree.c:366 -#: optimizer/plan/initsplan.c:282 optimizer/prep/prepjointree.c:366 -msgid "UNION JOIN is not implemented" -msgstr "UNION JOIN尚未實做" - -# optimizer/plan/initsplan.c:339 -#: optimizer/plan/initsplan.c:339 -msgid "" -"SELECT FOR UPDATE cannot be applied to the nullable side of an outer join" -msgstr "" - -# optimizer/plan/initsplan.c:743 -#: optimizer/plan/initsplan.c:743 -#, c-format -msgid "could not identify an equality operator for types %s and %s" -msgstr "" - -# optimizer/plan/initsplan.c:756 -#: optimizer/plan/initsplan.c:756 -#, c-format -msgid "" -"equality operator for types %s and %s should be merge-joinable, but isn't" -msgstr "" - -# optimizer/plan/planner.c:641 parser/analyze.c:1933 parser/analyze.c:2099 -# parser/analyze.c:2706 -#: optimizer/plan/planner.c:641 parser/analyze.c:1945 parser/analyze.c:2111 -#: parser/analyze.c:2718 -msgid "SELECT FOR UPDATE is not allowed with UNION/INTERSECT/EXCEPT" -msgstr "" - -# optimizer/plan/planner.c:698 -#: optimizer/plan/planner.c:698 -msgid "SELECT FOR UPDATE is not allowed in subqueries" -msgstr "子查詢不能使用SELECT FOR UPDATE" - -# optimizer/util/clauses.c:2296 -#: optimizer/util/clauses.c:2348 -#, c-format -msgid "SQL function \"%s\" during inlining" -msgstr "" - -# parser/parse_clause.c:363 -#: parser/parse_clause.c:363 -#, c-format -msgid "JOIN/ON clause refers to \"%s\", which is not part of JOIN" -msgstr "" - -# gram.y:5166 parser/parse_clause.c:423 -#: gram.y:5161 parser/parse_clause.c:423 -msgid "subquery in FROM must have an alias" -msgstr "FROM中的子查詢要有別名" - -# parser/parse_clause.c:446 -#: parser/parse_clause.c:446 -msgid "subquery in FROM may not have SELECT INTO" -msgstr "FROM中的子查詢不能有SELECT INTO" - -# parser/parse_clause.c:468 -#: parser/parse_clause.c:468 -msgid "subquery in FROM may not refer to other relations of same query level" -msgstr "" - -# parser/parse_clause.c:527 -#: parser/parse_clause.c:527 -msgid "" -"function expression in FROM may not refer to other relations of same query " -"level" -msgstr "" - -# parser/parse_clause.c:539 -#: parser/parse_clause.c:539 -msgid "cannot use aggregate function in function expression in FROM" -msgstr "" - -# parser/parse_clause.c:759 -#: parser/parse_clause.c:759 -#, c-format -msgid "column name \"%s\" appears more than once in USING clause" -msgstr "" - -# parser/parse_clause.c:774 -#: parser/parse_clause.c:774 -#, c-format -msgid "common column name \"%s\" appears more than once in left table" -msgstr "" - -# parser/parse_clause.c:783 -#: parser/parse_clause.c:783 -#, c-format -msgid "column \"%s\" specified in USING clause does not exist in left table" -msgstr "" - -# parser/parse_clause.c:797 -#: parser/parse_clause.c:797 -#, c-format -msgid "common column name \"%s\" appears more than once in right table" -msgstr "" - -# parser/parse_clause.c:806 -#: parser/parse_clause.c:806 -#, c-format -msgid "column \"%s\" specified in USING clause does not exist in right table" -msgstr "" - -# parser/parse_clause.c:858 -#: parser/parse_clause.c:858 -#, c-format -msgid "column alias list for \"%s\" has too many entries" -msgstr "" - -# parser/parse_clause.c:1051 -#. translator: %s is name of a SQL construct, eg LIMIT -#: parser/parse_clause.c:1051 -#, c-format -msgid "argument of %s must not contain variables" -msgstr "" - -# parser/parse_clause.c:1059 -#. translator: %s is name of a SQL construct, eg LIMIT -#: parser/parse_clause.c:1059 -#, c-format -msgid "argument of %s must not contain aggregates" -msgstr "" - -# translator: %s is name of a SQL construct, eg LIMIT -# parser/parse_clause.c:1067 -#. translator: %s is name of a SQL construct, eg LIMIT -#: parser/parse_clause.c:1067 -#, c-format -msgid "argument of %s must not contain subqueries" -msgstr "" - -# translator: first %s is name of a SQL construct, eg ORDER BY -# parser/parse_clause.c:1179 -#: parser/parse_clause.c:1179 -#, c-format -msgid "%s \"%s\" is ambiguous" -msgstr "" - -# translator: %s is name of a SQL construct, eg ORDER BY -# parser/parse_clause.c:1201 -#. translator: %s is name of a SQL construct, eg ORDER BY -#: parser/parse_clause.c:1201 -#, c-format -msgid "non-integer constant in %s" -msgstr "" - -# parser/parse_clause.c:1218 -#. translator: %s is name of a SQL construct, eg ORDER BY -#: parser/parse_clause.c:1218 -#, c-format -msgid "%s position %d is not in select list" -msgstr "" - -# parser/parse_clause.c:1411 -#: parser/parse_clause.c:1411 -msgid "for SELECT DISTINCT, ORDER BY expressions must appear in select list" -msgstr "" - -# parser/parse_clause.c:1451 -#: parser/parse_clause.c:1451 -msgid "SELECT DISTINCT ON expressions must match initial ORDER BY expressions" -msgstr "" - -# catalog/heap.c:382 commands/tablecmds.c:2897 -#: parser/analyze.c:408 -#, c-format -msgid "target lists can have at most %d entries" -msgstr "目標列表最多可以有 %d 個項目" - -# parser/analyze.c:446 -#: parser/analyze.c:458 -msgid "CREATE VIEW specifies more column names than columns" -msgstr "" - -# parser/analyze.c:583 -#: parser/analyze.c:595 -msgid "INSERT ... SELECT may not specify INTO" -msgstr "" - -# parser/analyze.c:671 -#: parser/analyze.c:683 -msgid "INSERT has more expressions than target columns" -msgstr "" - -# parser/analyze.c:692 -#: parser/analyze.c:704 -msgid "INSERT has more target columns than expressions" -msgstr "" - -# parser/analyze.c:865 -#: parser/analyze.c:877 -#, c-format -msgid "%s will create implicit sequence \"%s\" for serial column \"%s.%s\"" -msgstr "" - -# parser/analyze.c:948 parser/analyze.c:958 -#: parser/analyze.c:960 parser/analyze.c:970 -#, c-format -msgid "" -"conflicting NULL/NOT NULL declarations for column \"%s\" of table \"%s\"" -msgstr "" - -# parser/analyze.c:968 -#: parser/analyze.c:980 -#, c-format -msgid "multiple default values specified for column \"%s\" of table \"%s\"" -msgstr "" - -# parser/analyze.c:1311 -#: parser/analyze.c:1323 -#, c-format -msgid "column \"%s\" appears twice in primary key constraint" -msgstr "欄位\"%s\"在主鍵constraint出現兩次" - -# parser/analyze.c:1316 -#: parser/analyze.c:1328 -#, c-format -msgid "column \"%s\" appears twice in unique constraint" -msgstr "欄位\"%s\"在unique constraint出現兩次" - -# parser/analyze.c:1499 -#: parser/analyze.c:1511 -msgid "index expression may not return a set" -msgstr "" - -# parser/analyze.c:1591 -#: parser/analyze.c:1603 -msgid "rule WHERE condition may not contain references to other relations" -msgstr "" - -# parser/analyze.c:1597 -#: parser/analyze.c:1609 -msgid "rule WHERE condition may not contain aggregate functions" -msgstr "" - -# parser/analyze.c:1668 -#: parser/analyze.c:1680 -msgid "" -"rules with WHERE conditions may only have SELECT, INSERT, UPDATE, or DELETE " -"actions" -msgstr "" - -# parser/analyze.c:1687 parser/analyze.c:1759 rewrite/rewriteHandler.c:177 -# rewrite/rewriteManip.c:749 rewrite/rewriteManip.c:805 -#: parser/analyze.c:1699 parser/analyze.c:1771 rewrite/rewriteHandler.c:177 -#: rewrite/rewriteManip.c:749 rewrite/rewriteManip.c:805 -msgid "conditional UNION/INTERSECT/EXCEPT statements are not implemented" -msgstr "" - -# parser/analyze.c:1705 -#: parser/analyze.c:1717 -msgid "ON SELECT rule may not use OLD" -msgstr "ON SELECT規則不能使用OLD" - -# parser/analyze.c:1709 -#: parser/analyze.c:1721 -msgid "ON SELECT rule may not use NEW" -msgstr "ON SELECT規則不能使用NEW" - -# parser/analyze.c:1718 -#: parser/analyze.c:1730 -msgid "ON INSERT rule may not use OLD" -msgstr "ON INSERT規則不能使用OLD" - -# parser/analyze.c:1724 -#: parser/analyze.c:1736 -msgid "ON DELETE rule may not use NEW" -msgstr "ON DELETE規則不能使用NEW" - -# parser/analyze.c:2056 -#: parser/analyze.c:2068 -msgid "" -"ORDER BY on a UNION/INTERSECT/EXCEPT result must be on one of the result " -"columns" -msgstr "" - -# parser/analyze.c:2094 -#: parser/analyze.c:2106 -msgid "INTO is only allowed on first SELECT of UNION/INTERSECT/EXCEPT" -msgstr "" - -# parser/analyze.c:2155 -#: parser/analyze.c:2167 -msgid "" -"UNION/INTERSECT/EXCEPT member statement may not refer to other relations of " -"same query level" -msgstr "" - -# parser/analyze.c:2210 -#: parser/analyze.c:2222 -#, c-format -msgid "each %s query must have the same number of columns" -msgstr "" - -# parser/analyze.c:2282 -#: parser/analyze.c:2294 -msgid "CREATE TABLE AS specifies too many column names" -msgstr "" - -# parser/analyze.c:2565 -#: parser/analyze.c:2577 -msgid "cannot specify both SCROLL and NO SCROLL" -msgstr "" - -# parser/analyze.c:2652 -#: parser/analyze.c:2664 -#, c-format -msgid "wrong number of parameters for prepared statement \"%s\"" -msgstr "" - -# parser/analyze.c:2654 -#: parser/analyze.c:2666 -#, c-format -msgid "Expected %d parameters but got %d." -msgstr "預期%d個參數，但是收到%d個。" - -# parser/analyze.c:2669 -#: parser/analyze.c:2681 -msgid "cannot use subquery in EXECUTE parameter" -msgstr "" - -# parser/analyze.c:2673 -#: parser/analyze.c:2685 -msgid "cannot use aggregate function in EXECUTE parameter" -msgstr "" - -# parser/analyze.c:2685 -#: parser/analyze.c:2697 -#, c-format -msgid "parameter $%d of type %s cannot be coerced to the expected type %s" -msgstr "" - -# parser/analyze.c:2710 -#: parser/analyze.c:2722 -msgid "SELECT FOR UPDATE is not allowed with DISTINCT clause" -msgstr "" - -# parser/analyze.c:2714 -#: parser/analyze.c:2726 -msgid "SELECT FOR UPDATE is not allowed with GROUP BY clause" -msgstr "" - -# parser/analyze.c:2718 -#: parser/analyze.c:2730 -msgid "SELECT FOR UPDATE is not allowed with aggregate functions" -msgstr "" - -# parser/analyze.c:2800 -#: parser/analyze.c:2812 -msgid "SELECT FOR UPDATE cannot be applied to a join" -msgstr "" - -# parser/analyze.c:2805 -#: parser/analyze.c:2817 -msgid "SELECT FOR UPDATE cannot be applied to NEW or OLD" -msgstr "" - -# parser/analyze.c:2810 -#: parser/analyze.c:2822 -msgid "SELECT FOR UPDATE cannot be applied to a function" -msgstr "" - -# parser/analyze.c:2823 -#: parser/analyze.c:2835 -#, c-format -msgid "relation \"%s\" in FOR UPDATE clause not found in FROM clause" -msgstr "" - -# parser/analyze.c:2870 -#: parser/analyze.c:2882 -msgid "misplaced DEFERRABLE clause" -msgstr "" - -# parser/analyze.c:2874 parser/analyze.c:2887 -#: parser/analyze.c:2886 parser/analyze.c:2899 -msgid "multiple DEFERRABLE/NOT DEFERRABLE clauses not allowed" -msgstr "" - -# parser/analyze.c:2883 -#: parser/analyze.c:2895 -msgid "misplaced NOT DEFERRABLE clause" -msgstr "" - -# gram.y:2369 gram.y:2384 parser/analyze.c:2894 parser/analyze.c:2918 -#: gram.y:2368 gram.y:2383 parser/analyze.c:2906 parser/analyze.c:2930 -msgid "constraint declared INITIALLY DEFERRED must be DEFERRABLE" -msgstr "" - -# parser/analyze.c:2901 -#: parser/analyze.c:2913 -msgid "misplaced INITIALLY DEFERRED clause" -msgstr "" - -# parser/analyze.c:2905 parser/analyze.c:2929 -#: parser/analyze.c:2917 parser/analyze.c:2941 -msgid "multiple INITIALLY IMMEDIATE/DEFERRED clauses not allowed" -msgstr "" - -# parser/analyze.c:2925 -#: parser/analyze.c:2937 -msgid "misplaced INITIALLY IMMEDIATE clause" -msgstr "" - -# parser/analyze.c:2978 -#: parser/analyze.c:2990 -#, c-format -msgid "" -"CREATE specifies a schema (%s) different from the one being created (%s)" -msgstr "" - -# parser/analyze.c:3132 parser/parse_coerce.c:221 parser/parse_expr.c:116 -# parser/parse_expr.c:122 -#: parser/analyze.c:3144 parser/parse_coerce.c:221 parser/parse_expr.c:116 -#: parser/parse_expr.c:122 -#, c-format -msgid "there is no parameter $%d" -msgstr "並沒有參數 $%d" - -# parser/analyze.c:3137 tcop/postgres.c:1194 -#: parser/analyze.c:3149 tcop/postgres.c:1204 -#, c-format -msgid "could not determine data type of parameter $%d" -msgstr "" - -# scan.l:312 -#: scan.l:312 -msgid "unterminated /* comment" -msgstr "未結束的 /* 註解" - -# scan.l:339 -#: scan.l:339 -msgid "unterminated bit string literal" -msgstr "未結束的位元字串實量" - -# scan.l:358 -#: scan.l:358 -msgid "unterminated hexadecimal string literal" -msgstr "未結束的十六進位字串實量" - -# scan.l:407 -#: scan.l:407 -msgid "unterminated quoted string" -msgstr "未結束的引號字串" - -# scan.l:441 -#: scan.l:441 -msgid "unterminated dollar-quoted string" -msgstr "" - -# scan.l:453 -#: scan.l:453 -msgid "zero-length delimited identifier" -msgstr "" - -# scan.l:466 -#: scan.l:466 -msgid "unterminated quoted identifier" -msgstr "" - -# translator: %s is typically "syntax error" -# scan.l:621 -#. translator: %s is typically "syntax error" -#: scan.l:621 -#, c-format -msgid "%s at end of input" -msgstr "在輸入末端發生 %s" - -# translator: first %s is typically "syntax error" -# scan.l:629 -#. translator: first %s is typically "syntax error" -#: scan.l:629 -#, c-format -msgid "%s at or near \"%s\"" -msgstr "在\"%s\"附近發生 %s" - -# parser/parse_agg.c:120 -#: parser/parse_agg.c:120 -msgid "aggregates not allowed in WHERE clause" -msgstr "" - -# parser/parse_agg.c:124 -#: parser/parse_agg.c:124 -msgid "aggregates not allowed in JOIN conditions" -msgstr "" - -# parser/parse_agg.c:143 -#: parser/parse_agg.c:143 -msgid "aggregates not allowed in GROUP BY clause" -msgstr "" - -# parser/parse_agg.c:316 -#: parser/parse_agg.c:316 -#, c-format -msgid "" -"column \"%s.%s\" must appear in the GROUP BY clause or be used in an " -"aggregate function" -msgstr "" - -# parser/parse_agg.c:321 -#: parser/parse_agg.c:321 -#, c-format -msgid "subquery uses ungrouped column \"%s.%s\" from outer query" -msgstr "" - -# parser/parse_relation.c:174 parser/parse_relation.c:189 -#: parser/parse_relation.c:174 parser/parse_relation.c:189 -#, c-format -msgid "table reference \"%s\" is ambiguous" -msgstr "" - -# parser/parse_relation.c:249 parser/parse_relation.c:264 -#: parser/parse_relation.c:249 parser/parse_relation.c:264 -#, c-format -msgid "table reference %u is ambiguous" -msgstr "" - -# parser/parse_relation.c:356 parser/parse_relation.c:368 -#: parser/parse_relation.c:356 parser/parse_relation.c:368 -#, c-format -msgid "table name \"%s\" specified more than once" -msgstr "" - -# parser/parse_relation.c:510 parser/parse_relation.c:609 -#: parser/parse_relation.c:510 parser/parse_relation.c:609 -#, c-format -msgid "column reference \"%s\" is ambiguous" -msgstr "" - -# parser/parse_relation.c:726 parser/parse_relation.c:925 -#: parser/parse_relation.c:726 parser/parse_relation.c:925 -#, c-format -msgid "table \"%s\" has %d columns available but %d columns specified" -msgstr "" - -# parser/parse_relation.c:997 -#: parser/parse_relation.c:997 -msgid "" -"a column definition list is only allowed for functions returning \"record\"" -msgstr "" - -# parser/parse_relation.c:1008 -#: parser/parse_relation.c:1008 -msgid "a column definition list is required for functions returning \"record\"" -msgstr "" - -# parser/parse_relation.c:1052 -#: parser/parse_relation.c:1047 -#, c-format -msgid "too many column aliases specified for function %s" -msgstr "" - -# catalog/pg_proc.c:487 -#: parser/parse_relation.c:1071 -#, c-format -msgid "function \"%s\" in FROM has unsupported return type %s" -msgstr "FROM條件使用的函式\"%s\"傳回不受支援的型別%s" - -# parser/parse_relation.c:2009 -#: parser/parse_relation.c:2003 -#, c-format -msgid "missing FROM-clause entry in subquery for table \"%s\"" -msgstr "" - -# parser/parse_relation.c:2014 -#: parser/parse_relation.c:2008 -#, c-format -msgid "missing FROM-clause entry for table \"%s\"" -msgstr "" - -# parser/parse_relation.c:2033 -#: parser/parse_relation.c:2027 -#, c-format -msgid "adding missing FROM-clause entry in subquery for table \"%s\"" -msgstr "" - -# parser/parse_relation.c:2038 -#: parser/parse_relation.c:2032 -#, c-format -msgid "adding missing FROM-clause entry for table \"%s\"" -msgstr "" - -# parser/parse_coerce.c:237 -#: parser/parse_coerce.c:237 -#, c-format -msgid "inconsistent types deduced for parameter $%d" -msgstr "" - -# parser/parse_coerce.c:676 parser/parse_coerce.c:703 -# parser/parse_coerce.c:719 parser/parse_coerce.c:733 -# parser/parse_expr.c:1654 -#: parser/parse_coerce.c:691 parser/parse_coerce.c:718 -#: parser/parse_coerce.c:734 parser/parse_coerce.c:748 -#: parser/parse_expr.c:1654 -#, c-format -msgid "cannot cast type %s to %s" -msgstr "無法將型別 %s 轉換成 %s" - -# parser/parse_coerce.c:706 -#: parser/parse_coerce.c:721 -msgid "Input has too few columns." -msgstr "輸入的欄位不足。" - -# parser/parse_coerce.c:722 -#: parser/parse_coerce.c:737 -#, c-format -msgid "Cannot cast type %s to %s in column %d." -msgstr "" - -# parser/parse_coerce.c:736 -#: parser/parse_coerce.c:751 -msgid "Input has too many columns." -msgstr "輸入的欄位過多。" - -# translator: first %s is name of a SQL construct, eg WHERE -# parser/parse_coerce.c:770 -#. translator: first %s is name of a SQL construct, eg WHERE -#: parser/parse_coerce.c:785 -#, c-format -msgid "argument of %s must be type boolean, not type %s" -msgstr "%s 的引數必須是boolean型別，而非%s型別" - -# translator: %s is name of a SQL construct, eg WHERE -# parser/parse_coerce.c:778 parser/parse_coerce.c:817 -#. translator: %s is name of a SQL construct, eg WHERE -#: parser/parse_coerce.c:793 parser/parse_coerce.c:832 -#, c-format -msgid "argument of %s must not return a set" -msgstr "%s 的引數不能傳回set" - -# translator: first %s is name of a SQL construct, eg LIMIT -# parser/parse_coerce.c:809 -#. translator: first %s is name of a SQL construct, eg LIMIT -#: parser/parse_coerce.c:824 -#, c-format -msgid "argument of %s must be type integer, not type %s" -msgstr "%s 的引數必須是integer型別，而非%s型別" - -# parser/parse_coerce.c:871 -#: parser/parse_coerce.c:886 -#, c-format -msgid "%s types %s and %s cannot be matched" -msgstr "" - -# translator: first %s is name of a SQL construct, eg CASE -# parser/parse_coerce.c:933 -#. translator: first %s is name of a SQL construct, eg CASE -#: parser/parse_coerce.c:948 -#, c-format -msgid "%s could not convert type %s to %s" -msgstr "%s 無法將型別 %s 轉換成 %s" - -# parser/parse_coerce.c:1109 -#: parser/parse_coerce.c:1124 -msgid "arguments declared \"anyelement\" are not all alike" -msgstr "" - -# parser/parse_coerce.c:1126 -#: parser/parse_coerce.c:1141 -msgid "arguments declared \"anyarray\" are not all alike" -msgstr "" - -# parser/parse_coerce.c:1155 parser/parse_coerce.c:1267 -# parser/parse_coerce.c:1294 -#: parser/parse_coerce.c:1170 parser/parse_coerce.c:1282 -#: parser/parse_coerce.c:1309 -#, c-format -msgid "argument declared \"anyarray\" is not an array but type %s" -msgstr "" - -# parser/parse_coerce.c:1172 -#: parser/parse_coerce.c:1187 -msgid "" -"argument declared \"anyarray\" is not consistent with argument declared " -"\"anyelement\"" -msgstr "" - -# parser/parse_coerce.c:1183 -#: parser/parse_coerce.c:1198 -msgid "" -"could not determine anyarray/anyelement type because input has type \"unknown" -"\"" -msgstr "" - -# parser/parse_coerce.c:1208 parser/parse_coerce.c:1225 -# parser/parse_coerce.c:1279 parser/parse_expr.c:794 parser/parse_expr.c:1350 -# parser/parse_expr.c:1389 parser/parse_oper.c:920 -#: parser/parse_coerce.c:1223 parser/parse_coerce.c:1240 -#: parser/parse_coerce.c:1294 parser/parse_expr.c:794 parser/parse_expr.c:1350 -#: parser/parse_expr.c:1389 parser/parse_oper.c:920 -#, c-format -msgid "could not find array type for data type %s" -msgstr "" - -# parser/parse_expr.c:361 -#: parser/parse_expr.c:361 -msgid "NULLIF requires = operator to yield boolean" -msgstr "" - -# parser/parse_expr.c:486 -#: parser/parse_expr.c:486 -msgid "subquery must return a column" -msgstr "子查婢必須傳回一個欄位" - -# parser/parse_expr.c:492 -#: parser/parse_expr.c:492 -msgid "subquery must return only one column" -msgstr "子查詢只能傳回一個欄位" - -# parser/parse_expr.c:549 -#: parser/parse_expr.c:549 -#, c-format -msgid "row comparison cannot use operator %s" -msgstr "記錄比較不能使用operator %s" - -# parser/parse_expr.c:576 -#: parser/parse_expr.c:576 -msgid "subquery has too many columns" -msgstr "子查詢的欄位太多" - -# parser/parse_expr.c:594 -#: parser/parse_expr.c:594 -#, c-format -msgid "operator %s must return type boolean, not type %s" -msgstr "operator %s必須傳回boolean型別，而非 %s 型別" - -# parser/parse_expr.c:597 parser/parse_expr.c:604 -#: parser/parse_expr.c:597 parser/parse_expr.c:604 -msgid "" -"The operator of a quantified predicate subquery must return type boolean." -msgstr "" - -# parser/parse_expr.c:602 -#: parser/parse_expr.c:602 -#, c-format -msgid "operator %s must not return a set" -msgstr "operator %s不能傳回set" - -# parser/parse_expr.c:614 -#: parser/parse_expr.c:614 -msgid "subquery has too few columns" -msgstr "子查詢的欄位不足" - -# parser/parse_expr.c:1688 parser/parse_expr.c:1767 -#: parser/parse_expr.c:1688 parser/parse_expr.c:1767 -msgid "unequal number of entries in row expression" -msgstr "" - -# parser/parse_expr.c:1709 -#: parser/parse_expr.c:1709 -#, c-format -msgid "operator %s is not supported for row expressions" -msgstr "" - -# parser/parse_expr.c:1804 -#: parser/parse_expr.c:1804 -msgid "IS DISTINCT FROM requires = operator to yield boolean" -msgstr "" - -# parser/parse_func.c:88 -#: parser/parse_func.c:88 -#, c-format -msgid "cannot pass more than %d arguments to a function" -msgstr "傳入函式的引數不能超過 %d 個" - -# parser/parse_func.c:165 -#: parser/parse_func.c:165 -#, c-format -msgid "%s(*) specified, but %s is not an aggregate function" -msgstr "%s(*)被使用，但是 %s 不是aggregate function" - -# parser/parse_func.c:171 -#: parser/parse_func.c:171 -#, c-format -msgid "DISTINCT specified, but %s is not an aggregate function" -msgstr "" - -# parser/parse_func.c:195 -#: parser/parse_func.c:195 -#, c-format -msgid "function %s is not unique" -msgstr "" - -# parser/parse_func.c:198 -#: parser/parse_func.c:198 -msgid "" -"Could not choose a best candidate function. You may need to add explicit " -"type casts." -msgstr "" - -# parser/parse_func.c:206 -#: parser/parse_func.c:206 -msgid "" -"No function matches the given name and argument types. You may need to add " -"explicit type casts." -msgstr "" - -# parser/parse_func.c:255 -#: parser/parse_func.c:255 -msgid "aggregates may not return sets" -msgstr "aggregates不能傳回sets" - -# parser/parse_func.c:1208 -#: parser/parse_func.c:1208 -#, c-format -msgid "column %s.%s does not exist" -msgstr "欄位 %s.%s 不存在" - -# parser/parse_func.c:1219 parser/parse_target.c:496 -#: parser/parse_func.c:1219 -#, c-format -msgid "column \"%s\" not found in data type %s" -msgstr "" - -# parser/parse_func.c:1224 -#: parser/parse_func.c:1224 -#, c-format -msgid "could not identify column \"%s\" in record data type" -msgstr "" - -# parser/parse_func.c:1229 -#: parser/parse_func.c:1229 -#, c-format -msgid "column notation .%s applied to type %s, which is not a composite type" -msgstr "" - -# parser/parse_func.c:1301 -#: parser/parse_func.c:1301 -#, c-format -msgid "aggregate %s(*) does not exist" -msgstr "aggregate %s(*)不存在" - -# parser/parse_func.c:1306 -#: parser/parse_func.c:1306 -#, c-format -msgid "aggregate %s(%s) does not exist" -msgstr "aggregate %s(%s)不存在" - -# parser/parse_func.c:1327 -#: parser/parse_func.c:1327 -#, c-format -msgid "function %s(%s) is not an aggregate" -msgstr "函式%s(%s)不是aggregate" - -# parser/parse_node.c:95 -#: parser/parse_node.c:95 -#, c-format -msgid "cannot subscript type %s because it is not an array" -msgstr "" - -# parser/parse_node.c:198 parser/parse_node.c:221 -#: parser/parse_node.c:198 parser/parse_node.c:221 -msgid "array subscript must have type integer" -msgstr "" - -# parser/parse_node.c:243 -#: parser/parse_node.c:243 -#, c-format -msgid "array assignment requires type %s but expression is of type %s" -msgstr "" - -# parser/parse_oper.c:84 parser/parse_oper.c:785 utils/adt/regproc.c:467 -# utils/adt/regproc.c:487 utils/adt/regproc.c:665 -#: parser/parse_oper.c:84 parser/parse_oper.c:785 utils/adt/regproc.c:467 -#: utils/adt/regproc.c:487 utils/adt/regproc.c:665 -#, c-format -msgid "operator does not exist: %s" -msgstr "operator不存在：%s" - -# parser/parse_oper.c:185 utils/adt/arrayfuncs.c:2581 -# utils/adt/ri_triggers.c:3641 -#: parser/parse_oper.c:185 utils/adt/arrayfuncs.c:2581 -#: utils/adt/ri_triggers.c:3642 -#, c-format -msgid "could not identify an equality operator for type %s" -msgstr "" - -# parser/parse_oper.c:249 parser/parse_oper.c:314 -#: parser/parse_oper.c:249 parser/parse_oper.c:314 -#, c-format -msgid "could not identify an ordering operator for type %s" -msgstr "" - -# parser/parse_oper.c:251 parser/parse_oper.c:316 -#: parser/parse_oper.c:251 parser/parse_oper.c:316 -msgid "Use an explicit ordering operator or modify the query." -msgstr "" - -# parser/parse_oper.c:584 -#: parser/parse_oper.c:584 -#, c-format -msgid "operator requires run-time type coercion: %s" -msgstr "" - -# parser/parse_oper.c:778 -#: parser/parse_oper.c:778 -#, c-format -msgid "operator is not unique: %s" -msgstr "" - -# parser/parse_oper.c:780 -#: parser/parse_oper.c:780 -msgid "" -"Could not choose a best candidate operator. You may need to add explicit " -"type casts." -msgstr "" - -# parser/parse_oper.c:787 -#: parser/parse_oper.c:787 -msgid "" -"No operator matches the given name and argument type(s). You may need to add " -"explicit type casts." -msgstr "" - -# parser/parse_oper.c:877 -#: parser/parse_oper.c:877 -msgid "op ANY/ALL (array) requires array on right side" -msgstr "" - -# parser/parse_oper.c:906 -#: parser/parse_oper.c:906 -msgid "op ANY/ALL (array) requires operator to yield boolean" -msgstr "" - -# parser/parse_oper.c:910 -#: parser/parse_oper.c:910 -msgid "op ANY/ALL (array) requires operator not to return a set" -msgstr "" - -# parser/parse_target.c:268 parser/parse_target.c:501 -#: parser/parse_target.c:268 parser/parse_target.c:503 -#, c-format -msgid "cannot assign to system column \"%s\"" -msgstr "" - -# parser/parse_target.c:292 -#: parser/parse_target.c:292 -msgid "cannot set an array element to DEFAULT" -msgstr "" - -# parser/parse_target.c:296 -#: parser/parse_target.c:296 -msgid "cannot set a subfield to DEFAULT" -msgstr "" - -# parser/parse_target.c:357 -#: parser/parse_target.c:357 -#, c-format -msgid "column \"%s\" is of type %s but expression is of type %s" -msgstr "" - -#: parser/parse_target.c:489 -#, c-format -msgid "" -"cannot assign to field \"%s\" of column \"%s\" because its type %s is not a " -"composite type" -msgstr "" - -#: parser/parse_target.c:497 -#, c-format -msgid "" -"cannot assign to field \"%s\" of column \"%s\" because there is no such " -"column in data type %s" -msgstr "" - -# parser/parse_target.c:565 -#: parser/parse_target.c:567 -#, c-format -msgid "" -"array assignment to \"%s\" requires type %s but expression is of type %s" -msgstr "" - -# parser/parse_target.c:574 -#: parser/parse_target.c:576 -#, c-format -msgid "subfield \"%s\" is of type %s but expression is of type %s" -msgstr "" - -# parser/parse_target.c:803 -#: parser/parse_target.c:805 -msgid "SELECT * with no tables specified is not valid" -msgstr "" - -# y.tab.c:9591 -#: y.tab.c:9499 -msgid "syntax error: cannot back up" -msgstr "" - -# gram.y:990 gram.y:1016 -#: gram.y:989 gram.y:1015 -msgid "time zone interval must be HOUR or HOUR TO MINUTE" -msgstr "time zone interval必須是HOUR或HOUR TO MINUTE" - -# gram.y:1001 gram.y:5474 gram.y:7537 -#: gram.y:1000 gram.y:5469 gram.y:7540 -#, c-format -msgid "INTERVAL(%d) precision must not be negative" -msgstr "" - -# gram.y:1007 gram.y:5480 gram.y:7543 -#: gram.y:1006 gram.y:5475 gram.y:7546 -#, c-format -msgid "INTERVAL(%d) precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:1887 utils/adt/ri_triggers.c:301 utils/adt/ri_triggers.c:363 -# utils/adt/ri_triggers.c:542 utils/adt/ri_triggers.c:781 -# utils/adt/ri_triggers.c:972 utils/adt/ri_triggers.c:1133 -# utils/adt/ri_triggers.c:1317 utils/adt/ri_triggers.c:1486 -# utils/adt/ri_triggers.c:1667 utils/adt/ri_triggers.c:1837 -# utils/adt/ri_triggers.c:2055 utils/adt/ri_triggers.c:2235 -# utils/adt/ri_triggers.c:2440 utils/adt/ri_triggers.c:2536 -# utils/adt/ri_triggers.c:2659 -#: gram.y:1886 utils/adt/ri_triggers.c:302 utils/adt/ri_triggers.c:364 -#: utils/adt/ri_triggers.c:543 utils/adt/ri_triggers.c:782 -#: utils/adt/ri_triggers.c:973 utils/adt/ri_triggers.c:1134 -#: utils/adt/ri_triggers.c:1318 utils/adt/ri_triggers.c:1487 -#: utils/adt/ri_triggers.c:1668 utils/adt/ri_triggers.c:1838 -#: utils/adt/ri_triggers.c:2056 utils/adt/ri_triggers.c:2236 -#: utils/adt/ri_triggers.c:2441 utils/adt/ri_triggers.c:2537 -#: utils/adt/ri_triggers.c:2660 -msgid "MATCH PARTIAL not yet implemented" -msgstr "MATCH PARTIAL尚未實做" - -# gram.y:1977 -#: gram.y:1976 -msgid "CREATE TABLE AS may not specify INTO" -msgstr "" - -# gram.y:2436 -#: gram.y:2435 -msgid "CREATE ASSERTION is not yet implemented" -msgstr "CREATE ASSERTION尚未實做" - -# gram.y:2452 -#: gram.y:2451 -msgid "DROP ASSERTION is not yet implemented" -msgstr "DROP ASSERTION尚未實做" - -# gram.y:3328 -#: gram.y:3323 -msgid "CREATE FUNCTION / OUT parameters are not implemented" -msgstr "" - -# gram.y:3335 -#: gram.y:3330 -msgid "CREATE FUNCTION / INOUT parameters are not implemented" -msgstr "" - -# gram.y:3496 utils/adt/regproc.c:639 -#: gram.y:3491 utils/adt/regproc.c:639 -msgid "missing argument" -msgstr "缺少引數" - -# gram.y:3497 utils/adt/regproc.c:640 -#: gram.y:3492 utils/adt/regproc.c:640 -msgid "Use NONE to denote the missing argument of a unary operator." -msgstr "" - -# gram.y:4545 -#: gram.y:4540 -msgid "column name list not allowed in CREATE TABLE / AS EXECUTE" -msgstr "" - -# gram.y:5016 -#: gram.y:5011 -msgid "LIMIT #,# syntax is not supported" -msgstr "LIMIT #,# 語法不被支援" - -# gram.y:5017 -#: gram.y:5012 -msgid "Use separate LIMIT and OFFSET clauses." -msgstr "" - -# gram.y:5167 -#: gram.y:5162 -msgid "For example, FROM (SELECT ...) [AS] foo." -msgstr "" - -# gram.y:5577 -#: gram.y:5572 -msgid "precision for type float must be at least 1 bit" -msgstr "float型別的精確度至少要有1個位元" - -# gram.y:5585 -#: gram.y:5580 -msgid "precision for type float must be less than 54 bits" -msgstr "float型別的精確度不能少於54個位元" - -# gram.y:5599 gram.y:5614 -#: gram.y:5594 gram.y:5609 -#, c-format -msgid "NUMERIC precision %d must be between 1 and %d" -msgstr "NUMERIC的精確度%d必須在1和%d之間" - -# gram.y:5604 -#: gram.y:5599 -#, c-format -msgid "NUMERIC scale %d must be between 0 and precision %d" -msgstr "" - -# gram.y:5632 gram.y:5647 -#: gram.y:5627 gram.y:5642 -#, c-format -msgid "DECIMAL precision %d must be between 1 and %d" -msgstr "DECIMAL的精確度%d必須在1和%d之間" - -# gram.y:5637 -#: gram.y:5632 -#, c-format -msgid "DECIMAL scale %d must be between 0 and precision %d" -msgstr "" - -# gram.y:5697 gram.y:5775 -#: gram.y:5692 gram.y:5770 -#, c-format -msgid "length for type %s must be at least 1" -msgstr "%s 型別的長度必須至少為1" - -# gram.y:5702 gram.y:5780 -#: gram.y:5697 gram.y:5775 -#, c-format -msgid "length for type %s cannot exceed %d" -msgstr "%s 型別的長度不能超過 %d" - -# gram.y:5853 -#: gram.y:5848 -#, c-format -msgid "TIMESTAMP(%d)%s precision must not be negative" -msgstr "" - -# gram.y:5859 -#: gram.y:5854 -#, c-format -msgid "TIMESTAMP(%d)%s precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:5894 -#: gram.y:5889 -#, c-format -msgid "TIME(%d)%s precision must not be negative" -msgstr "" - -# gram.y:5900 -#: gram.y:5895 -#, c-format -msgid "TIME(%d)%s precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:6354 -#: gram.y:6349 -msgid "UNIQUE predicate is not yet implemented" -msgstr "" - -# gram.y:6637 -#: gram.y:6632 -#, c-format -msgid "CURRENT_TIME(%d) precision must not be negative" -msgstr "" - -# gram.y:6643 -#: gram.y:6638 -#, c-format -msgid "CURRENT_TIME(%d) precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:6691 -#: gram.y:6686 -#, c-format -msgid "CURRENT_TIMESTAMP(%d) precision must not be negative" -msgstr "" - -# gram.y:6697 -#: gram.y:6692 -#, c-format -msgid "CURRENT_TIMESTAMP(%d) precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:6744 -#: gram.y:6739 -#, c-format -msgid "LOCALTIME(%d) precision must not be negative" -msgstr "" - -# gram.y:6750 -#: gram.y:6745 -#, c-format -msgid "LOCALTIME(%d) precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:6798 -#: gram.y:6793 -#, c-format -msgid "LOCALTIMESTAMP(%d) precision must not be negative" -msgstr "" - -# gram.y:6804 -#: gram.y:6799 -#, c-format -msgid "LOCALTIMESTAMP(%d) precision reduced to maximum allowed, %d" -msgstr "" - -# gram.y:7984 -#: gram.y:7987 -msgid "OLD used in query that is not in a rule" -msgstr "" - -# gram.y:7993 -#: gram.y:7996 -msgid "NEW used in query that is not in a rule" -msgstr "" - -# y.tab.c:19171 -#: y.tab.c:19078 -msgid "syntax error; also virtual memory exhausted" -msgstr "" - -# gram.y:8218 gram.y:8220 y.tab.c:19175 -#: gram.y:8221 gram.y:8223 gram.y:8240 gram.y:8242 y.tab.c:19082 -msgid "syntax error" -msgstr "語法錯誤" - -# y.tab.c:19289 -#: y.tab.c:19196 -msgid "parser stack overflow" -msgstr "" - -# gram.y:8192 -#: gram.y:8195 -msgid "wrong number of parameters on left side of OVERLAPS expression" -msgstr "" - -# gram.y:8198 -#: gram.y:8201 -msgid "wrong number of parameters on right side of OVERLAPS expression" -msgstr "" - -# gram.y:8277 -#: gram.y:8299 -msgid "multiple ORDER BY clauses not allowed" -msgstr "" - -# gram.y:8285 -#: gram.y:8307 -msgid "multiple FOR UPDATE clauses not allowed" -msgstr "" - -# gram.y:8293 -#: gram.y:8315 -msgid "multiple OFFSET clauses not allowed" -msgstr "" - -# gram.y:8301 -#: gram.y:8323 -msgid "multiple LIMIT clauses not allowed" -msgstr "" - -# parser/parse_type.c:62 -#: parser/parse_type.c:62 -#, c-format -msgid "improper %%TYPE reference (too few dotted names): %s" -msgstr "" - -# parser/parse_type.c:83 -#: parser/parse_type.c:83 -#, c-format -msgid "improper %%TYPE reference (too many dotted names): %s" -msgstr "" - -# parser/parse_type.c:103 -#: parser/parse_type.c:103 -#, c-format -msgid "type reference %s converted to %s" -msgstr "" - -# parser/parse_type.c:206 parser/parse_type.c:237 utils/cache/typcache.c:155 -#: parser/parse_type.c:206 parser/parse_type.c:237 utils/cache/typcache.c:155 -#, c-format -msgid "type \"%s\" is only a shell" -msgstr "" - -# parser/parse_type.c:372 parser/parse_type.c:467 -#: parser/parse_type.c:372 parser/parse_type.c:467 -#, c-format -msgid "invalid type name \"%s\"" -msgstr "不合法的型別名稱\"%s\"" - -# parser/scansup.c:182 -#: parser/scansup.c:182 -#, c-format -msgid "identifier \"%s\" will be truncated to \"%.*s\"" -msgstr "" - -# port/pg_shmem.c:94 port/sysv_shmem.c:94 -#: port/pg_shmem.c:101 port/sysv_shmem.c:101 -#, c-format -msgid "could not create shared memory segment: %m" -msgstr "無法建立共享記憶區段：%m" - -# port/pg_shmem.c:95 port/sysv_shmem.c:95 -#: port/pg_shmem.c:102 port/sysv_shmem.c:102 -#, c-format -msgid "Failed system call was shmget(key=%lu, size=%u, 0%o)." -msgstr "失敗的系統呼叫是shmget(key=%lu，size=%u，0%o)。" - -# port/pg_shmem.c:99 port/sysv_shmem.c:99 -#: port/pg_shmem.c:106 port/sysv_shmem.c:106 -#, c-format -msgid "" -"This error usually means that PostgreSQL's request for a shared memory " -"segment exceeded your kernel's SHMMAX parameter. You can either reduce the " -"request size or reconfigure the kernel with larger SHMMAX. To reduce the " -"request size (currently %u bytes), reduce PostgreSQL's shared_buffers " -"parameter (currently %d) and/or its max_connections parameter (currently %" -"d).\n" -"If the request size is already small, it's possible that it is less than " -"your kernel's SHMMIN parameter, in which case raising the request size or " -"reconfiguring SHMMIN is called for.\n" -"The PostgreSQL documentation contains more information about shared memory " -"configuration." -msgstr "" - -# port/pg_shmem.c:112 port/sysv_shmem.c:112 -#: port/pg_shmem.c:119 port/sysv_shmem.c:119 -#, c-format -msgid "" -"This error usually means that PostgreSQL's request for a shared memory " -"segment exceeded available memory or swap space. To reduce the request size " -"(currently %u bytes), reduce PostgreSQL's shared_buffers parameter " -"(currently %d) and/or its max_connections parameter (currently %d).\n" -"The PostgreSQL documentation contains more information about shared memory " -"configuration." -msgstr "" - -# port/pg_shmem.c:121 port/sysv_shmem.c:121 -#: port/pg_shmem.c:128 port/sysv_shmem.c:128 -#, c-format -msgid "" -"This error does *not* mean that you have run out of disk space. It occurs " -"either if all available shared memory IDs have been taken, in which case you " -"need to raise the SHMMNI parameter in your kernel, or because the system's " -"overall limit for shared memory has been reached. If you cannot increase " -"the shared memory limit, reduce PostgreSQL's shared memory request " -"(currently %u bytes), by reducing its shared_buffers parameter (currently %" -"d) and/or its max_connections parameter (currently %d).\n" -"The PostgreSQL documentation contains more information about shared memory " -"configuration." -msgstr "" - -# access/transam/slru.c:967 commands/tablespace.c:577 -# commands/tablespace.c:721 -#: port/pg_shmem.c:408 port/sysv_shmem.c:408 -#, c-format -msgid "could not stat data directory \"%s\": %m" -msgstr "無法讀取目錄\"%s\"：%m" - -# port/win32/security.c:39 -#: port/win32/security.c:43 -#, c-format -msgid "could not open process token: error code %d\n" -msgstr "無法開啟行程token：錯誤碼%d\n" - -# port/win32/security.c:89 -#: port/win32/security.c:63 -#, c-format -msgid "could not get SID for Administrators group: error code %d\n" -msgstr "無法取得群組Administrators的SID：錯誤碼%d\n" - -# port/win32/security.c:89 -#: port/win32/security.c:72 -#, c-format -msgid "could not get SID for PowerUsers group: error code %d\n" -msgstr "無法取得群組PowerUsers的SID：錯誤碼%d\n" - -# port/win32/signal.c:239 -#: port/win32/signal.c:173 -#, c-format -msgid "could not create signal listener pipe for pid %d: error code %d" -msgstr "無法為pid %d建立信號傾聽pipe，錯誤碼%d" - -# port/win32/signal.c:239 -#: port/win32/signal.c:253 -#, c-format -msgid "could not create signal listener pipe: error code %d; retrying\n" -msgstr "無法建立信號傾聽pipe：錯誤碼%d，重試中\n" - -# port/win32/signal.c:239 -#: port/win32/signal.c:266 -#, c-format -msgid "could not create signal dispatch thread: error code %d\n" -msgstr "無法建立信號派送執行緒：錯誤碼%d\n" - -# port/pg_sema.c:117 port/sysv_sema.c:117 -#: port/pg_sema.c:117 port/sysv_sema.c:117 -#, c-format -msgid "could not create semaphores: %m" -msgstr "無法建立semaphores：%m" - -# port/pg_sema.c:118 port/sysv_sema.c:118 -#: port/pg_sema.c:118 port/sysv_sema.c:118 -#, c-format -msgid "Failed system call was semget(%lu, %d, 0%o)." -msgstr "" - -# port/pg_sema.c:122 port/sysv_sema.c:122 -#: port/pg_sema.c:122 port/sysv_sema.c:122 -#, c-format -msgid "" -"This error does *not* mean that you have run out of disk space.\n" -"It occurs when either the system limit for the maximum number of semaphore " -"sets (SEMMNI), or the system wide maximum number of semaphores (SEMMNS), " -"would be exceeded. You need to raise the respective kernel parameter. " -"Alternatively, reduce PostgreSQL's consumption of semaphores by reducing its " -"max_connections parameter (currently %d).\n" -"The PostgreSQL documentation contains more information about configuring " -"your system for PostgreSQL." -msgstr "" - -# port/pg_sema.c:151 port/sysv_sema.c:151 -#: port/pg_sema.c:151 port/sysv_sema.c:151 -#, c-format -msgid "" -"You possibly need to raise your kernel's SEMVMX value to be at least %d. " -"Look into the PostgreSQL documentation for details." -msgstr "" - -# postmaster/postmaster.c:387 -#: postmaster/postmaster.c:450 -#, c-format -msgid "%s: assert checking is not compiled in\n" -msgstr "%s：編譯時未加入assert檢查\n" - -# postmaster/postmaster.c:512 postmaster/postmaster.c:525 -#: postmaster/postmaster.c:566 postmaster/postmaster.c:579 -#, c-format -msgid "Try \"%s --help\" for more information.\n" -msgstr "執行\"%s --help\"顯示更多資訊。\n" - -# postmaster/postmaster.c:523 -#: postmaster/postmaster.c:577 -#, c-format -msgid "%s: invalid argument: \"%s\"\n" -msgstr "%s：不合法的引數：\"%s\"\n" - -# postmaster/postmaster.c:550 -#: postmaster/postmaster.c:604 -#, c-format -msgid "" -"%s: the number of buffers (-B) must be at least twice the number of allowed " -"connections (-N) and at least 16\n" -msgstr "%s：暫存區數量(-B)至少要是連線數(-N)的2倍或至少為16。\n" - -# postmaster/postmaster.c:556 -#: postmaster/postmaster.c:610 -#, c-format -msgid "%s: superuser_reserved_connections must be less than max_connections\n" -msgstr "%s：superuser_reserved_connections必須小於max_connections\n" - -# postmaster/postmaster.c:565 -#: postmaster/postmaster.c:619 -#, c-format -msgid "%s: invalid datetoken tables, please fix\n" -msgstr "" - -# postmaster/postmaster.c:599 -#: postmaster/postmaster.c:653 -#, c-format -msgid "%s: could not locate matching postgres executable" -msgstr "%s：找不到符合的postgres執行檔" - -# postmaster/postmaster.c:666 -#: postmaster/postmaster.c:720 -msgid "invalid list syntax for \"listen_addresses\"" -msgstr "\"listen_addresses\"的list語法錯誤" - -# postmaster/postmaster.c:685 -#: postmaster/postmaster.c:739 -#, c-format -msgid "could not create listen socket for \"%s\"" -msgstr "無法為\"%s\"建立接受連線的socket" - -# postmaster/postmaster.c:714 -#: postmaster/postmaster.c:768 -msgid "could not create Unix-domain socket" -msgstr "無法建立Unix-domain socket" - -# postmaster/postmaster.c:722 -#: postmaster/postmaster.c:776 -msgid "no socket created for listening" -msgstr "接受連線用的socket未被建立" - -# postmaster/postmaster.c:799 -#: postmaster/postmaster.c:853 -#, c-format -msgid "%s: could not write external PID file \"%s\": %s\n" -msgstr "" - -# postmaster/postmaster.c:892 -#: postmaster/postmaster.c:946 -#, c-format -msgid "data directory \"%s\" does not exist" -msgstr "資料目錄\"%s\"不存在" - -# postmaster/postmaster.c:897 -#: postmaster/postmaster.c:951 -#, c-format -msgid "could not read permissions of directory \"%s\": %m" -msgstr "無法讀取目錄\"%s\"的權限：%m" - -# postmaster/postmaster.c:912 -#: postmaster/postmaster.c:966 -#, c-format -msgid "data directory \"%s\" has group or world access" -msgstr "資料目錄\"%s\"可以被群組或其他使用者存取" - -# postmaster/postmaster.c:914 -#: postmaster/postmaster.c:968 -msgid "Permissions should be u=rwx (0700)." -msgstr "權限必須是 u=rwx (0700)。" - -# postmaster/postmaster.c:925 -#: postmaster/postmaster.c:979 -#, c-format -msgid "" -"%s: could not find the database system\n" -"Expected to find it in the directory \"%s\",\n" -"but could not open file \"%s\": %s\n" -msgstr "" -"%s 找不到資料庫系統。\n" -"預期在目錄\"%s\"中，\n" -"但是無法開啟檔案\"%s\"：%s\n" -"\n" - -# postmaster/postmaster.c:970 -#: postmaster/postmaster.c:1024 -#, c-format -msgid "%s: could not fork background process: %s\n" -msgstr "%s：無法建立背景行程：%s\n" - -# postmaster/postmaster.c:992 -#: postmaster/postmaster.c:1046 -#, c-format -msgid "%s: could not dissociate from controlling TTY: %s\n" -msgstr "%s：無法從控制TTY分離：%s\n" - -# postmaster/postmaster.c:1015 -#: postmaster/postmaster.c:1069 -#, c-format -msgid "" -"%s is the PostgreSQL server.\n" -"\n" -msgstr "" -"%s 是PostgreSQL伺服器。\n" -"\n" - -# postmaster/postmaster.c:1016 -#: postmaster/postmaster.c:1070 -#, c-format -msgid "" -"Usage:\n" -" %s [OPTION]...\n" -"\n" -msgstr "" -"使用方法：\n" -" %s [選項]...\n" -"\n" - -# postmaster/postmaster.c:1017 tcop/postgres.c:2115 -#: postmaster/postmaster.c:1071 tcop/postgres.c:2125 -msgid "Options:\n" -msgstr "選項：\n" - -# postmaster/postmaster.c:1019 tcop/postgres.c:2117 -#: postmaster/postmaster.c:1073 tcop/postgres.c:2127 -msgid " -A 1|0 enable/disable run-time assert checking\n" -msgstr " -A 1|0 打開/關閉執行時期assert檢查\n" - -# postmaster/postmaster.c:1021 tcop/postgres.c:2119 -#: postmaster/postmaster.c:1075 tcop/postgres.c:2129 -msgid " -B NBUFFERS number of shared buffers\n" -msgstr " -B NBUFFERS 共享暫存區的數量\n" - -# postmaster/postmaster.c:1022 tcop/postgres.c:2120 -#: postmaster/postmaster.c:1076 tcop/postgres.c:2130 -msgid " -c NAME=VALUE set run-time parameter\n" -msgstr " -c NAME=VALUE 設讚執行時期參數\n" - -# postmaster/postmaster.c:1023 -#: postmaster/postmaster.c:1077 -msgid " -d 1-5 debugging level\n" -msgstr " -d 1-5 除錯等級\n" - -# postmaster/postmaster.c:1024 tcop/postgres.c:2122 -#: postmaster/postmaster.c:1078 tcop/postgres.c:2132 -msgid " -D DATADIR database directory\n" -msgstr " -D DATADIR 資料庫目錄\n" - -# postmaster/postmaster.c:1025 tcop/postgres.c:2125 -#: postmaster/postmaster.c:1079 tcop/postgres.c:2135 -msgid " -F turn fsync off\n" -msgstr " -F 關閉fsync\n" - -# postmaster/postmaster.c:1026 -#: postmaster/postmaster.c:1080 -msgid " -h HOSTNAME host name or IP address to listen on\n" -msgstr " -h HOSTNAME 要傾聽的主機名稱或IP位址\n" - -# postmaster/postmaster.c:1027 -#: postmaster/postmaster.c:1081 -msgid " -i enable TCP/IP connections\n" -msgstr " -i 啟用TCP/IP連線\n" - -# postmaster/postmaster.c:1028 -#: postmaster/postmaster.c:1082 -msgid " -k DIRECTORY Unix-domain socket location\n" -msgstr " -k DIRECTORY Unix-domain socket的位置\n" - -# postmaster/postmaster.c:1030 -#: postmaster/postmaster.c:1084 -msgid " -l enable SSL connections\n" -msgstr " -l 啟用SSL連線\n" - -# postmaster/postmaster.c:1032 -#: postmaster/postmaster.c:1086 -msgid " -N MAX-CONNECT maximum number of allowed connections\n" -msgstr " -N MAX-CONNECT 允許的最大連接數\n" - -# postmaster/postmaster.c:1033 -#: postmaster/postmaster.c:1087 -msgid " -o OPTIONS pass \"OPTIONS\" to each server process\n" -msgstr " -o OPTIONS 將\"OPTIONS\"傳給每一個伺服器行程\n" - -# postmaster/postmaster.c:1034 -#: postmaster/postmaster.c:1088 -msgid " -p PORT port number to listen on\n" -msgstr " -p 埠號 要傾聽的埠號\n" - -# postmaster/postmaster.c:1035 -#: postmaster/postmaster.c:1089 -msgid "" -" -S silent mode (start in background without logging output)\n" -msgstr " -S 安靜模式(在背景啟動且不顯示訊息)\n" - -# postmaster/postmaster.c:1036 tcop/postgres.c:2132 -#: postmaster/postmaster.c:1090 tcop/postgres.c:2142 -msgid " --help show this help, then exit\n" -msgstr " --help 顯示這份說明然後結束\n" - -# postmaster/postmaster.c:1037 tcop/postgres.c:2133 -#: postmaster/postmaster.c:1091 tcop/postgres.c:2143 -msgid " --version output version information, then exit\n" -msgstr " --version 顯示版本資訊然後結束\n" - -# postmaster/postmaster.c:1039 tcop/postgres.c:2134 -#: postmaster/postmaster.c:1093 tcop/postgres.c:2144 -msgid "" -"\n" -"Developer options:\n" -msgstr "" -"\n" -"開發人員選項：\n" - -# postmaster/postmaster.c:1040 -#: postmaster/postmaster.c:1094 -msgid "" -" -n do not reinitialize shared memory after abnormal exit\n" -msgstr " -n 異常結束之後不重新初始化共享記憶體\n" - -# postmaster/postmaster.c:1041 -#: postmaster/postmaster.c:1095 -msgid " -s send SIGSTOP to all backend servers if one dies\n" -msgstr " -s 只要有一個後結束就向所有後端發送SIGSTOP\n" - -# postmaster/postmaster.c:1043 -#: postmaster/postmaster.c:1097 -msgid "" -"\n" -"Please read the documentation for the complete list of run-time\n" -"configuration settings and how to set them on the command line or in\n" -"the configuration file.\n" -"\n" -"Report bugs to .\n" -msgstr "" -"\n" -"請參考說明文件取得執行時期參數設定的完整列表以及如\n" -"何在命令列或者在設定檔裡設定它們的詳細資訊。\n" -"\n" -"回報錯誤給。\n" - -# postmaster/postmaster.c:1105 -#: postmaster/postmaster.c:1159 -#, c-format -msgid "select() failed in postmaster: %m" -msgstr "postmaster中select()失敗：%m" - -# postmaster/postmaster.c:1256 postmaster/postmaster.c:1287 -#: postmaster/postmaster.c:1310 postmaster/postmaster.c:1341 -msgid "incomplete startup packet" -msgstr "起始封包不完整" - -# postmaster/postmaster.c:1268 -#: postmaster/postmaster.c:1322 -msgid "invalid length of startup packet" -msgstr "起始封包的長度不正確" - -# postmaster/postmaster.c:1320 -#: postmaster/postmaster.c:1374 -#, c-format -msgid "failed to send SSL negotiation response: %m" -msgstr "傳送SSL交談回應失敗：%m" - -# postmaster/postmaster.c:1349 -#: postmaster/postmaster.c:1403 -#, c-format -msgid "unsupported frontend protocol %u.%u: server supports %u.0 to %u.%u" -msgstr "" - -# postmaster/postmaster.c:1413 -#: postmaster/postmaster.c:1467 -msgid "invalid startup packet layout: expected terminator as last byte" -msgstr "" - -# postmaster/postmaster.c:1442 -#: postmaster/postmaster.c:1496 -msgid "no PostgreSQL user name specified in startup packet" -msgstr "起始封包中未指定PostgreSQL使用者" - -# postmaster/postmaster.c:1495 -#: postmaster/postmaster.c:1549 -msgid "the database system is starting up" -msgstr "資料庫系統正在啟動" - -# postmaster/postmaster.c:1500 -#: postmaster/postmaster.c:1554 -msgid "the database system is shutting down" -msgstr "資料庫系統正在關閉" - -# postmaster/postmaster.c:1505 -#: postmaster/postmaster.c:1559 -msgid "the database system is in recovery mode" -msgstr "資料庫系統正在復原模式" - -# postmaster/postmaster.c:1510 storage/ipc/sinval.c:105 -# storage/lmgr/proc.c:246 -#: postmaster/postmaster.c:1564 storage/ipc/sinval.c:105 -#: storage/lmgr/proc.c:246 -msgid "sorry, too many clients already" -msgstr "對不起，用戶端過多" - -# postmaster/postmaster.c:1737 -#: postmaster/postmaster.c:1791 -msgid "received SIGHUP, reloading configuration files" -msgstr "收到SIGHUP，重新載入設定檔" - -# postmaster/postmaster.c:1789 -#: postmaster/postmaster.c:1843 -msgid "received smart shutdown request" -msgstr "收到智慧型關閉的要求" - -# postmaster/postmaster.c:1825 -#: postmaster/postmaster.c:1879 -msgid "received fast shutdown request" -msgstr "收到快速關閉的要求" - -# postmaster/postmaster.c:1832 -#: postmaster/postmaster.c:1886 -msgid "aborting any active transactions" -msgstr "中止任何進行中的交易" - -# postmaster/postmaster.c:1870 -#: postmaster/postmaster.c:1924 -msgid "received immediate shutdown request" -msgstr "收到立即關閉的要求" - -# postmaster/postmaster.c:1943 -#: postmaster/postmaster.c:1997 -msgid "startup process" -msgstr "啟動行程" - -# postmaster/postmaster.c:1946 -#: postmaster/postmaster.c:2000 -msgid "aborting startup due to startup process failure" -msgstr "啟動行程失敗，中止啟動" - -# postmaster/postmaster.c:2009 -#: postmaster/postmaster.c:2063 -msgid "background writer process" -msgstr "background writer行程" - -# postmaster/postmaster.c:2022 -#: postmaster/postmaster.c:2076 -msgid "archiver process" -msgstr "備份器行程" - -# postmaster/postmaster.c:2039 -#: postmaster/postmaster.c:2093 -msgid "statistics collector process" -msgstr "統計資料收集器行程" - -# postmaster/postmaster.c:2053 -#: postmaster/postmaster.c:2107 -msgid "system logger process" -msgstr "系統logger行程" - -# postmaster/postmaster.c:2074 -#: postmaster/postmaster.c:2128 -msgid "all server processes terminated; reinitializing" -msgstr "所有伺服器行程已中止，重新初始化" - -# postmaster/postmaster.c:2120 postmaster/postmaster.c:2130 -#: postmaster/postmaster.c:2174 postmaster/postmaster.c:2184 -msgid "server process" -msgstr "伺服器行程" - -# postmaster/postmaster.c:2175 -#: postmaster/postmaster.c:2229 -msgid "terminating any other active server processes" -msgstr "中止所有運行中的伺服器行程" - -# postmaster/postmaster.c:2272 -#: postmaster/postmaster.c:2326 -#, c-format -msgid "%s (PID %d) exited with exit code %d" -msgstr "" - -# postmaster/postmaster.c:2281 -#: postmaster/postmaster.c:2335 -#, c-format -msgid "%s (PID %d) was terminated by signal %d" -msgstr "" - -# postmaster/postmaster.c:2290 -#: postmaster/postmaster.c:2344 -#, c-format -msgid "%s (PID %d) exited with unexpected status %d" -msgstr "" - -# postmaster/postmaster.c:2415 -#: postmaster/postmaster.c:2469 -#, c-format -msgid "could not fork new process for connection: %m" -msgstr "無法為連線建立新行程：%m" - -# postmaster/postmaster.c:2454 -#: postmaster/postmaster.c:2508 -msgid "could not fork new process for connection: " -msgstr "無法為連線建立新行程：" - -# postmaster/postmaster.c:2594 -#: postmaster/postmaster.c:2647 -#, c-format -msgid "getnameinfo_all() failed: %s" -msgstr "getnameinfo_all()失敗：%s" - -# postmaster/postmaster.c:2603 -#: postmaster/postmaster.c:2656 -#, c-format -msgid "connection received: host=%s port=%s" -msgstr "連線已接收：host=%s port=%s" - -# postmaster/postmaster.c:2675 -#: postmaster/postmaster.c:2728 -#, c-format -msgid "connection authorized: user=%s database=%s" -msgstr "連線已授權：user=%s database=%s" - -# postmaster/postmaster.c:2849 -#: postmaster/postmaster.c:2946 -#, c-format -msgid "could not execute server process \"%s\": %m" -msgstr "無法執行伺服器行程\"%s\"：%m" - -# postmaster/postmaster.c:3256 -#: postmaster/postmaster.c:3540 -#, c-format -msgid "could not fork startup process: %m" -msgstr "無法fork啟動行程：%m" - -# postmaster/postmaster.c:3260 -#: postmaster/postmaster.c:3544 -#, c-format -msgid "could not fork background writer process: %m" -msgstr "無法建立 background writer 行程：%m" - -# postmaster/postmaster.c:3264 -#: postmaster/postmaster.c:3548 -#, c-format -msgid "could not fork process: %m" -msgstr "無法建立行程: %m" - -# port/win32/security.c:39 -#: postmaster/postmaster.c:3722 -#, c-format -msgid "could not duplicate socket %d for use in backend: error code %d" -msgstr "無法複製socket %d供後端使用：錯誤碼%d" - -# port/win32/signal.c:239 -#: postmaster/postmaster.c:3751 -#, c-format -msgid "could not create inherited socket: error code %d\n" -msgstr "無法建立inherited socket：錯誤碼%d\n" - -# utils/init/miscinit.c:792 utils/misc/guc.c:5074 -#: postmaster/postmaster.c:3779 postmaster/postmaster.c:3786 -#, c-format -msgid "could not read from backend variables file \"%s\": %s\n" -msgstr "無法讀取後端變數檔\"%s\"：%s\n" - -# access/transam/xlog.c:1944 access/transam/xlog.c:5453 -# access/transam/xlog.c:5607 postmaster/postmaster.c:3504 -#: postmaster/postmaster.c:3795 -#, c-format -msgid "could not remove file \"%s\": %s\n" -msgstr "無法刪除檔案\"%s\"：%s\n" - -# postmaster/postmaster.c:3762 -#: postmaster/postmaster.c:3810 -#, c-format -msgid "could not map view of backend variables: error code %d\n" -msgstr "" - -# postmaster/postmaster.c:3762 -#: postmaster/postmaster.c:3819 -#, c-format -msgid "could not unmap view of backend variables: error code %d\n" -msgstr "" - -# port/win32/security.c:52 port/win32/security.c:69 -#: postmaster/postmaster.c:3826 -#, c-format -msgid "could not close handle to backend parameter variables: error code %d\n" -msgstr "" - -# postmaster/postmaster.c:3762 -#: postmaster/postmaster.c:4065 -#, c-format -msgid "could not wait on child process handle: error code %d\n" -msgstr "無法等待子行程handle：錯誤碼%d\n" - -# postmaster/bgwriter.c:336 -#: postmaster/bgwriter.c:336 -#, c-format -msgid "checkpoints are occurring too frequently (%d seconds apart)" -msgstr "" - -# postmaster/bgwriter.c:338 -#: postmaster/bgwriter.c:338 -msgid "" -"Consider increasing the configuration parameter \"checkpoint_segments\"." -msgstr "" - -# postmaster/bgwriter.c:490 -#: postmaster/bgwriter.c:490 -msgid "not enough shared memory for background writer" -msgstr "" - -# postmaster/bgwriter.c:555 -#: postmaster/bgwriter.c:555 -msgid "checkpoint request failed" -msgstr "檢查點請求失敗" - -# libpq/auth.c:421 -#: postmaster/bgwriter.c:556 -msgid "Consult the server log for details." -msgstr "查看伺服器記錄檔以獲得詳細資料。" - -# postmaster/pgarch.c:164 -#: postmaster/pgarch.c:164 -#, c-format -msgid "could not fork archiver: %m" -msgstr "" - -#: postmaster/pgarch.c:391 -#, c-format -msgid "transaction log file \"%s\" could not be archived: too many failures" -msgstr "" - -# postmaster/pgarch.c:475 -#: postmaster/pgarch.c:474 -#, c-format -msgid "archive command \"%s\" failed: return code %d" -msgstr "" - -# postmaster/pgarch.c:480 -#: postmaster/pgarch.c:479 -#, c-format -msgid "archived transaction log file \"%s\"" -msgstr "" - -# postmaster/pgarch.c:526 -#: postmaster/pgarch.c:525 -#, c-format -msgid "could not open archive status directory \"%s\": %m" -msgstr "" - -# postmaster/pgarch.c:565 -#: postmaster/pgarch.c:564 -#, c-format -msgid "could not read archive status directory \"%s\": %m" -msgstr "" - -# postmaster/pgstat.c:257 -#: postmaster/pgstat.c:259 -#, c-format -msgid "could not resolve \"localhost\": %s" -msgstr "無法解析\"localhost\"：%s" - -# postmaster/pgstat.c:285 -#: postmaster/pgstat.c:287 -#, c-format -msgid "could not create socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:297 -#: postmaster/pgstat.c:299 -#, c-format -msgid "could not bind socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:308 -#: postmaster/pgstat.c:310 -#, c-format -msgid "could not get address of socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:324 -#: postmaster/pgstat.c:326 -#, c-format -msgid "could not connect socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:341 -#: postmaster/pgstat.c:343 -#, c-format -msgid "could not send test message on socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:366 postmaster/pgstat.c:1610 -#: postmaster/pgstat.c:368 postmaster/pgstat.c:1567 -#, c-format -msgid "select() failed in statistics collector: %m" -msgstr "在統計資料收集器中 select() 失敗: %m" - -# postmaster/pgstat.c:381 -#: postmaster/pgstat.c:383 -msgid "test message did not get through on socket for statistics collector" -msgstr "" - -# postmaster/pgstat.c:393 -#: postmaster/pgstat.c:395 -#, c-format -msgid "could not receive test message on socket for statistics collector: %m" -msgstr "" - -# postmaster/pgstat.c:403 -#: postmaster/pgstat.c:405 -msgid "incorrect test message transmission on socket for statistics collector" -msgstr "" - -# postmaster/pgstat.c:418 -#: postmaster/pgstat.c:420 -msgid "disabling statistics collector for lack of working socket" -msgstr "沒有可用的socket，停用統計資料收集器" - -# postmaster/pgstat.c:432 -#: postmaster/pgstat.c:434 -#, c-format -msgid "could not set statistics collector socket to nonblocking mode: %m" -msgstr "無法將統計資料收集器 socket 設為非阻擋模式：%m" - -# postmaster/pgstat.c:571 -#: postmaster/pgstat.c:567 -msgid "statistics collector startup skipped" -msgstr "跳過統計資料收集器啟動程序" - -# postmaster/pgstat.c:605 -#: postmaster/pgstat.c:601 -#, c-format -msgid "could not fork statistics buffer: %m" -msgstr "無法 fork 統計資料緩衝區：%m" - -# postmaster/pgstat.c:963 -#: postmaster/pgstat.c:959 -msgid "must be superuser to reset statistics counters" -msgstr "只有管理者能重設統計資料計數器" - -# postmaster/pgstat.c:1411 -#: postmaster/pgstat.c:1381 -#, c-format -msgid "could not create pipe for statistics buffer: %m" -msgstr "無法為統計資料緩衝區建立管道：%m" - -# postmaster/pgstat.c:1424 -#: postmaster/pgstat.c:1393 -#, c-format -msgid "could not fork statistics collector: %m" -msgstr "無法fork統計資料收集器：%m" - -# postmaster/pgstat.c:1652 -#: postmaster/pgstat.c:1608 -#, c-format -msgid "could not read from statistics collector pipe: %m" -msgstr "無法由統計資料收集器管道讀取資料: %m" - -# postmaster/pgstat.c:1674 -#: postmaster/pgstat.c:1629 -msgid "invalid statistics message length" -msgstr "無效的統計資料訊息長度" - -# postmaster/pgstat.c:1821 -#: postmaster/pgstat.c:1774 -#, c-format -msgid "could not set statistics collector pipe to nonblocking mode: %m" -msgstr "無法將統計資料收集器管道設為非阻擋模式: %m" - -# postmaster/pgstat.c:1861 -#: postmaster/pgstat.c:1805 -msgid "statistics buffer is full" -msgstr "統計資料緩衝區已滿" - -# postmaster/pgstat.c:1892 -#: postmaster/pgstat.c:1836 -#, c-format -msgid "select() failed in statistics buffer: %m" -msgstr "在統計資料緩衝區中 select() 失敗: %m" - -# postmaster/pgstat.c:1908 -#: postmaster/pgstat.c:1850 -#, c-format -msgid "could not read statistics message: %m" -msgstr "無法讀取統計資料訊息: %m" - -# postmaster/pgstat.c:1973 -#: postmaster/pgstat.c:1913 -#, c-format -msgid "could not write to statistics collector pipe: %m" -msgstr "無法寫至統計資料收集器的管道：%m" - -# postmaster/pgstat.c:2039 -#: postmaster/pgstat.c:1988 -#, c-format -msgid "invalid server process ID %d" -msgstr "不合法的伺服器行程ID %d" - -# postmaster/pgstat.c:1537 postmaster/pgstat.c:1550 postmaster/pgstat.c:1833 -# postmaster/pgstat.c:2099 postmaster/pgstat.c:2131 postmaster/pgstat.c:2185 -# postmaster/pgstat.c:2446 postmaster/pgstat.c:2519 postmaster/pgstat.c:2565 -# postmaster/pgstat.c:2616 postmaster/pgstat.c:2866 postmaster/pgstat.c:3048 -#: postmaster/pgstat.c:2047 postmaster/pgstat.c:2122 postmaster/pgstat.c:2720 -msgid "out of memory in statistics collector --- abort" -msgstr "統計資料收集器記憶體用盡 --- 中止" - -# postmaster/pgstat.c:2234 -#: postmaster/pgstat.c:2170 -#, c-format -msgid "could not open temporary statistics file \"%s\": %m" -msgstr "無法開啟統計資料暫存檔 \"%s\": %m" - -# postmaster/pgstat.c:2261 -#: postmaster/pgstat.c:2196 -msgid "database hash table corrupted during cleanup --- abort" -msgstr "" - -# postmaster/pgstat.c:2298 -#: postmaster/pgstat.c:2231 -#, c-format -msgid "tables hash table for database %u corrupted during cleanup --- abort" -msgstr "" - -# postmaster/pgstat.c:2347 -#: postmaster/pgstat.c:2279 -#, c-format -msgid "could not close temporary statistics file \"%s\": %m" -msgstr "無法關閉統計資料暫存檔 \"%s\": %m" - -# postmaster/pgstat.c:2356 -#: postmaster/pgstat.c:2288 -#, c-format -msgid "could not rename temporary statistics file \"%s\" to \"%s\": %m" -msgstr "無法將統計資料暫存檔由 \"%s\" 更名為 \"%s\": %m" - -# postmaster/pgstat.c:2378 -#: postmaster/pgstat.c:2310 -msgid "dead-server-process hash table corrupted during cleanup --- abort" -msgstr "" - -# postmaster/pgstat.c:2501 postmaster/pgstat.c:2533 postmaster/pgstat.c:2596 -# postmaster/pgstat.c:2629 postmaster/pgstat.c:2650 postmaster/pgstat.c:2696 -# postmaster/pgstat.c:2729 -#: postmaster/pgstat.c:2417 postmaster/pgstat.c:2437 postmaster/pgstat.c:2483 -#: postmaster/pgstat.c:2504 postmaster/pgstat.c:2521 postmaster/pgstat.c:2555 -#: postmaster/pgstat.c:2584 -msgid "corrupted pgstat.stat file" -msgstr "" - -# postmaster/syslogger.c:317 -#: postmaster/syslogger.c:317 -#, c-format -msgid "select() failed in logger process: %m" -msgstr "select() 在logger行程中失敗：%m" - -# postmaster/syslogger.c:329 postmaster/syslogger.c:734 -#: postmaster/syslogger.c:329 postmaster/syslogger.c:734 -#, c-format -msgid "could not read from logger pipe: %m" -msgstr "無法讀取logger pipe：%m" - -# postmaster/syslogger.c:361 -#: postmaster/syslogger.c:361 -msgid "logger shutting down" -msgstr "正在關閉logger" - -# postmaster/syslogger.c:405 -#: postmaster/syslogger.c:405 postmaster/syslogger.c:419 -#, c-format -msgid "could not create pipe for syslog: %m" -msgstr "無法為syslog建立管道：%m" - -# postmaster/syslogger.c:447 -#: postmaster/syslogger.c:447 -#, c-format -msgid "could not create log file \"%s\": %m" -msgstr "無法建立log檔\"%s\"：%m" - -# postmaster/syslogger.c:477 -#: postmaster/syslogger.c:477 -#, c-format -msgid "could not fork system logger: %m" -msgstr "無法 fork 系統logger：%m" - -# postmaster/syslogger.c:509 -#: postmaster/syslogger.c:509 -#, c-format -msgid "could not redirect stdout: %m" -msgstr "無法重導向stdout：%m" - -# postmaster/syslogger.c:514 postmaster/syslogger.c:527 -#: postmaster/syslogger.c:514 postmaster/syslogger.c:527 -#, c-format -msgid "could not redirect stderr: %m" -msgstr "無法重導向stderr：%m" - -# postmaster/syslogger.c:703 -#: postmaster/syslogger.c:703 -#, c-format -msgid "could not write to log file: %m" -msgstr "無法寫入log檔：%m" - -# postmaster/syslogger.c:790 -#: postmaster/syslogger.c:790 -#, c-format -msgid "could not open new log file \"%s\": %m" -msgstr "無法開啟新log檔\"%s\"：%m" - -# postmaster/syslogger.c:802 -#: postmaster/syslogger.c:802 -msgid "disabling automatic rotation (use SIGHUP to reenable)" -msgstr "" - -# rewrite/rewriteDefine.c:104 rewrite/rewriteDefine.c:589 -#: rewrite/rewriteDefine.c:104 rewrite/rewriteDefine.c:589 -#, c-format -msgid "rule \"%s\" for relation \"%s\" already exists" -msgstr "" - -# rewrite/rewriteDefine.c:234 -#: rewrite/rewriteDefine.c:234 -msgid "rule actions on OLD are not implemented" -msgstr "" - -# rewrite/rewriteDefine.c:235 -#: rewrite/rewriteDefine.c:235 -msgid "Use views or triggers instead." -msgstr "改用 views 或 triggers。" - -# rewrite/rewriteDefine.c:239 -#: rewrite/rewriteDefine.c:239 -msgid "rule actions on NEW are not implemented" -msgstr "" - -# rewrite/rewriteDefine.c:240 -#: rewrite/rewriteDefine.c:240 -msgid "Use triggers instead." -msgstr "改用 triggers。" - -# rewrite/rewriteDefine.c:257 -#: rewrite/rewriteDefine.c:257 -msgid "INSTEAD NOTHING rules on SELECT are not implemented" -msgstr "" - -# rewrite/rewriteDefine.c:258 -#: rewrite/rewriteDefine.c:258 -msgid "Use views instead." -msgstr "改用 views。" - -# rewrite/rewriteDefine.c:266 -#: rewrite/rewriteDefine.c:266 -msgid "multiple actions for rules on SELECT are not implemented" -msgstr "" - -# rewrite/rewriteDefine.c:275 -#: rewrite/rewriteDefine.c:275 -msgid "rules on SELECT must have action INSTEAD SELECT" -msgstr "" - -# rewrite/rewriteDefine.c:283 -#: rewrite/rewriteDefine.c:283 -msgid "event qualifications are not implemented for rules on SELECT" -msgstr "" - -# rewrite/rewriteDefine.c:303 -#: rewrite/rewriteDefine.c:303 -msgid "SELECT rule's target list has too many entries" -msgstr "" - -# rewrite/rewriteDefine.c:319 -#: rewrite/rewriteDefine.c:319 -msgid "cannot convert relation containing dropped columns to view" -msgstr "" - -# rewrite/rewriteDefine.c:324 -#: rewrite/rewriteDefine.c:324 -#, c-format -msgid "SELECT rule's target entry %d has different column name from \"%s\"" -msgstr "" - -# rewrite/rewriteDefine.c:329 -#: rewrite/rewriteDefine.c:329 -#, c-format -msgid "SELECT rule's target entry %d has different type from column \"%s\"" -msgstr "" - -# rewrite/rewriteDefine.c:342 -#: rewrite/rewriteDefine.c:342 -#, c-format -msgid "SELECT rule's target entry %d has different size from column \"%s\"" -msgstr "" - -# rewrite/rewriteDefine.c:348 -#: rewrite/rewriteDefine.c:348 -msgid "SELECT rule's target list has too few entries" -msgstr "" - -# rewrite/rewriteDefine.c:363 -#: rewrite/rewriteDefine.c:363 -#, c-format -msgid "\"%s\" is already a view" -msgstr "\"%s\"已經是view" - -# rewrite/rewriteDefine.c:387 -#: rewrite/rewriteDefine.c:387 -#, c-format -msgid "view rule for \"%s\" must be named \"%s\"" -msgstr "" - -# rewrite/rewriteDefine.c:407 -#: rewrite/rewriteDefine.c:407 -#, c-format -msgid "could not convert table \"%s\" to a view because it is not empty" -msgstr "" - -# rewrite/rewriteDefine.c:414 -#: rewrite/rewriteDefine.c:414 -#, c-format -msgid "could not convert table \"%s\" to a view because it has triggers" -msgstr "" - -# rewrite/rewriteDefine.c:416 -#: rewrite/rewriteDefine.c:416 -msgid "" -"In particular, the table may not be involved in any foreign key " -"relationships." -msgstr "" - -# rewrite/rewriteDefine.c:421 -#: rewrite/rewriteDefine.c:421 -#, c-format -msgid "could not convert table \"%s\" to a view because it has indexes" -msgstr "" - -# rewrite/rewriteDefine.c:427 -#: rewrite/rewriteDefine.c:427 -#, c-format -msgid "could not convert table \"%s\" to a view because it has child tables" -msgstr "" - -# rewrite/rewriteHandler.c:491 rewrite/rewriteHandler.c:510 -#: rewrite/rewriteHandler.c:492 rewrite/rewriteHandler.c:511 -#, c-format -msgid "multiple assignments to same column \"%s\"" -msgstr "" - -# rewrite/rewriteHandler.c:967 rewrite/rewriteHandler.c:1252 -#: rewrite/rewriteHandler.c:968 rewrite/rewriteHandler.c:1253 -#, c-format -msgid "infinite recursion detected in rules for relation \"%s\"" -msgstr "" - -# rewrite/rewriteHandler.c:1362 -#: rewrite/rewriteHandler.c:1365 -msgid "cannot insert into a view" -msgstr "無法插入view" - -# rewrite/rewriteHandler.c:1363 -#: rewrite/rewriteHandler.c:1366 -msgid "You need an unconditional ON INSERT DO INSTEAD rule." -msgstr "" - -# rewrite/rewriteHandler.c:1368 -#: rewrite/rewriteHandler.c:1371 -msgid "cannot update a view" -msgstr "無法更新view" - -# rewrite/rewriteHandler.c:1369 -#: rewrite/rewriteHandler.c:1372 -msgid "You need an unconditional ON UPDATE DO INSTEAD rule." -msgstr "" - -# rewrite/rewriteHandler.c:1374 -#: rewrite/rewriteHandler.c:1377 -msgid "cannot delete from a view" -msgstr "無法經由view刪除" - -# rewrite/rewriteHandler.c:1375 -#: rewrite/rewriteHandler.c:1378 -msgid "You need an unconditional ON DELETE DO INSTEAD rule." -msgstr "" - -# rewrite/rewriteManip.c:737 rewrite/rewriteManip.c:793 -#: rewrite/rewriteManip.c:737 rewrite/rewriteManip.c:793 -msgid "conditional utility statements are not implemented" -msgstr "" - -# storage/buffer/bufmgr.c:210 -#: storage/buffer/bufmgr.c:217 -#, c-format -msgid "invalid page header in block %u of relation \"%s\"; zeroing out page" -msgstr "" - -# storage/buffer/bufmgr.c:217 -#: storage/buffer/bufmgr.c:224 -#, c-format -msgid "invalid page header in block %u of relation \"%s\"" -msgstr "" - -# storage/buffer/bufmgr.c:1958 -#: storage/buffer/bufmgr.c:1991 -#, c-format -msgid "could not write block %u of %u/%u/%u" -msgstr "" - -# storage/buffer/bufmgr.c:1963 -#: storage/buffer/bufmgr.c:1996 -msgid "Multiple failures --- write error may be permanent." -msgstr "" - -# storage/buffer/bufmgr.c:1981 -#: storage/buffer/bufmgr.c:2014 -#, c-format -msgid "writing block %u of relation %u/%u/%u" -msgstr "" - -# storage/buffer/buf_table.c:93 storage/freespace/freespace.c:1014 -# storage/ipc/shmem.c:185 storage/ipc/shmem.c:246 storage/ipc/shmem.c:386 -# storage/lmgr/lock.c:561 storage/lmgr/lock.c:624 storage/lmgr/proc.c:179 -#: storage/buffer/buf_table.c:93 storage/freespace/freespace.c:1014 -#: storage/ipc/shmem.c:185 storage/ipc/shmem.c:246 storage/ipc/shmem.c:386 -#: storage/lmgr/lock.c:558 storage/lmgr/lock.c:621 storage/lmgr/proc.c:179 -msgid "out of shared memory" -msgstr "共享記憶體用盡" - -# storage/buffer/localbuf.c:103 -#: storage/buffer/localbuf.c:103 -msgid "no empty local buffer available" -msgstr "" - -# storage/file/fd.c:355 -#: storage/file/fd.c:355 -msgid "insufficient file descriptors available to start server process" -msgstr "" - -# storage/file/fd.c:356 -#: storage/file/fd.c:356 -#, c-format -msgid "System allows %d, we need at least %d." -msgstr "" - -# storage/file/fd.c:397 storage/file/fd.c:1180 storage/file/fd.c:1295 -#: storage/file/fd.c:397 storage/file/fd.c:1180 storage/file/fd.c:1295 -#, c-format -msgid "out of file descriptors: %m; release and retry" -msgstr "" - -# storage/freespace/freespace.c:276 storage/freespace/freespace.c:294 -# storage/freespace/freespace.c:313 -#: storage/freespace/freespace.c:276 storage/freespace/freespace.c:294 -#: storage/freespace/freespace.c:313 -msgid "insufficient shared memory for free space map" -msgstr "" - -# storage/freespace/freespace.c:306 -#: storage/freespace/freespace.c:306 -#, c-format -msgid "max_fsm_pages must exceed max_fsm_relations * %d" -msgstr "" - -# storage/freespace/freespace.c:341 -#: storage/freespace/freespace.c:341 -msgid "max_fsm_pages is too large" -msgstr "max_fsm_pages太大" - -# storage/freespace/freespace.c:709 -#: storage/freespace/freespace.c:709 -#, c-format -msgid "free space map: %d relations, %d pages stored; %.0f total pages needed" -msgstr "" - -# storage/freespace/freespace.c:711 -#: storage/freespace/freespace.c:711 -#, c-format -msgid "Allocated FSM size: %d relations + %d pages = %.0f kB shared memory." -msgstr "" - -# storage/ipc/shmem.c:420 -#: storage/ipc/shmem.c:420 -#, c-format -msgid "could not allocate shared memory segment \"%s\"" -msgstr "" - -# storage/lmgr/lock.c:562 storage/lmgr/lock.c:625 -#: storage/lmgr/lock.c:559 storage/lmgr/lock.c:622 -msgid "You may need to increase max_locks_per_transaction." -msgstr "您可能必須增加 max_locks_per_transaction。" - -# storage/lmgr/deadlock.c:867 -#: storage/lmgr/deadlock.c:867 -#, c-format -msgid "Process %d waits for %s on transaction %u; blocked by process %d." -msgstr "" - -# storage/lmgr/deadlock.c:877 -#: storage/lmgr/deadlock.c:877 -#, c-format -msgid "" -"Process %d waits for %s on relation %u of database %u; blocked by process %d." -msgstr "" - -# storage/lmgr/deadlock.c:887 -#: storage/lmgr/deadlock.c:887 -msgid "deadlock detected" -msgstr "發現deadlock" - -# storage/page/bufpage.c:135 storage/page/bufpage.c:334 -# storage/page/bufpage.c:472 -#: storage/page/bufpage.c:135 storage/page/bufpage.c:334 -#: storage/page/bufpage.c:472 -#, c-format -msgid "corrupted page pointers: lower = %u, upper = %u, special = %u" -msgstr "" - -# storage/page/bufpage.c:377 -#: storage/page/bufpage.c:377 -#, c-format -msgid "corrupted item pointer: %u" -msgstr "" - -# storage/page/bufpage.c:392 -#: storage/page/bufpage.c:392 -#, c-format -msgid "corrupted item lengths: total %u, available space %u" -msgstr "" - -# storage/page/bufpage.c:490 -#: storage/page/bufpage.c:490 -#, c-format -msgid "corrupted item pointer: offset = %u, size = %u" -msgstr "" - -# storage/smgr/md.c:367 -#: storage/smgr/md.c:363 -#, c-format -msgid "could not open relation %u/%u/%u: %m" -msgstr "無法開啟relation %u/%u/%u：%m" - -# storage/smgr/md.c:769 -#: storage/smgr/md.c:765 -#, c-format -msgid "could not fsync segment %u of relation %u/%u/%u: %m" -msgstr "" - -# storage/smgr/md.c:959 -#: storage/smgr/md.c:955 -#, c-format -msgid "could not open segment %u of relation %u/%u/%u (target block %u): %m" -msgstr "" - -# storage/smgr/smgr.c:239 -#: storage/smgr/smgr.c:239 -#, c-format -msgid "could not close relation %u/%u/%u: %m" -msgstr "無法關閉relation %u/%u/%u：%m" - -# storage/smgr/smgr.c:333 -#: storage/smgr/smgr.c:333 -#, c-format -msgid "could not create relation %u/%u/%u: %m" -msgstr "無法建立relation %u/%u/%u：%m" - -# storage/smgr/smgr.c:333 -#: storage/smgr/smgr.c:457 -#, c-format -msgid "could not remove relation %u/%u/%u: %m" -msgstr "無法刪除relation %u/%u/%u：%m" - -# storage/smgr/smgr.c:478 -#: storage/smgr/smgr.c:478 -#, c-format -msgid "could not extend relation %u/%u/%u: %m" -msgstr "無法擴展relation %u/%u/%u：%m" - -# storage/smgr/smgr.c:482 -#: storage/smgr/smgr.c:482 -msgid "Check free disk space." -msgstr "檢查可用磁碟空間。" - -# storage/smgr/smgr.c:499 -#: storage/smgr/smgr.c:499 -#, c-format -msgid "could not read block %u of relation %u/%u/%u: %m" -msgstr "" - -# storage/smgr/smgr.c:524 -#: storage/smgr/smgr.c:524 -#, c-format -msgid "could not write block %u of relation %u/%u/%u: %m" -msgstr "" - -# storage/smgr/smgr.c:554 -#: storage/smgr/smgr.c:554 -#, c-format -msgid "could not count blocks of relation %u/%u/%u: %m" -msgstr "" - -# storage/smgr/smgr.c:587 storage/smgr/smgr.c:871 -#: storage/smgr/smgr.c:587 storage/smgr/smgr.c:871 -#, c-format -msgid "could not truncate relation %u/%u/%u to %u blocks: %m" -msgstr "" - -# storage/smgr/smgr.c:644 -#: storage/smgr/smgr.c:644 -#, c-format -msgid "could not sync relation %u/%u/%u: %m" -msgstr "" - -# tcop/postgres.c:334 tcop/postgres.c:346 tcop/postgres.c:357 -# tcop/postgres.c:369 tcop/postgres.c:3162 -#: tcop/postgres.c:337 tcop/postgres.c:349 tcop/postgres.c:360 -#: tcop/postgres.c:372 tcop/postgres.c:3218 -#, c-format -msgid "invalid frontend message type %d" -msgstr "" - -# tcop/postgres.c:468 tcop/postgres.c:503 tcop/postgres.c:514 -#: tcop/postgres.c:473 tcop/postgres.c:510 tcop/postgres.c:522 -#, c-format -msgid "statement: %s" -msgstr "" - -# tcop/fastpath.c:304 tcop/postgres.c:845 tcop/postgres.c:1166 -# tcop/postgres.c:1650 -#: tcop/fastpath.c:304 tcop/postgres.c:854 tcop/postgres.c:1176 -#: tcop/postgres.c:1660 -msgid "" -"current transaction is aborted, commands ignored until end of transaction " -"block" -msgstr "" - -# tcop/postgres.c:1008 -#: tcop/postgres.c:1018 -#, c-format -msgid "duration: %ld.%03ld ms" -msgstr "" - -# tcop/postgres.c:1021 -#: tcop/postgres.c:1031 -#, c-format -msgid "duration: %ld.%03ld ms statement: %s" -msgstr "" - -# tcop/postgres.c:1129 -#: tcop/postgres.c:1139 -msgid "cannot insert multiple commands into a prepared statement" -msgstr "" - -# tcop/postgres.c:1332 -#: tcop/postgres.c:1342 -#, c-format -msgid "bind message has %d parameter formats but %d parameters" -msgstr "" - -# tcop/postgres.c:1345 tcop/postgres.c:1727 -#: tcop/postgres.c:1355 tcop/postgres.c:1737 -msgid "unnamed prepared statement does not exist" -msgstr "" - -# tcop/postgres.c:1351 -#: tcop/postgres.c:1361 -#, c-format -msgid "" -"bind message supplies %d parameters, but prepared statement \"%s\" requires %" -"d" -msgstr "" - -# tcop/postgres.c:1473 -#: tcop/postgres.c:1483 -#, c-format -msgid "incorrect binary data format in bind parameter %d" -msgstr "" - -# tcop/postgres.c:1581 tcop/postgres.c:1780 -#: tcop/postgres.c:1591 tcop/postgres.c:1790 -#, c-format -msgid "portal \"%s\" does not exist" -msgstr "portal \"%s\"不存在" - -# tcop/postgres.c:1874 -#: tcop/postgres.c:1884 -msgid "terminating connection because of crash of another server process" -msgstr "" - -# tcop/postgres.c:1875 -#: tcop/postgres.c:1885 -msgid "" -"The postmaster has commanded this server process to roll back the current " -"transaction and exit, because another server process exited abnormally and " -"possibly corrupted shared memory." -msgstr "" - -# tcop/postgres.c:1879 -#: tcop/postgres.c:1889 -msgid "" -"In a moment you should be able to reconnect to the database and repeat your " -"command." -msgstr "" - -# tcop/postgres.c:1995 -#: tcop/postgres.c:2005 -msgid "floating-point exception" -msgstr "發生浮點數例外" - -# tcop/postgres.c:1996 -#: tcop/postgres.c:2006 -msgid "" -"An invalid floating-point operation was signaled. This probably means an out-" -"of-range result or an invalid operation, such as division by zero." -msgstr "" - -# tcop/postgres.c:2032 -#: tcop/postgres.c:2042 -msgid "terminating connection due to administrator command" -msgstr "因管理命令中斷連線" - -# tcop/postgres.c:2042 -#: tcop/postgres.c:2052 -msgid "canceling query due to user request" -msgstr "使用者要求取消查詢" - -# tcop/postgres.c:2093 -#: tcop/postgres.c:2103 -msgid "stack depth limit exceeded" -msgstr "超過堆疊深度限制" - -# tcop/postgres.c:2094 -#: tcop/postgres.c:2104 -msgid "Increase the configuration parameter \"max_stack_depth\"." -msgstr "" - -# tcop/postgres.c:2112 -#: tcop/postgres.c:2122 -#, c-format -msgid "" -"%s is the PostgreSQL stand-alone backend. It is not\n" -"intended to be used by normal users.\n" -"\n" -msgstr "" - -# tcop/postgres.c:2114 -#: tcop/postgres.c:2124 -#, c-format -msgid "" -"Usage:\n" -" %s [OPTION]... [DBNAME]\n" -"\n" -msgstr "" -"使用方法：\n" -" %s [選項]... [資料庫名稱]\n" -"\n" - -# tcop/postgres.c:2121 -#: tcop/postgres.c:2131 -msgid " -d 0-5 debugging level (0 is off)\n" -msgstr " -d 0-5 除錯等級(0是關閉)\n" - -# tcop/postgres.c:2123 -#: tcop/postgres.c:2133 -msgid " -e use European date input format (DMY)\n" -msgstr " -e 使用歐洲日期輸入格式(DMY)\n" - -# tcop/postgres.c:2124 -#: tcop/postgres.c:2134 -msgid " -E echo query before execution\n" -msgstr " -E 顯示將要執行的查詢\n" - -# tcop/postgres.c:2126 -#: tcop/postgres.c:2136 -msgid " -N do not use newline as interactive query delimiter\n" -msgstr " -N 在互動模式不使用換行符號做為查詢分隔符號\n" - -# tcop/postgres.c:2127 -#: tcop/postgres.c:2137 -msgid " -o FILENAME send stdout and stderr to given file\n" -msgstr " -o 檔案名稱 將stdout和stderr寫入檔案\n" - -# tcop/postgres.c:2128 -#: tcop/postgres.c:2138 -msgid " -P disable system indexes\n" -msgstr " -P 關閉系統索引\n" - -# tcop/postgres.c:2129 -#: tcop/postgres.c:2139 -msgid " -s show statistics after each query\n" -msgstr " -s 執行每個查詢之後顯示統計資料\n" - -# tcop/postgres.c:2130 -#: tcop/postgres.c:2140 -msgid " -S WORK-MEM set amount of memory for sorts (in kB)\n" -msgstr " -S WORK-MEM 設定排序可用的記憶體(單位是KB)\n" - -# tcop/postgres.c:2131 -#: tcop/postgres.c:2141 -msgid " --describe-config describe configuration parameters, then exit\n" -msgstr "" - -# tcop/postgres.c:2135 -#: tcop/postgres.c:2145 -msgid " -f s|i|n|m|h forbid use of some plan types\n" -msgstr "" - -# tcop/postgres.c:2136 -#: tcop/postgres.c:2146 -msgid " -i do not execute queries\n" -msgstr " -i 不執行查詢\n" - -# tcop/postgres.c:2137 -#: tcop/postgres.c:2147 -msgid " -O allow system table structure changes\n" -msgstr " -O 允許修改系統資料表結構\n" - -# tcop/postgres.c:2138 -#: tcop/postgres.c:2148 -msgid " -t pa|pl|ex show timings after each query\n" -msgstr " -t pa|pl|ex 執行每個查詢之後顯示執行時間\n" - -# tcop/postgres.c:2139 -#: tcop/postgres.c:2149 -msgid " -W NUM wait NUM seconds to allow attach from a debugger\n" -msgstr " -W NUM 等待NUM秒，讓除錯器可以連結\n" - -# tcop/postgres.c:2140 -#: tcop/postgres.c:2150 -msgid "" -"\n" -"Report bugs to .\n" -msgstr "" -"\n" -"回報錯誤給。\n" - -# tcop/postgres.c:2262 -#: tcop/postgres.c:2314 -msgid "assert checking is not compiled in" -msgstr "編譯時未加入assert檢查。" - -# tcop/postgres.c:2635 -#: tcop/postgres.c:2652 -msgid "invalid command-line arguments for server process" -msgstr "給伺服器行程的命令列引數不合法" - -# tcop/postgres.c:2636 tcop/postgres.c:2652 -#: tcop/postgres.c:2653 tcop/postgres.c:2669 -#, c-format -msgid "Try \"%s --help\" for more information." -msgstr "執行\"%s --help\"顯示更多資訊。" - -# tcop/postgres.c:2650 -#: tcop/postgres.c:2667 -#, c-format -msgid "%s: invalid command-line arguments" -msgstr "%s：不合法的命令列引數" - -# tcop/postgres.c:2660 -#: tcop/postgres.c:2677 -#, c-format -msgid "%s: no database nor user name specified" -msgstr "%s：未指定資料庫和使用者名稱" - -# tcop/postgres.c:3075 -#: tcop/postgres.c:3131 -#, c-format -msgid "invalid CLOSE message subtype %d" -msgstr "" - -# tcop/postgres.c:3105 -#: tcop/postgres.c:3161 -#, c-format -msgid "invalid DESCRIBE message subtype %d" -msgstr "" - -# tcop/postgres.c:3346 -#: tcop/postgres.c:3402 -#, c-format -msgid "disconnection: session time: %s%s%s%s%s" -msgstr "" - -# tcop/fastpath.c:106 tcop/fastpath.c:444 tcop/fastpath.c:567 -#: tcop/fastpath.c:106 tcop/fastpath.c:444 tcop/fastpath.c:567 -#, c-format -msgid "invalid argument size %d in function call message" -msgstr "" - -# tcop/fastpath.c:414 tcop/fastpath.c:537 -#: tcop/fastpath.c:414 tcop/fastpath.c:537 -#, c-format -msgid "function call message contains %d arguments but function requires %d" -msgstr "" - -# tcop/fastpath.c:422 -#: tcop/fastpath.c:422 -#, c-format -msgid "function call message contains %d argument formats but %d arguments" -msgstr "" - -# tcop/fastpath.c:505 tcop/fastpath.c:590 -#: tcop/fastpath.c:505 tcop/fastpath.c:590 -#, c-format -msgid "incorrect binary data format in function argument %d" -msgstr "" - -# tcop/pquery.c:448 -#: tcop/pquery.c:448 -#, c-format -msgid "bind message has %d result formats but query has %d columns" -msgstr "" - -# tcop/pquery.c:771 -#: tcop/pquery.c:771 -msgid "cursor can only scan forward" -msgstr "cursor只能向前掃描" - -# tcop/pquery.c:772 -#: tcop/pquery.c:772 -msgid "Declare it with SCROLL option to enable backward scan." -msgstr "" - -# tcop/utility.c:77 -#: tcop/utility.c:77 -#, c-format -msgid "table \"%s\" does not exist" -msgstr "資料表\"%s\"不存在" - -# tcop/utility.c:79 -#: tcop/utility.c:79 -msgid "Use DROP TABLE to remove a table." -msgstr "使用DROP TABLE刪除資料表。" - -# tcop/utility.c:82 -#: tcop/utility.c:82 -#, c-format -msgid "sequence \"%s\" does not exist" -msgstr "sequence \"%s\"不存在" - -# tcop/utility.c:84 -#: tcop/utility.c:84 -msgid "Use DROP SEQUENCE to remove a sequence." -msgstr "使用DROP SEQUENCE刪除sequence。" - -# tcop/utility.c:87 -#: tcop/utility.c:87 -#, c-format -msgid "view \"%s\" does not exist" -msgstr "view \"%s\"不存在" - -# tcop/utility.c:89 -#: tcop/utility.c:89 -msgid "Use DROP VIEW to remove a view." -msgstr "使用DROP VIEW刪除view。" - -# tcop/utility.c:92 -#: tcop/utility.c:92 -#, c-format -msgid "index \"%s\" does not exist" -msgstr "索引\"%s\"不存在" - -# tcop/utility.c:94 -#: tcop/utility.c:94 -msgid "Use DROP INDEX to remove an index." -msgstr "使用DROP INDEX刪除索引。" - -# tcop/utility.c:98 -#: tcop/utility.c:98 -#, c-format -msgid "\"%s\" is not a type" -msgstr "\"%s\"不是資料型別" - -# tcop/utility.c:99 -#: tcop/utility.c:99 -msgid "Use DROP TYPE to remove a type." -msgstr "使用DROP TYPE刪除資料型別。" - -# tcop/utility.c:973 -#: tcop/utility.c:973 -msgid "must be superuser to do CHECKPOINT" -msgstr "只有管理者能用CHECKPOINT" - -# utils/adt/array_userfuncs.c:50 -#: utils/adt/array_userfuncs.c:50 -msgid "could not determine input data types" -msgstr "無法識別輸入資料型別" - -# utils/adt/array_userfuncs.c:72 -#: utils/adt/array_userfuncs.c:72 -msgid "neither input type is an array" -msgstr "" - -# utils/adt/array_userfuncs.c:99 -#: utils/adt/array_userfuncs.c:99 -msgid "argument must be empty or one-dimensional array" -msgstr "" - -# utils/adt/array_userfuncs.c:198 utils/adt/array_userfuncs.c:210 -# utils/adt/array_userfuncs.c:247 utils/adt/array_userfuncs.c:280 -# utils/adt/array_userfuncs.c:308 -#: utils/adt/array_userfuncs.c:198 utils/adt/array_userfuncs.c:210 -#: utils/adt/array_userfuncs.c:247 utils/adt/array_userfuncs.c:280 -#: utils/adt/array_userfuncs.c:308 -msgid "cannot concatenate incompatible arrays" -msgstr "無法串接型別不符的陣列" - -# utils/adt/array_userfuncs.c:199 -#: utils/adt/array_userfuncs.c:199 -#, c-format -msgid "Arrays of %d and %d dimensions are not compatible for concatenation." -msgstr "" - -# utils/adt/array_userfuncs.c:211 -#: utils/adt/array_userfuncs.c:211 -#, c-format -msgid "" -"Arrays with element types %s and %s are not compatible for concatenation." -msgstr "" - -# utils/adt/array_userfuncs.c:248 -#: utils/adt/array_userfuncs.c:248 -msgid "" -"Arrays with differing element dimensions are not compatible for " -"concatenation." -msgstr "" - -# utils/adt/array_userfuncs.c:281 utils/adt/array_userfuncs.c:309 -#: utils/adt/array_userfuncs.c:281 utils/adt/array_userfuncs.c:309 -msgid "Arrays with differing dimensions are not compatible for concatenation." -msgstr "" - -# utils/adt/array_userfuncs.c:354 -#: utils/adt/array_userfuncs.c:354 -#, c-format -msgid "invalid array element type OID: %u" -msgstr "無效的陣列元素型別OID：%u" - -# utils/adt/array_userfuncs.c:358 utils/adt/arrayfuncs.c:1149 -# utils/adt/arrayfuncs.c:2417 -#: utils/adt/array_userfuncs.c:358 utils/adt/arrayfuncs.c:1149 -#: utils/adt/arrayfuncs.c:2417 -#, c-format -msgid "invalid number of dimensions: %d" -msgstr "無效的維度數值：%d" - -# utils/adt/acl.c:109 utils/adt/name.c:90 -#: utils/adt/acl.c:109 utils/adt/name.c:90 -msgid "identifier too long" -msgstr "識別字過長" - -# utils/adt/acl.c:110 utils/adt/name.c:91 -#: utils/adt/acl.c:110 utils/adt/name.c:91 -#, c-format -msgid "Identifier must be less than %d characters." -msgstr "識別字必須少於 %d 個字元。" - -# utils/adt/acl.c:197 -#: utils/adt/acl.c:197 -#, c-format -msgid "unrecognized key word: \"%s\"" -msgstr "" - -# utils/adt/acl.c:198 -#: utils/adt/acl.c:198 -msgid "ACL key word must be \"group\" or \"user\"." -msgstr "" - -# utils/adt/acl.c:203 -#: utils/adt/acl.c:203 -msgid "missing name" -msgstr "缺少名稱" - -# utils/adt/acl.c:204 -#: utils/adt/acl.c:204 -msgid "A name must follow the \"group\" or \"user\" key word." -msgstr "" - -# utils/adt/acl.c:212 -#: utils/adt/acl.c:212 -msgid "missing \"=\" sign" -msgstr "缺少\"=\"符號" - -# utils/adt/acl.c:259 -#: utils/adt/acl.c:259 -#, c-format -msgid "invalid mode character: must be one of \"%s\"" -msgstr "" - -# utils/adt/acl.c:289 -#: utils/adt/acl.c:289 -msgid "a name must follow the \"/\" sign" -msgstr "" - -# utils/adt/acl.c:298 -#: utils/adt/acl.c:298 -#, c-format -msgid "defaulting grantor to user ID %u" -msgstr "" - -# utils/adt/acl.c:357 -#: utils/adt/acl.c:357 -msgid "extra garbage at the end of the ACL specification" -msgstr "" - -# utils/adt/acl.c:895 -#: utils/adt/acl.c:895 -msgid "grant options cannot be granted back to your own grantor" -msgstr "" - -# utils/adt/acl.c:954 -#: utils/adt/acl.c:954 -msgid "dependent privileges exist" -msgstr "" - -# utils/adt/acl.c:955 -#: utils/adt/acl.c:955 -msgid "Use CASCADE to revoke them too." -msgstr "" - -# utils/adt/acl.c:1124 -#: utils/adt/acl.c:1124 -#, c-format -msgid "group with ID %u does not exist" -msgstr "ID為%u的群組不存在" - -# utils/adt/acl.c:1137 -#: utils/adt/acl.c:1137 -msgid "aclinsert is no longer supported" -msgstr "aclinsert已經不被支援" - -# utils/adt/acl.c:1147 -#: utils/adt/acl.c:1147 -msgid "aclremove is no longer supported" -msgstr "aclremove已經不被支援" - -# utils/adt/acl.c:1199 -#: utils/adt/acl.c:1199 -msgid "cannot specify both user and group" -msgstr "不能同時指定使用者和群組" - -# utils/adt/acl.c:1261 utils/adt/acl.c:1486 utils/adt/acl.c:1698 -# utils/adt/acl.c:1902 utils/adt/acl.c:2106 utils/adt/acl.c:2315 -# utils/adt/acl.c:2516 -#: utils/adt/acl.c:1261 utils/adt/acl.c:1486 utils/adt/acl.c:1698 -#: utils/adt/acl.c:1902 utils/adt/acl.c:2106 utils/adt/acl.c:2315 -#: utils/adt/acl.c:2516 -#, c-format -msgid "unrecognized privilege type: \"%s\"" -msgstr "" - -# utils/adt/acl.c:1875 utils/adt/regproc.c:117 utils/adt/regproc.c:138 -# utils/adt/regproc.c:290 -#: utils/adt/acl.c:1875 utils/adt/regproc.c:117 utils/adt/regproc.c:138 -#: utils/adt/regproc.c:290 -#, c-format -msgid "function \"%s\" does not exist" -msgstr "函式\"%s\"不存在" - -# utils/adt/like.c:453 utils/adt/like_match.c:291 utils/adt/regexp.c:461 -#: utils/adt/like.c:453 utils/adt/like_match.c:291 utils/adt/regexp.c:480 -msgid "invalid escape string" -msgstr "" - -# utils/adt/like.c:454 utils/adt/like_match.c:292 utils/adt/regexp.c:462 -#: utils/adt/like.c:454 utils/adt/like_match.c:292 utils/adt/regexp.c:481 -msgid "Escape string must be empty or one character." -msgstr "" - -# utils/adt/arrayfuncs.c:223 utils/adt/arrayfuncs.c:235 -#: utils/adt/arrayfuncs.c:223 utils/adt/arrayfuncs.c:235 -msgid "missing dimension value" -msgstr "缺少維度值" - -# utils/adt/arrayfuncs.c:245 -#: utils/adt/arrayfuncs.c:245 -msgid "missing \"]\" in array dimensions" -msgstr "陣列維度缺少 \"]\"" - -# utils/adt/arrayfuncs.c:253 -#: utils/adt/arrayfuncs.c:253 -msgid "upper bound cannot be less than lower bound" -msgstr "上界不能少於下界" - -# utils/adt/arrayfuncs.c:265 utils/adt/arrayfuncs.c:291 -#: utils/adt/arrayfuncs.c:265 utils/adt/arrayfuncs.c:291 -msgid "array value must start with \"{\" or dimension information" -msgstr "陣列值必須以 \"{\" 或維度數起始" - -# utils/adt/arrayfuncs.c:279 -#: utils/adt/arrayfuncs.c:279 -msgid "missing assignment operator" -msgstr "缺少賦值運算子" - -# utils/adt/arrayfuncs.c:296 utils/adt/arrayfuncs.c:302 -#: utils/adt/arrayfuncs.c:296 utils/adt/arrayfuncs.c:302 -msgid "array dimensions incompatible with array literal" -msgstr "" - -# utils/adt/arrayfuncs.c:328 -#: utils/adt/arrayfuncs.c:328 -msgid "missing left brace" -msgstr "缺少左大括號" - -# utils/adt/arrayfuncs.c:409 utils/adt/arrayfuncs.c:424 -# utils/adt/arrayfuncs.c:433 utils/adt/arrayfuncs.c:447 -# utils/adt/arrayfuncs.c:467 utils/adt/arrayfuncs.c:495 -# utils/adt/arrayfuncs.c:500 utils/adt/arrayfuncs.c:540 -# utils/adt/arrayfuncs.c:561 utils/adt/arrayfuncs.c:580 -# utils/adt/arrayfuncs.c:673 utils/adt/arrayfuncs.c:682 -# utils/adt/arrayfuncs.c:710 utils/adt/arrayfuncs.c:725 -# utils/adt/arrayfuncs.c:778 -#: utils/adt/arrayfuncs.c:409 utils/adt/arrayfuncs.c:424 -#: utils/adt/arrayfuncs.c:433 utils/adt/arrayfuncs.c:447 -#: utils/adt/arrayfuncs.c:467 utils/adt/arrayfuncs.c:495 -#: utils/adt/arrayfuncs.c:500 utils/adt/arrayfuncs.c:540 -#: utils/adt/arrayfuncs.c:561 utils/adt/arrayfuncs.c:580 -#: utils/adt/arrayfuncs.c:673 utils/adt/arrayfuncs.c:682 -#: utils/adt/arrayfuncs.c:710 utils/adt/arrayfuncs.c:725 -#: utils/adt/arrayfuncs.c:778 -#, c-format -msgid "malformed array literal: \"%s\"" -msgstr "陣列實量格式錯誤: \"%s\"" - -# utils/adt/arrayfuncs.c:1160 -#: utils/adt/arrayfuncs.c:1160 -msgid "invalid array flags" -msgstr "不合法的陣列旗標" - -# utils/adt/arrayfuncs.c:1168 -#: utils/adt/arrayfuncs.c:1168 -msgid "wrong element type" -msgstr "錯誤的元素型別" - -# utils/adt/arrayfuncs.c:1211 utils/cache/lsyscache.c:1756 -#: utils/adt/arrayfuncs.c:1211 utils/cache/lsyscache.c:1764 -#, c-format -msgid "no binary input function available for type %s" -msgstr "" - -# utils/adt/arrayfuncs.c:1304 -#: utils/adt/arrayfuncs.c:1304 -#, c-format -msgid "improper binary format in array element %d" -msgstr "" - -# utils/adt/arrayfuncs.c:1383 utils/cache/lsyscache.c:1792 -#: utils/adt/arrayfuncs.c:1383 utils/cache/lsyscache.c:1800 -#, c-format -msgid "no binary output function available for type %s" -msgstr "" - -# utils/adt/arrayfuncs.c:1657 -#: utils/adt/arrayfuncs.c:1657 -msgid "slices of fixed-length arrays not implemented" -msgstr "" - -# utils/adt/arrayfuncs.c:1795 utils/adt/arrayfuncs.c:1800 -# utils/adt/arrayfuncs.c:1840 utils/adt/arrayfuncs.c:1862 -# utils/adt/arrayfuncs.c:1874 utils/adt/arrayfuncs.c:2035 -# utils/adt/arrayfuncs.c:2052 utils/adt/arrayfuncs.c:2063 -# utils/adt/arrayfuncs.c:2072 utils/adt/arrayfuncs.c:2083 -#: utils/adt/arrayfuncs.c:1795 utils/adt/arrayfuncs.c:1800 -#: utils/adt/arrayfuncs.c:1840 utils/adt/arrayfuncs.c:1862 -#: utils/adt/arrayfuncs.c:1874 utils/adt/arrayfuncs.c:2035 -#: utils/adt/arrayfuncs.c:2052 utils/adt/arrayfuncs.c:2063 -#: utils/adt/arrayfuncs.c:2072 utils/adt/arrayfuncs.c:2083 -msgid "invalid array subscripts" -msgstr "" - -# utils/adt/arrayfuncs.c:1991 -#: utils/adt/arrayfuncs.c:1991 -msgid "updates on slices of fixed-length arrays not implemented" -msgstr "" - -# utils/adt/arrayfuncs.c:2026 utils/adt/arrayfuncs.c:2095 -#: utils/adt/arrayfuncs.c:2026 utils/adt/arrayfuncs.c:2095 -msgid "source array too small" -msgstr "來源陣列太小" - -# utils/adt/arrayfuncs.c:2319 utils/adt/arrayfuncs.c:3321 -#: utils/adt/arrayfuncs.c:2319 utils/adt/arrayfuncs.c:3321 -msgid "null array elements not supported" -msgstr "不支援空陣列元素" - -# utils/adt/arrayfuncs.c:2559 utils/adt/arrayfuncs.c:2714 -#: utils/adt/arrayfuncs.c:2559 utils/adt/arrayfuncs.c:2714 -msgid "cannot compare arrays of different element types" -msgstr "無法比較元素型別不同的陣列" - -# utils/adt/arrayfuncs.c:2731 -#: utils/adt/arrayfuncs.c:2731 -#, c-format -msgid "could not identify a comparison function for type %s" -msgstr "" - -# utils/adt/arrayfuncs.c:3130 -#: utils/adt/arrayfuncs.c:3130 -msgid "could not determine target array type" -msgstr "無法確認目標陣列型別" - -# utils/adt/arrayfuncs.c:3136 -#: utils/adt/arrayfuncs.c:3136 -msgid "target type is not an array" -msgstr "目標型別不是陣列" - -# utils/adt/arrayfuncs.c:3148 -#: utils/adt/arrayfuncs.c:3148 -msgid "array coercion to domain type elements not currently supported" -msgstr "" - -# utils/adt/ascii.c:68 -#: utils/adt/ascii.c:68 -#, c-format -msgid "encoding conversion from %s to ASCII not supported" -msgstr "不支援由 %s 到 ASCII 的編碼轉換" - -# utils/adt/bool.c:80 -#: utils/adt/bool.c:80 -#, c-format -msgid "invalid input syntax for type boolean: \"%s\"" -msgstr "無效的 boolean 型別輸入語法: \"%s\"" - -# utils/adt/cash.c:198 -#: utils/adt/cash.c:198 -#, c-format -msgid "invalid input syntax for type money: \"%s\"" -msgstr "無效的 money 型別輸入語法: \"%s\"" - -# utils/adt/cash.c:496 utils/adt/cash.c:548 utils/adt/cash.c:601 -# utils/adt/cash.c:653 utils/adt/float.c:795 utils/adt/float.c:859 -# utils/adt/float.c:2117 utils/adt/float.c:2179 utils/adt/geo_ops.c:3832 -# utils/adt/int.c:705 utils/adt/int.c:830 utils/adt/int.c:920 -# utils/adt/int.c:1001 utils/adt/int.c:1025 utils/adt/int.c:1040 -# utils/adt/int.c:1055 utils/adt/int.c:1070 utils/adt/int8.c:597 -# utils/adt/int8.c:642 utils/adt/int8.c:765 utils/adt/int8.c:855 -# utils/adt/numeric.c:3820 utils/adt/timestamp.c:2197 -#: utils/adt/cash.c:496 utils/adt/cash.c:548 utils/adt/cash.c:601 -#: utils/adt/cash.c:653 utils/adt/float.c:795 utils/adt/float.c:859 -#: utils/adt/float.c:2117 utils/adt/float.c:2179 utils/adt/geo_ops.c:3832 -#: utils/adt/int.c:705 utils/adt/int.c:830 utils/adt/int.c:920 -#: utils/adt/int.c:1001 utils/adt/int.c:1025 utils/adt/int.c:1040 -#: utils/adt/int.c:1055 utils/adt/int.c:1070 utils/adt/int8.c:597 -#: utils/adt/int8.c:642 utils/adt/int8.c:765 utils/adt/int8.c:855 -#: utils/adt/numeric.c:3820 utils/adt/timestamp.c:2197 -msgid "division by zero" -msgstr "除以 0" - -# utils/adt/char.c:177 -#: utils/adt/char.c:177 -msgid "\"char\" out of range" -msgstr "\"char\"超過範圍" - -# utils/adt/date.c:87 utils/adt/datetime.c:1313 utils/adt/datetime.c:2088 -#: utils/adt/date.c:87 utils/adt/datetime.c:1313 utils/adt/datetime.c:2078 -msgid "date/time value \"current\" is no longer supported" -msgstr "date/time 的值 \"current\" 已不再受支援" - -# utils/adt/date.c:732 utils/adt/date.c:775 utils/adt/date.c:1337 -# utils/adt/date.c:1374 utils/adt/date.c:2252 utils/adt/formatting.c:2894 -# utils/adt/formatting.c:2919 utils/adt/formatting.c:2978 -# utils/adt/nabstime.c:570 utils/adt/nabstime.c:613 utils/adt/nabstime.c:643 -# utils/adt/nabstime.c:686 utils/adt/timestamp.c:153 -# utils/adt/timestamp.c:187 utils/adt/timestamp.c:395 -# utils/adt/timestamp.c:431 utils/adt/timestamp.c:1929 -# utils/adt/timestamp.c:1950 utils/adt/timestamp.c:2008 -# utils/adt/timestamp.c:2031 utils/adt/timestamp.c:2413 -# utils/adt/timestamp.c:2524 utils/adt/timestamp.c:2746 -# utils/adt/timestamp.c:2819 utils/adt/timestamp.c:2865 -# utils/adt/timestamp.c:2949 utils/adt/timestamp.c:3232 -# utils/adt/timestamp.c:3365 utils/adt/timestamp.c:3372 -# utils/adt/timestamp.c:3385 utils/adt/timestamp.c:3393 -# utils/adt/timestamp.c:3456 utils/adt/timestamp.c:3587 -# utils/adt/timestamp.c:3595 utils/adt/timestamp.c:3862 -# utils/adt/timestamp.c:3869 utils/adt/timestamp.c:3897 -# utils/adt/timestamp.c:3901 -#: utils/adt/date.c:732 utils/adt/date.c:775 utils/adt/date.c:1337 -#: utils/adt/date.c:1374 utils/adt/date.c:2252 utils/adt/formatting.c:2895 -#: utils/adt/formatting.c:2920 utils/adt/formatting.c:2979 -#: utils/adt/nabstime.c:570 utils/adt/nabstime.c:613 utils/adt/nabstime.c:643 -#: utils/adt/nabstime.c:686 utils/adt/timestamp.c:153 -#: utils/adt/timestamp.c:187 utils/adt/timestamp.c:395 -#: utils/adt/timestamp.c:431 utils/adt/timestamp.c:1929 -#: utils/adt/timestamp.c:1950 utils/adt/timestamp.c:2008 -#: utils/adt/timestamp.c:2031 utils/adt/timestamp.c:2413 -#: utils/adt/timestamp.c:2524 utils/adt/timestamp.c:2746 -#: utils/adt/timestamp.c:2819 utils/adt/timestamp.c:2866 -#: utils/adt/timestamp.c:2962 utils/adt/timestamp.c:3245 -#: utils/adt/timestamp.c:3378 utils/adt/timestamp.c:3385 -#: utils/adt/timestamp.c:3398 utils/adt/timestamp.c:3406 -#: utils/adt/timestamp.c:3469 utils/adt/timestamp.c:3604 -#: utils/adt/timestamp.c:3612 utils/adt/timestamp.c:3879 -#: utils/adt/timestamp.c:3886 utils/adt/timestamp.c:3914 -#: utils/adt/timestamp.c:3918 -msgid "timestamp out of range" -msgstr "timestamp超過範圍" - -# utils/adt/date.c:802 -#: utils/adt/date.c:802 -msgid "cannot convert reserved abstime value to date" -msgstr "" - -# utils/adt/date.c:863 -#: utils/adt/date.c:863 -#, c-format -msgid "invalid input syntax for type date: \"%s\"" -msgstr "無效的 date 型別輸入語法: \"%s\"" - -# utils/adt/date.c:1579 -#: utils/adt/date.c:1579 -#, c-format -msgid "invalid input syntax for type time: \"%s\"" -msgstr "無效的 time 型別輸入語法: \"%s\"" - -# utils/adt/date.c:1671 utils/adt/date.c:1690 -#: utils/adt/date.c:1671 utils/adt/date.c:1690 -#, c-format -msgid "\"time\" units \"%s\" not recognized" -msgstr "" - -# utils/adt/date.c:2330 -#: utils/adt/date.c:2330 -#, c-format -msgid "invalid input syntax for type time with time zone: \"%s\"" -msgstr "無效的 time 型別帶時區輸入語法: \"%s\"" - -# utils/adt/date.c:2436 utils/adt/date.c:2455 -#: utils/adt/date.c:2436 utils/adt/date.c:2455 -#, c-format -msgid "\"time with time zone\" units \"%s\" not recognized" -msgstr "" - -# utils/adt/date.c:2510 utils/adt/timestamp.c:3793 utils/adt/timestamp.c:3942 -#: utils/adt/date.c:2510 utils/adt/timestamp.c:3810 utils/adt/timestamp.c:3959 -#, c-format -msgid "time zone \"%s\" not recognized" -msgstr "無法識別的時區\"%s\"" - -# utils/adt/date.c:2532 -#: utils/adt/date.c:2532 -#, c-format -msgid "\"interval\" time zone \"%s\" not valid" -msgstr "\"interval\" 時區 \"%s\" 無效" - -# utils/adt/datetime.c:1495 utils/adt/datetime.c:2370 -# utils/adt/formatting.c:3180 -#: utils/adt/datetime.c:1495 utils/adt/datetime.c:2360 -#: utils/adt/formatting.c:3181 -#, c-format -msgid "inconsistent use of year %04d and \"BC\"" -msgstr "" - -# utils/adt/datetime.c:3315 utils/adt/datetime.c:3322 -#: utils/adt/datetime.c:3305 utils/adt/datetime.c:3312 -#, c-format -msgid "date/time field value out of range: \"%s\"" -msgstr "date/time 欄位值超出範圍: \"%s\"" - -# utils/adt/datetime.c:3324 -#: utils/adt/datetime.c:3314 -msgid "Perhaps you need a different \"datestyle\" setting." -msgstr "或許您需要一個不同的 \"datestyle\" 設定。" - -# utils/adt/datetime.c:3329 -#: utils/adt/datetime.c:3319 -#, c-format -msgid "interval field value out of range: \"%s\"" -msgstr "interval 欄位值超出範圍: \"%s\"" - -# utils/adt/datetime.c:3335 -#: utils/adt/datetime.c:3325 -#, c-format -msgid "time zone displacement out of range: \"%s\"" -msgstr "" - -# translator: first %s is inet or cidr -# translator: first %s is inet or cidr -# utils/adt/datetime.c:3342 utils/adt/network.c:93 -#. translator: first %s is inet or cidr -#: utils/adt/datetime.c:3332 utils/adt/network.c:93 -#, c-format -msgid "invalid input syntax for type %s: \"%s\"" -msgstr "" - -# utils/adt/datum.c:80 utils/adt/datum.c:92 -#: utils/adt/datum.c:80 utils/adt/datum.c:92 -msgid "invalid Datum pointer" -msgstr "無效的Datum指標" - -# utils/adt/encode.c:55 utils/adt/encode.c:91 -#: utils/adt/encode.c:55 utils/adt/encode.c:91 -#, c-format -msgid "unrecognized encoding: \"%s\"" -msgstr "無法識別的編碼: \"%s\"" - -# utils/adt/encode.c:150 -#: utils/adt/encode.c:150 -#, c-format -msgid "invalid hexadecimal digit: \"%c\"" -msgstr "無效的十六進位數字: \"%c\"" - -# utils/adt/encode.c:178 -#: utils/adt/encode.c:178 -msgid "invalid hexadecimal data: odd number of digits" -msgstr "無效的十六進位資料: 奇數個數字" - -# utils/adt/encode.c:295 -#: utils/adt/encode.c:295 -msgid "unexpected \"=\"" -msgstr "預期外的\"=\"" - -# utils/adt/encode.c:307 -#: utils/adt/encode.c:307 -msgid "invalid symbol" -msgstr "不合法的符號" - -# utils/adt/encode.c:327 -#: utils/adt/encode.c:327 -msgid "invalid end sequence" -msgstr "" - -# utils/adt/encode.c:436 utils/adt/encode.c:501 utils/adt/varlena.c:118 -# utils/adt/varlena.c:158 -#: utils/adt/encode.c:436 utils/adt/encode.c:501 utils/adt/varlena.c:118 -#: utils/adt/varlena.c:158 -msgid "invalid input syntax for type bytea" -msgstr "" - -# utils/adt/float.c:219 -#: utils/adt/float.c:219 -msgid "type \"real\" value out of range: overflow" -msgstr "\"real\"型別超過範圍：overflow" - -# utils/adt/float.c:223 -#: utils/adt/float.c:223 -msgid "type \"real\" value out of range: underflow" -msgstr "\"real\"型別超過範圍：underflow" - -# utils/adt/float.c:238 -#: utils/adt/float.c:238 -msgid "type \"double precision\" value out of range: overflow" -msgstr "\"double precision\"型別超過範圍：overflow" - -# utils/adt/float.c:242 -#: utils/adt/float.c:242 -msgid "type \"double precision\" value out of range: underflow" -msgstr "\"double precision\"型別超過範圍：underflow" - -# utils/adt/float.c:280 -#: utils/adt/float.c:280 -msgid "deprecated input syntax for type real: \"\"" -msgstr "" - -# utils/adt/float.c:281 utils/adt/float.c:458 utils/adt/oid.c:46 -#: utils/adt/float.c:281 utils/adt/float.c:458 utils/adt/oid.c:46 -msgid "This input will be rejected in a future release of PostgreSQL." -msgstr "" - -# utils/adt/float.c:320 -#: utils/adt/float.c:320 -#, c-format -msgid "\"%s\" is out of range for type real" -msgstr "\"%s\" 超出 real 型別範圍" - -# utils/adt/float.c:325 utils/adt/float.c:349 -#: utils/adt/float.c:325 utils/adt/float.c:349 -#, c-format -msgid "invalid input syntax for type real: \"%s\"" -msgstr "real型別的輸入語法錯誤：\"%s\"" - -# utils/adt/float.c:457 -#: utils/adt/float.c:457 -msgid "deprecated input syntax for type double precision: \"\"" -msgstr "" - -# utils/adt/float.c:497 -#: utils/adt/float.c:497 -#, c-format -msgid "\"%s\" is out of range for type double precision" -msgstr "\"%s\" 超出 double precision 型別範圍" - -# utils/adt/float.c:502 utils/adt/float.c:526 utils/adt/numeric.c:3298 -# utils/adt/numeric.c:3324 -#: utils/adt/float.c:502 utils/adt/float.c:526 utils/adt/numeric.c:3298 -#: utils/adt/numeric.c:3324 -#, c-format -msgid "invalid input syntax for type double precision: \"%s\"" -msgstr "" - -# utils/adt/float.c:1131 utils/adt/float.c:1197 utils/adt/int.c:614 -# utils/adt/int.c:642 utils/adt/int.c:662 utils/adt/int.c:691 -# utils/adt/int.c:716 utils/adt/int.c:731 utils/adt/int.c:861 -# utils/adt/int.c:881 utils/adt/int.c:907 utils/adt/int.c:941 -# utils/adt/int.c:961 utils/adt/int.c:987 utils/adt/int.c:1012 -# utils/adt/int.c:1091 utils/adt/int8.c:947 utils/adt/numeric.c:1785 -# utils/adt/numeric.c:1794 utils/adt/varbit.c:1234 -#: utils/adt/float.c:1131 utils/adt/float.c:1197 utils/adt/int.c:614 -#: utils/adt/int.c:642 utils/adt/int.c:662 utils/adt/int.c:691 -#: utils/adt/int.c:716 utils/adt/int.c:731 utils/adt/int.c:861 -#: utils/adt/int.c:881 utils/adt/int.c:907 utils/adt/int.c:941 -#: utils/adt/int.c:961 utils/adt/int.c:987 utils/adt/int.c:1012 -#: utils/adt/int.c:1091 utils/adt/int8.c:947 utils/adt/numeric.c:1785 -#: utils/adt/numeric.c:1794 utils/adt/varbit.c:1234 -msgid "integer out of range" -msgstr "整數超過範圍" - -# utils/adt/float.c:1150 utils/adt/float.c:1216 utils/adt/int.c:297 -# utils/adt/int.c:747 utils/adt/int.c:775 utils/adt/int.c:795 -# utils/adt/int.c:815 utils/adt/int.c:841 utils/adt/int.c:1106 -# utils/adt/int8.c:972 utils/adt/numeric.c:1886 utils/adt/numeric.c:1897 -#: utils/adt/float.c:1150 utils/adt/float.c:1216 utils/adt/int.c:297 -#: utils/adt/int.c:747 utils/adt/int.c:775 utils/adt/int.c:795 -#: utils/adt/int.c:815 utils/adt/int.c:841 utils/adt/int.c:1106 -#: utils/adt/int8.c:972 utils/adt/numeric.c:1886 utils/adt/numeric.c:1897 -msgid "smallint out of range" -msgstr "smallint超過範圍" - -# utils/adt/float.c:1452 utils/adt/numeric.c:4220 -#: utils/adt/float.c:1452 utils/adt/numeric.c:4220 -msgid "cannot take square root of a negative number" -msgstr "" - -# utils/adt/float.c:1493 utils/adt/numeric.c:1704 -#: utils/adt/float.c:1493 utils/adt/numeric.c:1704 -msgid "invalid argument for power function" -msgstr "無效的power函式引數" - -# utils/adt/float.c:1508 utils/adt/float.c:1538 -#: utils/adt/float.c:1508 utils/adt/float.c:1538 -msgid "result is out of range" -msgstr "結果超過範圍" - -# utils/adt/float.c:1561 utils/adt/float.c:1591 utils/adt/numeric.c:4439 -#: utils/adt/float.c:1561 utils/adt/float.c:1591 utils/adt/numeric.c:4439 -msgid "cannot take logarithm of zero" -msgstr "" - -# utils/adt/float.c:1565 utils/adt/float.c:1595 utils/adt/numeric.c:4443 -#: utils/adt/float.c:1565 utils/adt/float.c:1595 utils/adt/numeric.c:4443 -msgid "cannot take logarithm of a negative number" -msgstr "" - -# utils/adt/float.c:1622 utils/adt/float.c:1647 utils/adt/float.c:1672 -# utils/adt/float.c:1698 utils/adt/float.c:1723 utils/adt/float.c:1748 -# utils/adt/float.c:1774 utils/adt/float.c:1799 -#: utils/adt/float.c:1622 utils/adt/float.c:1647 utils/adt/float.c:1672 -#: utils/adt/float.c:1698 utils/adt/float.c:1723 utils/adt/float.c:1748 -#: utils/adt/float.c:1774 utils/adt/float.c:1799 -msgid "input is out of range" -msgstr "輸入資料超過範圍" - -# utils/adt/formatting.c:985 -#: utils/adt/formatting.c:986 -msgid "\"9\" must be ahead of \"PR\"" -msgstr "" - -# utils/adt/formatting.c:1004 -#: utils/adt/formatting.c:1005 -msgid "\"0\" must be ahead of \"PR\"" -msgstr "" - -# utils/adt/formatting.c:1033 -#: utils/adt/formatting.c:1034 -msgid "multiple decimal points" -msgstr "多個小數點" - -# utils/adt/formatting.c:1040 utils/adt/formatting.c:1145 -#: utils/adt/formatting.c:1041 utils/adt/formatting.c:1146 -msgid "cannot use \"V\" and decimal point together" -msgstr "" - -# utils/adt/formatting.c:1055 -#: utils/adt/formatting.c:1056 -msgid "not unique \"S\"" -msgstr "" - -# utils/adt/formatting.c:1062 -#: utils/adt/formatting.c:1063 -msgid "cannot use \"S\" and \"PL\"/\"MI\"/\"SG\"/\"PR\" together" -msgstr "無法同時使用 \"S\" 和 \"PL\"/\"MI\"/\"SG\"/\"PR\"" - -# utils/adt/formatting.c:1086 -#: utils/adt/formatting.c:1087 -msgid "cannot use \"S\" and \"MI\" together" -msgstr "無法同時使用 \"S\" 和 \"MI\"" - -# utils/adt/formatting.c:1099 -#: utils/adt/formatting.c:1100 -msgid "cannot use \"S\" and \"PL\" together" -msgstr "無法同時使用 \"S\" 和 \"PL\"" - -# utils/adt/formatting.c:1112 -#: utils/adt/formatting.c:1113 -msgid "cannot use \"S\" and \"SG\" together" -msgstr "無法同時使用 \"S\" 和 \"SG\"" - -# utils/adt/formatting.c:1124 -#: utils/adt/formatting.c:1125 -msgid "cannot use \"PR\" and \"S\"/\"PL\"/\"MI\"/\"SG\" together" -msgstr "無法同時使用 \"PR\" 和 \"S\"/\"PL\"/\"MI\"/\"SG\"" - -# utils/adt/formatting.c:1154 -#: utils/adt/formatting.c:1155 -msgid "\"E\" is not supported" -msgstr "\"E\"未被支援" - -# utils/adt/formatting.c:1425 -#: utils/adt/formatting.c:1426 -#, c-format -msgid "\"%s\" is not a number" -msgstr "\"%s\"不是數字" - -# utils/adt/formatting.c:1688 -#: utils/adt/formatting.c:1689 -msgid "invalid AM/PM string" -msgstr "不合法的AM/PM字串" - -# utils/adt/formatting.c:2034 -#: utils/adt/formatting.c:2035 -msgid "\"TZ\"/\"tz\" not supported" -msgstr "\"TZ\"/\"tz\"不被支援" - -# utils/adt/formatting.c:2044 -#: utils/adt/formatting.c:2045 -#, c-format -msgid "invalid value for %s" -msgstr "%s 的值不合法" - -# utils/adt/formatting.c:3141 -#: utils/adt/formatting.c:3142 -msgid "AM/PM hour must be between 1 and 12" -msgstr "AM/PM 小時必須介於 1 到 12 之間" - -# utils/adt/formatting.c:3215 -#: utils/adt/formatting.c:3216 -msgid "cannot calculate day of year without year information" -msgstr "" - -# utils/adt/formatting.c:3994 -#: utils/adt/formatting.c:4082 -msgid "\"RN\" not supported" -msgstr "\"RN\"不被支援" - -# utils/adt/geo_ops.c:292 utils/adt/geo_ops.c:3953 utils/adt/geo_ops.c:4843 -#: utils/adt/geo_ops.c:292 utils/adt/geo_ops.c:3953 utils/adt/geo_ops.c:4843 -msgid "too many points requested" -msgstr "" - -# utils/adt/geo_ops.c:315 -#: utils/adt/geo_ops.c:315 -msgid "could not format \"path\" value" -msgstr "" - -# utils/adt/geo_ops.c:390 -#: utils/adt/geo_ops.c:390 -#, c-format -msgid "invalid input syntax for type box: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:903 -#: utils/adt/geo_ops.c:903 -#, c-format -msgid "invalid input syntax for type line: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:910 utils/adt/geo_ops.c:977 utils/adt/geo_ops.c:992 -# utils/adt/geo_ops.c:1004 -#: utils/adt/geo_ops.c:910 utils/adt/geo_ops.c:977 utils/adt/geo_ops.c:992 -#: utils/adt/geo_ops.c:1004 -msgid "type \"line\" not yet implemented" -msgstr "\"line\"型別未被實做" - -# utils/adt/geo_ops.c:1352 utils/adt/geo_ops.c:1375 -#: utils/adt/geo_ops.c:1352 utils/adt/geo_ops.c:1375 -#, c-format -msgid "invalid input syntax for type path: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:1412 -#: utils/adt/geo_ops.c:1412 -msgid "invalid number of points in external \"path\" value" -msgstr "" - -# utils/adt/geo_ops.c:1753 -#: utils/adt/geo_ops.c:1753 -#, c-format -msgid "invalid input syntax for type point: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:1981 -#: utils/adt/geo_ops.c:1981 -#, c-format -msgid "invalid input syntax for type lseg: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:2573 -#: utils/adt/geo_ops.c:2573 -msgid "function \"dist_lb\" not implemented" -msgstr "函式\"dist_lb\"未被實做" - -# utils/adt/geo_ops.c:3086 -#: utils/adt/geo_ops.c:3086 -msgid "function \"close_lb\" not implemented" -msgstr "函式\"close_lb\"未被實做" - -# utils/adt/geo_ops.c:3365 -#: utils/adt/geo_ops.c:3365 -msgid "cannot create bounding box for empty polygon" -msgstr "" - -# utils/adt/geo_ops.c:3389 utils/adt/geo_ops.c:3401 -#: utils/adt/geo_ops.c:3389 utils/adt/geo_ops.c:3401 -#, c-format -msgid "invalid input syntax for type polygon: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:3441 -#: utils/adt/geo_ops.c:3441 -msgid "invalid number of points in external \"polygon\" value" -msgstr "" - -# utils/adt/geo_ops.c:3751 -#: utils/adt/geo_ops.c:3751 -msgid "function \"poly_distance\" not implemented" -msgstr "函式\"poly_distance\"未被實做" - -# utils/adt/geo_ops.c:4063 -#: utils/adt/geo_ops.c:4063 -msgid "function \"path_center\" not implemented" -msgstr "函式\"path_center\"未被實做" - -# utils/adt/geo_ops.c:4080 -#: utils/adt/geo_ops.c:4080 -msgid "open path cannot be converted to polygon" -msgstr "" - -# utils/adt/geo_ops.c:4247 utils/adt/geo_ops.c:4257 utils/adt/geo_ops.c:4272 -# utils/adt/geo_ops.c:4278 -#: utils/adt/geo_ops.c:4247 utils/adt/geo_ops.c:4257 utils/adt/geo_ops.c:4272 -#: utils/adt/geo_ops.c:4278 -#, c-format -msgid "invalid input syntax for type circle: \"%s\"" -msgstr "" - -# utils/adt/geo_ops.c:4300 utils/adt/geo_ops.c:4308 -#: utils/adt/geo_ops.c:4300 utils/adt/geo_ops.c:4308 -msgid "could not format \"circle\" value" -msgstr "" - -# utils/adt/geo_ops.c:4335 -#: utils/adt/geo_ops.c:4335 -msgid "invalid radius in external \"circle\" value" -msgstr "" - -# utils/adt/geo_ops.c:4829 -#: utils/adt/geo_ops.c:4829 -msgid "cannot convert circle with radius zero to polygon" -msgstr "" - -# utils/adt/geo_ops.c:4834 -#: utils/adt/geo_ops.c:4834 -msgid "must request at least 2 points" -msgstr "" - -# utils/adt/geo_ops.c:4878 utils/adt/geo_ops.c:4901 -#: utils/adt/geo_ops.c:4878 utils/adt/geo_ops.c:4901 -msgid "cannot convert empty polygon to circle" -msgstr "" - -# utils/adt/int.c:137 -#: utils/adt/int.c:137 -msgid "int2vector has too many elements" -msgstr "" - -# utils/adt/int.c:1294 utils/adt/int8.c:1151 -#: utils/adt/int.c:1294 utils/adt/int8.c:1151 -msgid "step size may not equal zero" -msgstr "" - -# utils/adt/int8.c:101 utils/adt/int8.c:136 utils/adt/numutils.c:74 -# utils/adt/numutils.c:84 utils/adt/numutils.c:97 -#: utils/adt/int8.c:101 utils/adt/int8.c:136 utils/adt/numutils.c:74 -#: utils/adt/numutils.c:84 utils/adt/numutils.c:97 -#, c-format -msgid "invalid input syntax for integer: \"%s\"" -msgstr "無效的 integer 輸入語法: \"%s\"" - -# utils/adt/int8.c:117 -#: utils/adt/int8.c:117 -#, c-format -msgid "value \"%s\" is out of range for type bigint" -msgstr "值\"%s\"超過型別bigint的範圍" - -# utils/adt/int8.c:506 utils/adt/int8.c:534 utils/adt/int8.c:554 -# utils/adt/int8.c:583 utils/adt/int8.c:608 utils/adt/int8.c:626 -# utils/adt/int8.c:660 utils/adt/int8.c:705 utils/adt/int8.c:725 -# utils/adt/int8.c:751 utils/adt/int8.c:776 utils/adt/int8.c:796 -# utils/adt/int8.c:816 utils/adt/int8.c:842 utils/adt/int8.c:1010 -# utils/adt/int8.c:1049 utils/adt/numeric.c:1838 utils/adt/varbit.c:1313 -#: utils/adt/int8.c:506 utils/adt/int8.c:534 utils/adt/int8.c:554 -#: utils/adt/int8.c:583 utils/adt/int8.c:608 utils/adt/int8.c:626 -#: utils/adt/int8.c:660 utils/adt/int8.c:705 utils/adt/int8.c:725 -#: utils/adt/int8.c:751 utils/adt/int8.c:776 utils/adt/int8.c:796 -#: utils/adt/int8.c:816 utils/adt/int8.c:842 utils/adt/int8.c:1010 -#: utils/adt/int8.c:1049 utils/adt/numeric.c:1838 utils/adt/varbit.c:1313 -msgid "bigint out of range" -msgstr "bigint超過範圍" - -# utils/adt/int8.c:1066 -#: utils/adt/int8.c:1066 -msgid "OID out of range" -msgstr "OID 超出範圍" - -# utils/adt/oracle_compat.c:99 utils/adt/oracle_compat.c:138 -#: utils/adt/oracle_compat.c:99 utils/adt/oracle_compat.c:139 -msgid "invalid multibyte character for locale" -msgstr "" - -#: utils/adt/oracle_compat.c:100 -msgid "" -"The server's LC_CTYPE locale is probably incompatible with the database " -"encoding." -msgstr "" - -# utils/adt/oracle_compat.c:410 utils/adt/oracle_compat.c:507 -# utils/adt/oracle_compat.c:1131 -#: utils/adt/oracle_compat.c:411 utils/adt/oracle_compat.c:508 -#: utils/adt/oracle_compat.c:1132 -msgid "requested length too large" -msgstr "" - -# utils/adt/mac.c:65 -#: utils/adt/mac.c:65 -#, c-format -msgid "invalid input syntax for type macaddr: \"%s\"" -msgstr "" - -# utils/adt/mac.c:72 -#: utils/adt/mac.c:72 -#, c-format -msgid "invalid octet value in \"macaddr\" value: \"%s\"" -msgstr "" - -# utils/adt/mac.c:190 -#: utils/adt/mac.c:190 -msgid "text too long to convert to MAC address" -msgstr "" - -# utils/adt/misc.c:81 -#: utils/adt/misc.c:81 -msgid "must be superuser to signal other server processes" -msgstr "只有管理者能傳、信號至其他伺服器行程" - -# utils/adt/misc.c:90 -#: utils/adt/misc.c:90 -#, c-format -msgid "PID %d is not a PostgreSQL server process" -msgstr "PID %d 不是 PostgreSQL 伺服器行程" - -# utils/adt/misc.c:98 -#: utils/adt/misc.c:98 -#, c-format -msgid "could not send signal to process %d: %m" -msgstr "無法傳送信號至行程 %d: %m" - -# utils/adt/misc.c:156 -#: utils/adt/misc.c:156 -msgid "global tablespace never has databases" -msgstr "" - -# utils/adt/misc.c:177 -#: utils/adt/misc.c:177 -#, c-format -msgid "%u is not a tablespace OID" -msgstr "%u不是tablespace的OID" - -# utils/adt/nabstime.c:244 -#: utils/adt/nabstime.c:244 -#, c-format -msgid "invalid time zone name: \"%s\"" -msgstr "" - -# utils/adt/nabstime.c:596 utils/adt/nabstime.c:669 -#: utils/adt/nabstime.c:596 utils/adt/nabstime.c:669 -msgid "cannot convert abstime \"invalid\" to timestamp" -msgstr "" - -# utils/adt/nabstime.c:823 -#: utils/adt/nabstime.c:823 -#, c-format -msgid "invalid input syntax for type tinterval: \"%s\"" -msgstr "無效的 tinterval 型別輸入語法: \"%s\"" - -# utils/adt/nabstime.c:888 -#: utils/adt/nabstime.c:888 -msgid "invalid status in external \"tinterval\" value" -msgstr "" - -# utils/adt/nabstime.c:980 -#: utils/adt/nabstime.c:980 -msgid "cannot convert reltime \"invalid\" to interval" -msgstr "" - -# utils/adt/network.c:105 -#: utils/adt/network.c:105 -#, c-format -msgid "invalid cidr value: \"%s\"" -msgstr "不合法的cidr值：\"%s\"" - -# utils/adt/network.c:106 utils/adt/network.c:233 -#: utils/adt/network.c:106 utils/adt/network.c:233 -msgid "Value has bits set to right of mask." -msgstr "" - -# utils/adt/network.c:153 utils/adt/network.c:528 utils/adt/network.c:554 -# utils/adt/network.c:590 -#: utils/adt/network.c:153 utils/adt/network.c:528 utils/adt/network.c:554 -#: utils/adt/network.c:590 -#, c-format -msgid "could not format inet value: %m" -msgstr "" - -# utils/adt/network.c:198 -#: utils/adt/network.c:198 -msgid "invalid address family in external \"inet\" value" -msgstr "" - -# utils/adt/network.c:203 -#: utils/adt/network.c:203 -msgid "invalid bits in external \"inet\" value" -msgstr "" - -# utils/adt/network.c:209 -#: utils/adt/network.c:209 -msgid "invalid type in external \"inet\" value" -msgstr "" - -# utils/adt/network.c:214 -#: utils/adt/network.c:214 -msgid "invalid length in external \"inet\" value" -msgstr "" - -# utils/adt/network.c:232 -#: utils/adt/network.c:232 -msgid "invalid external \"cidr\" value" -msgstr "" - -# utils/adt/network.c:319 -#: utils/adt/network.c:319 -#, c-format -msgid "invalid mask length: %d" -msgstr "無效的mask長度：%d" - -# utils/adt/not_in.c:64 utils/adt/regproc.c:1110 utils/adt/regproc.c:1115 -# utils/adt/varlena.c:1636 utils/adt/varlena.c:1641 -#: utils/adt/not_in.c:64 utils/adt/regproc.c:1110 utils/adt/regproc.c:1115 -#: utils/adt/varlena.c:1636 utils/adt/varlena.c:1641 -msgid "invalid name syntax" -msgstr "無效的名稱語法" - -# utils/adt/not_in.c:65 -#: utils/adt/not_in.c:65 -msgid "Must provide \"relationname.columnname\"." -msgstr "" - -# utils/adt/numeric.c:397 -#: utils/adt/numeric.c:397 -msgid "invalid length in external \"numeric\" value" -msgstr "" - -# utils/adt/numeric.c:408 -#: utils/adt/numeric.c:408 -msgid "invalid sign in external \"numeric\" value" -msgstr "" - -# utils/adt/numeric.c:418 -#: utils/adt/numeric.c:418 -msgid "invalid digit in external \"numeric\" value" -msgstr "" - -# utils/adt/numeric.c:835 -#: utils/adt/numeric.c:835 -msgid "count must be greater than zero" -msgstr "" - -# utils/adt/numeric.c:848 -#: utils/adt/numeric.c:848 -msgid "lower bound cannot equal upper bound" -msgstr "下界不能等於上界" - -# utils/adt/numeric.c:1761 -#: utils/adt/numeric.c:1761 -msgid "cannot convert NaN to integer" -msgstr "無法將 NaN 轉換成 integer" - -# utils/adt/numeric.c:1829 -#: utils/adt/numeric.c:1829 -msgid "cannot convert NaN to bigint" -msgstr "無法將NaN轉換成bigint" - -# utils/adt/numeric.c:1877 -#: utils/adt/numeric.c:1877 -msgid "cannot convert NaN to smallint" -msgstr "無法將NaN轉換成smallint" - -# utils/adt/numeric.c:2720 utils/adt/numeric.c:2743 utils/adt/numeric.c:2767 -# utils/adt/numeric.c:2774 utils/adt/numeric.c:2788 -#: utils/adt/numeric.c:2720 utils/adt/numeric.c:2743 utils/adt/numeric.c:2767 -#: utils/adt/numeric.c:2774 utils/adt/numeric.c:2788 -#, c-format -msgid "invalid input syntax for type numeric: \"%s\"" -msgstr "" - -# utils/adt/numeric.c:3086 -#: utils/adt/numeric.c:3086 -msgid "value overflows numeric format" -msgstr "" - -# utils/adt/numeric.c:3156 -#: utils/adt/numeric.c:3156 -msgid "numeric field overflow" -msgstr "" - -# utils/adt/numeric.c:3157 -#: utils/adt/numeric.c:3157 -#, c-format -msgid "" -"The absolute value is greater than or equal to 10^%d for field with " -"precision %d, scale %d." -msgstr "" - -# utils/adt/numeric.c:4310 -#: utils/adt/numeric.c:4310 -msgid "argument for function \"exp\" too big" -msgstr "" - -# utils/adt/numeric.c:4692 -#: utils/adt/numeric.c:4692 -msgid "zero raised to zero is undefined" -msgstr "" - -# utils/adt/numutils.c:111 -#: utils/adt/numutils.c:111 -#, c-format -msgid "value \"%s\" is out of range for type integer" -msgstr "" - -# utils/adt/numutils.c:117 -#: utils/adt/numutils.c:117 -#, c-format -msgid "value \"%s\" is out of range for type smallint" -msgstr "值\"%s\"超過型別smallint的範圍" - -# utils/adt/numutils.c:123 -#: utils/adt/numutils.c:123 -#, c-format -msgid "value \"%s\" is out of range for 8-bit integer" -msgstr "" - -# utils/adt/oid.c:45 -#: utils/adt/oid.c:45 -msgid "deprecated input syntax for type oid: \"\"" -msgstr "" - -# utils/adt/oid.c:60 utils/adt/oid.c:66 utils/adt/oid.c:87 -#: utils/adt/oid.c:60 utils/adt/oid.c:66 utils/adt/oid.c:87 -#, c-format -msgid "invalid input syntax for type oid: \"%s\"" -msgstr "無效的 oid 型別輸入語法: \"%s\"" - -# utils/adt/oid.c:72 utils/adt/oid.c:110 -#: utils/adt/oid.c:72 utils/adt/oid.c:110 -#, c-format -msgid "value \"%s\" is out of range for type oid" -msgstr "" - -# utils/adt/oid.c:188 -#: utils/adt/oid.c:188 -msgid "oidvector has too many elements" -msgstr "" - -# utils/adt/ruleutils.c:1719 -#: utils/adt/ruleutils.c:1615 -#, c-format -msgid "rule \"%s\" has unsupported event type %d" -msgstr "" - -# utils/adt/pseudotypes.c:94 -#: utils/adt/pseudotypes.c:94 -msgid "cannot accept a value of type any" -msgstr "" - -# utils/adt/pseudotypes.c:107 -#: utils/adt/pseudotypes.c:107 -msgid "cannot display a value of type any" -msgstr "" - -# utils/adt/pseudotypes.c:121 utils/adt/pseudotypes.c:149 -#: utils/adt/pseudotypes.c:121 utils/adt/pseudotypes.c:149 -msgid "cannot accept a value of type anyarray" -msgstr "" - -# utils/adt/pseudotypes.c:199 -#: utils/adt/pseudotypes.c:199 -msgid "cannot accept a value of type trigger" -msgstr "" - -# utils/adt/pseudotypes.c:212 -#: utils/adt/pseudotypes.c:212 -msgid "cannot display a value of type trigger" -msgstr "" - -# utils/adt/pseudotypes.c:226 -#: utils/adt/pseudotypes.c:226 -msgid "cannot accept a value of type language_handler" -msgstr "" - -# utils/adt/pseudotypes.c:239 -#: utils/adt/pseudotypes.c:239 -msgid "cannot display a value of type language_handler" -msgstr "" - -# utils/adt/pseudotypes.c:253 -#: utils/adt/pseudotypes.c:253 -msgid "cannot accept a value of type internal" -msgstr "" - -# utils/adt/pseudotypes.c:266 -#: utils/adt/pseudotypes.c:266 -msgid "cannot display a value of type internal" -msgstr "" - -# utils/adt/pseudotypes.c:280 -#: utils/adt/pseudotypes.c:280 -msgid "cannot accept a value of type opaque" -msgstr "" - -# utils/adt/pseudotypes.c:293 -#: utils/adt/pseudotypes.c:293 -msgid "cannot display a value of type opaque" -msgstr "" - -# utils/adt/pseudotypes.c:307 -#: utils/adt/pseudotypes.c:307 -msgid "cannot accept a value of type anyelement" -msgstr "" - -# utils/adt/pseudotypes.c:320 -#: utils/adt/pseudotypes.c:320 -msgid "cannot display a value of type anyelement" -msgstr "" - -# utils/adt/regexp.c:178 -#: utils/adt/regexp.c:155 utils/adt/regexp.c:241 -#, c-format -msgid "regular expression failed: %s" -msgstr "正規表示式不正確：%s" - -# utils/adt/regexp.c:178 -#: utils/adt/regexp.c:187 -#, c-format -msgid "invalid regular expression: %s" -msgstr "不合法的正規表示式：%s" - -# utils/adt/regproc.c:122 utils/adt/regproc.c:142 -#: utils/adt/regproc.c:122 utils/adt/regproc.c:142 -#, c-format -msgid "more than one function named \"%s\"" -msgstr "有一個以上的函式被命名為\"%s\"" - -# utils/adt/regproc.c:471 utils/adt/regproc.c:491 -#: utils/adt/regproc.c:471 utils/adt/regproc.c:491 -#, c-format -msgid "more than one operator named %s" -msgstr "有一個以上的operator被命名為 %s" - -# utils/adt/regproc.c:644 utils/adt/regproc.c:1276 -#: utils/adt/regproc.c:644 utils/adt/regproc.c:1276 -msgid "too many arguments" -msgstr "參數過多" - -# utils/adt/regproc.c:645 -#: utils/adt/regproc.c:645 -msgid "Provide two argument types for operator." -msgstr "" - -# utils/adt/regproc.c:1174 -#: utils/adt/regproc.c:1174 -msgid "expected a left parenthesis" -msgstr "預期應有左圓括號" - -# utils/adt/regproc.c:1190 -#: utils/adt/regproc.c:1190 -msgid "expected a right parenthesis" -msgstr "預期應有右圓括號" - -# utils/adt/regproc.c:1209 -#: utils/adt/regproc.c:1209 -msgid "expected a type name" -msgstr "預期應有型別名稱" - -# utils/adt/regproc.c:1241 -#: utils/adt/regproc.c:1241 -msgid "improper type name" -msgstr "不合適的型別名稱" - -# utils/adt/ri_triggers.c:337 utils/adt/ri_triggers.c:2743 -# utils/adt/ri_triggers.c:3248 utils/adt/ri_triggers.c:3285 -#: utils/adt/ri_triggers.c:338 utils/adt/ri_triggers.c:2744 -#: utils/adt/ri_triggers.c:3249 utils/adt/ri_triggers.c:3286 -#, c-format -msgid "insert or update on table \"%s\" violates foreign key constraint \"%s\"" -msgstr "" - -# utils/adt/ri_triggers.c:340 utils/adt/ri_triggers.c:2746 -#: utils/adt/ri_triggers.c:341 utils/adt/ri_triggers.c:2747 -msgid "MATCH FULL does not allow mixing of null and nonnull key values." -msgstr "" - -# utils/adt/ri_triggers.c:2482 utils/adt/ri_triggers.c:2971 -#: utils/adt/ri_triggers.c:2483 utils/adt/ri_triggers.c:2972 -#, c-format -msgid "function \"%s\" called with wrong number of trigger arguments" -msgstr "" - -# utils/adt/ri_triggers.c:2500 utils/adt/ri_triggers.c:2981 -#: utils/adt/ri_triggers.c:2501 utils/adt/ri_triggers.c:2982 -#, c-format -msgid "no target table given for trigger \"%s\" on table \"%s\"" -msgstr "" - -# utils/adt/ri_triggers.c:2503 utils/adt/ri_triggers.c:2984 -#: utils/adt/ri_triggers.c:2504 utils/adt/ri_triggers.c:2985 -msgid "" -"Remove this referential integrity trigger and its mates, then do ALTER TABLE " -"ADD CONSTRAINT." -msgstr "" - -# utils/adt/ri_triggers.c:2891 utils/adt/ri_triggers.c:2901 -# utils/adt/ri_triggers.c:3347 -#: utils/adt/ri_triggers.c:2892 utils/adt/ri_triggers.c:2902 -#: utils/adt/ri_triggers.c:3348 -#, c-format -msgid "" -"table \"%s\" does not have column \"%s\" referenced by constraint \"%s\"" -msgstr "" - -# utils/adt/ri_triggers.c:2921 -#: utils/adt/ri_triggers.c:2922 -#, c-format -msgid "function \"%s\" was not called by trigger manager" -msgstr "" - -# utils/adt/ri_triggers.c:2930 -#: utils/adt/ri_triggers.c:2931 -#, c-format -msgid "function \"%s\" must be fired AFTER ROW" -msgstr "" - -# utils/adt/ri_triggers.c:2938 -#: utils/adt/ri_triggers.c:2939 -#, c-format -msgid "function \"%s\" must be fired for INSERT" -msgstr "" - -# utils/adt/ri_triggers.c:2944 -#: utils/adt/ri_triggers.c:2945 -#, c-format -msgid "function \"%s\" must be fired for UPDATE" -msgstr "" - -# utils/adt/ri_triggers.c:2951 -#: utils/adt/ri_triggers.c:2952 -#, c-format -msgid "function \"%s\" must be fired for INSERT or UPDATE" -msgstr "" - -# utils/adt/ri_triggers.c:2958 -#: utils/adt/ri_triggers.c:2959 -#, c-format -msgid "function \"%s\" must be fired for DELETE" -msgstr "" - -# utils/adt/ri_triggers.c:3215 -#: utils/adt/ri_triggers.c:3216 -#, c-format -msgid "" -"referential integrity query on \"%s\" from constraint \"%s\" on \"%s\" gave " -"unexpected result" -msgstr "" - -# utils/adt/ri_triggers.c:3219 -#: utils/adt/ri_triggers.c:3220 -msgid "This is most likely due to a rule having rewritten the query." -msgstr "" - -# utils/adt/ri_triggers.c:3250 -#: utils/adt/ri_triggers.c:3251 -#, c-format -msgid "No rows were found in \"%s\"." -msgstr "" - -# utils/adt/ri_triggers.c:3287 -#: utils/adt/ri_triggers.c:3288 -#, c-format -msgid "Key (%s)=(%s) is not present in table \"%s\"." -msgstr "" - -# utils/adt/ri_triggers.c:3293 -#: utils/adt/ri_triggers.c:3294 -#, c-format -msgid "" -"update or delete on \"%s\" violates foreign key constraint \"%s\" on \"%s\"" -msgstr "" - -# utils/adt/ri_triggers.c:3296 -#: utils/adt/ri_triggers.c:3297 -#, c-format -msgid "Key (%s)=(%s) is still referenced from table \"%s\"." -msgstr "" - -# utils/adt/rowtypes.c:78 utils/adt/rowtypes.c:442 -#: utils/adt/rowtypes.c:78 utils/adt/rowtypes.c:442 -msgid "input of anonymous composite types is not implemented" -msgstr "" - -# utils/adt/rowtypes.c:125 utils/adt/rowtypes.c:152 utils/adt/rowtypes.c:176 -# utils/adt/rowtypes.c:184 utils/adt/rowtypes.c:234 utils/adt/rowtypes.c:242 -#: utils/adt/rowtypes.c:125 utils/adt/rowtypes.c:152 utils/adt/rowtypes.c:176 -#: utils/adt/rowtypes.c:184 utils/adt/rowtypes.c:234 utils/adt/rowtypes.c:242 -#, c-format -msgid "malformed record literal: \"%s\"" -msgstr "" - -# utils/adt/rowtypes.c:126 -#: utils/adt/rowtypes.c:126 -msgid "Missing left parenthesis." -msgstr "缺少左圓括號。" - -# utils/adt/rowtypes.c:153 -#: utils/adt/rowtypes.c:153 -msgid "Too few columns." -msgstr "欄位不足。" - -# utils/adt/rowtypes.c:178 utils/adt/rowtypes.c:186 -#: utils/adt/rowtypes.c:178 utils/adt/rowtypes.c:186 -msgid "Unexpected end of input." -msgstr "非預期的輸入終止。" - -# utils/adt/rowtypes.c:235 -#: utils/adt/rowtypes.c:235 -msgid "Too many columns." -msgstr "欄位過多。" - -# utils/adt/rowtypes.c:243 -#: utils/adt/rowtypes.c:243 -msgid "Junk after right parenthesis." -msgstr "" - -# utils/adt/rowtypes.c:491 -#: utils/adt/rowtypes.c:491 -#, c-format -msgid "wrong number of columns: %d, expected %d" -msgstr "" - -# utils/adt/rowtypes.c:515 -#: utils/adt/rowtypes.c:515 -#, c-format -msgid "wrong data type: %u, expected %u" -msgstr "錯誤的資料型別: %u, 預期應為 %u" - -# utils/adt/rowtypes.c:574 -#: utils/adt/rowtypes.c:574 -#, c-format -msgid "improper binary format in record column %d" -msgstr "" - -# utils/adt/timestamp.c:98 utils/adt/timestamp.c:339 -#: utils/adt/timestamp.c:98 utils/adt/timestamp.c:339 -#, c-format -msgid "timestamp out of range: \"%s\"" -msgstr "timestamp 超過範圍: \"%s\"" - -# utils/adt/timestamp.c:116 utils/adt/timestamp.c:357 -# utils/adt/timestamp.c:536 -#: utils/adt/timestamp.c:116 utils/adt/timestamp.c:357 -#: utils/adt/timestamp.c:536 -#, c-format -msgid "date/time value \"%s\" is no longer supported" -msgstr "date/time 的值 \"%s\" 已不再受支援" - -# utils/adt/timestamp.c:271 -#: utils/adt/timestamp.c:271 -#, c-format -msgid "timestamp(%d) precision must be between %d and %d" -msgstr "timestamp(%d) 精確度必須介於 %d 和 %d 之間" - -# utils/adt/timestamp.c:529 utils/adt/timestamp.c:2408 -# utils/adt/timestamp.c:2519 utils/adt/timestamp.c:3041 -#: utils/adt/timestamp.c:529 utils/adt/timestamp.c:2408 -#: utils/adt/timestamp.c:2519 utils/adt/timestamp.c:3054 -msgid "interval out of range" -msgstr "interval超過範圍" - -# utils/adt/timestamp.c:882 -#: utils/adt/timestamp.c:882 -#, c-format -msgid "interval(%d) precision must be between %d and %d" -msgstr "interval(%d) 精確度必須介於 %d 和 %d 之間" - -# utils/adt/timestamp.c:1882 -#: utils/adt/timestamp.c:1882 -msgid "cannot subtract infinite timestamps" -msgstr "" - -# utils/adt/timestamp.c:2579 -#: utils/adt/timestamp.c:2579 -#, c-format -msgid "invalid input syntax for type timestamp: \"%s\"" -msgstr "無效的 timestamp 型別輸入語法: \"%s\"" - -# utils/adt/timestamp.c:2639 -#: utils/adt/timestamp.c:2639 -#, c-format -msgid "invalid input syntax for type timestamp with time zone: \"%s\"" -msgstr "無效的 timestamp 型別帶時區輸入語法: \"%s\"" - -# utils/adt/timestamp.c:2700 -#: utils/adt/timestamp.c:2700 -#, c-format -msgid "invalid input syntax for type interval: \"%s\"" -msgstr "無效的 interval 型別輸入語法: \"%s\"" - -# utils/adt/timestamp.c:2811 utils/adt/timestamp.c:3344 -# utils/adt/timestamp.c:3401 -#: utils/adt/timestamp.c:2811 utils/adt/timestamp.c:3357 -#: utils/adt/timestamp.c:3414 -#, c-format -msgid "timestamp units \"%s\" not supported" -msgstr "" - -# utils/adt/timestamp.c:2825 utils/adt/timestamp.c:3411 -#: utils/adt/timestamp.c:2825 utils/adt/timestamp.c:3424 -#, c-format -msgid "timestamp units \"%s\" not recognized" -msgstr "" - -# utils/adt/timestamp.c:2939 utils/adt/timestamp.c:3565 -# utils/adt/timestamp.c:3603 -#: utils/adt/timestamp.c:2951 utils/adt/timestamp.c:3582 -#: utils/adt/timestamp.c:3620 -#, c-format -msgid "timestamp with time zone units \"%s\" not supported" -msgstr "" - -# utils/adt/timestamp.c:2955 utils/adt/timestamp.c:3612 -#: utils/adt/timestamp.c:2968 utils/adt/timestamp.c:3629 -#, c-format -msgid "timestamp with time zone units \"%s\" not recognized" -msgstr "" - -# utils/adt/timestamp.c:3034 utils/adt/timestamp.c:3718 -#: utils/adt/timestamp.c:3047 utils/adt/timestamp.c:3735 -#, c-format -msgid "interval units \"%s\" not supported" -msgstr "" - -# utils/adt/timestamp.c:3050 utils/adt/timestamp.c:3748 -#: utils/adt/timestamp.c:3063 utils/adt/timestamp.c:3765 -#, c-format -msgid "interval units \"%s\" not recognized" -msgstr "" - -# utils/adt/timestamp.c:3074 -#: utils/adt/timestamp.c:3087 -msgid "cannot calculate week number without year information" -msgstr "" - -# utils/adt/timestamp.c:3819 utils/adt/timestamp.c:3968 -#: utils/adt/timestamp.c:3836 utils/adt/timestamp.c:3985 -#, c-format -msgid "interval time zone \"%s\" must not specify month" -msgstr "" - -# utils/adt/selfuncs.c:3409 utils/adt/selfuncs.c:3796 -#: utils/adt/selfuncs.c:3370 utils/adt/selfuncs.c:3757 -msgid "case insensitive matching not supported on type bytea" -msgstr "bytea 型別不支援不區分大小寫的匹配" - -# utils/adt/selfuncs.c:3514 utils/adt/selfuncs.c:3957 -#: utils/adt/selfuncs.c:3475 utils/adt/selfuncs.c:3918 -msgid "regular-expression matching not supported on type bytea" -msgstr "bytea 型別不支援正規表示式匹配" - -# utils/adt/tid.c:66 utils/adt/tid.c:74 utils/adt/tid.c:82 -#: utils/adt/tid.c:66 utils/adt/tid.c:74 utils/adt/tid.c:82 -#, c-format -msgid "invalid input syntax for type tid: \"%s\"" -msgstr "無效的 tid 型別輸入語法: \"%s\"" - -# utils/adt/varbit.c:109 utils/adt/varbit.c:263 -#: utils/adt/varbit.c:109 utils/adt/varbit.c:263 -#, c-format -msgid "bit string length %d does not match type bit(%d)" -msgstr "" - -# utils/adt/varbit.c:131 utils/adt/varbit.c:370 -#: utils/adt/varbit.c:131 utils/adt/varbit.c:370 -#, c-format -msgid "\"%c\" is not a valid binary digit" -msgstr "" - -# utils/adt/varbit.c:156 utils/adt/varbit.c:395 -#: utils/adt/varbit.c:156 utils/adt/varbit.c:395 -#, c-format -msgid "\"%c\" is not a valid hexadecimal digit" -msgstr "" - -# utils/adt/varbit.c:348 utils/adt/varbit.c:532 -#: utils/adt/varbit.c:348 utils/adt/varbit.c:532 -#, c-format -msgid "bit string too long for type bit varying(%d)" -msgstr "" - -# utils/adt/varbit.c:472 -#: utils/adt/varbit.c:472 -msgid "invalid length in external bit string" -msgstr "" - -# utils/adt/varbit.c:905 -#: utils/adt/varbit.c:905 -msgid "cannot AND bit strings of different sizes" -msgstr "" - -# utils/adt/varbit.c:946 -#: utils/adt/varbit.c:946 -msgid "cannot OR bit strings of different sizes" -msgstr "" - -# utils/adt/varbit.c:992 -#: utils/adt/varbit.c:992 -msgid "cannot XOR bit strings of different sizes" -msgstr "" - -# utils/adt/varchar.c:105 utils/adt/varchar.c:225 -#: utils/adt/varchar.c:105 utils/adt/varchar.c:225 -#, c-format -msgid "value too long for type character(%d)" -msgstr "" - -# utils/adt/varchar.c:383 utils/adt/varchar.c:475 -#: utils/adt/varchar.c:383 utils/adt/varchar.c:475 -#, c-format -msgid "value too long for type character varying(%d)" -msgstr "" - -# utils/adt/varlena.c:582 utils/adt/varlena.c:646 utils/adt/varlena.c:1312 -#: utils/adt/varlena.c:582 utils/adt/varlena.c:646 utils/adt/varlena.c:1312 -msgid "negative substring length not allowed" -msgstr "" - -# utils/adt/varlena.c:1407 utils/adt/varlena.c:1438 utils/adt/varlena.c:1474 -# utils/adt/varlena.c:1517 -#: utils/adt/varlena.c:1407 utils/adt/varlena.c:1438 utils/adt/varlena.c:1474 -#: utils/adt/varlena.c:1517 -#, c-format -msgid "index %d out of valid range, 0..%d" -msgstr "索引 %d 超出有效範圍，0..%d" - -# utils/adt/varlena.c:1529 -#: utils/adt/varlena.c:1529 -msgid "new bit must be 0 or 1" -msgstr "新位元必須是 0 或 1" - -# utils/adt/varlena.c:2016 -#: utils/adt/varlena.c:2016 -msgid "field position must be greater than zero" -msgstr "" - -# utils/cache/lsyscache.c:1679 utils/cache/lsyscache.c:1715 -# utils/cache/lsyscache.c:1751 utils/cache/lsyscache.c:1787 -#: utils/cache/lsyscache.c:1687 utils/cache/lsyscache.c:1723 -#: utils/cache/lsyscache.c:1759 utils/cache/lsyscache.c:1795 -#, c-format -msgid "type %s is only a shell" -msgstr "" - -# utils/cache/lsyscache.c:1684 -#: utils/cache/lsyscache.c:1692 -#, c-format -msgid "no input function available for type %s" -msgstr "" - -# utils/cache/lsyscache.c:1720 -#: utils/cache/lsyscache.c:1728 -#, c-format -msgid "no output function available for type %s" -msgstr "" - -# utils/cache/relcache.c:3264 -#: utils/cache/relcache.c:3293 -#, c-format -msgid "could not create relation-cache initialization file \"%s\": %m" -msgstr "" - -# utils/cache/relcache.c:3266 -#: utils/cache/relcache.c:3295 -msgid "Continuing anyway, but there's something wrong." -msgstr "" - -# utils/cache/typcache.c:414 -#: utils/cache/typcache.c:414 -#, c-format -msgid "type %s is not composite" -msgstr "" - -# utils/cache/typcache.c:428 -#: utils/cache/typcache.c:428 -msgid "record type has not been registered" -msgstr "" - -# utils/error/assert.c:34 -#: utils/error/assert.c:34 -msgid "TRAP: ExceptionalCondition: bad arguments\n" -msgstr "" - -# utils/error/assert.c:37 -#: utils/error/assert.c:37 -#, c-format -msgid "TRAP: %s(\"%s\", File: \"%s\", Line: %d)\n" -msgstr "" - -# utils/error/elog.c:1128 -#: utils/error/elog.c:1128 -#, c-format -msgid "could not reopen file \"%s\" as stderr: %m" -msgstr "" - -# utils/error/elog.c:1141 -#: utils/error/elog.c:1141 -#, c-format -msgid "could not reopen file \"%s\" as stdout: %m" -msgstr "" - -# utils/error/elog.c:1350 utils/error/elog.c:1360 -#: utils/error/elog.c:1350 utils/error/elog.c:1360 -msgid "[unknown]" -msgstr "" - -# utils/error/elog.c:1488 utils/error/elog.c:1681 utils/error/elog.c:1757 -#: utils/error/elog.c:1488 utils/error/elog.c:1681 utils/error/elog.c:1757 -msgid "missing error text" -msgstr "" - -# utils/error/elog.c:1491 utils/error/elog.c:1494 utils/error/elog.c:1760 -# utils/error/elog.c:1763 -#: utils/error/elog.c:1491 utils/error/elog.c:1494 utils/error/elog.c:1760 -#: utils/error/elog.c:1763 -#, c-format -msgid " at character %d" -msgstr "於字元%d" - -# utils/error/elog.c:1504 -#: utils/error/elog.c:1504 -msgid "DETAIL: " -msgstr "詳細：" - -# utils/error/elog.c:1511 -#: utils/error/elog.c:1511 -msgid "HINT: " -msgstr "提示：" - -# utils/error/elog.c:1518 -#: utils/error/elog.c:1518 -msgid "QUERY: " -msgstr "查詢：" - -# utils/error/elog.c:1525 -#: utils/error/elog.c:1525 -msgid "CONTEXT: " -msgstr "" - -# utils/error/elog.c:1535 -#: utils/error/elog.c:1535 -#, c-format -msgid "LOCATION: %s, %s:%d\n" -msgstr "" - -# utils/error/elog.c:1542 -#: utils/error/elog.c:1542 -#, c-format -msgid "LOCATION: %s:%d\n" -msgstr "" - -# utils/error/elog.c:1555 -#: utils/error/elog.c:1555 -msgid "STATEMENT: " -msgstr "" - -# utils/error/elog.c:1873 -#: utils/error/elog.c:1873 -#, c-format -msgid "operating system error %d" -msgstr "作業系統錯誤 %d" - -# utils/error/elog.c:1896 -#: utils/error/elog.c:1896 -msgid "DEBUG" -msgstr "除錯" - -# utils/error/elog.c:1900 -#: utils/error/elog.c:1900 -msgid "LOG" -msgstr "" - -# utils/error/elog.c:1903 -#: utils/error/elog.c:1903 -msgid "INFO" -msgstr "" - -# utils/error/elog.c:1906 -#: utils/error/elog.c:1906 -msgid "NOTICE" -msgstr "注意" - -# utils/error/elog.c:1909 -#: utils/error/elog.c:1909 -msgid "WARNING" -msgstr "" - -# utils/error/elog.c:1912 -#: utils/error/elog.c:1912 -msgid "ERROR" -msgstr "錯誤" - -# utils/error/elog.c:1915 -#: utils/error/elog.c:1915 -msgid "FATAL" -msgstr "嚴重錯誤" - -# utils/error/elog.c:1918 -#: utils/error/elog.c:1918 -msgid "PANIC" -msgstr "" - -# utils/fmgr/fmgr.c:247 -#: utils/fmgr/fmgr.c:247 -#, c-format -msgid "internal function \"%s\" is not in internal lookup table" -msgstr "" - -# utils/fmgr/fmgr.c:449 -#: utils/fmgr/fmgr.c:449 -#, c-format -msgid "unrecognized API version %d reported by info function \"%s\"" -msgstr "" - -# utils/fmgr/fmgr.c:764 utils/fmgr/fmgr.c:1639 -#: utils/fmgr/fmgr.c:760 utils/fmgr/fmgr.c:1635 -#, c-format -msgid "function %u has too many arguments (%d, maximum is %d)" -msgstr "" - -# utils/fmgr/dfmgr.c:107 utils/fmgr/dfmgr.c:209 utils/fmgr/dfmgr.c:263 -#: utils/fmgr/dfmgr.c:107 utils/fmgr/dfmgr.c:209 utils/fmgr/dfmgr.c:263 -#, c-format -msgid "could not access file \"%s\": %m" -msgstr "無法存取檔案\"%s\"：%m" - -# utils/fmgr/dfmgr.c:145 -#: utils/fmgr/dfmgr.c:145 -#, c-format -msgid "could not load library \"%s\": %s" -msgstr "無法載入程式庫\"%s\"：%s" - -# utils/fmgr/dfmgr.c:175 -#: utils/fmgr/dfmgr.c:175 -#, c-format -msgid "could not find function \"%s\" in file \"%s\"" -msgstr "找不到函式\"%s\"於檔案\"%s\"" - -# utils/fmgr/dfmgr.c:354 -#: utils/fmgr/dfmgr.c:354 -#, c-format -msgid "invalid macro name in dynamic library path: %s" -msgstr "" - -# utils/fmgr/dfmgr.c:398 -#: utils/fmgr/dfmgr.c:398 -msgid "zero-length component in parameter \"dynamic_library_path\"" -msgstr "" - -# utils/fmgr/dfmgr.c:418 -#: utils/fmgr/dfmgr.c:418 -msgid "component in parameter \"dynamic_library_path\" is not an absolute path" -msgstr "" - -# utils/init/postinit.c:119 -#: utils/init/postinit.c:119 -#, c-format -msgid "database \"%s\", OID %u, has disappeared from pg_database" -msgstr "" - -# utils/init/postinit.c:130 -#: utils/init/postinit.c:130 -#, c-format -msgid "database \"%s\" is not currently accepting connections" -msgstr "資料庫 \"%s\" 目前並不接受連線。" - -# utils/init/postinit.c:278 -#: utils/init/postinit.c:285 -#, c-format -msgid "The database subdirectory \"%s\" is missing." -msgstr "遺失資料庫子目錄 \"%s\"。" - -# utils/init/postinit.c:283 -#: utils/init/postinit.c:290 -#, c-format -msgid "could not access directory \"%s\": %m" -msgstr "無法存取目錄 \"%s\": %m" - -# utils/init/postinit.c:292 -#: utils/init/postinit.c:299 -#, c-format -msgid "could not change directory to \"%s\": %m" -msgstr "無法切換目錄到 \"%s\": %m" - -# utils/init/postinit.c:375 -#: utils/init/postinit.c:382 -msgid "no users are defined in this database system" -msgstr "沒有任何使用者被定義在這個資料庫系統" - -# utils/init/postinit.c:376 -#: utils/init/postinit.c:383 -#, c-format -msgid "" -"You should immediately run CREATE USER \"%s\" WITH SYSID %d CREATEUSER;." -msgstr "您必須立刻執行 CREATE USER \"%s\" WITH SYSID %d CREATEUSER;。" - -# utils/init/postinit.c:412 -#: utils/init/postinit.c:423 -msgid "connection limit exceeded for non-superusers" -msgstr "非特權使用者連線數已達限制量" - -# utils/init/miscinit.c:403 -#: utils/init/miscinit.c:403 -msgid "permission denied to set session authorization" -msgstr "" - -# utils/init/miscinit.c:429 -#: utils/init/miscinit.c:429 -#, c-format -msgid "invalid user ID: %d" -msgstr "不合法的使用者ID：%d" - -# utils/init/miscinit.c:519 -#: utils/init/miscinit.c:519 -#, c-format -msgid "could not create lock file \"%s\": %m" -msgstr "無法建立鎖定檔\"%s\"：%m" - -# utils/init/miscinit.c:533 -#: utils/init/miscinit.c:533 -#, c-format -msgid "could not open lock file \"%s\": %m" -msgstr "無法開啟鎖定檔 \"%s\": %m" - -# utils/init/miscinit.c:539 -#: utils/init/miscinit.c:539 -#, c-format -msgid "could not read lock file \"%s\": %m" -msgstr "無法讀取鎖定檔\"%s\"：%m" - -# utils/init/miscinit.c:589 -#: utils/init/miscinit.c:589 -#, c-format -msgid "lock file \"%s\" already exists" -msgstr "鎖定檔 \"%s\" 已存在" - -# utils/init/miscinit.c:593 -#: utils/init/miscinit.c:593 -#, c-format -msgid "Is another postgres (PID %d) running in data directory \"%s\"?" -msgstr "" - -# utils/init/miscinit.c:595 -#: utils/init/miscinit.c:595 -#, c-format -msgid "Is another postmaster (PID %d) running in data directory \"%s\"?" -msgstr "" - -# utils/init/miscinit.c:598 -#: utils/init/miscinit.c:598 -#, c-format -msgid "Is another postgres (PID %d) using socket file \"%s\"?" -msgstr "" - -# utils/init/miscinit.c:600 -#: utils/init/miscinit.c:600 -#, c-format -msgid "Is another postmaster (PID %d) using socket file \"%s\"?" -msgstr "是否有另一個postmaster(PID %d)在使用socket檔\"%s\"？" - -# utils/init/miscinit.c:628 -#: utils/init/miscinit.c:628 -#, c-format -msgid "pre-existing shared memory block (key %lu, ID %lu) is still in use" -msgstr "既存的共享記憶體區塊 (key %lu, ID %lu) 仍在使用中。" - -# utils/init/miscinit.c:631 -#: utils/init/miscinit.c:631 -#, c-format -msgid "" -"If you're sure there are no old server processes still running, remove the " -"shared memory block with the command \"ipcrm\", or just delete the file \"%s" -"\"." -msgstr "如果您確定沒有舊伺服器的行程仍在運行，以 \"ipcrm\" 命令移除共享記憶體區塊，或直接刪除 \"%s\" 檔案。" - -# utils/init/miscinit.c:648 -#: utils/init/miscinit.c:648 -#, c-format -msgid "could not remove old lock file \"%s\": %m" -msgstr "無法移除舊的鎖定檔 \"%s\": %m" - -# utils/init/miscinit.c:650 -#: utils/init/miscinit.c:650 -msgid "" -"The file seems accidentally left over, but it could not be removed. Please " -"remove the file by hand and try again." -msgstr "檔案似乎意外地殘，但它無法被移除适請手動移除該檔案並重試适" - -# utils/init/miscinit.c:672 utils/init/miscinit.c:682 -#: utils/init/miscinit.c:672 utils/init/miscinit.c:682 -#, c-format -msgid "could not write lock file \"%s\": %m" -msgstr "無法寫入鎖定檔\"%s\"：%m" - -# utils/init/miscinit.c:792 utils/misc/guc.c:5074 -#: utils/init/miscinit.c:792 utils/misc/guc.c:4938 -#, c-format -msgid "could not read from file \"%s\": %m" -msgstr "無法讀取鎖定檔\"%s\"：%m" - -# utils/init/miscinit.c:883 utils/init/miscinit.c:896 -#: utils/init/miscinit.c:883 utils/init/miscinit.c:896 -#, c-format -msgid "\"%s\" is not a valid data directory" -msgstr "\"%s\" 不是有效的資料目錄" - -# utils/init/miscinit.c:885 -#: utils/init/miscinit.c:885 -#, c-format -msgid "File \"%s\" is missing." -msgstr "遺失檔案 \"%s\"。" - -# utils/init/miscinit.c:898 -#: utils/init/miscinit.c:898 -#, c-format -msgid "File \"%s\" does not contain valid data." -msgstr "檔案 \"%s\" 不含有效資料。" - -# utils/init/miscinit.c:900 -#: utils/init/miscinit.c:900 -msgid "You may need to initdb." -msgstr "您可能必須 initdb。" - -# utils/init/miscinit.c:908 -#: utils/init/miscinit.c:908 -#, c-format -msgid "" -"The data directory was initialized by PostgreSQL version %ld.%ld, which is " -"not compatible with this version %s." -msgstr "資料目錄是由 PostgreSQL 版本 %ld.%ld 初始化，並不相容於目前的版本 %s。" - -# utils/init/miscinit.c:950 -#: utils/init/miscinit.c:950 -msgid "invalid list syntax for parameter \"preload_libraries\"" -msgstr "" - -# utils/init/miscinit.c:996 -#: utils/init/miscinit.c:996 -#, c-format -msgid "preloaded library \"%s\" with initialization function \"%s\"" -msgstr "" - -# utils/init/miscinit.c:1000 -#: utils/init/miscinit.c:1000 -#, c-format -msgid "preloaded library \"%s\"" -msgstr "預先載入程式庫\"%s\"" - -# utils/mb/conv.c:376 -#: utils/mb/conv.c:376 -#, c-format -msgid "ignoring unconvertible UTF-8 character 0x%04x" -msgstr "忽略無法轉換的UTF-8字元0x%04x" - -# utils/mb/conv.c:406 -#: utils/mb/conv.c:406 -#, c-format -msgid "invalid encoding number: %d" -msgstr "無效的編碼編號：%d" - -# utils/mb/conv.c:445 -#: utils/mb/conv.c:445 -#, c-format -msgid "ignoring unconvertible %s character 0x%04x" -msgstr "忽略無法轉換的 %s 字元 0x%04x" - -# utils/mb/encnames.c:445 -#: utils/mb/encnames.c:445 -msgid "encoding name too long" -msgstr "編碼名稱過長" - -# utils/mb/mbutils.c:252 -#: utils/mb/mbutils.c:252 -#, c-format -msgid "" -"default conversion function for encoding \"%s\" to \"%s\" does not exist" -msgstr "" - -# utils/mb/mbutils.c:326 -#: utils/mb/mbutils.c:326 -#, c-format -msgid "invalid source encoding name \"%s\"" -msgstr "" - -# utils/mb/mbutils.c:331 -#: utils/mb/mbutils.c:331 -#, c-format -msgid "invalid destination encoding name \"%s\"" -msgstr "" - -# utils/mb/wchar.c:832 -#: utils/mb/wchar.c:832 -msgid "Unicode characters greater than or equal to 0x10000 are not supported" -msgstr "" - -# utils/mb/wchar.c:861 -#: utils/mb/wchar.c:861 -#, c-format -msgid "invalid byte sequence for encoding \"%s\": 0x%s" -msgstr "" - -# utils/misc/help_config.c:125 -#: utils/misc/help_config.c:125 -msgid "internal error: unrecognized run-time parameter type\n" -msgstr "" - -# utils/misc/guc.c:237 -#: utils/misc/guc.c:234 -msgid "Ungrouped" -msgstr "" - -# utils/misc/guc.c:239 -#: utils/misc/guc.c:236 -msgid "File Locations" -msgstr "" - -# utils/misc/guc.c:241 -#: utils/misc/guc.c:238 -msgid "Connections and Authentication" -msgstr "" - -# utils/misc/guc.c:243 -#: utils/misc/guc.c:240 -msgid "Connections and Authentication / Connection Settings" -msgstr "" - -# utils/misc/guc.c:245 -#: utils/misc/guc.c:242 -msgid "Connections and Authentication / Security and Authentication" -msgstr "" - -# utils/misc/guc.c:247 -#: utils/misc/guc.c:244 -msgid "Resource Usage" -msgstr "" - -# utils/misc/guc.c:249 -#: utils/misc/guc.c:246 -msgid "Resource Usage / Memory" -msgstr "" - -# utils/misc/guc.c:251 -#: utils/misc/guc.c:248 -msgid "Resource Usage / Free Space Map" -msgstr "" - -# utils/misc/guc.c:253 -#: utils/misc/guc.c:250 -msgid "Resource Usage / Kernel Resources" -msgstr "" - -# utils/misc/guc.c:255 -#: utils/misc/guc.c:252 -msgid "Write-Ahead Log" -msgstr "" - -# utils/misc/guc.c:257 -#: utils/misc/guc.c:254 -msgid "Write-Ahead Log / Settings" -msgstr "" - -# utils/misc/guc.c:259 -#: utils/misc/guc.c:256 -msgid "Write-Ahead Log / Checkpoints" -msgstr "" - -# utils/misc/guc.c:261 -#: utils/misc/guc.c:258 -msgid "Query Tuning" -msgstr "" - -# utils/misc/guc.c:263 -#: utils/misc/guc.c:260 -msgid "Query Tuning / Planner Method Configuration" -msgstr "" - -# utils/misc/guc.c:265 -#: utils/misc/guc.c:262 -msgid "Query Tuning / Planner Cost Constants" -msgstr "" - -# utils/misc/guc.c:267 -#: utils/misc/guc.c:264 -msgid "Query Tuning / Genetic Query Optimizer" -msgstr "" - -# utils/misc/guc.c:269 -#: utils/misc/guc.c:266 -msgid "Query Tuning / Other Planner Options" -msgstr "" - -# utils/misc/guc.c:271 -#: utils/misc/guc.c:268 -msgid "Reporting and Logging" -msgstr "" - -# utils/misc/guc.c:273 -#: utils/misc/guc.c:270 -msgid "Reporting and Logging / Where to Log" -msgstr "" - -# utils/misc/guc.c:275 -#: utils/misc/guc.c:272 -msgid "Reporting and Logging / When to Log" -msgstr "" - -# utils/misc/guc.c:277 -#: utils/misc/guc.c:274 -msgid "Reporting and Logging / What to Log" -msgstr "" - -# utils/misc/guc.c:279 -#: utils/misc/guc.c:276 -msgid "Statistics" -msgstr "" - -# utils/misc/guc.c:281 -#: utils/misc/guc.c:278 -msgid "Statistics / Monitoring" -msgstr "" - -# utils/misc/guc.c:283 -#: utils/misc/guc.c:280 -msgid "Statistics / Query and Index Statistics Collector" -msgstr "" - -# utils/misc/guc.c:285 -#: utils/misc/guc.c:282 -msgid "Client Connection Defaults" -msgstr "" - -# utils/misc/guc.c:287 -#: utils/misc/guc.c:284 -msgid "Client Connection Defaults / Statement Behavior" -msgstr "" - -# utils/misc/guc.c:289 -#: utils/misc/guc.c:286 -msgid "Client Connection Defaults / Locale and Formatting" -msgstr "" - -# utils/misc/guc.c:291 -#: utils/misc/guc.c:288 -msgid "Client Connection Defaults / Other Defaults" -msgstr "" - -# utils/misc/guc.c:293 -#: utils/misc/guc.c:290 -msgid "Lock Management" -msgstr "" - -# utils/misc/guc.c:295 -#: utils/misc/guc.c:292 -msgid "Version and Platform Compatibility" -msgstr "" - -# utils/misc/guc.c:297 -#: utils/misc/guc.c:294 -msgid "Version and Platform Compatibility / Previous PostgreSQL Versions" -msgstr "" - -# utils/misc/guc.c:299 -#: utils/misc/guc.c:296 -msgid "Version and Platform Compatibility / Other Platforms and Clients" -msgstr "" - -# utils/misc/guc.c:301 -#: utils/misc/guc.c:298 -msgid "Preset Options" -msgstr "" - -# utils/misc/guc.c:303 -#: utils/misc/guc.c:300 -msgid "Customized Options" -msgstr "" - -# utils/misc/guc.c:305 -#: utils/misc/guc.c:302 -msgid "Developer Options" -msgstr "開發人員選項" - -# utils/misc/guc.c:360 -#: utils/misc/guc.c:357 -msgid "Enables the planner's use of sequential-scan plans." -msgstr "" - -# utils/misc/guc.c:368 -#: utils/misc/guc.c:365 -msgid "Enables the planner's use of index-scan plans." -msgstr "" - -# utils/misc/guc.c:376 -#: utils/misc/guc.c:373 -msgid "Enables the planner's use of TID scan plans." -msgstr "" - -# utils/misc/guc.c:384 -#: utils/misc/guc.c:381 -msgid "Enables the planner's use of explicit sort steps." -msgstr "" - -# utils/misc/guc.c:392 -#: utils/misc/guc.c:389 -msgid "Enables the planner's use of hashed aggregation plans." -msgstr "" - -# utils/misc/guc.c:400 -#: utils/misc/guc.c:397 -msgid "Enables the planner's use of nested-loop join plans." -msgstr "" - -# utils/misc/guc.c:408 -#: utils/misc/guc.c:405 -msgid "Enables the planner's use of merge join plans." -msgstr "" - -# utils/misc/guc.c:416 -#: utils/misc/guc.c:413 -msgid "Enables the planner's use of hash join plans." -msgstr "" - -# utils/misc/guc.c:424 -#: utils/misc/guc.c:421 -msgid "Enables genetic query optimization." -msgstr "" - -# utils/misc/guc.c:425 -#: utils/misc/guc.c:422 -msgid "This algorithm attempts to do planning without exhaustive searching." -msgstr "" - -# utils/misc/guc.c:434 -#: utils/misc/guc.c:431 -msgid "Shows whether the current user is a superuser." -msgstr "顯示目前的使用者是否為管理者。" - -# utils/misc/guc.c:443 -#: utils/misc/guc.c:440 -msgid "Enables SSL connections." -msgstr "啟用SSL連線。" - -# utils/misc/guc.c:451 -#: utils/misc/guc.c:448 -msgid "Forces synchronization of updates to disk." -msgstr "" - -# utils/misc/guc.c:452 -#: utils/misc/guc.c:449 -msgid "" -"The server will use the fsync() system call in several places to make sure " -"that updates are physically written to disk. This insures that a database " -"cluster will recover to a consistent state after an operating system or " -"hardware crash." -msgstr "" - -# utils/misc/guc.c:462 -#: utils/misc/guc.c:459 -msgid "Continues processing past damaged page headers." -msgstr "" - -# utils/misc/guc.c:463 -#: utils/misc/guc.c:460 -msgid "" -"Detection of a damaged page header normally causes PostgreSQL to report an " -"error, aborting the current transaction. Setting zero_damaged_pages to true " -"causes the system to instead report a warning, zero out the damaged page, " -"and continue processing. This behavior will destroy data, namely all the " -"rows on the damaged page." -msgstr "" - -# utils/misc/guc.c:475 -#: utils/misc/guc.c:472 -msgid "Runs the server silently." -msgstr "靜默地運行伺服器。" - -# utils/misc/guc.c:476 -#: utils/misc/guc.c:473 -msgid "" -"If this parameter is set, the server will automatically run in the " -"background and any controlling terminals are dissociated." -msgstr "如果這個參數被設置，伺服器將自動在背景運行並和任何控制的終端機分離。" - -# utils/misc/guc.c:484 -#: utils/misc/guc.c:481 -msgid "Logs each successful connection." -msgstr "記錄每個成功的連線皂" - -# utils/misc/guc.c:492 -#: utils/misc/guc.c:489 -msgid "Logs end of a session, including duration." -msgstr "" - -# utils/misc/guc.c:502 -#: utils/misc/guc.c:499 -msgid "Turns on various assertion checks." -msgstr "" - -# utils/misc/guc.c:503 -#: utils/misc/guc.c:500 -msgid "This is a debugging aid." -msgstr "" - -# utils/misc/guc.c:514 utils/misc/guc.c:596 utils/misc/guc.c:669 -# utils/misc/guc.c:678 utils/misc/guc.c:687 utils/misc/guc.c:696 -# utils/misc/guc.c:1081 utils/misc/guc.c:1090 utils/misc/guc.c:1150 -#: utils/misc/guc.c:511 utils/misc/guc.c:593 utils/misc/guc.c:666 -#: utils/misc/guc.c:675 utils/misc/guc.c:684 utils/misc/guc.c:693 -#: utils/misc/guc.c:1078 utils/misc/guc.c:1087 utils/misc/guc.c:1145 -msgid "no description available" -msgstr "沒有敘述可用" - -#: utils/misc/guc.c:520 -msgid "Logs the duration of each completed SQL statement." -msgstr "" - -# utils/misc/guc.c:531 -#: utils/misc/guc.c:528 -msgid "Prints the parse tree to the server log." -msgstr "將剖析樹寫入伺服記log。" - -# utils/misc/guc.c:539 -#: utils/misc/guc.c:536 -msgid "Prints the parse tree after rewriting to server log." -msgstr "" - -# utils/misc/guc.c:547 -#: utils/misc/guc.c:544 -msgid "Prints the execution plan to server log." -msgstr "將執行計畫寫入伺服器log。" - -# utils/misc/guc.c:555 -#: utils/misc/guc.c:552 -msgid "Indents parse and plan tree displays." -msgstr "" - -# utils/misc/guc.c:563 -#: utils/misc/guc.c:560 -msgid "Writes parser performance statistics to the server log." -msgstr "" - -# utils/misc/guc.c:571 -#: utils/misc/guc.c:568 -msgid "Writes planner performance statistics to the server log." -msgstr "" - -# utils/misc/guc.c:579 -#: utils/misc/guc.c:576 -msgid "Writes executor performance statistics to the server log." -msgstr "" - -# utils/misc/guc.c:587 -#: utils/misc/guc.c:584 -msgid "Writes cumulative performance statistics to the server log." -msgstr "" - -# utils/misc/guc.c:607 -#: utils/misc/guc.c:604 -msgid "Uses the indented output format for EXPLAIN VERBOSE." -msgstr "" - -# utils/misc/guc.c:615 -#: utils/misc/guc.c:612 -msgid "Starts the server statistics-collection subprocess." -msgstr "啟動伺服器統計資料收集子行程。" - -# utils/misc/guc.c:623 -#: utils/misc/guc.c:620 -msgid "Zeroes collected statistics on server restart." -msgstr "" - -# utils/misc/guc.c:631 -#: utils/misc/guc.c:628 -msgid "Collects statistics about executing commands." -msgstr "" - -# utils/misc/guc.c:632 -#: utils/misc/guc.c:629 -msgid "" -"Enables the collection of statistics on the currently executing command of " -"each session, along with the time at which that command began execution." -msgstr "" - -# utils/misc/guc.c:641 -#: utils/misc/guc.c:638 -msgid "Collects row-level statistics on database activity." -msgstr "" - -# utils/misc/guc.c:649 -#: utils/misc/guc.c:646 -msgid "Collects block-level statistics on database activity." -msgstr "" - -# utils/misc/guc.c:658 -#: utils/misc/guc.c:655 -msgid "Generates debugging output for LISTEN and NOTIFY." -msgstr "" - -# utils/misc/guc.c:707 -#: utils/misc/guc.c:704 -msgid "Logs the host name in the connection logs." -msgstr "在連線記錄裡記錄主機名稱。" - -# utils/misc/guc.c:708 -#: utils/misc/guc.c:705 -msgid "" -"By default, connection logs only show the IP address of the connecting host. " -"If you want them to show the host name you can turn this on, but depending " -"on your host name resolution setup it might impose a non-negligible " -"performance penalty." -msgstr "" - -# utils/misc/guc.c:718 -#: utils/misc/guc.c:715 -msgid "Causes subtables to be included by default in various commands." -msgstr "" - -# utils/misc/guc.c:726 -#: utils/misc/guc.c:723 -msgid "Interprets ACST, CST, EST, and SAT as Australian time zones." -msgstr "" - -# utils/misc/guc.c:727 -#: utils/misc/guc.c:724 -msgid "" -"Otherwise they are interpreted as North/South American time zones and " -"Saturday." -msgstr "" - -# utils/misc/guc.c:735 -#: utils/misc/guc.c:732 -msgid "Encrypt passwords." -msgstr "加密密碼。" - -# utils/misc/guc.c:736 -#: utils/misc/guc.c:733 -msgid "" -"When a password is specified in CREATE USER or ALTER USER without writing " -"either ENCRYPTED or UNENCRYPTED, this parameter determines whether the " -"password is to be encrypted." -msgstr "" - -# utils/misc/guc.c:745 -#: utils/misc/guc.c:742 -msgid "Treats \"expr=NULL\" as \"expr IS NULL\"." -msgstr "將\"expr=NULL\"視為\"expr IS NULL\"。" - -# utils/misc/guc.c:746 -#: utils/misc/guc.c:743 -msgid "" -"When turned on, expressions of the form expr = NULL (or NULL = expr) are " -"treated as expr IS NULL, that is, they return true if expr evaluates to the " -"null value, and false otherwise. The correct behavior of expr = NULL is to " -"always return null (unknown)." -msgstr "" - -# utils/misc/guc.c:757 -#: utils/misc/guc.c:754 -msgid "Enables per-database user names." -msgstr "" - -# utils/misc/guc.c:766 -#: utils/misc/guc.c:763 -msgid "This parameter doesn't do anything." -msgstr "這個參數不做任何事。" - -# utils/misc/guc.c:767 -#: utils/misc/guc.c:764 -msgid "" -"It's just here so that we won't choke on SET AUTOCOMMIT TO ON from 7.3-" -"vintage clients." -msgstr "" - -# utils/misc/guc.c:775 -#: utils/misc/guc.c:772 -msgid "Sets the default read-only status of new transactions." -msgstr "" - -# utils/misc/guc.c:783 -#: utils/misc/guc.c:780 -msgid "Sets the current transaction's read-only status." -msgstr "" - -# utils/misc/guc.c:792 -#: utils/misc/guc.c:789 -msgid "Automatically adds missing table references to FROM clauses." -msgstr "" - -# utils/misc/guc.c:800 -#: utils/misc/guc.c:797 -msgid "Check function bodies during CREATE FUNCTION." -msgstr "" - -# utils/misc/guc.c:808 -#: utils/misc/guc.c:805 -msgid "By default, newly-created tables should have OIDs." -msgstr "新建立的資料表預設會有OID。" - -# utils/misc/guc.c:816 -#: utils/misc/guc.c:813 -msgid "Start a subprocess to capture stderr output into log files." -msgstr "" - -# utils/misc/guc.c:824 -#: utils/misc/guc.c:821 -msgid "Truncate existing log files of same name during log rotation." -msgstr "" - -# utils/misc/guc.c:834 -#: utils/misc/guc.c:831 -msgid "Emit WAL-related debugging output." -msgstr "" - -# utils/misc/guc.c:845 -#: utils/misc/guc.c:842 -msgid "Datetimes are integer based" -msgstr "" - -# utils/misc/guc.c:868 -#: utils/misc/guc.c:865 -msgid "Sets the default statistics target." -msgstr "" - -# utils/misc/guc.c:869 -#: utils/misc/guc.c:866 -msgid "" -"This applies to table columns that have not had a column-specific target set " -"via ALTER TABLE SET STATISTICS." -msgstr "" - -# utils/misc/guc.c:877 -#: utils/misc/guc.c:874 -msgid "Sets the FROM-list size beyond which subqueries are not collapsed." -msgstr "" - -# utils/misc/guc.c:879 -#: utils/misc/guc.c:876 -msgid "" -"The planner will merge subqueries into upper queries if the resulting FROM " -"list would have no more than this many items." -msgstr "" - -# utils/misc/guc.c:888 -#: utils/misc/guc.c:885 -msgid "Sets the FROM-list size beyond which JOIN constructs are not flattened." -msgstr "" - -# utils/misc/guc.c:890 -#: utils/misc/guc.c:887 -msgid "" -"The planner will flatten explicit inner JOIN constructs into lists of FROM " -"items whenever a list of no more than this many items would result." -msgstr "" - -# utils/misc/guc.c:899 -#: utils/misc/guc.c:896 -msgid "Sets the threshold of FROM items beyond which GEQO is used." -msgstr "" - -# utils/misc/guc.c:907 -#: utils/misc/guc.c:904 -msgid "GEQO: effort is used to set the default for other GEQO parameters." -msgstr "" - -# utils/misc/guc.c:915 -#: utils/misc/guc.c:912 -msgid "GEQO: number of individuals in the population." -msgstr "" - -# utils/misc/guc.c:916 utils/misc/guc.c:924 -#: utils/misc/guc.c:913 utils/misc/guc.c:921 -msgid "Zero selects a suitable default value." -msgstr "" - -# utils/misc/guc.c:923 -#: utils/misc/guc.c:920 -msgid "GEQO: number of iterations of the algorithm." -msgstr "" - -# utils/misc/guc.c:932 -#: utils/misc/guc.c:929 -msgid "The time in milliseconds to wait on lock before checking for deadlock." -msgstr "" - -# utils/misc/guc.c:948 -#: utils/misc/guc.c:945 -msgid "Sets the maximum number of concurrent connections." -msgstr "設定最大同時連線數。" - -# utils/misc/guc.c:957 -#: utils/misc/guc.c:954 -msgid "Sets the number of connection slots reserved for superusers." -msgstr "設定保留給管理者的連線數。" - -# utils/misc/guc.c:966 -#: utils/misc/guc.c:963 -msgid "Sets the number of shared memory buffers used by the server." -msgstr "設定供伺服器使用的共享記憶體緩衝區數。" - -# utils/misc/guc.c:975 -#: utils/misc/guc.c:972 -msgid "Sets the TCP port the server listens on." -msgstr "設定伺服器傾聽的TCP連接埠。" - -# utils/misc/guc.c:984 -#: utils/misc/guc.c:981 -msgid "Sets the access permissions of the Unix-domain socket." -msgstr "設定Unix-domain socket的存取權限。" - -# utils/misc/guc.c:985 -#: utils/misc/guc.c:982 -msgid "" -"Unix-domain sockets use the usual Unix file system permission set. The " -"parameter value is expected to be an numeric mode specification in the form " -"accepted by the chmod and umask system calls. (To use the customary octal " -"format the number must start with a 0 (zero).)" -msgstr "" - -# utils/misc/guc.c:997 -#: utils/misc/guc.c:994 -msgid "Sets the maximum memory to be used for query workspaces." -msgstr "" - -# utils/misc/guc.c:998 -#: utils/misc/guc.c:995 -msgid "" -"This much memory may be used by each internal sort operation and hash table " -"before switching to temporary disk files." -msgstr "" - -# utils/misc/guc.c:1008 -#: utils/misc/guc.c:1005 -msgid "Sets the maximum memory to be used for maintenance operations." -msgstr "設定給維護性操作使用的最大記憶體量。" - -# utils/misc/guc.c:1009 -#: utils/misc/guc.c:1006 -msgid "This includes operations such as VACUUM and CREATE INDEX." -msgstr "這包括像 VACUUM 和 CREATE INDEX 的操作。" - -# utils/misc/guc.c:1017 -#: utils/misc/guc.c:1014 -msgid "Sets the maximum stack depth, in kilobytes." -msgstr "設定最大堆疊深度，以 kilobytes 為單位。" - -# utils/misc/guc.c:1026 -#: utils/misc/guc.c:1023 -msgid "Vacuum cost for a page found in the buffer cache." -msgstr "" - -# utils/misc/guc.c:1035 -#: utils/misc/guc.c:1032 -msgid "Vacuum cost for a page not found in the buffer cache." -msgstr "" - -# utils/misc/guc.c:1044 -#: utils/misc/guc.c:1041 -msgid "Vacuum cost for a page dirtied by vacuum." -msgstr "" - -# utils/misc/guc.c:1053 -#: utils/misc/guc.c:1050 -msgid "Vacuum cost amount available before napping." -msgstr "" - -# utils/misc/guc.c:1062 -#: utils/misc/guc.c:1059 -msgid "Vacuum cost delay in milliseconds." -msgstr "" - -# utils/misc/guc.c:1071 -#: utils/misc/guc.c:1068 -msgid "" -"Sets the maximum number of simultaneously open files for each server process." -msgstr "為每個伺服器行程設定可同時開啟的最大檔案數。" - -# utils/misc/guc.c:1101 -#: utils/misc/guc.c:1098 -msgid "Sets the maximum allowed duration (in milliseconds) of any statement." -msgstr "" - -# utils/misc/guc.c:1102 -#: utils/misc/guc.c:1099 -msgid "A value of 0 turns off the timeout." -msgstr "0 值關閉逾時機制。" - -# utils/misc/guc.c:1110 -#: utils/misc/guc.c:1107 -msgid "" -"Sets the maximum number of tables and indexes for which free space is " -"tracked." -msgstr "" - -# utils/misc/guc.c:1119 -#: utils/misc/guc.c:1115 -msgid "Sets the maximum number of disk pages for which free space is tracked." -msgstr "" - -# utils/misc/guc.c:1129 -#: utils/misc/guc.c:1124 -msgid "Sets the maximum number of locks per transaction." -msgstr "" - -# utils/misc/guc.c:1130 -#: utils/misc/guc.c:1125 -msgid "" -"The shared lock table is sized on the assumption that at most " -"max_locks_per_transaction * max_connections distinct objects will need to be " -"locked at any one time." -msgstr "" - -# utils/misc/guc.c:1140 -#: utils/misc/guc.c:1135 -msgid "Sets the maximum time in seconds to complete client authentication." -msgstr "" - -# utils/misc/guc.c:1160 -#: utils/misc/guc.c:1155 -msgid "" -"Sets the maximum distance in log segments between automatic WAL checkpoints." -msgstr "" - -# utils/misc/guc.c:1169 -#: utils/misc/guc.c:1164 -msgid "Sets the maximum time in seconds between automatic WAL checkpoints." -msgstr "" - -# utils/misc/guc.c:1178 -#: utils/misc/guc.c:1173 -msgid "" -"Logs if filling of checkpoint segments happens more frequently than this (in " -"seconds)." -msgstr "" - -# utils/misc/guc.c:1180 -#: utils/misc/guc.c:1175 -msgid "" -"Write a message to the server log if checkpoints caused by the filling of " -"checkpoint segment files happens more frequently than this number of " -"seconds. Zero turns off the warning." -msgstr "" - -# utils/misc/guc.c:1190 -#: utils/misc/guc.c:1185 -msgid "Sets the number of disk-page buffers in shared memory for WAL." -msgstr "" - -# utils/misc/guc.c:1199 -#: utils/misc/guc.c:1194 -msgid "" -"Sets the delay in microseconds between transaction commit and flushing WAL " -"to disk." -msgstr "" - -# utils/misc/guc.c:1209 -#: utils/misc/guc.c:1204 -msgid "" -"Sets the minimum concurrent open transactions before performing commit_delay." -msgstr "" - -# utils/misc/guc.c:1219 -#: utils/misc/guc.c:1214 -msgid "Sets the number of digits displayed for floating-point values." -msgstr "" - -# utils/misc/guc.c:1220 -#: utils/misc/guc.c:1215 -msgid "" -"This affects real, double precision, and geometric data types. The parameter " -"value is added to the standard number of digits (FLT_DIG or DBL_DIG as " -"appropriate)." -msgstr "" - -# utils/misc/guc.c:1230 -#: utils/misc/guc.c:1225 -msgid "" -"Sets the minimum execution time in milliseconds above which statements will " -"be logged." -msgstr "" - -# utils/misc/guc.c:1232 -#: utils/misc/guc.c:1227 -msgid "Zero prints all queries. The default is -1 (turning this feature off)." -msgstr "" - -# utils/misc/guc.c:1240 -#: utils/misc/guc.c:1235 -msgid "Interval to report shared buffer status in seconds" -msgstr "" - -# utils/misc/guc.c:1249 -#: utils/misc/guc.c:1244 -msgid "Background writer sleep time between rounds in milliseconds" -msgstr "" - -# utils/misc/guc.c:1258 -#: utils/misc/guc.c:1253 -msgid "Background writer percentage of dirty buffers to flush per round" -msgstr "" - -# utils/misc/guc.c:1267 -#: utils/misc/guc.c:1262 -msgid "Background writer maximum number of pages to flush per round" -msgstr "" - -# utils/misc/guc.c:1276 -#: utils/misc/guc.c:1271 -msgid "Automatic log file rotation will occur after N minutes" -msgstr "" - -# utils/misc/guc.c:1285 -#: utils/misc/guc.c:1280 -msgid "Automatic log file rotation will occur after N kilobytes" -msgstr "" - -# utils/misc/guc.c:1294 -#: utils/misc/guc.c:1289 -msgid "Shows the maximum number of function arguments." -msgstr "顯示最大函式引數數量。" - -# utils/misc/guc.c:1304 -#: utils/misc/guc.c:1299 -msgid "Shows the maximum number of index keys." -msgstr "顯示最大索引數。" - -# utils/misc/guc.c:1314 -#: utils/misc/guc.c:1309 -msgid "Shows the maximum identifier length" -msgstr "顯示識別字最大長度" - -# utils/misc/guc.c:1324 -#: utils/misc/guc.c:1319 -msgid "Shows size of a disk block" -msgstr "顯示磁碟區塊大小" - -# utils/misc/guc.c:1343 -#: utils/misc/guc.c:1338 -msgid "Sets the planner's assumption about size of the disk cache." -msgstr "" - -# utils/misc/guc.c:1344 -#: utils/misc/guc.c:1339 -msgid "" -"That is, the portion of the kernel's disk cache that will be used for " -"PostgreSQL data files. This is measured in disk pages, which are normally 8 " -"kB each." -msgstr "" - -# utils/misc/guc.c:1353 -#: utils/misc/guc.c:1348 -msgid "" -"Sets the planner's estimate of the cost of a nonsequentially fetched disk " -"page." -msgstr "" - -# utils/misc/guc.c:1355 -#: utils/misc/guc.c:1350 -msgid "" -"This is measured as a multiple of the cost of a sequential page fetch. A " -"higher value makes it more likely a sequential scan will be used, a lower " -"value makes it more likely an index scan will be used." -msgstr "" - -# utils/misc/guc.c:1365 -#: utils/misc/guc.c:1360 -msgid "Sets the planner's estimate of the cost of processing each tuple (row)." -msgstr "" - -# utils/misc/guc.c:1366 utils/misc/guc.c:1376 utils/misc/guc.c:1385 -#: utils/misc/guc.c:1361 utils/misc/guc.c:1371 utils/misc/guc.c:1380 -msgid "This is measured as a fraction of the cost of a sequential page fetch." -msgstr "" - -# utils/misc/guc.c:1374 -#: utils/misc/guc.c:1369 -msgid "" -"Sets the planner's estimate of processing cost for each index tuple (row) " -"during index scan." -msgstr "" - -# utils/misc/guc.c:1384 -#: utils/misc/guc.c:1379 -msgid "" -"Sets the planner's estimate of processing cost of each operator in WHERE." -msgstr "" - -# utils/misc/guc.c:1394 -#: utils/misc/guc.c:1389 -msgid "GEQO: selective pressure within the population." -msgstr "" - -# utils/misc/guc.c:1404 -#: utils/misc/guc.c:1399 -msgid "Sets the seed for random-number generation." -msgstr "" - -# utils/misc/guc.c:1423 -#: utils/misc/guc.c:1418 -msgid "WAL archiving command." -msgstr "WAL備份命令。" - -# utils/misc/guc.c:1424 -#: utils/misc/guc.c:1419 -msgid "The shell command that will be called to archive a WAL file." -msgstr "" - -# utils/misc/guc.c:1432 -#: utils/misc/guc.c:1427 -msgid "Sets the client's character set encoding." -msgstr "設定用戶端使用的字元集編碼。" - -# utils/misc/guc.c:1442 -#: utils/misc/guc.c:1437 -msgid "Sets the message levels that are sent to the client." -msgstr "設定送給用戶端的訊息等級。" - -# utils/misc/guc.c:1443 -#: utils/misc/guc.c:1438 -msgid "" -"Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, LOG, NOTICE, " -"WARNING, and ERROR. Each level includes all the levels that follow it. The " -"later the level, the fewer messages are sent." -msgstr "有效值為 DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, LOG, NOTICE, WARNING, 和 ERROR。每個等級都包含位於它之後的所有等級。越後面的等級送出越少的訊息。" - -# utils/misc/guc.c:1454 -#: utils/misc/guc.c:1449 -msgid "Sets the message levels that are logged." -msgstr "設定記茄的訊息等級。" - -# utils/misc/guc.c:1455 -#: utils/misc/guc.c:1450 -msgid "" -"Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, INFO, NOTICE, " -"WARNING, ERROR, LOG, FATAL, and PANIC. Each level includes all the levels " -"that follow it." -msgstr "有效值為 DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, INFO, NOTICE, WARNING, ERROR, LOG, FATAL, 和 PANIC。每個等級都包含位於它之後的所有等級。" - -# utils/misc/guc.c:1465 -#: utils/misc/guc.c:1460 -msgid "Sets the verbosity of logged messages." -msgstr "設定記錄訊息的詳細程度。" - -# utils/misc/guc.c:1466 -#: utils/misc/guc.c:1461 -msgid "Valid values are \"terse\", \"default\", and \"verbose\"." -msgstr "有效值為 \"terse\", \"default\", 和 \"verbose\"。" - -# utils/misc/guc.c:1473 -#: utils/misc/guc.c:1468 -msgid "Sets the type of statements logged." -msgstr "設定要記錄的敘述類型。" - -# utils/misc/guc.c:1474 -#: utils/misc/guc.c:1469 -msgid "Valid values are \"none\", \"ddl\", \"mod\", and \"all\"." -msgstr "合法的值有\"none\"、\"ddl\"、\"mod\"和\"all\"。" - -# utils/misc/guc.c:1482 -#: utils/misc/guc.c:1477 -msgid "" -"Causes all statements generating error at or above this level to be logged." -msgstr "" - -# utils/misc/guc.c:1483 -#: utils/misc/guc.c:1478 -msgid "" -"All SQL statements that cause an error of the specified level or a higher " -"level are logged." -msgstr "所有發生比指定等級更高錯誤的SQL敘述都會被記錄。" - -# utils/misc/guc.c:1492 -#: utils/misc/guc.c:1487 -msgid "Controls information prefixed to each log line" -msgstr "" - -# utils/misc/guc.c:1493 -#: utils/misc/guc.c:1488 -msgid "if blank no prefix is used" -msgstr "" - -# utils/misc/guc.c:1502 -#: utils/misc/guc.c:1497 -msgid "Sets the display format for date and time values." -msgstr "設定日期和時間的顯示格式。" - -# utils/misc/guc.c:1503 -#: utils/misc/guc.c:1498 -msgid "Also controls interpretation of ambiguous date inputs." -msgstr "" - -#: utils/misc/guc.c:1508 -msgid "Sets the default tablespace to create tables and indexes in." -msgstr "" - -#: utils/misc/guc.c:1509 -msgid "An empty string selects the database's default tablespace." -msgstr "" - -# utils/misc/guc.c:1513 -#: utils/misc/guc.c:1517 -msgid "Sets the transaction isolation level of each new transaction." -msgstr "設定每個交易的交易隔離等級。" - -# utils/misc/guc.c:1514 -#: utils/misc/guc.c:1518 -msgid "" -"Each SQL transaction has an isolation level, which can be either \"read " -"uncommitted\", \"read committed\", \"repeatable read\", or \"serializable\"." -msgstr "每個SQL交易都有隔離等級，可以是\"read uncommitted\"、\"read committed\"、\"repeatable read\"或\"serializable\"。" - -# utils/misc/guc.c:1523 -#: utils/misc/guc.c:1527 -msgid "Sets the path for dynamically loadable modules." -msgstr "設定可動態載入模組的路徑。" - -# utils/misc/guc.c:1524 -#: utils/misc/guc.c:1528 -msgid "" -"If a dynamically loadable module needs to be opened and the specified name " -"does not have a directory component (i.e., the name does not contain a " -"slash), the system will search this path for the specified file." -msgstr "" - -# utils/misc/guc.c:1535 -#: utils/misc/guc.c:1540 -msgid "Sets the location of the Kerberos server key file." -msgstr "設定Kerberos伺服器金鑰所在位置。" - -# utils/misc/guc.c:1544 -#: utils/misc/guc.c:1550 -msgid "Sets the Rendezvous broadcast service name." -msgstr "設定Rendezvous廣播服務名稱。" - -# utils/misc/guc.c:1555 -#: utils/misc/guc.c:1561 -msgid "Shows the collation order locale." -msgstr "" - -# utils/misc/guc.c:1565 -#: utils/misc/guc.c:1571 -msgid "Shows the character classification and case conversion locale." -msgstr "" - -# utils/misc/guc.c:1575 -#: utils/misc/guc.c:1581 -msgid "Sets the language in which messages are displayed." -msgstr "設定顯示訊息時使用的語言" - -# utils/misc/guc.c:1584 -#: utils/misc/guc.c:1590 -msgid "Sets the locale for formatting monetary amounts." -msgstr "" - -# utils/misc/guc.c:1593 -#: utils/misc/guc.c:1599 -msgid "Sets the locale for formatting numbers." -msgstr "設定格式化數字時使用的locale。" - -# utils/misc/guc.c:1602 -#: utils/misc/guc.c:1608 -msgid "Sets the locale for formatting date and time values." -msgstr "設定格式化日期和時間時使用的locale。" - -# utils/misc/guc.c:1611 -#: utils/misc/guc.c:1617 -msgid "Lists shared libraries to preload into server." -msgstr "列出預先載入伺服器的共享程式庫。" - -# utils/misc/guc.c:1621 -#: utils/misc/guc.c:1627 -msgid "Sets the regular expression \"flavor\"." -msgstr "" - -# utils/misc/guc.c:1622 -#: utils/misc/guc.c:1628 -msgid "This can be set to advanced, extended, or basic." -msgstr "可以設定成advanced、extended或basic。" - -# utils/misc/guc.c:1630 -#: utils/misc/guc.c:1636 -msgid "Sets the schema search order for names that are not schema-qualified." -msgstr "" - -# utils/misc/guc.c:1641 -#: utils/misc/guc.c:1647 -msgid "Sets the server (database) character set encoding." -msgstr "設定伺服器(資料庫)使用的字元編碼。" - -# utils/misc/guc.c:1652 -#: utils/misc/guc.c:1658 -msgid "Shows the server version." -msgstr "顯示伺服器版本。" - -# utils/misc/guc.c:1663 -#: utils/misc/guc.c:1669 -msgid "Sets the session user name." -msgstr "設定 session 使用者名稱。" - -# utils/misc/guc.c:1673 -#: utils/misc/guc.c:1679 -msgid "Sets the destination for server log output." -msgstr "設定伺服器記錄輸出目的地。" - -# utils/misc/guc.c:1674 -#: utils/misc/guc.c:1680 -msgid "" -"Valid values are combinations of \"stderr\", \"syslog\", and \"eventlog\", " -"depending on the platform." -msgstr "" - -# utils/misc/guc.c:1683 -#: utils/misc/guc.c:1689 -msgid "Sets the destination directory for log files." -msgstr "設定伺服器記錄輸出目錄。" - -# utils/misc/guc.c:1684 -#: utils/misc/guc.c:1690 -msgid "May be specified as relative to the data directory or as absolute path." -msgstr "" - -# utils/misc/guc.c:1692 -#: utils/misc/guc.c:1699 -msgid "Sets the file name pattern for log files." -msgstr "設定log檔的檔名格式。" - -# utils/misc/guc.c:1702 -#: utils/misc/guc.c:1710 -msgid "Sets the syslog \"facility\" to be used when syslog enabled." -msgstr "設定當系統記錄啟用時的被使用的系統記錄 \"facility\"。" - -# utils/misc/guc.c:1703 -#: utils/misc/guc.c:1711 -msgid "" -"Valid values are LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, " -"LOCAL7." -msgstr "合法的值有LOCAL0、LOCAL1、LOCAL2、LOCAL3、LOCAL4、LOCAL5、LOCAL6、LOCAL7。" - -# utils/misc/guc.c:1711 -#: utils/misc/guc.c:1719 -msgid "Sets the program name used to identify PostgreSQL messages in syslog." -msgstr "設定用來在系統記錄中識別 PostgreSQL 訊息的程式名稱。" - -# utils/misc/guc.c:1722 -#: utils/misc/guc.c:1730 -msgid "Sets the time zone for displaying and interpreting time stamps." -msgstr "設定用來顯示或解讀timestamp的時區。" - -# utils/misc/guc.c:1731 -#: utils/misc/guc.c:1739 -msgid "Sets the current transaction's isolation level." -msgstr "設定目前交易的隔離等級。" - -# utils/misc/guc.c:1741 -#: utils/misc/guc.c:1749 -msgid "Sets the owning group of the Unix-domain socket." -msgstr "設定Unix-domain socket的所屬群組。" - -# utils/misc/guc.c:1742 -#: utils/misc/guc.c:1750 -msgid "" -"(The owning user of the socket is always the user that starts the server.)" -msgstr "(socket的所屬使用者永遠是啟動伺服器的使用者。)" - -# utils/misc/guc.c:1751 -#: utils/misc/guc.c:1759 -msgid "Sets the directory where the Unix-domain socket will be created." -msgstr "設定用來建立Unix-domain socket的目錄位置。" - -# utils/misc/guc.c:1760 -#: utils/misc/guc.c:1769 -msgid "Sets the host name or IP address(es) to listen to." -msgstr "設定要傾聽的主機名稱或IP位置。" - -# utils/misc/guc.c:1770 -#: utils/misc/guc.c:1779 -msgid "Selects the method used for forcing WAL updates out to disk." -msgstr "選擇強制將WAL更新寫入磁碟的方式。" - -#: utils/misc/guc.c:1788 -msgid "Sets the list of known custom variable classes." -msgstr "" - -# utils/misc/guc.c:1789 -#: utils/misc/guc.c:1798 -msgid "Sets the server's data directory." -msgstr "設定伺服器的資料目錄。" - -# utils/misc/guc.c:1798 -#: utils/misc/guc.c:1808 -msgid "Sets the server's main configuration file." -msgstr "設定伺服器的主要設定檔。" - -# utils/misc/guc.c:1808 -#: utils/misc/guc.c:1818 -msgid "Sets the server's \"hba\" configuration file" -msgstr "設定伺服器的\"hba\"設定檔" - -# utils/misc/guc.c:1817 -#: utils/misc/guc.c:1828 -msgid "Sets the server's \"ident\" configuration file" -msgstr "設定伺服器的\"ident\"設定檔" - -# utils/misc/guc.c:1826 -#: utils/misc/guc.c:1838 -msgid "Writes the postmaster PID to the specified file." -msgstr "將postmaster的PID寫入指定的檔案。" - -# utils/misc/guc.c:2482 -#: utils/misc/guc.c:2477 -#, c-format -msgid "" -"%s does not know where to find the server configuration file.\n" -"You must specify the --config-file or -D invocation option or set the PGDATA " -"environment variable.\n" -msgstr "" -"%s 不知道在哪裡可以找到伺服器設定檔。\n" -"您必須指定--config-file或-D選項，或使用PGDATA環境變數。\n" - -# utils/misc/guc.c:2507 -#: utils/misc/guc.c:2502 -#, c-format -msgid "%s cannot access the server configuration file \"%s\": %s\n" -msgstr "%s 無法存取伺服器設定檔\"%s\"：%s\n" - -# utils/misc/guc.c:2527 -#: utils/misc/guc.c:2522 -#, c-format -msgid "" -"%s does not know where to find the database system data.\n" -"This can be specified as \"data_directory\" in \"%s\", or by the -D " -"invocation option, or by the PGDATA environment variable.\n" -msgstr "" -"%s 不知道在哪裡可以找到資料庫系統的資料。\n" -"您必須指定\"data_directory\"於\"%ss\"或 -D 選項，或設定PGDATA環境變數。\n" - -# utils/misc/guc.c:2550 -#: utils/misc/guc.c:2545 -#, c-format -msgid "" -"%s does not know where to find the \"hba\" configuration file.\n" -"This can be specified as \"hba_file\" in \"%s\", or by the -D invocation " -"option, or by the PGDATA environment variable.\n" -msgstr "" -"%s 不知道在哪裡可以找到\"nba\"設定檔。\n" -"您必須指定\"hba_file\"於\"%s\"或 -D 選項，或設定PGDATA環境變數設。\n" - -# utils/misc/guc.c:2573 -#: utils/misc/guc.c:2568 -#, c-format -msgid "" -"%s does not know where to find the \"ident\" configuration file.\n" -"This can be specified as \"ident_file\" in \"%s\", or by the -D invocation " -"option, or by the PGDATA environment variable.\n" -msgstr "" -"%s 不知道在哪裡可以找到\"ident\"設定檔。\n" -"您必須指定\"ident_file\"於\"%s\"或 -D 選項，或設定PGDATA環境變數。\n" - -# utils/misc/guc.c:3281 utils/misc/guc.c:3970 utils/misc/guc.c:4006 -# utils/misc/guc.c:4062 utils/misc/guc.c:4399 utils/misc/guc.c:4548 -#: utils/misc/guc.c:3274 utils/misc/guc.c:3800 utils/misc/guc.c:3840 -#: utils/misc/guc.c:3915 utils/misc/guc.c:4251 utils/misc/guc.c:4402 -#, c-format -msgid "unrecognized configuration parameter \"%s\"" -msgstr "無法識別的設定參數\"%s\"" - -# utils/misc/guc.c:3300 -#: utils/misc/guc.c:3293 -#, c-format -msgid "parameter \"%s\" cannot be changed" -msgstr "參數\"%s\"不能被修改" - -# utils/misc/guc.c:3312 -#: utils/misc/guc.c:3305 -#, c-format -msgid "parameter \"%s\" cannot be changed after server start" -msgstr "參數\"%s\"在伺服器啟動後不能被修改" - -# utils/misc/guc.c:3322 -#: utils/misc/guc.c:3315 -#, c-format -msgid "parameter \"%s\" cannot be changed now" -msgstr "參數\"%s\"現在不能被修改" - -# utils/misc/guc.c:3352 -#: utils/misc/guc.c:3345 -#, c-format -msgid "parameter \"%s\" cannot be set after connection start" -msgstr "參數\"%s\"在連線後不能被修改" - -# utils/misc/guc.c:3362 utils/misc/guc.c:3896 -#: utils/misc/guc.c:3355 -#, c-format -msgid "permission denied to set parameter \"%s\"" -msgstr "權限不足無法設定參數\"%s\"" - -# utils/misc/guc.c:3419 -#: utils/misc/guc.c:3406 -#, c-format -msgid "parameter \"%s\" requires a Boolean value" -msgstr "參數\"%s\"要求Boolean值" - -# utils/misc/guc.c:3451 utils/misc/guc.c:3559 -#: utils/misc/guc.c:3422 utils/misc/guc.c:3506 -#, c-format -msgid "invalid value for parameter \"%s\": %d" -msgstr "給參數\"%s\"的值不合法：%d" - -# utils/misc/guc.c:3511 -#: utils/misc/guc.c:3482 -#, c-format -msgid "parameter \"%s\" requires an integer value" -msgstr "參數\"%s\"要求整數值" - -# utils/misc/guc.c:3519 -#: utils/misc/guc.c:3490 -#, c-format -msgid "%d is outside the valid range for parameter \"%s\" (%d .. %d)" -msgstr "%d 超出參數 \"%s\" 的有效範圍 (%d .. %d)" - -# utils/misc/guc.c:3619 -#: utils/misc/guc.c:3566 -#, c-format -msgid "parameter \"%s\" requires a numeric value" -msgstr "參數\"%s\"要求numeric值" - -# utils/misc/guc.c:3627 -#: utils/misc/guc.c:3574 -#, c-format -msgid "%g is outside the valid range for parameter \"%s\" (%g .. %g)" -msgstr "%g 超出參數 \"%s\" 的有效範圍 (%g .. %g)" - -# utils/misc/guc.c:3660 -#: utils/misc/guc.c:3590 -#, c-format -msgid "invalid value for parameter \"%s\": %g" -msgstr "給參數\"%s\"的值不合法：%g" - -# utils/misc/guc.c:3792 -#: utils/misc/guc.c:3688 -#, c-format -msgid "invalid value for parameter \"%s\": \"%s\"" -msgstr "給參數\"%s\"的值不合法：\"%s\"" - -# commands/user.c:1258 -#: utils/misc/guc.c:3804 utils/misc/guc.c:3844 utils/misc/guc.c:4406 -#, c-format -msgid "must be superuser to examine \"%s\"" -msgstr "只有管理者能能檢查\"%s\"" - -# utils/misc/guc.c:4071 -#: utils/misc/guc.c:3924 -#, c-format -msgid "SET %s takes only one argument" -msgstr "SET %s 只接受一個引數" - -# utils/misc/guc.c:4175 -#: utils/misc/guc.c:4028 -msgid "SET requires parameter name" -msgstr "SET需要參數名稱" - -# utils/misc/guc.c:4239 -#: utils/misc/guc.c:4092 -#, c-format -msgid "attempt to redefine parameter \"%s\"" -msgstr "試圖重新定義參數\"%s\"" - -# utils/misc/guc.c:5185 -#: utils/misc/guc.c:5049 -#, c-format -msgid "could not parse setting for parameter \"%s\"" -msgstr "無法解讀參數\"%s\"的設定" - -# utils/misc/guc.c:5383 -#: utils/misc/guc.c:5247 -msgid "invalid list syntax for parameter \"log_destination\"" -msgstr "參數\"log_destination\"的list語法錯誤" - -# utils/misc/guc.c:5406 -#: utils/misc/guc.c:5270 -#, c-format -msgid "unrecognized \"log_destination\" key word: \"%s\"" -msgstr "無法識別的\"log_destination\"關鍵字：\"%s\"" - -# utils/misc/guc.c:5640 -#: utils/misc/guc.c:5498 -msgid "SET AUTOCOMMIT TO OFF is no longer supported" -msgstr "SET AUTOCOMMIT TO OFF已不被支援" - -# utils/misc/guc.c:5688 -#: utils/misc/guc.c:5546 -#, c-format -msgid "invalid syntax for \"custom_variable_classes\": \"%s\"" -msgstr "\"custom_variable_classes\"語法錯誤：\"%s\"" - -# utils/misc/guc.c:5717 -#: utils/misc/guc.c:5575 -msgid "cannot enable parameter when \"log_statement_stats\" is true" -msgstr "當 \"log_statement_stats\" 為true時無法啟用參數" - -# utils/misc/guc.c:5734 -#: utils/misc/guc.c:5592 -msgid "" -"cannot enable \"log_statement_stats\" when \"log_parser_stats\", " -"\"log_planner_stats\", or \"log_executor_stats\" is true" -msgstr "" -"當\"log_parser_stats\"、\"log_planner_stats\"或\"log_executor_stats\"\n" -"為true時不能啟用\"log_statement_stats\"" - -# utils/misc/guc.c:5753 -#: utils/misc/guc.c:5611 -msgid "cannot set transaction read-write mode inside a read-only transaction" -msgstr "無法在唯讀交易中設定交易讀寫模式" - -# guc-file.l:267 -#: guc-file.l:271 -#, c-format -msgid "syntax error in file \"%s\" line %u, near end of line" -msgstr "語法匯誤於檔案\"%s\"列 %u，檔案結尾附近" - -# guc-file.l:272 -#: guc-file.l:276 -#, c-format -msgid "syntax error in file \"%s\" line %u, near token \"%s\"" -msgstr "語法錯誤於檔案\"%s\"列 %u，token\"%s\"附近" - -# utils/mmgr/portalmem.c:170 -#: utils/mmgr/portalmem.c:173 -#, c-format -msgid "cursor \"%s\" already exists" -msgstr "cursor \"%s\"已存在" - -# utils/mmgr/portalmem.c:174 -#: utils/mmgr/portalmem.c:177 -#, c-format -msgid "closing existing cursor \"%s\"" -msgstr "關閉存在的cursor \"%s\"" - -# utils/mmgr/aset.c:338 -#: utils/mmgr/aset.c:338 -#, c-format -msgid "Failed while creating memory context \"%s\"." -msgstr "建立記憶體context \"%s\"失敗。" - -# utils/mmgr/aset.c:504 utils/mmgr/aset.c:701 utils/mmgr/aset.c:894 -#: utils/mmgr/aset.c:504 utils/mmgr/aset.c:701 utils/mmgr/aset.c:894 -#, c-format -msgid "Failed on request of size %lu." -msgstr "要求大小 %lu 失敗。" - -# utils/sort/logtape.c:202 -#: utils/sort/logtape.c:202 -#, c-format -msgid "could not write block %ld of temporary file: %m" -msgstr "無法寫入暫存檔的區塊 %ld：%m" - -# utils/sort/logtape.c:204 -#: utils/sort/logtape.c:204 -msgid "Perhaps out of disk space?" -msgstr "可能是磁碟空間用盡？" - -# utils/sort/logtape.c:221 -#: utils/sort/logtape.c:221 -#, c-format -msgid "could not read block %ld of temporary file: %m" -msgstr "無法讀取暫存檔的區塊 %ld：%m" - -# utils/sort/tuplesort.c:2082 -#: utils/sort/tuplesort.c:2082 -msgid "could not create unique index" -msgstr "無法建立唯一索引" - -# utils/sort/tuplesort.c:2083 -#: utils/sort/tuplesort.c:2083 -msgid "Table contains duplicated values." -msgstr "資料表含有重覆的值。" - -# access/transam/slru.c:638 access/transam/xlog.c:1631 -# access/transam/xlog.c:2742 access/transam/xlog.c:2832 -# access/transam/xlog.c:2930 libpq/hba.c:911 libpq/hba.c:935 -# utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 -# utils/misc/database.c:68 -#: ../port/copydir.c:67 -#, c-format -msgid "could not copy file \"%s\": %m" -msgstr "無法複製檔案\"%s\"：%m" - -# commands/sequence.c:798 executor/execGrouping.c:328 -# executor/execGrouping.c:388 executor/nodeIndexscan.c:1051 lib/dllist.c:43 -# lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:1006 -# postmaster/pgstat.c:1023 postmaster/pgstat.c:2452 postmaster/pgstat.c:2527 -# postmaster/pgstat.c:2572 postmaster/pgstat.c:2623 -# postmaster/postmaster.c:755 postmaster/postmaster.c:1625 -# postmaster/postmaster.c:2344 storage/buffer/localbuf.c:139 -# storage/file/fd.c:587 storage/file/fd.c:620 storage/file/fd.c:766 -# storage/ipc/sinval.c:789 storage/lmgr/lock.c:497 storage/smgr/md.c:138 -# storage/smgr/md.c:848 storage/smgr/smgr.c:213 utils/adt/cash.c:297 -# utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 -# utils/adt/oracle_compat.c:124 utils/adt/regexp.c:191 -# utils/adt/ri_triggers.c:3471 utils/cache/relcache.c:164 -# utils/cache/relcache.c:178 utils/cache/relcache.c:1130 -# utils/cache/typcache.c:165 utils/cache/typcache.c:487 -# utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:521 utils/fmgr/fmgr.c:532 -# utils/init/miscinit.c:213 utils/init/miscinit.c:234 -# utils/init/miscinit.c:244 utils/misc/guc.c:1898 utils/misc/guc.c:1911 -# utils/misc/guc.c:1924 utils/mmgr/aset.c:337 utils/mmgr/aset.c:503 -# utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 utils/mmgr/portalmem.c:75 -#: ../port/dirmod.c:75 ../port/dirmod.c:88 ../port/dirmod.c:101 -msgid "out of memory\n" -msgstr "記憶體用盡\n" - -#: ../port/dirmod.c:283 -#, c-format -msgid "Error setting junction for %s: %s" -msgstr "" - -# commands/tablespace.c:154 commands/tablespace.c:162 -# commands/tablespace.c:168 -#: ../port/exec.c:193 ../port/exec.c:307 ../port/exec.c:350 -#, c-format -msgid "could not identify current directory: %s" -msgstr "無法識別目前的目錄：%s" - -# utils/init/postinit.c:292 -#: ../port/exec.c:323 ../port/exec.c:359 -#, c-format -msgid "could not change directory to \"%s\"" -msgstr "無法切換目錄至\"%s\"" - -# commands/tablespace.c:355 commands/tablespace.c:984 -#: ../port/exec.c:338 -#, c-format -msgid "could not read symbolic link \"%s\"" -msgstr "無法讀取符號連結\"%s\"" - -#: ../port/exec.c:569 -#, c-format -msgid "child process exited with exit code %d" -msgstr "子行程結束，結束代碼 %d" - -#: ../port/exec.c:572 -#, c-format -msgid "child process was terminated by signal %d" -msgstr "子行程被信號 %d 結束" - -#: ../port/exec.c:575 -#, c-format -msgid "child process exited with unrecognized status %d" -msgstr "子行程結束，不明狀態代碼 %d" - -# utils/misc/guc.c:3899 -#~ msgid "Must be superuser to change this value to false." -#~ msgstr "只有管理者能將這個值設成false。" - -# utils/misc/guc.c:3901 -#~ msgid "Must be superuser to increase this value or turn it off." -#~ msgstr "只有管理者可以調低這個值或將其關閉。" - -# utils/misc/guc.c:3902 -#~ msgid "Must be superuser to increase this value." +# 2004-12-13 Zhenbang Wei +# 2004-08-06 JiaYun +# +msgid "" +msgstr "" +"Project-Id-Version: PostgreSQL 8.0\n" +"POT-Creation-Date: 2004-12-13 00:59+0000\n" +"PO-Revision-Date: 2004-12-13 14:45+0800\n" +"Last-Translator: Zhenbang Wei \n" +"Language-Team: Zhenbang Wei \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +# access/common/indextuple.c:57 +#: access/common/indextuple.c:57 +#, c-format +msgid "number of index columns (%d) exceeds limit (%d)" +msgstr "索引欄位數(%d)超過限制(%d)" + +# access/common/indextuple.c:165 +#: access/common/indextuple.c:165 +#, c-format +msgid "index row requires %lu bytes, maximum size is %lu" +msgstr "索引資料行需要 %lu 個位元組，最大值是 %lu" + +# access/common/heaptuple.c:580 +#: access/common/heaptuple.c:580 +#, c-format +msgid "number of columns (%d) exceeds limit (%d)" +msgstr "欄位數(%d)超過限制(%d)" + +# access/common/printtup.c:296 tcop/fastpath.c:186 tcop/fastpath.c:511 +# tcop/postgres.c:1480 +#: access/common/printtup.c:296 tcop/fastpath.c:186 tcop/fastpath.c:511 +#: tcop/postgres.c:1490 +#, c-format +msgid "unsupported format code: %d" +msgstr "不被支援的格式代碼：%d" + +# access/common/tupdesc.c:511 +#: access/common/tupdesc.c:511 +#, c-format +msgid "column \"%s\" cannot be declared SETOF" +msgstr "無法將欄位\"%s\"宣告為SETOF" + +# access/common/tupdesc.c:630 access/common/tupdesc.c:661 +#: access/common/tupdesc.c:630 access/common/tupdesc.c:661 +msgid "number of aliases does not match number of columns" +msgstr "別名數量與欄位數量不符" + +# access/common/tupdesc.c:655 +#: access/common/tupdesc.c:655 +msgid "no column alias was provided" +msgstr "沒有指定欄位別名" + +# access/common/tupdesc.c:679 +#: access/common/tupdesc.c:679 +msgid "could not determine row description for function returning record" +msgstr "" + +# access/hash/hashinsert.c:90 +#: access/hash/hashinsert.c:90 +#, c-format +msgid "index row size %lu exceeds hash maximum %lu" +msgstr "索引資料行大小 %lu 超過hash最大值 %lu" + +# access/hash/hashsearch.c:146 +#: access/hash/hashsearch.c:146 +msgid "hash indexes do not support whole-index scans" +msgstr "hash索引不支援完整索引掃描" + +# access/hash/hashovfl.c:522 +#: access/hash/hashovfl.c:522 +#, c-format +msgid "out of overflow pages in hash index \"%s\"" +msgstr "hash索引\"%s\"的overflow頁用盡" + +# access/hash/hashutil.c:46 +#: access/hash/hashutil.c:46 +msgid "hash indexes cannot contain null keys" +msgstr "hash索引不含包含空鍵值" + +# access/hash/hashutil.c:127 +#: access/hash/hashutil.c:127 +#, c-format +msgid "index \"%s\" is not a hash index" +msgstr "索引\"%s\"不是一個hash索引" + +# access/hash/hashutil.c:133 +#: access/hash/hashutil.c:133 +#, c-format +msgid "index \"%s\" has wrong hash version" +msgstr "索引\"%s\"的hash版本不正確" + +# access/hash/hashutil.c:134 +#: access/hash/hashutil.c:134 +msgid "Please REINDEX it." +msgstr "請執行REINDEX。" + +# access/heap/heapam.c:495 +#: access/heap/heapam.c:487 +#, c-format +msgid "could not obtain lock on relation \"%s\"" +msgstr "無法取得relation \"%s\"的鎖定" + +# access/heap/heapam.c:618 access/heap/heapam.c:653 access/heap/heapam.c:688 +# catalog/aclchk.c:286 +#: access/heap/heapam.c:610 access/heap/heapam.c:645 access/heap/heapam.c:680 +#: catalog/aclchk.c:286 +#, c-format +msgid "\"%s\" is an index" +msgstr "\"%s\"是一個索引" + +# access/heap/heapam.c:623 access/heap/heapam.c:658 access/heap/heapam.c:693 +#: access/heap/heapam.c:615 access/heap/heapam.c:650 access/heap/heapam.c:685 +#, c-format +msgid "\"%s\" is a special relation" +msgstr "\"%s\"是一個特別relation" + +# access/heap/heapam.c:628 access/heap/heapam.c:663 access/heap/heapam.c:698 +# catalog/aclchk.c:293 +#: access/heap/heapam.c:620 access/heap/heapam.c:655 access/heap/heapam.c:690 +#: catalog/aclchk.c:293 +#, c-format +msgid "\"%s\" is a composite type" +msgstr "\"%s\"是一個複合資料型別" + +# access/heap/hio.c:109 +#: access/heap/hio.c:109 +#, c-format +msgid "row is too big: size %lu, maximum size %lu" +msgstr "資料行太大：大小 %lu，最大值 %lu" + +# access/index/indexam.c:139 access/index/indexam.c:164 +# access/index/indexam.c:189 commands/comment.c:327 commands/indexcmds.c:873 +# commands/indexcmds.c:903 tcop/utility.c:93 +#: access/index/indexam.c:139 access/index/indexam.c:164 +#: access/index/indexam.c:189 commands/comment.c:327 commands/indexcmds.c:887 +#: commands/indexcmds.c:917 tcop/utility.c:93 +#, c-format +msgid "\"%s\" is not an index" +msgstr "\"%s\"不是一個索引" + +# access/nbtree/nbtinsert.c:254 +#: access/nbtree/nbtinsert.c:254 +#, c-format +msgid "duplicate key violates unique constraint \"%s\"" +msgstr "重複的鍵值違反唯一限制\"%s\"" + +# access/nbtree/nbtinsert.c:404 access/nbtree/nbtsort.c:499 +#: access/nbtree/nbtinsert.c:398 access/nbtree/nbtsort.c:499 +#, c-format +msgid "index row size %lu exceeds btree maximum, %lu" +msgstr "索引資料行大小 %lu 超過btree最大值 %lu" + +# access/nbtree/nbtpage.c:169 access/nbtree/nbtpage.c:350 +#: access/nbtree/nbtpage.c:169 access/nbtree/nbtpage.c:350 +#, c-format +msgid "index \"%s\" is not a btree" +msgstr "索引\"%s\"不是btree" + +# access/nbtree/nbtpage.c:175 access/nbtree/nbtpage.c:356 +#: access/nbtree/nbtpage.c:175 access/nbtree/nbtpage.c:356 +#, c-format +msgid "version mismatch in index \"%s\": file version %d, code version %d" +msgstr "在索引\"%s\"發現版本不符：檔案版本 %d，code版本 %d" + +# access/rtree/rtree.c:646 +#: access/rtree/rtree.c:646 +msgid "variable-length rtree keys are not supported" +msgstr "不支援可變長度rtree keys" + +# access/rtree/rtree.c:786 +#: access/rtree/rtree.c:786 +#, c-format +msgid "index row size %lu exceeds rtree maximum, %lu" +msgstr "索引資料行大小 %lu 超過rtree最大值 %lu" + +# access/transam/xlog.c:906 +#: access/transam/xlog.c:907 +#, c-format +msgid "could not create archive status file \"%s\": %m" +msgstr "無法建立備份狀態檔\"%s\"：%m" + +# access/transam/xlog.c:914 +#: access/transam/xlog.c:915 +#, c-format +msgid "could not write archive status file \"%s\": %m" +msgstr "無法寫入備份狀態檔\"%s\"：%m" + +# access/transam/xlog.c:1179 access/transam/xlog.c:1303 +# access/transam/xlog.c:5168 +#: access/transam/xlog.c:1180 access/transam/xlog.c:1304 +#: access/transam/xlog.c:5192 +#, c-format +msgid "could not close log file %u, segment %u: %m" +msgstr "無法關閉日誌檔 %u，區段 %u：%m" + +# access/transam/xlog.c:1237 access/transam/xlog.c:2405 +#: access/transam/xlog.c:1238 access/transam/xlog.c:2416 +#, c-format +msgid "could not seek in log file %u, segment %u to offset %u: %m" +msgstr "無法在日誌檔 %u 中移動，區段 %u 至偏移位置 %u：%m" + +# access/transam/xlog.c:1251 +#: access/transam/xlog.c:1252 +#, c-format +msgid "could not write to log file %u, segment %u at offset %u: %m" +msgstr "無法寫入日誌檔 %u，區段 %u 於偏移位置 %u：%m" + +# access/transam/xlog.c:1503 access/transam/xlog.c:1594 +# access/transam/xlog.c:1807 access/transam/xlog.c:1861 +# access/transam/xlog.c:1870 +#: access/transam/xlog.c:1504 access/transam/xlog.c:1595 +#: access/transam/xlog.c:1808 access/transam/xlog.c:1862 +#: access/transam/xlog.c:1871 +#, c-format +msgid "could not open file \"%s\" (log file %u, segment %u): %m" +msgstr "無法開啟檔案\"%s\"(日誌檔 %u，區段 %u)：%m" + +# access/transam/slru.c:645 access/transam/xlog.c:1526 +# access/transam/xlog.c:1646 access/transam/xlog.c:2911 +# access/transam/xlog.c:5308 access/transam/xlog.c:5426 +# postmaster/postmaster.c:3366 +#: access/transam/slru.c:645 access/transam/xlog.c:1527 +#: access/transam/xlog.c:1647 access/transam/xlog.c:2922 +#: access/transam/xlog.c:5340 access/transam/xlog.c:5458 +#: postmaster/postmaster.c:2907 +#, c-format +msgid "could not create file \"%s\": %m" +msgstr "無法建立檔案\"%s\"：%m" + +# access/transam/xlog.c:1555 access/transam/xlog.c:1679 +# access/transam/xlog.c:2964 access/transam/xlog.c:3002 commands/copy.c:1117 +# commands/tablespace.c:668 commands/tablespace.c:674 +# postmaster/postmaster.c:3430 utils/init/miscinit.c:832 +# utils/init/miscinit.c:841 utils/misc/guc.c:4934 utils/misc/guc.c:4998 +#: access/transam/xlog.c:1556 access/transam/xlog.c:1680 +#: access/transam/xlog.c:2975 access/transam/xlog.c:3013 commands/copy.c:1117 +#: commands/tablespace.c:664 commands/tablespace.c:670 +#: postmaster/postmaster.c:2917 postmaster/postmaster.c:2927 +#: utils/init/miscinit.c:832 utils/init/miscinit.c:841 utils/misc/guc.c:4798 +#: utils/misc/guc.c:4862 +#, c-format +msgid "could not write to file \"%s\": %m" +msgstr "無法寫入檔案\"%s\"：%m" + +# access/transam/slru.c:673 access/transam/xlog.c:1562 +# access/transam/xlog.c:1686 access/transam/xlog.c:3008 +#: access/transam/slru.c:673 access/transam/xlog.c:1563 +#: access/transam/xlog.c:1687 access/transam/xlog.c:3019 +#, c-format +msgid "could not fsync file \"%s\": %m" +msgstr "無法fsync檔案 \"%s\"：%m" + +# access/transam/slru.c:680 access/transam/xlog.c:1567 +# access/transam/xlog.c:1691 access/transam/xlog.c:3013 +#: access/transam/slru.c:680 access/transam/xlog.c:1568 +#: access/transam/xlog.c:1692 access/transam/xlog.c:3024 +#, c-format +msgid "could not close file \"%s\": %m" +msgstr "無法關閉檔案\"%s\"：%m" + +# access/transam/slru.c:638 access/transam/xlog.c:1631 +# access/transam/xlog.c:2742 access/transam/xlog.c:2832 +# access/transam/xlog.c:2930 libpq/hba.c:911 libpq/hba.c:935 +# utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 +# utils/misc/database.c:68 +#: access/transam/slru.c:638 access/transam/xlog.c:1632 +#: access/transam/xlog.c:2753 access/transam/xlog.c:2843 +#: access/transam/xlog.c:2941 libpq/hba.c:912 libpq/hba.c:936 +#: utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 +#: utils/misc/database.c:68 +#, c-format +msgid "could not open file \"%s\": %m" +msgstr "無法開啟檔案\"%s\"：%m" + +# access/transam/xlog.c:1659 access/transam/xlog.c:2942 +# access/transam/xlog.c:5397 access/transam/xlog.c:5448 +# access/transam/xlog.c:5520 access/transam/xlog.c:5545 +# access/transam/xlog.c:5583 +#: access/transam/xlog.c:1660 access/transam/xlog.c:2953 +#: access/transam/xlog.c:5429 access/transam/xlog.c:5480 +#: access/transam/xlog.c:5552 access/transam/xlog.c:5577 +#: access/transam/xlog.c:5615 +#, c-format +msgid "could not read file \"%s\": %m" +msgstr "無法讀取檔案\"%s\"：%m" + +# access/transam/xlog.c:1662 +#: access/transam/xlog.c:1663 +#, c-format +msgid "not enough data in file \"%s\"" +msgstr "檔案\"%s\"內的資料不足" + +# access/transam/xlog.c:1774 +#: access/transam/xlog.c:1775 +#, c-format +msgid "" +"could not link file \"%s\" to \"%s\" (initialization of log file %u, segment " +"%u): %m" +msgstr "" + +# access/transam/xlog.c:1781 +#: access/transam/xlog.c:1782 +#, c-format +msgid "" +"could not rename file \"%s\" to \"%s\" (initialization of log file %u, " +"segment %u): %m" +msgstr "無法將檔案\"%s\"重新命名為\"%s\"(初始化記錄檔%u，區段 %u)：%m" + +# access/transam/xlog.c:1936 access/transam/xlog.c:2038 +# access/transam/xlog.c:5291 +#: access/transam/xlog.c:1937 access/transam/xlog.c:2039 +#: access/transam/xlog.c:5323 +#, c-format +msgid "could not stat file \"%s\": %m" +msgstr "無法取得檔案狀態\"%s\"：%m" + +# access/transam/xlog.c:1944 access/transam/xlog.c:5453 +# access/transam/xlog.c:5607 postmaster/postmaster.c:3504 +#: access/transam/xlog.c:1945 access/transam/xlog.c:5485 +#: access/transam/xlog.c:5639 commands/tablespace.c:589 +#, c-format +msgid "could not remove file \"%s\": %m" +msgstr "無法刪除檔案\"%s\"：%m" + +# access/transam/xlog.c:2019 +#: access/transam/xlog.c:2020 +#, c-format +msgid "archive file \"%s\" has wrong size: %lu instead of %lu" +msgstr "備份檔\"%s\"大小不正確：%lu 而非 %lu" + +# access/transam/xlog.c:2026 +#: access/transam/xlog.c:2027 +#, c-format +msgid "restored log file \"%s\" from archive" +msgstr "從備份還原日誌檔\"%s\"" + +# access/transam/xlog.c:2051 +#: access/transam/xlog.c:2052 +#, c-format +msgid "could not restore file \"%s\" from archive: return code %d" +msgstr "無法從備份還原檔案\"%s\"：傳回碼 %d" + +# access/transam/xlog.c:2111 +#: access/transam/xlog.c:2120 +#, c-format +msgid "could not open transaction log directory \"%s\": %m" +msgstr "無法開啟交易日誌目錄\"%s\"：%m" + +# access/transam/xlog.c:2156 +#: access/transam/xlog.c:2165 +#, c-format +msgid "recycled transaction log file \"%s\"" +msgstr "" + +# access/transam/xlog.c:2163 +#: access/transam/xlog.c:2173 +#, c-format +msgid "removing transaction log file \"%s\"" +msgstr "刪除交易日誌檔\"%s\"" + +# access/transam/xlog.c:2185 +#: access/transam/xlog.c:2196 +#, c-format +msgid "could not read transaction log directory \"%s\": %m" +msgstr "無法讀取交易記錄目錄 \"%s\": %m" + +# access/transam/xlog.c:2269 +#: access/transam/xlog.c:2280 +#, c-format +msgid "incorrect resource manager data checksum in record at %X/%X" +msgstr "" + +# access/transam/xlog.c:2292 +#: access/transam/xlog.c:2303 +#, c-format +msgid "incorrect checksum of backup block %d in record at %X/%X" +msgstr "" + +# access/transam/xlog.c:2365 access/transam/xlog.c:2435 +#: access/transam/xlog.c:2376 access/transam/xlog.c:2446 +#, c-format +msgid "invalid record offset at %X/%X" +msgstr "無效的記錄偏移位置於 %X/%X" + +# access/transam/xlog.c:2413 +#: access/transam/xlog.c:2424 +#, c-format +msgid "could not read from log file %u, segment %u at offset %u: %m" +msgstr "無法讀取日誌檔 %u，區段 %u 於偏移位置 %u：%m" + +# access/transam/xlog.c:2443 +#: access/transam/xlog.c:2454 +#, c-format +msgid "contrecord is requested by %X/%X" +msgstr "" + +# access/transam/xlog.c:2458 +#: access/transam/xlog.c:2469 +#, c-format +msgid "record with zero length at %X/%X" +msgstr "記錄長度為0於 %X/%X" + +# access/transam/xlog.c:2465 +#: access/transam/xlog.c:2476 +#, c-format +msgid "invalid resource manager ID %u at %X/%X" +msgstr "無效的資源管理器 ID %u 於 %X/%X" + +# access/transam/xlog.c:2503 +#: access/transam/xlog.c:2514 +#, c-format +msgid "record length %u at %X/%X too long" +msgstr "記錄長度 %u 於 %X/%X 太長" + +# access/transam/xlog.c:2539 +#: access/transam/xlog.c:2550 +#, c-format +msgid "could not read from log file %u, segment %u, offset %u: %m" +msgstr "無法讀取日誌檔 %u，區段 %u，偏移位置 %u：%m" + +# access/transam/xlog.c:2548 +#: access/transam/xlog.c:2559 +#, c-format +msgid "there is no contrecord flag in log file %u, segment %u, offset %u" +msgstr "" + +# access/transam/xlog.c:2558 +#: access/transam/xlog.c:2569 +#, c-format +msgid "invalid contrecord length %u in log file %u, segment %u, offset %u" +msgstr "" + +# access/transam/xlog.c:2625 +#: access/transam/xlog.c:2636 +#, c-format +msgid "invalid magic number %04X in log file %u, segment %u, offset %u" +msgstr "" + +# access/transam/xlog.c:2632 +#: access/transam/xlog.c:2643 +#, c-format +msgid "invalid info bits %04X in log file %u, segment %u, offset %u" +msgstr "" + +# access/transam/xlog.c:2654 access/transam/xlog.c:2662 +#: access/transam/xlog.c:2665 access/transam/xlog.c:2673 +msgid "WAL file is from different system" +msgstr "WAL 檔是來自不同系統" + +# access/transam/xlog.c:2655 +#: access/transam/xlog.c:2666 +#, c-format +msgid "WAL file SYSID is %s, pg_control SYSID is %s" +msgstr "WAL 檔 SYSID 為 %s，pg_control SYSID 為 %s" + +# access/transam/xlog.c:2663 +#: access/transam/xlog.c:2674 +msgid "Incorrect XLOG_SEG_SIZE in page header." +msgstr "page header中的XLOG_SEG_SIZE不正確" + +# access/transam/xlog.c:2672 +#: access/transam/xlog.c:2683 +#, c-format +msgid "unexpected pageaddr %X/%X in log file %u, segment %u, offset %u" +msgstr "非預期的pageaddr %X/%X於日誌檔 %u，區段 %u，偏移位置 %u" + +# access/transam/xlog.c:2684 +#: access/transam/xlog.c:2695 +#, c-format +msgid "unexpected timeline ID %u in log file %u, segment %u, offset %u" +msgstr "非預期的timeline ID %u於日誌檔 %u，區段 %u，偏移位置 %u" + +# access/transam/xlog.c:2702 +#: access/transam/xlog.c:2713 +#, c-format +msgid "" +"out-of-sequence timeline ID %u (after %u) in log file %u, segment %u, offset " +"%u" +msgstr "" + +# access/transam/xlog.c:2771 +#: access/transam/xlog.c:2782 +#, c-format +msgid "syntax error in history file: %s" +msgstr "歷史記錄檔中有語法錯誤：%s" + +# access/transam/xlog.c:2772 +#: access/transam/xlog.c:2783 +msgid "Expected a numeric timeline ID." +msgstr "預期一個數字timeline ID。" + +# access/transam/xlog.c:2777 +#: access/transam/xlog.c:2788 +#, c-format +msgid "invalid data in history file: %s" +msgstr "歷史記錄檔中有無效資料：%s" + +# access/transam/xlog.c:2778 +#: access/transam/xlog.c:2789 +msgid "Timeline IDs must be in increasing sequence." +msgstr "" + +# access/transam/xlog.c:2791 +#: access/transam/xlog.c:2802 +#, c-format +msgid "invalid data in history file \"%s\"" +msgstr "歷史記錄檔\"%s\"中有無效資料" + +# access/transam/xlog.c:2792 +#: access/transam/xlog.c:2803 +msgid "Timeline IDs must be less than child timeline's ID." +msgstr "" + +# access/transam/xlog.c:3030 +#: access/transam/xlog.c:3041 +#, c-format +msgid "could not link file \"%s\" to \"%s\": %m" +msgstr "無法將檔案\"%s\"連結到\"%s\"：%m" + +# access/transam/xlog.c:3037 access/transam/xlog.c:3819 +# access/transam/xlog.c:3862 commands/user.c:282 commands/user.c:412 +# postmaster/pgarch.c:597 +#: access/transam/xlog.c:3048 access/transam/xlog.c:3830 +#: access/transam/xlog.c:3873 commands/user.c:282 commands/user.c:412 +#: postmaster/pgarch.c:596 +#, c-format +msgid "could not rename file \"%s\" to \"%s\": %m" +msgstr "無法將檔案\"%s\"重新命名為\"%s\"：%m" + +# access/transam/xlog.c:3098 +#: access/transam/xlog.c:3109 +msgid "invalid LC_COLLATE setting" +msgstr "不合法的LC_COLLATE設定" + +# access/transam/xlog.c:3103 +#: access/transam/xlog.c:3114 +msgid "invalid LC_CTYPE setting" +msgstr "不合法的LC_CTYPE設定" + +# access/transam/xlog.c:3122 +#: access/transam/xlog.c:3133 +msgid "sizeof(ControlFileData) is larger than BLCKSZ; fix either one" +msgstr "sizeof(ControlFileData) 大於 BLCKSZ; 修正其中一項" + +# access/transam/xlog.c:3132 +#: access/transam/xlog.c:3143 +#, c-format +msgid "could not create control file \"%s\": %m" +msgstr "無法建立控制檔\"%s\"：%m" + +# access/transam/xlog.c:3143 access/transam/xlog.c:3330 +#: access/transam/xlog.c:3154 access/transam/xlog.c:3341 +#, c-format +msgid "could not write to control file: %m" +msgstr "無法寫入控制檔：%m" + +# access/transam/xlog.c:3149 access/transam/xlog.c:3336 +#: access/transam/xlog.c:3160 access/transam/xlog.c:3347 +#, c-format +msgid "could not fsync control file: %m" +msgstr "無法fsync控制檔：%m" + +# access/transam/xlog.c:3154 access/transam/xlog.c:3341 +#: access/transam/xlog.c:3165 access/transam/xlog.c:3352 +#, c-format +msgid "could not close control file: %m" +msgstr "無法關閉控制檔：%m" + +# access/transam/xlog.c:3170 access/transam/xlog.c:3319 +#: access/transam/xlog.c:3181 access/transam/xlog.c:3330 +#, c-format +msgid "could not open control file \"%s\": %m" +msgstr "無法開啟控制檔\"%s\"：%m" + +# access/transam/xlog.c:3176 +#: access/transam/xlog.c:3187 +#, c-format +msgid "could not read from control file: %m" +msgstr "無法讀取控制檔：%m" + +# access/transam/xlog.c:3188 access/transam/xlog.c:3218 +# access/transam/xlog.c:3225 access/transam/xlog.c:3232 +# access/transam/xlog.c:3239 access/transam/xlog.c:3246 +# access/transam/xlog.c:3253 access/transam/xlog.c:3262 +# access/transam/xlog.c:3269 access/transam/xlog.c:3277 +# utils/init/miscinit.c:907 +#: access/transam/xlog.c:3199 access/transam/xlog.c:3229 +#: access/transam/xlog.c:3236 access/transam/xlog.c:3243 +#: access/transam/xlog.c:3250 access/transam/xlog.c:3257 +#: access/transam/xlog.c:3264 access/transam/xlog.c:3273 +#: access/transam/xlog.c:3280 access/transam/xlog.c:3288 +#: utils/init/miscinit.c:907 +msgid "database files are incompatible with server" +msgstr "資料庫檔案與伺服器不相容" + +# access/transam/xlog.c:3189 +#: access/transam/xlog.c:3200 +#, c-format +msgid "" +"The database cluster was initialized with PG_CONTROL_VERSION %d, but the " +"server was compiled with PG_CONTROL_VERSION %d." +msgstr "資料庫 cluster 已以 PG_CONTROL_VERSION %d 初始化，但伺服器是以 PG_CONTROL_VERSION %d 編譯。" + +# access/transam/xlog.c:3192 access/transam/xlog.c:3222 +#: access/transam/xlog.c:3203 access/transam/xlog.c:3233 +msgid "It looks like you need to initdb." +msgstr "你可能需要執行initdb。" + +# access/transam/xlog.c:3202 +#: access/transam/xlog.c:3213 +msgid "incorrect checksum in control file" +msgstr "控制檔的checksum不正確" + +# access/transam/xlog.c:3219 +#: access/transam/xlog.c:3230 +#, c-format +msgid "" +"The database cluster was initialized with CATALOG_VERSION_NO %d, but the " +"server was compiled with CATALOG_VERSION_NO %d." +msgstr "資料庫 cluster 已以 CATALOG_VERSION_NO %d 初始化，但伺服器是以 CATALOG_VERSION_NO %d 編譯。" + +# access/transam/xlog.c:3226 +#: access/transam/xlog.c:3237 +#, c-format +msgid "" +"The database cluster was initialized with BLCKSZ %d, but the server was " +"compiled with BLCKSZ %d." +msgstr "資料庫 cluster 已以 BLCKSZ %d 初始化，但伺服器是以 BLCKSZ %d 編譯。" + +# access/transam/xlog.c:3229 access/transam/xlog.c:3236 +# access/transam/xlog.c:3243 access/transam/xlog.c:3250 +# access/transam/xlog.c:3257 access/transam/xlog.c:3265 +# access/transam/xlog.c:3272 access/transam/xlog.c:3281 +#: access/transam/xlog.c:3240 access/transam/xlog.c:3247 +#: access/transam/xlog.c:3254 access/transam/xlog.c:3261 +#: access/transam/xlog.c:3268 access/transam/xlog.c:3276 +#: access/transam/xlog.c:3283 access/transam/xlog.c:3292 +msgid "It looks like you need to recompile or initdb." +msgstr "你可能需要重新編譯initdb。" + +# access/transam/xlog.c:3233 +#: access/transam/xlog.c:3244 +#, c-format +msgid "" +"The database cluster was initialized with RELSEG_SIZE %d, but the server was " +"compiled with RELSEG_SIZE %d." +msgstr "資料庫 cluster 已以 RELSEG_SIZE %d 初始化，但伺服器是以 RELSEG_SIZE %d 編譯。" + +# access/transam/xlog.c:3240 +#: access/transam/xlog.c:3251 +#, c-format +msgid "" +"The database cluster was initialized with XLOG_SEG_SIZE %d, but the server " +"was compiled with XLOG_SEG_SIZE %d." +msgstr "資料庫 cluster 已以 XLOG_SEG_SIZE %d 初始化，但伺服器是以 XLOG_SEG_SIZE %d 編譯。" + +# access/transam/xlog.c:3247 +#: access/transam/xlog.c:3258 +#, c-format +msgid "" +"The database cluster was initialized with NAMEDATALEN %d, but the server was " +"compiled with NAMEDATALEN %d." +msgstr "資料庫 cluster 已以 NAMEDATALEN %d 初始化，但伺服器是以 NAMEDATALEN %d 編譯。" + +# access/transam/xlog.c:3254 +#: access/transam/xlog.c:3265 +#, c-format +msgid "" +"The database cluster was initialized with FUNC_MAX_ARGS %d, but the server " +"was compiled with FUNC_MAX_ARGS %d." +msgstr "資料庫 cluster 已以 FUNC_MAX_ARGS %d 初始化，但伺服器是以 FUNC_MAX_ARGS %d 編譯。" + +# access/transam/xlog.c:3263 +#: access/transam/xlog.c:3274 +msgid "" +"The database cluster was initialized without HAVE_INT64_TIMESTAMP but the " +"server was compiled with HAVE_INT64_TIMESTAMP." +msgstr "資料庫 cluster 已以非 HAVE_INT64_TIMESTAMP 初始化，但伺服器是以 HAVE_INT64_TIMESTAMP 編譯。" + +# access/transam/xlog.c:3270 +#: access/transam/xlog.c:3281 +msgid "" +"The database cluster was initialized with HAVE_INT64_TIMESTAMP but the " +"server was compiled without HAVE_INT64_TIMESTAMP." +msgstr "資料庫 cluster 已以 HAVE_INT64_TIMESTAMP 初始化，但伺服器是以非 HAVE_INT64_TIMESTAMP 編譯。" + +# access/transam/xlog.c:3278 +#: access/transam/xlog.c:3289 +#, c-format +msgid "" +"The database cluster was initialized with LOCALE_NAME_BUFLEN %d, but the " +"server was compiled with LOCALE_NAME_BUFLEN %d." +msgstr "資料庫 cluster 已以 LOCALE_NAME_BUFLEN %d 初始化，但伺服器是以 LOCALE_NAME_BUFLEN %d 編譯。" + +# access/transam/xlog.c:3284 access/transam/xlog.c:3291 +#: access/transam/xlog.c:3295 access/transam/xlog.c:3302 +msgid "database files are incompatible with operating system" +msgstr "資料庫檔案與作業系統不相容" + +# access/transam/xlog.c:3285 +#: access/transam/xlog.c:3296 +#, c-format +msgid "" +"The database cluster was initialized with LC_COLLATE \"%s\", which is not " +"recognized by setlocale()." +msgstr "資料庫 cluster 已以 LC_COLLATE \"%s\" 初始化，但 setlocale() 無法辨識該 LC_COLLATE。" + +# access/transam/xlog.c:3288 access/transam/xlog.c:3295 +#: access/transam/xlog.c:3299 access/transam/xlog.c:3306 +msgid "It looks like you need to initdb or install locale support." +msgstr "你可能需要執行initdb或安裝locale支援。" + +# access/transam/xlog.c:3292 +#: access/transam/xlog.c:3303 +#, c-format +msgid "" +"The database cluster was initialized with LC_CTYPE \"%s\", which is not " +"recognized by setlocale()." +msgstr "資料庫 cluster 已以 LC_CTYPE \"%s\" 初始化，但 setlocale() 無法辨識該 LC_CTYPE。" + +# access/transam/xlog.c:3518 +#: access/transam/xlog.c:3529 +#, c-format +msgid "could not write bootstrap transaction log file: %m" +msgstr "" + +# access/transam/xlog.c:3524 +#: access/transam/xlog.c:3535 +#, c-format +msgid "could not fsync bootstrap transaction log file: %m" +msgstr "" + +# access/transam/xlog.c:3529 +#: access/transam/xlog.c:3540 +#, c-format +msgid "could not close bootstrap transaction log file: %m" +msgstr "" + +# access/transam/xlog.c:3591 +#: access/transam/xlog.c:3602 +#, c-format +msgid "could not open recovery command file \"%s\": %m" +msgstr "無法開啟還原命令檔\"%s\"：%m" + +# access/transam/xlog.c:3596 +#: access/transam/xlog.c:3607 +msgid "starting archive recovery" +msgstr "開始備份檔還原" + +# access/transam/xlog.c:3641 +#: access/transam/xlog.c:3652 +#, c-format +msgid "restore_command = \"%s\"" +msgstr "" + +# access/transam/xlog.c:3655 +#: access/transam/xlog.c:3666 +#, c-format +msgid "recovery_target_timeline is not a valid number: \"%s\"" +msgstr "" + +# access/transam/xlog.c:3660 +#: access/transam/xlog.c:3671 +#, c-format +msgid "recovery_target_timeline = %u" +msgstr "" + +# access/transam/xlog.c:3663 +#: access/transam/xlog.c:3674 +msgid "recovery_target_timeline = latest" +msgstr "" + +# access/transam/xlog.c:3671 +#: access/transam/xlog.c:3682 +#, c-format +msgid "recovery_target_xid is not a valid number: \"%s\"" +msgstr "" + +# access/transam/xlog.c:3674 +#: access/transam/xlog.c:3685 +#, c-format +msgid "recovery_target_xid = %u" +msgstr "" + +# access/transam/xlog.c:3699 +#: access/transam/xlog.c:3710 +#, c-format +msgid "recovery_target_time = %s" +msgstr "" + +# access/transam/xlog.c:3716 +#: access/transam/xlog.c:3727 +#, c-format +msgid "recovery_target_inclusive = %s" +msgstr "" + +# access/transam/xlog.c:3720 +#: access/transam/xlog.c:3731 +#, c-format +msgid "unrecognized recovery parameter \"%s\"" +msgstr "無法識別的還原參數\"%s\"" + +# access/transam/xlog.c:3728 +#: access/transam/xlog.c:3739 +#, c-format +msgid "syntax error in recovery command file: %s" +msgstr "還原命令檔有語法錯誤：%s" + +# access/transam/xlog.c:3730 +#: access/transam/xlog.c:3741 +msgid "Lines should have the format parameter = 'value'." +msgstr "" + +# access/transam/xlog.c:3735 +#: access/transam/xlog.c:3746 +#, c-format +msgid "recovery command file \"%s\" did not specify restore_command" +msgstr "" + +# access/transam/xlog.c:3754 +#: access/transam/xlog.c:3765 +#, c-format +msgid "recovery_target_timeline %u does not exist" +msgstr "" + +# access/transam/xlog.c:3866 +#: access/transam/xlog.c:3877 +msgid "archive recovery complete" +msgstr "備份檔還原完成" + +# access/transam/xlog.c:3950 +#: access/transam/xlog.c:3961 +#, c-format +msgid "recovery stopping after commit of transaction %u, time %s" +msgstr "還原在確認交易 %u 後停止，時間 %s" + +# access/transam/xlog.c:3954 +#: access/transam/xlog.c:3965 +#, c-format +msgid "recovery stopping before commit of transaction %u, time %s" +msgstr "還原在確認交易 %u 前停止，時間 %s" + +# access/transam/xlog.c:3961 +#: access/transam/xlog.c:3972 +#, c-format +msgid "recovery stopping after abort of transaction %u, time %s" +msgstr "還原在取消交易 %u 後停止，時間 %s" + +# access/transam/xlog.c:3965 +#: access/transam/xlog.c:3976 +#, c-format +msgid "recovery stopping before abort of transaction %u, time %s" +msgstr "還原取消交易 %u 前停止，時間 %s" + +# access/transam/xlog.c:4007 +#: access/transam/xlog.c:4018 +msgid "control file contains invalid data" +msgstr "控制檔包含無效的資料" + +# access/transam/xlog.c:4011 +#: access/transam/xlog.c:4022 +#, c-format +msgid "database system was shut down at %s" +msgstr "資料庫系統於 %s 被關閉" + +# access/transam/xlog.c:4015 +#: access/transam/xlog.c:4026 +#, c-format +msgid "database system shutdown was interrupted at %s" +msgstr "關閉資料庫系統於 %s 被中斷" + +# access/transam/xlog.c:4019 +#: access/transam/xlog.c:4030 +#, c-format +msgid "database system was interrupted while in recovery at %s" +msgstr "資料庫系統還原於 %s 被中斷" + +# access/transam/xlog.c:4021 +#: access/transam/xlog.c:4032 +msgid "" +"This probably means that some data is corrupted and you will have to use the " +"last backup for recovery." +msgstr "這表示部份資料可能損壞，你需要使用最後的備份進行還原。" + +# access/transam/xlog.c:4025 +#: access/transam/xlog.c:4036 +#, c-format +msgid "database system was interrupted at %s" +msgstr "資料庫系統於 %s 被中斷" + +# access/transam/xlog.c:4057 +#: access/transam/xlog.c:4068 +#, c-format +msgid "requested timeline %u is not a child of database system timeline %u" +msgstr "" + +# access/transam/xlog.c:4072 access/transam/xlog.c:4094 +#: access/transam/xlog.c:4083 access/transam/xlog.c:4105 +#, c-format +msgid "checkpoint record is at %X/%X" +msgstr "檢查點記錄於 %X/%X" + +# access/transam/xlog.c:4079 +#: access/transam/xlog.c:4090 +msgid "could not locate required checkpoint record" +msgstr "找不到要求的檢查點記錄" + +# access/transam/xlog.c:4080 +#: access/transam/xlog.c:4091 +#, c-format +msgid "" +"If you are not restoring from a backup, try removing the file \"%s/" +"backup_label\"." +msgstr "" + +# access/transam/xlog.c:4104 +#: access/transam/xlog.c:4115 +#, c-format +msgid "using previous checkpoint record at %X/%X" +msgstr "使用前一個檢查點記錄於 %X/%X" + +# access/transam/xlog.c:4111 +#: access/transam/xlog.c:4122 +msgid "could not locate a valid checkpoint record" +msgstr "找不到有效的檢查點記錄" + +# access/transam/xlog.c:4120 +#: access/transam/xlog.c:4131 +#, c-format +msgid "redo record is at %X/%X; undo record is at %X/%X; shutdown %s" +msgstr "redo記錄於 %X/%X，undo記錄於 %X/%X，關閉 %s" + +# access/transam/xlog.c:4125 +#: access/transam/xlog.c:4136 +#, c-format +msgid "next transaction ID: %u; next OID: %u" +msgstr "下一個交易ID：%u，下一個OID：%u" + +# access/transam/xlog.c:4129 +#: access/transam/xlog.c:4140 +msgid "invalid next transaction ID" +msgstr "不合法的下一個交易ID" + +# access/transam/xlog.c:4146 +#: access/transam/xlog.c:4157 +msgid "invalid redo in checkpoint record" +msgstr "檢查點記錄中有不合法的redo記茄" + +# access/transam/xlog.c:4160 +#: access/transam/xlog.c:4171 +msgid "invalid redo/undo record in shutdown checkpoint" +msgstr "關閉檢查點中有不合法的redo/undo記錄" + +# access/transam/xlog.c:4178 +#: access/transam/xlog.c:4189 +msgid "automatic recovery in progress" +msgstr "自動還原執行中" + +# access/transam/xlog.c:4181 +#: access/transam/xlog.c:4192 +msgid "" +"database system was not properly shut down; automatic recovery in progress" +msgstr "資料庫系統未被正常關閉，自動還原執行中" + +# access/transam/xlog.c:4218 +#: access/transam/xlog.c:4229 +#, c-format +msgid "redo starts at %X/%X" +msgstr "redo開始於 %X/%X" + +# access/transam/xlog.c:4276 +#: access/transam/xlog.c:4287 +#, c-format +msgid "redo done at %X/%X" +msgstr "redo完成於 %X/%X" + +# access/transam/xlog.c:4284 +#: access/transam/xlog.c:4295 +msgid "redo is not required" +msgstr "不需要redo" + +# access/transam/xlog.c:4304 +#: access/transam/xlog.c:4315 +msgid "requested recovery stop point is before end time of backup dump" +msgstr "" + +# access/transam/xlog.c:4308 +#: access/transam/xlog.c:4319 +msgid "WAL ends before end time of backup dump" +msgstr "" + +# access/transam/xlog.c:4323 +#: access/transam/xlog.c:4334 +#, c-format +msgid "selected new timeline ID: %u" +msgstr "" + +# access/transam/xlog.c:4405 +#: access/transam/xlog.c:4416 +#, c-format +msgid "undo starts at %X/%X" +msgstr "undo開始於 %X/%X" + +# access/transam/xlog.c:4416 +#: access/transam/xlog.c:4427 +#, c-format +msgid "undo done at %X/%X" +msgstr "undo完成於 %X/%X" + +# access/transam/xlog.c:4421 +#: access/transam/xlog.c:4432 +msgid "undo is not required" +msgstr "不需要undo" + +# access/transam/xlog.c:4489 +#: access/transam/xlog.c:4500 +msgid "database system is ready" +msgstr "資料庫系統待命" + +# access/transam/xlog.c:4528 +#: access/transam/xlog.c:4539 +msgid "invalid primary checkpoint link in control file" +msgstr "控制檔中有無效的主要檢查點連結" + +# access/transam/xlog.c:4532 +#: access/transam/xlog.c:4543 +msgid "invalid secondary checkpoint link in control file" +msgstr "控制檔中有無效的次要檢查點連結" + +# access/transam/xlog.c:4536 +#: access/transam/xlog.c:4547 +msgid "invalid checkpoint link in backup_label file" +msgstr "backup_label檔案中有無效的檢查點連結" + +# access/transam/xlog.c:4550 +#: access/transam/xlog.c:4561 +msgid "invalid primary checkpoint record" +msgstr "無效的主檢查點記錄" + +# access/transam/xlog.c:4554 +#: access/transam/xlog.c:4565 +msgid "invalid secondary checkpoint record" +msgstr "無效的次要檢查點記錄" + +# access/transam/xlog.c:4558 +#: access/transam/xlog.c:4569 +msgid "invalid checkpoint record" +msgstr "無效的檢查點記錄" + +# access/transam/xlog.c:4569 +#: access/transam/xlog.c:4580 +msgid "invalid resource manager ID in primary checkpoint record" +msgstr "主要檢查點記錄中有無效的資源管理器ID" + +# access/transam/xlog.c:4573 +#: access/transam/xlog.c:4584 +msgid "invalid resource manager ID in secondary checkpoint record" +msgstr "次要檢查點記錄中有無效的資源管理器ID" + +# access/transam/xlog.c:4577 +#: access/transam/xlog.c:4588 +msgid "invalid resource manager ID in checkpoint record" +msgstr "檢查點記錄中有無效的資源管理器ID" + +# access/transam/xlog.c:4589 +#: access/transam/xlog.c:4600 +msgid "invalid xl_info in primary checkpoint record" +msgstr "主要檢查點記錄中有無效的xl_info" + +# access/transam/xlog.c:4593 +#: access/transam/xlog.c:4604 +msgid "invalid xl_info in secondary checkpoint record" +msgstr "次要檢查點記錄中有無效的xl_info" + +# access/transam/xlog.c:4597 +#: access/transam/xlog.c:4608 +msgid "invalid xl_info in checkpoint record" +msgstr "檢查點記錄中有無效的xl_info" + +# access/transam/xlog.c:4608 +#: access/transam/xlog.c:4619 +msgid "invalid length of primary checkpoint record" +msgstr "主要檢查點記錄的長度無效" + +# access/transam/xlog.c:4612 +#: access/transam/xlog.c:4623 +msgid "invalid length of secondary checkpoint record" +msgstr "次要檢查點記錄的長度無效" + +# access/transam/xlog.c:4616 +#: access/transam/xlog.c:4627 +msgid "invalid length of checkpoint record" +msgstr "無效的檢查點記錄長度" + +# access/transam/xlog.c:4669 +#: access/transam/xlog.c:4680 +msgid "shutting down" +msgstr "正在關閉" + +# access/transam/xlog.c:4678 +#: access/transam/xlog.c:4689 +msgid "database system is shut down" +msgstr "資料庫系統已關閉" + +# postmaster/bgwriter.c:555 +#: access/transam/xlog.c:4880 +msgid "checkpoint starting" +msgstr "開始檢查點" + +# access/transam/xlog.c:4891 +#: access/transam/xlog.c:4909 +msgid "" +"concurrent transaction log activity while database system is shutting down" +msgstr "" + +#: access/transam/xlog.c:4981 +#, c-format +msgid "" +"checkpoint complete; %d transaction log file(s) added, %d removed, %d " +"recycled" +msgstr "" + +# access/transam/xlog.c:5017 +#: access/transam/xlog.c:5041 +#, c-format +msgid "unexpected timeline ID %u (after %u) in checkpoint record" +msgstr "" + +# access/transam/xlog.c:5040 +#: access/transam/xlog.c:5064 +#, c-format +msgid "unexpected timeline ID %u (should be %u) in checkpoint record" +msgstr "" + +# access/transam/xlog.c:5161 access/transam/xlog.c:5193 +#: access/transam/xlog.c:5185 access/transam/xlog.c:5217 +#, c-format +msgid "could not fsync log file %u, segment %u: %m" +msgstr "無法fsync日誌檔 %u，區段 %u：%m" + +# access/transam/xlog.c:5201 +#: access/transam/xlog.c:5225 +#, c-format +msgid "could not fdatasync log file %u, segment %u: %m" +msgstr "無法fdatasync日誌檔 %u，區段 %u：%m" + +# access/transam/xlog.c:5244 access/transam/xlog.c:5363 +#: access/transam/xlog.c:5268 access/transam/xlog.c:5395 +msgid "must be superuser to run a backup" +msgstr "只有管理者能執行備份" + +# utils/misc/guc.c:1423 +#: access/transam/xlog.c:5273 +msgid "WAL archiving is not active" +msgstr "WAL備份並未開啟" + +#: access/transam/xlog.c:5274 +msgid "" +"archive_command must be defined before online backups can be made safely." +msgstr "" + +# access/transam/xlog.c:5297 +#: access/transam/xlog.c:5329 +msgid "a backup is already in progress" +msgstr "已有備份動作正在進行" + +# access/transam/xlog.c:5298 +#: access/transam/xlog.c:5330 +#, c-format +msgid "" +"If you're sure there is no backup in progress, remove file \"%s\" and try " +"again." +msgstr "如果您確定沒有備份動作正在進行，移除檔案 \"%s\" 並重試。" + +# access/transam/xlog.c:5319 access/transam/xlog.c:5439 +#: access/transam/xlog.c:5351 access/transam/xlog.c:5471 +#, c-format +msgid "could not write file \"%s\": %m" +msgstr "無法寫入檔案 \"%s\": %m" + +# access/transam/xlog.c:5401 +#: access/transam/xlog.c:5433 +msgid "a backup is not in progress" +msgstr "有一個備份動作不在運行" + +# access/transam/xlog.c:5414 access/transam/xlog.c:5535 +# access/transam/xlog.c:5541 access/transam/xlog.c:5572 +# access/transam/xlog.c:5578 +#: access/transam/xlog.c:5446 access/transam/xlog.c:5567 +#: access/transam/xlog.c:5573 access/transam/xlog.c:5604 +#: access/transam/xlog.c:5610 +#, c-format +msgid "invalid data in file \"%s\"" +msgstr "歷史記錄檔 \"%s\" 中有無效資料" + +# access/transam/slru.c:452 +#: access/transam/slru.c:452 +#, c-format +msgid "file \"%s\" doesn't exist, reading as zeroes" +msgstr "檔案\"%s\"不存在，當成空檔案讀取" + +# access/transam/slru.c:637 access/transam/slru.c:644 +# access/transam/slru.c:651 access/transam/slru.c:658 +# access/transam/slru.c:665 access/transam/slru.c:672 +# access/transam/slru.c:679 +#: access/transam/slru.c:637 access/transam/slru.c:644 +#: access/transam/slru.c:651 access/transam/slru.c:658 +#: access/transam/slru.c:665 access/transam/slru.c:672 +#: access/transam/slru.c:679 +#, c-format +msgid "could not access status of transaction %u" +msgstr "無法存取交易 %u 的狀態" + +# access/transam/slru.c:652 +#: access/transam/slru.c:652 +#, c-format +msgid "could not seek in file \"%s\" to offset %u: %m" +msgstr "無法移動至檔案\"%s\"的偏移位置 %u：%m" + +# access/transam/slru.c:659 +#: access/transam/slru.c:659 +#, c-format +msgid "could not read from file \"%s\" at offset %u: %m" +msgstr "無法讀取檔案\"%s\"於偏移位置 %u：%m" + +# access/transam/slru.c:666 +#: access/transam/slru.c:666 +#, c-format +msgid "could not write to file \"%s\" at offset %u: %m" +msgstr "無法寫入檔案\"%s\"於偏移位置 %u：%m" + +# access/transam/slru.c:862 +#: access/transam/slru.c:862 +#, c-format +msgid "could not truncate directory \"%s\": apparent wraparound" +msgstr "" + +# access/transam/slru.c:930 commands/tablespace.c:529 +# commands/tablespace.c:694 utils/adt/misc.c:174 +#: ../port/copydir.c:55 access/transam/slru.c:930 commands/tablespace.c:525 +#: commands/tablespace.c:692 utils/adt/misc.c:174 +#, c-format +msgid "could not open directory \"%s\": %m" +msgstr "無法開啟目錄\"%s\"：%m" + +# access/transam/slru.c:948 +#: access/transam/slru.c:948 +#, c-format +msgid "removing file \"%s\"" +msgstr "刪除檔案\"%s\"" + +# access/transam/slru.c:967 commands/tablespace.c:577 +# commands/tablespace.c:721 +#: access/transam/slru.c:967 commands/tablespace.c:573 +#: commands/tablespace.c:719 +#, c-format +msgid "could not read directory \"%s\": %m" +msgstr "無法讀取目錄\"%s\"：%m" + +# access/transam/xact.c:510 +#: access/transam/xact.c:510 +msgid "cannot have more than 2^32-1 commands in a transaction" +msgstr "每筆交易不能超過2^32-1個命令" + +# translator: %s represents an SQL statement name +# access/transam/xact.c:2173 +#. translator: %s represents an SQL statement name +#: access/transam/xact.c:2178 +#, c-format +msgid "%s cannot run inside a transaction block" +msgstr "%s 不能在交易中執行" + +# translator: %s represents an SQL statement name +# access/transam/xact.c:2183 +#. translator: %s represents an SQL statement name +#: access/transam/xact.c:2188 +#, c-format +msgid "%s cannot run inside a subtransaction" +msgstr "%s 不能在子交易中執行" + +# translator: %s represents an SQL statement name +# access/transam/xact.c:2195 +#. translator: %s represents an SQL statement name +#: access/transam/xact.c:2200 +#, c-format +msgid "%s cannot be executed from a function" +msgstr "%s 不能在函式中執行" + +# translator: %s represents an SQL statement name +# access/transam/xact.c:2246 +#. translator: %s represents an SQL statement name +#: access/transam/xact.c:2251 +#, c-format +msgid "%s may only be used in transaction blocks" +msgstr "%s 只能在交易中被使用" + +# access/transam/xact.c:2429 +#: access/transam/xact.c:2434 +msgid "there is already a transaction in progress" +msgstr "已經有交易在執行中" + +# access/transam/xact.c:2544 access/transam/xact.c:2635 +#: access/transam/xact.c:2549 access/transam/xact.c:2640 +msgid "there is no transaction in progress" +msgstr "沒有執行中的交易" + +# access/transam/xact.c:2727 access/transam/xact.c:2776 +# access/transam/xact.c:2782 access/transam/xact.c:2826 +# access/transam/xact.c:2873 access/transam/xact.c:2879 +#: access/transam/xact.c:2732 access/transam/xact.c:2781 +#: access/transam/xact.c:2787 access/transam/xact.c:2831 +#: access/transam/xact.c:2878 access/transam/xact.c:2884 +msgid "no such savepoint" +msgstr "沒有這個savepoint" + +# access/transam/xact.c:3517 +#: access/transam/xact.c:3522 +msgid "cannot have more than 2^32-1 subtransactions in a transaction" +msgstr "每筆交易不能擁有超過2^32-1個子交易" + +# bootstrap/bootstrap.c:299 postmaster/postmaster.c:495 tcop/postgres.c:2502 +#: bootstrap/bootstrap.c:299 postmaster/postmaster.c:549 tcop/postgres.c:2533 +#, c-format +msgid "--%s requires a value" +msgstr "--%s 需要一個值" + +# bootstrap/bootstrap.c:304 postmaster/postmaster.c:500 tcop/postgres.c:2507 +#: bootstrap/bootstrap.c:304 postmaster/postmaster.c:554 tcop/postgres.c:2538 +#, c-format +msgid "-c %s requires a value" +msgstr "-c %s 需要一個值" + +# bootstrap/bootstrap.c:481 +#: bootstrap/bootstrap.c:481 +msgid "" +"Usage:\n" +" postgres -boot [OPTION]... DBNAME\n" +" -c NAME=VALUE set run-time parameter\n" +" -d 1-5 debug level\n" +" -D datadir data directory\n" +" -F turn off fsync\n" +" -o file send debug output to file\n" +" -x num internal use\n" +msgstr "" +"使用方法：\n" +" postgres -boot [OPTION]... DBNAME\n" +" -c NAME=VALUE 設定執行時期參數\n" +" -d 1-5 除錯等級\n" +" -D datadir 資料目錄\n" +" -F 關閉fsync\n" +" -o file 將除錯訊息寫入檔案\n" +" -x num 內部使用\n" + +# catalog/dependency.c:152 +#: catalog/dependency.c:152 +#, c-format +msgid "cannot drop %s because other objects depend on it" +msgstr "無法刪除 %s，因為有其它物件依存於它" + +# catalog/dependency.c:154 +#: catalog/dependency.c:154 +msgid "Use DROP ... CASCADE to drop the dependent objects too." +msgstr "使用DROP ... CASCADE刪除依存物件。" + +# catalog/dependency.c:212 +#: catalog/dependency.c:212 +#, c-format +msgid "failed to drop all objects depending on %s" +msgstr "刪除所有依存於 %s 的物件失敗" + +# catalog/dependency.c:312 catalog/dependency.c:717 +#: catalog/dependency.c:312 catalog/dependency.c:717 +#, c-format +msgid "cannot drop %s because it is required by the database system" +msgstr "無法刪除 %s，因為資料庫系統需要它" + +# catalog/dependency.c:451 +#: catalog/dependency.c:451 +#, c-format +msgid "cannot drop %s because %s requires it" +msgstr "無法刪除 %s，因為 %s 需要它" + +# catalog/dependency.c:453 +#: catalog/dependency.c:453 +#, c-format +msgid "You may drop %s instead." +msgstr "你可以改為刪除 %s。" + +# catalog/dependency.c:521 catalog/dependency.c:674 catalog/dependency.c:702 +#: catalog/dependency.c:521 catalog/dependency.c:674 catalog/dependency.c:702 +#, c-format +msgid "drop auto-cascades to %s" +msgstr "" + +# catalog/dependency.c:526 catalog/dependency.c:679 +#: catalog/dependency.c:526 catalog/dependency.c:679 +#, c-format +msgid "%s depends on %s" +msgstr "%s 依存於 %s" + +# catalog/dependency.c:533 catalog/dependency.c:686 +#: catalog/dependency.c:533 catalog/dependency.c:686 +#, c-format +msgid "drop cascades to %s" +msgstr "" + +# catalog/dependency.c:1427 +#: catalog/dependency.c:1427 +#, c-format +msgid " column %s" +msgstr "" + +# catalog/dependency.c:1433 +#: catalog/dependency.c:1433 +#, c-format +msgid "function %s" +msgstr "函式 %s" + +# catalog/dependency.c:1438 +#: catalog/dependency.c:1438 +#, c-format +msgid "type %s" +msgstr "型別 %s" + +# catalog/dependency.c:1468 +#: catalog/dependency.c:1468 +#, c-format +msgid "cast from %s to %s" +msgstr "" + +# catalog/dependency.c:1505 +#: catalog/dependency.c:1505 +#, c-format +msgid "constraint %s on " +msgstr "" + +# catalog/dependency.c:1511 +#: catalog/dependency.c:1511 +#, c-format +msgid "constraint %s" +msgstr "" + +# catalog/dependency.c:1530 +#: catalog/dependency.c:1530 +#, c-format +msgid "conversion %s" +msgstr "" + +# catalog/dependency.c:1567 +#: catalog/dependency.c:1567 +#, c-format +msgid "default for %s" +msgstr "" + +# catalog/dependency.c:1585 +#: catalog/dependency.c:1585 +#, c-format +msgid "language %s" +msgstr "語言 %s" + +# catalog/dependency.c:1592 +#: catalog/dependency.c:1592 +#, c-format +msgid "operator %s" +msgstr "" + +# catalog/dependency.c:1626 +#: catalog/dependency.c:1626 +#, c-format +msgid "operator class %s for access method %s" +msgstr "" + +# catalog/dependency.c:1662 +#: catalog/dependency.c:1662 +#, c-format +msgid "rule %s on " +msgstr "" + +# catalog/dependency.c:1697 +#: catalog/dependency.c:1697 +#, c-format +msgid "trigger %s on " +msgstr "" + +# catalog/dependency.c:1714 +#: catalog/dependency.c:1714 +#, c-format +msgid "schema %s" +msgstr "" + +# catalog/dependency.c:1758 +#: catalog/dependency.c:1758 +#, c-format +msgid "table %s" +msgstr "資料表 %s" + +# catalog/dependency.c:1762 +#: catalog/dependency.c:1762 +#, c-format +msgid "index %s" +msgstr "索引 %s" + +# catalog/dependency.c:1766 +#: catalog/dependency.c:1766 +#, c-format +msgid "special system relation %s" +msgstr "特別系統relation %s" + +# catalog/dependency.c:1770 +#: catalog/dependency.c:1770 +#, c-format +msgid "sequence %s" +msgstr "" + +# catalog/dependency.c:1774 +#: catalog/dependency.c:1774 +#, c-format +msgid "uncataloged table %s" +msgstr "" + +# catalog/dependency.c:1778 +#: catalog/dependency.c:1778 +#, c-format +msgid "toast table %s" +msgstr "" + +# catalog/dependency.c:1782 +#: catalog/dependency.c:1782 +#, c-format +msgid "view %s" +msgstr "" + +# catalog/dependency.c:1786 +#: catalog/dependency.c:1786 +#, c-format +msgid "composite type %s" +msgstr "複合型別 %s" + +# catalog/dependency.c:1791 +#: catalog/dependency.c:1791 +#, c-format +msgid "relation %s" +msgstr "" + +# catalog/aclchk.c:158 +#: catalog/aclchk.c:158 +msgid "grant options can only be granted to individual users" +msgstr "" + +# catalog/aclchk.c:246 +#: catalog/aclchk.c:246 +#, c-format +msgid "invalid privilege type %s for table" +msgstr "無效的 table 權限型別 %s" + +# catalog/aclchk.c:334 catalog/aclchk.c:492 catalog/aclchk.c:646 +# catalog/aclchk.c:809 catalog/aclchk.c:962 catalog/aclchk.c:1121 +#: catalog/aclchk.c:334 catalog/aclchk.c:492 catalog/aclchk.c:646 +#: catalog/aclchk.c:809 catalog/aclchk.c:962 catalog/aclchk.c:1121 +msgid "no privileges were granted" +msgstr "未被賦予任何權限" + +# catalog/aclchk.c:338 catalog/aclchk.c:496 catalog/aclchk.c:650 +# catalog/aclchk.c:813 catalog/aclchk.c:966 catalog/aclchk.c:1125 +#: catalog/aclchk.c:338 catalog/aclchk.c:496 catalog/aclchk.c:650 +#: catalog/aclchk.c:813 catalog/aclchk.c:966 catalog/aclchk.c:1125 +msgid "not all privileges were granted" +msgstr "只能賦予部份權限" + +# catalog/aclchk.c:345 catalog/aclchk.c:503 catalog/aclchk.c:657 +# catalog/aclchk.c:820 catalog/aclchk.c:973 catalog/aclchk.c:1132 +#: catalog/aclchk.c:345 catalog/aclchk.c:503 catalog/aclchk.c:657 +#: catalog/aclchk.c:820 catalog/aclchk.c:973 catalog/aclchk.c:1132 +msgid "no privileges could be revoked" +msgstr "無法取消任何權限" + +# catalog/aclchk.c:349 catalog/aclchk.c:507 catalog/aclchk.c:661 +# catalog/aclchk.c:824 catalog/aclchk.c:977 catalog/aclchk.c:1136 +#: catalog/aclchk.c:349 catalog/aclchk.c:507 catalog/aclchk.c:661 +#: catalog/aclchk.c:824 catalog/aclchk.c:977 catalog/aclchk.c:1136 +msgid "not all privileges could be revoked" +msgstr "只能取消部份權限" + +# catalog/aclchk.c:414 +#: catalog/aclchk.c:414 +#, c-format +msgid "invalid privilege type %s for database" +msgstr "無效的 database 權限型別 %s" + +# catalog/aclchk.c:451 commands/comment.c:458 commands/dbcommands.c:521 +# commands/dbcommands.c:645 commands/dbcommands.c:740 +# commands/dbcommands.c:814 utils/adt/acl.c:1661 utils/init/postinit.c:264 +# utils/init/postinit.c:276 +#: catalog/aclchk.c:451 commands/comment.c:458 commands/dbcommands.c:550 +#: commands/dbcommands.c:679 commands/dbcommands.c:779 +#: commands/dbcommands.c:866 utils/adt/acl.c:1661 utils/init/postinit.c:271 +#: utils/init/postinit.c:283 +#, c-format +msgid "database \"%s\" does not exist" +msgstr "資料庫\"%s\"不存在" + +# catalog/aclchk.c:572 +#: catalog/aclchk.c:572 +#, c-format +msgid "invalid privilege type %s for function" +msgstr "無效的 function 權限型別 %s" + +# catalog/aclchk.c:726 +#: catalog/aclchk.c:726 +#, c-format +msgid "invalid privilege type %s for language" +msgstr "無效的 language 權限型別 %s" + +# catalog/aclchk.c:758 commands/comment.c:1001 commands/functioncmds.c:451 +# commands/proclang.c:202 commands/proclang.c:257 utils/adt/acl.c:2079 +#: catalog/aclchk.c:758 commands/comment.c:1001 commands/functioncmds.c:451 +#: commands/proclang.c:202 commands/proclang.c:257 utils/adt/acl.c:2079 +#, c-format +msgid "language \"%s\" does not exist" +msgstr "語言\"%s\"不存在" + +# catalog/aclchk.c:764 +#: catalog/aclchk.c:764 +#, c-format +msgid "language \"%s\" is not trusted" +msgstr "語言\"%s\"不受信任" + +# catalog/aclchk.c:765 +#: catalog/aclchk.c:765 +msgid "Only superusers may use untrusted languages." +msgstr "" + +# catalog/aclchk.c:889 +#: catalog/aclchk.c:889 +#, c-format +msgid "invalid privilege type %s for schema" +msgstr "無效的 schema 權限型別 %s" + +# catalog/aclchk.c:921 catalog/namespace.c:255 catalog/namespace.c:1229 +# catalog/namespace.c:1267 catalog/namespace.c:1866 commands/comment.c:509 +# commands/schemacmds.c:210 commands/schemacmds.c:272 +# commands/schemacmds.c:327 utils/adt/acl.c:2283 +#: catalog/aclchk.c:921 catalog/namespace.c:255 catalog/namespace.c:1229 +#: catalog/namespace.c:1267 catalog/namespace.c:1866 commands/comment.c:509 +#: commands/schemacmds.c:181 commands/schemacmds.c:243 +#: commands/schemacmds.c:298 utils/adt/acl.c:2283 +#, c-format +msgid "schema \"%s\" does not exist" +msgstr "schema \"%s\"不存在" + +# catalog/aclchk.c:1043 +#: catalog/aclchk.c:1043 +#, c-format +msgid "invalid privilege type %s for tablespace" +msgstr "無效的 tablespace 權限型別 %s" + +# catalog/aclchk.c:1080 commands/dbcommands.c:276 commands/indexcmds.c:169 +# commands/schemacmds.c:117 commands/tablecmds.c:327 +# commands/tablecmds.c:5384 commands/tablespace.c:429 +# commands/tablespace.c:823 commands/tablespace.c:890 utils/adt/acl.c:2489 +#: catalog/aclchk.c:1080 commands/dbcommands.c:277 commands/indexcmds.c:171 +#: commands/tablecmds.c:324 commands/tablecmds.c:5435 +#: commands/tablespace.c:425 commands/tablespace.c:750 +#: commands/tablespace.c:817 commands/tablespace.c:896 utils/adt/acl.c:2489 +#, c-format +msgid "tablespace \"%s\" does not exist" +msgstr "tablespace \"%s\"不存在" + +# catalog/aclchk.c:1229 commands/user.c:1535 commands/user.c:1772 +# commands/user.c:1807 libpq/pqcomm.c:499 +#: catalog/aclchk.c:1229 commands/user.c:1535 commands/user.c:1772 +#: commands/user.c:1807 libpq/pqcomm.c:499 +#, c-format +msgid "group \"%s\" does not exist" +msgstr "群組\"%s\"不存在" + +# catalog/aclchk.c:1264 +#: catalog/aclchk.c:1264 +#, c-format +msgid "permission denied for relation %s" +msgstr "存取relation %s被拒" + +# catalog/aclchk.c:1266 +#: catalog/aclchk.c:1266 +#, c-format +msgid "permission denied for database %s" +msgstr "存取資料庫%s被拒" + +# catalog/aclchk.c:1268 +#: catalog/aclchk.c:1268 +#, c-format +msgid "permission denied for function %s" +msgstr "存取函式%s被拒" + +# catalog/aclchk.c:1270 +#: catalog/aclchk.c:1270 +#, c-format +msgid "permission denied for operator %s" +msgstr "存取operator %s被拒" + +# catalog/aclchk.c:1272 +#: catalog/aclchk.c:1272 +#, c-format +msgid "permission denied for type %s" +msgstr "存取資料型別%s被拒" + +# catalog/aclchk.c:1274 +#: catalog/aclchk.c:1274 +#, c-format +msgid "permission denied for language %s" +msgstr "存取語言%s被拒" + +# catalog/aclchk.c:1276 +#: catalog/aclchk.c:1276 +#, c-format +msgid "permission denied for schema %s" +msgstr "存取schema %s被拒" + +# catalog/aclchk.c:1278 +#: catalog/aclchk.c:1278 +#, c-format +msgid "permission denied for operator class %s" +msgstr "存取operator class %s被拒" + +# catalog/aclchk.c:1280 +#: catalog/aclchk.c:1280 +#, c-format +msgid "permission denied for conversion %s" +msgstr "存取conversion %s被拒" + +# catalog/aclchk.c:1282 +#: catalog/aclchk.c:1282 +#, c-format +msgid "permission denied for tablespace %s" +msgstr "存取tablespace %s被拒" + +# catalog/aclchk.c:1288 +#: catalog/aclchk.c:1288 +#, c-format +msgid "must be owner of relation %s" +msgstr "必須是relation %s的擁有者" + +# catalog/aclchk.c:1290 +#: catalog/aclchk.c:1290 +#, c-format +msgid "must be owner of database %s" +msgstr "必須是資料庫%s的擁有者" + +# catalog/aclchk.c:1292 +#: catalog/aclchk.c:1292 +#, c-format +msgid "must be owner of function %s" +msgstr "必須是函式%s的擁有者" + +# catalog/aclchk.c:1294 +#: catalog/aclchk.c:1294 +#, c-format +msgid "must be owner of operator %s" +msgstr "必須是operator %s的擁有者" + +# catalog/aclchk.c:1296 +#: catalog/aclchk.c:1296 +#, c-format +msgid "must be owner of type %s" +msgstr "必須是型別%s的擁有者" + +# catalog/aclchk.c:1298 +#: catalog/aclchk.c:1298 +#, c-format +msgid "must be owner of language %s" +msgstr "必須是語言%s的擁有者" + +# catalog/aclchk.c:1300 +#: catalog/aclchk.c:1300 +#, c-format +msgid "must be owner of schema %s" +msgstr "必須是schema %s的擁有者" + +# catalog/aclchk.c:1302 +#: catalog/aclchk.c:1302 +#, c-format +msgid "must be owner of operator class %s" +msgstr "必須是operator class %s的擁有者" + +# catalog/aclchk.c:1304 +#: catalog/aclchk.c:1304 +#, c-format +msgid "must be owner of conversion %s" +msgstr "必須是conversion %s的擁有者" + +# catalog/aclchk.c:1306 +#: catalog/aclchk.c:1306 +#, c-format +msgid "must be owner of tablespace %s" +msgstr "必須是tablespace %s的擁有者" + +# catalog/aclchk.c:1369 +#: catalog/aclchk.c:1369 +#, c-format +msgid "user with ID %u does not exist" +msgstr "ID為 %u 的使用者不存在" + +# catalog/aclchk.c:1386 catalog/aclchk.c:1889 +#: catalog/aclchk.c:1386 catalog/aclchk.c:1889 +#, c-format +msgid "relation with OID %u does not exist" +msgstr "OID為 %u 的relation不存在" + +# catalog/aclchk.c:1490 catalog/aclchk.c:2107 +#: catalog/aclchk.c:1490 catalog/aclchk.c:2107 +#, c-format +msgid "database with OID %u does not exist" +msgstr "OID為 %u 的資料庫不存在" + +# catalog/aclchk.c:1548 catalog/aclchk.c:1973 tcop/fastpath.c:230 +#: catalog/aclchk.c:1548 catalog/aclchk.c:1973 tcop/fastpath.c:230 +#, c-format +msgid "function with OID %u does not exist" +msgstr "OID為 %u 的函式不存在" + +# catalog/aclchk.c:1604 +#: catalog/aclchk.c:1604 +#, c-format +msgid "language with OID %u does not exist" +msgstr "OID為 %u 的語言不存在" + +# catalog/aclchk.c:1689 catalog/aclchk.c:2001 +#: catalog/aclchk.c:1689 catalog/aclchk.c:2001 +#, c-format +msgid "schema with OID %u does not exist" +msgstr "OID為 %u 的schema不存在" + +# catalog/aclchk.c:1761 catalog/aclchk.c:2039 +#: catalog/aclchk.c:1761 catalog/aclchk.c:2039 +#, c-format +msgid "tablespace with OID %u does not exist" +msgstr "OID為 %u 的tablespace不存在" + +# catalog/aclchk.c:1917 +#: catalog/aclchk.c:1917 +#, c-format +msgid "type with OID %u does not exist" +msgstr "OID為 %u 的型別不存在" + +# catalog/aclchk.c:1945 +#: catalog/aclchk.c:1945 +#, c-format +msgid "operator with OID %u does not exist" +msgstr "OID為 %u 的operator不存在" + +# catalog/aclchk.c:2068 +#: catalog/aclchk.c:2068 +#, c-format +msgid "operator class with OID %u does not exist" +msgstr "OID為 %u 的operator class不存在" + +# catalog/aclchk.c:2136 +#: catalog/aclchk.c:2136 +#, c-format +msgid "conversion with OID %u does not exist" +msgstr "OID為 %u 的conversion不存在" + +# catalog/pg_aggregate.c:80 +#: catalog/pg_aggregate.c:80 +msgid "cannot determine transition data type" +msgstr "無法判斷交易資料型別" + +# catalog/pg_aggregate.c:81 +#: catalog/pg_aggregate.c:81 +msgid "" +"An aggregate using \"anyarray\" or \"anyelement\" as transition type must " +"have one of them as its base type." +msgstr "" + +# catalog/pg_aggregate.c:110 +#: catalog/pg_aggregate.c:110 +#, c-format +msgid "return type of transition function %s is not %s" +msgstr "" + +# catalog/pg_aggregate.c:132 +#: catalog/pg_aggregate.c:132 +msgid "" +"must not omit initial value when transition function is strict and " +"transition type is not compatible with input type" +msgstr "" + +# catalog/pg_aggregate.c:165 catalog/pg_proc.c:124 executor/functions.c:1082 +#: catalog/pg_aggregate.c:165 catalog/pg_proc.c:124 executor/functions.c:1082 +msgid "cannot determine result data type" +msgstr "無法識別結果資料型別" + +# catalog/pg_aggregate.c:166 +#: catalog/pg_aggregate.c:166 +msgid "" +"An aggregate returning \"anyarray\" or \"anyelement\" must have one of them " +"as its base type." +msgstr "" + +# catalog/pg_aggregate.c:281 commands/typecmds.c:919 commands/typecmds.c:989 +# commands/typecmds.c:1021 commands/typecmds.c:1053 commands/typecmds.c:1077 +# parser/parse_func.c:203 parser/parse_func.c:1364 +#: catalog/pg_aggregate.c:281 commands/typecmds.c:919 commands/typecmds.c:989 +#: commands/typecmds.c:1021 commands/typecmds.c:1053 commands/typecmds.c:1077 +#: parser/parse_func.c:203 parser/parse_func.c:1364 +#, c-format +msgid "function %s does not exist" +msgstr "函式 %s 不存在" + +# catalog/pg_aggregate.c:286 +#: catalog/pg_aggregate.c:286 +#, c-format +msgid "function %s returns a set" +msgstr "函式%s傳回一個set" + +# catalog/pg_aggregate.c:317 catalog/pg_aggregate.c:326 +#: catalog/pg_aggregate.c:317 catalog/pg_aggregate.c:326 +#, c-format +msgid "function %s requires run-time type coercion" +msgstr "" + +# catalog/heap.c:221 +#: catalog/heap.c:221 +#, c-format +msgid "permission denied to create \"%s.%s\"" +msgstr "建立\"%s.%s\"被拒絕" + +# catalog/heap.c:223 +#: catalog/heap.c:223 +msgid "System catalog modifications are currently disallowed." +msgstr "目前不允許修改系統catalog。" + +# catalog/heap.c:382 commands/tablecmds.c:2897 +#: catalog/heap.c:382 commands/tablecmds.c:697 commands/tablecmds.c:1007 +#: commands/tablecmds.c:2927 +#, c-format +msgid "tables can have at most %d columns" +msgstr "資料表最多可以有 %d 個欄位" + +# catalog/heap.c:399 +#: catalog/heap.c:399 +#, c-format +msgid "column name \"%s\" conflicts with a system column name" +msgstr "欄位名稱\"%s\"與系統欄位名稱衝突" + +# catalog/heap.c:415 +#: catalog/heap.c:415 +#, c-format +msgid "column name \"%s\" is duplicated" +msgstr "欄位名稱\"%s\"重覆" + +# catalog/heap.c:452 +#: catalog/heap.c:452 +#, c-format +msgid "column \"%s\" has type \"unknown\"" +msgstr "欄位\"%s\"的資料型別是\"unknown\"" + +# catalog/heap.c:453 +#: catalog/heap.c:453 +msgid "Proceeding with relation creation anyway." +msgstr "" + +# catalog/heap.c:460 +#: catalog/heap.c:460 +#, c-format +msgid "column \"%s\" has pseudo-type %s" +msgstr "" + +# catalog/heap.c:747 catalog/index.c:527 commands/tablecmds.c:1471 +#: catalog/heap.c:747 catalog/index.c:527 commands/tablecmds.c:1501 +#, c-format +msgid "relation \"%s\" already exists" +msgstr "relation \"%s\"已經存在" + +# catalog/heap.c:1601 +#: catalog/heap.c:1601 +#, c-format +msgid "only table \"%s\" can be referenced in check constraint" +msgstr "只有資料表\"%s\"可以在check constraint中被參照" + +# catalog/heap.c:1610 commands/typecmds.c:1872 +#: catalog/heap.c:1610 commands/typecmds.c:1872 +msgid "cannot use subquery in check constraint" +msgstr "check constraint中不能使用子查詢" + +# catalog/heap.c:1614 +#: catalog/heap.c:1614 +msgid "cannot use aggregate function in check constraint" +msgstr "check constraint中不能使用aggregate function" + +# catalog/heap.c:1631 commands/tablecmds.c:3692 +#: catalog/heap.c:1631 commands/tablecmds.c:3722 +#, c-format +msgid "constraint \"%s\" for relation \"%s\" already exists" +msgstr "" + +# catalog/heap.c:1640 +#: catalog/heap.c:1640 +#, c-format +msgid "check constraint \"%s\" already exists" +msgstr "check constraint \"%s\"已經存在" + +# catalog/heap.c:1789 +#: catalog/heap.c:1789 +msgid "cannot use column references in default expression" +msgstr "預設值expression中不能使用欄位參照" + +# catalog/heap.c:1797 +#: catalog/heap.c:1797 +msgid "default expression must not return a set" +msgstr "預設值expression不能傳回一個set" + +# catalog/heap.c:1805 +#: catalog/heap.c:1805 +msgid "cannot use subquery in default expression" +msgstr "預設值expression中不能使用子查詢" + +# catalog/heap.c:1809 +#: catalog/heap.c:1809 +msgid "cannot use aggregate function in default expression" +msgstr "預設值expression中不能使用aggregate function" + +# catalog/heap.c:1827 rewrite/rewriteHandler.c:646 +#: catalog/heap.c:1827 rewrite/rewriteHandler.c:647 +#, c-format +msgid "column \"%s\" is of type %s but default expression is of type %s" +msgstr "欄位\"%s\"是型別 %s，但是預設值expression是型別 %s" + +# catalog/heap.c:1832 parser/analyze.c:2689 parser/parse_node.c:247 +# parser/parse_target.c:362 parser/parse_target.c:570 +# parser/parse_target.c:579 rewrite/rewriteHandler.c:651 +#: catalog/heap.c:1832 parser/analyze.c:2701 parser/parse_node.c:247 +#: parser/parse_target.c:362 parser/parse_target.c:572 +#: parser/parse_target.c:581 rewrite/rewriteHandler.c:652 +msgid "You will need to rewrite or cast the expression." +msgstr "" + +# catalog/heap.c:2093 +#: catalog/heap.c:2093 +msgid "cannot truncate a table referenced in a foreign key constraint" +msgstr "" + +# catalog/heap.c:2094 +#: catalog/heap.c:2094 +#, c-format +msgid "Table \"%s\" references \"%s\" via foreign key constraint \"%s\"." +msgstr "" + +# catalog/index.c:508 +#: catalog/index.c:508 +msgid "user-defined indexes on system catalog tables are not supported" +msgstr "" + +# catalog/index.c:522 +#: catalog/index.c:522 +msgid "shared indexes cannot be created after initdb" +msgstr "共享的索引無法在 initdb 後建立" + +# catalog/index.c:1685 +#: catalog/index.c:1679 +#, c-format +msgid "shared index \"%s\" can only be reindexed in stand-alone mode" +msgstr "共享的索引 \"%s\" 只能在 stand-alone 模式下重新索引" + +# catalog/namespace.c:173 catalog/namespace.c:228 +#: catalog/namespace.c:173 catalog/namespace.c:228 +#, c-format +msgid "cross-database references are not implemented: \"%s.%s.%s\"" +msgstr "跨資料庫參照尚未實做：\"%s.%s.%s\"" + +# catalog/namespace.c:195 +#: catalog/namespace.c:195 +#, c-format +msgid "relation \"%s.%s\" does not exist" +msgstr "relation \"%s.%s\"不存在" + +# catalog/namespace.c:200 utils/adt/regproc.c:837 +#: catalog/namespace.c:200 utils/adt/regproc.c:837 +#, c-format +msgid "relation \"%s\" does not exist" +msgstr "relation \"%s\"不存在" + +# catalog/namespace.c:239 +#: catalog/namespace.c:239 +msgid "temporary tables may not specify a schema name" +msgstr "暫存資料表不能指定schema名稱" + +# catalog/namespace.c:267 catalog/namespace.c:1278 +#: catalog/namespace.c:267 catalog/namespace.c:1278 +msgid "no schema has been selected to create in" +msgstr "" + +# catalog/namespace.c:1195 parser/parse_expr.c:1157 parser/parse_target.c:725 +#: catalog/namespace.c:1195 parser/parse_expr.c:1157 parser/parse_target.c:727 +#, c-format +msgid "cross-database references are not implemented: %s" +msgstr "" + +# catalog/namespace.c:1201 gram.y:2516 gram.y:7422 parser/parse_expr.c:1183 +# parser/parse_target.c:734 +#: catalog/namespace.c:1201 gram.y:2515 gram.y:7425 parser/parse_expr.c:1183 +#: parser/parse_target.c:736 +#, c-format +msgid "improper qualified name (too many dotted names): %s" +msgstr "" + +# catalog/namespace.c:1313 +#: catalog/namespace.c:1313 +#, c-format +msgid "improper relation name (too many dotted names): %s" +msgstr "" + +# catalog/namespace.c:1659 +#: catalog/namespace.c:1659 +#, c-format +msgid "permission denied to create temporary tables in database \"%s\"" +msgstr "" + +# catalog/pg_largeobject.c:107 commands/comment.c:1151 +# storage/large_object/inv_api.c:197 storage/large_object/inv_api.c:312 +#: catalog/pg_largeobject.c:107 commands/comment.c:1151 +#: storage/large_object/inv_api.c:197 storage/large_object/inv_api.c:312 +#, c-format +msgid "large object %u does not exist" +msgstr "large object %u不存在" + +# catalog/pg_conversion.c:66 +#: catalog/pg_conversion.c:66 +#, c-format +msgid "conversion \"%s\" already exists" +msgstr "conversion \"%s\"已經存在" + +# catalog/pg_conversion.c:79 +#: catalog/pg_conversion.c:79 +#, c-format +msgid "default conversion for %s to %s already exists" +msgstr "" + +# catalog/pg_conversion.c:307 commands/comment.c:958 +# commands/conversioncmds.c:109 commands/conversioncmds.c:133 +# commands/conversioncmds.c:192 +#: catalog/pg_conversion.c:307 commands/comment.c:958 +#: commands/conversioncmds.c:109 commands/conversioncmds.c:133 +#: commands/conversioncmds.c:192 +#, c-format +msgid "conversion \"%s\" does not exist" +msgstr "conversion \"%s\"不存在" + +# catalog/pg_namespace.c:51 commands/schemacmds.c:281 +#: catalog/pg_namespace.c:51 commands/schemacmds.c:252 +#, c-format +msgid "schema \"%s\" already exists" +msgstr "schema \"%s\"已經存在" + +# catalog/pg_operator.c:217 catalog/pg_operator.c:406 +#: catalog/pg_operator.c:217 catalog/pg_operator.c:406 +#, c-format +msgid "\"%s\" is not a valid operator name" +msgstr "\"%s\"不是合法的operator名稱" + +# catalog/pg_operator.c:412 +#: catalog/pg_operator.c:412 +msgid "at least one of leftarg or rightarg must be specified" +msgstr "" + +# catalog/pg_operator.c:420 +#: catalog/pg_operator.c:420 +msgid "only binary operators can have commutators" +msgstr "" + +# catalog/pg_operator.c:424 +#: catalog/pg_operator.c:424 +msgid "only binary operators can have join selectivity" +msgstr "" + +# catalog/pg_operator.c:428 +#: catalog/pg_operator.c:428 +msgid "only binary operators can hash" +msgstr "" + +# catalog/pg_operator.c:432 +#: catalog/pg_operator.c:432 +msgid "only binary operators can merge join" +msgstr "" + +# catalog/pg_operator.c:444 +#: catalog/pg_operator.c:444 +#, c-format +msgid "operator %s already exists" +msgstr "operator %s已經存在" + +# catalog/pg_operator.c:726 +#: catalog/pg_operator.c:726 +msgid "operator cannot be its own negator or sort operator" +msgstr "" + +# catalog/pg_proc.c:100 commands/functioncmds.c:154 parser/parse_func.c:1388 +#: catalog/pg_proc.c:100 commands/functioncmds.c:154 parser/parse_func.c:1388 +#, c-format +msgid "functions cannot have more than %d arguments" +msgstr "" + +# catalog/pg_proc.c:125 executor/functions.c:1083 +#: catalog/pg_proc.c:125 executor/functions.c:1083 +msgid "" +"A function returning \"anyarray\" or \"anyelement\" must have at least one " +"argument of either type." +msgstr "" + +# catalog/pg_proc.c:145 +#: catalog/pg_proc.c:145 +#, c-format +msgid "\"%s\" is already an attribute of type %s" +msgstr "" + +# catalog/pg_proc.c:200 +#: catalog/pg_proc.c:200 +#, c-format +msgid "function \"%s\" already exists with same argument types" +msgstr "" + +# catalog/pg_proc.c:214 +#: catalog/pg_proc.c:214 +msgid "cannot change return type of existing function" +msgstr "" + +# catalog/pg_proc.c:215 +#: catalog/pg_proc.c:215 +msgid "Use DROP FUNCTION first." +msgstr "請先執行DROP FUNCTION。" + +# catalog/pg_proc.c:223 +#: catalog/pg_proc.c:223 +#, c-format +msgid "function \"%s\" is an aggregate" +msgstr "函式\"%s\"是aggregate" + +# catalog/pg_proc.c:228 +#: catalog/pg_proc.c:228 +#, c-format +msgid "function \"%s\" is not an aggregate" +msgstr "函式\"%s\"不是aggregate" + +# catalog/pg_proc.c:387 +#: catalog/pg_proc.c:387 +#, c-format +msgid "there is no built-in function named \"%s\"" +msgstr "內建函式中沒有\"%s\"" + +# catalog/pg_proc.c:487 +#: catalog/pg_proc.c:487 +#, c-format +msgid "SQL functions cannot return type %s" +msgstr "SQL函式不能傳回型別%s" + +# catalog/pg_proc.c:503 +#: catalog/pg_proc.c:503 +#, c-format +msgid "SQL functions cannot have arguments of type %s" +msgstr "SQL函式不能有%s型別的引數" + +# catalog/pg_proc.c:574 executor/functions.c:803 +#: catalog/pg_proc.c:574 executor/functions.c:803 +#, c-format +msgid "SQL function \"%s\"" +msgstr "SQL函式\"%s\"" + +# catalog/pg_type.c:198 +#: catalog/pg_type.c:198 +#, c-format +msgid "invalid type internal size %d" +msgstr "無效的型別內部大小 %d" + +# catalog/pg_type.c:204 +#: catalog/pg_type.c:204 +#, c-format +msgid "internal size %d is invalid for passed-by-value type" +msgstr "" + +# catalog/pg_type.c:211 +#: catalog/pg_type.c:211 +msgid "fixed-size types must have storage PLAIN" +msgstr "" + +# catalog/pg_type.c:293 catalog/pg_type.c:525 +#: catalog/pg_type.c:293 catalog/pg_type.c:525 +#, c-format +msgid "type \"%s\" already exists" +msgstr "\"%s\"型別已經存在" + +# catalog/pg_type.c:517 commands/functioncmds.c:110 commands/tablecmds.c:4588 +# commands/typecmds.c:423 commands/typecmds.c:809 commands/typecmds.c:1167 +# commands/typecmds.c:1288 commands/typecmds.c:1400 commands/typecmds.c:1487 +# commands/typecmds.c:2072 parser/parse_func.c:1401 parser/parse_type.c:201 +# parser/parse_type.c:227 tcop/utility.c:97 utils/adt/regproc.c:1003 +#: catalog/pg_type.c:517 commands/functioncmds.c:110 commands/tablecmds.c:4632 +#: commands/typecmds.c:423 commands/typecmds.c:809 commands/typecmds.c:1167 +#: commands/typecmds.c:1288 commands/typecmds.c:1400 commands/typecmds.c:1487 +#: commands/typecmds.c:2072 parser/parse_func.c:1401 parser/parse_type.c:201 +#: parser/parse_type.c:227 tcop/utility.c:97 utils/adt/regproc.c:1003 +#, c-format +msgid "type \"%s\" does not exist" +msgstr "\"%s\"型別不存在" + +# commands/aggregatecmds.c:97 +#: commands/aggregatecmds.c:97 +#, c-format +msgid "aggregate attribute \"%s\" not recognized" +msgstr "" + +# commands/aggregatecmds.c:107 +#: commands/aggregatecmds.c:107 +msgid "aggregate basetype must be specified" +msgstr "必須指定aggregate basetype" + +# commands/aggregatecmds.c:111 +#: commands/aggregatecmds.c:111 +msgid "aggregate stype must be specified" +msgstr "必須指定aggregate stype" + +# commands/aggregatecmds.c:115 +#: commands/aggregatecmds.c:115 +msgid "aggregate sfunc must be specified" +msgstr "必須指定aggregate sfunc" + +# commands/aggregatecmds.c:138 +#: commands/aggregatecmds.c:138 +#, c-format +msgid "aggregate transition data type cannot be %s" +msgstr "" + +# commands/aggregatecmds.c:258 +#: commands/aggregatecmds.c:258 +#, c-format +msgid "function %s(*) already exists in schema \"%s\"" +msgstr "函式%s(*)已經存在於schema\"%s\"" + +# commands/aggregatecmds.c:264 commands/functioncmds.c:699 +#: commands/aggregatecmds.c:264 commands/functioncmds.c:699 +#, c-format +msgid "function %s already exists in schema \"%s\"" +msgstr "函式%s已經存在於schema\"%s\"" + +# commands/aggregatecmds.c:335 commands/conversioncmds.c:213 +# commands/dbcommands.c:838 commands/functioncmds.c:773 +# commands/opclasscmds.c:954 commands/operatorcmds.c:303 +# commands/schemacmds.c:348 commands/tablecmds.c:5177 +# commands/tablespace.c:912 commands/typecmds.c:2103 +#: commands/aggregatecmds.c:335 commands/conversioncmds.c:213 +#: commands/dbcommands.c:890 commands/functioncmds.c:773 +#: commands/opclasscmds.c:954 commands/operatorcmds.c:303 +#: commands/schemacmds.c:319 commands/tablecmds.c:5228 +#: commands/tablespace.c:839 commands/typecmds.c:2103 +msgid "must be superuser to change owner" +msgstr "只有管理者能修改擁有者" + +# commands/analyze.c:153 +#: commands/analyze.c:153 +#, c-format +msgid "skipping \"%s\" --- only table or database owner can analyze it" +msgstr "忽略\"%s\" -- 只有資料表或資料庫擁有者能進行分析" + +# commands/analyze.c:168 +#: commands/analyze.c:168 +#, c-format +msgid "" +"skipping \"%s\" --- cannot analyze indexes, views, or special system tables" +msgstr "忽略\"%s\" -- 無法分析索引、view或特殊系統資料表" + +# commands/analyze.c:198 +#: commands/analyze.c:198 +#, c-format +msgid "analyzing \"%s.%s\"" +msgstr "分析\"%s.%s\"" + +# commands/analyze.c:916 +#: commands/analyze.c:912 +#, c-format +msgid "" +"\"%s\": scanned %d of %u pages, containing %.0f live rows and %.0f dead " +"rows; %d rows in sample, %.0f estimated total rows" +msgstr "" + +# commands/cluster.c:133 +#: commands/cluster.c:133 +#, c-format +msgid "there is no previously clustered index for table \"%s\"" +msgstr "" + +# commands/cluster.c:147 commands/tablecmds.c:5326 +#: commands/cluster.c:147 commands/tablecmds.c:5377 +#, c-format +msgid "index \"%s\" for table \"%s\" does not exist" +msgstr "索引\"%s\"於資料表\"%s\"不存在" + +# commands/cluster.c:326 +#: commands/cluster.c:326 +#, c-format +msgid "\"%s\" is not an index for table \"%s\"" +msgstr "\"%s\"不是資料表\"%s\"的索引" + +# commands/cluster.c:339 +#: commands/cluster.c:339 +msgid "cannot cluster on partial index" +msgstr "無法cluter partial索引" + +# commands/cluster.c:357 +#: commands/cluster.c:357 +msgid "cannot cluster when index access method does not handle null values" +msgstr "" + +# commands/cluster.c:358 +#: commands/cluster.c:358 +#, c-format +msgid "You may be able to work around this by marking column \"%s\" NOT NULL." +msgstr "" + +# commands/cluster.c:370 +#: commands/cluster.c:370 +msgid "" +"cannot cluster on expressional index when index access method does not " +"handle null values" +msgstr "" + +# commands/cluster.c:384 +#: commands/cluster.c:384 +#, c-format +msgid "\"%s\" is a system catalog" +msgstr "\"%s\"是系統catalog" + +# commands/cluster.c:394 +#: commands/cluster.c:394 +msgid "cannot cluster temporary tables of other sessions" +msgstr "無法cluster其它sessions的暫存資疙表" + +# commands/conversioncmds.c:66 +#: commands/conversioncmds.c:66 +#, c-format +msgid "source encoding \"%s\" does not exist" +msgstr "來源編碼\"%s\"不存在" + +# commands/conversioncmds.c:73 +#: commands/conversioncmds.c:73 +#, c-format +msgid "destination encoding \"%s\" does not exist" +msgstr "目標編碼\"%s\"不存在" + +# commands/conversioncmds.c:151 +#: commands/conversioncmds.c:151 +#, c-format +msgid "conversion \"%s\" already exists in schema \"%s\"" +msgstr "conversion \"%s\"已經存在於schema \"%s\"" + +# commands/comment.c:334 commands/sequence.c:771 tcop/utility.c:83 +#: commands/comment.c:334 commands/sequence.c:767 tcop/utility.c:83 +#, c-format +msgid "\"%s\" is not a sequence" +msgstr "\"%s\"不是sequence" + +# commands/comment.c:341 commands/indexcmds.c:136 commands/indexcmds.c:937 +# commands/lockcmds.c:68 commands/tablecmds.c:541 commands/tablecmds.c:2594 +# commands/trigger.c:141 commands/trigger.c:546 tcop/utility.c:78 +#: commands/comment.c:341 commands/indexcmds.c:137 commands/indexcmds.c:951 +#: commands/lockcmds.c:68 commands/tablecmds.c:544 commands/tablecmds.c:2624 +#: commands/trigger.c:141 commands/trigger.c:546 tcop/utility.c:78 +#, c-format +msgid "\"%s\" is not a table" +msgstr "\"%s\"不是資料表" + +# commands/comment.c:348 commands/view.c:113 tcop/utility.c:88 +#: commands/comment.c:348 commands/view.c:113 tcop/utility.c:88 +#, c-format +msgid "\"%s\" is not a view" +msgstr "\"%s\"不是view" + +# commands/comment.c:404 commands/tablecmds.c:3070 commands/tablecmds.c:3163 +# commands/tablecmds.c:3215 commands/tablecmds.c:3311 +# commands/tablecmds.c:3372 commands/tablecmds.c:3438 +# commands/tablecmds.c:4564 commands/tablecmds.c:4701 +# parser/parse_relation.c:1647 parser/parse_relation.c:1705 +# parser/parse_relation.c:1919 parser/parse_type.c:94 +# utils/adt/ruleutils.c:1300 +#: commands/comment.c:404 commands/tablecmds.c:3100 commands/tablecmds.c:3193 +#: commands/tablecmds.c:3245 commands/tablecmds.c:3341 +#: commands/tablecmds.c:3402 commands/tablecmds.c:3468 +#: commands/tablecmds.c:4608 commands/tablecmds.c:4745 +#: parser/parse_relation.c:1641 parser/parse_relation.c:1700 +#: parser/parse_relation.c:1913 parser/parse_type.c:94 +#: utils/adt/ruleutils.c:1257 +#, c-format +msgid "column \"%s\" of relation \"%s\" does not exist" +msgstr "欄位\"%s\"於relation \"%s\"不存在" + +# commands/comment.c:435 +#: commands/comment.c:435 +msgid "database name may not be qualified" +msgstr "" + +# commands/comment.c:468 +#: commands/comment.c:468 +msgid "database comments may only be applied to the current database" +msgstr "" + +# commands/comment.c:500 commands/schemacmds.c:201 +#: commands/comment.c:500 commands/schemacmds.c:172 +msgid "schema name may not be qualified" +msgstr "" + +# commands/comment.c:582 +#: commands/comment.c:582 +#, c-format +msgid "rule \"%s\" does not exist" +msgstr "rule \"%s\"不存在" + +# commands/comment.c:590 +#: commands/comment.c:590 +#, c-format +msgid "there are multiple rules named \"%s\"" +msgstr "有多個rule名稱皆為\"%s\"" + +# commands/comment.c:591 +#: commands/comment.c:591 +msgid "Specify a relation name as well as a rule name." +msgstr "" + +# commands/comment.c:619 rewrite/rewriteDefine.c:582 +# rewrite/rewriteRemove.c:59 +#: commands/comment.c:619 rewrite/rewriteDefine.c:582 +#: rewrite/rewriteRemove.c:59 +#, c-format +msgid "rule \"%s\" for relation \"%s\" does not exist" +msgstr "" + +# commands/comment.c:836 commands/trigger.c:483 commands/trigger.c:697 +#: commands/comment.c:836 commands/trigger.c:483 commands/trigger.c:697 +#, c-format +msgid "trigger \"%s\" for table \"%s\" does not exist" +msgstr "" + +# commands/comment.c:916 +#: commands/comment.c:916 +#, c-format +msgid "table \"%s\" has multiple constraints named \"%s\"" +msgstr "" + +# commands/comment.c:928 +#: commands/comment.c:928 +#, c-format +msgid "constraint \"%s\" for table \"%s\" does not exist" +msgstr "" + +# commands/comment.c:992 +#: commands/comment.c:992 +msgid "language name may not be qualified" +msgstr "" + +# commands/comment.c:1007 +#: commands/comment.c:1007 +msgid "must be superuser to comment on procedural language" +msgstr "" + +# commands/comment.c:1048 commands/indexcmds.c:216 commands/opclasscmds.c:108 +# commands/opclasscmds.c:648 commands/opclasscmds.c:800 +# commands/opclasscmds.c:900 +#: commands/comment.c:1048 commands/indexcmds.c:230 commands/opclasscmds.c:108 +#: commands/opclasscmds.c:648 commands/opclasscmds.c:800 +#: commands/opclasscmds.c:900 +#, c-format +msgid "access method \"%s\" does not exist" +msgstr "存取方法\"%s\"不存在" + +# commands/comment.c:1077 commands/comment.c:1087 commands/indexcmds.c:600 +# commands/indexcmds.c:610 commands/opclasscmds.c:677 +# commands/opclasscmds.c:687 commands/opclasscmds.c:822 +# commands/opclasscmds.c:833 commands/opclasscmds.c:922 +# commands/opclasscmds.c:932 +#: commands/comment.c:1077 commands/comment.c:1087 commands/indexcmds.c:614 +#: commands/indexcmds.c:624 commands/opclasscmds.c:677 +#: commands/opclasscmds.c:687 commands/opclasscmds.c:822 +#: commands/opclasscmds.c:833 commands/opclasscmds.c:922 +#: commands/opclasscmds.c:932 +#, c-format +msgid "operator class \"%s\" does not exist for access method \"%s\"" +msgstr "" + +# commands/comment.c:1192 commands/functioncmds.c:908 +# commands/functioncmds.c:1156 +#: commands/comment.c:1192 commands/functioncmds.c:908 +#: commands/functioncmds.c:1156 +#, c-format +msgid "source data type %s does not exist" +msgstr "來源資料型別 %s 不存在" + +# commands/comment.c:1199 commands/functioncmds.c:915 +# commands/functioncmds.c:1163 +#: commands/comment.c:1199 commands/functioncmds.c:915 +#: commands/functioncmds.c:1163 +#, c-format +msgid "target data type %s does not exist" +msgstr "目標資料型別 %s 不存在" + +# commands/comment.c:1209 commands/functioncmds.c:1173 +#: commands/comment.c:1209 commands/functioncmds.c:1173 +#, c-format +msgid "cast from type %s to type %s does not exist" +msgstr "" + +# commands/comment.c:1221 commands/functioncmds.c:948 +# commands/functioncmds.c:1182 +#: commands/comment.c:1221 commands/functioncmds.c:948 +#: commands/functioncmds.c:1182 +#, c-format +msgid "must be owner of type %s or type %s" +msgstr "必須是型別 %s 或型別 %s 的擁有者" + +# commands/copy.c:720 commands/copy.c:728 commands/copy.c:736 +# commands/copy.c:744 commands/copy.c:752 commands/copy.c:760 +# commands/copy.c:768 commands/copy.c:776 commands/copy.c:784 +# commands/dbcommands.c:107 commands/dbcommands.c:115 +# commands/dbcommands.c:123 commands/dbcommands.c:131 +# commands/functioncmds.c:228 commands/functioncmds.c:236 +# commands/functioncmds.c:244 commands/functioncmds.c:252 +# commands/functioncmds.c:260 commands/sequence.c:903 commands/sequence.c:916 +# commands/sequence.c:924 commands/sequence.c:932 commands/sequence.c:940 +# commands/sequence.c:948 commands/user.c:576 commands/user.c:588 +# commands/user.c:596 commands/user.c:604 commands/user.c:612 +# commands/user.c:620 commands/user.c:826 commands/user.c:838 +# commands/user.c:846 commands/user.c:854 commands/user.c:1356 +# commands/user.c:1364 +#: commands/copy.c:720 commands/copy.c:728 commands/copy.c:736 +#: commands/copy.c:744 commands/copy.c:752 commands/copy.c:760 +#: commands/copy.c:768 commands/copy.c:776 commands/copy.c:784 +#: commands/dbcommands.c:108 commands/dbcommands.c:116 +#: commands/dbcommands.c:124 commands/dbcommands.c:132 +#: commands/functioncmds.c:228 commands/functioncmds.c:236 +#: commands/functioncmds.c:244 commands/functioncmds.c:252 +#: commands/functioncmds.c:260 commands/sequence.c:896 commands/sequence.c:909 +#: commands/sequence.c:917 commands/sequence.c:925 commands/sequence.c:933 +#: commands/sequence.c:941 commands/user.c:576 commands/user.c:588 +#: commands/user.c:596 commands/user.c:604 commands/user.c:612 +#: commands/user.c:620 commands/user.c:826 commands/user.c:838 +#: commands/user.c:846 commands/user.c:854 commands/user.c:1356 +#: commands/user.c:1364 +msgid "conflicting or redundant options" +msgstr "選項衝突或重覆" + +# commands/dbcommands.c:138 +#: commands/dbcommands.c:139 +msgid "LOCATION is not supported anymore" +msgstr "LOCATION已不被支援" + +# commands/dbcommands.c:139 +#: commands/dbcommands.c:140 +msgid "Consider using tablespaces instead." +msgstr "請考慮改用taplespace。" + +# commands/dbcommands.c:162 +#: commands/dbcommands.c:163 +#, c-format +msgid "%d is not a valid encoding code" +msgstr "%d 不是有效的編碼代碼" + +# commands/dbcommands.c:171 +#: commands/dbcommands.c:172 +#, c-format +msgid "%s is not a valid encoding name" +msgstr "%s 不是有效的編碼名稱" + +# commands/dbcommands.c:192 +#: commands/dbcommands.c:193 +msgid "permission denied to create database" +msgstr "建立資料庫被拒" + +# commands/dbcommands.c:201 +#: commands/dbcommands.c:202 +msgid "must be superuser to create database for another user" +msgstr "只有管理者能為其他使用者建立資料庫" + +# commands/dbcommands.c:215 commands/dbcommands.c:429 +# commands/dbcommands.c:678 +#: commands/dbcommands.c:216 commands/dbcommands.c:458 +#: commands/dbcommands.c:712 +#, c-format +msgid "database \"%s\" already exists" +msgstr "資料庫\"%s\"已經存在" + +# commands/dbcommands.c:228 +#: commands/dbcommands.c:229 +#, c-format +msgid "template database \"%s\" does not exist" +msgstr "範本資料庫\"%s\"不存在" + +# commands/dbcommands.c:239 +#: commands/dbcommands.c:240 +#, c-format +msgid "permission denied to copy database \"%s\"" +msgstr "複製資料庫\"%s\"被拒" + +# commands/dbcommands.c:252 +#: commands/dbcommands.c:253 +#, c-format +msgid "source database \"%s\" is being accessed by other users" +msgstr "來源資料庫\"%s\"正在被其他使用者存取" + +# commands/dbcommands.c:263 +#: commands/dbcommands.c:264 +#, c-format +msgid "invalid server encoding %d" +msgstr "不合法的伺服器編碼 %d" + +# commands/tablespace.c:227 +#: commands/dbcommands.c:310 +#, c-format +msgid "cannot assign new default tablespace \"%s\"" +msgstr "無法指定新的預設tablespace \"%s\"" + +#: commands/dbcommands.c:312 +#, c-format +msgid "" +"There is a conflict because database \"%s\" already has some tables in this " +"tablespace." +msgstr "" + +# commands/dbcommands.c:354 commands/dbcommands.c:375 +# commands/dbcommands.c:385 commands/dbcommands.c:1161 +# commands/dbcommands.c:1169 +#: commands/dbcommands.c:382 commands/dbcommands.c:404 +#: commands/dbcommands.c:414 commands/dbcommands.c:1226 +#: commands/dbcommands.c:1234 +msgid "could not initialize database directory" +msgstr "無法初始化資料庫目錄" + +# commands/dbcommands.c:355 +#: commands/dbcommands.c:383 +#, c-format +msgid "Directory \"%s\" already exists." +msgstr "目錄\"%s\"已經存在。" + +# commands/dbcommands.c:376 commands/dbcommands.c:1162 +#: commands/dbcommands.c:405 commands/dbcommands.c:1227 +#, c-format +msgid "Failing system command was: %s" +msgstr "失敗的系統命令是：%s" + +# commands/dbcommands.c:377 commands/dbcommands.c:1163 +#: commands/dbcommands.c:406 commands/dbcommands.c:1228 +msgid "Look in the postmaster's stderr log for more information." +msgstr "請檢查postmaster的stderr記錄取得更多資訊。" + +# commands/dbcommands.c:504 +#: commands/dbcommands.c:533 +msgid "cannot drop the currently open database" +msgstr "無法刪除目前正在開啟的資料庫" + +# commands/dbcommands.c:535 +#: commands/dbcommands.c:564 +msgid "cannot drop a template database" +msgstr "無法刪資範本資料庫" + +# commands/dbcommands.c:543 commands/dbcommands.c:665 +#: commands/dbcommands.c:572 commands/dbcommands.c:699 +#, c-format +msgid "database \"%s\" is being accessed by other users" +msgstr "資料庫\"%s\"正在被其他使用者存取" + +# commands/dbcommands.c:656 +#: commands/dbcommands.c:690 +msgid "current database may not be renamed" +msgstr "無法變更目前資料庫名稱" + +# commands/dbcommands.c:690 +#: commands/dbcommands.c:724 +msgid "permission denied to rename database" +msgstr "重新命名資料庫被拒" + +# commands/dbcommands.c:998 commands/dbcommands.c:1135 +# commands/dbcommands.c:1185 +#: commands/dbcommands.c:1063 commands/dbcommands.c:1200 +#: commands/dbcommands.c:1250 +#, c-format +msgid "could not remove database directory \"%s\"" +msgstr "無法刪除資料庫目錄\"%s\"" + +# commands/copy.c:204 commands/copy.c:216 commands/copy.c:249 +# commands/copy.c:259 +#: commands/copy.c:204 commands/copy.c:216 commands/copy.c:249 +#: commands/copy.c:259 +msgid "COPY BINARY is not supported to stdout or from stdin" +msgstr "" + +# commands/copy.c:312 +#: commands/copy.c:312 +#, c-format +msgid "could not write to COPY file: %m" +msgstr "無法寫入COPY檔：%m" + +# commands/copy.c:320 +#: commands/copy.c:320 +msgid "connection lost during COPY to stdout" +msgstr "COPY到標準輸出時失去連線" + +# commands/copy.c:403 commands/copy.c:421 commands/copy.c:425 +# commands/copy.c:486 commands/copy.c:535 tcop/fastpath.c:291 +# tcop/postgres.c:284 tcop/postgres.c:307 +#: commands/copy.c:403 commands/copy.c:421 commands/copy.c:425 +#: commands/copy.c:486 commands/copy.c:535 tcop/fastpath.c:291 +#: tcop/postgres.c:287 tcop/postgres.c:310 +msgid "unexpected EOF on client connection" +msgstr "用戶端連線出現非預期EOF" + +# commands/copy.c:437 +#: commands/copy.c:437 +#, c-format +msgid "COPY from stdin failed: %s" +msgstr "從標準輸入COPY失敗：%s" + +# commands/copy.c:453 +#: commands/copy.c:453 +#, c-format +msgid "unexpected message type 0x%02X during COPY from stdin" +msgstr "" + +# commands/copy.c:795 +#: commands/copy.c:795 +msgid "cannot specify DELIMITER in BINARY mode" +msgstr "不行在BINARY模式指定DELIMITER" + +# commands/copy.c:800 +#: commands/copy.c:800 +msgid "cannot specify CSV in BINARY mode" +msgstr "不行在BINARY模式指定CSV" + +# commands/copy.c:805 +#: commands/copy.c:805 +msgid "cannot specify NULL in BINARY mode" +msgstr "不行在BINARY模式指定NULL" + +# commands/copy.c:828 +#: commands/copy.c:828 +msgid "COPY delimiter must be a single character" +msgstr "COPY分隔字元只能有一個字" + +# commands/copy.c:836 +#: commands/copy.c:836 +msgid "COPY quote available only in CSV mode" +msgstr "" + +# commands/copy.c:841 +#: commands/copy.c:841 +msgid "COPY quote must be a single character" +msgstr "" + +# commands/copy.c:849 +#: commands/copy.c:849 +msgid "COPY escape available only in CSV mode" +msgstr "" + +# commands/copy.c:854 +#: commands/copy.c:854 +msgid "COPY escape must be a single character" +msgstr "" + +# commands/copy.c:862 +#: commands/copy.c:862 +msgid "COPY force quote available only in CSV mode" +msgstr "" + +# commands/copy.c:866 +#: commands/copy.c:866 +msgid "COPY force quote only available using COPY TO" +msgstr "" + +# commands/copy.c:874 +#: commands/copy.c:874 +msgid "COPY force not null available only in CSV mode" +msgstr "" + +# commands/copy.c:878 +#: commands/copy.c:878 +msgid "COPY force not null only available using COPY FROM" +msgstr "" + +# commands/copy.c:886 +#: commands/copy.c:886 +msgid "COPY delimiter must not appear in the NULL specification" +msgstr "" + +# commands/copy.c:894 +#: commands/copy.c:894 +msgid "CSV quote character must not appear in the NULL specification" +msgstr "" + +# commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323 +#: commands/copy.c:905 executor/execMain.c:443 tcop/utility.c:323 +msgid "transaction is read-only" +msgstr "唯讀交易" + +# commands/copy.c:916 +#: commands/copy.c:916 +msgid "must be superuser to COPY to or from a file" +msgstr "" + +# commands/copy.c:917 +#: commands/copy.c:917 +msgid "" +"Anyone can COPY to stdout or from stdin. psql's \\copy command also works " +"for anyone." +msgstr "" + +# commands/copy.c:926 +#: commands/copy.c:926 +#, c-format +msgid "table \"%s\" does not have OIDs" +msgstr "資料表\"%s\"沒有OID" + +# commands/copy.c:952 +#: commands/copy.c:952 +#, c-format +msgid "FORCE QUOTE column \"%s\" not referenced by COPY" +msgstr "" + +# commands/copy.c:975 +#: commands/copy.c:975 +#, c-format +msgid "FORCE NOT NULL column \"%s\" not referenced by COPY" +msgstr "" + +# commands/copy.c:1002 +#: commands/copy.c:1002 +#, c-format +msgid "cannot copy to view \"%s\"" +msgstr "無法複製到view \"%s\"" + +# commands/copy.c:1007 +#: commands/copy.c:1007 +#, c-format +msgid "cannot copy to sequence \"%s\"" +msgstr "無法複製到sequence \"%s\"" + +# commands/copy.c:1012 +#: commands/copy.c:1012 +#, c-format +msgid "cannot copy to non-table relation \"%s\"" +msgstr "無法複製到非資料表relation \"%s\"" + +# commands/copy.c:1031 +#: commands/copy.c:1031 +#, c-format +msgid "could not open file \"%s\" for reading: %m" +msgstr "無法開啟檔案\"%s\"以讀取：%m" + +# commands/copy.c:1040 commands/copy.c:1103 +#: commands/copy.c:1040 commands/copy.c:1103 +#, c-format +msgid "\"%s\" is a directory" +msgstr "\"%s\"是一個目錄" + +# commands/copy.c:1053 +#: commands/copy.c:1053 +#, c-format +msgid "cannot copy from view \"%s\"" +msgstr "無法從view \"%s\"複製" + +# commands/copy.c:1058 +#: commands/copy.c:1058 +#, c-format +msgid "cannot copy from sequence \"%s\"" +msgstr "無法從sequence \"%s\"複製" + +# commands/copy.c:1063 +#: commands/copy.c:1063 +#, c-format +msgid "cannot copy from non-table relation \"%s\"" +msgstr "無法從非資料表relation \"%s\"複製" + +# commands/copy.c:1085 +#: commands/copy.c:1085 +msgid "relative path not allowed for COPY to file" +msgstr "COPY至檔案不允許相對路徑" + +# commands/copy.c:1094 +#: commands/copy.c:1094 +#, c-format +msgid "could not open file \"%s\" for writing: %m" +msgstr "無法開啟檔案\"%s\"以寫入：%m" + +# commands/copy.c:1386 +#: commands/copy.c:1386 +#, c-format +msgid "COPY %s, line %d, column %s" +msgstr "" + +# commands/copy.c:1389 +#: commands/copy.c:1389 commands/copy.c:1422 +#, c-format +msgid "COPY %s, line %d" +msgstr "" + +# commands/copy.c:1397 +#: commands/copy.c:1397 +#, c-format +msgid "COPY %s, line %d, column %s: \"%s\"" +msgstr "" + +# commands/copy.c:1424 +#: commands/copy.c:1408 +#, c-format +msgid "COPY %s, line %d: \"%s\"" +msgstr "" + +# commands/copy.c:1637 +#: commands/copy.c:1634 +msgid "COPY file signature not recognized" +msgstr "" + +# commands/copy.c:1643 +#: commands/copy.c:1640 +msgid "invalid COPY file header (missing flags)" +msgstr "無效的COPY檔案header(缺少旗標)" + +# commands/copy.c:1649 +#: commands/copy.c:1646 +msgid "unrecognized critical flags in COPY file header" +msgstr "" + +# commands/copy.c:1655 +#: commands/copy.c:1652 +msgid "invalid COPY file header (missing length)" +msgstr "無效的COPY檔案header(缺少長度)" + +# commands/copy.c:1663 +#: commands/copy.c:1660 +msgid "invalid COPY file header (wrong length)" +msgstr "無效的COPY檔案header(長度不正確)" + +# commands/copy.c:1742 +#: commands/copy.c:1739 +msgid "null OID in COPY data" +msgstr "COPY資料中有空OID" + +# commands/copy.c:1751 commands/copy.c:1848 +#: commands/copy.c:1748 commands/copy.c:1845 +msgid "invalid OID in COPY data" +msgstr "COPY資料中有無效的OID" + +# commands/copy.c:1771 +#: commands/copy.c:1768 +#, c-format +msgid "missing data for column \"%s\"" +msgstr "欄位\"%s\"缺少資料" + +# commands/copy.c:1781 +#: commands/copy.c:1778 +msgid "unterminated CSV quoted field" +msgstr "" + +# commands/copy.c:1816 +#: commands/copy.c:1813 +msgid "extra data after last expected column" +msgstr "" + +# commands/copy.c:1834 +#: commands/copy.c:1831 +#, c-format +msgid "row field count is %d, expected %d" +msgstr "" + +# commands/copy.c:2056 commands/copy.c:2074 +#: commands/copy.c:2053 commands/copy.c:2071 +msgid "literal carriage return found in data" +msgstr "資料裡含有歸位(carriage return)實量" + +# commands/copy.c:2057 commands/copy.c:2075 +#: commands/copy.c:2054 commands/copy.c:2072 +msgid "Use \"\\r\" to represent carriage return." +msgstr "使用 \"\\r\" 表示歸位(carriage return)。" + +# commands/copy.c:2092 +#: commands/copy.c:2089 +msgid "literal newline found in data" +msgstr "資料裡含有換行(newline)實量" + +# commands/copy.c:2093 +#: commands/copy.c:2090 +msgid "Use \"\\n\" to represent newline." +msgstr "使用 \"\\n\" 表示換行(newline)。" + +# commands/copy.c:2113 commands/copy.c:2129 +#: commands/copy.c:2110 commands/copy.c:2126 +msgid "end-of-copy marker does not match previous newline style" +msgstr "" + +# commands/copy.c:2117 commands/copy.c:2123 +#: commands/copy.c:2114 commands/copy.c:2120 +msgid "end-of-copy marker corrupt" +msgstr "" + +# commands/copy.c:2494 commands/copy.c:2516 +#: commands/copy.c:2485 commands/copy.c:2507 +msgid "unexpected EOF in COPY data" +msgstr "" + +# commands/copy.c:2503 +#: commands/copy.c:2494 +msgid "invalid field size" +msgstr "無效的field大小" + +# commands/copy.c:2530 +#: commands/copy.c:2521 +msgid "incorrect binary data format" +msgstr "不正確的binary資料格式" + +# commands/copy.c:2716 parser/parse_target.c:648 parser/parse_target.c:658 +#: commands/copy.c:2707 parser/parse_target.c:650 parser/parse_target.c:660 +#, c-format +msgid "column \"%s\" specified more than once" +msgstr "欄位\"%s\"被指定多次" + +# commands/functioncmds.c:84 +#: commands/functioncmds.c:84 +#, c-format +msgid "SQL function cannot return shell type %s" +msgstr "SQL函式不能傳回shell型別 %s" + +# commands/functioncmds.c:89 +#: commands/functioncmds.c:89 +#, c-format +msgid "return type %s is only a shell" +msgstr "傳回型別 %s 只是一個shell" + +# commands/functioncmds.c:115 +#: commands/functioncmds.c:115 +#, c-format +msgid "type \"%s\" is not yet defined" +msgstr "型別\"%s\"尚未被定義" + +# commands/functioncmds.c:116 +#: commands/functioncmds.c:116 +msgid "Creating a shell type definition." +msgstr "建立shell型別定義。" + +# commands/functioncmds.c:166 +#: commands/functioncmds.c:166 +#, c-format +msgid "SQL function cannot accept shell type %s" +msgstr "SQL函式不接受shell型別 %s" + +# commands/functioncmds.c:171 +#: commands/functioncmds.c:171 +#, c-format +msgid "argument type %s is only a shell" +msgstr "引數型別 %s 只是一個shell" + +# commands/functioncmds.c:179 parser/parse_oper.c:113 parser/parse_oper.c:124 +#: commands/functioncmds.c:179 parser/parse_oper.c:113 parser/parse_oper.c:124 +#, c-format +msgid "type %s does not exist" +msgstr "%s型別不存在" + +# commands/functioncmds.c:186 +#: commands/functioncmds.c:186 +msgid "functions cannot accept set arguments" +msgstr "函式不接受set引數" + +# commands/functioncmds.c:273 +#: commands/functioncmds.c:273 +msgid "no function body specified" +msgstr "" + +# commands/functioncmds.c:280 +#: commands/functioncmds.c:280 +msgid "no language specified" +msgstr "未指定語言" + +# commands/functioncmds.c:342 +#: commands/functioncmds.c:342 +#, c-format +msgid "unrecognized function attribute \"%s\" ignored" +msgstr "" + +# commands/functioncmds.c:386 +#: commands/functioncmds.c:386 +#, c-format +msgid "only one AS item needed for language \"%s\"" +msgstr "" + +# commands/functioncmds.c:458 +#: commands/functioncmds.c:458 +msgid "You need to use \"createlang\" to load the language into the database." +msgstr "" + +# commands/functioncmds.c:578 commands/functioncmds.c:684 +# commands/functioncmds.c:751 +#: commands/functioncmds.c:578 commands/functioncmds.c:684 +#: commands/functioncmds.c:751 +#, c-format +msgid "\"%s\" is an aggregate function" +msgstr "\"%s\"是一個aggregate function" + +# commands/functioncmds.c:580 +#: commands/functioncmds.c:580 +msgid "Use DROP AGGREGATE to drop aggregate functions." +msgstr "使用DROP AGGREGATE刪除aggregate functions。" + +# commands/functioncmds.c:587 +#: commands/functioncmds.c:587 +#, c-format +msgid "removing built-in function \"%s\"" +msgstr "刪除內建函式\"%s\"" + +# commands/functioncmds.c:686 +#: commands/functioncmds.c:686 +msgid "Use ALTER AGGREGATE to rename aggregate functions." +msgstr "使用ALTER AGGREGATE重新命名aggregate functions。" + +# commands/functioncmds.c:753 +#: commands/functioncmds.c:753 +msgid "Use ALTER AGGREGATE to change owner of aggregate functions." +msgstr "使用ALTER AGGREGATE改變aggregate functions的擁有者。" + +# commands/functioncmds.c:922 +#: commands/functioncmds.c:922 +#, c-format +msgid "source data type %s is only a shell" +msgstr "來源資料型別 %s 只是一個shell" + +# commands/functioncmds.c:928 +#: commands/functioncmds.c:928 +#, c-format +msgid "target data type %s is only a shell" +msgstr "目標資料型別 %s 只是一個shell" + +# commands/functioncmds.c:934 +#: commands/functioncmds.c:934 +#, c-format +msgid "source data type %s is a pseudo-type" +msgstr "" + +# commands/functioncmds.c:940 +#: commands/functioncmds.c:940 +#, c-format +msgid "target data type %s is a pseudo-type" +msgstr "" + +# commands/functioncmds.c:971 +#: commands/functioncmds.c:971 +msgid "cast function must take one to three arguments" +msgstr "" + +# commands/functioncmds.c:975 +#: commands/functioncmds.c:975 +msgid "argument of cast function must match source data type" +msgstr "" + +# commands/functioncmds.c:979 +#: commands/functioncmds.c:979 +msgid "second argument of cast function must be type integer" +msgstr "" + +# commands/functioncmds.c:983 +#: commands/functioncmds.c:983 +msgid "third argument of cast function must be type boolean" +msgstr "" + +# commands/functioncmds.c:987 +#: commands/functioncmds.c:987 +msgid "return data type of cast function must match target data type" +msgstr "" + +# commands/functioncmds.c:998 +#: commands/functioncmds.c:998 +msgid "cast function must not be volatile" +msgstr "cast函式不能是volatile" + +# commands/functioncmds.c:1003 +#: commands/functioncmds.c:1003 +msgid "cast function must not be an aggregate function" +msgstr "cast函式不能是aggregate function" + +# commands/functioncmds.c:1007 +#: commands/functioncmds.c:1007 +msgid "cast function must not return a set" +msgstr "cast函式不能傳回set" + +# commands/functioncmds.c:1031 +#: commands/functioncmds.c:1031 +msgid "must be superuser to create a cast WITHOUT FUNCTION" +msgstr "" + +# commands/functioncmds.c:1046 +#: commands/functioncmds.c:1046 +msgid "source and target data types are not physically compatible" +msgstr "" + +# commands/functioncmds.c:1056 +#: commands/functioncmds.c:1056 +msgid "source data type and target data type are the same" +msgstr "" + +# commands/functioncmds.c:1090 +#: commands/functioncmds.c:1090 +#, c-format +msgid "cast from type %s to type %s already exists" +msgstr "" + +# commands/define.c:66 commands/define.c:183 commands/define.c:215 +# commands/define.c:249 +#: commands/define.c:66 commands/define.c:183 commands/define.c:215 +#: commands/define.c:249 +#, c-format +msgid "%s requires a parameter" +msgstr "%s需要一個參數" + +# commands/define.c:105 commands/define.c:116 commands/define.c:150 +# commands/define.c:168 +#: commands/define.c:105 commands/define.c:116 commands/define.c:150 +#: commands/define.c:168 +#, c-format +msgid "%s requires a numeric value" +msgstr "%s需要一個numeric值" + +# commands/define.c:136 +#: commands/define.c:136 +#, c-format +msgid "%s does not take a parameter" +msgstr "%s不需要參數" + +# commands/define.c:197 +#: commands/define.c:197 +#, c-format +msgid "argument of %s must be a name" +msgstr "%s的引數必需是名稱" + +# commands/define.c:233 +#: commands/define.c:233 +#, c-format +msgid "argument of %s must be a type name" +msgstr "%s的引數必需是型別名稱" + +# commands/define.c:258 +#: commands/define.c:258 +#, c-format +msgid "%s requires an integer value" +msgstr "%s需要一個整數" + +# commands/define.c:279 +#: commands/define.c:279 +#, c-format +msgid "invalid argument for %s: \"%s\"" +msgstr "給 %s 的引數不合法：\"%s\"" + +# commands/opclasscmds.c:129 +#: commands/opclasscmds.c:129 +msgid "must be superuser to create an operator class" +msgstr "只有管理者能建立operator class" + +# commands/opclasscmds.c:166 +#: commands/opclasscmds.c:166 +#, c-format +msgid "invalid operator number %d, must be between 1 and %d" +msgstr "" + +# commands/opclasscmds.c:204 +#: commands/opclasscmds.c:204 +#, c-format +msgid "invalid procedure number %d, must be between 1 and %d" +msgstr "" + +# commands/opclasscmds.c:226 +#: commands/opclasscmds.c:226 +msgid "storage type specified more than once" +msgstr "" + +# commands/opclasscmds.c:253 +#: commands/opclasscmds.c:253 +#, c-format +msgid "" +"storage type may not be different from data type for access method \"%s\"" +msgstr "" + +# commands/opclasscmds.c:271 +#: commands/opclasscmds.c:271 +#, c-format +msgid "operator class \"%s\" for access method \"%s\" already exists" +msgstr "" + +# commands/opclasscmds.c:300 +#: commands/opclasscmds.c:300 +#, c-format +msgid "could not make operator class \"%s\" be default for type %s" +msgstr "" + +# commands/opclasscmds.c:303 +#: commands/opclasscmds.c:303 +#, c-format +msgid "Operator class \"%s\" already is the default." +msgstr "operator class \"%s\"已經是預設的。" + +# commands/opclasscmds.c:430 +#: commands/opclasscmds.c:430 +msgid "btree operators must be binary" +msgstr "btree operators必須是binary" + +# commands/opclasscmds.c:434 +#: commands/opclasscmds.c:434 +msgid "btree operators must return boolean" +msgstr "btree operators必須傳回boolean" + +# commands/opclasscmds.c:438 +#: commands/opclasscmds.c:438 +msgid "btree operators must have index type as left input" +msgstr "" + +# commands/opclasscmds.c:484 +#: commands/opclasscmds.c:484 +msgid "btree procedures must have two arguments" +msgstr "" + +# commands/opclasscmds.c:488 +#: commands/opclasscmds.c:488 +msgid "btree procedures must return integer" +msgstr "" + +# commands/opclasscmds.c:492 +#: commands/opclasscmds.c:492 +msgid "btree procedures must have index type as first input" +msgstr "" + +# commands/opclasscmds.c:525 +#: commands/opclasscmds.c:525 +#, c-format +msgid "procedure number %d appears more than once" +msgstr "" + +# commands/opclasscmds.c:530 +#: commands/opclasscmds.c:530 +#, c-format +msgid "operator number %d appears more than once" +msgstr "" + +# commands/opclasscmds.c:854 +#: commands/opclasscmds.c:854 +#, c-format +msgid "" +"operator class \"%s\" for access method \"%s\" already exists in schema \"%s" +"\"" +msgstr "" + +# commands/indexcmds.c:119 +#: commands/indexcmds.c:120 +msgid "must specify at least one column" +msgstr "至少需要指定一個欄位" + +# commands/indexcmds.c:123 +#: commands/indexcmds.c:124 +#, c-format +msgid "cannot use more than %d columns in an index" +msgstr "索引中不能使用超過 %d 個欄位" + +# commands/indexcmds.c:224 +#: commands/indexcmds.c:238 +#, c-format +msgid "access method \"%s\" does not support unique indexes" +msgstr "" + +# commands/indexcmds.c:229 +#: commands/indexcmds.c:243 +#, c-format +msgid "access method \"%s\" does not support multicolumn indexes" +msgstr "" + +# commands/indexcmds.c:243 +#: commands/indexcmds.c:257 +msgid "" +"index expressions and predicates may refer only to the table being indexed" +msgstr "" + +# commands/indexcmds.c:271 parser/analyze.c:1185 +#: commands/indexcmds.c:285 parser/analyze.c:1197 +#, c-format +msgid "multiple primary keys for table \"%s\" are not allowed" +msgstr "資料表\"%s\"不允許多個主鍵" + +# commands/indexcmds.c:288 +#: commands/indexcmds.c:302 +msgid "primary keys cannot be expressions" +msgstr "主鍵不能是expressions" + +# commands/indexcmds.c:318 commands/indexcmds.c:456 parser/analyze.c:1299 +#: commands/indexcmds.c:332 commands/indexcmds.c:470 parser/analyze.c:1311 +#, c-format +msgid "column \"%s\" named in key does not exist" +msgstr "" + +# commands/indexcmds.c:363 +#: commands/indexcmds.c:377 +#, c-format +msgid "%s %s will create implicit index \"%s\" for table \"%s\"" +msgstr "" + +# commands/indexcmds.c:406 +#: commands/indexcmds.c:420 +msgid "cannot use subquery in index predicate" +msgstr "" + +# commands/indexcmds.c:410 +#: commands/indexcmds.c:424 +msgid "cannot use aggregate in index predicate" +msgstr "" + +# commands/indexcmds.c:419 +#: commands/indexcmds.c:433 +msgid "functions in index predicate must be marked IMMUTABLE" +msgstr "" + +# commands/indexcmds.c:461 commands/tablecmds.c:1299 parser/parse_expr.c:1084 +#: commands/indexcmds.c:475 commands/tablecmds.c:1329 parser/parse_expr.c:1084 +#, c-format +msgid "column \"%s\" does not exist" +msgstr "欄位\"%s\"不存在" + +# commands/indexcmds.c:494 +#: commands/indexcmds.c:508 +msgid "cannot use subquery in index expression" +msgstr "" + +# commands/indexcmds.c:498 +#: commands/indexcmds.c:512 +msgid "cannot use aggregate function in index expression" +msgstr "" + +# commands/indexcmds.c:509 +#: commands/indexcmds.c:523 +msgid "functions in index expression must be marked IMMUTABLE" +msgstr "" + +# commands/indexcmds.c:568 +#: commands/indexcmds.c:582 +#, c-format +msgid "data type %s has no default operator class for access method \"%s\"" +msgstr "" + +# commands/indexcmds.c:570 +#: commands/indexcmds.c:584 +msgid "" +"You must specify an operator class for the index or define a default " +"operator class for the data type." +msgstr "" + +# commands/indexcmds.c:623 +#: commands/indexcmds.c:637 +#, c-format +msgid "operator class \"%s\" does not accept data type %s" +msgstr "" + +# commands/indexcmds.c:680 utils/cache/typcache.c:369 +#: commands/indexcmds.c:694 utils/cache/typcache.c:369 +#, c-format +msgid "there are multiple default operator classes for data type %s" +msgstr "" + +# commands/indexcmds.c:949 +#: commands/indexcmds.c:963 +#, c-format +msgid "shared table \"%s\" can only be reindexed in stand-alone mode" +msgstr "" + +# commands/indexcmds.c:956 +#: commands/indexcmds.c:970 +#, c-format +msgid "table \"%s\" has no indexes" +msgstr "資料表\"%s\"沒有索引" + +# commands/indexcmds.c:984 +#: commands/indexcmds.c:998 +msgid "can only reindex the currently open database" +msgstr "只能重新索引目前開啟的資料庫" + +# commands/indexcmds.c:1067 +#: commands/indexcmds.c:1081 +#, c-format +msgid "table \"%s\" was reindexed" +msgstr "資料表\"%s\"已重新索引" + +# commands/prepare.c:61 +#: commands/prepare.c:61 +msgid "invalid statement name: must not be empty" +msgstr "" + +# commands/prepare.c:80 +#: commands/prepare.c:80 +msgid "utility statements cannot be prepared" +msgstr "" + +# commands/prepare.c:168 commands/prepare.c:173 commands/prepare.c:538 +#: commands/prepare.c:168 commands/prepare.c:173 commands/prepare.c:535 +msgid "prepared statement is not a SELECT" +msgstr "" + +# commands/prepare.c:310 +#: commands/prepare.c:307 +#, c-format +msgid "prepared statement \"%s\" already exists" +msgstr "" + +# commands/prepare.c:390 +#: commands/prepare.c:387 +#, c-format +msgid "prepared statement \"%s\" does not exist" +msgstr "" + +# commands/operatorcmds.c:107 commands/operatorcmds.c:115 +#: commands/operatorcmds.c:107 commands/operatorcmds.c:115 +msgid "setof type not allowed for operator argument" +msgstr "" + +# commands/operatorcmds.c:142 +#: commands/operatorcmds.c:142 +#, c-format +msgid "operator attribute \"%s\" not recognized" +msgstr "" + +# commands/operatorcmds.c:152 +#: commands/operatorcmds.c:152 +msgid "operator procedure must be specified" +msgstr "" + +# commands/portalcmds.c:54 commands/portalcmds.c:174 +# commands/portalcmds.c:219 +#: commands/portalcmds.c:54 commands/portalcmds.c:183 +#: commands/portalcmds.c:228 +msgid "invalid cursor name: must not be empty" +msgstr "無效的cursor名稱：不能是空的" + +# commands/portalcmds.c:80 +#: commands/portalcmds.c:89 +msgid "DECLARE CURSOR may not specify INTO" +msgstr "DECLARE CURSOR不能使用INTO" + +# commands/portalcmds.c:84 +#: commands/portalcmds.c:93 +msgid "DECLARE CURSOR ... FOR UPDATE is not supported" +msgstr "DECLARE CURSOR ... FOR UPDATE未被支援" + +# commands/portalcmds.c:85 +#: commands/portalcmds.c:94 +msgid "Cursors must be READ ONLY." +msgstr "cursors必須是READ ONLY。" + +# commands/portalcmds.c:182 commands/portalcmds.c:229 +#: commands/portalcmds.c:191 commands/portalcmds.c:238 +#, c-format +msgid "cursor \"%s\" does not exist" +msgstr "cursor \"%s\"不存在" + +# commands/portalcmds.c:337 tcop/pquery.c:523 tcop/pquery.c:1096 +#: commands/portalcmds.c:346 tcop/pquery.c:523 tcop/pquery.c:1096 +#, c-format +msgid "portal \"%s\" cannot be run" +msgstr "" + +# commands/portalcmds.c:395 +#: commands/portalcmds.c:404 +msgid "could not reposition held cursor" +msgstr "無法重新定位持有的cursor" + +# commands/tablecmds.c:294 +#: commands/tablecmds.c:294 +msgid "ON COMMIT can only be used on temporary tables" +msgstr "" + +# commands/tablecmds.c:396 +#: commands/tablecmds.c:399 +#, c-format +msgid "duplicate check constraint name \"%s\"" +msgstr "" + +# commands/tablecmds.c:552 commands/tablecmds.c:1244 +# commands/tablecmds.c:1450 commands/tablecmds.c:2606 +# commands/tablecmds.c:3768 commands/tablecmds.c:5376 commands/trigger.c:147 +# commands/trigger.c:552 tcop/utility.c:182 tcop/utility.c:217 +#: commands/tablecmds.c:555 commands/tablecmds.c:1274 +#: commands/tablecmds.c:1480 commands/tablecmds.c:2636 +#: commands/tablecmds.c:3798 commands/tablecmds.c:5427 commands/trigger.c:147 +#: commands/trigger.c:552 tcop/utility.c:182 tcop/utility.c:217 +#, c-format +msgid "permission denied: \"%s\" is a system catalog" +msgstr "權限不足: \"%s\" 是系統 catalog" + +# commands/tablecmds.c:563 +#: commands/tablecmds.c:566 +#, c-format +msgid "cannot truncate system relation \"%s\"" +msgstr "" + +# commands/tablecmds.c:573 +#: commands/tablecmds.c:576 +msgid "cannot truncate temporary tables of other sessions" +msgstr "" + +# commands/tablecmds.c:699 +#: commands/tablecmds.c:719 +#, c-format +msgid "column \"%s\" duplicated" +msgstr "欄位\"%s\"重覆" + +# commands/tablecmds.c:724 parser/analyze.c:1055 parser/analyze.c:1261 +#: commands/tablecmds.c:744 parser/analyze.c:1067 parser/analyze.c:1273 +#, c-format +msgid "inherited relation \"%s\" is not a table" +msgstr "" + +# commands/tablecmds.c:730 +#: commands/tablecmds.c:750 +#, c-format +msgid "cannot inherit from temporary relation \"%s\"" +msgstr "" + +# commands/tablecmds.c:747 +#: commands/tablecmds.c:767 +#, c-format +msgid "inherited relation \"%s\" duplicated" +msgstr "" + +# commands/tablecmds.c:801 +#: commands/tablecmds.c:821 +#, c-format +msgid "merging multiple inherited definitions of column \"%s\"" +msgstr "" + +# commands/tablecmds.c:808 +#: commands/tablecmds.c:828 +#, c-format +msgid "inherited column \"%s\" has a type conflict" +msgstr "" + +# commands/tablecmds.c:810 commands/tablecmds.c:955 parser/parse_coerce.c:239 +# parser/parse_coerce.c:1110 parser/parse_coerce.c:1127 +# parser/parse_coerce.c:1173 +#: commands/tablecmds.c:830 commands/tablecmds.c:975 parser/parse_coerce.c:239 +#: parser/parse_coerce.c:1125 parser/parse_coerce.c:1142 +#: parser/parse_coerce.c:1188 +#, c-format +msgid "%s versus %s" +msgstr "" + +# commands/tablecmds.c:946 +#: commands/tablecmds.c:966 +#, c-format +msgid "merging column \"%s\" with inherited definition" +msgstr "" + +# commands/tablecmds.c:953 +#: commands/tablecmds.c:973 +#, c-format +msgid "column \"%s\" has a type conflict" +msgstr "欄位\"%s\"發生型別衝突" + +# commands/tablecmds.c:994 +#: commands/tablecmds.c:1024 +#, c-format +msgid "column \"%s\" inherits conflicting default values" +msgstr "" + +# commands/tablecmds.c:996 +#: commands/tablecmds.c:1026 +msgid "To resolve the conflict, specify a default explicitly." +msgstr "" + +# commands/tablecmds.c:1289 +#: commands/tablecmds.c:1319 +#, c-format +msgid "inherited column \"%s\" must be renamed in child tables too" +msgstr "" + +# commands/tablecmds.c:1307 +#: commands/tablecmds.c:1337 +#, c-format +msgid "cannot rename system column \"%s\"" +msgstr "無法重新命名系統欄位\"%s\"" + +# commands/tablecmds.c:1317 +#: commands/tablecmds.c:1347 +#, c-format +msgid "cannot rename inherited column \"%s\"" +msgstr "無法重新命名被繼承的欄位\"%s\"" + +# commands/tablecmds.c:1328 commands/tablecmds.c:2889 +#: commands/tablecmds.c:1358 commands/tablecmds.c:2919 +#, c-format +msgid "column \"%s\" of relation \"%s\" already exists" +msgstr "" + +# commands/tablecmds.c:2189 +#: commands/tablecmds.c:2219 +#, c-format +msgid "cannot rewrite system relation \"%s\"" +msgstr "無法重寫系統relation \"%s\"" + +# commands/tablecmds.c:2199 +#: commands/tablecmds.c:2229 +msgid "cannot rewrite temporary tables of other sessions" +msgstr "無法重寫其它session的暫存資料表" + +# commands/tablecmds.c:2490 +#: commands/tablecmds.c:2520 +#, c-format +msgid "check constraint \"%s\" is violated by some row" +msgstr "有資料行違反check constraint \"%s\"" + +# commands/tablecmds.c:2503 +#: commands/tablecmds.c:2533 +#, c-format +msgid "column \"%s\" contains null values" +msgstr "欄位\"%s\"包含空值" + +# commands/tablecmds.c:2588 +#: commands/tablecmds.c:2618 +#, c-format +msgid "\"%s\" is not a table or view" +msgstr "\"%s\"不是資料表或view" + +# commands/tablecmds.c:2741 +#: commands/tablecmds.c:2771 +#, c-format +msgid "cannot alter table \"%s\" because column \"%s\".\"%s\" uses its rowtype" +msgstr "" + +# commands/tablecmds.c:2807 +#: commands/tablecmds.c:2837 +msgid "column must be added to child tables too" +msgstr "欄位也必須被加入子資料表" + +# commands/tablecmds.c:2850 +#: commands/tablecmds.c:2880 +#, c-format +msgid "child table \"%s\" has different type for column \"%s\"" +msgstr "子資料表\"%s\"的欄位\"%s\"有不同的型別" + +# commands/tablecmds.c:2862 +#: commands/tablecmds.c:2892 +#, c-format +msgid "merging definition of column \"%s\" for child \"%s\"" +msgstr "" + +# commands/tablecmds.c:3079 commands/tablecmds.c:3172 +# commands/tablecmds.c:3222 commands/tablecmds.c:3318 +# commands/tablecmds.c:3379 commands/tablecmds.c:4573 +#: commands/tablecmds.c:3109 commands/tablecmds.c:3202 +#: commands/tablecmds.c:3252 commands/tablecmds.c:3348 +#: commands/tablecmds.c:3409 commands/tablecmds.c:4617 +#, c-format +msgid "cannot alter system column \"%s\"" +msgstr "無法修改系統欄位\"%s\"" + +# commands/tablecmds.c:3115 +#: commands/tablecmds.c:3145 +#, c-format +msgid "column \"%s\" is in a primary key" +msgstr "欄位\"%s\"是主鍵" + +# commands/tablecmds.c:3265 commands/tablecmds.c:5365 +#: commands/tablecmds.c:3295 commands/tablecmds.c:5416 +#, c-format +msgid "\"%s\" is not a table or index" +msgstr "\"%s\"不是資料表或索引" + +# commands/tablecmds.c:3292 +#: commands/tablecmds.c:3322 +#, c-format +msgid "statistics target %d is too low" +msgstr "" + +# commands/tablecmds.c:3300 +#: commands/tablecmds.c:3330 +#, c-format +msgid "lowering statistics target to %d" +msgstr "" + +# commands/tablecmds.c:3360 +#: commands/tablecmds.c:3390 +#, c-format +msgid "invalid storage type \"%s\"" +msgstr "不合法的儲存型別\"%s\"" + +# commands/tablecmds.c:3391 +#: commands/tablecmds.c:3421 +#, c-format +msgid "column data type %s can only have storage PLAIN" +msgstr "" + +# commands/tablecmds.c:3448 +#: commands/tablecmds.c:3478 +#, c-format +msgid "cannot drop system column \"%s\"" +msgstr "無法刪除系統欄位\"%s\"" + +# commands/tablecmds.c:3455 +#: commands/tablecmds.c:3485 +#, c-format +msgid "cannot drop inherited column \"%s\"" +msgstr "無法刪除被繼承的欄位\"%s\"" + +# commands/tablecmds.c:3756 +#: commands/tablecmds.c:3786 +#, c-format +msgid "referenced relation \"%s\" is not a table" +msgstr "被參照的relation \"%s\"不是資料表" + +# commands/tablecmds.c:3790 +#: commands/tablecmds.c:3820 +msgid "cannot reference temporary table from permanent table constraint" +msgstr "" + +# commands/tablecmds.c:3797 +#: commands/tablecmds.c:3827 +msgid "cannot reference permanent table from temporary table constraint" +msgstr "" + +# commands/tablecmds.c:3842 commands/tablecmds.c:4330 +#: commands/tablecmds.c:3872 commands/tablecmds.c:4362 +msgid "number of referencing and referenced columns for foreign key disagree" +msgstr "" + +# commands/tablecmds.c:3863 +#: commands/tablecmds.c:3893 +#, c-format +msgid "foreign key constraint \"%s\" cannot be implemented" +msgstr "" + +# commands/tablecmds.c:3866 +#: commands/tablecmds.c:3896 +#, c-format +msgid "Key columns \"%s\" and \"%s\" are of incompatible types: %s and %s." +msgstr "" + +# commands/tablecmds.c:3880 +#: commands/tablecmds.c:3910 +#, c-format +msgid "foreign key constraint \"%s\" will require costly sequential scans" +msgstr "" + +# commands/tablecmds.c:3883 +#: commands/tablecmds.c:3913 +#, c-format +msgid "Key columns \"%s\" and \"%s\" are of different types: %s and %s." +msgstr "" + +# commands/tablecmds.c:3968 +#: commands/tablecmds.c:3998 +#, c-format +msgid "column \"%s\" referenced in foreign key constraint does not exist" +msgstr "" + +# commands/tablecmds.c:3973 +#: commands/tablecmds.c:4003 +#, c-format +msgid "cannot have more than %d keys in a foreign key" +msgstr "一個外鍵不能超過%d個欄位" + +# commands/tablecmds.c:4042 +#: commands/tablecmds.c:4072 +#, c-format +msgid "there is no primary key for referenced table \"%s\"" +msgstr "被參考的資料表\"%s\"沒有主鍵" + +# commands/tablecmds.c:4160 +#: commands/tablecmds.c:4190 +#, c-format +msgid "" +"there is no unique constraint matching given keys for referenced table \"%s\"" +msgstr "" + +# commands/tablecmds.c:4530 commands/trigger.c:2756 +#: commands/tablecmds.c:4574 commands/trigger.c:2777 +#, c-format +msgid "constraint \"%s\" does not exist" +msgstr "constraint \"%s\"不存在" + +# commands/tablecmds.c:4535 +#: commands/tablecmds.c:4579 +#, c-format +msgid "multiple constraints named \"%s\" were dropped" +msgstr "多個名稱為\"%s\"的constraints被刪除" + +# commands/tablecmds.c:4580 +#: commands/tablecmds.c:4624 +#, c-format +msgid "cannot alter inherited column \"%s\"" +msgstr "無法修改被繼承的欄位\"%s\"" + +# commands/tablecmds.c:4620 +#: commands/tablecmds.c:4664 +msgid "transform expression must not return a set" +msgstr "" + +# commands/tablecmds.c:4626 +#: commands/tablecmds.c:4670 +msgid "cannot use subquery in transform expression" +msgstr "" + +# commands/tablecmds.c:4630 +#: commands/tablecmds.c:4674 +msgid "cannot use aggregate function in transform expression" +msgstr "" + +# commands/tablecmds.c:4647 +#: commands/tablecmds.c:4691 +#, c-format +msgid "column \"%s\" cannot be cast to type \"%s\"" +msgstr "欄位\"%s\"無法被轉換為型別\"%s\"" + +# commands/tablecmds.c:4673 +#: commands/tablecmds.c:4717 +#, c-format +msgid "type of inherited column \"%s\" must be changed in child tables too" +msgstr "" + +# commands/tablecmds.c:4711 +#: commands/tablecmds.c:4755 +#, c-format +msgid "cannot alter type of column \"%s\" twice" +msgstr "無法修改欄位\"%s\"的型別兩次" + +# commands/tablecmds.c:4738 +#: commands/tablecmds.c:4789 +#, c-format +msgid "default for column \"%s\" cannot be cast to type \"%s\"" +msgstr "欄位\"%s\"的預設值不能轉型成\"%s\"" + +# commands/tablecmds.c:4838 +#: commands/tablecmds.c:4889 +msgid "cannot alter type of a column used by a view or rule" +msgstr "不能修改被view或rule使用的欄位" + +# commands/tablecmds.c:4839 +#: commands/tablecmds.c:4890 +#, c-format +msgid "%s depends on column \"%s\"" +msgstr "%s 依存於欄位\"%s\"" + +# commands/tablecmds.c:5155 +#: commands/tablecmds.c:5206 +#, c-format +msgid "\"%s\" is not a table, TOAST table, index, view, or sequence" +msgstr "\"%s\"不是資料表、TOAST資料表、索引、view或sequence" + +# commands/tablecmds.c:5395 +#: commands/tablecmds.c:5446 +msgid "cannot have multiple SET TABLESPACE subcommands" +msgstr "不允許多個SET TABLESPACE子命令" + +# commands/tablecmds.c:5425 +#: commands/tablecmds.c:5476 +#, c-format +msgid "cannot move system relation \"%s\"" +msgstr "無法搬移系統relation \"%s\"" + +# commands/tablecmds.c:5435 +#: commands/tablecmds.c:5486 +msgid "cannot move temporary tables of other sessions" +msgstr "無法替其它session搬移暫存資料表" + +# commands/tablecmds.c:5645 +#: commands/tablecmds.c:5696 +msgid "shared tables cannot be toasted after initdb" +msgstr "" + +# commands/tablecmds.c:5660 +#: commands/tablecmds.c:5711 +#, c-format +msgid "table \"%s\" already has a TOAST table" +msgstr "資料表\"%s\"已經有TOAST資料表" + +# commands/tablecmds.c:5677 +#: commands/tablecmds.c:5728 +#, c-format +msgid "table \"%s\" does not need a TOAST table" +msgstr "資料表\"%s\"不需要TOAST資料表" + +# commands/proclang.c:64 +#: commands/proclang.c:64 +msgid "must be superuser to create procedural language" +msgstr "只能管理者能建立程序語言" + +# commands/proclang.c:77 commands/proclang.c:265 +#: commands/proclang.c:77 commands/proclang.c:265 +#, c-format +msgid "language \"%s\" already exists" +msgstr "語言\"%s\"已經存在" + +# commands/proclang.c:97 +#: commands/proclang.c:97 +#, c-format +msgid "" +"changing return type of function %s from \"opaque\" to \"language_handler\"" +msgstr "將函式%s的傳回型別從\"opaque\"變更為\"language_handler\"" + +# commands/proclang.c:104 +#: commands/proclang.c:104 +#, c-format +msgid "function %s must return type \"language_handler\"" +msgstr "函式%s必須傳回型別\"language_handler\"" + +# commands/proclang.c:188 +#: commands/proclang.c:188 +msgid "must be superuser to drop procedural language" +msgstr "只有管理者能刪除程序語言" + +# commands/proclang.c:271 +#: commands/proclang.c:271 +msgid "must be superuser to rename procedural language" +msgstr "只有管理者能重新命名程序語言" + +# commands/schemacmds.c:86 commands/user.c:883 commands/user.c:1018 +#: commands/schemacmds.c:84 commands/user.c:883 commands/user.c:1018 +msgid "permission denied" +msgstr "權限不足" + +# commands/schemacmds.c:87 +#: commands/schemacmds.c:85 +#, c-format +msgid "\"%s\" is not a superuser, so cannot create a schema for \"%s\"" +msgstr "" + +# commands/schemacmds.c:102 commands/schemacmds.c:297 +#: commands/schemacmds.c:100 commands/schemacmds.c:268 +#, c-format +msgid "unacceptable schema name \"%s\"" +msgstr "" + +# commands/schemacmds.c:103 commands/schemacmds.c:298 +#: commands/schemacmds.c:101 commands/schemacmds.c:269 +msgid "The prefix \"pg_\" is reserved for system schemas." +msgstr "" + +# commands/sequence.c:403 commands/sequence.c:595 commands/sequence.c:638 +#: commands/sequence.c:399 commands/sequence.c:591 commands/sequence.c:634 +#, c-format +msgid "permission denied for sequence %s" +msgstr "" + +# commands/sequence.c:480 +#: commands/sequence.c:476 +#, c-format +msgid "nextval: reached maximum value of sequence \"%s\" (%s)" +msgstr "" + +# commands/sequence.c:503 +#: commands/sequence.c:499 +#, c-format +msgid "nextval: reached minimum value of sequence \"%s\" (%s)" +msgstr "" + +# commands/sequence.c:601 +#: commands/sequence.c:597 +#, c-format +msgid "currval of sequence \"%s\" is not yet defined in this session" +msgstr "" + +# commands/sequence.c:655 +#: commands/sequence.c:651 +#, c-format +msgid "setval: value %s is out of bounds for sequence \"%s\" (%s..%s)" +msgstr "" + +# commands/sequence.c:798 executor/execGrouping.c:328 +# executor/execGrouping.c:388 executor/nodeIndexscan.c:1051 lib/dllist.c:43 +# lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:1006 +# postmaster/pgstat.c:1023 postmaster/pgstat.c:2452 postmaster/pgstat.c:2527 +# postmaster/pgstat.c:2572 postmaster/pgstat.c:2623 +# postmaster/postmaster.c:755 postmaster/postmaster.c:1625 +# postmaster/postmaster.c:2344 storage/buffer/localbuf.c:139 +# storage/file/fd.c:587 storage/file/fd.c:620 storage/file/fd.c:766 +# storage/ipc/sinval.c:789 storage/lmgr/lock.c:497 storage/smgr/md.c:138 +# storage/smgr/md.c:848 storage/smgr/smgr.c:213 utils/adt/cash.c:297 +# utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 +# utils/adt/oracle_compat.c:124 utils/adt/regexp.c:191 +# utils/adt/ri_triggers.c:3471 utils/cache/relcache.c:164 +# utils/cache/relcache.c:178 utils/cache/relcache.c:1130 +# utils/cache/typcache.c:165 utils/cache/typcache.c:487 +# utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:521 utils/fmgr/fmgr.c:532 +# utils/init/miscinit.c:213 utils/init/miscinit.c:234 +# utils/init/miscinit.c:244 utils/misc/guc.c:1898 utils/misc/guc.c:1911 +# utils/misc/guc.c:1924 utils/mmgr/aset.c:337 utils/mmgr/aset.c:503 +# utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 utils/mmgr/portalmem.c:75 +#: commands/sequence.c:794 executor/execGrouping.c:384 lib/dllist.c:43 +#: lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:2432 +#: postmaster/pgstat.c:2499 postmaster/postmaster.c:809 +#: postmaster/postmaster.c:1679 postmaster/postmaster.c:2398 +#: storage/buffer/localbuf.c:139 storage/file/fd.c:587 storage/file/fd.c:620 +#: storage/file/fd.c:766 storage/ipc/sinval.c:789 storage/lmgr/lock.c:494 +#: storage/smgr/md.c:844 storage/smgr/smgr.c:213 utils/adt/cash.c:297 +#: utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 +#: utils/adt/oracle_compat.c:125 utils/adt/regexp.c:200 +#: utils/adt/ri_triggers.c:3472 utils/cache/relcache.c:169 +#: utils/cache/relcache.c:183 utils/cache/relcache.c:1135 +#: utils/cache/typcache.c:165 utils/cache/typcache.c:487 +#: utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:528 utils/hash/dynahash.c:178 +#: utils/hash/dynahash.c:248 utils/init/miscinit.c:213 +#: utils/init/miscinit.c:234 utils/init/miscinit.c:244 utils/misc/guc.c:1909 +#: utils/misc/guc.c:1922 utils/misc/guc.c:1935 utils/mmgr/aset.c:337 +#: utils/mmgr/aset.c:503 utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 +#: utils/mmgr/portalmem.c:78 +msgid "out of memory" +msgstr "記憶體用盡" + +# commands/sequence.c:963 +#: commands/sequence.c:956 +msgid "INCREMENT must not be zero" +msgstr "INCREMENT 不可為 0" + +# commands/sequence.c:1009 +#: commands/sequence.c:1002 +#, c-format +msgid "MINVALUE (%s) must be less than MAXVALUE (%s)" +msgstr "MINVALUE (%s) 必須小於 MAXVALUE (%s)" + +# commands/sequence.c:1040 +#: commands/sequence.c:1033 +#, c-format +msgid "START value (%s) can't be less than MINVALUE (%s)" +msgstr "START 值 (%s) 不可小於 MINVALUE (%s)" + +# commands/sequence.c:1052 +#: commands/sequence.c:1045 +#, c-format +msgid "START value (%s) can't be greater than MAXVALUE (%s)" +msgstr "START 值 (%s) 不可大於 MAXVALUE (%s)" + +# commands/sequence.c:1067 +#: commands/sequence.c:1060 +#, c-format +msgid "CACHE (%s) must be greater than zero" +msgstr "CACHE (%s) 必須大於 0" + +# commands/trigger.c:134 +#: commands/trigger.c:134 +#, c-format +msgid "could not determine referenced table for constraint \"%s\"" +msgstr "" + +# commands/trigger.c:219 +#: commands/trigger.c:219 +msgid "multiple INSERT events specified" +msgstr "" + +# commands/trigger.c:226 +#: commands/trigger.c:226 +msgid "multiple DELETE events specified" +msgstr "" + +# commands/trigger.c:233 +#: commands/trigger.c:233 +msgid "multiple UPDATE events specified" +msgstr "" + +# commands/trigger.c:266 commands/trigger.c:654 +#: commands/trigger.c:266 commands/trigger.c:654 +#, c-format +msgid "trigger \"%s\" for relation \"%s\" already exists" +msgstr "" + +# commands/trigger.c:287 +#: commands/trigger.c:287 +#, c-format +msgid "changing return type of function %s from \"opaque\" to \"trigger\"" +msgstr "" + +# commands/trigger.c:294 +#: commands/trigger.c:294 +#, c-format +msgid "function %s must return type \"trigger\"" +msgstr "函式 %s 必須傳回型別\"trigger\"" + +# commands/trigger.c:1160 +#: commands/trigger.c:1160 +#, c-format +msgid "trigger function %u returned null value" +msgstr "trigger函 %u 式傳回空值" + +# commands/trigger.c:1212 commands/trigger.c:1325 commands/trigger.c:1454 +#: commands/trigger.c:1214 commands/trigger.c:1331 commands/trigger.c:1464 +msgid "BEFORE STATEMENT trigger cannot return a value" +msgstr "" + +# commands/trigger.c:1581 executor/execMain.c:1151 executor/execMain.c:1457 +# executor/execMain.c:1598 +#: commands/trigger.c:1593 executor/execMain.c:1151 executor/execMain.c:1457 +#: executor/execMain.c:1598 +msgid "could not serialize access due to concurrent update" +msgstr "" + +# commands/trigger.c:2708 +#: commands/trigger.c:2723 +msgid "unnamed constraints cannot be set explicitly" +msgstr "" + +# commands/trigger.c:2741 +#: commands/trigger.c:2762 +#, c-format +msgid "constraint \"%s\" is not deferrable" +msgstr "" + +# commands/tablespace.c:154 commands/tablespace.c:162 +# commands/tablespace.c:168 +#: ../port/copydir.c:47 commands/tablespace.c:150 commands/tablespace.c:158 +#: commands/tablespace.c:164 +#, c-format +msgid "could not create directory \"%s\": %m" +msgstr "無法建立目錄\"%s\"：%m" + +# commands/tablespace.c:181 +#: commands/tablespace.c:177 +#, c-format +msgid "could not stat directory \"%s\": %m" +msgstr "" + +# commands/tablespace.c:190 +#: commands/tablespace.c:186 +#, c-format +msgid "\"%s\" exists but is not a directory" +msgstr "\"%s\"存在，但不是目錄" + +# commands/tablespace.c:227 +#: commands/tablespace.c:223 +#, c-format +msgid "permission denied to create tablespace \"%s\"" +msgstr "建立tablespace \"%s\"被拒" + +# commands/tablespace.c:229 +#: commands/tablespace.c:225 +msgid "Must be superuser to create a tablespace." +msgstr "只有管理者能建立tablespace。" + +# commands/tablespace.c:248 +#: commands/tablespace.c:244 +msgid "tablespace location may not contain single quotes" +msgstr "tablespace的位置不能包含單引號" + +# commands/tablespace.c:258 +#: commands/tablespace.c:254 +msgid "tablespace location must be an absolute path" +msgstr "tablespace的位置必須是絕對路徑" + +# commands/tablespace.c:268 +#: commands/tablespace.c:264 +#, c-format +msgid "tablespace location \"%s\" is too long" +msgstr "tablespace位置\"%s\"過長" + +# commands/tablespace.c:278 commands/tablespace.c:839 +#: commands/tablespace.c:274 commands/tablespace.c:766 +#, c-format +msgid "unacceptable tablespace name \"%s\"" +msgstr "無法接受tablespace名稱\"%s\"" + +# commands/tablespace.c:280 commands/tablespace.c:840 +#: commands/tablespace.c:276 commands/tablespace.c:767 +msgid "The prefix \"pg_\" is reserved for system tablespaces." +msgstr "前置字\"pg_\"被保留給系統tablespace。" + +# commands/tablespace.c:290 commands/tablespace.c:852 +#: commands/tablespace.c:286 commands/tablespace.c:779 +#, c-format +msgid "tablespace \"%s\" already exists" +msgstr "tablespace \"%s\"已經存在" + +# commands/tablespace.c:325 commands/tablespace.c:969 +#: commands/tablespace.c:321 commands/tablespace.c:1033 +#, c-format +msgid "could not set permissions on directory \"%s\": %m" +msgstr "無法設定目錄\"%s\"的權限：%m" + +# commands/tablespace.c:334 +#: commands/tablespace.c:330 +#, c-format +msgid "directory \"%s\" is not empty" +msgstr "目錄\"%s\"不是空的" + +# commands/tablespace.c:355 commands/tablespace.c:984 +#: commands/tablespace.c:351 commands/tablespace.c:1048 +#, c-format +msgid "could not create symbolic link \"%s\": %m" +msgstr "無法建立symbolic link \"%s\"：%m" + +# commands/tablespace.c:386 commands/tablespace.c:483 +#: commands/tablespace.c:382 commands/tablespace.c:479 +msgid "tablespaces are not supported on this platform" +msgstr "這個平臺不支援tablespace" + +# commands/tablespace.c:460 +#: commands/tablespace.c:456 +#, c-format +msgid "tablespace \"%s\" is not empty" +msgstr "tablespace \"%s\"不是空的" + +# commands/tablespace.c:559 +#: commands/tablespace.c:555 +#, c-format +msgid "could not delete directory \"%s\": %m" +msgstr "無法刪除目錄\"%s\"：%m" + +# commands/tablespace.c:610 +#: commands/tablespace.c:606 +#, c-format +msgid "could not remove directory \"%s\": %m" +msgstr "無法刪除目錄\"%s\"：%m" + +# commands/tablespace.c:355 commands/tablespace.c:984 +#: commands/tablespace.c:614 +#, c-format +msgid "could not remove symbolic link \"%s\": %m" +msgstr "無法刪除symbolic link \"%s\"：%m" + +# commands/tablespace.c:997 +#: commands/tablespace.c:1061 +#, c-format +msgid "tablespace %u is not empty" +msgstr "tablespace %u 不是空的" + +# commands/typecmds.c:138 +#: commands/typecmds.c:138 +#, c-format +msgid "type names must be %d characters or less" +msgstr "型別名稱必須在%d個字元以下" + +# commands/typecmds.c:173 +#: commands/typecmds.c:173 +#, c-format +msgid "array element type cannot be %s" +msgstr "陣列元素型別不可為 %s" + +# commands/typecmds.c:206 +#: commands/typecmds.c:206 +#, c-format +msgid "alignment \"%s\" not recognized" +msgstr "" + +# commands/typecmds.c:223 +#: commands/typecmds.c:223 +#, c-format +msgid "storage \"%s\" not recognized" +msgstr "" + +# commands/typecmds.c:228 +#: commands/typecmds.c:228 +#, c-format +msgid "type attribute \"%s\" not recognized" +msgstr "" + +# commands/typecmds.c:238 +#: commands/typecmds.c:238 +msgid "type input function must be specified" +msgstr "" + +# commands/typecmds.c:242 +#: commands/typecmds.c:242 +msgid "type output function must be specified" +msgstr "" + +# commands/typecmds.c:281 +#: commands/typecmds.c:281 +#, c-format +msgid "changing return type of function %s from \"opaque\" to %s" +msgstr "" + +# commands/typecmds.c:288 +#: commands/typecmds.c:288 +#, c-format +msgid "type input function %s must return type %s" +msgstr "" + +# commands/typecmds.c:298 +#: commands/typecmds.c:298 +#, c-format +msgid "changing return type of function %s from \"opaque\" to \"cstring\"" +msgstr "" + +# commands/typecmds.c:305 +#: commands/typecmds.c:305 +#, c-format +msgid "type output function %s must return type \"cstring\"" +msgstr "" + +# commands/typecmds.c:314 +#: commands/typecmds.c:314 +#, c-format +msgid "type receive function %s must return type %s" +msgstr "" + +# commands/typecmds.c:323 +#: commands/typecmds.c:323 +#, c-format +msgid "type send function %s must return type \"bytea\"" +msgstr "" + +# commands/typecmds.c:536 +#: commands/typecmds.c:536 +#, c-format +msgid "domain names must be %d characters or less" +msgstr "" + +# commands/typecmds.c:557 +#: commands/typecmds.c:557 +#, c-format +msgid "\"%s\" is not a valid base type for a domain" +msgstr "" + +# commands/typecmds.c:617 commands/typecmds.c:1504 +#: commands/typecmds.c:617 commands/typecmds.c:1504 +msgid "foreign key constraints not possible for domains" +msgstr "" + +# commands/typecmds.c:637 +#: commands/typecmds.c:637 +msgid "multiple default expressions" +msgstr "多個預設的expressions" + +# commands/typecmds.c:667 commands/typecmds.c:676 +#: commands/typecmds.c:667 commands/typecmds.c:676 +msgid "conflicting NULL/NOT NULL constraints" +msgstr "NULL/NOT NULL限制發生衝突" + +# commands/typecmds.c:695 commands/typecmds.c:1522 +#: commands/typecmds.c:695 commands/typecmds.c:1522 +msgid "unique constraints not possible for domains" +msgstr "" + +# commands/typecmds.c:701 commands/typecmds.c:1528 +#: commands/typecmds.c:701 commands/typecmds.c:1528 +msgid "primary key constraints not possible for domains" +msgstr "" + +# commands/typecmds.c:710 commands/typecmds.c:1537 +#: commands/typecmds.c:710 commands/typecmds.c:1537 +msgid "specifying constraint deferrability not supported for domains" +msgstr "" + +# commands/typecmds.c:831 commands/typecmds.c:1780 +#: commands/typecmds.c:831 commands/typecmds.c:1780 +#, c-format +msgid "\"%s\" is not a domain" +msgstr "\"%s\"不是一個domain" + +# commands/typecmds.c:901 +#: commands/typecmds.c:901 +#, c-format +msgid "changing argument type of function %s from \"opaque\" to \"cstring\"" +msgstr "" + +# commands/typecmds.c:971 +#: commands/typecmds.c:971 +#, c-format +msgid "changing argument type of function %s from \"opaque\" to %s" +msgstr "" + +# commands/typecmds.c:1083 +#: commands/typecmds.c:1083 +#, c-format +msgid "type analyze function %s must return type \"boolean\"" +msgstr "" + +# commands/typecmds.c:1112 +#: commands/typecmds.c:1112 +msgid "composite type must have at least one attribute" +msgstr "" + +# commands/typecmds.c:1341 +#: commands/typecmds.c:1341 +#, c-format +msgid "column \"%s\" of table \"%s\" contains null values" +msgstr "" + +# commands/typecmds.c:1608 +#: commands/typecmds.c:1608 +#, c-format +msgid "" +"column \"%s\" of table \"%s\" contains values that violate the new constraint" +msgstr "" + +# commands/typecmds.c:1814 +#: commands/typecmds.c:1814 +#, c-format +msgid "constraint \"%s\" for domain \"%s\" already exists" +msgstr "" + +# commands/typecmds.c:1855 commands/typecmds.c:1864 +#: commands/typecmds.c:1855 commands/typecmds.c:1864 +msgid "cannot use table references in domain check constraint" +msgstr "" + +# commands/typecmds.c:1876 +#: commands/typecmds.c:1876 +msgid "cannot use aggregate in check constraint" +msgstr "" + +# commands/typecmds.c:2090 +#: commands/typecmds.c:2090 +#, c-format +msgid "\"%s\" is a table's row type" +msgstr "" + +# commands/user.c:174 commands/user.c:272 commands/user.c:321 +# commands/user.c:402 +#: commands/user.c:174 commands/user.c:272 commands/user.c:321 +#: commands/user.c:402 +#, c-format +msgid "could not write to temporary file \"%s\": %m" +msgstr "無法寫入暫存檔\"%s\"：%m" + +# commands/user.c:209 +#: commands/user.c:209 +#, c-format +msgid "invalid group name \"%s\"" +msgstr "不合法的群組名稱\"%s\"" + +# commands/user.c:240 commands/user.c:371 +#: commands/user.c:240 commands/user.c:371 +#, c-format +msgid "invalid user name \"%s\"" +msgstr "不合法的使用者名稱\"%s\"" + +# commands/user.c:378 +#: commands/user.c:378 +#, c-format +msgid "invalid user password \"%s\"" +msgstr "無效的使用者密碼 \"%s\"" + +# commands/user.c:638 +#: commands/user.c:638 +msgid "user ID must be positive" +msgstr "使用者ID必須是正數" + +# commands/user.c:655 +#: commands/user.c:655 +msgid "must be superuser to create users" +msgstr "只有管理者能建立使用者" + +# commands/user.c:660 +#: commands/user.c:660 +#, c-format +msgid "user name \"%s\" is reserved" +msgstr "使用者名稱\"%s\"已被保留" + +# commands/user.c:697 commands/user.c:1252 +#: commands/user.c:697 commands/user.c:1252 +#, c-format +msgid "user \"%s\" already exists" +msgstr "使用者\"%s\"已經存在" + +# commands/user.c:702 +#: commands/user.c:702 +#, c-format +msgid "user ID %d is already assigned" +msgstr "使用者ID %d已經被指派" + +# commands/user.c:899 commands/user.c:1012 commands/user.c:1104 +# commands/user.c:1233 commands/variable.c:664 utils/cache/lsyscache.c:2064 +# utils/init/miscinit.c:335 +#: commands/user.c:899 commands/user.c:1012 commands/user.c:1104 +#: commands/user.c:1233 commands/variable.c:664 utils/cache/lsyscache.c:2044 +#: utils/init/miscinit.c:335 +#, c-format +msgid "user \"%s\" does not exist" +msgstr "使用者\"%s\"不存在" + +# commands/user.c:1077 +#: commands/user.c:1077 +msgid "must be superuser to drop users" +msgstr "只有管理者能刪除使用者" + +# commands/user.c:1111 +#: commands/user.c:1111 +msgid "current user cannot be dropped" +msgstr "不能刪除目前的使用者" + +# commands/user.c:1115 +#: commands/user.c:1115 +msgid "session user cannot be dropped" +msgstr "不能月除session使用者" + +# commands/user.c:1142 +#: commands/user.c:1142 +#, c-format +msgid "user \"%s\" cannot be dropped" +msgstr "不能刪除使用者\"%s\"" + +# commands/user.c:1143 +#: commands/user.c:1143 +#, c-format +msgid "The user owns database \"%s\"." +msgstr "使用者擁有資料庫\"%s\"。" + +# commands/user.c:1244 +#: commands/user.c:1244 +msgid "session user may not be renamed" +msgstr "不能重新命名session使用者" + +# commands/user.c:1258 +#: commands/user.c:1258 +msgid "must be superuser to rename users" +msgstr "只有管理者能重新命名使用者" + +# commands/user.c:1277 +#: commands/user.c:1277 +msgid "MD5 password cleared because of user rename" +msgstr "" + +# commands/user.c:1311 +#: commands/user.c:1311 +#, c-format +msgid "before using passwords you must revoke privileges on %s" +msgstr "" + +# commands/user.c:1313 +#: commands/user.c:1313 +msgid "" +"This restriction is to prevent unprivileged users from reading the passwords." +msgstr "" + +# commands/user.c:1314 +#: commands/user.c:1314 +#, c-format +msgid "Try REVOKE ALL ON \"%s\" FROM PUBLIC." +msgstr "" + +# commands/user.c:1378 +#: commands/user.c:1378 +msgid "group ID must be positive" +msgstr "群組ID必需是正數" + +# commands/user.c:1391 +#: commands/user.c:1391 +msgid "must be superuser to create groups" +msgstr "只有管理者才能建立群組" + +# commands/user.c:1396 +#: commands/user.c:1396 +#, c-format +msgid "group name \"%s\" is reserved" +msgstr "群組名稱\"%s\"被保留" + +# commands/user.c:1433 commands/user.c:1815 +#: commands/user.c:1433 commands/user.c:1815 +#, c-format +msgid "group \"%s\" already exists" +msgstr "群組\"%s\"已經存在" + +# commands/user.c:1438 +#: commands/user.c:1438 +#, c-format +msgid "group ID %d is already assigned" +msgstr "" + +# commands/user.c:1518 +#: commands/user.c:1518 +msgid "must be superuser to alter groups" +msgstr "只有管理者才能修改群組" + +# commands/user.c:1597 +#: commands/user.c:1597 +#, c-format +msgid "group \"%s\" does not have any members" +msgstr "群組\"%s\"沒有任何成員" + +# commands/user.c:1625 +#: commands/user.c:1625 +#, c-format +msgid "user \"%s\" is not in group \"%s\"" +msgstr "使用者\"%s\"不屬於群組\"%s\"" + +# commands/user.c:1757 +#: commands/user.c:1757 +msgid "must be superuser to drop groups" +msgstr "只有管理者能刪除群組" + +# commands/user.c:1821 +#: commands/user.c:1821 +msgid "must be superuser to rename groups" +msgstr "只有管理者能重新命名群組" + +# commands/vacuum.c:586 +#: commands/vacuum.c:586 +msgid "oldest xmin is far in the past" +msgstr "" + +# commands/vacuum.c:587 +#: commands/vacuum.c:587 +msgid "Close open transactions soon to avoid wraparound problems." +msgstr "" + +# commands/vacuum.c:804 +#: commands/vacuum.c:804 +msgid "some databases have not been vacuumed in over 2 billion transactions" +msgstr "" + +# commands/vacuum.c:805 +#: commands/vacuum.c:805 +msgid "You may have already suffered transaction-wraparound data loss." +msgstr "" + +# commands/vacuum.c:816 +#: commands/vacuum.c:816 +msgid "some databases have not been vacuumed in over 1 billion transactions" +msgstr "" + +# commands/vacuum.c:817 +#: commands/vacuum.c:817 +msgid "Better vacuum them soon, or you may have a wraparound failure." +msgstr "" + +# commands/vacuum.c:824 +#: commands/vacuum.c:824 +#, c-format +msgid "some databases have not been vacuumed in %d transactions" +msgstr "" + +# commands/vacuum.c:826 +#: commands/vacuum.c:826 +#, c-format +msgid "" +"Better vacuum them within %d transactions, or you may have a wraparound " +"failure." +msgstr "" + +# commands/vacuum.c:922 +#: commands/vacuum.c:922 +#, c-format +msgid "skipping \"%s\" --- only table or database owner can vacuum it" +msgstr "忽略\"%s\" --- 只有資料表或資料庫擁有者能進行重整" + +# commands/vacuum.c:937 +#: commands/vacuum.c:937 +#, c-format +msgid "" +"skipping \"%s\" --- cannot vacuum indexes, views, or special system tables" +msgstr "忽略\"%s\" --- 無法重整索引、view或特殊系統資料表" + +# commands/vacuum.c:1160 commands/vacuumlazy.c:205 +#: commands/vacuum.c:1160 commands/vacuumlazy.c:205 +#, c-format +msgid "vacuuming \"%s.%s\"" +msgstr "重整\"%s.%s\"" + +# commands/vacuum.c:1202 commands/vacuumlazy.c:263 +#: commands/vacuum.c:1208 commands/vacuumlazy.c:263 +#, c-format +msgid "relation \"%s\" page %u is uninitialized --- fixing" +msgstr "" + +# commands/vacuum.c:1328 +#: commands/vacuum.c:1331 +#, c-format +msgid "" +"relation \"%s\" TID %u/%u: InsertTransactionInProgress %u --- can't shrink " +"relation" +msgstr "" + +# commands/vacuum.c:1341 +#: commands/vacuum.c:1344 +#, c-format +msgid "" +"relation \"%s\" TID %u/%u: DeleteTransactionInProgress %u --- can't shrink " +"relation" +msgstr "" + +# commands/vacuum.c:1499 commands/vacuumlazy.c:428 +#: commands/vacuum.c:1498 commands/vacuumlazy.c:422 +#, c-format +msgid "" +"\"%s\": found %.0f removable, %.0f nonremovable row versions in %u pages" +msgstr "" + +# commands/vacuum.c:1502 +#: commands/vacuum.c:1501 +#, c-format +msgid "" +"%.0f dead row versions cannot be removed yet.\n" +"Nonremovable row versions range from %lu to %lu bytes long.\n" +"There were %.0f unused item pointers.\n" +"Total free space (including removable row versions) is %.0f bytes.\n" +"%u pages are or will become empty, including %u at the end of the table.\n" +"%u pages containing %.0f free bytes are potential move destinations.\n" +"%s" +msgstr "" + +# commands/vacuum.c:2255 +#: commands/vacuum.c:2254 +#, c-format +msgid "\"%s\": moved %u row versions, truncated %u to %u pages" +msgstr "" + +# commands/vacuum.c:2258 commands/vacuumlazy.c:489 commands/vacuumlazy.c:770 +# nodes/print.c:86 storage/lmgr/deadlock.c:888 tcop/postgres.c:3285 +#: commands/vacuum.c:2257 commands/vacuumlazy.c:483 commands/vacuumlazy.c:774 +#: nodes/print.c:86 storage/lmgr/deadlock.c:888 tcop/postgres.c:3341 +#, c-format +msgid "%s" +msgstr "%s" + +# commands/vacuum.c:2770 commands/vacuumlazy.c:767 +#: commands/vacuum.c:2769 commands/vacuumlazy.c:771 +#, c-format +msgid "\"%s\": truncated %u to %u pages" +msgstr "" + +# commands/vacuum.c:2860 commands/vacuum.c:2927 commands/vacuumlazy.c:597 +# commands/vacuumlazy.c:657 +#: commands/vacuum.c:2859 commands/vacuum.c:2926 commands/vacuumlazy.c:596 +#: commands/vacuumlazy.c:661 +#, c-format +msgid "index \"%s\" now contains %.0f row versions in %u pages" +msgstr "" + +# commands/vacuum.c:2864 commands/vacuumlazy.c:601 +#: commands/vacuum.c:2863 commands/vacuumlazy.c:600 +#, c-format +msgid "" +"%u index pages have been deleted, %u are currently reusable.\n" +"%s" +msgstr "" + +# commands/vacuum.c:2878 commands/vacuum.c:2947 +#: commands/vacuum.c:2877 commands/vacuum.c:2946 +#, c-format +msgid "" +"index \"%s\" contains %.0f row versions, but table contains %.0f row versions" +msgstr "" + +# commands/vacuum.c:2881 commands/vacuum.c:2950 +#: commands/vacuum.c:2880 commands/vacuum.c:2949 +msgid "Rebuild the index with REINDEX." +msgstr "以 REINDEX 重建索引。" + +# commands/vacuum.c:2931 commands/vacuumlazy.c:661 +#: commands/vacuum.c:2930 commands/vacuumlazy.c:665 +#, c-format +msgid "" +"%.0f index row versions were removed.\n" +"%u index pages have been deleted, %u are currently reusable.\n" +"%s" +msgstr "" + +# commands/vacuumlazy.c:431 +#: commands/vacuumlazy.c:425 +#, c-format +msgid "" +"%.0f dead row versions cannot be removed yet.\n" +"There were %.0f unused item pointers.\n" +"%u pages are entirely empty.\n" +"%s" +msgstr "" + +# commands/vacuumlazy.c:486 +#: commands/vacuumlazy.c:480 +#, c-format +msgid "\"%s\": removed %d row versions in %d pages" +msgstr "" + +# commands/variable.c:65 +#: commands/variable.c:65 +msgid "invalid list syntax for parameter \"datestyle\"" +msgstr "" + +# commands/variable.c:151 +#: commands/variable.c:151 +#, c-format +msgid "unrecognized \"datestyle\" key word: \"%s\"" +msgstr "" + +# commands/variable.c:169 +#: commands/variable.c:169 +msgid "conflicting \"datestyle\" specifications" +msgstr "" + +# commands/variable.c:280 +#: commands/variable.c:280 +msgid "invalid interval value for time zone: month not allowed" +msgstr "" + +# commands/variable.c:403 +#: commands/variable.c:403 +#, c-format +msgid "unrecognized time zone name: \"%s\"" +msgstr "無法識別的時區名稱: \"%s\"" + +# commands/variable.c:411 +#: commands/variable.c:411 +#, c-format +msgid "time zone \"%s\" appears to use leap seconds" +msgstr "" + +# commands/variable.c:413 +#: commands/variable.c:413 +msgid "PostgreSQL does not support leap seconds." +msgstr "" + +# commands/variable.c:483 +#: commands/variable.c:483 +msgid "SET TRANSACTION ISOLATION LEVEL must be called before any query" +msgstr "" + +# commands/variable.c:493 +#: commands/variable.c:493 +msgid "SET TRANSACTION ISOLATION LEVEL must not be called in a subtransaction" +msgstr "" + +# commands/variable.c:593 utils/mb/mbutils.c:188 +#: commands/variable.c:593 utils/mb/mbutils.c:188 +#, c-format +msgid "conversion between %s and %s is not supported" +msgstr "" + +# commands/view.c:89 +#: commands/view.c:89 +msgid "view must have at least one column" +msgstr "view至少要有一個欄位" + +# commands/view.c:170 commands/view.c:182 +#: commands/view.c:170 commands/view.c:182 +msgid "cannot change number of columns in view" +msgstr "不能變更view的欄位數" + +# commands/view.c:187 +#: commands/view.c:187 +#, c-format +msgid "cannot change name of view column \"%s\"" +msgstr "無法修改view欄位\"%s\"的名稱" + +# commands/view.c:194 +#: commands/view.c:194 +#, c-format +msgid "cannot change data type of view column \"%s\"" +msgstr "不能變更view欄位\"%s\"的資料型別" + +# executor/execMain.c:814 +#: executor/execMain.c:814 +#, c-format +msgid "cannot change sequence \"%s\"" +msgstr "無法修改sequence \"%s\"" + +# executor/execMain.c:820 +#: executor/execMain.c:820 +#, c-format +msgid "cannot change TOAST relation \"%s\"" +msgstr "無法修改TOAST relation \"%s\"" + +# executor/execMain.c:826 +#: executor/execMain.c:826 +#, c-format +msgid "cannot change view \"%s\"" +msgstr "無法修改view \"%s\"" + +# executor/execMain.c:1731 +#: executor/execMain.c:1731 +#, c-format +msgid "null value in column \"%s\" violates not-null constraint" +msgstr "" + +# executor/execMain.c:1743 +#: executor/execMain.c:1743 +#, c-format +msgid "new row for relation \"%s\" violates check constraint \"%s\"" +msgstr "" + +# executor/execQual.c:257 executor/execQual.c:285 executor/execQual.c:2065 +# utils/adt/array_userfuncs.c:362 utils/adt/arrayfuncs.c:216 +# utils/adt/arrayfuncs.c:472 utils/adt/arrayfuncs.c:1153 +# utils/adt/arrayfuncs.c:2421 +#: executor/execQual.c:257 executor/execQual.c:285 executor/execQual.c:2065 +#: utils/adt/array_userfuncs.c:362 utils/adt/arrayfuncs.c:216 +#: utils/adt/arrayfuncs.c:472 utils/adt/arrayfuncs.c:1153 +#: utils/adt/arrayfuncs.c:2421 +#, c-format +msgid "number of array dimensions (%d) exceeds the maximum allowed (%d)" +msgstr "" + +# executor/execQual.c:811 +#: executor/execQual.c:811 +msgid "functions and operators can take at most one set argument" +msgstr "" + +# executor/execQual.c:866 executor/execQual.c:910 executor/execQual.c:1086 +# executor/execQual.c:1211 executor/execQual.c:3445 executor/functions.c:666 +# executor/functions.c:705 utils/fmgr/funcapi.c:39 +#: executor/execQual.c:866 executor/execQual.c:910 executor/execQual.c:1086 +#: executor/execQual.c:1211 executor/execQual.c:3445 executor/functions.c:666 +#: executor/functions.c:705 utils/fmgr/funcapi.c:39 +msgid "set-valued function called in context that cannot accept a set" +msgstr "" + +# executor/execQual.c:1293 +#: executor/execQual.c:1293 +msgid "function returning set of rows cannot return null value" +msgstr "" + +# executor/execQual.c:1377 +#: executor/execQual.c:1377 +msgid "table-function protocol for materialize mode was not followed" +msgstr "" + +# executor/execQual.c:1384 +#: executor/execQual.c:1384 +#, c-format +msgid "unrecognized table-function returnMode: %d" +msgstr "" + +# executor/execQual.c:1530 +#: executor/execQual.c:1530 +msgid "IS DISTINCT FROM does not support set arguments" +msgstr "" + +# executor/execQual.c:1604 +#: executor/execQual.c:1604 +msgid "op ANY/ALL (array) does not support set arguments" +msgstr "" + +# executor/execQual.c:2051 +#: executor/execQual.c:2051 +msgid "cannot merge incompatible arrays" +msgstr "" + +# executor/execQual.c:2052 +#: executor/execQual.c:2052 +#, c-format +msgid "" +"Array with element type %s cannot be included in ARRAY construct with " +"element type %s." +msgstr "" + +# executor/execQual.c:2085 utils/adt/arrayfuncs.c:507 +#: executor/execQual.c:2085 utils/adt/arrayfuncs.c:507 +msgid "" +"multidimensional arrays must have array expressions with matching dimensions" +msgstr "" + +# executor/execQual.c:2251 +#: executor/execQual.c:2251 +msgid "NULLIF does not support set arguments" +msgstr "" + +# executor/execQual.c:2432 +#: executor/execQual.c:2432 +#, c-format +msgid "domain %s does not allow null values" +msgstr "" + +# executor/execQual.c:2462 +#: executor/execQual.c:2462 +#, c-format +msgid "value for domain %s violates check constraint \"%s\"" +msgstr "" + +# executor/execQual.c:2804 optimizer/util/clauses.c:427 parser/parse_agg.c:74 +#: executor/execQual.c:2804 optimizer/util/clauses.c:428 parser/parse_agg.c:74 +msgid "aggregate function calls may not be nested" +msgstr "" + +# executor/execQual.c:3066 +#: executor/execQual.c:3066 +#, c-format +msgid "ROW() column has type %s instead of type %s" +msgstr "ROW()欄位的型別為%s而非%s" + +# translator: %s is a SQL statement name +# executor/functions.c:117 +#. translator: %s is a SQL statement name +#: executor/functions.c:117 +#, c-format +msgid "%s is not allowed in a SQL function" +msgstr "SQL函式不允許 %s" + +# translator: %s is a SQL statement name +# executor/functions.c:124 executor/spi.c:1396 +#. translator: %s is a SQL statement name +#: executor/functions.c:124 executor/spi.c:1404 +#, c-format +msgid "%s is not allowed in a non-volatile function" +msgstr "non-volatile函式不允許 %s" + +# executor/functions.c:190 +#: executor/functions.c:190 +#, c-format +msgid "" +"could not determine actual result type for function declared to return type %" +"s" +msgstr "" + +# executor/functions.c:244 +#: executor/functions.c:244 +#, c-format +msgid "could not determine actual type of argument declared %s" +msgstr "" + +# executor/functions.c:790 +#: executor/functions.c:790 +#, c-format +msgid "SQL function \"%s\" statement %d" +msgstr "" + +# executor/functions.c:809 +#: executor/functions.c:809 +#, c-format +msgid "SQL function \"%s\" during startup" +msgstr "" + +# executor/functions.c:889 executor/functions.c:910 executor/functions.c:920 +# executor/functions.c:944 executor/functions.c:952 executor/functions.c:1004 +# executor/functions.c:1016 executor/functions.c:1036 +#: executor/functions.c:889 executor/functions.c:910 executor/functions.c:920 +#: executor/functions.c:944 executor/functions.c:952 executor/functions.c:1004 +#: executor/functions.c:1016 executor/functions.c:1036 +#, c-format +msgid "return type mismatch in function declared to return %s" +msgstr "" + +# executor/functions.c:891 executor/functions.c:922 +#: executor/functions.c:891 executor/functions.c:922 +msgid "Function's final statement must be a SELECT." +msgstr "函式最後的敘述必須是SELECT。" + +# executor/functions.c:912 +#: executor/functions.c:912 +msgid "Function's final statement must not be a SELECT." +msgstr "函式最後的敘述不能是SELECT。" + +# executor/functions.c:946 +#: executor/functions.c:946 +msgid "Final SELECT must return exactly one column." +msgstr "最後的SELECT只能傳回一個欄位。" + +# executor/functions.c:954 +#: executor/functions.c:954 +#, c-format +msgid "Actual return type is %s." +msgstr "實際傳回型別是%s。" + +# executor/functions.c:1006 +#: executor/functions.c:1006 +msgid "Final SELECT returns too many columns." +msgstr "最後的SELECT傳回過多欄位。" + +# executor/functions.c:1018 +#: executor/functions.c:1018 +#, c-format +msgid "Final SELECT returns %s instead of %s at column %d." +msgstr "最後的SELECT傳回 %s 而非 %s 於欄位 %d。" + +# executor/functions.c:1038 +#: executor/functions.c:1038 +msgid "Final SELECT returns too few columns." +msgstr "最後的SELECT傳回欄位不足。" + +# executor/functions.c:1088 +#: executor/functions.c:1088 +#, c-format +msgid "return type %s is not supported for SQL functions" +msgstr "SQL函式不支援傳回%s型別" + +# executor/nodeAgg.c:1330 +#: executor/nodeAgg.c:1330 +#, c-format +msgid "aggregate %u needs to have compatible input type and transition type" +msgstr "" + +# executor/nodeFunctionscan.c:93 +#: executor/nodeFunctionscan.c:93 +msgid "query-specified return row and actual function return row do not match" +msgstr "" + +# executor/nodeHashjoin.c:571 executor/nodeHashjoin.c:581 +#: executor/nodeHashjoin.c:571 executor/nodeHashjoin.c:581 +#, c-format +msgid "could not read from hash-join temporary file: %m" +msgstr "" + +# executor/nodeHashjoin.c:641 executor/nodeHashjoin.c:648 +#: executor/nodeHashjoin.c:641 executor/nodeHashjoin.c:648 +#, c-format +msgid "could not rewind hash-join temporary file: %m" +msgstr "" + +# executor/nodeHashjoin.c:699 executor/nodeHashjoin.c:704 +#: executor/nodeHashjoin.c:699 executor/nodeHashjoin.c:704 +#, c-format +msgid "could not write to hash-join temporary file: %m" +msgstr "" + +# executor/nodeMergejoin.c:1474 +#: executor/nodeMergejoin.c:1474 +msgid "RIGHT JOIN is only supported with merge-joinable join conditions" +msgstr "" + +# executor/nodeMergejoin.c:1491 optimizer/path/joinpath.c:839 +#: executor/nodeMergejoin.c:1491 optimizer/path/joinpath.c:839 +msgid "FULL JOIN is only supported with merge-joinable join conditions" +msgstr "" + +# executor/nodeSubplan.c:294 executor/nodeSubplan.c:336 +# executor/nodeSubplan.c:972 +#: executor/nodeSubplan.c:294 executor/nodeSubplan.c:336 +#: executor/nodeSubplan.c:972 +msgid "more than one row returned by a subquery used as an expression" +msgstr "" + +# executor/spi.c:190 +#: executor/spi.c:190 +msgid "transaction left non-empty SPI stack" +msgstr "" + +# executor/spi.c:191 executor/spi.c:255 +#: executor/spi.c:191 executor/spi.c:255 +msgid "Check for missing \"SPI_finish\" calls." +msgstr "" + +# executor/spi.c:254 +#: executor/spi.c:254 +msgid "subtransaction left non-empty SPI stack" +msgstr "" + +# executor/spi.c:831 +#: executor/spi.c:839 +msgid "cannot open multi-query plan as cursor" +msgstr "" + +# executor/spi.c:838 +#: executor/spi.c:846 +msgid "cannot open non-SELECT query as cursor" +msgstr "" + +# executor/spi.c:842 +#: executor/spi.c:850 +msgid "cannot open SELECT INTO query as cursor" +msgstr "" + +# executor/spi.c:1574 +#: executor/spi.c:1582 +#, c-format +msgid "SQL statement \"%s\"" +msgstr "SQL敘述\"%s\"" + +# libpq/be-fsstubs.c:132 libpq/be-fsstubs.c:170 libpq/be-fsstubs.c:194 +# libpq/be-fsstubs.c:222 libpq/be-fsstubs.c:274 +#: libpq/be-fsstubs.c:132 libpq/be-fsstubs.c:170 libpq/be-fsstubs.c:194 +#: libpq/be-fsstubs.c:222 libpq/be-fsstubs.c:274 +#, c-format +msgid "invalid large-object descriptor: %d" +msgstr "" + +# libpq/be-fsstubs.c:378 +#: libpq/be-fsstubs.c:378 +msgid "must be superuser to use server-side lo_import()" +msgstr "必須是管理者才能使用伺服端 lo_import()" + +# libpq/be-fsstubs.c:379 +#: libpq/be-fsstubs.c:379 +msgid "Anyone can use the client-side lo_import() provided by libpq." +msgstr "任何人都能使用 libpq 提供的客戶端 lo_import()。" + +# libpq/be-fsstubs.c:400 +#: libpq/be-fsstubs.c:400 +#, c-format +msgid "could not open server file \"%s\": %m" +msgstr "無法開啟伺服器檔案 \"%s\": %m" + +# libpq/be-fsstubs.c:421 +#: libpq/be-fsstubs.c:421 +#, c-format +msgid "could not read server file \"%s\": %m" +msgstr "無法讀取伺服器檔案\"%s\"：%m" + +# libpq/be-fsstubs.c:451 +#: libpq/be-fsstubs.c:451 +msgid "must be superuser to use server-side lo_export()" +msgstr "必須是管理者才能使用伺服端 lo_export()" + +# libpq/be-fsstubs.c:452 +#: libpq/be-fsstubs.c:452 +msgid "Anyone can use the client-side lo_export() provided by libpq." +msgstr "任何人都能使用 libpq 提供的客戶端 lo_export()。" + +# libpq/be-fsstubs.c:484 +#: libpq/be-fsstubs.c:484 +#, c-format +msgid "could not create server file \"%s\": %m" +msgstr "無法建立伺服器檔案\"%s\"：%m" + +# libpq/be-fsstubs.c:496 +#: libpq/be-fsstubs.c:496 +#, c-format +msgid "could not write server file \"%s\": %m" +msgstr "無法寫入伺服器檔案\"%s\"：%m" + +# libpq/auth.c:113 +#: libpq/auth.c:113 +#, c-format +msgid "Kerberos error: %s" +msgstr "Kerberos 錯誤: %s" + +# libpq/auth.c:119 +#: libpq/auth.c:119 +#, c-format +msgid "" +"unexpected Kerberos protocol version received from client (received \"%s\", " +"expected \"%s\")" +msgstr "" + +# libpq/auth.c:126 libpq/auth.c:306 +#: libpq/auth.c:126 libpq/auth.c:306 +#, c-format +msgid "" +"unexpected Kerberos user name received from client (received \"%s\", " +"expected \"%s\")" +msgstr "" + +# libpq/auth.c:140 +#: libpq/auth.c:140 +msgid "Kerberos 4 not implemented on this server" +msgstr "這個伺服器並未實作 Kerberos 4" + +# libpq/auth.c:201 +#: libpq/auth.c:201 +#, c-format +msgid "Kerberos initialization returned error %d" +msgstr "Kerberos 初始化傳回錯誤 %d" + +# libpq/auth.c:211 +#: libpq/auth.c:211 +#, c-format +msgid "Kerberos keytab resolving returned error %d" +msgstr "Kerberos keytab解析傳回錯誤%d" + +# libpq/auth.c:224 +#: libpq/auth.c:224 +#, c-format +msgid "Kerberos sname_to_principal(\"%s\") returned error %d" +msgstr "Kerberos sname_to_principal(\"%s\")傳回錯誤%d" + +# libpq/auth.c:269 +#: libpq/auth.c:269 +#, c-format +msgid "Kerberos recvauth returned error %d" +msgstr "Kerberos recvauth傳回錯誤%d" + +# libpq/auth.c:294 +#: libpq/auth.c:294 +#, c-format +msgid "Kerberos unparse_name returned error %d" +msgstr "Kerberos unparse_name傳回錯誤%d" + +# libpq/auth.c:327 +#: libpq/auth.c:327 +msgid "Kerberos 5 not implemented on this server" +msgstr "這個伺服器並未實作 Kerberos 5" + +# libpq/auth.c:366 +#: libpq/auth.c:366 +#, c-format +msgid "authentication failed for user \"%s\": host rejected" +msgstr "驗證使用者\"%s\"失敗：主機被拒絕" + +# libpq/auth.c:369 +#: libpq/auth.c:369 +#, c-format +msgid "Kerberos 4 authentication failed for user \"%s\"" +msgstr "Kerberos 4驗證使用者\"%s\"失敗" + +# libpq/auth.c:372 +#: libpq/auth.c:372 +#, c-format +msgid "Kerberos 5 authentication failed for user \"%s\"" +msgstr "Kerberos 5驗證使用者\"%s\"失敗" + +# libpq/auth.c:375 +#: libpq/auth.c:375 +#, c-format +msgid "\"trust\" authentication failed for user \"%s\"" +msgstr "\"trust\"驗證使用者\"%s\"失敗" + +# libpq/auth.c:378 +#: libpq/auth.c:378 +#, c-format +msgid "Ident authentication failed for user \"%s\"" +msgstr "Ident驗證使用者\"%s\"失敗" + +# libpq/auth.c:383 +#: libpq/auth.c:383 +#, c-format +msgid "password authentication failed for user \"%s\"" +msgstr "密碼驗證使用者\"%s\"失敗" + +# libpq/auth.c:387 +#: libpq/auth.c:387 +#, c-format +msgid "PAM authentication failed for user \"%s\"" +msgstr "PAM驗證使用者\"%s\"失敗" + +# libpq/auth.c:391 +#: libpq/auth.c:391 +#, c-format +msgid "authentication failed for user \"%s\": invalid authentication method" +msgstr "驗證使用者\"%s\"失敗：無效的驗證方式" + +# libpq/auth.c:420 +#: libpq/auth.c:420 +msgid "missing or erroneous pg_hba.conf file" +msgstr "找不到pg_hba.conf或內容不正確" + +# libpq/auth.c:421 +#: libpq/auth.c:421 +msgid "See server log for details." +msgstr "查看伺服器記錄檔以獲得詳細資料。" + +# libpq/auth.c:447 +#: libpq/auth.c:447 +#, c-format +msgid "no pg_hba.conf entry for host \"%s\", user \"%s\", database \"%s\", %s" +msgstr "" + +# libpq/auth.c:449 +#: libpq/auth.c:449 +msgid "SSL on" +msgstr "SSL 開啟" + +# libpq/auth.c:449 +#: libpq/auth.c:449 +msgid "SSL off" +msgstr "SSL 關閉" + +# libpq/auth.c:453 +#: libpq/auth.c:453 +#, c-format +msgid "no pg_hba.conf entry for host \"%s\", user \"%s\", database \"%s\"" +msgstr "" + +# libpq/auth.c:465 +#: libpq/auth.c:465 +msgid "Kerberos 4 only supports IPv4 connections" +msgstr "Kerberos 4 只支援 IPv4 連線" + +# libpq/auth.c:498 +#: libpq/auth.c:498 +#, c-format +msgid "could not enable credential reception: %m" +msgstr "" + +# libpq/auth.c:585 +#: libpq/auth.c:585 +#, c-format +msgid "error from underlying PAM layer: %s" +msgstr "" + +# libpq/auth.c:590 +#: libpq/auth.c:590 +#, c-format +msgid "unsupported PAM conversation %d/%s" +msgstr "" + +# libpq/auth.c:622 +#: libpq/auth.c:622 +msgid "empty password returned by client" +msgstr "" + +# libpq/auth.c:682 +#: libpq/auth.c:682 +#, c-format +msgid "could not create PAM authenticator: %s" +msgstr "" + +# libpq/auth.c:693 +#: libpq/auth.c:693 +#, c-format +msgid "pam_set_item(PAM_USER) failed: %s" +msgstr "" + +# libpq/auth.c:704 +#: libpq/auth.c:704 +#, c-format +msgid "pam_set_item(PAM_CONV) failed: %s" +msgstr "" + +# libpq/auth.c:715 +#: libpq/auth.c:715 +#, c-format +msgid "pam_authenticate failed: %s" +msgstr "pam_authenticate失敗：%s" + +# libpq/auth.c:726 +#: libpq/auth.c:726 +#, c-format +msgid "pam_acct_mgmt failed: %s" +msgstr "pam_acct_mgmt失敗：%s" + +# libpq/auth.c:737 +#: libpq/auth.c:737 +#, c-format +msgid "could not release PAM authenticator: %s" +msgstr "" + +# libpq/auth.c:775 +#: libpq/auth.c:775 +#, c-format +msgid "expected password response, got message type %d" +msgstr "" + +# libpq/auth.c:803 +#: libpq/auth.c:803 +msgid "invalid password packet size" +msgstr "無效的密碼封包大小" + +# libpq/auth.c:807 +#: libpq/auth.c:807 +msgid "received password packet" +msgstr "已接收密碼封包" + +# libpq/be-secure.c:281 libpq/be-secure.c:374 +#: libpq/be-secure.c:281 libpq/be-secure.c:374 +#, c-format +msgid "SSL SYSCALL error: %m" +msgstr "SSL SYSCALL 錯誤: %m" + +# libpq/be-secure.c:286 libpq/be-secure.c:379 +#: libpq/be-secure.c:286 libpq/be-secure.c:379 +msgid "SSL SYSCALL error: EOF detected" +msgstr "SSL SYSCALL 錯誤: 偵測到 EOF" + +# libpq/be-secure.c:294 libpq/be-secure.c:387 +#: libpq/be-secure.c:294 libpq/be-secure.c:387 +#, c-format +msgid "SSL error: %s" +msgstr "SSL 錯誤: %s" + +# libpq/be-secure.c:303 libpq/be-secure.c:396 +#: libpq/be-secure.c:303 libpq/be-secure.c:396 libpq/be-secure.c:813 +#, c-format +msgid "unrecognized SSL error code: %d" +msgstr "無法識別的SSL錯誤碼：%d" + +# libpq/be-secure.c:336 libpq/be-secure.c:340 libpq/be-secure.c:350 +#: libpq/be-secure.c:336 libpq/be-secure.c:340 libpq/be-secure.c:350 +msgid "SSL renegotiation failure" +msgstr "" + +# libpq/be-secure.c:344 +#: libpq/be-secure.c:344 +msgid "SSL failed to send renegotiation request" +msgstr "" + +# libpq/be-secure.c:649 +#: libpq/be-secure.c:649 +#, c-format +msgid "could not create SSL context: %s" +msgstr "無法建立SSL context：%s" + +# libpq/be-secure.c:659 +#: libpq/be-secure.c:659 +#, c-format +msgid "could not load server certificate file \"%s\": %s" +msgstr "無法載入伺服器憑證檔\"%s\"：%s" + +# libpq/be-secure.c:666 +#: libpq/be-secure.c:666 +#, c-format +msgid "could not access private key file \"%s\": %m" +msgstr "無法存取私鑰檔\"%s\"：%m" + +# libpq/be-secure.c:682 +#: libpq/be-secure.c:682 +#, c-format +msgid "unsafe permissions on private key file \"%s\"" +msgstr "私鑰檔\"%s\"的存取權限不安全" + +# libpq/be-secure.c:684 +#: libpq/be-secure.c:684 +msgid "" +"File must be owned by the database user and must have no permissions for " +"\"group\" or \"other\"." +msgstr "" + +# libpq/be-secure.c:689 +#: libpq/be-secure.c:689 +#, c-format +msgid "could not load private key file \"%s\": %s" +msgstr "無法載入私鑰檔\"%s\"：%s" + +# libpq/be-secure.c:694 +#: libpq/be-secure.c:694 +#, c-format +msgid "check of private key failed: %s" +msgstr "檢查私鑰失敗：%s" + +# libpq/be-secure.c:714 +#: libpq/be-secure.c:714 +#, c-format +msgid "could not load root certificate file \"%s\": %s" +msgstr "無法載入根憑證檔\"%s\"：%s" + +# libpq/be-secure.c:716 +#: libpq/be-secure.c:716 +msgid "Will not verify client certificates." +msgstr "" + +# libpq/be-secure.c:789 +#: libpq/be-secure.c:759 +#, c-format +msgid "could not initialize SSL connection: %s" +msgstr "無法初始化SSL連線：%s" + +# libpq/be-secure.c:798 +#: libpq/be-secure.c:768 +#, c-format +msgid "could not set SSL socket: %s" +msgstr "無法設定SSL socket：%s" + +# libpq/be-secure.c:807 +#: libpq/be-secure.c:793 +#, c-format +msgid "could not accept SSL connection: %m" +msgstr "無法接受SSL連線：%m" + +# libpq/be-secure.c:807 +#: libpq/be-secure.c:797 libpq/be-secure.c:808 +msgid "could not accept SSL connection: EOF detected" +msgstr "無法接受SSL連線：發現EOF" + +# libpq/be-secure.c:807 +#: libpq/be-secure.c:802 +#, c-format +msgid "could not accept SSL connection: %s" +msgstr "無法接受SSL連線：%s" + +# libpq/be-secure.c:832 +#: libpq/be-secure.c:840 +#, c-format +msgid "SSL connection from \"%s\"" +msgstr "SSL連線從\"%s\"" + +# libpq/crypt.c:62 +#: libpq/crypt.c:62 +msgid "" +"cannot use authentication method \"crypt\" because password is MD5-encrypted" +msgstr "" + +# libpq/hba.c:156 +#: libpq/hba.c:156 +#, c-format +msgid "authentication file token too long, skipping: \"%s\"" +msgstr "" + +# libpq/hba.c:325 +#: libpq/hba.c:324 +#, c-format +msgid "could not open secondary authentication file \"@%s\" as \"%s\": %m" +msgstr "" + +# libpq/hba.c:740 +#: libpq/hba.c:741 +#, c-format +msgid "invalid IP address \"%s\" in file \"%s\" line %d: %s" +msgstr "無效的IP位址\"%s\"於檔案\"%s\"列 %d：%s" + +# libpq/hba.c:775 +#: libpq/hba.c:776 +#, c-format +msgid "invalid IP mask \"%s\" in file \"%s\" line %d: %s" +msgstr "無效的IP遮罩\"%s\"於檔案\"%s\"列 %d：%s" + +# libpq/hba.c:790 +#: libpq/hba.c:791 +#, c-format +msgid "IP address and mask do not match in file \"%s\" line %d" +msgstr "" + +# libpq/hba.c:848 libpq/hba.c:1104 +#: libpq/hba.c:849 libpq/hba.c:1105 +#, c-format +msgid "invalid entry in file \"%s\" at line %d, token \"%s\"" +msgstr "" + +# libpq/hba.c:854 +#: libpq/hba.c:855 +#, c-format +msgid "missing field in file \"%s\" at end of line %d" +msgstr "" + +# guc-file.l:151 libpq/hba.c:1044 +#: guc-file.l:151 libpq/hba.c:1045 +#, c-format +msgid "could not open configuration file \"%s\": %m" +msgstr "無法開啟設定檔\"%s\"：%m" + +# libpq/hba.c:1110 +#: libpq/hba.c:1111 +#, c-format +msgid "missing entry in file \"%s\" at end of line %d" +msgstr "" + +# libpq/hba.c:1141 +#: libpq/hba.c:1142 +msgid "cannot use Ident authentication without usermap field" +msgstr "無法使用Ident驗證，沒有usermap欄位" + +# libpq/hba.c:1186 +#: libpq/hba.c:1187 +#, c-format +msgid "could not open Ident usermap file \"%s\": %m" +msgstr "無法開啟Ident usermap檔\"%s\"：%m" + +# libpq/hba.c:1364 +#: libpq/hba.c:1365 +#, c-format +msgid "could not create socket for Ident connection: %m" +msgstr "無法為Ident連線建立socket：%m" + +# libpq/hba.c:1380 +#: libpq/hba.c:1381 +#, c-format +msgid "could not bind to local address \"%s\": %m" +msgstr "無法bind至local位址\"%s\"：%m" + +# libpq/hba.c:1392 +#: libpq/hba.c:1393 +#, c-format +msgid "could not connect to Ident server at address \"%s\", port %s: %m" +msgstr "" + +# libpq/hba.c:1412 +#: libpq/hba.c:1413 +#, c-format +msgid "could not send query to Ident server at address \"%s\", port %s: %m" +msgstr "" + +# libpq/hba.c:1427 +#: libpq/hba.c:1428 +#, c-format +msgid "" +"could not receive response from Ident server at address \"%s\", port %s: %m" +msgstr "" + +# libpq/hba.c:1437 +#: libpq/hba.c:1438 +#, c-format +msgid "invalidly formatted response from Ident server: \"%s\"" +msgstr "" + +# libpq/hba.c:1472 libpq/hba.c:1503 libpq/hba.c:1571 +#: libpq/hba.c:1473 libpq/hba.c:1504 libpq/hba.c:1572 +#, c-format +msgid "could not get peer credentials: %m" +msgstr "" + +# libpq/hba.c:1481 libpq/hba.c:1512 libpq/hba.c:1582 +#: libpq/hba.c:1482 libpq/hba.c:1513 libpq/hba.c:1583 +#, c-format +msgid "local user with ID %d does not exist" +msgstr "本機使用者 ID %d 的使用者並不存在" + +# libpq/hba.c:1594 +#: libpq/hba.c:1595 +msgid "" +"Ident authentication is not supported on local connections on this platform" +msgstr "" + +# libpq/hba.c:1637 +#: libpq/hba.c:1638 +#, c-format +msgid "Ident protocol identifies remote user as \"%s\"" +msgstr "" + +# libpq/pqcomm.c:271 +#: libpq/pqcomm.c:271 +#, c-format +msgid "could not translate host name \"%s\", service \"%s\" to address: %s" +msgstr "" + +# libpq/pqcomm.c:275 +#: libpq/pqcomm.c:275 +#, c-format +msgid "could not translate service \"%s\" to address: %s" +msgstr "" + +# libpq/pqcomm.c:309 +#: libpq/pqcomm.c:309 +msgid "IPv4" +msgstr "IPv4" + +# libpq/pqcomm.c:313 +#: libpq/pqcomm.c:313 +msgid "IPv6" +msgstr "IPv6" + +# libpq/pqcomm.c:318 +#: libpq/pqcomm.c:318 +msgid "Unix" +msgstr "Unix" + +# libpq/pqcomm.c:323 +#: libpq/pqcomm.c:323 +#, c-format +msgid "unrecognized address family %d" +msgstr "無法識別的address family %d" + +# translator: %s is IPv4, IPv6, or Unix +# libpq/pqcomm.c:334 +#. translator: %s is IPv4, IPv6, or Unix +#: libpq/pqcomm.c:334 +#, c-format +msgid "could not create %s socket: %m" +msgstr "無法建立 %s socket：%m" + +# libpq/pqcomm.c:346 +#: libpq/pqcomm.c:346 +#, c-format +msgid "setsockopt(SO_REUSEADDR) failed: %m" +msgstr "setsockopt(SO_REUSEADDR)失敗：%m" + +# libpq/pqcomm.c:360 +#: libpq/pqcomm.c:360 +#, c-format +msgid "setsockopt(IPV6_V6ONLY) failed: %m" +msgstr "setsockopt(IPV6_V6ONLY)失敗：%m" + +# translator: %s is IPv4, IPv6, or Unix +# libpq/pqcomm.c:379 +#. translator: %s is IPv4, IPv6, or Unix +#: libpq/pqcomm.c:379 +#, c-format +msgid "could not bind %s socket: %m" +msgstr "無法bind %s socket：%m" + +# libpq/pqcomm.c:382 +#: libpq/pqcomm.c:382 +#, c-format +msgid "" +"Is another postmaster already running on port %d? If not, remove socket file " +"\"%s\" and retry." +msgstr "" + +# libpq/pqcomm.c:385 +#: libpq/pqcomm.c:385 +#, c-format +msgid "" +"Is another postmaster already running on port %d? If not, wait a few seconds " +"and retry." +msgstr "" + +# translator: %s is IPv4, IPv6, or Unix +# libpq/pqcomm.c:419 +#. translator: %s is IPv4, IPv6, or Unix +#: libpq/pqcomm.c:419 +#, c-format +msgid "could not listen on %s socket: %m" +msgstr "無法傾聽%s socket：%m" + +# libpq/pqcomm.c:509 +#: libpq/pqcomm.c:509 +#, c-format +msgid "could not set group of file \"%s\": %m" +msgstr "" + +# libpq/pqcomm.c:520 +#: libpq/pqcomm.c:520 +#, c-format +msgid "could not set permissions of file \"%s\": %m" +msgstr "無法設定檔案 \"%s\" 的權限: %m" + +# libpq/pqcomm.c:550 +#: libpq/pqcomm.c:550 +#, c-format +msgid "could not accept new connection: %m" +msgstr "無法接受新連線: %m" + +# libpq/pqcomm.c:702 +#: libpq/pqcomm.c:702 +#, c-format +msgid "could not receive data from client: %m" +msgstr "無法由客戶端接收資料: %m" + +# libpq/pqcomm.c:865 +#: libpq/pqcomm.c:895 +msgid "unexpected EOF within message length word" +msgstr "" + +# libpq/pqcomm.c:877 +#: libpq/pqcomm.c:906 +msgid "invalid message length" +msgstr "不合法的訊息長度" + +# libpq/pqcomm.c:891 +#: libpq/pqcomm.c:928 libpq/pqcomm.c:938 +msgid "incomplete message from client" +msgstr "用戶端傳送的訊息不完整" + +# libpq/pqcomm.c:1001 +#: libpq/pqcomm.c:1048 +#, c-format +msgid "could not send data to client: %m" +msgstr "無法傳送資料給用戶端：%m" + +# libpq/pqformat.c:443 +#: libpq/pqformat.c:443 +msgid "no data left in message" +msgstr "訊息中沒有資料" + +# libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630 +# utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523 +#: libpq/pqformat.c:591 libpq/pqformat.c:609 libpq/pqformat.c:630 +#: utils/adt/arrayfuncs.c:1277 utils/adt/rowtypes.c:523 +msgid "insufficient data left in message" +msgstr "訊息中的資料不足" + +# libpq/pqformat.c:671 +#: libpq/pqformat.c:671 +msgid "invalid string in message" +msgstr "訊息中有不合法的字串" + +# libpq/pqformat.c:687 +#: libpq/pqformat.c:687 +msgid "invalid message format" +msgstr "不合法的訊息格式" + +# main/main.c:99 +#: main/main.c:99 +#, c-format +msgid "%s: setsysinfo failed: %s\n" +msgstr "%s：setsysinfo失敗：%s\n" + +# main/main.c:117 +#: main/main.c:117 +#, c-format +msgid "%s: WSAStartup failed: %d\n" +msgstr "%s：WSAStartup失敗：%d\n" + +# main/main.c:220 +#: main/main.c:217 +msgid "" +"\"root\" execution of the PostgreSQL server is not permitted.\n" +"The server must be started under an unprivileged user ID to prevent\n" +"possible system security compromise. See the documentation for\n" +"more information on how to properly start the server.\n" +msgstr "" +"禁止以\"root\"執行PostgreSQL伺服器。\n" +"伺服器必須以非特權使用者身分啟動以避免可能的\n" +"系統安全問題，請參考說明文件以獲得有關如何正\n" +"確啟動伺服器的資訊。\n" + +# main/main.c:239 +#: main/main.c:236 +#, c-format +msgid "%s: real and effective user IDs must match\n" +msgstr "%s：真實使用者ID和有效使用者ID必須符合\n" + +# main/main.c:246 +#: main/main.c:243 +msgid "" +"Execution of PostgreSQL by a user with administrative permissions is not\n" +"permitted.\n" +"The server must be started under an unprivileged user ID to prevent\n" +"possible system security compromises. See the documentation for\n" +"more information on how to properly start the server.\n" +msgstr "" +"禁止以擁有系統管理者權限的使用者執行PostgreSQL。\n" +"伺服器必須以非特權使用者身分啟動以避免可能的系統\n" +"安全問題，請參考說明文件以獲得有關如何正確啟動伺\n" +"服器的資訊。\n" + +# main/main.c:306 +#: main/main.c:314 +#, c-format +msgid "%s: invalid effective UID: %d\n" +msgstr "%s：不合法的effective UID：%d\n" + +# main/main.c:319 +#: main/main.c:327 +#, c-format +msgid "%s: could not determine user name (GetUserName failed)\n" +msgstr "%s: 無法判斷使用者名稱 (GetUserName 失敗)\n" + +# nodes/params.c:114 +#: nodes/params.c:114 +#, c-format +msgid "no value found for parameter \"%s\"" +msgstr "未發現參數 \"%s\" 的值" + +# nodes/params.c:119 +#: nodes/params.c:119 +#, c-format +msgid "no value found for parameter %d" +msgstr "未發現參數 %d 的值" + +# optimizer/path/allpaths.c:223 +#: optimizer/path/allpaths.c:223 +msgid "SELECT FOR UPDATE is not supported for inheritance queries" +msgstr "" + +# optimizer/plan/initsplan.c:282 optimizer/prep/prepjointree.c:366 +#: optimizer/plan/initsplan.c:282 optimizer/prep/prepjointree.c:366 +msgid "UNION JOIN is not implemented" +msgstr "UNION JOIN尚未實做" + +# optimizer/plan/initsplan.c:339 +#: optimizer/plan/initsplan.c:339 +msgid "" +"SELECT FOR UPDATE cannot be applied to the nullable side of an outer join" +msgstr "" + +# optimizer/plan/initsplan.c:743 +#: optimizer/plan/initsplan.c:743 +#, c-format +msgid "could not identify an equality operator for types %s and %s" +msgstr "" + +# optimizer/plan/initsplan.c:756 +#: optimizer/plan/initsplan.c:756 +#, c-format +msgid "" +"equality operator for types %s and %s should be merge-joinable, but isn't" +msgstr "" + +# optimizer/plan/planner.c:641 parser/analyze.c:1933 parser/analyze.c:2099 +# parser/analyze.c:2706 +#: optimizer/plan/planner.c:641 parser/analyze.c:1945 parser/analyze.c:2111 +#: parser/analyze.c:2718 +msgid "SELECT FOR UPDATE is not allowed with UNION/INTERSECT/EXCEPT" +msgstr "" + +# optimizer/plan/planner.c:698 +#: optimizer/plan/planner.c:698 +msgid "SELECT FOR UPDATE is not allowed in subqueries" +msgstr "子查詢不能使用SELECT FOR UPDATE" + +# optimizer/util/clauses.c:2296 +#: optimizer/util/clauses.c:2348 +#, c-format +msgid "SQL function \"%s\" during inlining" +msgstr "" + +# parser/parse_clause.c:363 +#: parser/parse_clause.c:363 +#, c-format +msgid "JOIN/ON clause refers to \"%s\", which is not part of JOIN" +msgstr "" + +# gram.y:5166 parser/parse_clause.c:423 +#: gram.y:5161 parser/parse_clause.c:423 +msgid "subquery in FROM must have an alias" +msgstr "FROM中的子查詢要有別名" + +# parser/parse_clause.c:446 +#: parser/parse_clause.c:446 +msgid "subquery in FROM may not have SELECT INTO" +msgstr "FROM中的子查詢不能有SELECT INTO" + +# parser/parse_clause.c:468 +#: parser/parse_clause.c:468 +msgid "subquery in FROM may not refer to other relations of same query level" +msgstr "" + +# parser/parse_clause.c:527 +#: parser/parse_clause.c:527 +msgid "" +"function expression in FROM may not refer to other relations of same query " +"level" +msgstr "" + +# parser/parse_clause.c:539 +#: parser/parse_clause.c:539 +msgid "cannot use aggregate function in function expression in FROM" +msgstr "" + +# parser/parse_clause.c:759 +#: parser/parse_clause.c:759 +#, c-format +msgid "column name \"%s\" appears more than once in USING clause" +msgstr "" + +# parser/parse_clause.c:774 +#: parser/parse_clause.c:774 +#, c-format +msgid "common column name \"%s\" appears more than once in left table" +msgstr "" + +# parser/parse_clause.c:783 +#: parser/parse_clause.c:783 +#, c-format +msgid "column \"%s\" specified in USING clause does not exist in left table" +msgstr "" + +# parser/parse_clause.c:797 +#: parser/parse_clause.c:797 +#, c-format +msgid "common column name \"%s\" appears more than once in right table" +msgstr "" + +# parser/parse_clause.c:806 +#: parser/parse_clause.c:806 +#, c-format +msgid "column \"%s\" specified in USING clause does not exist in right table" +msgstr "" + +# parser/parse_clause.c:858 +#: parser/parse_clause.c:858 +#, c-format +msgid "column alias list for \"%s\" has too many entries" +msgstr "" + +# parser/parse_clause.c:1051 +#. translator: %s is name of a SQL construct, eg LIMIT +#: parser/parse_clause.c:1051 +#, c-format +msgid "argument of %s must not contain variables" +msgstr "" + +# parser/parse_clause.c:1059 +#. translator: %s is name of a SQL construct, eg LIMIT +#: parser/parse_clause.c:1059 +#, c-format +msgid "argument of %s must not contain aggregates" +msgstr "" + +# translator: %s is name of a SQL construct, eg LIMIT +# parser/parse_clause.c:1067 +#. translator: %s is name of a SQL construct, eg LIMIT +#: parser/parse_clause.c:1067 +#, c-format +msgid "argument of %s must not contain subqueries" +msgstr "" + +# translator: first %s is name of a SQL construct, eg ORDER BY +# parser/parse_clause.c:1179 +#: parser/parse_clause.c:1179 +#, c-format +msgid "%s \"%s\" is ambiguous" +msgstr "" + +# translator: %s is name of a SQL construct, eg ORDER BY +# parser/parse_clause.c:1201 +#. translator: %s is name of a SQL construct, eg ORDER BY +#: parser/parse_clause.c:1201 +#, c-format +msgid "non-integer constant in %s" +msgstr "" + +# parser/parse_clause.c:1218 +#. translator: %s is name of a SQL construct, eg ORDER BY +#: parser/parse_clause.c:1218 +#, c-format +msgid "%s position %d is not in select list" +msgstr "" + +# parser/parse_clause.c:1411 +#: parser/parse_clause.c:1411 +msgid "for SELECT DISTINCT, ORDER BY expressions must appear in select list" +msgstr "" + +# parser/parse_clause.c:1451 +#: parser/parse_clause.c:1451 +msgid "SELECT DISTINCT ON expressions must match initial ORDER BY expressions" +msgstr "" + +# catalog/heap.c:382 commands/tablecmds.c:2897 +#: parser/analyze.c:408 +#, c-format +msgid "target lists can have at most %d entries" +msgstr "目標列表最多可以有 %d 個項目" + +# parser/analyze.c:446 +#: parser/analyze.c:458 +msgid "CREATE VIEW specifies more column names than columns" +msgstr "" + +# parser/analyze.c:583 +#: parser/analyze.c:595 +msgid "INSERT ... SELECT may not specify INTO" +msgstr "" + +# parser/analyze.c:671 +#: parser/analyze.c:683 +msgid "INSERT has more expressions than target columns" +msgstr "" + +# parser/analyze.c:692 +#: parser/analyze.c:704 +msgid "INSERT has more target columns than expressions" +msgstr "" + +# parser/analyze.c:865 +#: parser/analyze.c:877 +#, c-format +msgid "%s will create implicit sequence \"%s\" for serial column \"%s.%s\"" +msgstr "" + +# parser/analyze.c:948 parser/analyze.c:958 +#: parser/analyze.c:960 parser/analyze.c:970 +#, c-format +msgid "" +"conflicting NULL/NOT NULL declarations for column \"%s\" of table \"%s\"" +msgstr "" + +# parser/analyze.c:968 +#: parser/analyze.c:980 +#, c-format +msgid "multiple default values specified for column \"%s\" of table \"%s\"" +msgstr "" + +# parser/analyze.c:1311 +#: parser/analyze.c:1323 +#, c-format +msgid "column \"%s\" appears twice in primary key constraint" +msgstr "欄位\"%s\"在主鍵constraint出現兩次" + +# parser/analyze.c:1316 +#: parser/analyze.c:1328 +#, c-format +msgid "column \"%s\" appears twice in unique constraint" +msgstr "欄位\"%s\"在unique constraint出現兩次" + +# parser/analyze.c:1499 +#: parser/analyze.c:1511 +msgid "index expression may not return a set" +msgstr "" + +# parser/analyze.c:1591 +#: parser/analyze.c:1603 +msgid "rule WHERE condition may not contain references to other relations" +msgstr "" + +# parser/analyze.c:1597 +#: parser/analyze.c:1609 +msgid "rule WHERE condition may not contain aggregate functions" +msgstr "" + +# parser/analyze.c:1668 +#: parser/analyze.c:1680 +msgid "" +"rules with WHERE conditions may only have SELECT, INSERT, UPDATE, or DELETE " +"actions" +msgstr "" + +# parser/analyze.c:1687 parser/analyze.c:1759 rewrite/rewriteHandler.c:177 +# rewrite/rewriteManip.c:749 rewrite/rewriteManip.c:805 +#: parser/analyze.c:1699 parser/analyze.c:1771 rewrite/rewriteHandler.c:177 +#: rewrite/rewriteManip.c:749 rewrite/rewriteManip.c:805 +msgid "conditional UNION/INTERSECT/EXCEPT statements are not implemented" +msgstr "" + +# parser/analyze.c:1705 +#: parser/analyze.c:1717 +msgid "ON SELECT rule may not use OLD" +msgstr "ON SELECT規則不能使用OLD" + +# parser/analyze.c:1709 +#: parser/analyze.c:1721 +msgid "ON SELECT rule may not use NEW" +msgstr "ON SELECT規則不能使用NEW" + +# parser/analyze.c:1718 +#: parser/analyze.c:1730 +msgid "ON INSERT rule may not use OLD" +msgstr "ON INSERT規則不能使用OLD" + +# parser/analyze.c:1724 +#: parser/analyze.c:1736 +msgid "ON DELETE rule may not use NEW" +msgstr "ON DELETE規則不能使用NEW" + +# parser/analyze.c:2056 +#: parser/analyze.c:2068 +msgid "" +"ORDER BY on a UNION/INTERSECT/EXCEPT result must be on one of the result " +"columns" +msgstr "" + +# parser/analyze.c:2094 +#: parser/analyze.c:2106 +msgid "INTO is only allowed on first SELECT of UNION/INTERSECT/EXCEPT" +msgstr "" + +# parser/analyze.c:2155 +#: parser/analyze.c:2167 +msgid "" +"UNION/INTERSECT/EXCEPT member statement may not refer to other relations of " +"same query level" +msgstr "" + +# parser/analyze.c:2210 +#: parser/analyze.c:2222 +#, c-format +msgid "each %s query must have the same number of columns" +msgstr "" + +# parser/analyze.c:2282 +#: parser/analyze.c:2294 +msgid "CREATE TABLE AS specifies too many column names" +msgstr "" + +# parser/analyze.c:2565 +#: parser/analyze.c:2577 +msgid "cannot specify both SCROLL and NO SCROLL" +msgstr "" + +# parser/analyze.c:2652 +#: parser/analyze.c:2664 +#, c-format +msgid "wrong number of parameters for prepared statement \"%s\"" +msgstr "" + +# parser/analyze.c:2654 +#: parser/analyze.c:2666 +#, c-format +msgid "Expected %d parameters but got %d." +msgstr "預期%d個參數，但是收到%d個。" + +# parser/analyze.c:2669 +#: parser/analyze.c:2681 +msgid "cannot use subquery in EXECUTE parameter" +msgstr "" + +# parser/analyze.c:2673 +#: parser/analyze.c:2685 +msgid "cannot use aggregate function in EXECUTE parameter" +msgstr "" + +# parser/analyze.c:2685 +#: parser/analyze.c:2697 +#, c-format +msgid "parameter $%d of type %s cannot be coerced to the expected type %s" +msgstr "" + +# parser/analyze.c:2710 +#: parser/analyze.c:2722 +msgid "SELECT FOR UPDATE is not allowed with DISTINCT clause" +msgstr "" + +# parser/analyze.c:2714 +#: parser/analyze.c:2726 +msgid "SELECT FOR UPDATE is not allowed with GROUP BY clause" +msgstr "" + +# parser/analyze.c:2718 +#: parser/analyze.c:2730 +msgid "SELECT FOR UPDATE is not allowed with aggregate functions" +msgstr "" + +# parser/analyze.c:2800 +#: parser/analyze.c:2812 +msgid "SELECT FOR UPDATE cannot be applied to a join" +msgstr "" + +# parser/analyze.c:2805 +#: parser/analyze.c:2817 +msgid "SELECT FOR UPDATE cannot be applied to NEW or OLD" +msgstr "" + +# parser/analyze.c:2810 +#: parser/analyze.c:2822 +msgid "SELECT FOR UPDATE cannot be applied to a function" +msgstr "" + +# parser/analyze.c:2823 +#: parser/analyze.c:2835 +#, c-format +msgid "relation \"%s\" in FOR UPDATE clause not found in FROM clause" +msgstr "" + +# parser/analyze.c:2870 +#: parser/analyze.c:2882 +msgid "misplaced DEFERRABLE clause" +msgstr "" + +# parser/analyze.c:2874 parser/analyze.c:2887 +#: parser/analyze.c:2886 parser/analyze.c:2899 +msgid "multiple DEFERRABLE/NOT DEFERRABLE clauses not allowed" +msgstr "" + +# parser/analyze.c:2883 +#: parser/analyze.c:2895 +msgid "misplaced NOT DEFERRABLE clause" +msgstr "" + +# gram.y:2369 gram.y:2384 parser/analyze.c:2894 parser/analyze.c:2918 +#: gram.y:2368 gram.y:2383 parser/analyze.c:2906 parser/analyze.c:2930 +msgid "constraint declared INITIALLY DEFERRED must be DEFERRABLE" +msgstr "" + +# parser/analyze.c:2901 +#: parser/analyze.c:2913 +msgid "misplaced INITIALLY DEFERRED clause" +msgstr "" + +# parser/analyze.c:2905 parser/analyze.c:2929 +#: parser/analyze.c:2917 parser/analyze.c:2941 +msgid "multiple INITIALLY IMMEDIATE/DEFERRED clauses not allowed" +msgstr "" + +# parser/analyze.c:2925 +#: parser/analyze.c:2937 +msgid "misplaced INITIALLY IMMEDIATE clause" +msgstr "" + +# parser/analyze.c:2978 +#: parser/analyze.c:2990 +#, c-format +msgid "" +"CREATE specifies a schema (%s) different from the one being created (%s)" +msgstr "" + +# parser/analyze.c:3132 parser/parse_coerce.c:221 parser/parse_expr.c:116 +# parser/parse_expr.c:122 +#: parser/analyze.c:3144 parser/parse_coerce.c:221 parser/parse_expr.c:116 +#: parser/parse_expr.c:122 +#, c-format +msgid "there is no parameter $%d" +msgstr "並沒有參數 $%d" + +# parser/analyze.c:3137 tcop/postgres.c:1194 +#: parser/analyze.c:3149 tcop/postgres.c:1204 +#, c-format +msgid "could not determine data type of parameter $%d" +msgstr "" + +# scan.l:312 +#: scan.l:312 +msgid "unterminated /* comment" +msgstr "未結束的 /* 註解" + +# scan.l:339 +#: scan.l:339 +msgid "unterminated bit string literal" +msgstr "未結束的位元字串實量" + +# scan.l:358 +#: scan.l:358 +msgid "unterminated hexadecimal string literal" +msgstr "未結束的十六進位字串實量" + +# scan.l:407 +#: scan.l:407 +msgid "unterminated quoted string" +msgstr "未結束的引號字串" + +# scan.l:441 +#: scan.l:441 +msgid "unterminated dollar-quoted string" +msgstr "" + +# scan.l:453 +#: scan.l:453 +msgid "zero-length delimited identifier" +msgstr "" + +# scan.l:466 +#: scan.l:466 +msgid "unterminated quoted identifier" +msgstr "" + +# translator: %s is typically "syntax error" +# scan.l:621 +#. translator: %s is typically "syntax error" +#: scan.l:621 +#, c-format +msgid "%s at end of input" +msgstr "在輸入末端發生 %s" + +# translator: first %s is typically "syntax error" +# scan.l:629 +#. translator: first %s is typically "syntax error" +#: scan.l:629 +#, c-format +msgid "%s at or near \"%s\"" +msgstr "在\"%s\"附近發生 %s" + +# parser/parse_agg.c:120 +#: parser/parse_agg.c:120 +msgid "aggregates not allowed in WHERE clause" +msgstr "" + +# parser/parse_agg.c:124 +#: parser/parse_agg.c:124 +msgid "aggregates not allowed in JOIN conditions" +msgstr "" + +# parser/parse_agg.c:143 +#: parser/parse_agg.c:143 +msgid "aggregates not allowed in GROUP BY clause" +msgstr "" + +# parser/parse_agg.c:316 +#: parser/parse_agg.c:316 +#, c-format +msgid "" +"column \"%s.%s\" must appear in the GROUP BY clause or be used in an " +"aggregate function" +msgstr "" + +# parser/parse_agg.c:321 +#: parser/parse_agg.c:321 +#, c-format +msgid "subquery uses ungrouped column \"%s.%s\" from outer query" +msgstr "" + +# parser/parse_relation.c:174 parser/parse_relation.c:189 +#: parser/parse_relation.c:174 parser/parse_relation.c:189 +#, c-format +msgid "table reference \"%s\" is ambiguous" +msgstr "" + +# parser/parse_relation.c:249 parser/parse_relation.c:264 +#: parser/parse_relation.c:249 parser/parse_relation.c:264 +#, c-format +msgid "table reference %u is ambiguous" +msgstr "" + +# parser/parse_relation.c:356 parser/parse_relation.c:368 +#: parser/parse_relation.c:356 parser/parse_relation.c:368 +#, c-format +msgid "table name \"%s\" specified more than once" +msgstr "" + +# parser/parse_relation.c:510 parser/parse_relation.c:609 +#: parser/parse_relation.c:510 parser/parse_relation.c:609 +#, c-format +msgid "column reference \"%s\" is ambiguous" +msgstr "" + +# parser/parse_relation.c:726 parser/parse_relation.c:925 +#: parser/parse_relation.c:726 parser/parse_relation.c:925 +#, c-format +msgid "table \"%s\" has %d columns available but %d columns specified" +msgstr "" + +# parser/parse_relation.c:997 +#: parser/parse_relation.c:997 +msgid "" +"a column definition list is only allowed for functions returning \"record\"" +msgstr "" + +# parser/parse_relation.c:1008 +#: parser/parse_relation.c:1008 +msgid "a column definition list is required for functions returning \"record\"" +msgstr "" + +# parser/parse_relation.c:1052 +#: parser/parse_relation.c:1047 +#, c-format +msgid "too many column aliases specified for function %s" +msgstr "" + +# catalog/pg_proc.c:487 +#: parser/parse_relation.c:1071 +#, c-format +msgid "function \"%s\" in FROM has unsupported return type %s" +msgstr "FROM條件使用的函式\"%s\"傳回不受支援的型別%s" + +# parser/parse_relation.c:2009 +#: parser/parse_relation.c:2003 +#, c-format +msgid "missing FROM-clause entry in subquery for table \"%s\"" +msgstr "" + +# parser/parse_relation.c:2014 +#: parser/parse_relation.c:2008 +#, c-format +msgid "missing FROM-clause entry for table \"%s\"" +msgstr "" + +# parser/parse_relation.c:2033 +#: parser/parse_relation.c:2027 +#, c-format +msgid "adding missing FROM-clause entry in subquery for table \"%s\"" +msgstr "" + +# parser/parse_relation.c:2038 +#: parser/parse_relation.c:2032 +#, c-format +msgid "adding missing FROM-clause entry for table \"%s\"" +msgstr "" + +# parser/parse_coerce.c:237 +#: parser/parse_coerce.c:237 +#, c-format +msgid "inconsistent types deduced for parameter $%d" +msgstr "" + +# parser/parse_coerce.c:676 parser/parse_coerce.c:703 +# parser/parse_coerce.c:719 parser/parse_coerce.c:733 +# parser/parse_expr.c:1654 +#: parser/parse_coerce.c:691 parser/parse_coerce.c:718 +#: parser/parse_coerce.c:734 parser/parse_coerce.c:748 +#: parser/parse_expr.c:1654 +#, c-format +msgid "cannot cast type %s to %s" +msgstr "無法將型別 %s 轉換成 %s" + +# parser/parse_coerce.c:706 +#: parser/parse_coerce.c:721 +msgid "Input has too few columns." +msgstr "輸入的欄位不足。" + +# parser/parse_coerce.c:722 +#: parser/parse_coerce.c:737 +#, c-format +msgid "Cannot cast type %s to %s in column %d." +msgstr "" + +# parser/parse_coerce.c:736 +#: parser/parse_coerce.c:751 +msgid "Input has too many columns." +msgstr "輸入的欄位過多。" + +# translator: first %s is name of a SQL construct, eg WHERE +# parser/parse_coerce.c:770 +#. translator: first %s is name of a SQL construct, eg WHERE +#: parser/parse_coerce.c:785 +#, c-format +msgid "argument of %s must be type boolean, not type %s" +msgstr "%s 的引數必須是boolean型別，而非%s型別" + +# translator: %s is name of a SQL construct, eg WHERE +# parser/parse_coerce.c:778 parser/parse_coerce.c:817 +#. translator: %s is name of a SQL construct, eg WHERE +#: parser/parse_coerce.c:793 parser/parse_coerce.c:832 +#, c-format +msgid "argument of %s must not return a set" +msgstr "%s 的引數不能傳回set" + +# translator: first %s is name of a SQL construct, eg LIMIT +# parser/parse_coerce.c:809 +#. translator: first %s is name of a SQL construct, eg LIMIT +#: parser/parse_coerce.c:824 +#, c-format +msgid "argument of %s must be type integer, not type %s" +msgstr "%s 的引數必須是integer型別，而非%s型別" + +# parser/parse_coerce.c:871 +#: parser/parse_coerce.c:886 +#, c-format +msgid "%s types %s and %s cannot be matched" +msgstr "" + +# translator: first %s is name of a SQL construct, eg CASE +# parser/parse_coerce.c:933 +#. translator: first %s is name of a SQL construct, eg CASE +#: parser/parse_coerce.c:948 +#, c-format +msgid "%s could not convert type %s to %s" +msgstr "%s 無法將型別 %s 轉換成 %s" + +# parser/parse_coerce.c:1109 +#: parser/parse_coerce.c:1124 +msgid "arguments declared \"anyelement\" are not all alike" +msgstr "" + +# parser/parse_coerce.c:1126 +#: parser/parse_coerce.c:1141 +msgid "arguments declared \"anyarray\" are not all alike" +msgstr "" + +# parser/parse_coerce.c:1155 parser/parse_coerce.c:1267 +# parser/parse_coerce.c:1294 +#: parser/parse_coerce.c:1170 parser/parse_coerce.c:1282 +#: parser/parse_coerce.c:1309 +#, c-format +msgid "argument declared \"anyarray\" is not an array but type %s" +msgstr "" + +# parser/parse_coerce.c:1172 +#: parser/parse_coerce.c:1187 +msgid "" +"argument declared \"anyarray\" is not consistent with argument declared " +"\"anyelement\"" +msgstr "" + +# parser/parse_coerce.c:1183 +#: parser/parse_coerce.c:1198 +msgid "" +"could not determine anyarray/anyelement type because input has type \"unknown" +"\"" +msgstr "" + +# parser/parse_coerce.c:1208 parser/parse_coerce.c:1225 +# parser/parse_coerce.c:1279 parser/parse_expr.c:794 parser/parse_expr.c:1350 +# parser/parse_expr.c:1389 parser/parse_oper.c:920 +#: parser/parse_coerce.c:1223 parser/parse_coerce.c:1240 +#: parser/parse_coerce.c:1294 parser/parse_expr.c:794 parser/parse_expr.c:1350 +#: parser/parse_expr.c:1389 parser/parse_oper.c:920 +#, c-format +msgid "could not find array type for data type %s" +msgstr "" + +# parser/parse_expr.c:361 +#: parser/parse_expr.c:361 +msgid "NULLIF requires = operator to yield boolean" +msgstr "" + +# parser/parse_expr.c:486 +#: parser/parse_expr.c:486 +msgid "subquery must return a column" +msgstr "子查婢必須傳回一個欄位" + +# parser/parse_expr.c:492 +#: parser/parse_expr.c:492 +msgid "subquery must return only one column" +msgstr "子查詢只能傳回一個欄位" + +# parser/parse_expr.c:549 +#: parser/parse_expr.c:549 +#, c-format +msgid "row comparison cannot use operator %s" +msgstr "記錄比較不能使用operator %s" + +# parser/parse_expr.c:576 +#: parser/parse_expr.c:576 +msgid "subquery has too many columns" +msgstr "子查詢的欄位太多" + +# parser/parse_expr.c:594 +#: parser/parse_expr.c:594 +#, c-format +msgid "operator %s must return type boolean, not type %s" +msgstr "operator %s必須傳回boolean型別，而非 %s 型別" + +# parser/parse_expr.c:597 parser/parse_expr.c:604 +#: parser/parse_expr.c:597 parser/parse_expr.c:604 +msgid "" +"The operator of a quantified predicate subquery must return type boolean." +msgstr "" + +# parser/parse_expr.c:602 +#: parser/parse_expr.c:602 +#, c-format +msgid "operator %s must not return a set" +msgstr "operator %s不能傳回set" + +# parser/parse_expr.c:614 +#: parser/parse_expr.c:614 +msgid "subquery has too few columns" +msgstr "子查詢的欄位不足" + +# parser/parse_expr.c:1688 parser/parse_expr.c:1767 +#: parser/parse_expr.c:1688 parser/parse_expr.c:1767 +msgid "unequal number of entries in row expression" +msgstr "" + +# parser/parse_expr.c:1709 +#: parser/parse_expr.c:1709 +#, c-format +msgid "operator %s is not supported for row expressions" +msgstr "" + +# parser/parse_expr.c:1804 +#: parser/parse_expr.c:1804 +msgid "IS DISTINCT FROM requires = operator to yield boolean" +msgstr "" + +# parser/parse_func.c:88 +#: parser/parse_func.c:88 +#, c-format +msgid "cannot pass more than %d arguments to a function" +msgstr "傳入函式的引數不能超過 %d 個" + +# parser/parse_func.c:165 +#: parser/parse_func.c:165 +#, c-format +msgid "%s(*) specified, but %s is not an aggregate function" +msgstr "%s(*)被使用，但是 %s 不是aggregate function" + +# parser/parse_func.c:171 +#: parser/parse_func.c:171 +#, c-format +msgid "DISTINCT specified, but %s is not an aggregate function" +msgstr "" + +# parser/parse_func.c:195 +#: parser/parse_func.c:195 +#, c-format +msgid "function %s is not unique" +msgstr "" + +# parser/parse_func.c:198 +#: parser/parse_func.c:198 +msgid "" +"Could not choose a best candidate function. You may need to add explicit " +"type casts." +msgstr "" + +# parser/parse_func.c:206 +#: parser/parse_func.c:206 +msgid "" +"No function matches the given name and argument types. You may need to add " +"explicit type casts." +msgstr "" + +# parser/parse_func.c:255 +#: parser/parse_func.c:255 +msgid "aggregates may not return sets" +msgstr "aggregates不能傳回sets" + +# parser/parse_func.c:1208 +#: parser/parse_func.c:1208 +#, c-format +msgid "column %s.%s does not exist" +msgstr "欄位 %s.%s 不存在" + +# parser/parse_func.c:1219 parser/parse_target.c:496 +#: parser/parse_func.c:1219 +#, c-format +msgid "column \"%s\" not found in data type %s" +msgstr "" + +# parser/parse_func.c:1224 +#: parser/parse_func.c:1224 +#, c-format +msgid "could not identify column \"%s\" in record data type" +msgstr "" + +# parser/parse_func.c:1229 +#: parser/parse_func.c:1229 +#, c-format +msgid "column notation .%s applied to type %s, which is not a composite type" +msgstr "" + +# parser/parse_func.c:1301 +#: parser/parse_func.c:1301 +#, c-format +msgid "aggregate %s(*) does not exist" +msgstr "aggregate %s(*)不存在" + +# parser/parse_func.c:1306 +#: parser/parse_func.c:1306 +#, c-format +msgid "aggregate %s(%s) does not exist" +msgstr "aggregate %s(%s)不存在" + +# parser/parse_func.c:1327 +#: parser/parse_func.c:1327 +#, c-format +msgid "function %s(%s) is not an aggregate" +msgstr "函式%s(%s)不是aggregate" + +# parser/parse_node.c:95 +#: parser/parse_node.c:95 +#, c-format +msgid "cannot subscript type %s because it is not an array" +msgstr "" + +# parser/parse_node.c:198 parser/parse_node.c:221 +#: parser/parse_node.c:198 parser/parse_node.c:221 +msgid "array subscript must have type integer" +msgstr "" + +# parser/parse_node.c:243 +#: parser/parse_node.c:243 +#, c-format +msgid "array assignment requires type %s but expression is of type %s" +msgstr "" + +# parser/parse_oper.c:84 parser/parse_oper.c:785 utils/adt/regproc.c:467 +# utils/adt/regproc.c:487 utils/adt/regproc.c:665 +#: parser/parse_oper.c:84 parser/parse_oper.c:785 utils/adt/regproc.c:467 +#: utils/adt/regproc.c:487 utils/adt/regproc.c:665 +#, c-format +msgid "operator does not exist: %s" +msgstr "operator不存在：%s" + +# parser/parse_oper.c:185 utils/adt/arrayfuncs.c:2581 +# utils/adt/ri_triggers.c:3641 +#: parser/parse_oper.c:185 utils/adt/arrayfuncs.c:2581 +#: utils/adt/ri_triggers.c:3642 +#, c-format +msgid "could not identify an equality operator for type %s" +msgstr "" + +# parser/parse_oper.c:249 parser/parse_oper.c:314 +#: parser/parse_oper.c:249 parser/parse_oper.c:314 +#, c-format +msgid "could not identify an ordering operator for type %s" +msgstr "" + +# parser/parse_oper.c:251 parser/parse_oper.c:316 +#: parser/parse_oper.c:251 parser/parse_oper.c:316 +msgid "Use an explicit ordering operator or modify the query." +msgstr "" + +# parser/parse_oper.c:584 +#: parser/parse_oper.c:584 +#, c-format +msgid "operator requires run-time type coercion: %s" +msgstr "" + +# parser/parse_oper.c:778 +#: parser/parse_oper.c:778 +#, c-format +msgid "operator is not unique: %s" +msgstr "" + +# parser/parse_oper.c:780 +#: parser/parse_oper.c:780 +msgid "" +"Could not choose a best candidate operator. You may need to add explicit " +"type casts." +msgstr "" + +# parser/parse_oper.c:787 +#: parser/parse_oper.c:787 +msgid "" +"No operator matches the given name and argument type(s). You may need to add " +"explicit type casts." +msgstr "" + +# parser/parse_oper.c:877 +#: parser/parse_oper.c:877 +msgid "op ANY/ALL (array) requires array on right side" +msgstr "" + +# parser/parse_oper.c:906 +#: parser/parse_oper.c:906 +msgid "op ANY/ALL (array) requires operator to yield boolean" +msgstr "" + +# parser/parse_oper.c:910 +#: parser/parse_oper.c:910 +msgid "op ANY/ALL (array) requires operator not to return a set" +msgstr "" + +# parser/parse_target.c:268 parser/parse_target.c:501 +#: parser/parse_target.c:268 parser/parse_target.c:503 +#, c-format +msgid "cannot assign to system column \"%s\"" +msgstr "" + +# parser/parse_target.c:292 +#: parser/parse_target.c:292 +msgid "cannot set an array element to DEFAULT" +msgstr "" + +# parser/parse_target.c:296 +#: parser/parse_target.c:296 +msgid "cannot set a subfield to DEFAULT" +msgstr "" + +# parser/parse_target.c:357 +#: parser/parse_target.c:357 +#, c-format +msgid "column \"%s\" is of type %s but expression is of type %s" +msgstr "" + +#: parser/parse_target.c:489 +#, c-format +msgid "" +"cannot assign to field \"%s\" of column \"%s\" because its type %s is not a " +"composite type" +msgstr "" + +#: parser/parse_target.c:497 +#, c-format +msgid "" +"cannot assign to field \"%s\" of column \"%s\" because there is no such " +"column in data type %s" +msgstr "" + +# parser/parse_target.c:565 +#: parser/parse_target.c:567 +#, c-format +msgid "" +"array assignment to \"%s\" requires type %s but expression is of type %s" +msgstr "" + +# parser/parse_target.c:574 +#: parser/parse_target.c:576 +#, c-format +msgid "subfield \"%s\" is of type %s but expression is of type %s" +msgstr "" + +# parser/parse_target.c:803 +#: parser/parse_target.c:805 +msgid "SELECT * with no tables specified is not valid" +msgstr "" + +# y.tab.c:9591 +#: y.tab.c:9499 +msgid "syntax error: cannot back up" +msgstr "" + +# gram.y:990 gram.y:1016 +#: gram.y:989 gram.y:1015 +msgid "time zone interval must be HOUR or HOUR TO MINUTE" +msgstr "time zone interval必須是HOUR或HOUR TO MINUTE" + +# gram.y:1001 gram.y:5474 gram.y:7537 +#: gram.y:1000 gram.y:5469 gram.y:7540 +#, c-format +msgid "INTERVAL(%d) precision must not be negative" +msgstr "" + +# gram.y:1007 gram.y:5480 gram.y:7543 +#: gram.y:1006 gram.y:5475 gram.y:7546 +#, c-format +msgid "INTERVAL(%d) precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:1887 utils/adt/ri_triggers.c:301 utils/adt/ri_triggers.c:363 +# utils/adt/ri_triggers.c:542 utils/adt/ri_triggers.c:781 +# utils/adt/ri_triggers.c:972 utils/adt/ri_triggers.c:1133 +# utils/adt/ri_triggers.c:1317 utils/adt/ri_triggers.c:1486 +# utils/adt/ri_triggers.c:1667 utils/adt/ri_triggers.c:1837 +# utils/adt/ri_triggers.c:2055 utils/adt/ri_triggers.c:2235 +# utils/adt/ri_triggers.c:2440 utils/adt/ri_triggers.c:2536 +# utils/adt/ri_triggers.c:2659 +#: gram.y:1886 utils/adt/ri_triggers.c:302 utils/adt/ri_triggers.c:364 +#: utils/adt/ri_triggers.c:543 utils/adt/ri_triggers.c:782 +#: utils/adt/ri_triggers.c:973 utils/adt/ri_triggers.c:1134 +#: utils/adt/ri_triggers.c:1318 utils/adt/ri_triggers.c:1487 +#: utils/adt/ri_triggers.c:1668 utils/adt/ri_triggers.c:1838 +#: utils/adt/ri_triggers.c:2056 utils/adt/ri_triggers.c:2236 +#: utils/adt/ri_triggers.c:2441 utils/adt/ri_triggers.c:2537 +#: utils/adt/ri_triggers.c:2660 +msgid "MATCH PARTIAL not yet implemented" +msgstr "MATCH PARTIAL尚未實做" + +# gram.y:1977 +#: gram.y:1976 +msgid "CREATE TABLE AS may not specify INTO" +msgstr "" + +# gram.y:2436 +#: gram.y:2435 +msgid "CREATE ASSERTION is not yet implemented" +msgstr "CREATE ASSERTION尚未實做" + +# gram.y:2452 +#: gram.y:2451 +msgid "DROP ASSERTION is not yet implemented" +msgstr "DROP ASSERTION尚未實做" + +# gram.y:3328 +#: gram.y:3323 +msgid "CREATE FUNCTION / OUT parameters are not implemented" +msgstr "" + +# gram.y:3335 +#: gram.y:3330 +msgid "CREATE FUNCTION / INOUT parameters are not implemented" +msgstr "" + +# gram.y:3496 utils/adt/regproc.c:639 +#: gram.y:3491 utils/adt/regproc.c:639 +msgid "missing argument" +msgstr "缺少引數" + +# gram.y:3497 utils/adt/regproc.c:640 +#: gram.y:3492 utils/adt/regproc.c:640 +msgid "Use NONE to denote the missing argument of a unary operator." +msgstr "" + +# gram.y:4545 +#: gram.y:4540 +msgid "column name list not allowed in CREATE TABLE / AS EXECUTE" +msgstr "" + +# gram.y:5016 +#: gram.y:5011 +msgid "LIMIT #,# syntax is not supported" +msgstr "LIMIT #,# 語法不被支援" + +# gram.y:5017 +#: gram.y:5012 +msgid "Use separate LIMIT and OFFSET clauses." +msgstr "" + +# gram.y:5167 +#: gram.y:5162 +msgid "For example, FROM (SELECT ...) [AS] foo." +msgstr "" + +# gram.y:5577 +#: gram.y:5572 +msgid "precision for type float must be at least 1 bit" +msgstr "float型別的精確度至少要有1個位元" + +# gram.y:5585 +#: gram.y:5580 +msgid "precision for type float must be less than 54 bits" +msgstr "float型別的精確度不能少於54個位元" + +# gram.y:5599 gram.y:5614 +#: gram.y:5594 gram.y:5609 +#, c-format +msgid "NUMERIC precision %d must be between 1 and %d" +msgstr "NUMERIC的精確度%d必須在1和%d之間" + +# gram.y:5604 +#: gram.y:5599 +#, c-format +msgid "NUMERIC scale %d must be between 0 and precision %d" +msgstr "" + +# gram.y:5632 gram.y:5647 +#: gram.y:5627 gram.y:5642 +#, c-format +msgid "DECIMAL precision %d must be between 1 and %d" +msgstr "DECIMAL的精確度%d必須在1和%d之間" + +# gram.y:5637 +#: gram.y:5632 +#, c-format +msgid "DECIMAL scale %d must be between 0 and precision %d" +msgstr "" + +# gram.y:5697 gram.y:5775 +#: gram.y:5692 gram.y:5770 +#, c-format +msgid "length for type %s must be at least 1" +msgstr "%s 型別的長度必須至少為1" + +# gram.y:5702 gram.y:5780 +#: gram.y:5697 gram.y:5775 +#, c-format +msgid "length for type %s cannot exceed %d" +msgstr "%s 型別的長度不能超過 %d" + +# gram.y:5853 +#: gram.y:5848 +#, c-format +msgid "TIMESTAMP(%d)%s precision must not be negative" +msgstr "" + +# gram.y:5859 +#: gram.y:5854 +#, c-format +msgid "TIMESTAMP(%d)%s precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:5894 +#: gram.y:5889 +#, c-format +msgid "TIME(%d)%s precision must not be negative" +msgstr "" + +# gram.y:5900 +#: gram.y:5895 +#, c-format +msgid "TIME(%d)%s precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:6354 +#: gram.y:6349 +msgid "UNIQUE predicate is not yet implemented" +msgstr "" + +# gram.y:6637 +#: gram.y:6632 +#, c-format +msgid "CURRENT_TIME(%d) precision must not be negative" +msgstr "" + +# gram.y:6643 +#: gram.y:6638 +#, c-format +msgid "CURRENT_TIME(%d) precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:6691 +#: gram.y:6686 +#, c-format +msgid "CURRENT_TIMESTAMP(%d) precision must not be negative" +msgstr "" + +# gram.y:6697 +#: gram.y:6692 +#, c-format +msgid "CURRENT_TIMESTAMP(%d) precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:6744 +#: gram.y:6739 +#, c-format +msgid "LOCALTIME(%d) precision must not be negative" +msgstr "" + +# gram.y:6750 +#: gram.y:6745 +#, c-format +msgid "LOCALTIME(%d) precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:6798 +#: gram.y:6793 +#, c-format +msgid "LOCALTIMESTAMP(%d) precision must not be negative" +msgstr "" + +# gram.y:6804 +#: gram.y:6799 +#, c-format +msgid "LOCALTIMESTAMP(%d) precision reduced to maximum allowed, %d" +msgstr "" + +# gram.y:7984 +#: gram.y:7987 +msgid "OLD used in query that is not in a rule" +msgstr "" + +# gram.y:7993 +#: gram.y:7996 +msgid "NEW used in query that is not in a rule" +msgstr "" + +# y.tab.c:19171 +#: y.tab.c:19078 +msgid "syntax error; also virtual memory exhausted" +msgstr "" + +# gram.y:8218 gram.y:8220 y.tab.c:19175 +#: gram.y:8221 gram.y:8223 gram.y:8240 gram.y:8242 y.tab.c:19082 +msgid "syntax error" +msgstr "語法錯誤" + +# y.tab.c:19289 +#: y.tab.c:19196 +msgid "parser stack overflow" +msgstr "" + +# gram.y:8192 +#: gram.y:8195 +msgid "wrong number of parameters on left side of OVERLAPS expression" +msgstr "" + +# gram.y:8198 +#: gram.y:8201 +msgid "wrong number of parameters on right side of OVERLAPS expression" +msgstr "" + +# gram.y:8277 +#: gram.y:8299 +msgid "multiple ORDER BY clauses not allowed" +msgstr "" + +# gram.y:8285 +#: gram.y:8307 +msgid "multiple FOR UPDATE clauses not allowed" +msgstr "" + +# gram.y:8293 +#: gram.y:8315 +msgid "multiple OFFSET clauses not allowed" +msgstr "" + +# gram.y:8301 +#: gram.y:8323 +msgid "multiple LIMIT clauses not allowed" +msgstr "" + +# parser/parse_type.c:62 +#: parser/parse_type.c:62 +#, c-format +msgid "improper %%TYPE reference (too few dotted names): %s" +msgstr "" + +# parser/parse_type.c:83 +#: parser/parse_type.c:83 +#, c-format +msgid "improper %%TYPE reference (too many dotted names): %s" +msgstr "" + +# parser/parse_type.c:103 +#: parser/parse_type.c:103 +#, c-format +msgid "type reference %s converted to %s" +msgstr "" + +# parser/parse_type.c:206 parser/parse_type.c:237 utils/cache/typcache.c:155 +#: parser/parse_type.c:206 parser/parse_type.c:237 utils/cache/typcache.c:155 +#, c-format +msgid "type \"%s\" is only a shell" +msgstr "" + +# parser/parse_type.c:372 parser/parse_type.c:467 +#: parser/parse_type.c:372 parser/parse_type.c:467 +#, c-format +msgid "invalid type name \"%s\"" +msgstr "不合法的型別名稱\"%s\"" + +# parser/scansup.c:182 +#: parser/scansup.c:182 +#, c-format +msgid "identifier \"%s\" will be truncated to \"%.*s\"" +msgstr "" + +# port/pg_shmem.c:94 port/sysv_shmem.c:94 +#: port/pg_shmem.c:101 port/sysv_shmem.c:101 +#, c-format +msgid "could not create shared memory segment: %m" +msgstr "無法建立共享記憶區段：%m" + +# port/pg_shmem.c:95 port/sysv_shmem.c:95 +#: port/pg_shmem.c:102 port/sysv_shmem.c:102 +#, c-format +msgid "Failed system call was shmget(key=%lu, size=%u, 0%o)." +msgstr "失敗的系統呼叫是shmget(key=%lu，size=%u，0%o)。" + +# port/pg_shmem.c:99 port/sysv_shmem.c:99 +#: port/pg_shmem.c:106 port/sysv_shmem.c:106 +#, c-format +msgid "" +"This error usually means that PostgreSQL's request for a shared memory " +"segment exceeded your kernel's SHMMAX parameter. You can either reduce the " +"request size or reconfigure the kernel with larger SHMMAX. To reduce the " +"request size (currently %u bytes), reduce PostgreSQL's shared_buffers " +"parameter (currently %d) and/or its max_connections parameter (currently %" +"d).\n" +"If the request size is already small, it's possible that it is less than " +"your kernel's SHMMIN parameter, in which case raising the request size or " +"reconfiguring SHMMIN is called for.\n" +"The PostgreSQL documentation contains more information about shared memory " +"configuration." +msgstr "" + +# port/pg_shmem.c:112 port/sysv_shmem.c:112 +#: port/pg_shmem.c:119 port/sysv_shmem.c:119 +#, c-format +msgid "" +"This error usually means that PostgreSQL's request for a shared memory " +"segment exceeded available memory or swap space. To reduce the request size " +"(currently %u bytes), reduce PostgreSQL's shared_buffers parameter " +"(currently %d) and/or its max_connections parameter (currently %d).\n" +"The PostgreSQL documentation contains more information about shared memory " +"configuration." +msgstr "" + +# port/pg_shmem.c:121 port/sysv_shmem.c:121 +#: port/pg_shmem.c:128 port/sysv_shmem.c:128 +#, c-format +msgid "" +"This error does *not* mean that you have run out of disk space. It occurs " +"either if all available shared memory IDs have been taken, in which case you " +"need to raise the SHMMNI parameter in your kernel, or because the system's " +"overall limit for shared memory has been reached. If you cannot increase " +"the shared memory limit, reduce PostgreSQL's shared memory request " +"(currently %u bytes), by reducing its shared_buffers parameter (currently %" +"d) and/or its max_connections parameter (currently %d).\n" +"The PostgreSQL documentation contains more information about shared memory " +"configuration." +msgstr "" + +# access/transam/slru.c:967 commands/tablespace.c:577 +# commands/tablespace.c:721 +#: port/pg_shmem.c:408 port/sysv_shmem.c:408 +#, c-format +msgid "could not stat data directory \"%s\": %m" +msgstr "無法讀取目錄\"%s\"：%m" + +# port/win32/security.c:39 +#: port/win32/security.c:43 +#, c-format +msgid "could not open process token: error code %d\n" +msgstr "無法開啟行程token：錯誤碼%d\n" + +# port/win32/security.c:89 +#: port/win32/security.c:63 +#, c-format +msgid "could not get SID for Administrators group: error code %d\n" +msgstr "無法取得群組Administrators的SID：錯誤碼%d\n" + +# port/win32/security.c:89 +#: port/win32/security.c:72 +#, c-format +msgid "could not get SID for PowerUsers group: error code %d\n" +msgstr "無法取得群組PowerUsers的SID：錯誤碼%d\n" + +# port/win32/signal.c:239 +#: port/win32/signal.c:173 +#, c-format +msgid "could not create signal listener pipe for pid %d: error code %d" +msgstr "無法為pid %d建立信號傾聽pipe，錯誤碼%d" + +# port/win32/signal.c:239 +#: port/win32/signal.c:253 +#, c-format +msgid "could not create signal listener pipe: error code %d; retrying\n" +msgstr "無法建立信號傾聽pipe：錯誤碼%d，重試中\n" + +# port/win32/signal.c:239 +#: port/win32/signal.c:266 +#, c-format +msgid "could not create signal dispatch thread: error code %d\n" +msgstr "無法建立信號派送執行緒：錯誤碼%d\n" + +# port/pg_sema.c:117 port/sysv_sema.c:117 +#: port/pg_sema.c:117 port/sysv_sema.c:117 +#, c-format +msgid "could not create semaphores: %m" +msgstr "無法建立semaphores：%m" + +# port/pg_sema.c:118 port/sysv_sema.c:118 +#: port/pg_sema.c:118 port/sysv_sema.c:118 +#, c-format +msgid "Failed system call was semget(%lu, %d, 0%o)." +msgstr "" + +# port/pg_sema.c:122 port/sysv_sema.c:122 +#: port/pg_sema.c:122 port/sysv_sema.c:122 +#, c-format +msgid "" +"This error does *not* mean that you have run out of disk space.\n" +"It occurs when either the system limit for the maximum number of semaphore " +"sets (SEMMNI), or the system wide maximum number of semaphores (SEMMNS), " +"would be exceeded. You need to raise the respective kernel parameter. " +"Alternatively, reduce PostgreSQL's consumption of semaphores by reducing its " +"max_connections parameter (currently %d).\n" +"The PostgreSQL documentation contains more information about configuring " +"your system for PostgreSQL." +msgstr "" + +# port/pg_sema.c:151 port/sysv_sema.c:151 +#: port/pg_sema.c:151 port/sysv_sema.c:151 +#, c-format +msgid "" +"You possibly need to raise your kernel's SEMVMX value to be at least %d. " +"Look into the PostgreSQL documentation for details." +msgstr "" + +# postmaster/postmaster.c:387 +#: postmaster/postmaster.c:450 +#, c-format +msgid "%s: assert checking is not compiled in\n" +msgstr "%s：編譯時未加入assert檢查\n" + +# postmaster/postmaster.c:512 postmaster/postmaster.c:525 +#: postmaster/postmaster.c:566 postmaster/postmaster.c:579 +#, c-format +msgid "Try \"%s --help\" for more information.\n" +msgstr "執行\"%s --help\"顯示更多資訊。\n" + +# postmaster/postmaster.c:523 +#: postmaster/postmaster.c:577 +#, c-format +msgid "%s: invalid argument: \"%s\"\n" +msgstr "%s：不合法的引數：\"%s\"\n" + +# postmaster/postmaster.c:550 +#: postmaster/postmaster.c:604 +#, c-format +msgid "" +"%s: the number of buffers (-B) must be at least twice the number of allowed " +"connections (-N) and at least 16\n" +msgstr "%s：暫存區數量(-B)至少要是連線數(-N)的2倍或至少為16。\n" + +# postmaster/postmaster.c:556 +#: postmaster/postmaster.c:610 +#, c-format +msgid "%s: superuser_reserved_connections must be less than max_connections\n" +msgstr "%s：superuser_reserved_connections必須小於max_connections\n" + +# postmaster/postmaster.c:565 +#: postmaster/postmaster.c:619 +#, c-format +msgid "%s: invalid datetoken tables, please fix\n" +msgstr "" + +# postmaster/postmaster.c:599 +#: postmaster/postmaster.c:653 +#, c-format +msgid "%s: could not locate matching postgres executable" +msgstr "%s：找不到符合的postgres執行檔" + +# postmaster/postmaster.c:666 +#: postmaster/postmaster.c:720 +msgid "invalid list syntax for \"listen_addresses\"" +msgstr "\"listen_addresses\"的list語法錯誤" + +# postmaster/postmaster.c:685 +#: postmaster/postmaster.c:739 +#, c-format +msgid "could not create listen socket for \"%s\"" +msgstr "無法為\"%s\"建立接受連線的socket" + +# postmaster/postmaster.c:714 +#: postmaster/postmaster.c:768 +msgid "could not create Unix-domain socket" +msgstr "無法建立Unix-domain socket" + +# postmaster/postmaster.c:722 +#: postmaster/postmaster.c:776 +msgid "no socket created for listening" +msgstr "接受連線用的socket未被建立" + +# postmaster/postmaster.c:799 +#: postmaster/postmaster.c:853 +#, c-format +msgid "%s: could not write external PID file \"%s\": %s\n" +msgstr "" + +# postmaster/postmaster.c:892 +#: postmaster/postmaster.c:946 +#, c-format +msgid "data directory \"%s\" does not exist" +msgstr "資料目錄\"%s\"不存在" + +# postmaster/postmaster.c:897 +#: postmaster/postmaster.c:951 +#, c-format +msgid "could not read permissions of directory \"%s\": %m" +msgstr "無法讀取目錄\"%s\"的權限：%m" + +# postmaster/postmaster.c:912 +#: postmaster/postmaster.c:966 +#, c-format +msgid "data directory \"%s\" has group or world access" +msgstr "資料目錄\"%s\"可以被群組或其他使用者存取" + +# postmaster/postmaster.c:914 +#: postmaster/postmaster.c:968 +msgid "Permissions should be u=rwx (0700)." +msgstr "權限必須是 u=rwx (0700)。" + +# postmaster/postmaster.c:925 +#: postmaster/postmaster.c:979 +#, c-format +msgid "" +"%s: could not find the database system\n" +"Expected to find it in the directory \"%s\",\n" +"but could not open file \"%s\": %s\n" +msgstr "" +"%s 找不到資料庫系統。\n" +"預期在目錄\"%s\"中，\n" +"但是無法開啟檔案\"%s\"：%s\n" +"\n" + +# postmaster/postmaster.c:970 +#: postmaster/postmaster.c:1024 +#, c-format +msgid "%s: could not fork background process: %s\n" +msgstr "%s：無法建立背景行程：%s\n" + +# postmaster/postmaster.c:992 +#: postmaster/postmaster.c:1046 +#, c-format +msgid "%s: could not dissociate from controlling TTY: %s\n" +msgstr "%s：無法從控制TTY分離：%s\n" + +# postmaster/postmaster.c:1015 +#: postmaster/postmaster.c:1069 +#, c-format +msgid "" +"%s is the PostgreSQL server.\n" +"\n" +msgstr "" +"%s 是PostgreSQL伺服器。\n" +"\n" + +# postmaster/postmaster.c:1016 +#: postmaster/postmaster.c:1070 +#, c-format +msgid "" +"Usage:\n" +" %s [OPTION]...\n" +"\n" +msgstr "" +"使用方法：\n" +" %s [選項]...\n" +"\n" + +# postmaster/postmaster.c:1017 tcop/postgres.c:2115 +#: postmaster/postmaster.c:1071 tcop/postgres.c:2125 +msgid "Options:\n" +msgstr "選項：\n" + +# postmaster/postmaster.c:1019 tcop/postgres.c:2117 +#: postmaster/postmaster.c:1073 tcop/postgres.c:2127 +msgid " -A 1|0 enable/disable run-time assert checking\n" +msgstr " -A 1|0 打開/關閉執行時期assert檢查\n" + +# postmaster/postmaster.c:1021 tcop/postgres.c:2119 +#: postmaster/postmaster.c:1075 tcop/postgres.c:2129 +msgid " -B NBUFFERS number of shared buffers\n" +msgstr " -B NBUFFERS 共享暫存區的數量\n" + +# postmaster/postmaster.c:1022 tcop/postgres.c:2120 +#: postmaster/postmaster.c:1076 tcop/postgres.c:2130 +msgid " -c NAME=VALUE set run-time parameter\n" +msgstr " -c NAME=VALUE 設讚執行時期參數\n" + +# postmaster/postmaster.c:1023 +#: postmaster/postmaster.c:1077 +msgid " -d 1-5 debugging level\n" +msgstr " -d 1-5 除錯等級\n" + +# postmaster/postmaster.c:1024 tcop/postgres.c:2122 +#: postmaster/postmaster.c:1078 tcop/postgres.c:2132 +msgid " -D DATADIR database directory\n" +msgstr " -D DATADIR 資料庫目錄\n" + +# postmaster/postmaster.c:1025 tcop/postgres.c:2125 +#: postmaster/postmaster.c:1079 tcop/postgres.c:2135 +msgid " -F turn fsync off\n" +msgstr " -F 關閉fsync\n" + +# postmaster/postmaster.c:1026 +#: postmaster/postmaster.c:1080 +msgid " -h HOSTNAME host name or IP address to listen on\n" +msgstr " -h HOSTNAME 要傾聽的主機名稱或IP位址\n" + +# postmaster/postmaster.c:1027 +#: postmaster/postmaster.c:1081 +msgid " -i enable TCP/IP connections\n" +msgstr " -i 啟用TCP/IP連線\n" + +# postmaster/postmaster.c:1028 +#: postmaster/postmaster.c:1082 +msgid " -k DIRECTORY Unix-domain socket location\n" +msgstr " -k DIRECTORY Unix-domain socket的位置\n" + +# postmaster/postmaster.c:1030 +#: postmaster/postmaster.c:1084 +msgid " -l enable SSL connections\n" +msgstr " -l 啟用SSL連線\n" + +# postmaster/postmaster.c:1032 +#: postmaster/postmaster.c:1086 +msgid " -N MAX-CONNECT maximum number of allowed connections\n" +msgstr " -N MAX-CONNECT 允許的最大連接數\n" + +# postmaster/postmaster.c:1033 +#: postmaster/postmaster.c:1087 +msgid " -o OPTIONS pass \"OPTIONS\" to each server process\n" +msgstr " -o OPTIONS 將\"OPTIONS\"傳給每一個伺服器行程\n" + +# postmaster/postmaster.c:1034 +#: postmaster/postmaster.c:1088 +msgid " -p PORT port number to listen on\n" +msgstr " -p 埠號 要傾聽的埠號\n" + +# postmaster/postmaster.c:1035 +#: postmaster/postmaster.c:1089 +msgid "" +" -S silent mode (start in background without logging output)\n" +msgstr " -S 安靜模式(在背景啟動且不顯示訊息)\n" + +# postmaster/postmaster.c:1036 tcop/postgres.c:2132 +#: postmaster/postmaster.c:1090 tcop/postgres.c:2142 +msgid " --help show this help, then exit\n" +msgstr " --help 顯示這份說明然後結束\n" + +# postmaster/postmaster.c:1037 tcop/postgres.c:2133 +#: postmaster/postmaster.c:1091 tcop/postgres.c:2143 +msgid " --version output version information, then exit\n" +msgstr " --version 顯示版本資訊然後結束\n" + +# postmaster/postmaster.c:1039 tcop/postgres.c:2134 +#: postmaster/postmaster.c:1093 tcop/postgres.c:2144 +msgid "" +"\n" +"Developer options:\n" +msgstr "" +"\n" +"開發人員選項：\n" + +# postmaster/postmaster.c:1040 +#: postmaster/postmaster.c:1094 +msgid "" +" -n do not reinitialize shared memory after abnormal exit\n" +msgstr " -n 異常結束之後不重新初始化共享記憶體\n" + +# postmaster/postmaster.c:1041 +#: postmaster/postmaster.c:1095 +msgid " -s send SIGSTOP to all backend servers if one dies\n" +msgstr " -s 只要有一個後結束就向所有後端發送SIGSTOP\n" + +# postmaster/postmaster.c:1043 +#: postmaster/postmaster.c:1097 +msgid "" +"\n" +"Please read the documentation for the complete list of run-time\n" +"configuration settings and how to set them on the command line or in\n" +"the configuration file.\n" +"\n" +"Report bugs to .\n" +msgstr "" +"\n" +"請參考說明文件取得執行時期參數設定的完整列表以及如\n" +"何在命令列或者在設定檔裡設定它們的詳細資訊。\n" +"\n" +"回報錯誤給。\n" + +# postmaster/postmaster.c:1105 +#: postmaster/postmaster.c:1159 +#, c-format +msgid "select() failed in postmaster: %m" +msgstr "postmaster中select()失敗：%m" + +# postmaster/postmaster.c:1256 postmaster/postmaster.c:1287 +#: postmaster/postmaster.c:1310 postmaster/postmaster.c:1341 +msgid "incomplete startup packet" +msgstr "起始封包不完整" + +# postmaster/postmaster.c:1268 +#: postmaster/postmaster.c:1322 +msgid "invalid length of startup packet" +msgstr "起始封包的長度不正確" + +# postmaster/postmaster.c:1320 +#: postmaster/postmaster.c:1374 +#, c-format +msgid "failed to send SSL negotiation response: %m" +msgstr "傳送SSL交談回應失敗：%m" + +# postmaster/postmaster.c:1349 +#: postmaster/postmaster.c:1403 +#, c-format +msgid "unsupported frontend protocol %u.%u: server supports %u.0 to %u.%u" +msgstr "" + +# postmaster/postmaster.c:1413 +#: postmaster/postmaster.c:1467 +msgid "invalid startup packet layout: expected terminator as last byte" +msgstr "" + +# postmaster/postmaster.c:1442 +#: postmaster/postmaster.c:1496 +msgid "no PostgreSQL user name specified in startup packet" +msgstr "起始封包中未指定PostgreSQL使用者" + +# postmaster/postmaster.c:1495 +#: postmaster/postmaster.c:1549 +msgid "the database system is starting up" +msgstr "資料庫系統正在啟動" + +# postmaster/postmaster.c:1500 +#: postmaster/postmaster.c:1554 +msgid "the database system is shutting down" +msgstr "資料庫系統正在關閉" + +# postmaster/postmaster.c:1505 +#: postmaster/postmaster.c:1559 +msgid "the database system is in recovery mode" +msgstr "資料庫系統正在復原模式" + +# postmaster/postmaster.c:1510 storage/ipc/sinval.c:105 +# storage/lmgr/proc.c:246 +#: postmaster/postmaster.c:1564 storage/ipc/sinval.c:105 +#: storage/lmgr/proc.c:246 +msgid "sorry, too many clients already" +msgstr "對不起，用戶端過多" + +# postmaster/postmaster.c:1737 +#: postmaster/postmaster.c:1791 +msgid "received SIGHUP, reloading configuration files" +msgstr "收到SIGHUP，重新載入設定檔" + +# postmaster/postmaster.c:1789 +#: postmaster/postmaster.c:1843 +msgid "received smart shutdown request" +msgstr "收到智慧型關閉的要求" + +# postmaster/postmaster.c:1825 +#: postmaster/postmaster.c:1879 +msgid "received fast shutdown request" +msgstr "收到快速關閉的要求" + +# postmaster/postmaster.c:1832 +#: postmaster/postmaster.c:1886 +msgid "aborting any active transactions" +msgstr "中止任何進行中的交易" + +# postmaster/postmaster.c:1870 +#: postmaster/postmaster.c:1924 +msgid "received immediate shutdown request" +msgstr "收到立即關閉的要求" + +# postmaster/postmaster.c:1943 +#: postmaster/postmaster.c:1997 +msgid "startup process" +msgstr "啟動行程" + +# postmaster/postmaster.c:1946 +#: postmaster/postmaster.c:2000 +msgid "aborting startup due to startup process failure" +msgstr "啟動行程失敗，中止啟動" + +# postmaster/postmaster.c:2009 +#: postmaster/postmaster.c:2063 +msgid "background writer process" +msgstr "background writer行程" + +# postmaster/postmaster.c:2022 +#: postmaster/postmaster.c:2076 +msgid "archiver process" +msgstr "備份器行程" + +# postmaster/postmaster.c:2039 +#: postmaster/postmaster.c:2093 +msgid "statistics collector process" +msgstr "統計資料收集器行程" + +# postmaster/postmaster.c:2053 +#: postmaster/postmaster.c:2107 +msgid "system logger process" +msgstr "系統logger行程" + +# postmaster/postmaster.c:2074 +#: postmaster/postmaster.c:2128 +msgid "all server processes terminated; reinitializing" +msgstr "所有伺服器行程已中止，重新初始化" + +# postmaster/postmaster.c:2120 postmaster/postmaster.c:2130 +#: postmaster/postmaster.c:2174 postmaster/postmaster.c:2184 +msgid "server process" +msgstr "伺服器行程" + +# postmaster/postmaster.c:2175 +#: postmaster/postmaster.c:2229 +msgid "terminating any other active server processes" +msgstr "中止所有運行中的伺服器行程" + +# postmaster/postmaster.c:2272 +#: postmaster/postmaster.c:2326 +#, c-format +msgid "%s (PID %d) exited with exit code %d" +msgstr "" + +# postmaster/postmaster.c:2281 +#: postmaster/postmaster.c:2335 +#, c-format +msgid "%s (PID %d) was terminated by signal %d" +msgstr "" + +# postmaster/postmaster.c:2290 +#: postmaster/postmaster.c:2344 +#, c-format +msgid "%s (PID %d) exited with unexpected status %d" +msgstr "" + +# postmaster/postmaster.c:2415 +#: postmaster/postmaster.c:2469 +#, c-format +msgid "could not fork new process for connection: %m" +msgstr "無法為連線建立新行程：%m" + +# postmaster/postmaster.c:2454 +#: postmaster/postmaster.c:2508 +msgid "could not fork new process for connection: " +msgstr "無法為連線建立新行程：" + +# postmaster/postmaster.c:2594 +#: postmaster/postmaster.c:2647 +#, c-format +msgid "getnameinfo_all() failed: %s" +msgstr "getnameinfo_all()失敗：%s" + +# postmaster/postmaster.c:2603 +#: postmaster/postmaster.c:2656 +#, c-format +msgid "connection received: host=%s port=%s" +msgstr "連線已接收：host=%s port=%s" + +# postmaster/postmaster.c:2675 +#: postmaster/postmaster.c:2728 +#, c-format +msgid "connection authorized: user=%s database=%s" +msgstr "連線已授權：user=%s database=%s" + +# postmaster/postmaster.c:2849 +#: postmaster/postmaster.c:2946 +#, c-format +msgid "could not execute server process \"%s\": %m" +msgstr "無法執行伺服器行程\"%s\"：%m" + +# postmaster/postmaster.c:3256 +#: postmaster/postmaster.c:3540 +#, c-format +msgid "could not fork startup process: %m" +msgstr "無法fork啟動行程：%m" + +# postmaster/postmaster.c:3260 +#: postmaster/postmaster.c:3544 +#, c-format +msgid "could not fork background writer process: %m" +msgstr "無法建立 background writer 行程：%m" + +# postmaster/postmaster.c:3264 +#: postmaster/postmaster.c:3548 +#, c-format +msgid "could not fork process: %m" +msgstr "無法建立行程: %m" + +# port/win32/security.c:39 +#: postmaster/postmaster.c:3722 +#, c-format +msgid "could not duplicate socket %d for use in backend: error code %d" +msgstr "無法複製socket %d供後端使用：錯誤碼%d" + +# port/win32/signal.c:239 +#: postmaster/postmaster.c:3751 +#, c-format +msgid "could not create inherited socket: error code %d\n" +msgstr "無法建立inherited socket：錯誤碼%d\n" + +# utils/init/miscinit.c:792 utils/misc/guc.c:5074 +#: postmaster/postmaster.c:3779 postmaster/postmaster.c:3786 +#, c-format +msgid "could not read from backend variables file \"%s\": %s\n" +msgstr "無法讀取後端變數檔\"%s\"：%s\n" + +# access/transam/xlog.c:1944 access/transam/xlog.c:5453 +# access/transam/xlog.c:5607 postmaster/postmaster.c:3504 +#: postmaster/postmaster.c:3795 +#, c-format +msgid "could not remove file \"%s\": %s\n" +msgstr "無法刪除檔案\"%s\"：%s\n" + +# postmaster/postmaster.c:3762 +#: postmaster/postmaster.c:3810 +#, c-format +msgid "could not map view of backend variables: error code %d\n" +msgstr "" + +# postmaster/postmaster.c:3762 +#: postmaster/postmaster.c:3819 +#, c-format +msgid "could not unmap view of backend variables: error code %d\n" +msgstr "" + +# port/win32/security.c:52 port/win32/security.c:69 +#: postmaster/postmaster.c:3826 +#, c-format +msgid "could not close handle to backend parameter variables: error code %d\n" +msgstr "" + +# postmaster/postmaster.c:3762 +#: postmaster/postmaster.c:4065 +#, c-format +msgid "could not wait on child process handle: error code %d\n" +msgstr "無法等待子行程handle：錯誤碼%d\n" + +# postmaster/bgwriter.c:336 +#: postmaster/bgwriter.c:336 +#, c-format +msgid "checkpoints are occurring too frequently (%d seconds apart)" +msgstr "" + +# postmaster/bgwriter.c:338 +#: postmaster/bgwriter.c:338 +msgid "" +"Consider increasing the configuration parameter \"checkpoint_segments\"." +msgstr "" + +# postmaster/bgwriter.c:490 +#: postmaster/bgwriter.c:490 +msgid "not enough shared memory for background writer" +msgstr "" + +# postmaster/bgwriter.c:555 +#: postmaster/bgwriter.c:555 +msgid "checkpoint request failed" +msgstr "檢查點請求失敗" + +# libpq/auth.c:421 +#: postmaster/bgwriter.c:556 +msgid "Consult the server log for details." +msgstr "查看伺服器記錄檔以獲得詳細資料。" + +# postmaster/pgarch.c:164 +#: postmaster/pgarch.c:164 +#, c-format +msgid "could not fork archiver: %m" +msgstr "" + +#: postmaster/pgarch.c:391 +#, c-format +msgid "transaction log file \"%s\" could not be archived: too many failures" +msgstr "" + +# postmaster/pgarch.c:475 +#: postmaster/pgarch.c:474 +#, c-format +msgid "archive command \"%s\" failed: return code %d" +msgstr "" + +# postmaster/pgarch.c:480 +#: postmaster/pgarch.c:479 +#, c-format +msgid "archived transaction log file \"%s\"" +msgstr "" + +# postmaster/pgarch.c:526 +#: postmaster/pgarch.c:525 +#, c-format +msgid "could not open archive status directory \"%s\": %m" +msgstr "" + +# postmaster/pgarch.c:565 +#: postmaster/pgarch.c:564 +#, c-format +msgid "could not read archive status directory \"%s\": %m" +msgstr "" + +# postmaster/pgstat.c:257 +#: postmaster/pgstat.c:259 +#, c-format +msgid "could not resolve \"localhost\": %s" +msgstr "無法解析\"localhost\"：%s" + +# postmaster/pgstat.c:285 +#: postmaster/pgstat.c:287 +#, c-format +msgid "could not create socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:297 +#: postmaster/pgstat.c:299 +#, c-format +msgid "could not bind socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:308 +#: postmaster/pgstat.c:310 +#, c-format +msgid "could not get address of socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:324 +#: postmaster/pgstat.c:326 +#, c-format +msgid "could not connect socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:341 +#: postmaster/pgstat.c:343 +#, c-format +msgid "could not send test message on socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:366 postmaster/pgstat.c:1610 +#: postmaster/pgstat.c:368 postmaster/pgstat.c:1567 +#, c-format +msgid "select() failed in statistics collector: %m" +msgstr "在統計資料收集器中 select() 失敗: %m" + +# postmaster/pgstat.c:381 +#: postmaster/pgstat.c:383 +msgid "test message did not get through on socket for statistics collector" +msgstr "" + +# postmaster/pgstat.c:393 +#: postmaster/pgstat.c:395 +#, c-format +msgid "could not receive test message on socket for statistics collector: %m" +msgstr "" + +# postmaster/pgstat.c:403 +#: postmaster/pgstat.c:405 +msgid "incorrect test message transmission on socket for statistics collector" +msgstr "" + +# postmaster/pgstat.c:418 +#: postmaster/pgstat.c:420 +msgid "disabling statistics collector for lack of working socket" +msgstr "沒有可用的socket，停用統計資料收集器" + +# postmaster/pgstat.c:432 +#: postmaster/pgstat.c:434 +#, c-format +msgid "could not set statistics collector socket to nonblocking mode: %m" +msgstr "無法將統計資料收集器 socket 設為非阻擋模式：%m" + +# postmaster/pgstat.c:571 +#: postmaster/pgstat.c:567 +msgid "statistics collector startup skipped" +msgstr "跳過統計資料收集器啟動程序" + +# postmaster/pgstat.c:605 +#: postmaster/pgstat.c:601 +#, c-format +msgid "could not fork statistics buffer: %m" +msgstr "無法 fork 統計資料緩衝區：%m" + +# postmaster/pgstat.c:963 +#: postmaster/pgstat.c:959 +msgid "must be superuser to reset statistics counters" +msgstr "只有管理者能重設統計資料計數器" + +# postmaster/pgstat.c:1411 +#: postmaster/pgstat.c:1381 +#, c-format +msgid "could not create pipe for statistics buffer: %m" +msgstr "無法為統計資料緩衝區建立管道：%m" + +# postmaster/pgstat.c:1424 +#: postmaster/pgstat.c:1393 +#, c-format +msgid "could not fork statistics collector: %m" +msgstr "無法fork統計資料收集器：%m" + +# postmaster/pgstat.c:1652 +#: postmaster/pgstat.c:1608 +#, c-format +msgid "could not read from statistics collector pipe: %m" +msgstr "無法由統計資料收集器管道讀取資料: %m" + +# postmaster/pgstat.c:1674 +#: postmaster/pgstat.c:1629 +msgid "invalid statistics message length" +msgstr "無效的統計資料訊息長度" + +# postmaster/pgstat.c:1821 +#: postmaster/pgstat.c:1774 +#, c-format +msgid "could not set statistics collector pipe to nonblocking mode: %m" +msgstr "無法將統計資料收集器管道設為非阻擋模式: %m" + +# postmaster/pgstat.c:1861 +#: postmaster/pgstat.c:1805 +msgid "statistics buffer is full" +msgstr "統計資料緩衝區已滿" + +# postmaster/pgstat.c:1892 +#: postmaster/pgstat.c:1836 +#, c-format +msgid "select() failed in statistics buffer: %m" +msgstr "在統計資料緩衝區中 select() 失敗: %m" + +# postmaster/pgstat.c:1908 +#: postmaster/pgstat.c:1850 +#, c-format +msgid "could not read statistics message: %m" +msgstr "無法讀取統計資料訊息: %m" + +# postmaster/pgstat.c:1973 +#: postmaster/pgstat.c:1913 +#, c-format +msgid "could not write to statistics collector pipe: %m" +msgstr "無法寫至統計資料收集器的管道：%m" + +# postmaster/pgstat.c:2039 +#: postmaster/pgstat.c:1988 +#, c-format +msgid "invalid server process ID %d" +msgstr "不合法的伺服器行程ID %d" + +# postmaster/pgstat.c:1537 postmaster/pgstat.c:1550 postmaster/pgstat.c:1833 +# postmaster/pgstat.c:2099 postmaster/pgstat.c:2131 postmaster/pgstat.c:2185 +# postmaster/pgstat.c:2446 postmaster/pgstat.c:2519 postmaster/pgstat.c:2565 +# postmaster/pgstat.c:2616 postmaster/pgstat.c:2866 postmaster/pgstat.c:3048 +#: postmaster/pgstat.c:2047 postmaster/pgstat.c:2122 postmaster/pgstat.c:2720 +msgid "out of memory in statistics collector --- abort" +msgstr "統計資料收集器記憶體用盡 --- 中止" + +# postmaster/pgstat.c:2234 +#: postmaster/pgstat.c:2170 +#, c-format +msgid "could not open temporary statistics file \"%s\": %m" +msgstr "無法開啟統計資料暫存檔 \"%s\": %m" + +# postmaster/pgstat.c:2261 +#: postmaster/pgstat.c:2196 +msgid "database hash table corrupted during cleanup --- abort" +msgstr "" + +# postmaster/pgstat.c:2298 +#: postmaster/pgstat.c:2231 +#, c-format +msgid "tables hash table for database %u corrupted during cleanup --- abort" +msgstr "" + +# postmaster/pgstat.c:2347 +#: postmaster/pgstat.c:2279 +#, c-format +msgid "could not close temporary statistics file \"%s\": %m" +msgstr "無法關閉統計資料暫存檔 \"%s\": %m" + +# postmaster/pgstat.c:2356 +#: postmaster/pgstat.c:2288 +#, c-format +msgid "could not rename temporary statistics file \"%s\" to \"%s\": %m" +msgstr "無法將統計資料暫存檔由 \"%s\" 更名為 \"%s\": %m" + +# postmaster/pgstat.c:2378 +#: postmaster/pgstat.c:2310 +msgid "dead-server-process hash table corrupted during cleanup --- abort" +msgstr "" + +# postmaster/pgstat.c:2501 postmaster/pgstat.c:2533 postmaster/pgstat.c:2596 +# postmaster/pgstat.c:2629 postmaster/pgstat.c:2650 postmaster/pgstat.c:2696 +# postmaster/pgstat.c:2729 +#: postmaster/pgstat.c:2417 postmaster/pgstat.c:2437 postmaster/pgstat.c:2483 +#: postmaster/pgstat.c:2504 postmaster/pgstat.c:2521 postmaster/pgstat.c:2555 +#: postmaster/pgstat.c:2584 +msgid "corrupted pgstat.stat file" +msgstr "" + +# postmaster/syslogger.c:317 +#: postmaster/syslogger.c:317 +#, c-format +msgid "select() failed in logger process: %m" +msgstr "select() 在logger行程中失敗：%m" + +# postmaster/syslogger.c:329 postmaster/syslogger.c:734 +#: postmaster/syslogger.c:329 postmaster/syslogger.c:734 +#, c-format +msgid "could not read from logger pipe: %m" +msgstr "無法讀取logger pipe：%m" + +# postmaster/syslogger.c:361 +#: postmaster/syslogger.c:361 +msgid "logger shutting down" +msgstr "正在關閉logger" + +# postmaster/syslogger.c:405 +#: postmaster/syslogger.c:405 postmaster/syslogger.c:419 +#, c-format +msgid "could not create pipe for syslog: %m" +msgstr "無法為syslog建立管道：%m" + +# postmaster/syslogger.c:447 +#: postmaster/syslogger.c:447 +#, c-format +msgid "could not create log file \"%s\": %m" +msgstr "無法建立log檔\"%s\"：%m" + +# postmaster/syslogger.c:477 +#: postmaster/syslogger.c:477 +#, c-format +msgid "could not fork system logger: %m" +msgstr "無法 fork 系統logger：%m" + +# postmaster/syslogger.c:509 +#: postmaster/syslogger.c:509 +#, c-format +msgid "could not redirect stdout: %m" +msgstr "無法重導向stdout：%m" + +# postmaster/syslogger.c:514 postmaster/syslogger.c:527 +#: postmaster/syslogger.c:514 postmaster/syslogger.c:527 +#, c-format +msgid "could not redirect stderr: %m" +msgstr "無法重導向stderr：%m" + +# postmaster/syslogger.c:703 +#: postmaster/syslogger.c:703 +#, c-format +msgid "could not write to log file: %m" +msgstr "無法寫入log檔：%m" + +# postmaster/syslogger.c:790 +#: postmaster/syslogger.c:790 +#, c-format +msgid "could not open new log file \"%s\": %m" +msgstr "無法開啟新log檔\"%s\"：%m" + +# postmaster/syslogger.c:802 +#: postmaster/syslogger.c:802 +msgid "disabling automatic rotation (use SIGHUP to reenable)" +msgstr "" + +# rewrite/rewriteDefine.c:104 rewrite/rewriteDefine.c:589 +#: rewrite/rewriteDefine.c:104 rewrite/rewriteDefine.c:589 +#, c-format +msgid "rule \"%s\" for relation \"%s\" already exists" +msgstr "" + +# rewrite/rewriteDefine.c:234 +#: rewrite/rewriteDefine.c:234 +msgid "rule actions on OLD are not implemented" +msgstr "" + +# rewrite/rewriteDefine.c:235 +#: rewrite/rewriteDefine.c:235 +msgid "Use views or triggers instead." +msgstr "改用 views 或 triggers。" + +# rewrite/rewriteDefine.c:239 +#: rewrite/rewriteDefine.c:239 +msgid "rule actions on NEW are not implemented" +msgstr "" + +# rewrite/rewriteDefine.c:240 +#: rewrite/rewriteDefine.c:240 +msgid "Use triggers instead." +msgstr "改用 triggers。" + +# rewrite/rewriteDefine.c:257 +#: rewrite/rewriteDefine.c:257 +msgid "INSTEAD NOTHING rules on SELECT are not implemented" +msgstr "" + +# rewrite/rewriteDefine.c:258 +#: rewrite/rewriteDefine.c:258 +msgid "Use views instead." +msgstr "改用 views。" + +# rewrite/rewriteDefine.c:266 +#: rewrite/rewriteDefine.c:266 +msgid "multiple actions for rules on SELECT are not implemented" +msgstr "" + +# rewrite/rewriteDefine.c:275 +#: rewrite/rewriteDefine.c:275 +msgid "rules on SELECT must have action INSTEAD SELECT" +msgstr "" + +# rewrite/rewriteDefine.c:283 +#: rewrite/rewriteDefine.c:283 +msgid "event qualifications are not implemented for rules on SELECT" +msgstr "" + +# rewrite/rewriteDefine.c:303 +#: rewrite/rewriteDefine.c:303 +msgid "SELECT rule's target list has too many entries" +msgstr "" + +# rewrite/rewriteDefine.c:319 +#: rewrite/rewriteDefine.c:319 +msgid "cannot convert relation containing dropped columns to view" +msgstr "" + +# rewrite/rewriteDefine.c:324 +#: rewrite/rewriteDefine.c:324 +#, c-format +msgid "SELECT rule's target entry %d has different column name from \"%s\"" +msgstr "" + +# rewrite/rewriteDefine.c:329 +#: rewrite/rewriteDefine.c:329 +#, c-format +msgid "SELECT rule's target entry %d has different type from column \"%s\"" +msgstr "" + +# rewrite/rewriteDefine.c:342 +#: rewrite/rewriteDefine.c:342 +#, c-format +msgid "SELECT rule's target entry %d has different size from column \"%s\"" +msgstr "" + +# rewrite/rewriteDefine.c:348 +#: rewrite/rewriteDefine.c:348 +msgid "SELECT rule's target list has too few entries" +msgstr "" + +# rewrite/rewriteDefine.c:363 +#: rewrite/rewriteDefine.c:363 +#, c-format +msgid "\"%s\" is already a view" +msgstr "\"%s\"已經是view" + +# rewrite/rewriteDefine.c:387 +#: rewrite/rewriteDefine.c:387 +#, c-format +msgid "view rule for \"%s\" must be named \"%s\"" +msgstr "" + +# rewrite/rewriteDefine.c:407 +#: rewrite/rewriteDefine.c:407 +#, c-format +msgid "could not convert table \"%s\" to a view because it is not empty" +msgstr "" + +# rewrite/rewriteDefine.c:414 +#: rewrite/rewriteDefine.c:414 +#, c-format +msgid "could not convert table \"%s\" to a view because it has triggers" +msgstr "" + +# rewrite/rewriteDefine.c:416 +#: rewrite/rewriteDefine.c:416 +msgid "" +"In particular, the table may not be involved in any foreign key " +"relationships." +msgstr "" + +# rewrite/rewriteDefine.c:421 +#: rewrite/rewriteDefine.c:421 +#, c-format +msgid "could not convert table \"%s\" to a view because it has indexes" +msgstr "" + +# rewrite/rewriteDefine.c:427 +#: rewrite/rewriteDefine.c:427 +#, c-format +msgid "could not convert table \"%s\" to a view because it has child tables" +msgstr "" + +# rewrite/rewriteHandler.c:491 rewrite/rewriteHandler.c:510 +#: rewrite/rewriteHandler.c:492 rewrite/rewriteHandler.c:511 +#, c-format +msgid "multiple assignments to same column \"%s\"" +msgstr "" + +# rewrite/rewriteHandler.c:967 rewrite/rewriteHandler.c:1252 +#: rewrite/rewriteHandler.c:968 rewrite/rewriteHandler.c:1253 +#, c-format +msgid "infinite recursion detected in rules for relation \"%s\"" +msgstr "" + +# rewrite/rewriteHandler.c:1362 +#: rewrite/rewriteHandler.c:1365 +msgid "cannot insert into a view" +msgstr "無法插入view" + +# rewrite/rewriteHandler.c:1363 +#: rewrite/rewriteHandler.c:1366 +msgid "You need an unconditional ON INSERT DO INSTEAD rule." +msgstr "" + +# rewrite/rewriteHandler.c:1368 +#: rewrite/rewriteHandler.c:1371 +msgid "cannot update a view" +msgstr "無法更新view" + +# rewrite/rewriteHandler.c:1369 +#: rewrite/rewriteHandler.c:1372 +msgid "You need an unconditional ON UPDATE DO INSTEAD rule." +msgstr "" + +# rewrite/rewriteHandler.c:1374 +#: rewrite/rewriteHandler.c:1377 +msgid "cannot delete from a view" +msgstr "無法經由view刪除" + +# rewrite/rewriteHandler.c:1375 +#: rewrite/rewriteHandler.c:1378 +msgid "You need an unconditional ON DELETE DO INSTEAD rule." +msgstr "" + +# rewrite/rewriteManip.c:737 rewrite/rewriteManip.c:793 +#: rewrite/rewriteManip.c:737 rewrite/rewriteManip.c:793 +msgid "conditional utility statements are not implemented" +msgstr "" + +# storage/buffer/bufmgr.c:210 +#: storage/buffer/bufmgr.c:217 +#, c-format +msgid "invalid page header in block %u of relation \"%s\"; zeroing out page" +msgstr "" + +# storage/buffer/bufmgr.c:217 +#: storage/buffer/bufmgr.c:224 +#, c-format +msgid "invalid page header in block %u of relation \"%s\"" +msgstr "" + +# storage/buffer/bufmgr.c:1958 +#: storage/buffer/bufmgr.c:1991 +#, c-format +msgid "could not write block %u of %u/%u/%u" +msgstr "" + +# storage/buffer/bufmgr.c:1963 +#: storage/buffer/bufmgr.c:1996 +msgid "Multiple failures --- write error may be permanent." +msgstr "" + +# storage/buffer/bufmgr.c:1981 +#: storage/buffer/bufmgr.c:2014 +#, c-format +msgid "writing block %u of relation %u/%u/%u" +msgstr "" + +# storage/buffer/buf_table.c:93 storage/freespace/freespace.c:1014 +# storage/ipc/shmem.c:185 storage/ipc/shmem.c:246 storage/ipc/shmem.c:386 +# storage/lmgr/lock.c:561 storage/lmgr/lock.c:624 storage/lmgr/proc.c:179 +#: storage/buffer/buf_table.c:93 storage/freespace/freespace.c:1014 +#: storage/ipc/shmem.c:185 storage/ipc/shmem.c:246 storage/ipc/shmem.c:386 +#: storage/lmgr/lock.c:558 storage/lmgr/lock.c:621 storage/lmgr/proc.c:179 +msgid "out of shared memory" +msgstr "共享記憶體用盡" + +# storage/buffer/localbuf.c:103 +#: storage/buffer/localbuf.c:103 +msgid "no empty local buffer available" +msgstr "" + +# storage/file/fd.c:355 +#: storage/file/fd.c:355 +msgid "insufficient file descriptors available to start server process" +msgstr "" + +# storage/file/fd.c:356 +#: storage/file/fd.c:356 +#, c-format +msgid "System allows %d, we need at least %d." +msgstr "" + +# storage/file/fd.c:397 storage/file/fd.c:1180 storage/file/fd.c:1295 +#: storage/file/fd.c:397 storage/file/fd.c:1180 storage/file/fd.c:1295 +#, c-format +msgid "out of file descriptors: %m; release and retry" +msgstr "" + +# storage/freespace/freespace.c:276 storage/freespace/freespace.c:294 +# storage/freespace/freespace.c:313 +#: storage/freespace/freespace.c:276 storage/freespace/freespace.c:294 +#: storage/freespace/freespace.c:313 +msgid "insufficient shared memory for free space map" +msgstr "" + +# storage/freespace/freespace.c:306 +#: storage/freespace/freespace.c:306 +#, c-format +msgid "max_fsm_pages must exceed max_fsm_relations * %d" +msgstr "" + +# storage/freespace/freespace.c:341 +#: storage/freespace/freespace.c:341 +msgid "max_fsm_pages is too large" +msgstr "max_fsm_pages太大" + +# storage/freespace/freespace.c:709 +#: storage/freespace/freespace.c:709 +#, c-format +msgid "free space map: %d relations, %d pages stored; %.0f total pages needed" +msgstr "" + +# storage/freespace/freespace.c:711 +#: storage/freespace/freespace.c:711 +#, c-format +msgid "Allocated FSM size: %d relations + %d pages = %.0f kB shared memory." +msgstr "" + +# storage/ipc/shmem.c:420 +#: storage/ipc/shmem.c:420 +#, c-format +msgid "could not allocate shared memory segment \"%s\"" +msgstr "" + +# storage/lmgr/lock.c:562 storage/lmgr/lock.c:625 +#: storage/lmgr/lock.c:559 storage/lmgr/lock.c:622 +msgid "You may need to increase max_locks_per_transaction." +msgstr "您可能必須增加 max_locks_per_transaction。" + +# storage/lmgr/deadlock.c:867 +#: storage/lmgr/deadlock.c:867 +#, c-format +msgid "Process %d waits for %s on transaction %u; blocked by process %d." +msgstr "" + +# storage/lmgr/deadlock.c:877 +#: storage/lmgr/deadlock.c:877 +#, c-format +msgid "" +"Process %d waits for %s on relation %u of database %u; blocked by process %d." +msgstr "" + +# storage/lmgr/deadlock.c:887 +#: storage/lmgr/deadlock.c:887 +msgid "deadlock detected" +msgstr "發現deadlock" + +# storage/page/bufpage.c:135 storage/page/bufpage.c:334 +# storage/page/bufpage.c:472 +#: storage/page/bufpage.c:135 storage/page/bufpage.c:334 +#: storage/page/bufpage.c:472 +#, c-format +msgid "corrupted page pointers: lower = %u, upper = %u, special = %u" +msgstr "" + +# storage/page/bufpage.c:377 +#: storage/page/bufpage.c:377 +#, c-format +msgid "corrupted item pointer: %u" +msgstr "" + +# storage/page/bufpage.c:392 +#: storage/page/bufpage.c:392 +#, c-format +msgid "corrupted item lengths: total %u, available space %u" +msgstr "" + +# storage/page/bufpage.c:490 +#: storage/page/bufpage.c:490 +#, c-format +msgid "corrupted item pointer: offset = %u, size = %u" +msgstr "" + +# storage/smgr/md.c:367 +#: storage/smgr/md.c:363 +#, c-format +msgid "could not open relation %u/%u/%u: %m" +msgstr "無法開啟relation %u/%u/%u：%m" + +# storage/smgr/md.c:769 +#: storage/smgr/md.c:765 +#, c-format +msgid "could not fsync segment %u of relation %u/%u/%u: %m" +msgstr "" + +# storage/smgr/md.c:959 +#: storage/smgr/md.c:955 +#, c-format +msgid "could not open segment %u of relation %u/%u/%u (target block %u): %m" +msgstr "" + +# storage/smgr/smgr.c:239 +#: storage/smgr/smgr.c:239 +#, c-format +msgid "could not close relation %u/%u/%u: %m" +msgstr "無法關閉relation %u/%u/%u：%m" + +# storage/smgr/smgr.c:333 +#: storage/smgr/smgr.c:333 +#, c-format +msgid "could not create relation %u/%u/%u: %m" +msgstr "無法建立relation %u/%u/%u：%m" + +# storage/smgr/smgr.c:333 +#: storage/smgr/smgr.c:457 +#, c-format +msgid "could not remove relation %u/%u/%u: %m" +msgstr "無法刪除relation %u/%u/%u：%m" + +# storage/smgr/smgr.c:478 +#: storage/smgr/smgr.c:478 +#, c-format +msgid "could not extend relation %u/%u/%u: %m" +msgstr "無法擴展relation %u/%u/%u：%m" + +# storage/smgr/smgr.c:482 +#: storage/smgr/smgr.c:482 +msgid "Check free disk space." +msgstr "檢查可用磁碟空間。" + +# storage/smgr/smgr.c:499 +#: storage/smgr/smgr.c:499 +#, c-format +msgid "could not read block %u of relation %u/%u/%u: %m" +msgstr "" + +# storage/smgr/smgr.c:524 +#: storage/smgr/smgr.c:524 +#, c-format +msgid "could not write block %u of relation %u/%u/%u: %m" +msgstr "" + +# storage/smgr/smgr.c:554 +#: storage/smgr/smgr.c:554 +#, c-format +msgid "could not count blocks of relation %u/%u/%u: %m" +msgstr "" + +# storage/smgr/smgr.c:587 storage/smgr/smgr.c:871 +#: storage/smgr/smgr.c:587 storage/smgr/smgr.c:871 +#, c-format +msgid "could not truncate relation %u/%u/%u to %u blocks: %m" +msgstr "" + +# storage/smgr/smgr.c:644 +#: storage/smgr/smgr.c:644 +#, c-format +msgid "could not sync relation %u/%u/%u: %m" +msgstr "" + +# tcop/postgres.c:334 tcop/postgres.c:346 tcop/postgres.c:357 +# tcop/postgres.c:369 tcop/postgres.c:3162 +#: tcop/postgres.c:337 tcop/postgres.c:349 tcop/postgres.c:360 +#: tcop/postgres.c:372 tcop/postgres.c:3218 +#, c-format +msgid "invalid frontend message type %d" +msgstr "" + +# tcop/postgres.c:468 tcop/postgres.c:503 tcop/postgres.c:514 +#: tcop/postgres.c:473 tcop/postgres.c:510 tcop/postgres.c:522 +#, c-format +msgid "statement: %s" +msgstr "" + +# tcop/fastpath.c:304 tcop/postgres.c:845 tcop/postgres.c:1166 +# tcop/postgres.c:1650 +#: tcop/fastpath.c:304 tcop/postgres.c:854 tcop/postgres.c:1176 +#: tcop/postgres.c:1660 +msgid "" +"current transaction is aborted, commands ignored until end of transaction " +"block" +msgstr "" + +# tcop/postgres.c:1008 +#: tcop/postgres.c:1018 +#, c-format +msgid "duration: %ld.%03ld ms" +msgstr "" + +# tcop/postgres.c:1021 +#: tcop/postgres.c:1031 +#, c-format +msgid "duration: %ld.%03ld ms statement: %s" +msgstr "" + +# tcop/postgres.c:1129 +#: tcop/postgres.c:1139 +msgid "cannot insert multiple commands into a prepared statement" +msgstr "" + +# tcop/postgres.c:1332 +#: tcop/postgres.c:1342 +#, c-format +msgid "bind message has %d parameter formats but %d parameters" +msgstr "" + +# tcop/postgres.c:1345 tcop/postgres.c:1727 +#: tcop/postgres.c:1355 tcop/postgres.c:1737 +msgid "unnamed prepared statement does not exist" +msgstr "" + +# tcop/postgres.c:1351 +#: tcop/postgres.c:1361 +#, c-format +msgid "" +"bind message supplies %d parameters, but prepared statement \"%s\" requires %" +"d" +msgstr "" + +# tcop/postgres.c:1473 +#: tcop/postgres.c:1483 +#, c-format +msgid "incorrect binary data format in bind parameter %d" +msgstr "" + +# tcop/postgres.c:1581 tcop/postgres.c:1780 +#: tcop/postgres.c:1591 tcop/postgres.c:1790 +#, c-format +msgid "portal \"%s\" does not exist" +msgstr "portal \"%s\"不存在" + +# tcop/postgres.c:1874 +#: tcop/postgres.c:1884 +msgid "terminating connection because of crash of another server process" +msgstr "" + +# tcop/postgres.c:1875 +#: tcop/postgres.c:1885 +msgid "" +"The postmaster has commanded this server process to roll back the current " +"transaction and exit, because another server process exited abnormally and " +"possibly corrupted shared memory." +msgstr "" + +# tcop/postgres.c:1879 +#: tcop/postgres.c:1889 +msgid "" +"In a moment you should be able to reconnect to the database and repeat your " +"command." +msgstr "" + +# tcop/postgres.c:1995 +#: tcop/postgres.c:2005 +msgid "floating-point exception" +msgstr "發生浮點數例外" + +# tcop/postgres.c:1996 +#: tcop/postgres.c:2006 +msgid "" +"An invalid floating-point operation was signaled. This probably means an out-" +"of-range result or an invalid operation, such as division by zero." +msgstr "" + +# tcop/postgres.c:2032 +#: tcop/postgres.c:2042 +msgid "terminating connection due to administrator command" +msgstr "因管理命令中斷連線" + +# tcop/postgres.c:2042 +#: tcop/postgres.c:2052 +msgid "canceling query due to user request" +msgstr "使用者要求取消查詢" + +# tcop/postgres.c:2093 +#: tcop/postgres.c:2103 +msgid "stack depth limit exceeded" +msgstr "超過堆疊深度限制" + +# tcop/postgres.c:2094 +#: tcop/postgres.c:2104 +msgid "Increase the configuration parameter \"max_stack_depth\"." +msgstr "" + +# tcop/postgres.c:2112 +#: tcop/postgres.c:2122 +#, c-format +msgid "" +"%s is the PostgreSQL stand-alone backend. It is not\n" +"intended to be used by normal users.\n" +"\n" +msgstr "" + +# tcop/postgres.c:2114 +#: tcop/postgres.c:2124 +#, c-format +msgid "" +"Usage:\n" +" %s [OPTION]... [DBNAME]\n" +"\n" +msgstr "" +"使用方法：\n" +" %s [選項]... [資料庫名稱]\n" +"\n" + +# tcop/postgres.c:2121 +#: tcop/postgres.c:2131 +msgid " -d 0-5 debugging level (0 is off)\n" +msgstr " -d 0-5 除錯等級(0是關閉)\n" + +# tcop/postgres.c:2123 +#: tcop/postgres.c:2133 +msgid " -e use European date input format (DMY)\n" +msgstr " -e 使用歐洲日期輸入格式(DMY)\n" + +# tcop/postgres.c:2124 +#: tcop/postgres.c:2134 +msgid " -E echo query before execution\n" +msgstr " -E 顯示將要執行的查詢\n" + +# tcop/postgres.c:2126 +#: tcop/postgres.c:2136 +msgid " -N do not use newline as interactive query delimiter\n" +msgstr " -N 在互動模式不使用換行符號做為查詢分隔符號\n" + +# tcop/postgres.c:2127 +#: tcop/postgres.c:2137 +msgid " -o FILENAME send stdout and stderr to given file\n" +msgstr " -o 檔案名稱 將stdout和stderr寫入檔案\n" + +# tcop/postgres.c:2128 +#: tcop/postgres.c:2138 +msgid " -P disable system indexes\n" +msgstr " -P 關閉系統索引\n" + +# tcop/postgres.c:2129 +#: tcop/postgres.c:2139 +msgid " -s show statistics after each query\n" +msgstr " -s 執行每個查詢之後顯示統計資料\n" + +# tcop/postgres.c:2130 +#: tcop/postgres.c:2140 +msgid " -S WORK-MEM set amount of memory for sorts (in kB)\n" +msgstr " -S WORK-MEM 設定排序可用的記憶體(單位是KB)\n" + +# tcop/postgres.c:2131 +#: tcop/postgres.c:2141 +msgid " --describe-config describe configuration parameters, then exit\n" +msgstr "" + +# tcop/postgres.c:2135 +#: tcop/postgres.c:2145 +msgid " -f s|i|n|m|h forbid use of some plan types\n" +msgstr "" + +# tcop/postgres.c:2136 +#: tcop/postgres.c:2146 +msgid " -i do not execute queries\n" +msgstr " -i 不執行查詢\n" + +# tcop/postgres.c:2137 +#: tcop/postgres.c:2147 +msgid " -O allow system table structure changes\n" +msgstr " -O 允許修改系統資料表結構\n" + +# tcop/postgres.c:2138 +#: tcop/postgres.c:2148 +msgid " -t pa|pl|ex show timings after each query\n" +msgstr " -t pa|pl|ex 執行每個查詢之後顯示執行時間\n" + +# tcop/postgres.c:2139 +#: tcop/postgres.c:2149 +msgid " -W NUM wait NUM seconds to allow attach from a debugger\n" +msgstr " -W NUM 等待NUM秒，讓除錯器可以連結\n" + +# tcop/postgres.c:2140 +#: tcop/postgres.c:2150 +msgid "" +"\n" +"Report bugs to .\n" +msgstr "" +"\n" +"回報錯誤給。\n" + +# tcop/postgres.c:2262 +#: tcop/postgres.c:2314 +msgid "assert checking is not compiled in" +msgstr "編譯時未加入assert檢查。" + +# tcop/postgres.c:2635 +#: tcop/postgres.c:2652 +msgid "invalid command-line arguments for server process" +msgstr "給伺服器行程的命令列引數不合法" + +# tcop/postgres.c:2636 tcop/postgres.c:2652 +#: tcop/postgres.c:2653 tcop/postgres.c:2669 +#, c-format +msgid "Try \"%s --help\" for more information." +msgstr "執行\"%s --help\"顯示更多資訊。" + +# tcop/postgres.c:2650 +#: tcop/postgres.c:2667 +#, c-format +msgid "%s: invalid command-line arguments" +msgstr "%s：不合法的命令列引數" + +# tcop/postgres.c:2660 +#: tcop/postgres.c:2677 +#, c-format +msgid "%s: no database nor user name specified" +msgstr "%s：未指定資料庫和使用者名稱" + +# tcop/postgres.c:3075 +#: tcop/postgres.c:3131 +#, c-format +msgid "invalid CLOSE message subtype %d" +msgstr "" + +# tcop/postgres.c:3105 +#: tcop/postgres.c:3161 +#, c-format +msgid "invalid DESCRIBE message subtype %d" +msgstr "" + +# tcop/postgres.c:3346 +#: tcop/postgres.c:3402 +#, c-format +msgid "disconnection: session time: %s%s%s%s%s" +msgstr "" + +# tcop/fastpath.c:106 tcop/fastpath.c:444 tcop/fastpath.c:567 +#: tcop/fastpath.c:106 tcop/fastpath.c:444 tcop/fastpath.c:567 +#, c-format +msgid "invalid argument size %d in function call message" +msgstr "" + +# tcop/fastpath.c:414 tcop/fastpath.c:537 +#: tcop/fastpath.c:414 tcop/fastpath.c:537 +#, c-format +msgid "function call message contains %d arguments but function requires %d" +msgstr "" + +# tcop/fastpath.c:422 +#: tcop/fastpath.c:422 +#, c-format +msgid "function call message contains %d argument formats but %d arguments" +msgstr "" + +# tcop/fastpath.c:505 tcop/fastpath.c:590 +#: tcop/fastpath.c:505 tcop/fastpath.c:590 +#, c-format +msgid "incorrect binary data format in function argument %d" +msgstr "" + +# tcop/pquery.c:448 +#: tcop/pquery.c:448 +#, c-format +msgid "bind message has %d result formats but query has %d columns" +msgstr "" + +# tcop/pquery.c:771 +#: tcop/pquery.c:771 +msgid "cursor can only scan forward" +msgstr "cursor只能向前掃描" + +# tcop/pquery.c:772 +#: tcop/pquery.c:772 +msgid "Declare it with SCROLL option to enable backward scan." +msgstr "" + +# tcop/utility.c:77 +#: tcop/utility.c:77 +#, c-format +msgid "table \"%s\" does not exist" +msgstr "資料表\"%s\"不存在" + +# tcop/utility.c:79 +#: tcop/utility.c:79 +msgid "Use DROP TABLE to remove a table." +msgstr "使用DROP TABLE刪除資料表。" + +# tcop/utility.c:82 +#: tcop/utility.c:82 +#, c-format +msgid "sequence \"%s\" does not exist" +msgstr "sequence \"%s\"不存在" + +# tcop/utility.c:84 +#: tcop/utility.c:84 +msgid "Use DROP SEQUENCE to remove a sequence." +msgstr "使用DROP SEQUENCE刪除sequence。" + +# tcop/utility.c:87 +#: tcop/utility.c:87 +#, c-format +msgid "view \"%s\" does not exist" +msgstr "view \"%s\"不存在" + +# tcop/utility.c:89 +#: tcop/utility.c:89 +msgid "Use DROP VIEW to remove a view." +msgstr "使用DROP VIEW刪除view。" + +# tcop/utility.c:92 +#: tcop/utility.c:92 +#, c-format +msgid "index \"%s\" does not exist" +msgstr "索引\"%s\"不存在" + +# tcop/utility.c:94 +#: tcop/utility.c:94 +msgid "Use DROP INDEX to remove an index." +msgstr "使用DROP INDEX刪除索引。" + +# tcop/utility.c:98 +#: tcop/utility.c:98 +#, c-format +msgid "\"%s\" is not a type" +msgstr "\"%s\"不是資料型別" + +# tcop/utility.c:99 +#: tcop/utility.c:99 +msgid "Use DROP TYPE to remove a type." +msgstr "使用DROP TYPE刪除資料型別。" + +# tcop/utility.c:973 +#: tcop/utility.c:973 +msgid "must be superuser to do CHECKPOINT" +msgstr "只有管理者能用CHECKPOINT" + +# utils/adt/array_userfuncs.c:50 +#: utils/adt/array_userfuncs.c:50 +msgid "could not determine input data types" +msgstr "無法識別輸入資料型別" + +# utils/adt/array_userfuncs.c:72 +#: utils/adt/array_userfuncs.c:72 +msgid "neither input type is an array" +msgstr "" + +# utils/adt/array_userfuncs.c:99 +#: utils/adt/array_userfuncs.c:99 +msgid "argument must be empty or one-dimensional array" +msgstr "" + +# utils/adt/array_userfuncs.c:198 utils/adt/array_userfuncs.c:210 +# utils/adt/array_userfuncs.c:247 utils/adt/array_userfuncs.c:280 +# utils/adt/array_userfuncs.c:308 +#: utils/adt/array_userfuncs.c:198 utils/adt/array_userfuncs.c:210 +#: utils/adt/array_userfuncs.c:247 utils/adt/array_userfuncs.c:280 +#: utils/adt/array_userfuncs.c:308 +msgid "cannot concatenate incompatible arrays" +msgstr "無法串接型別不符的陣列" + +# utils/adt/array_userfuncs.c:199 +#: utils/adt/array_userfuncs.c:199 +#, c-format +msgid "Arrays of %d and %d dimensions are not compatible for concatenation." +msgstr "" + +# utils/adt/array_userfuncs.c:211 +#: utils/adt/array_userfuncs.c:211 +#, c-format +msgid "" +"Arrays with element types %s and %s are not compatible for concatenation." +msgstr "" + +# utils/adt/array_userfuncs.c:248 +#: utils/adt/array_userfuncs.c:248 +msgid "" +"Arrays with differing element dimensions are not compatible for " +"concatenation." +msgstr "" + +# utils/adt/array_userfuncs.c:281 utils/adt/array_userfuncs.c:309 +#: utils/adt/array_userfuncs.c:281 utils/adt/array_userfuncs.c:309 +msgid "Arrays with differing dimensions are not compatible for concatenation." +msgstr "" + +# utils/adt/array_userfuncs.c:354 +#: utils/adt/array_userfuncs.c:354 +#, c-format +msgid "invalid array element type OID: %u" +msgstr "無效的陣列元素型別OID：%u" + +# utils/adt/array_userfuncs.c:358 utils/adt/arrayfuncs.c:1149 +# utils/adt/arrayfuncs.c:2417 +#: utils/adt/array_userfuncs.c:358 utils/adt/arrayfuncs.c:1149 +#: utils/adt/arrayfuncs.c:2417 +#, c-format +msgid "invalid number of dimensions: %d" +msgstr "無效的維度數值：%d" + +# utils/adt/acl.c:109 utils/adt/name.c:90 +#: utils/adt/acl.c:109 utils/adt/name.c:90 +msgid "identifier too long" +msgstr "識別字過長" + +# utils/adt/acl.c:110 utils/adt/name.c:91 +#: utils/adt/acl.c:110 utils/adt/name.c:91 +#, c-format +msgid "Identifier must be less than %d characters." +msgstr "識別字必須少於 %d 個字元。" + +# utils/adt/acl.c:197 +#: utils/adt/acl.c:197 +#, c-format +msgid "unrecognized key word: \"%s\"" +msgstr "" + +# utils/adt/acl.c:198 +#: utils/adt/acl.c:198 +msgid "ACL key word must be \"group\" or \"user\"." +msgstr "" + +# utils/adt/acl.c:203 +#: utils/adt/acl.c:203 +msgid "missing name" +msgstr "缺少名稱" + +# utils/adt/acl.c:204 +#: utils/adt/acl.c:204 +msgid "A name must follow the \"group\" or \"user\" key word." +msgstr "" + +# utils/adt/acl.c:212 +#: utils/adt/acl.c:212 +msgid "missing \"=\" sign" +msgstr "缺少\"=\"符號" + +# utils/adt/acl.c:259 +#: utils/adt/acl.c:259 +#, c-format +msgid "invalid mode character: must be one of \"%s\"" +msgstr "" + +# utils/adt/acl.c:289 +#: utils/adt/acl.c:289 +msgid "a name must follow the \"/\" sign" +msgstr "" + +# utils/adt/acl.c:298 +#: utils/adt/acl.c:298 +#, c-format +msgid "defaulting grantor to user ID %u" +msgstr "" + +# utils/adt/acl.c:357 +#: utils/adt/acl.c:357 +msgid "extra garbage at the end of the ACL specification" +msgstr "" + +# utils/adt/acl.c:895 +#: utils/adt/acl.c:895 +msgid "grant options cannot be granted back to your own grantor" +msgstr "" + +# utils/adt/acl.c:954 +#: utils/adt/acl.c:954 +msgid "dependent privileges exist" +msgstr "" + +# utils/adt/acl.c:955 +#: utils/adt/acl.c:955 +msgid "Use CASCADE to revoke them too." +msgstr "" + +# utils/adt/acl.c:1124 +#: utils/adt/acl.c:1124 +#, c-format +msgid "group with ID %u does not exist" +msgstr "ID為%u的群組不存在" + +# utils/adt/acl.c:1137 +#: utils/adt/acl.c:1137 +msgid "aclinsert is no longer supported" +msgstr "aclinsert已經不被支援" + +# utils/adt/acl.c:1147 +#: utils/adt/acl.c:1147 +msgid "aclremove is no longer supported" +msgstr "aclremove已經不被支援" + +# utils/adt/acl.c:1199 +#: utils/adt/acl.c:1199 +msgid "cannot specify both user and group" +msgstr "不能同時指定使用者和群組" + +# utils/adt/acl.c:1261 utils/adt/acl.c:1486 utils/adt/acl.c:1698 +# utils/adt/acl.c:1902 utils/adt/acl.c:2106 utils/adt/acl.c:2315 +# utils/adt/acl.c:2516 +#: utils/adt/acl.c:1261 utils/adt/acl.c:1486 utils/adt/acl.c:1698 +#: utils/adt/acl.c:1902 utils/adt/acl.c:2106 utils/adt/acl.c:2315 +#: utils/adt/acl.c:2516 +#, c-format +msgid "unrecognized privilege type: \"%s\"" +msgstr "" + +# utils/adt/acl.c:1875 utils/adt/regproc.c:117 utils/adt/regproc.c:138 +# utils/adt/regproc.c:290 +#: utils/adt/acl.c:1875 utils/adt/regproc.c:117 utils/adt/regproc.c:138 +#: utils/adt/regproc.c:290 +#, c-format +msgid "function \"%s\" does not exist" +msgstr "函式\"%s\"不存在" + +# utils/adt/like.c:453 utils/adt/like_match.c:291 utils/adt/regexp.c:461 +#: utils/adt/like.c:453 utils/adt/like_match.c:291 utils/adt/regexp.c:480 +msgid "invalid escape string" +msgstr "" + +# utils/adt/like.c:454 utils/adt/like_match.c:292 utils/adt/regexp.c:462 +#: utils/adt/like.c:454 utils/adt/like_match.c:292 utils/adt/regexp.c:481 +msgid "Escape string must be empty or one character." +msgstr "" + +# utils/adt/arrayfuncs.c:223 utils/adt/arrayfuncs.c:235 +#: utils/adt/arrayfuncs.c:223 utils/adt/arrayfuncs.c:235 +msgid "missing dimension value" +msgstr "缺少維度值" + +# utils/adt/arrayfuncs.c:245 +#: utils/adt/arrayfuncs.c:245 +msgid "missing \"]\" in array dimensions" +msgstr "陣列維度缺少 \"]\"" + +# utils/adt/arrayfuncs.c:253 +#: utils/adt/arrayfuncs.c:253 +msgid "upper bound cannot be less than lower bound" +msgstr "上界不能少於下界" + +# utils/adt/arrayfuncs.c:265 utils/adt/arrayfuncs.c:291 +#: utils/adt/arrayfuncs.c:265 utils/adt/arrayfuncs.c:291 +msgid "array value must start with \"{\" or dimension information" +msgstr "陣列值必須以 \"{\" 或維度數起始" + +# utils/adt/arrayfuncs.c:279 +#: utils/adt/arrayfuncs.c:279 +msgid "missing assignment operator" +msgstr "缺少賦值運算子" + +# utils/adt/arrayfuncs.c:296 utils/adt/arrayfuncs.c:302 +#: utils/adt/arrayfuncs.c:296 utils/adt/arrayfuncs.c:302 +msgid "array dimensions incompatible with array literal" +msgstr "" + +# utils/adt/arrayfuncs.c:328 +#: utils/adt/arrayfuncs.c:328 +msgid "missing left brace" +msgstr "缺少左大括號" + +# utils/adt/arrayfuncs.c:409 utils/adt/arrayfuncs.c:424 +# utils/adt/arrayfuncs.c:433 utils/adt/arrayfuncs.c:447 +# utils/adt/arrayfuncs.c:467 utils/adt/arrayfuncs.c:495 +# utils/adt/arrayfuncs.c:500 utils/adt/arrayfuncs.c:540 +# utils/adt/arrayfuncs.c:561 utils/adt/arrayfuncs.c:580 +# utils/adt/arrayfuncs.c:673 utils/adt/arrayfuncs.c:682 +# utils/adt/arrayfuncs.c:710 utils/adt/arrayfuncs.c:725 +# utils/adt/arrayfuncs.c:778 +#: utils/adt/arrayfuncs.c:409 utils/adt/arrayfuncs.c:424 +#: utils/adt/arrayfuncs.c:433 utils/adt/arrayfuncs.c:447 +#: utils/adt/arrayfuncs.c:467 utils/adt/arrayfuncs.c:495 +#: utils/adt/arrayfuncs.c:500 utils/adt/arrayfuncs.c:540 +#: utils/adt/arrayfuncs.c:561 utils/adt/arrayfuncs.c:580 +#: utils/adt/arrayfuncs.c:673 utils/adt/arrayfuncs.c:682 +#: utils/adt/arrayfuncs.c:710 utils/adt/arrayfuncs.c:725 +#: utils/adt/arrayfuncs.c:778 +#, c-format +msgid "malformed array literal: \"%s\"" +msgstr "陣列實量格式錯誤: \"%s\"" + +# utils/adt/arrayfuncs.c:1160 +#: utils/adt/arrayfuncs.c:1160 +msgid "invalid array flags" +msgstr "不合法的陣列旗標" + +# utils/adt/arrayfuncs.c:1168 +#: utils/adt/arrayfuncs.c:1168 +msgid "wrong element type" +msgstr "錯誤的元素型別" + +# utils/adt/arrayfuncs.c:1211 utils/cache/lsyscache.c:1756 +#: utils/adt/arrayfuncs.c:1211 utils/cache/lsyscache.c:1764 +#, c-format +msgid "no binary input function available for type %s" +msgstr "" + +# utils/adt/arrayfuncs.c:1304 +#: utils/adt/arrayfuncs.c:1304 +#, c-format +msgid "improper binary format in array element %d" +msgstr "" + +# utils/adt/arrayfuncs.c:1383 utils/cache/lsyscache.c:1792 +#: utils/adt/arrayfuncs.c:1383 utils/cache/lsyscache.c:1800 +#, c-format +msgid "no binary output function available for type %s" +msgstr "" + +# utils/adt/arrayfuncs.c:1657 +#: utils/adt/arrayfuncs.c:1657 +msgid "slices of fixed-length arrays not implemented" +msgstr "" + +# utils/adt/arrayfuncs.c:1795 utils/adt/arrayfuncs.c:1800 +# utils/adt/arrayfuncs.c:1840 utils/adt/arrayfuncs.c:1862 +# utils/adt/arrayfuncs.c:1874 utils/adt/arrayfuncs.c:2035 +# utils/adt/arrayfuncs.c:2052 utils/adt/arrayfuncs.c:2063 +# utils/adt/arrayfuncs.c:2072 utils/adt/arrayfuncs.c:2083 +#: utils/adt/arrayfuncs.c:1795 utils/adt/arrayfuncs.c:1800 +#: utils/adt/arrayfuncs.c:1840 utils/adt/arrayfuncs.c:1862 +#: utils/adt/arrayfuncs.c:1874 utils/adt/arrayfuncs.c:2035 +#: utils/adt/arrayfuncs.c:2052 utils/adt/arrayfuncs.c:2063 +#: utils/adt/arrayfuncs.c:2072 utils/adt/arrayfuncs.c:2083 +msgid "invalid array subscripts" +msgstr "" + +# utils/adt/arrayfuncs.c:1991 +#: utils/adt/arrayfuncs.c:1991 +msgid "updates on slices of fixed-length arrays not implemented" +msgstr "" + +# utils/adt/arrayfuncs.c:2026 utils/adt/arrayfuncs.c:2095 +#: utils/adt/arrayfuncs.c:2026 utils/adt/arrayfuncs.c:2095 +msgid "source array too small" +msgstr "來源陣列太小" + +# utils/adt/arrayfuncs.c:2319 utils/adt/arrayfuncs.c:3321 +#: utils/adt/arrayfuncs.c:2319 utils/adt/arrayfuncs.c:3321 +msgid "null array elements not supported" +msgstr "不支援空陣列元素" + +# utils/adt/arrayfuncs.c:2559 utils/adt/arrayfuncs.c:2714 +#: utils/adt/arrayfuncs.c:2559 utils/adt/arrayfuncs.c:2714 +msgid "cannot compare arrays of different element types" +msgstr "無法比較元素型別不同的陣列" + +# utils/adt/arrayfuncs.c:2731 +#: utils/adt/arrayfuncs.c:2731 +#, c-format +msgid "could not identify a comparison function for type %s" +msgstr "" + +# utils/adt/arrayfuncs.c:3130 +#: utils/adt/arrayfuncs.c:3130 +msgid "could not determine target array type" +msgstr "無法確認目標陣列型別" + +# utils/adt/arrayfuncs.c:3136 +#: utils/adt/arrayfuncs.c:3136 +msgid "target type is not an array" +msgstr "目標型別不是陣列" + +# utils/adt/arrayfuncs.c:3148 +#: utils/adt/arrayfuncs.c:3148 +msgid "array coercion to domain type elements not currently supported" +msgstr "" + +# utils/adt/ascii.c:68 +#: utils/adt/ascii.c:68 +#, c-format +msgid "encoding conversion from %s to ASCII not supported" +msgstr "不支援由 %s 到 ASCII 的編碼轉換" + +# utils/adt/bool.c:80 +#: utils/adt/bool.c:80 +#, c-format +msgid "invalid input syntax for type boolean: \"%s\"" +msgstr "無效的 boolean 型別輸入語法: \"%s\"" + +# utils/adt/cash.c:198 +#: utils/adt/cash.c:198 +#, c-format +msgid "invalid input syntax for type money: \"%s\"" +msgstr "無效的 money 型別輸入語法: \"%s\"" + +# utils/adt/cash.c:496 utils/adt/cash.c:548 utils/adt/cash.c:601 +# utils/adt/cash.c:653 utils/adt/float.c:795 utils/adt/float.c:859 +# utils/adt/float.c:2117 utils/adt/float.c:2179 utils/adt/geo_ops.c:3832 +# utils/adt/int.c:705 utils/adt/int.c:830 utils/adt/int.c:920 +# utils/adt/int.c:1001 utils/adt/int.c:1025 utils/adt/int.c:1040 +# utils/adt/int.c:1055 utils/adt/int.c:1070 utils/adt/int8.c:597 +# utils/adt/int8.c:642 utils/adt/int8.c:765 utils/adt/int8.c:855 +# utils/adt/numeric.c:3820 utils/adt/timestamp.c:2197 +#: utils/adt/cash.c:496 utils/adt/cash.c:548 utils/adt/cash.c:601 +#: utils/adt/cash.c:653 utils/adt/float.c:795 utils/adt/float.c:859 +#: utils/adt/float.c:2117 utils/adt/float.c:2179 utils/adt/geo_ops.c:3832 +#: utils/adt/int.c:705 utils/adt/int.c:830 utils/adt/int.c:920 +#: utils/adt/int.c:1001 utils/adt/int.c:1025 utils/adt/int.c:1040 +#: utils/adt/int.c:1055 utils/adt/int.c:1070 utils/adt/int8.c:597 +#: utils/adt/int8.c:642 utils/adt/int8.c:765 utils/adt/int8.c:855 +#: utils/adt/numeric.c:3820 utils/adt/timestamp.c:2197 +msgid "division by zero" +msgstr "除以 0" + +# utils/adt/char.c:177 +#: utils/adt/char.c:177 +msgid "\"char\" out of range" +msgstr "\"char\"超過範圍" + +# utils/adt/date.c:87 utils/adt/datetime.c:1313 utils/adt/datetime.c:2088 +#: utils/adt/date.c:87 utils/adt/datetime.c:1313 utils/adt/datetime.c:2078 +msgid "date/time value \"current\" is no longer supported" +msgstr "date/time 的值 \"current\" 已不再受支援" + +# utils/adt/date.c:732 utils/adt/date.c:775 utils/adt/date.c:1337 +# utils/adt/date.c:1374 utils/adt/date.c:2252 utils/adt/formatting.c:2894 +# utils/adt/formatting.c:2919 utils/adt/formatting.c:2978 +# utils/adt/nabstime.c:570 utils/adt/nabstime.c:613 utils/adt/nabstime.c:643 +# utils/adt/nabstime.c:686 utils/adt/timestamp.c:153 +# utils/adt/timestamp.c:187 utils/adt/timestamp.c:395 +# utils/adt/timestamp.c:431 utils/adt/timestamp.c:1929 +# utils/adt/timestamp.c:1950 utils/adt/timestamp.c:2008 +# utils/adt/timestamp.c:2031 utils/adt/timestamp.c:2413 +# utils/adt/timestamp.c:2524 utils/adt/timestamp.c:2746 +# utils/adt/timestamp.c:2819 utils/adt/timestamp.c:2865 +# utils/adt/timestamp.c:2949 utils/adt/timestamp.c:3232 +# utils/adt/timestamp.c:3365 utils/adt/timestamp.c:3372 +# utils/adt/timestamp.c:3385 utils/adt/timestamp.c:3393 +# utils/adt/timestamp.c:3456 utils/adt/timestamp.c:3587 +# utils/adt/timestamp.c:3595 utils/adt/timestamp.c:3862 +# utils/adt/timestamp.c:3869 utils/adt/timestamp.c:3897 +# utils/adt/timestamp.c:3901 +#: utils/adt/date.c:732 utils/adt/date.c:775 utils/adt/date.c:1337 +#: utils/adt/date.c:1374 utils/adt/date.c:2252 utils/adt/formatting.c:2895 +#: utils/adt/formatting.c:2920 utils/adt/formatting.c:2979 +#: utils/adt/nabstime.c:570 utils/adt/nabstime.c:613 utils/adt/nabstime.c:643 +#: utils/adt/nabstime.c:686 utils/adt/timestamp.c:153 +#: utils/adt/timestamp.c:187 utils/adt/timestamp.c:395 +#: utils/adt/timestamp.c:431 utils/adt/timestamp.c:1929 +#: utils/adt/timestamp.c:1950 utils/adt/timestamp.c:2008 +#: utils/adt/timestamp.c:2031 utils/adt/timestamp.c:2413 +#: utils/adt/timestamp.c:2524 utils/adt/timestamp.c:2746 +#: utils/adt/timestamp.c:2819 utils/adt/timestamp.c:2866 +#: utils/adt/timestamp.c:2962 utils/adt/timestamp.c:3245 +#: utils/adt/timestamp.c:3378 utils/adt/timestamp.c:3385 +#: utils/adt/timestamp.c:3398 utils/adt/timestamp.c:3406 +#: utils/adt/timestamp.c:3469 utils/adt/timestamp.c:3604 +#: utils/adt/timestamp.c:3612 utils/adt/timestamp.c:3879 +#: utils/adt/timestamp.c:3886 utils/adt/timestamp.c:3914 +#: utils/adt/timestamp.c:3918 +msgid "timestamp out of range" +msgstr "timestamp超過範圍" + +# utils/adt/date.c:802 +#: utils/adt/date.c:802 +msgid "cannot convert reserved abstime value to date" +msgstr "" + +# utils/adt/date.c:863 +#: utils/adt/date.c:863 +#, c-format +msgid "invalid input syntax for type date: \"%s\"" +msgstr "無效的 date 型別輸入語法: \"%s\"" + +# utils/adt/date.c:1579 +#: utils/adt/date.c:1579 +#, c-format +msgid "invalid input syntax for type time: \"%s\"" +msgstr "無效的 time 型別輸入語法: \"%s\"" + +# utils/adt/date.c:1671 utils/adt/date.c:1690 +#: utils/adt/date.c:1671 utils/adt/date.c:1690 +#, c-format +msgid "\"time\" units \"%s\" not recognized" +msgstr "" + +# utils/adt/date.c:2330 +#: utils/adt/date.c:2330 +#, c-format +msgid "invalid input syntax for type time with time zone: \"%s\"" +msgstr "無效的 time 型別帶時區輸入語法: \"%s\"" + +# utils/adt/date.c:2436 utils/adt/date.c:2455 +#: utils/adt/date.c:2436 utils/adt/date.c:2455 +#, c-format +msgid "\"time with time zone\" units \"%s\" not recognized" +msgstr "" + +# utils/adt/date.c:2510 utils/adt/timestamp.c:3793 utils/adt/timestamp.c:3942 +#: utils/adt/date.c:2510 utils/adt/timestamp.c:3810 utils/adt/timestamp.c:3959 +#, c-format +msgid "time zone \"%s\" not recognized" +msgstr "無法識別的時區\"%s\"" + +# utils/adt/date.c:2532 +#: utils/adt/date.c:2532 +#, c-format +msgid "\"interval\" time zone \"%s\" not valid" +msgstr "\"interval\" 時區 \"%s\" 無效" + +# utils/adt/datetime.c:1495 utils/adt/datetime.c:2370 +# utils/adt/formatting.c:3180 +#: utils/adt/datetime.c:1495 utils/adt/datetime.c:2360 +#: utils/adt/formatting.c:3181 +#, c-format +msgid "inconsistent use of year %04d and \"BC\"" +msgstr "" + +# utils/adt/datetime.c:3315 utils/adt/datetime.c:3322 +#: utils/adt/datetime.c:3305 utils/adt/datetime.c:3312 +#, c-format +msgid "date/time field value out of range: \"%s\"" +msgstr "date/time 欄位值超出範圍: \"%s\"" + +# utils/adt/datetime.c:3324 +#: utils/adt/datetime.c:3314 +msgid "Perhaps you need a different \"datestyle\" setting." +msgstr "或許您需要一個不同的 \"datestyle\" 設定。" + +# utils/adt/datetime.c:3329 +#: utils/adt/datetime.c:3319 +#, c-format +msgid "interval field value out of range: \"%s\"" +msgstr "interval 欄位值超出範圍: \"%s\"" + +# utils/adt/datetime.c:3335 +#: utils/adt/datetime.c:3325 +#, c-format +msgid "time zone displacement out of range: \"%s\"" +msgstr "" + +# translator: first %s is inet or cidr +# translator: first %s is inet or cidr +# utils/adt/datetime.c:3342 utils/adt/network.c:93 +#. translator: first %s is inet or cidr +#: utils/adt/datetime.c:3332 utils/adt/network.c:93 +#, c-format +msgid "invalid input syntax for type %s: \"%s\"" +msgstr "" + +# utils/adt/datum.c:80 utils/adt/datum.c:92 +#: utils/adt/datum.c:80 utils/adt/datum.c:92 +msgid "invalid Datum pointer" +msgstr "無效的Datum指標" + +# utils/adt/encode.c:55 utils/adt/encode.c:91 +#: utils/adt/encode.c:55 utils/adt/encode.c:91 +#, c-format +msgid "unrecognized encoding: \"%s\"" +msgstr "無法識別的編碼: \"%s\"" + +# utils/adt/encode.c:150 +#: utils/adt/encode.c:150 +#, c-format +msgid "invalid hexadecimal digit: \"%c\"" +msgstr "無效的十六進位數字: \"%c\"" + +# utils/adt/encode.c:178 +#: utils/adt/encode.c:178 +msgid "invalid hexadecimal data: odd number of digits" +msgstr "無效的十六進位資料: 奇數個數字" + +# utils/adt/encode.c:295 +#: utils/adt/encode.c:295 +msgid "unexpected \"=\"" +msgstr "預期外的\"=\"" + +# utils/adt/encode.c:307 +#: utils/adt/encode.c:307 +msgid "invalid symbol" +msgstr "不合法的符號" + +# utils/adt/encode.c:327 +#: utils/adt/encode.c:327 +msgid "invalid end sequence" +msgstr "" + +# utils/adt/encode.c:436 utils/adt/encode.c:501 utils/adt/varlena.c:118 +# utils/adt/varlena.c:158 +#: utils/adt/encode.c:436 utils/adt/encode.c:501 utils/adt/varlena.c:118 +#: utils/adt/varlena.c:158 +msgid "invalid input syntax for type bytea" +msgstr "" + +# utils/adt/float.c:219 +#: utils/adt/float.c:219 +msgid "type \"real\" value out of range: overflow" +msgstr "\"real\"型別超過範圍：overflow" + +# utils/adt/float.c:223 +#: utils/adt/float.c:223 +msgid "type \"real\" value out of range: underflow" +msgstr "\"real\"型別超過範圍：underflow" + +# utils/adt/float.c:238 +#: utils/adt/float.c:238 +msgid "type \"double precision\" value out of range: overflow" +msgstr "\"double precision\"型別超過範圍：overflow" + +# utils/adt/float.c:242 +#: utils/adt/float.c:242 +msgid "type \"double precision\" value out of range: underflow" +msgstr "\"double precision\"型別超過範圍：underflow" + +# utils/adt/float.c:280 +#: utils/adt/float.c:280 +msgid "deprecated input syntax for type real: \"\"" +msgstr "" + +# utils/adt/float.c:281 utils/adt/float.c:458 utils/adt/oid.c:46 +#: utils/adt/float.c:281 utils/adt/float.c:458 utils/adt/oid.c:46 +msgid "This input will be rejected in a future release of PostgreSQL." +msgstr "" + +# utils/adt/float.c:320 +#: utils/adt/float.c:320 +#, c-format +msgid "\"%s\" is out of range for type real" +msgstr "\"%s\" 超出 real 型別範圍" + +# utils/adt/float.c:325 utils/adt/float.c:349 +#: utils/adt/float.c:325 utils/adt/float.c:349 +#, c-format +msgid "invalid input syntax for type real: \"%s\"" +msgstr "real型別的輸入語法錯誤：\"%s\"" + +# utils/adt/float.c:457 +#: utils/adt/float.c:457 +msgid "deprecated input syntax for type double precision: \"\"" +msgstr "" + +# utils/adt/float.c:497 +#: utils/adt/float.c:497 +#, c-format +msgid "\"%s\" is out of range for type double precision" +msgstr "\"%s\" 超出 double precision 型別範圍" + +# utils/adt/float.c:502 utils/adt/float.c:526 utils/adt/numeric.c:3298 +# utils/adt/numeric.c:3324 +#: utils/adt/float.c:502 utils/adt/float.c:526 utils/adt/numeric.c:3298 +#: utils/adt/numeric.c:3324 +#, c-format +msgid "invalid input syntax for type double precision: \"%s\"" +msgstr "" + +# utils/adt/float.c:1131 utils/adt/float.c:1197 utils/adt/int.c:614 +# utils/adt/int.c:642 utils/adt/int.c:662 utils/adt/int.c:691 +# utils/adt/int.c:716 utils/adt/int.c:731 utils/adt/int.c:861 +# utils/adt/int.c:881 utils/adt/int.c:907 utils/adt/int.c:941 +# utils/adt/int.c:961 utils/adt/int.c:987 utils/adt/int.c:1012 +# utils/adt/int.c:1091 utils/adt/int8.c:947 utils/adt/numeric.c:1785 +# utils/adt/numeric.c:1794 utils/adt/varbit.c:1234 +#: utils/adt/float.c:1131 utils/adt/float.c:1197 utils/adt/int.c:614 +#: utils/adt/int.c:642 utils/adt/int.c:662 utils/adt/int.c:691 +#: utils/adt/int.c:716 utils/adt/int.c:731 utils/adt/int.c:861 +#: utils/adt/int.c:881 utils/adt/int.c:907 utils/adt/int.c:941 +#: utils/adt/int.c:961 utils/adt/int.c:987 utils/adt/int.c:1012 +#: utils/adt/int.c:1091 utils/adt/int8.c:947 utils/adt/numeric.c:1785 +#: utils/adt/numeric.c:1794 utils/adt/varbit.c:1234 +msgid "integer out of range" +msgstr "整數超過範圍" + +# utils/adt/float.c:1150 utils/adt/float.c:1216 utils/adt/int.c:297 +# utils/adt/int.c:747 utils/adt/int.c:775 utils/adt/int.c:795 +# utils/adt/int.c:815 utils/adt/int.c:841 utils/adt/int.c:1106 +# utils/adt/int8.c:972 utils/adt/numeric.c:1886 utils/adt/numeric.c:1897 +#: utils/adt/float.c:1150 utils/adt/float.c:1216 utils/adt/int.c:297 +#: utils/adt/int.c:747 utils/adt/int.c:775 utils/adt/int.c:795 +#: utils/adt/int.c:815 utils/adt/int.c:841 utils/adt/int.c:1106 +#: utils/adt/int8.c:972 utils/adt/numeric.c:1886 utils/adt/numeric.c:1897 +msgid "smallint out of range" +msgstr "smallint超過範圍" + +# utils/adt/float.c:1452 utils/adt/numeric.c:4220 +#: utils/adt/float.c:1452 utils/adt/numeric.c:4220 +msgid "cannot take square root of a negative number" +msgstr "" + +# utils/adt/float.c:1493 utils/adt/numeric.c:1704 +#: utils/adt/float.c:1493 utils/adt/numeric.c:1704 +msgid "invalid argument for power function" +msgstr "無效的power函式引數" + +# utils/adt/float.c:1508 utils/adt/float.c:1538 +#: utils/adt/float.c:1508 utils/adt/float.c:1538 +msgid "result is out of range" +msgstr "結果超過範圍" + +# utils/adt/float.c:1561 utils/adt/float.c:1591 utils/adt/numeric.c:4439 +#: utils/adt/float.c:1561 utils/adt/float.c:1591 utils/adt/numeric.c:4439 +msgid "cannot take logarithm of zero" +msgstr "" + +# utils/adt/float.c:1565 utils/adt/float.c:1595 utils/adt/numeric.c:4443 +#: utils/adt/float.c:1565 utils/adt/float.c:1595 utils/adt/numeric.c:4443 +msgid "cannot take logarithm of a negative number" +msgstr "" + +# utils/adt/float.c:1622 utils/adt/float.c:1647 utils/adt/float.c:1672 +# utils/adt/float.c:1698 utils/adt/float.c:1723 utils/adt/float.c:1748 +# utils/adt/float.c:1774 utils/adt/float.c:1799 +#: utils/adt/float.c:1622 utils/adt/float.c:1647 utils/adt/float.c:1672 +#: utils/adt/float.c:1698 utils/adt/float.c:1723 utils/adt/float.c:1748 +#: utils/adt/float.c:1774 utils/adt/float.c:1799 +msgid "input is out of range" +msgstr "輸入資料超過範圍" + +# utils/adt/formatting.c:985 +#: utils/adt/formatting.c:986 +msgid "\"9\" must be ahead of \"PR\"" +msgstr "" + +# utils/adt/formatting.c:1004 +#: utils/adt/formatting.c:1005 +msgid "\"0\" must be ahead of \"PR\"" +msgstr "" + +# utils/adt/formatting.c:1033 +#: utils/adt/formatting.c:1034 +msgid "multiple decimal points" +msgstr "多個小數點" + +# utils/adt/formatting.c:1040 utils/adt/formatting.c:1145 +#: utils/adt/formatting.c:1041 utils/adt/formatting.c:1146 +msgid "cannot use \"V\" and decimal point together" +msgstr "" + +# utils/adt/formatting.c:1055 +#: utils/adt/formatting.c:1056 +msgid "not unique \"S\"" +msgstr "" + +# utils/adt/formatting.c:1062 +#: utils/adt/formatting.c:1063 +msgid "cannot use \"S\" and \"PL\"/\"MI\"/\"SG\"/\"PR\" together" +msgstr "無法同時使用 \"S\" 和 \"PL\"/\"MI\"/\"SG\"/\"PR\"" + +# utils/adt/formatting.c:1086 +#: utils/adt/formatting.c:1087 +msgid "cannot use \"S\" and \"MI\" together" +msgstr "無法同時使用 \"S\" 和 \"MI\"" + +# utils/adt/formatting.c:1099 +#: utils/adt/formatting.c:1100 +msgid "cannot use \"S\" and \"PL\" together" +msgstr "無法同時使用 \"S\" 和 \"PL\"" + +# utils/adt/formatting.c:1112 +#: utils/adt/formatting.c:1113 +msgid "cannot use \"S\" and \"SG\" together" +msgstr "無法同時使用 \"S\" 和 \"SG\"" + +# utils/adt/formatting.c:1124 +#: utils/adt/formatting.c:1125 +msgid "cannot use \"PR\" and \"S\"/\"PL\"/\"MI\"/\"SG\" together" +msgstr "無法同時使用 \"PR\" 和 \"S\"/\"PL\"/\"MI\"/\"SG\"" + +# utils/adt/formatting.c:1154 +#: utils/adt/formatting.c:1155 +msgid "\"E\" is not supported" +msgstr "\"E\"未被支援" + +# utils/adt/formatting.c:1425 +#: utils/adt/formatting.c:1426 +#, c-format +msgid "\"%s\" is not a number" +msgstr "\"%s\"不是數字" + +# utils/adt/formatting.c:1688 +#: utils/adt/formatting.c:1689 +msgid "invalid AM/PM string" +msgstr "不合法的AM/PM字串" + +# utils/adt/formatting.c:2034 +#: utils/adt/formatting.c:2035 +msgid "\"TZ\"/\"tz\" not supported" +msgstr "\"TZ\"/\"tz\"不被支援" + +# utils/adt/formatting.c:2044 +#: utils/adt/formatting.c:2045 +#, c-format +msgid "invalid value for %s" +msgstr "%s 的值不合法" + +# utils/adt/formatting.c:3141 +#: utils/adt/formatting.c:3142 +msgid "AM/PM hour must be between 1 and 12" +msgstr "AM/PM 小時必須介於 1 到 12 之間" + +# utils/adt/formatting.c:3215 +#: utils/adt/formatting.c:3216 +msgid "cannot calculate day of year without year information" +msgstr "" + +# utils/adt/formatting.c:3994 +#: utils/adt/formatting.c:4082 +msgid "\"RN\" not supported" +msgstr "\"RN\"不被支援" + +# utils/adt/geo_ops.c:292 utils/adt/geo_ops.c:3953 utils/adt/geo_ops.c:4843 +#: utils/adt/geo_ops.c:292 utils/adt/geo_ops.c:3953 utils/adt/geo_ops.c:4843 +msgid "too many points requested" +msgstr "" + +# utils/adt/geo_ops.c:315 +#: utils/adt/geo_ops.c:315 +msgid "could not format \"path\" value" +msgstr "" + +# utils/adt/geo_ops.c:390 +#: utils/adt/geo_ops.c:390 +#, c-format +msgid "invalid input syntax for type box: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:903 +#: utils/adt/geo_ops.c:903 +#, c-format +msgid "invalid input syntax for type line: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:910 utils/adt/geo_ops.c:977 utils/adt/geo_ops.c:992 +# utils/adt/geo_ops.c:1004 +#: utils/adt/geo_ops.c:910 utils/adt/geo_ops.c:977 utils/adt/geo_ops.c:992 +#: utils/adt/geo_ops.c:1004 +msgid "type \"line\" not yet implemented" +msgstr "\"line\"型別未被實做" + +# utils/adt/geo_ops.c:1352 utils/adt/geo_ops.c:1375 +#: utils/adt/geo_ops.c:1352 utils/adt/geo_ops.c:1375 +#, c-format +msgid "invalid input syntax for type path: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:1412 +#: utils/adt/geo_ops.c:1412 +msgid "invalid number of points in external \"path\" value" +msgstr "" + +# utils/adt/geo_ops.c:1753 +#: utils/adt/geo_ops.c:1753 +#, c-format +msgid "invalid input syntax for type point: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:1981 +#: utils/adt/geo_ops.c:1981 +#, c-format +msgid "invalid input syntax for type lseg: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:2573 +#: utils/adt/geo_ops.c:2573 +msgid "function \"dist_lb\" not implemented" +msgstr "函式\"dist_lb\"未被實做" + +# utils/adt/geo_ops.c:3086 +#: utils/adt/geo_ops.c:3086 +msgid "function \"close_lb\" not implemented" +msgstr "函式\"close_lb\"未被實做" + +# utils/adt/geo_ops.c:3365 +#: utils/adt/geo_ops.c:3365 +msgid "cannot create bounding box for empty polygon" +msgstr "" + +# utils/adt/geo_ops.c:3389 utils/adt/geo_ops.c:3401 +#: utils/adt/geo_ops.c:3389 utils/adt/geo_ops.c:3401 +#, c-format +msgid "invalid input syntax for type polygon: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:3441 +#: utils/adt/geo_ops.c:3441 +msgid "invalid number of points in external \"polygon\" value" +msgstr "" + +# utils/adt/geo_ops.c:3751 +#: utils/adt/geo_ops.c:3751 +msgid "function \"poly_distance\" not implemented" +msgstr "函式\"poly_distance\"未被實做" + +# utils/adt/geo_ops.c:4063 +#: utils/adt/geo_ops.c:4063 +msgid "function \"path_center\" not implemented" +msgstr "函式\"path_center\"未被實做" + +# utils/adt/geo_ops.c:4080 +#: utils/adt/geo_ops.c:4080 +msgid "open path cannot be converted to polygon" +msgstr "" + +# utils/adt/geo_ops.c:4247 utils/adt/geo_ops.c:4257 utils/adt/geo_ops.c:4272 +# utils/adt/geo_ops.c:4278 +#: utils/adt/geo_ops.c:4247 utils/adt/geo_ops.c:4257 utils/adt/geo_ops.c:4272 +#: utils/adt/geo_ops.c:4278 +#, c-format +msgid "invalid input syntax for type circle: \"%s\"" +msgstr "" + +# utils/adt/geo_ops.c:4300 utils/adt/geo_ops.c:4308 +#: utils/adt/geo_ops.c:4300 utils/adt/geo_ops.c:4308 +msgid "could not format \"circle\" value" +msgstr "" + +# utils/adt/geo_ops.c:4335 +#: utils/adt/geo_ops.c:4335 +msgid "invalid radius in external \"circle\" value" +msgstr "" + +# utils/adt/geo_ops.c:4829 +#: utils/adt/geo_ops.c:4829 +msgid "cannot convert circle with radius zero to polygon" +msgstr "" + +# utils/adt/geo_ops.c:4834 +#: utils/adt/geo_ops.c:4834 +msgid "must request at least 2 points" +msgstr "" + +# utils/adt/geo_ops.c:4878 utils/adt/geo_ops.c:4901 +#: utils/adt/geo_ops.c:4878 utils/adt/geo_ops.c:4901 +msgid "cannot convert empty polygon to circle" +msgstr "" + +# utils/adt/int.c:137 +#: utils/adt/int.c:137 +msgid "int2vector has too many elements" +msgstr "" + +# utils/adt/int.c:1294 utils/adt/int8.c:1151 +#: utils/adt/int.c:1294 utils/adt/int8.c:1151 +msgid "step size may not equal zero" +msgstr "" + +# utils/adt/int8.c:101 utils/adt/int8.c:136 utils/adt/numutils.c:74 +# utils/adt/numutils.c:84 utils/adt/numutils.c:97 +#: utils/adt/int8.c:101 utils/adt/int8.c:136 utils/adt/numutils.c:74 +#: utils/adt/numutils.c:84 utils/adt/numutils.c:97 +#, c-format +msgid "invalid input syntax for integer: \"%s\"" +msgstr "無效的 integer 輸入語法: \"%s\"" + +# utils/adt/int8.c:117 +#: utils/adt/int8.c:117 +#, c-format +msgid "value \"%s\" is out of range for type bigint" +msgstr "值\"%s\"超過型別bigint的範圍" + +# utils/adt/int8.c:506 utils/adt/int8.c:534 utils/adt/int8.c:554 +# utils/adt/int8.c:583 utils/adt/int8.c:608 utils/adt/int8.c:626 +# utils/adt/int8.c:660 utils/adt/int8.c:705 utils/adt/int8.c:725 +# utils/adt/int8.c:751 utils/adt/int8.c:776 utils/adt/int8.c:796 +# utils/adt/int8.c:816 utils/adt/int8.c:842 utils/adt/int8.c:1010 +# utils/adt/int8.c:1049 utils/adt/numeric.c:1838 utils/adt/varbit.c:1313 +#: utils/adt/int8.c:506 utils/adt/int8.c:534 utils/adt/int8.c:554 +#: utils/adt/int8.c:583 utils/adt/int8.c:608 utils/adt/int8.c:626 +#: utils/adt/int8.c:660 utils/adt/int8.c:705 utils/adt/int8.c:725 +#: utils/adt/int8.c:751 utils/adt/int8.c:776 utils/adt/int8.c:796 +#: utils/adt/int8.c:816 utils/adt/int8.c:842 utils/adt/int8.c:1010 +#: utils/adt/int8.c:1049 utils/adt/numeric.c:1838 utils/adt/varbit.c:1313 +msgid "bigint out of range" +msgstr "bigint超過範圍" + +# utils/adt/int8.c:1066 +#: utils/adt/int8.c:1066 +msgid "OID out of range" +msgstr "OID 超出範圍" + +# utils/adt/oracle_compat.c:99 utils/adt/oracle_compat.c:138 +#: utils/adt/oracle_compat.c:99 utils/adt/oracle_compat.c:139 +msgid "invalid multibyte character for locale" +msgstr "" + +#: utils/adt/oracle_compat.c:100 +msgid "" +"The server's LC_CTYPE locale is probably incompatible with the database " +"encoding." +msgstr "" + +# utils/adt/oracle_compat.c:410 utils/adt/oracle_compat.c:507 +# utils/adt/oracle_compat.c:1131 +#: utils/adt/oracle_compat.c:411 utils/adt/oracle_compat.c:508 +#: utils/adt/oracle_compat.c:1132 +msgid "requested length too large" +msgstr "" + +# utils/adt/mac.c:65 +#: utils/adt/mac.c:65 +#, c-format +msgid "invalid input syntax for type macaddr: \"%s\"" +msgstr "" + +# utils/adt/mac.c:72 +#: utils/adt/mac.c:72 +#, c-format +msgid "invalid octet value in \"macaddr\" value: \"%s\"" +msgstr "" + +# utils/adt/mac.c:190 +#: utils/adt/mac.c:190 +msgid "text too long to convert to MAC address" +msgstr "" + +# utils/adt/misc.c:81 +#: utils/adt/misc.c:81 +msgid "must be superuser to signal other server processes" +msgstr "只有管理者能傳、信號至其他伺服器行程" + +# utils/adt/misc.c:90 +#: utils/adt/misc.c:90 +#, c-format +msgid "PID %d is not a PostgreSQL server process" +msgstr "PID %d 不是 PostgreSQL 伺服器行程" + +# utils/adt/misc.c:98 +#: utils/adt/misc.c:98 +#, c-format +msgid "could not send signal to process %d: %m" +msgstr "無法傳送信號至行程 %d: %m" + +# utils/adt/misc.c:156 +#: utils/adt/misc.c:156 +msgid "global tablespace never has databases" +msgstr "" + +# utils/adt/misc.c:177 +#: utils/adt/misc.c:177 +#, c-format +msgid "%u is not a tablespace OID" +msgstr "%u不是tablespace的OID" + +# utils/adt/nabstime.c:244 +#: utils/adt/nabstime.c:244 +#, c-format +msgid "invalid time zone name: \"%s\"" +msgstr "" + +# utils/adt/nabstime.c:596 utils/adt/nabstime.c:669 +#: utils/adt/nabstime.c:596 utils/adt/nabstime.c:669 +msgid "cannot convert abstime \"invalid\" to timestamp" +msgstr "" + +# utils/adt/nabstime.c:823 +#: utils/adt/nabstime.c:823 +#, c-format +msgid "invalid input syntax for type tinterval: \"%s\"" +msgstr "無效的 tinterval 型別輸入語法: \"%s\"" + +# utils/adt/nabstime.c:888 +#: utils/adt/nabstime.c:888 +msgid "invalid status in external \"tinterval\" value" +msgstr "" + +# utils/adt/nabstime.c:980 +#: utils/adt/nabstime.c:980 +msgid "cannot convert reltime \"invalid\" to interval" +msgstr "" + +# utils/adt/network.c:105 +#: utils/adt/network.c:105 +#, c-format +msgid "invalid cidr value: \"%s\"" +msgstr "不合法的cidr值：\"%s\"" + +# utils/adt/network.c:106 utils/adt/network.c:233 +#: utils/adt/network.c:106 utils/adt/network.c:233 +msgid "Value has bits set to right of mask." +msgstr "" + +# utils/adt/network.c:153 utils/adt/network.c:528 utils/adt/network.c:554 +# utils/adt/network.c:590 +#: utils/adt/network.c:153 utils/adt/network.c:528 utils/adt/network.c:554 +#: utils/adt/network.c:590 +#, c-format +msgid "could not format inet value: %m" +msgstr "" + +# utils/adt/network.c:198 +#: utils/adt/network.c:198 +msgid "invalid address family in external \"inet\" value" +msgstr "" + +# utils/adt/network.c:203 +#: utils/adt/network.c:203 +msgid "invalid bits in external \"inet\" value" +msgstr "" + +# utils/adt/network.c:209 +#: utils/adt/network.c:209 +msgid "invalid type in external \"inet\" value" +msgstr "" + +# utils/adt/network.c:214 +#: utils/adt/network.c:214 +msgid "invalid length in external \"inet\" value" +msgstr "" + +# utils/adt/network.c:232 +#: utils/adt/network.c:232 +msgid "invalid external \"cidr\" value" +msgstr "" + +# utils/adt/network.c:319 +#: utils/adt/network.c:319 +#, c-format +msgid "invalid mask length: %d" +msgstr "無效的mask長度：%d" + +# utils/adt/not_in.c:64 utils/adt/regproc.c:1110 utils/adt/regproc.c:1115 +# utils/adt/varlena.c:1636 utils/adt/varlena.c:1641 +#: utils/adt/not_in.c:64 utils/adt/regproc.c:1110 utils/adt/regproc.c:1115 +#: utils/adt/varlena.c:1636 utils/adt/varlena.c:1641 +msgid "invalid name syntax" +msgstr "無效的名稱語法" + +# utils/adt/not_in.c:65 +#: utils/adt/not_in.c:65 +msgid "Must provide \"relationname.columnname\"." +msgstr "" + +# utils/adt/numeric.c:397 +#: utils/adt/numeric.c:397 +msgid "invalid length in external \"numeric\" value" +msgstr "" + +# utils/adt/numeric.c:408 +#: utils/adt/numeric.c:408 +msgid "invalid sign in external \"numeric\" value" +msgstr "" + +# utils/adt/numeric.c:418 +#: utils/adt/numeric.c:418 +msgid "invalid digit in external \"numeric\" value" +msgstr "" + +# utils/adt/numeric.c:835 +#: utils/adt/numeric.c:835 +msgid "count must be greater than zero" +msgstr "" + +# utils/adt/numeric.c:848 +#: utils/adt/numeric.c:848 +msgid "lower bound cannot equal upper bound" +msgstr "下界不能等於上界" + +# utils/adt/numeric.c:1761 +#: utils/adt/numeric.c:1761 +msgid "cannot convert NaN to integer" +msgstr "無法將 NaN 轉換成 integer" + +# utils/adt/numeric.c:1829 +#: utils/adt/numeric.c:1829 +msgid "cannot convert NaN to bigint" +msgstr "無法將NaN轉換成bigint" + +# utils/adt/numeric.c:1877 +#: utils/adt/numeric.c:1877 +msgid "cannot convert NaN to smallint" +msgstr "無法將NaN轉換成smallint" + +# utils/adt/numeric.c:2720 utils/adt/numeric.c:2743 utils/adt/numeric.c:2767 +# utils/adt/numeric.c:2774 utils/adt/numeric.c:2788 +#: utils/adt/numeric.c:2720 utils/adt/numeric.c:2743 utils/adt/numeric.c:2767 +#: utils/adt/numeric.c:2774 utils/adt/numeric.c:2788 +#, c-format +msgid "invalid input syntax for type numeric: \"%s\"" +msgstr "" + +# utils/adt/numeric.c:3086 +#: utils/adt/numeric.c:3086 +msgid "value overflows numeric format" +msgstr "" + +# utils/adt/numeric.c:3156 +#: utils/adt/numeric.c:3156 +msgid "numeric field overflow" +msgstr "" + +# utils/adt/numeric.c:3157 +#: utils/adt/numeric.c:3157 +#, c-format +msgid "" +"The absolute value is greater than or equal to 10^%d for field with " +"precision %d, scale %d." +msgstr "" + +# utils/adt/numeric.c:4310 +#: utils/adt/numeric.c:4310 +msgid "argument for function \"exp\" too big" +msgstr "" + +# utils/adt/numeric.c:4692 +#: utils/adt/numeric.c:4692 +msgid "zero raised to zero is undefined" +msgstr "" + +# utils/adt/numutils.c:111 +#: utils/adt/numutils.c:111 +#, c-format +msgid "value \"%s\" is out of range for type integer" +msgstr "" + +# utils/adt/numutils.c:117 +#: utils/adt/numutils.c:117 +#, c-format +msgid "value \"%s\" is out of range for type smallint" +msgstr "值\"%s\"超過型別smallint的範圍" + +# utils/adt/numutils.c:123 +#: utils/adt/numutils.c:123 +#, c-format +msgid "value \"%s\" is out of range for 8-bit integer" +msgstr "" + +# utils/adt/oid.c:45 +#: utils/adt/oid.c:45 +msgid "deprecated input syntax for type oid: \"\"" +msgstr "" + +# utils/adt/oid.c:60 utils/adt/oid.c:66 utils/adt/oid.c:87 +#: utils/adt/oid.c:60 utils/adt/oid.c:66 utils/adt/oid.c:87 +#, c-format +msgid "invalid input syntax for type oid: \"%s\"" +msgstr "無效的 oid 型別輸入語法: \"%s\"" + +# utils/adt/oid.c:72 utils/adt/oid.c:110 +#: utils/adt/oid.c:72 utils/adt/oid.c:110 +#, c-format +msgid "value \"%s\" is out of range for type oid" +msgstr "" + +# utils/adt/oid.c:188 +#: utils/adt/oid.c:188 +msgid "oidvector has too many elements" +msgstr "" + +# utils/adt/ruleutils.c:1719 +#: utils/adt/ruleutils.c:1615 +#, c-format +msgid "rule \"%s\" has unsupported event type %d" +msgstr "" + +# utils/adt/pseudotypes.c:94 +#: utils/adt/pseudotypes.c:94 +msgid "cannot accept a value of type any" +msgstr "" + +# utils/adt/pseudotypes.c:107 +#: utils/adt/pseudotypes.c:107 +msgid "cannot display a value of type any" +msgstr "" + +# utils/adt/pseudotypes.c:121 utils/adt/pseudotypes.c:149 +#: utils/adt/pseudotypes.c:121 utils/adt/pseudotypes.c:149 +msgid "cannot accept a value of type anyarray" +msgstr "" + +# utils/adt/pseudotypes.c:199 +#: utils/adt/pseudotypes.c:199 +msgid "cannot accept a value of type trigger" +msgstr "" + +# utils/adt/pseudotypes.c:212 +#: utils/adt/pseudotypes.c:212 +msgid "cannot display a value of type trigger" +msgstr "" + +# utils/adt/pseudotypes.c:226 +#: utils/adt/pseudotypes.c:226 +msgid "cannot accept a value of type language_handler" +msgstr "" + +# utils/adt/pseudotypes.c:239 +#: utils/adt/pseudotypes.c:239 +msgid "cannot display a value of type language_handler" +msgstr "" + +# utils/adt/pseudotypes.c:253 +#: utils/adt/pseudotypes.c:253 +msgid "cannot accept a value of type internal" +msgstr "" + +# utils/adt/pseudotypes.c:266 +#: utils/adt/pseudotypes.c:266 +msgid "cannot display a value of type internal" +msgstr "" + +# utils/adt/pseudotypes.c:280 +#: utils/adt/pseudotypes.c:280 +msgid "cannot accept a value of type opaque" +msgstr "" + +# utils/adt/pseudotypes.c:293 +#: utils/adt/pseudotypes.c:293 +msgid "cannot display a value of type opaque" +msgstr "" + +# utils/adt/pseudotypes.c:307 +#: utils/adt/pseudotypes.c:307 +msgid "cannot accept a value of type anyelement" +msgstr "" + +# utils/adt/pseudotypes.c:320 +#: utils/adt/pseudotypes.c:320 +msgid "cannot display a value of type anyelement" +msgstr "" + +# utils/adt/regexp.c:178 +#: utils/adt/regexp.c:155 utils/adt/regexp.c:241 +#, c-format +msgid "regular expression failed: %s" +msgstr "正規表示式不正確：%s" + +# utils/adt/regexp.c:178 +#: utils/adt/regexp.c:187 +#, c-format +msgid "invalid regular expression: %s" +msgstr "不合法的正規表示式：%s" + +# utils/adt/regproc.c:122 utils/adt/regproc.c:142 +#: utils/adt/regproc.c:122 utils/adt/regproc.c:142 +#, c-format +msgid "more than one function named \"%s\"" +msgstr "有一個以上的函式被命名為\"%s\"" + +# utils/adt/regproc.c:471 utils/adt/regproc.c:491 +#: utils/adt/regproc.c:471 utils/adt/regproc.c:491 +#, c-format +msgid "more than one operator named %s" +msgstr "有一個以上的operator被命名為 %s" + +# utils/adt/regproc.c:644 utils/adt/regproc.c:1276 +#: utils/adt/regproc.c:644 utils/adt/regproc.c:1276 +msgid "too many arguments" +msgstr "參數過多" + +# utils/adt/regproc.c:645 +#: utils/adt/regproc.c:645 +msgid "Provide two argument types for operator." +msgstr "" + +# utils/adt/regproc.c:1174 +#: utils/adt/regproc.c:1174 +msgid "expected a left parenthesis" +msgstr "預期應有左圓括號" + +# utils/adt/regproc.c:1190 +#: utils/adt/regproc.c:1190 +msgid "expected a right parenthesis" +msgstr "預期應有右圓括號" + +# utils/adt/regproc.c:1209 +#: utils/adt/regproc.c:1209 +msgid "expected a type name" +msgstr "預期應有型別名稱" + +# utils/adt/regproc.c:1241 +#: utils/adt/regproc.c:1241 +msgid "improper type name" +msgstr "不合適的型別名稱" + +# utils/adt/ri_triggers.c:337 utils/adt/ri_triggers.c:2743 +# utils/adt/ri_triggers.c:3248 utils/adt/ri_triggers.c:3285 +#: utils/adt/ri_triggers.c:338 utils/adt/ri_triggers.c:2744 +#: utils/adt/ri_triggers.c:3249 utils/adt/ri_triggers.c:3286 +#, c-format +msgid "insert or update on table \"%s\" violates foreign key constraint \"%s\"" +msgstr "" + +# utils/adt/ri_triggers.c:340 utils/adt/ri_triggers.c:2746 +#: utils/adt/ri_triggers.c:341 utils/adt/ri_triggers.c:2747 +msgid "MATCH FULL does not allow mixing of null and nonnull key values." +msgstr "" + +# utils/adt/ri_triggers.c:2482 utils/adt/ri_triggers.c:2971 +#: utils/adt/ri_triggers.c:2483 utils/adt/ri_triggers.c:2972 +#, c-format +msgid "function \"%s\" called with wrong number of trigger arguments" +msgstr "" + +# utils/adt/ri_triggers.c:2500 utils/adt/ri_triggers.c:2981 +#: utils/adt/ri_triggers.c:2501 utils/adt/ri_triggers.c:2982 +#, c-format +msgid "no target table given for trigger \"%s\" on table \"%s\"" +msgstr "" + +# utils/adt/ri_triggers.c:2503 utils/adt/ri_triggers.c:2984 +#: utils/adt/ri_triggers.c:2504 utils/adt/ri_triggers.c:2985 +msgid "" +"Remove this referential integrity trigger and its mates, then do ALTER TABLE " +"ADD CONSTRAINT." +msgstr "" + +# utils/adt/ri_triggers.c:2891 utils/adt/ri_triggers.c:2901 +# utils/adt/ri_triggers.c:3347 +#: utils/adt/ri_triggers.c:2892 utils/adt/ri_triggers.c:2902 +#: utils/adt/ri_triggers.c:3348 +#, c-format +msgid "" +"table \"%s\" does not have column \"%s\" referenced by constraint \"%s\"" +msgstr "" + +# utils/adt/ri_triggers.c:2921 +#: utils/adt/ri_triggers.c:2922 +#, c-format +msgid "function \"%s\" was not called by trigger manager" +msgstr "" + +# utils/adt/ri_triggers.c:2930 +#: utils/adt/ri_triggers.c:2931 +#, c-format +msgid "function \"%s\" must be fired AFTER ROW" +msgstr "" + +# utils/adt/ri_triggers.c:2938 +#: utils/adt/ri_triggers.c:2939 +#, c-format +msgid "function \"%s\" must be fired for INSERT" +msgstr "" + +# utils/adt/ri_triggers.c:2944 +#: utils/adt/ri_triggers.c:2945 +#, c-format +msgid "function \"%s\" must be fired for UPDATE" +msgstr "" + +# utils/adt/ri_triggers.c:2951 +#: utils/adt/ri_triggers.c:2952 +#, c-format +msgid "function \"%s\" must be fired for INSERT or UPDATE" +msgstr "" + +# utils/adt/ri_triggers.c:2958 +#: utils/adt/ri_triggers.c:2959 +#, c-format +msgid "function \"%s\" must be fired for DELETE" +msgstr "" + +# utils/adt/ri_triggers.c:3215 +#: utils/adt/ri_triggers.c:3216 +#, c-format +msgid "" +"referential integrity query on \"%s\" from constraint \"%s\" on \"%s\" gave " +"unexpected result" +msgstr "" + +# utils/adt/ri_triggers.c:3219 +#: utils/adt/ri_triggers.c:3220 +msgid "This is most likely due to a rule having rewritten the query." +msgstr "" + +# utils/adt/ri_triggers.c:3250 +#: utils/adt/ri_triggers.c:3251 +#, c-format +msgid "No rows were found in \"%s\"." +msgstr "" + +# utils/adt/ri_triggers.c:3287 +#: utils/adt/ri_triggers.c:3288 +#, c-format +msgid "Key (%s)=(%s) is not present in table \"%s\"." +msgstr "" + +# utils/adt/ri_triggers.c:3293 +#: utils/adt/ri_triggers.c:3294 +#, c-format +msgid "" +"update or delete on \"%s\" violates foreign key constraint \"%s\" on \"%s\"" +msgstr "" + +# utils/adt/ri_triggers.c:3296 +#: utils/adt/ri_triggers.c:3297 +#, c-format +msgid "Key (%s)=(%s) is still referenced from table \"%s\"." +msgstr "" + +# utils/adt/rowtypes.c:78 utils/adt/rowtypes.c:442 +#: utils/adt/rowtypes.c:78 utils/adt/rowtypes.c:442 +msgid "input of anonymous composite types is not implemented" +msgstr "" + +# utils/adt/rowtypes.c:125 utils/adt/rowtypes.c:152 utils/adt/rowtypes.c:176 +# utils/adt/rowtypes.c:184 utils/adt/rowtypes.c:234 utils/adt/rowtypes.c:242 +#: utils/adt/rowtypes.c:125 utils/adt/rowtypes.c:152 utils/adt/rowtypes.c:176 +#: utils/adt/rowtypes.c:184 utils/adt/rowtypes.c:234 utils/adt/rowtypes.c:242 +#, c-format +msgid "malformed record literal: \"%s\"" +msgstr "" + +# utils/adt/rowtypes.c:126 +#: utils/adt/rowtypes.c:126 +msgid "Missing left parenthesis." +msgstr "缺少左圓括號。" + +# utils/adt/rowtypes.c:153 +#: utils/adt/rowtypes.c:153 +msgid "Too few columns." +msgstr "欄位不足。" + +# utils/adt/rowtypes.c:178 utils/adt/rowtypes.c:186 +#: utils/adt/rowtypes.c:178 utils/adt/rowtypes.c:186 +msgid "Unexpected end of input." +msgstr "非預期的輸入終止。" + +# utils/adt/rowtypes.c:235 +#: utils/adt/rowtypes.c:235 +msgid "Too many columns." +msgstr "欄位過多。" + +# utils/adt/rowtypes.c:243 +#: utils/adt/rowtypes.c:243 +msgid "Junk after right parenthesis." +msgstr "" + +# utils/adt/rowtypes.c:491 +#: utils/adt/rowtypes.c:491 +#, c-format +msgid "wrong number of columns: %d, expected %d" +msgstr "" + +# utils/adt/rowtypes.c:515 +#: utils/adt/rowtypes.c:515 +#, c-format +msgid "wrong data type: %u, expected %u" +msgstr "錯誤的資料型別: %u, 預期應為 %u" + +# utils/adt/rowtypes.c:574 +#: utils/adt/rowtypes.c:574 +#, c-format +msgid "improper binary format in record column %d" +msgstr "" + +# utils/adt/timestamp.c:98 utils/adt/timestamp.c:339 +#: utils/adt/timestamp.c:98 utils/adt/timestamp.c:339 +#, c-format +msgid "timestamp out of range: \"%s\"" +msgstr "timestamp 超過範圍: \"%s\"" + +# utils/adt/timestamp.c:116 utils/adt/timestamp.c:357 +# utils/adt/timestamp.c:536 +#: utils/adt/timestamp.c:116 utils/adt/timestamp.c:357 +#: utils/adt/timestamp.c:536 +#, c-format +msgid "date/time value \"%s\" is no longer supported" +msgstr "date/time 的值 \"%s\" 已不再受支援" + +# utils/adt/timestamp.c:271 +#: utils/adt/timestamp.c:271 +#, c-format +msgid "timestamp(%d) precision must be between %d and %d" +msgstr "timestamp(%d) 精確度必須介於 %d 和 %d 之間" + +# utils/adt/timestamp.c:529 utils/adt/timestamp.c:2408 +# utils/adt/timestamp.c:2519 utils/adt/timestamp.c:3041 +#: utils/adt/timestamp.c:529 utils/adt/timestamp.c:2408 +#: utils/adt/timestamp.c:2519 utils/adt/timestamp.c:3054 +msgid "interval out of range" +msgstr "interval超過範圍" + +# utils/adt/timestamp.c:882 +#: utils/adt/timestamp.c:882 +#, c-format +msgid "interval(%d) precision must be between %d and %d" +msgstr "interval(%d) 精確度必須介於 %d 和 %d 之間" + +# utils/adt/timestamp.c:1882 +#: utils/adt/timestamp.c:1882 +msgid "cannot subtract infinite timestamps" +msgstr "" + +# utils/adt/timestamp.c:2579 +#: utils/adt/timestamp.c:2579 +#, c-format +msgid "invalid input syntax for type timestamp: \"%s\"" +msgstr "無效的 timestamp 型別輸入語法: \"%s\"" + +# utils/adt/timestamp.c:2639 +#: utils/adt/timestamp.c:2639 +#, c-format +msgid "invalid input syntax for type timestamp with time zone: \"%s\"" +msgstr "無效的 timestamp 型別帶時區輸入語法: \"%s\"" + +# utils/adt/timestamp.c:2700 +#: utils/adt/timestamp.c:2700 +#, c-format +msgid "invalid input syntax for type interval: \"%s\"" +msgstr "無效的 interval 型別輸入語法: \"%s\"" + +# utils/adt/timestamp.c:2811 utils/adt/timestamp.c:3344 +# utils/adt/timestamp.c:3401 +#: utils/adt/timestamp.c:2811 utils/adt/timestamp.c:3357 +#: utils/adt/timestamp.c:3414 +#, c-format +msgid "timestamp units \"%s\" not supported" +msgstr "" + +# utils/adt/timestamp.c:2825 utils/adt/timestamp.c:3411 +#: utils/adt/timestamp.c:2825 utils/adt/timestamp.c:3424 +#, c-format +msgid "timestamp units \"%s\" not recognized" +msgstr "" + +# utils/adt/timestamp.c:2939 utils/adt/timestamp.c:3565 +# utils/adt/timestamp.c:3603 +#: utils/adt/timestamp.c:2951 utils/adt/timestamp.c:3582 +#: utils/adt/timestamp.c:3620 +#, c-format +msgid "timestamp with time zone units \"%s\" not supported" +msgstr "" + +# utils/adt/timestamp.c:2955 utils/adt/timestamp.c:3612 +#: utils/adt/timestamp.c:2968 utils/adt/timestamp.c:3629 +#, c-format +msgid "timestamp with time zone units \"%s\" not recognized" +msgstr "" + +# utils/adt/timestamp.c:3034 utils/adt/timestamp.c:3718 +#: utils/adt/timestamp.c:3047 utils/adt/timestamp.c:3735 +#, c-format +msgid "interval units \"%s\" not supported" +msgstr "" + +# utils/adt/timestamp.c:3050 utils/adt/timestamp.c:3748 +#: utils/adt/timestamp.c:3063 utils/adt/timestamp.c:3765 +#, c-format +msgid "interval units \"%s\" not recognized" +msgstr "" + +# utils/adt/timestamp.c:3074 +#: utils/adt/timestamp.c:3087 +msgid "cannot calculate week number without year information" +msgstr "" + +# utils/adt/timestamp.c:3819 utils/adt/timestamp.c:3968 +#: utils/adt/timestamp.c:3836 utils/adt/timestamp.c:3985 +#, c-format +msgid "interval time zone \"%s\" must not specify month" +msgstr "" + +# utils/adt/selfuncs.c:3409 utils/adt/selfuncs.c:3796 +#: utils/adt/selfuncs.c:3370 utils/adt/selfuncs.c:3757 +msgid "case insensitive matching not supported on type bytea" +msgstr "bytea 型別不支援不區分大小寫的匹配" + +# utils/adt/selfuncs.c:3514 utils/adt/selfuncs.c:3957 +#: utils/adt/selfuncs.c:3475 utils/adt/selfuncs.c:3918 +msgid "regular-expression matching not supported on type bytea" +msgstr "bytea 型別不支援正規表示式匹配" + +# utils/adt/tid.c:66 utils/adt/tid.c:74 utils/adt/tid.c:82 +#: utils/adt/tid.c:66 utils/adt/tid.c:74 utils/adt/tid.c:82 +#, c-format +msgid "invalid input syntax for type tid: \"%s\"" +msgstr "無效的 tid 型別輸入語法: \"%s\"" + +# utils/adt/varbit.c:109 utils/adt/varbit.c:263 +#: utils/adt/varbit.c:109 utils/adt/varbit.c:263 +#, c-format +msgid "bit string length %d does not match type bit(%d)" +msgstr "" + +# utils/adt/varbit.c:131 utils/adt/varbit.c:370 +#: utils/adt/varbit.c:131 utils/adt/varbit.c:370 +#, c-format +msgid "\"%c\" is not a valid binary digit" +msgstr "" + +# utils/adt/varbit.c:156 utils/adt/varbit.c:395 +#: utils/adt/varbit.c:156 utils/adt/varbit.c:395 +#, c-format +msgid "\"%c\" is not a valid hexadecimal digit" +msgstr "" + +# utils/adt/varbit.c:348 utils/adt/varbit.c:532 +#: utils/adt/varbit.c:348 utils/adt/varbit.c:532 +#, c-format +msgid "bit string too long for type bit varying(%d)" +msgstr "" + +# utils/adt/varbit.c:472 +#: utils/adt/varbit.c:472 +msgid "invalid length in external bit string" +msgstr "" + +# utils/adt/varbit.c:905 +#: utils/adt/varbit.c:905 +msgid "cannot AND bit strings of different sizes" +msgstr "" + +# utils/adt/varbit.c:946 +#: utils/adt/varbit.c:946 +msgid "cannot OR bit strings of different sizes" +msgstr "" + +# utils/adt/varbit.c:992 +#: utils/adt/varbit.c:992 +msgid "cannot XOR bit strings of different sizes" +msgstr "" + +# utils/adt/varchar.c:105 utils/adt/varchar.c:225 +#: utils/adt/varchar.c:105 utils/adt/varchar.c:225 +#, c-format +msgid "value too long for type character(%d)" +msgstr "" + +# utils/adt/varchar.c:383 utils/adt/varchar.c:475 +#: utils/adt/varchar.c:383 utils/adt/varchar.c:475 +#, c-format +msgid "value too long for type character varying(%d)" +msgstr "" + +# utils/adt/varlena.c:582 utils/adt/varlena.c:646 utils/adt/varlena.c:1312 +#: utils/adt/varlena.c:582 utils/adt/varlena.c:646 utils/adt/varlena.c:1312 +msgid "negative substring length not allowed" +msgstr "" + +# utils/adt/varlena.c:1407 utils/adt/varlena.c:1438 utils/adt/varlena.c:1474 +# utils/adt/varlena.c:1517 +#: utils/adt/varlena.c:1407 utils/adt/varlena.c:1438 utils/adt/varlena.c:1474 +#: utils/adt/varlena.c:1517 +#, c-format +msgid "index %d out of valid range, 0..%d" +msgstr "索引 %d 超出有效範圍，0..%d" + +# utils/adt/varlena.c:1529 +#: utils/adt/varlena.c:1529 +msgid "new bit must be 0 or 1" +msgstr "新位元必須是 0 或 1" + +# utils/adt/varlena.c:2016 +#: utils/adt/varlena.c:2016 +msgid "field position must be greater than zero" +msgstr "" + +# utils/cache/lsyscache.c:1679 utils/cache/lsyscache.c:1715 +# utils/cache/lsyscache.c:1751 utils/cache/lsyscache.c:1787 +#: utils/cache/lsyscache.c:1687 utils/cache/lsyscache.c:1723 +#: utils/cache/lsyscache.c:1759 utils/cache/lsyscache.c:1795 +#, c-format +msgid "type %s is only a shell" +msgstr "" + +# utils/cache/lsyscache.c:1684 +#: utils/cache/lsyscache.c:1692 +#, c-format +msgid "no input function available for type %s" +msgstr "" + +# utils/cache/lsyscache.c:1720 +#: utils/cache/lsyscache.c:1728 +#, c-format +msgid "no output function available for type %s" +msgstr "" + +# utils/cache/relcache.c:3264 +#: utils/cache/relcache.c:3293 +#, c-format +msgid "could not create relation-cache initialization file \"%s\": %m" +msgstr "" + +# utils/cache/relcache.c:3266 +#: utils/cache/relcache.c:3295 +msgid "Continuing anyway, but there's something wrong." +msgstr "" + +# utils/cache/typcache.c:414 +#: utils/cache/typcache.c:414 +#, c-format +msgid "type %s is not composite" +msgstr "" + +# utils/cache/typcache.c:428 +#: utils/cache/typcache.c:428 +msgid "record type has not been registered" +msgstr "" + +# utils/error/assert.c:34 +#: utils/error/assert.c:34 +msgid "TRAP: ExceptionalCondition: bad arguments\n" +msgstr "" + +# utils/error/assert.c:37 +#: utils/error/assert.c:37 +#, c-format +msgid "TRAP: %s(\"%s\", File: \"%s\", Line: %d)\n" +msgstr "" + +# utils/error/elog.c:1128 +#: utils/error/elog.c:1128 +#, c-format +msgid "could not reopen file \"%s\" as stderr: %m" +msgstr "" + +# utils/error/elog.c:1141 +#: utils/error/elog.c:1141 +#, c-format +msgid "could not reopen file \"%s\" as stdout: %m" +msgstr "" + +# utils/error/elog.c:1350 utils/error/elog.c:1360 +#: utils/error/elog.c:1350 utils/error/elog.c:1360 +msgid "[unknown]" +msgstr "" + +# utils/error/elog.c:1488 utils/error/elog.c:1681 utils/error/elog.c:1757 +#: utils/error/elog.c:1488 utils/error/elog.c:1681 utils/error/elog.c:1757 +msgid "missing error text" +msgstr "" + +# utils/error/elog.c:1491 utils/error/elog.c:1494 utils/error/elog.c:1760 +# utils/error/elog.c:1763 +#: utils/error/elog.c:1491 utils/error/elog.c:1494 utils/error/elog.c:1760 +#: utils/error/elog.c:1763 +#, c-format +msgid " at character %d" +msgstr "於字元%d" + +# utils/error/elog.c:1504 +#: utils/error/elog.c:1504 +msgid "DETAIL: " +msgstr "詳細：" + +# utils/error/elog.c:1511 +#: utils/error/elog.c:1511 +msgid "HINT: " +msgstr "提示：" + +# utils/error/elog.c:1518 +#: utils/error/elog.c:1518 +msgid "QUERY: " +msgstr "查詢：" + +# utils/error/elog.c:1525 +#: utils/error/elog.c:1525 +msgid "CONTEXT: " +msgstr "" + +# utils/error/elog.c:1535 +#: utils/error/elog.c:1535 +#, c-format +msgid "LOCATION: %s, %s:%d\n" +msgstr "" + +# utils/error/elog.c:1542 +#: utils/error/elog.c:1542 +#, c-format +msgid "LOCATION: %s:%d\n" +msgstr "" + +# utils/error/elog.c:1555 +#: utils/error/elog.c:1555 +msgid "STATEMENT: " +msgstr "" + +# utils/error/elog.c:1873 +#: utils/error/elog.c:1873 +#, c-format +msgid "operating system error %d" +msgstr "作業系統錯誤 %d" + +# utils/error/elog.c:1896 +#: utils/error/elog.c:1896 +msgid "DEBUG" +msgstr "除錯" + +# utils/error/elog.c:1900 +#: utils/error/elog.c:1900 +msgid "LOG" +msgstr "" + +# utils/error/elog.c:1903 +#: utils/error/elog.c:1903 +msgid "INFO" +msgstr "" + +# utils/error/elog.c:1906 +#: utils/error/elog.c:1906 +msgid "NOTICE" +msgstr "注意" + +# utils/error/elog.c:1909 +#: utils/error/elog.c:1909 +msgid "WARNING" +msgstr "" + +# utils/error/elog.c:1912 +#: utils/error/elog.c:1912 +msgid "ERROR" +msgstr "錯誤" + +# utils/error/elog.c:1915 +#: utils/error/elog.c:1915 +msgid "FATAL" +msgstr "嚴重錯誤" + +# utils/error/elog.c:1918 +#: utils/error/elog.c:1918 +msgid "PANIC" +msgstr "" + +# utils/fmgr/fmgr.c:247 +#: utils/fmgr/fmgr.c:247 +#, c-format +msgid "internal function \"%s\" is not in internal lookup table" +msgstr "" + +# utils/fmgr/fmgr.c:449 +#: utils/fmgr/fmgr.c:449 +#, c-format +msgid "unrecognized API version %d reported by info function \"%s\"" +msgstr "" + +# utils/fmgr/fmgr.c:764 utils/fmgr/fmgr.c:1639 +#: utils/fmgr/fmgr.c:760 utils/fmgr/fmgr.c:1635 +#, c-format +msgid "function %u has too many arguments (%d, maximum is %d)" +msgstr "" + +# utils/fmgr/dfmgr.c:107 utils/fmgr/dfmgr.c:209 utils/fmgr/dfmgr.c:263 +#: utils/fmgr/dfmgr.c:107 utils/fmgr/dfmgr.c:209 utils/fmgr/dfmgr.c:263 +#, c-format +msgid "could not access file \"%s\": %m" +msgstr "無法存取檔案\"%s\"：%m" + +# utils/fmgr/dfmgr.c:145 +#: utils/fmgr/dfmgr.c:145 +#, c-format +msgid "could not load library \"%s\": %s" +msgstr "無法載入程式庫\"%s\"：%s" + +# utils/fmgr/dfmgr.c:175 +#: utils/fmgr/dfmgr.c:175 +#, c-format +msgid "could not find function \"%s\" in file \"%s\"" +msgstr "找不到函式\"%s\"於檔案\"%s\"" + +# utils/fmgr/dfmgr.c:354 +#: utils/fmgr/dfmgr.c:354 +#, c-format +msgid "invalid macro name in dynamic library path: %s" +msgstr "" + +# utils/fmgr/dfmgr.c:398 +#: utils/fmgr/dfmgr.c:398 +msgid "zero-length component in parameter \"dynamic_library_path\"" +msgstr "" + +# utils/fmgr/dfmgr.c:418 +#: utils/fmgr/dfmgr.c:418 +msgid "component in parameter \"dynamic_library_path\" is not an absolute path" +msgstr "" + +# utils/init/postinit.c:119 +#: utils/init/postinit.c:119 +#, c-format +msgid "database \"%s\", OID %u, has disappeared from pg_database" +msgstr "" + +# utils/init/postinit.c:130 +#: utils/init/postinit.c:130 +#, c-format +msgid "database \"%s\" is not currently accepting connections" +msgstr "資料庫 \"%s\" 目前並不接受連線。" + +# utils/init/postinit.c:278 +#: utils/init/postinit.c:285 +#, c-format +msgid "The database subdirectory \"%s\" is missing." +msgstr "遺失資料庫子目錄 \"%s\"。" + +# utils/init/postinit.c:283 +#: utils/init/postinit.c:290 +#, c-format +msgid "could not access directory \"%s\": %m" +msgstr "無法存取目錄 \"%s\": %m" + +# utils/init/postinit.c:292 +#: utils/init/postinit.c:299 +#, c-format +msgid "could not change directory to \"%s\": %m" +msgstr "無法切換目錄到 \"%s\": %m" + +# utils/init/postinit.c:375 +#: utils/init/postinit.c:382 +msgid "no users are defined in this database system" +msgstr "沒有任何使用者被定義在這個資料庫系統" + +# utils/init/postinit.c:376 +#: utils/init/postinit.c:383 +#, c-format +msgid "" +"You should immediately run CREATE USER \"%s\" WITH SYSID %d CREATEUSER;." +msgstr "您必須立刻執行 CREATE USER \"%s\" WITH SYSID %d CREATEUSER;。" + +# utils/init/postinit.c:412 +#: utils/init/postinit.c:423 +msgid "connection limit exceeded for non-superusers" +msgstr "非特權使用者連線數已達限制量" + +# utils/init/miscinit.c:403 +#: utils/init/miscinit.c:403 +msgid "permission denied to set session authorization" +msgstr "" + +# utils/init/miscinit.c:429 +#: utils/init/miscinit.c:429 +#, c-format +msgid "invalid user ID: %d" +msgstr "不合法的使用者ID：%d" + +# utils/init/miscinit.c:519 +#: utils/init/miscinit.c:519 +#, c-format +msgid "could not create lock file \"%s\": %m" +msgstr "無法建立鎖定檔\"%s\"：%m" + +# utils/init/miscinit.c:533 +#: utils/init/miscinit.c:533 +#, c-format +msgid "could not open lock file \"%s\": %m" +msgstr "無法開啟鎖定檔 \"%s\": %m" + +# utils/init/miscinit.c:539 +#: utils/init/miscinit.c:539 +#, c-format +msgid "could not read lock file \"%s\": %m" +msgstr "無法讀取鎖定檔\"%s\"：%m" + +# utils/init/miscinit.c:589 +#: utils/init/miscinit.c:589 +#, c-format +msgid "lock file \"%s\" already exists" +msgstr "鎖定檔 \"%s\" 已存在" + +# utils/init/miscinit.c:593 +#: utils/init/miscinit.c:593 +#, c-format +msgid "Is another postgres (PID %d) running in data directory \"%s\"?" +msgstr "" + +# utils/init/miscinit.c:595 +#: utils/init/miscinit.c:595 +#, c-format +msgid "Is another postmaster (PID %d) running in data directory \"%s\"?" +msgstr "" + +# utils/init/miscinit.c:598 +#: utils/init/miscinit.c:598 +#, c-format +msgid "Is another postgres (PID %d) using socket file \"%s\"?" +msgstr "" + +# utils/init/miscinit.c:600 +#: utils/init/miscinit.c:600 +#, c-format +msgid "Is another postmaster (PID %d) using socket file \"%s\"?" +msgstr "是否有另一個postmaster(PID %d)在使用socket檔\"%s\"？" + +# utils/init/miscinit.c:628 +#: utils/init/miscinit.c:628 +#, c-format +msgid "pre-existing shared memory block (key %lu, ID %lu) is still in use" +msgstr "既存的共享記憶體區塊 (key %lu, ID %lu) 仍在使用中。" + +# utils/init/miscinit.c:631 +#: utils/init/miscinit.c:631 +#, c-format +msgid "" +"If you're sure there are no old server processes still running, remove the " +"shared memory block with the command \"ipcrm\", or just delete the file \"%s" +"\"." +msgstr "如果您確定沒有舊伺服器的行程仍在運行，以 \"ipcrm\" 命令移除共享記憶體區塊，或直接刪除 \"%s\" 檔案。" + +# utils/init/miscinit.c:648 +#: utils/init/miscinit.c:648 +#, c-format +msgid "could not remove old lock file \"%s\": %m" +msgstr "無法移除舊的鎖定檔 \"%s\": %m" + +# utils/init/miscinit.c:650 +#: utils/init/miscinit.c:650 +msgid "" +"The file seems accidentally left over, but it could not be removed. Please " +"remove the file by hand and try again." +msgstr "檔案似乎意外地殘，但它無法被移除适請手動移除該檔案並重試适" + +# utils/init/miscinit.c:672 utils/init/miscinit.c:682 +#: utils/init/miscinit.c:672 utils/init/miscinit.c:682 +#, c-format +msgid "could not write lock file \"%s\": %m" +msgstr "無法寫入鎖定檔\"%s\"：%m" + +# utils/init/miscinit.c:792 utils/misc/guc.c:5074 +#: utils/init/miscinit.c:792 utils/misc/guc.c:4938 +#, c-format +msgid "could not read from file \"%s\": %m" +msgstr "無法讀取鎖定檔\"%s\"：%m" + +# utils/init/miscinit.c:883 utils/init/miscinit.c:896 +#: utils/init/miscinit.c:883 utils/init/miscinit.c:896 +#, c-format +msgid "\"%s\" is not a valid data directory" +msgstr "\"%s\" 不是有效的資料目錄" + +# utils/init/miscinit.c:885 +#: utils/init/miscinit.c:885 +#, c-format +msgid "File \"%s\" is missing." +msgstr "遺失檔案 \"%s\"。" + +# utils/init/miscinit.c:898 +#: utils/init/miscinit.c:898 +#, c-format +msgid "File \"%s\" does not contain valid data." +msgstr "檔案 \"%s\" 不含有效資料。" + +# utils/init/miscinit.c:900 +#: utils/init/miscinit.c:900 +msgid "You may need to initdb." +msgstr "您可能必須 initdb。" + +# utils/init/miscinit.c:908 +#: utils/init/miscinit.c:908 +#, c-format +msgid "" +"The data directory was initialized by PostgreSQL version %ld.%ld, which is " +"not compatible with this version %s." +msgstr "資料目錄是由 PostgreSQL 版本 %ld.%ld 初始化，並不相容於目前的版本 %s。" + +# utils/init/miscinit.c:950 +#: utils/init/miscinit.c:950 +msgid "invalid list syntax for parameter \"preload_libraries\"" +msgstr "" + +# utils/init/miscinit.c:996 +#: utils/init/miscinit.c:996 +#, c-format +msgid "preloaded library \"%s\" with initialization function \"%s\"" +msgstr "" + +# utils/init/miscinit.c:1000 +#: utils/init/miscinit.c:1000 +#, c-format +msgid "preloaded library \"%s\"" +msgstr "預先載入程式庫\"%s\"" + +# utils/mb/conv.c:376 +#: utils/mb/conv.c:376 +#, c-format +msgid "ignoring unconvertible UTF-8 character 0x%04x" +msgstr "忽略無法轉換的UTF-8字元0x%04x" + +# utils/mb/conv.c:406 +#: utils/mb/conv.c:406 +#, c-format +msgid "invalid encoding number: %d" +msgstr "無效的編碼編號：%d" + +# utils/mb/conv.c:445 +#: utils/mb/conv.c:445 +#, c-format +msgid "ignoring unconvertible %s character 0x%04x" +msgstr "忽略無法轉換的 %s 字元 0x%04x" + +# utils/mb/encnames.c:445 +#: utils/mb/encnames.c:445 +msgid "encoding name too long" +msgstr "編碼名稱過長" + +# utils/mb/mbutils.c:252 +#: utils/mb/mbutils.c:252 +#, c-format +msgid "" +"default conversion function for encoding \"%s\" to \"%s\" does not exist" +msgstr "" + +# utils/mb/mbutils.c:326 +#: utils/mb/mbutils.c:326 +#, c-format +msgid "invalid source encoding name \"%s\"" +msgstr "" + +# utils/mb/mbutils.c:331 +#: utils/mb/mbutils.c:331 +#, c-format +msgid "invalid destination encoding name \"%s\"" +msgstr "" + +# utils/mb/wchar.c:832 +#: utils/mb/wchar.c:832 +msgid "Unicode characters greater than or equal to 0x10000 are not supported" +msgstr "" + +# utils/mb/wchar.c:861 +#: utils/mb/wchar.c:861 +#, c-format +msgid "invalid byte sequence for encoding \"%s\": 0x%s" +msgstr "" + +# utils/misc/help_config.c:125 +#: utils/misc/help_config.c:125 +msgid "internal error: unrecognized run-time parameter type\n" +msgstr "" + +# utils/misc/guc.c:237 +#: utils/misc/guc.c:234 +msgid "Ungrouped" +msgstr "" + +# utils/misc/guc.c:239 +#: utils/misc/guc.c:236 +msgid "File Locations" +msgstr "" + +# utils/misc/guc.c:241 +#: utils/misc/guc.c:238 +msgid "Connections and Authentication" +msgstr "" + +# utils/misc/guc.c:243 +#: utils/misc/guc.c:240 +msgid "Connections and Authentication / Connection Settings" +msgstr "" + +# utils/misc/guc.c:245 +#: utils/misc/guc.c:242 +msgid "Connections and Authentication / Security and Authentication" +msgstr "" + +# utils/misc/guc.c:247 +#: utils/misc/guc.c:244 +msgid "Resource Usage" +msgstr "" + +# utils/misc/guc.c:249 +#: utils/misc/guc.c:246 +msgid "Resource Usage / Memory" +msgstr "" + +# utils/misc/guc.c:251 +#: utils/misc/guc.c:248 +msgid "Resource Usage / Free Space Map" +msgstr "" + +# utils/misc/guc.c:253 +#: utils/misc/guc.c:250 +msgid "Resource Usage / Kernel Resources" +msgstr "" + +# utils/misc/guc.c:255 +#: utils/misc/guc.c:252 +msgid "Write-Ahead Log" +msgstr "" + +# utils/misc/guc.c:257 +#: utils/misc/guc.c:254 +msgid "Write-Ahead Log / Settings" +msgstr "" + +# utils/misc/guc.c:259 +#: utils/misc/guc.c:256 +msgid "Write-Ahead Log / Checkpoints" +msgstr "" + +# utils/misc/guc.c:261 +#: utils/misc/guc.c:258 +msgid "Query Tuning" +msgstr "" + +# utils/misc/guc.c:263 +#: utils/misc/guc.c:260 +msgid "Query Tuning / Planner Method Configuration" +msgstr "" + +# utils/misc/guc.c:265 +#: utils/misc/guc.c:262 +msgid "Query Tuning / Planner Cost Constants" +msgstr "" + +# utils/misc/guc.c:267 +#: utils/misc/guc.c:264 +msgid "Query Tuning / Genetic Query Optimizer" +msgstr "" + +# utils/misc/guc.c:269 +#: utils/misc/guc.c:266 +msgid "Query Tuning / Other Planner Options" +msgstr "" + +# utils/misc/guc.c:271 +#: utils/misc/guc.c:268 +msgid "Reporting and Logging" +msgstr "" + +# utils/misc/guc.c:273 +#: utils/misc/guc.c:270 +msgid "Reporting and Logging / Where to Log" +msgstr "" + +# utils/misc/guc.c:275 +#: utils/misc/guc.c:272 +msgid "Reporting and Logging / When to Log" +msgstr "" + +# utils/misc/guc.c:277 +#: utils/misc/guc.c:274 +msgid "Reporting and Logging / What to Log" +msgstr "" + +# utils/misc/guc.c:279 +#: utils/misc/guc.c:276 +msgid "Statistics" +msgstr "" + +# utils/misc/guc.c:281 +#: utils/misc/guc.c:278 +msgid "Statistics / Monitoring" +msgstr "" + +# utils/misc/guc.c:283 +#: utils/misc/guc.c:280 +msgid "Statistics / Query and Index Statistics Collector" +msgstr "" + +# utils/misc/guc.c:285 +#: utils/misc/guc.c:282 +msgid "Client Connection Defaults" +msgstr "" + +# utils/misc/guc.c:287 +#: utils/misc/guc.c:284 +msgid "Client Connection Defaults / Statement Behavior" +msgstr "" + +# utils/misc/guc.c:289 +#: utils/misc/guc.c:286 +msgid "Client Connection Defaults / Locale and Formatting" +msgstr "" + +# utils/misc/guc.c:291 +#: utils/misc/guc.c:288 +msgid "Client Connection Defaults / Other Defaults" +msgstr "" + +# utils/misc/guc.c:293 +#: utils/misc/guc.c:290 +msgid "Lock Management" +msgstr "" + +# utils/misc/guc.c:295 +#: utils/misc/guc.c:292 +msgid "Version and Platform Compatibility" +msgstr "" + +# utils/misc/guc.c:297 +#: utils/misc/guc.c:294 +msgid "Version and Platform Compatibility / Previous PostgreSQL Versions" +msgstr "" + +# utils/misc/guc.c:299 +#: utils/misc/guc.c:296 +msgid "Version and Platform Compatibility / Other Platforms and Clients" +msgstr "" + +# utils/misc/guc.c:301 +#: utils/misc/guc.c:298 +msgid "Preset Options" +msgstr "" + +# utils/misc/guc.c:303 +#: utils/misc/guc.c:300 +msgid "Customized Options" +msgstr "" + +# utils/misc/guc.c:305 +#: utils/misc/guc.c:302 +msgid "Developer Options" +msgstr "開發人員選項" + +# utils/misc/guc.c:360 +#: utils/misc/guc.c:357 +msgid "Enables the planner's use of sequential-scan plans." +msgstr "" + +# utils/misc/guc.c:368 +#: utils/misc/guc.c:365 +msgid "Enables the planner's use of index-scan plans." +msgstr "" + +# utils/misc/guc.c:376 +#: utils/misc/guc.c:373 +msgid "Enables the planner's use of TID scan plans." +msgstr "" + +# utils/misc/guc.c:384 +#: utils/misc/guc.c:381 +msgid "Enables the planner's use of explicit sort steps." +msgstr "" + +# utils/misc/guc.c:392 +#: utils/misc/guc.c:389 +msgid "Enables the planner's use of hashed aggregation plans." +msgstr "" + +# utils/misc/guc.c:400 +#: utils/misc/guc.c:397 +msgid "Enables the planner's use of nested-loop join plans." +msgstr "" + +# utils/misc/guc.c:408 +#: utils/misc/guc.c:405 +msgid "Enables the planner's use of merge join plans." +msgstr "" + +# utils/misc/guc.c:416 +#: utils/misc/guc.c:413 +msgid "Enables the planner's use of hash join plans." +msgstr "" + +# utils/misc/guc.c:424 +#: utils/misc/guc.c:421 +msgid "Enables genetic query optimization." +msgstr "" + +# utils/misc/guc.c:425 +#: utils/misc/guc.c:422 +msgid "This algorithm attempts to do planning without exhaustive searching." +msgstr "" + +# utils/misc/guc.c:434 +#: utils/misc/guc.c:431 +msgid "Shows whether the current user is a superuser." +msgstr "顯示目前的使用者是否為管理者。" + +# utils/misc/guc.c:443 +#: utils/misc/guc.c:440 +msgid "Enables SSL connections." +msgstr "啟用SSL連線。" + +# utils/misc/guc.c:451 +#: utils/misc/guc.c:448 +msgid "Forces synchronization of updates to disk." +msgstr "" + +# utils/misc/guc.c:452 +#: utils/misc/guc.c:449 +msgid "" +"The server will use the fsync() system call in several places to make sure " +"that updates are physically written to disk. This insures that a database " +"cluster will recover to a consistent state after an operating system or " +"hardware crash." +msgstr "" + +# utils/misc/guc.c:462 +#: utils/misc/guc.c:459 +msgid "Continues processing past damaged page headers." +msgstr "" + +# utils/misc/guc.c:463 +#: utils/misc/guc.c:460 +msgid "" +"Detection of a damaged page header normally causes PostgreSQL to report an " +"error, aborting the current transaction. Setting zero_damaged_pages to true " +"causes the system to instead report a warning, zero out the damaged page, " +"and continue processing. This behavior will destroy data, namely all the " +"rows on the damaged page." +msgstr "" + +# utils/misc/guc.c:475 +#: utils/misc/guc.c:472 +msgid "Runs the server silently." +msgstr "靜默地運行伺服器。" + +# utils/misc/guc.c:476 +#: utils/misc/guc.c:473 +msgid "" +"If this parameter is set, the server will automatically run in the " +"background and any controlling terminals are dissociated." +msgstr "如果這個參數被設置，伺服器將自動在背景運行並和任何控制的終端機分離。" + +# utils/misc/guc.c:484 +#: utils/misc/guc.c:481 +msgid "Logs each successful connection." +msgstr "記錄每個成功的連線皂" + +# utils/misc/guc.c:492 +#: utils/misc/guc.c:489 +msgid "Logs end of a session, including duration." +msgstr "" + +# utils/misc/guc.c:502 +#: utils/misc/guc.c:499 +msgid "Turns on various assertion checks." +msgstr "" + +# utils/misc/guc.c:503 +#: utils/misc/guc.c:500 +msgid "This is a debugging aid." +msgstr "" + +# utils/misc/guc.c:514 utils/misc/guc.c:596 utils/misc/guc.c:669 +# utils/misc/guc.c:678 utils/misc/guc.c:687 utils/misc/guc.c:696 +# utils/misc/guc.c:1081 utils/misc/guc.c:1090 utils/misc/guc.c:1150 +#: utils/misc/guc.c:511 utils/misc/guc.c:593 utils/misc/guc.c:666 +#: utils/misc/guc.c:675 utils/misc/guc.c:684 utils/misc/guc.c:693 +#: utils/misc/guc.c:1078 utils/misc/guc.c:1087 utils/misc/guc.c:1145 +msgid "no description available" +msgstr "沒有敘述可用" + +#: utils/misc/guc.c:520 +msgid "Logs the duration of each completed SQL statement." +msgstr "" + +# utils/misc/guc.c:531 +#: utils/misc/guc.c:528 +msgid "Prints the parse tree to the server log." +msgstr "將剖析樹寫入伺服記log。" + +# utils/misc/guc.c:539 +#: utils/misc/guc.c:536 +msgid "Prints the parse tree after rewriting to server log." +msgstr "" + +# utils/misc/guc.c:547 +#: utils/misc/guc.c:544 +msgid "Prints the execution plan to server log." +msgstr "將執行計畫寫入伺服器log。" + +# utils/misc/guc.c:555 +#: utils/misc/guc.c:552 +msgid "Indents parse and plan tree displays." +msgstr "" + +# utils/misc/guc.c:563 +#: utils/misc/guc.c:560 +msgid "Writes parser performance statistics to the server log." +msgstr "" + +# utils/misc/guc.c:571 +#: utils/misc/guc.c:568 +msgid "Writes planner performance statistics to the server log." +msgstr "" + +# utils/misc/guc.c:579 +#: utils/misc/guc.c:576 +msgid "Writes executor performance statistics to the server log." +msgstr "" + +# utils/misc/guc.c:587 +#: utils/misc/guc.c:584 +msgid "Writes cumulative performance statistics to the server log." +msgstr "" + +# utils/misc/guc.c:607 +#: utils/misc/guc.c:604 +msgid "Uses the indented output format for EXPLAIN VERBOSE." +msgstr "" + +# utils/misc/guc.c:615 +#: utils/misc/guc.c:612 +msgid "Starts the server statistics-collection subprocess." +msgstr "啟動伺服器統計資料收集子行程。" + +# utils/misc/guc.c:623 +#: utils/misc/guc.c:620 +msgid "Zeroes collected statistics on server restart." +msgstr "" + +# utils/misc/guc.c:631 +#: utils/misc/guc.c:628 +msgid "Collects statistics about executing commands." +msgstr "" + +# utils/misc/guc.c:632 +#: utils/misc/guc.c:629 +msgid "" +"Enables the collection of statistics on the currently executing command of " +"each session, along with the time at which that command began execution." +msgstr "" + +# utils/misc/guc.c:641 +#: utils/misc/guc.c:638 +msgid "Collects row-level statistics on database activity." +msgstr "" + +# utils/misc/guc.c:649 +#: utils/misc/guc.c:646 +msgid "Collects block-level statistics on database activity." +msgstr "" + +# utils/misc/guc.c:658 +#: utils/misc/guc.c:655 +msgid "Generates debugging output for LISTEN and NOTIFY." +msgstr "" + +# utils/misc/guc.c:707 +#: utils/misc/guc.c:704 +msgid "Logs the host name in the connection logs." +msgstr "在連線記錄裡記錄主機名稱。" + +# utils/misc/guc.c:708 +#: utils/misc/guc.c:705 +msgid "" +"By default, connection logs only show the IP address of the connecting host. " +"If you want them to show the host name you can turn this on, but depending " +"on your host name resolution setup it might impose a non-negligible " +"performance penalty." +msgstr "" + +# utils/misc/guc.c:718 +#: utils/misc/guc.c:715 +msgid "Causes subtables to be included by default in various commands." +msgstr "" + +# utils/misc/guc.c:726 +#: utils/misc/guc.c:723 +msgid "Interprets ACST, CST, EST, and SAT as Australian time zones." +msgstr "" + +# utils/misc/guc.c:727 +#: utils/misc/guc.c:724 +msgid "" +"Otherwise they are interpreted as North/South American time zones and " +"Saturday." +msgstr "" + +# utils/misc/guc.c:735 +#: utils/misc/guc.c:732 +msgid "Encrypt passwords." +msgstr "加密密碼。" + +# utils/misc/guc.c:736 +#: utils/misc/guc.c:733 +msgid "" +"When a password is specified in CREATE USER or ALTER USER without writing " +"either ENCRYPTED or UNENCRYPTED, this parameter determines whether the " +"password is to be encrypted." +msgstr "" + +# utils/misc/guc.c:745 +#: utils/misc/guc.c:742 +msgid "Treats \"expr=NULL\" as \"expr IS NULL\"." +msgstr "將\"expr=NULL\"視為\"expr IS NULL\"。" + +# utils/misc/guc.c:746 +#: utils/misc/guc.c:743 +msgid "" +"When turned on, expressions of the form expr = NULL (or NULL = expr) are " +"treated as expr IS NULL, that is, they return true if expr evaluates to the " +"null value, and false otherwise. The correct behavior of expr = NULL is to " +"always return null (unknown)." +msgstr "" + +# utils/misc/guc.c:757 +#: utils/misc/guc.c:754 +msgid "Enables per-database user names." +msgstr "" + +# utils/misc/guc.c:766 +#: utils/misc/guc.c:763 +msgid "This parameter doesn't do anything." +msgstr "這個參數不做任何事。" + +# utils/misc/guc.c:767 +#: utils/misc/guc.c:764 +msgid "" +"It's just here so that we won't choke on SET AUTOCOMMIT TO ON from 7.3-" +"vintage clients." +msgstr "" + +# utils/misc/guc.c:775 +#: utils/misc/guc.c:772 +msgid "Sets the default read-only status of new transactions." +msgstr "" + +# utils/misc/guc.c:783 +#: utils/misc/guc.c:780 +msgid "Sets the current transaction's read-only status." +msgstr "" + +# utils/misc/guc.c:792 +#: utils/misc/guc.c:789 +msgid "Automatically adds missing table references to FROM clauses." +msgstr "" + +# utils/misc/guc.c:800 +#: utils/misc/guc.c:797 +msgid "Check function bodies during CREATE FUNCTION." +msgstr "" + +# utils/misc/guc.c:808 +#: utils/misc/guc.c:805 +msgid "By default, newly-created tables should have OIDs." +msgstr "新建立的資料表預設會有OID。" + +# utils/misc/guc.c:816 +#: utils/misc/guc.c:813 +msgid "Start a subprocess to capture stderr output into log files." +msgstr "" + +# utils/misc/guc.c:824 +#: utils/misc/guc.c:821 +msgid "Truncate existing log files of same name during log rotation." +msgstr "" + +# utils/misc/guc.c:834 +#: utils/misc/guc.c:831 +msgid "Emit WAL-related debugging output." +msgstr "" + +# utils/misc/guc.c:845 +#: utils/misc/guc.c:842 +msgid "Datetimes are integer based" +msgstr "" + +# utils/misc/guc.c:868 +#: utils/misc/guc.c:865 +msgid "Sets the default statistics target." +msgstr "" + +# utils/misc/guc.c:869 +#: utils/misc/guc.c:866 +msgid "" +"This applies to table columns that have not had a column-specific target set " +"via ALTER TABLE SET STATISTICS." +msgstr "" + +# utils/misc/guc.c:877 +#: utils/misc/guc.c:874 +msgid "Sets the FROM-list size beyond which subqueries are not collapsed." +msgstr "" + +# utils/misc/guc.c:879 +#: utils/misc/guc.c:876 +msgid "" +"The planner will merge subqueries into upper queries if the resulting FROM " +"list would have no more than this many items." +msgstr "" + +# utils/misc/guc.c:888 +#: utils/misc/guc.c:885 +msgid "Sets the FROM-list size beyond which JOIN constructs are not flattened." +msgstr "" + +# utils/misc/guc.c:890 +#: utils/misc/guc.c:887 +msgid "" +"The planner will flatten explicit inner JOIN constructs into lists of FROM " +"items whenever a list of no more than this many items would result." +msgstr "" + +# utils/misc/guc.c:899 +#: utils/misc/guc.c:896 +msgid "Sets the threshold of FROM items beyond which GEQO is used." +msgstr "" + +# utils/misc/guc.c:907 +#: utils/misc/guc.c:904 +msgid "GEQO: effort is used to set the default for other GEQO parameters." +msgstr "" + +# utils/misc/guc.c:915 +#: utils/misc/guc.c:912 +msgid "GEQO: number of individuals in the population." +msgstr "" + +# utils/misc/guc.c:916 utils/misc/guc.c:924 +#: utils/misc/guc.c:913 utils/misc/guc.c:921 +msgid "Zero selects a suitable default value." +msgstr "" + +# utils/misc/guc.c:923 +#: utils/misc/guc.c:920 +msgid "GEQO: number of iterations of the algorithm." +msgstr "" + +# utils/misc/guc.c:932 +#: utils/misc/guc.c:929 +msgid "The time in milliseconds to wait on lock before checking for deadlock." +msgstr "" + +# utils/misc/guc.c:948 +#: utils/misc/guc.c:945 +msgid "Sets the maximum number of concurrent connections." +msgstr "設定最大同時連線數。" + +# utils/misc/guc.c:957 +#: utils/misc/guc.c:954 +msgid "Sets the number of connection slots reserved for superusers." +msgstr "設定保留給管理者的連線數。" + +# utils/misc/guc.c:966 +#: utils/misc/guc.c:963 +msgid "Sets the number of shared memory buffers used by the server." +msgstr "設定供伺服器使用的共享記憶體緩衝區數。" + +# utils/misc/guc.c:975 +#: utils/misc/guc.c:972 +msgid "Sets the TCP port the server listens on." +msgstr "設定伺服器傾聽的TCP連接埠。" + +# utils/misc/guc.c:984 +#: utils/misc/guc.c:981 +msgid "Sets the access permissions of the Unix-domain socket." +msgstr "設定Unix-domain socket的存取權限。" + +# utils/misc/guc.c:985 +#: utils/misc/guc.c:982 +msgid "" +"Unix-domain sockets use the usual Unix file system permission set. The " +"parameter value is expected to be an numeric mode specification in the form " +"accepted by the chmod and umask system calls. (To use the customary octal " +"format the number must start with a 0 (zero).)" +msgstr "" + +# utils/misc/guc.c:997 +#: utils/misc/guc.c:994 +msgid "Sets the maximum memory to be used for query workspaces." +msgstr "" + +# utils/misc/guc.c:998 +#: utils/misc/guc.c:995 +msgid "" +"This much memory may be used by each internal sort operation and hash table " +"before switching to temporary disk files." +msgstr "" + +# utils/misc/guc.c:1008 +#: utils/misc/guc.c:1005 +msgid "Sets the maximum memory to be used for maintenance operations." +msgstr "設定給維護性操作使用的最大記憶體量。" + +# utils/misc/guc.c:1009 +#: utils/misc/guc.c:1006 +msgid "This includes operations such as VACUUM and CREATE INDEX." +msgstr "這包括像 VACUUM 和 CREATE INDEX 的操作。" + +# utils/misc/guc.c:1017 +#: utils/misc/guc.c:1014 +msgid "Sets the maximum stack depth, in kilobytes." +msgstr "設定最大堆疊深度，以 kilobytes 為單位。" + +# utils/misc/guc.c:1026 +#: utils/misc/guc.c:1023 +msgid "Vacuum cost for a page found in the buffer cache." +msgstr "" + +# utils/misc/guc.c:1035 +#: utils/misc/guc.c:1032 +msgid "Vacuum cost for a page not found in the buffer cache." +msgstr "" + +# utils/misc/guc.c:1044 +#: utils/misc/guc.c:1041 +msgid "Vacuum cost for a page dirtied by vacuum." +msgstr "" + +# utils/misc/guc.c:1053 +#: utils/misc/guc.c:1050 +msgid "Vacuum cost amount available before napping." +msgstr "" + +# utils/misc/guc.c:1062 +#: utils/misc/guc.c:1059 +msgid "Vacuum cost delay in milliseconds." +msgstr "" + +# utils/misc/guc.c:1071 +#: utils/misc/guc.c:1068 +msgid "" +"Sets the maximum number of simultaneously open files for each server process." +msgstr "為每個伺服器行程設定可同時開啟的最大檔案數。" + +# utils/misc/guc.c:1101 +#: utils/misc/guc.c:1098 +msgid "Sets the maximum allowed duration (in milliseconds) of any statement." +msgstr "" + +# utils/misc/guc.c:1102 +#: utils/misc/guc.c:1099 +msgid "A value of 0 turns off the timeout." +msgstr "0 值關閉逾時機制。" + +# utils/misc/guc.c:1110 +#: utils/misc/guc.c:1107 +msgid "" +"Sets the maximum number of tables and indexes for which free space is " +"tracked." +msgstr "" + +# utils/misc/guc.c:1119 +#: utils/misc/guc.c:1115 +msgid "Sets the maximum number of disk pages for which free space is tracked." +msgstr "" + +# utils/misc/guc.c:1129 +#: utils/misc/guc.c:1124 +msgid "Sets the maximum number of locks per transaction." +msgstr "" + +# utils/misc/guc.c:1130 +#: utils/misc/guc.c:1125 +msgid "" +"The shared lock table is sized on the assumption that at most " +"max_locks_per_transaction * max_connections distinct objects will need to be " +"locked at any one time." +msgstr "" + +# utils/misc/guc.c:1140 +#: utils/misc/guc.c:1135 +msgid "Sets the maximum time in seconds to complete client authentication." +msgstr "" + +# utils/misc/guc.c:1160 +#: utils/misc/guc.c:1155 +msgid "" +"Sets the maximum distance in log segments between automatic WAL checkpoints." +msgstr "" + +# utils/misc/guc.c:1169 +#: utils/misc/guc.c:1164 +msgid "Sets the maximum time in seconds between automatic WAL checkpoints." +msgstr "" + +# utils/misc/guc.c:1178 +#: utils/misc/guc.c:1173 +msgid "" +"Logs if filling of checkpoint segments happens more frequently than this (in " +"seconds)." +msgstr "" + +# utils/misc/guc.c:1180 +#: utils/misc/guc.c:1175 +msgid "" +"Write a message to the server log if checkpoints caused by the filling of " +"checkpoint segment files happens more frequently than this number of " +"seconds. Zero turns off the warning." +msgstr "" + +# utils/misc/guc.c:1190 +#: utils/misc/guc.c:1185 +msgid "Sets the number of disk-page buffers in shared memory for WAL." +msgstr "" + +# utils/misc/guc.c:1199 +#: utils/misc/guc.c:1194 +msgid "" +"Sets the delay in microseconds between transaction commit and flushing WAL " +"to disk." +msgstr "" + +# utils/misc/guc.c:1209 +#: utils/misc/guc.c:1204 +msgid "" +"Sets the minimum concurrent open transactions before performing commit_delay." +msgstr "" + +# utils/misc/guc.c:1219 +#: utils/misc/guc.c:1214 +msgid "Sets the number of digits displayed for floating-point values." +msgstr "" + +# utils/misc/guc.c:1220 +#: utils/misc/guc.c:1215 +msgid "" +"This affects real, double precision, and geometric data types. The parameter " +"value is added to the standard number of digits (FLT_DIG or DBL_DIG as " +"appropriate)." +msgstr "" + +# utils/misc/guc.c:1230 +#: utils/misc/guc.c:1225 +msgid "" +"Sets the minimum execution time in milliseconds above which statements will " +"be logged." +msgstr "" + +# utils/misc/guc.c:1232 +#: utils/misc/guc.c:1227 +msgid "Zero prints all queries. The default is -1 (turning this feature off)." +msgstr "" + +# utils/misc/guc.c:1240 +#: utils/misc/guc.c:1235 +msgid "Interval to report shared buffer status in seconds" +msgstr "" + +# utils/misc/guc.c:1249 +#: utils/misc/guc.c:1244 +msgid "Background writer sleep time between rounds in milliseconds" +msgstr "" + +# utils/misc/guc.c:1258 +#: utils/misc/guc.c:1253 +msgid "Background writer percentage of dirty buffers to flush per round" +msgstr "" + +# utils/misc/guc.c:1267 +#: utils/misc/guc.c:1262 +msgid "Background writer maximum number of pages to flush per round" +msgstr "" + +# utils/misc/guc.c:1276 +#: utils/misc/guc.c:1271 +msgid "Automatic log file rotation will occur after N minutes" +msgstr "" + +# utils/misc/guc.c:1285 +#: utils/misc/guc.c:1280 +msgid "Automatic log file rotation will occur after N kilobytes" +msgstr "" + +# utils/misc/guc.c:1294 +#: utils/misc/guc.c:1289 +msgid "Shows the maximum number of function arguments." +msgstr "顯示最大函式引數數量。" + +# utils/misc/guc.c:1304 +#: utils/misc/guc.c:1299 +msgid "Shows the maximum number of index keys." +msgstr "顯示最大索引數。" + +# utils/misc/guc.c:1314 +#: utils/misc/guc.c:1309 +msgid "Shows the maximum identifier length" +msgstr "顯示識別字最大長度" + +# utils/misc/guc.c:1324 +#: utils/misc/guc.c:1319 +msgid "Shows size of a disk block" +msgstr "顯示磁碟區塊大小" + +# utils/misc/guc.c:1343 +#: utils/misc/guc.c:1338 +msgid "Sets the planner's assumption about size of the disk cache." +msgstr "" + +# utils/misc/guc.c:1344 +#: utils/misc/guc.c:1339 +msgid "" +"That is, the portion of the kernel's disk cache that will be used for " +"PostgreSQL data files. This is measured in disk pages, which are normally 8 " +"kB each." +msgstr "" + +# utils/misc/guc.c:1353 +#: utils/misc/guc.c:1348 +msgid "" +"Sets the planner's estimate of the cost of a nonsequentially fetched disk " +"page." +msgstr "" + +# utils/misc/guc.c:1355 +#: utils/misc/guc.c:1350 +msgid "" +"This is measured as a multiple of the cost of a sequential page fetch. A " +"higher value makes it more likely a sequential scan will be used, a lower " +"value makes it more likely an index scan will be used." +msgstr "" + +# utils/misc/guc.c:1365 +#: utils/misc/guc.c:1360 +msgid "Sets the planner's estimate of the cost of processing each tuple (row)." +msgstr "" + +# utils/misc/guc.c:1366 utils/misc/guc.c:1376 utils/misc/guc.c:1385 +#: utils/misc/guc.c:1361 utils/misc/guc.c:1371 utils/misc/guc.c:1380 +msgid "This is measured as a fraction of the cost of a sequential page fetch." +msgstr "" + +# utils/misc/guc.c:1374 +#: utils/misc/guc.c:1369 +msgid "" +"Sets the planner's estimate of processing cost for each index tuple (row) " +"during index scan." +msgstr "" + +# utils/misc/guc.c:1384 +#: utils/misc/guc.c:1379 +msgid "" +"Sets the planner's estimate of processing cost of each operator in WHERE." +msgstr "" + +# utils/misc/guc.c:1394 +#: utils/misc/guc.c:1389 +msgid "GEQO: selective pressure within the population." +msgstr "" + +# utils/misc/guc.c:1404 +#: utils/misc/guc.c:1399 +msgid "Sets the seed for random-number generation." +msgstr "" + +# utils/misc/guc.c:1423 +#: utils/misc/guc.c:1418 +msgid "WAL archiving command." +msgstr "WAL備份命令。" + +# utils/misc/guc.c:1424 +#: utils/misc/guc.c:1419 +msgid "The shell command that will be called to archive a WAL file." +msgstr "" + +# utils/misc/guc.c:1432 +#: utils/misc/guc.c:1427 +msgid "Sets the client's character set encoding." +msgstr "設定用戶端使用的字元集編碼。" + +# utils/misc/guc.c:1442 +#: utils/misc/guc.c:1437 +msgid "Sets the message levels that are sent to the client." +msgstr "設定送給用戶端的訊息等級。" + +# utils/misc/guc.c:1443 +#: utils/misc/guc.c:1438 +msgid "" +"Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, LOG, NOTICE, " +"WARNING, and ERROR. Each level includes all the levels that follow it. The " +"later the level, the fewer messages are sent." +msgstr "有效值為 DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, LOG, NOTICE, WARNING, 和 ERROR。每個等級都包含位於它之後的所有等級。越後面的等級送出越少的訊息。" + +# utils/misc/guc.c:1454 +#: utils/misc/guc.c:1449 +msgid "Sets the message levels that are logged." +msgstr "設定記茄的訊息等級。" + +# utils/misc/guc.c:1455 +#: utils/misc/guc.c:1450 +msgid "" +"Valid values are DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, INFO, NOTICE, " +"WARNING, ERROR, LOG, FATAL, and PANIC. Each level includes all the levels " +"that follow it." +msgstr "有效值為 DEBUG5, DEBUG4, DEBUG3, DEBUG2, DEBUG1, INFO, NOTICE, WARNING, ERROR, LOG, FATAL, 和 PANIC。每個等級都包含位於它之後的所有等級。" + +# utils/misc/guc.c:1465 +#: utils/misc/guc.c:1460 +msgid "Sets the verbosity of logged messages." +msgstr "設定記錄訊息的詳細程度。" + +# utils/misc/guc.c:1466 +#: utils/misc/guc.c:1461 +msgid "Valid values are \"terse\", \"default\", and \"verbose\"." +msgstr "有效值為 \"terse\", \"default\", 和 \"verbose\"。" + +# utils/misc/guc.c:1473 +#: utils/misc/guc.c:1468 +msgid "Sets the type of statements logged." +msgstr "設定要記錄的敘述類型。" + +# utils/misc/guc.c:1474 +#: utils/misc/guc.c:1469 +msgid "Valid values are \"none\", \"ddl\", \"mod\", and \"all\"." +msgstr "合法的值有\"none\"、\"ddl\"、\"mod\"和\"all\"。" + +# utils/misc/guc.c:1482 +#: utils/misc/guc.c:1477 +msgid "" +"Causes all statements generating error at or above this level to be logged." +msgstr "" + +# utils/misc/guc.c:1483 +#: utils/misc/guc.c:1478 +msgid "" +"All SQL statements that cause an error of the specified level or a higher " +"level are logged." +msgstr "所有發生比指定等級更高錯誤的SQL敘述都會被記錄。" + +# utils/misc/guc.c:1492 +#: utils/misc/guc.c:1487 +msgid "Controls information prefixed to each log line" +msgstr "" + +# utils/misc/guc.c:1493 +#: utils/misc/guc.c:1488 +msgid "if blank no prefix is used" +msgstr "" + +# utils/misc/guc.c:1502 +#: utils/misc/guc.c:1497 +msgid "Sets the display format for date and time values." +msgstr "設定日期和時間的顯示格式。" + +# utils/misc/guc.c:1503 +#: utils/misc/guc.c:1498 +msgid "Also controls interpretation of ambiguous date inputs." +msgstr "" + +#: utils/misc/guc.c:1508 +msgid "Sets the default tablespace to create tables and indexes in." +msgstr "" + +#: utils/misc/guc.c:1509 +msgid "An empty string selects the database's default tablespace." +msgstr "" + +# utils/misc/guc.c:1513 +#: utils/misc/guc.c:1517 +msgid "Sets the transaction isolation level of each new transaction." +msgstr "設定每個交易的交易隔離等級。" + +# utils/misc/guc.c:1514 +#: utils/misc/guc.c:1518 +msgid "" +"Each SQL transaction has an isolation level, which can be either \"read " +"uncommitted\", \"read committed\", \"repeatable read\", or \"serializable\"." +msgstr "每個SQL交易都有隔離等級，可以是\"read uncommitted\"、\"read committed\"、\"repeatable read\"或\"serializable\"。" + +# utils/misc/guc.c:1523 +#: utils/misc/guc.c:1527 +msgid "Sets the path for dynamically loadable modules." +msgstr "設定可動態載入模組的路徑。" + +# utils/misc/guc.c:1524 +#: utils/misc/guc.c:1528 +msgid "" +"If a dynamically loadable module needs to be opened and the specified name " +"does not have a directory component (i.e., the name does not contain a " +"slash), the system will search this path for the specified file." +msgstr "" + +# utils/misc/guc.c:1535 +#: utils/misc/guc.c:1540 +msgid "Sets the location of the Kerberos server key file." +msgstr "設定Kerberos伺服器金鑰所在位置。" + +# utils/misc/guc.c:1544 +#: utils/misc/guc.c:1550 +msgid "Sets the Rendezvous broadcast service name." +msgstr "設定Rendezvous廣播服務名稱。" + +# utils/misc/guc.c:1555 +#: utils/misc/guc.c:1561 +msgid "Shows the collation order locale." +msgstr "" + +# utils/misc/guc.c:1565 +#: utils/misc/guc.c:1571 +msgid "Shows the character classification and case conversion locale." +msgstr "" + +# utils/misc/guc.c:1575 +#: utils/misc/guc.c:1581 +msgid "Sets the language in which messages are displayed." +msgstr "設定顯示訊息時使用的語言" + +# utils/misc/guc.c:1584 +#: utils/misc/guc.c:1590 +msgid "Sets the locale for formatting monetary amounts." +msgstr "" + +# utils/misc/guc.c:1593 +#: utils/misc/guc.c:1599 +msgid "Sets the locale for formatting numbers." +msgstr "設定格式化數字時使用的locale。" + +# utils/misc/guc.c:1602 +#: utils/misc/guc.c:1608 +msgid "Sets the locale for formatting date and time values." +msgstr "設定格式化日期和時間時使用的locale。" + +# utils/misc/guc.c:1611 +#: utils/misc/guc.c:1617 +msgid "Lists shared libraries to preload into server." +msgstr "列出預先載入伺服器的共享程式庫。" + +# utils/misc/guc.c:1621 +#: utils/misc/guc.c:1627 +msgid "Sets the regular expression \"flavor\"." +msgstr "" + +# utils/misc/guc.c:1622 +#: utils/misc/guc.c:1628 +msgid "This can be set to advanced, extended, or basic." +msgstr "可以設定成advanced、extended或basic。" + +# utils/misc/guc.c:1630 +#: utils/misc/guc.c:1636 +msgid "Sets the schema search order for names that are not schema-qualified." +msgstr "" + +# utils/misc/guc.c:1641 +#: utils/misc/guc.c:1647 +msgid "Sets the server (database) character set encoding." +msgstr "設定伺服器(資料庫)使用的字元編碼。" + +# utils/misc/guc.c:1652 +#: utils/misc/guc.c:1658 +msgid "Shows the server version." +msgstr "顯示伺服器版本。" + +# utils/misc/guc.c:1663 +#: utils/misc/guc.c:1669 +msgid "Sets the session user name." +msgstr "設定 session 使用者名稱。" + +# utils/misc/guc.c:1673 +#: utils/misc/guc.c:1679 +msgid "Sets the destination for server log output." +msgstr "設定伺服器記錄輸出目的地。" + +# utils/misc/guc.c:1674 +#: utils/misc/guc.c:1680 +msgid "" +"Valid values are combinations of \"stderr\", \"syslog\", and \"eventlog\", " +"depending on the platform." +msgstr "" + +# utils/misc/guc.c:1683 +#: utils/misc/guc.c:1689 +msgid "Sets the destination directory for log files." +msgstr "設定伺服器記錄輸出目錄。" + +# utils/misc/guc.c:1684 +#: utils/misc/guc.c:1690 +msgid "May be specified as relative to the data directory or as absolute path." +msgstr "" + +# utils/misc/guc.c:1692 +#: utils/misc/guc.c:1699 +msgid "Sets the file name pattern for log files." +msgstr "設定log檔的檔名格式。" + +# utils/misc/guc.c:1702 +#: utils/misc/guc.c:1710 +msgid "Sets the syslog \"facility\" to be used when syslog enabled." +msgstr "設定當系統記錄啟用時的被使用的系統記錄 \"facility\"。" + +# utils/misc/guc.c:1703 +#: utils/misc/guc.c:1711 +msgid "" +"Valid values are LOCAL0, LOCAL1, LOCAL2, LOCAL3, LOCAL4, LOCAL5, LOCAL6, " +"LOCAL7." +msgstr "合法的值有LOCAL0、LOCAL1、LOCAL2、LOCAL3、LOCAL4、LOCAL5、LOCAL6、LOCAL7。" + +# utils/misc/guc.c:1711 +#: utils/misc/guc.c:1719 +msgid "Sets the program name used to identify PostgreSQL messages in syslog." +msgstr "設定用來在系統記錄中識別 PostgreSQL 訊息的程式名稱。" + +# utils/misc/guc.c:1722 +#: utils/misc/guc.c:1730 +msgid "Sets the time zone for displaying and interpreting time stamps." +msgstr "設定用來顯示或解讀timestamp的時區。" + +# utils/misc/guc.c:1731 +#: utils/misc/guc.c:1739 +msgid "Sets the current transaction's isolation level." +msgstr "設定目前交易的隔離等級。" + +# utils/misc/guc.c:1741 +#: utils/misc/guc.c:1749 +msgid "Sets the owning group of the Unix-domain socket." +msgstr "設定Unix-domain socket的所屬群組。" + +# utils/misc/guc.c:1742 +#: utils/misc/guc.c:1750 +msgid "" +"(The owning user of the socket is always the user that starts the server.)" +msgstr "(socket的所屬使用者永遠是啟動伺服器的使用者。)" + +# utils/misc/guc.c:1751 +#: utils/misc/guc.c:1759 +msgid "Sets the directory where the Unix-domain socket will be created." +msgstr "設定用來建立Unix-domain socket的目錄位置。" + +# utils/misc/guc.c:1760 +#: utils/misc/guc.c:1769 +msgid "Sets the host name or IP address(es) to listen to." +msgstr "設定要傾聽的主機名稱或IP位置。" + +# utils/misc/guc.c:1770 +#: utils/misc/guc.c:1779 +msgid "Selects the method used for forcing WAL updates out to disk." +msgstr "選擇強制將WAL更新寫入磁碟的方式。" + +#: utils/misc/guc.c:1788 +msgid "Sets the list of known custom variable classes." +msgstr "" + +# utils/misc/guc.c:1789 +#: utils/misc/guc.c:1798 +msgid "Sets the server's data directory." +msgstr "設定伺服器的資料目錄。" + +# utils/misc/guc.c:1798 +#: utils/misc/guc.c:1808 +msgid "Sets the server's main configuration file." +msgstr "設定伺服器的主要設定檔。" + +# utils/misc/guc.c:1808 +#: utils/misc/guc.c:1818 +msgid "Sets the server's \"hba\" configuration file" +msgstr "設定伺服器的\"hba\"設定檔" + +# utils/misc/guc.c:1817 +#: utils/misc/guc.c:1828 +msgid "Sets the server's \"ident\" configuration file" +msgstr "設定伺服器的\"ident\"設定檔" + +# utils/misc/guc.c:1826 +#: utils/misc/guc.c:1838 +msgid "Writes the postmaster PID to the specified file." +msgstr "將postmaster的PID寫入指定的檔案。" + +# utils/misc/guc.c:2482 +#: utils/misc/guc.c:2477 +#, c-format +msgid "" +"%s does not know where to find the server configuration file.\n" +"You must specify the --config-file or -D invocation option or set the PGDATA " +"environment variable.\n" +msgstr "" +"%s 不知道在哪裡可以找到伺服器設定檔。\n" +"您必須指定--config-file或-D選項，或使用PGDATA環境變數。\n" + +# utils/misc/guc.c:2507 +#: utils/misc/guc.c:2502 +#, c-format +msgid "%s cannot access the server configuration file \"%s\": %s\n" +msgstr "%s 無法存取伺服器設定檔\"%s\"：%s\n" + +# utils/misc/guc.c:2527 +#: utils/misc/guc.c:2522 +#, c-format +msgid "" +"%s does not know where to find the database system data.\n" +"This can be specified as \"data_directory\" in \"%s\", or by the -D " +"invocation option, or by the PGDATA environment variable.\n" +msgstr "" +"%s 不知道在哪裡可以找到資料庫系統的資料。\n" +"您必須指定\"data_directory\"於\"%ss\"或 -D 選項，或設定PGDATA環境變數。\n" + +# utils/misc/guc.c:2550 +#: utils/misc/guc.c:2545 +#, c-format +msgid "" +"%s does not know where to find the \"hba\" configuration file.\n" +"This can be specified as \"hba_file\" in \"%s\", or by the -D invocation " +"option, or by the PGDATA environment variable.\n" +msgstr "" +"%s 不知道在哪裡可以找到\"nba\"設定檔。\n" +"您必須指定\"hba_file\"於\"%s\"或 -D 選項，或設定PGDATA環境變數設。\n" + +# utils/misc/guc.c:2573 +#: utils/misc/guc.c:2568 +#, c-format +msgid "" +"%s does not know where to find the \"ident\" configuration file.\n" +"This can be specified as \"ident_file\" in \"%s\", or by the -D invocation " +"option, or by the PGDATA environment variable.\n" +msgstr "" +"%s 不知道在哪裡可以找到\"ident\"設定檔。\n" +"您必須指定\"ident_file\"於\"%s\"或 -D 選項，或設定PGDATA環境變數。\n" + +# utils/misc/guc.c:3281 utils/misc/guc.c:3970 utils/misc/guc.c:4006 +# utils/misc/guc.c:4062 utils/misc/guc.c:4399 utils/misc/guc.c:4548 +#: utils/misc/guc.c:3274 utils/misc/guc.c:3800 utils/misc/guc.c:3840 +#: utils/misc/guc.c:3915 utils/misc/guc.c:4251 utils/misc/guc.c:4402 +#, c-format +msgid "unrecognized configuration parameter \"%s\"" +msgstr "無法識別的設定參數\"%s\"" + +# utils/misc/guc.c:3300 +#: utils/misc/guc.c:3293 +#, c-format +msgid "parameter \"%s\" cannot be changed" +msgstr "參數\"%s\"不能被修改" + +# utils/misc/guc.c:3312 +#: utils/misc/guc.c:3305 +#, c-format +msgid "parameter \"%s\" cannot be changed after server start" +msgstr "參數\"%s\"在伺服器啟動後不能被修改" + +# utils/misc/guc.c:3322 +#: utils/misc/guc.c:3315 +#, c-format +msgid "parameter \"%s\" cannot be changed now" +msgstr "參數\"%s\"現在不能被修改" + +# utils/misc/guc.c:3352 +#: utils/misc/guc.c:3345 +#, c-format +msgid "parameter \"%s\" cannot be set after connection start" +msgstr "參數\"%s\"在連線後不能被修改" + +# utils/misc/guc.c:3362 utils/misc/guc.c:3896 +#: utils/misc/guc.c:3355 +#, c-format +msgid "permission denied to set parameter \"%s\"" +msgstr "權限不足無法設定參數\"%s\"" + +# utils/misc/guc.c:3419 +#: utils/misc/guc.c:3406 +#, c-format +msgid "parameter \"%s\" requires a Boolean value" +msgstr "參數\"%s\"要求Boolean值" + +# utils/misc/guc.c:3451 utils/misc/guc.c:3559 +#: utils/misc/guc.c:3422 utils/misc/guc.c:3506 +#, c-format +msgid "invalid value for parameter \"%s\": %d" +msgstr "給參數\"%s\"的值不合法：%d" + +# utils/misc/guc.c:3511 +#: utils/misc/guc.c:3482 +#, c-format +msgid "parameter \"%s\" requires an integer value" +msgstr "參數\"%s\"要求整數值" + +# utils/misc/guc.c:3519 +#: utils/misc/guc.c:3490 +#, c-format +msgid "%d is outside the valid range for parameter \"%s\" (%d .. %d)" +msgstr "%d 超出參數 \"%s\" 的有效範圍 (%d .. %d)" + +# utils/misc/guc.c:3619 +#: utils/misc/guc.c:3566 +#, c-format +msgid "parameter \"%s\" requires a numeric value" +msgstr "參數\"%s\"要求numeric值" + +# utils/misc/guc.c:3627 +#: utils/misc/guc.c:3574 +#, c-format +msgid "%g is outside the valid range for parameter \"%s\" (%g .. %g)" +msgstr "%g 超出參數 \"%s\" 的有效範圍 (%g .. %g)" + +# utils/misc/guc.c:3660 +#: utils/misc/guc.c:3590 +#, c-format +msgid "invalid value for parameter \"%s\": %g" +msgstr "給參數\"%s\"的值不合法：%g" + +# utils/misc/guc.c:3792 +#: utils/misc/guc.c:3688 +#, c-format +msgid "invalid value for parameter \"%s\": \"%s\"" +msgstr "給參數\"%s\"的值不合法：\"%s\"" + +# commands/user.c:1258 +#: utils/misc/guc.c:3804 utils/misc/guc.c:3844 utils/misc/guc.c:4406 +#, c-format +msgid "must be superuser to examine \"%s\"" +msgstr "只有管理者能能檢查\"%s\"" + +# utils/misc/guc.c:4071 +#: utils/misc/guc.c:3924 +#, c-format +msgid "SET %s takes only one argument" +msgstr "SET %s 只接受一個引數" + +# utils/misc/guc.c:4175 +#: utils/misc/guc.c:4028 +msgid "SET requires parameter name" +msgstr "SET需要參數名稱" + +# utils/misc/guc.c:4239 +#: utils/misc/guc.c:4092 +#, c-format +msgid "attempt to redefine parameter \"%s\"" +msgstr "試圖重新定義參數\"%s\"" + +# utils/misc/guc.c:5185 +#: utils/misc/guc.c:5049 +#, c-format +msgid "could not parse setting for parameter \"%s\"" +msgstr "無法解讀參數\"%s\"的設定" + +# utils/misc/guc.c:5383 +#: utils/misc/guc.c:5247 +msgid "invalid list syntax for parameter \"log_destination\"" +msgstr "參數\"log_destination\"的list語法錯誤" + +# utils/misc/guc.c:5406 +#: utils/misc/guc.c:5270 +#, c-format +msgid "unrecognized \"log_destination\" key word: \"%s\"" +msgstr "無法識別的\"log_destination\"關鍵字：\"%s\"" + +# utils/misc/guc.c:5640 +#: utils/misc/guc.c:5498 +msgid "SET AUTOCOMMIT TO OFF is no longer supported" +msgstr "SET AUTOCOMMIT TO OFF已不被支援" + +# utils/misc/guc.c:5688 +#: utils/misc/guc.c:5546 +#, c-format +msgid "invalid syntax for \"custom_variable_classes\": \"%s\"" +msgstr "\"custom_variable_classes\"語法錯誤：\"%s\"" + +# utils/misc/guc.c:5717 +#: utils/misc/guc.c:5575 +msgid "cannot enable parameter when \"log_statement_stats\" is true" +msgstr "當 \"log_statement_stats\" 為true時無法啟用參數" + +# utils/misc/guc.c:5734 +#: utils/misc/guc.c:5592 +msgid "" +"cannot enable \"log_statement_stats\" when \"log_parser_stats\", " +"\"log_planner_stats\", or \"log_executor_stats\" is true" +msgstr "" +"當\"log_parser_stats\"、\"log_planner_stats\"或\"log_executor_stats\"\n" +"為true時不能啟用\"log_statement_stats\"" + +# utils/misc/guc.c:5753 +#: utils/misc/guc.c:5611 +msgid "cannot set transaction read-write mode inside a read-only transaction" +msgstr "無法在唯讀交易中設定交易讀寫模式" + +# guc-file.l:267 +#: guc-file.l:271 +#, c-format +msgid "syntax error in file \"%s\" line %u, near end of line" +msgstr "語法匯誤於檔案\"%s\"列 %u，檔案結尾附近" + +# guc-file.l:272 +#: guc-file.l:276 +#, c-format +msgid "syntax error in file \"%s\" line %u, near token \"%s\"" +msgstr "語法錯誤於檔案\"%s\"列 %u，token\"%s\"附近" + +# utils/mmgr/portalmem.c:170 +#: utils/mmgr/portalmem.c:173 +#, c-format +msgid "cursor \"%s\" already exists" +msgstr "cursor \"%s\"已存在" + +# utils/mmgr/portalmem.c:174 +#: utils/mmgr/portalmem.c:177 +#, c-format +msgid "closing existing cursor \"%s\"" +msgstr "關閉存在的cursor \"%s\"" + +# utils/mmgr/aset.c:338 +#: utils/mmgr/aset.c:338 +#, c-format +msgid "Failed while creating memory context \"%s\"." +msgstr "建立記憶體context \"%s\"失敗。" + +# utils/mmgr/aset.c:504 utils/mmgr/aset.c:701 utils/mmgr/aset.c:894 +#: utils/mmgr/aset.c:504 utils/mmgr/aset.c:701 utils/mmgr/aset.c:894 +#, c-format +msgid "Failed on request of size %lu." +msgstr "要求大小 %lu 失敗。" + +# utils/sort/logtape.c:202 +#: utils/sort/logtape.c:202 +#, c-format +msgid "could not write block %ld of temporary file: %m" +msgstr "無法寫入暫存檔的區塊 %ld：%m" + +# utils/sort/logtape.c:204 +#: utils/sort/logtape.c:204 +msgid "Perhaps out of disk space?" +msgstr "可能是磁碟空間用盡？" + +# utils/sort/logtape.c:221 +#: utils/sort/logtape.c:221 +#, c-format +msgid "could not read block %ld of temporary file: %m" +msgstr "無法讀取暫存檔的區塊 %ld：%m" + +# utils/sort/tuplesort.c:2082 +#: utils/sort/tuplesort.c:2082 +msgid "could not create unique index" +msgstr "無法建立唯一索引" + +# utils/sort/tuplesort.c:2083 +#: utils/sort/tuplesort.c:2083 +msgid "Table contains duplicated values." +msgstr "資料表含有重覆的值。" + +# access/transam/slru.c:638 access/transam/xlog.c:1631 +# access/transam/xlog.c:2742 access/transam/xlog.c:2832 +# access/transam/xlog.c:2930 libpq/hba.c:911 libpq/hba.c:935 +# utils/error/elog.c:1118 utils/init/miscinit.c:783 utils/init/miscinit.c:889 +# utils/misc/database.c:68 +#: ../port/copydir.c:67 +#, c-format +msgid "could not copy file \"%s\": %m" +msgstr "無法複製檔案\"%s\"：%m" + +# commands/sequence.c:798 executor/execGrouping.c:328 +# executor/execGrouping.c:388 executor/nodeIndexscan.c:1051 lib/dllist.c:43 +# lib/dllist.c:88 libpq/auth.c:637 postmaster/pgstat.c:1006 +# postmaster/pgstat.c:1023 postmaster/pgstat.c:2452 postmaster/pgstat.c:2527 +# postmaster/pgstat.c:2572 postmaster/pgstat.c:2623 +# postmaster/postmaster.c:755 postmaster/postmaster.c:1625 +# postmaster/postmaster.c:2344 storage/buffer/localbuf.c:139 +# storage/file/fd.c:587 storage/file/fd.c:620 storage/file/fd.c:766 +# storage/ipc/sinval.c:789 storage/lmgr/lock.c:497 storage/smgr/md.c:138 +# storage/smgr/md.c:848 storage/smgr/smgr.c:213 utils/adt/cash.c:297 +# utils/adt/cash.c:312 utils/adt/oracle_compat.c:73 +# utils/adt/oracle_compat.c:124 utils/adt/regexp.c:191 +# utils/adt/ri_triggers.c:3471 utils/cache/relcache.c:164 +# utils/cache/relcache.c:178 utils/cache/relcache.c:1130 +# utils/cache/typcache.c:165 utils/cache/typcache.c:487 +# utils/fmgr/dfmgr.c:127 utils/fmgr/fmgr.c:521 utils/fmgr/fmgr.c:532 +# utils/init/miscinit.c:213 utils/init/miscinit.c:234 +# utils/init/miscinit.c:244 utils/misc/guc.c:1898 utils/misc/guc.c:1911 +# utils/misc/guc.c:1924 utils/mmgr/aset.c:337 utils/mmgr/aset.c:503 +# utils/mmgr/aset.c:700 utils/mmgr/aset.c:893 utils/mmgr/portalmem.c:75 +#: ../port/dirmod.c:75 ../port/dirmod.c:88 ../port/dirmod.c:101 +msgid "out of memory\n" +msgstr "記憶體用盡\n" + +#: ../port/dirmod.c:283 +#, c-format +msgid "Error setting junction for %s: %s" +msgstr "" + +# commands/tablespace.c:154 commands/tablespace.c:162 +# commands/tablespace.c:168 +#: ../port/exec.c:193 ../port/exec.c:307 ../port/exec.c:350 +#, c-format +msgid "could not identify current directory: %s" +msgstr "無法識別目前的目錄：%s" + +# utils/init/postinit.c:292 +#: ../port/exec.c:323 ../port/exec.c:359 +#, c-format +msgid "could not change directory to \"%s\"" +msgstr "無法切換目錄至\"%s\"" + +# commands/tablespace.c:355 commands/tablespace.c:984 +#: ../port/exec.c:338 +#, c-format +msgid "could not read symbolic link \"%s\"" +msgstr "無法讀取符號連結\"%s\"" + +#: ../port/exec.c:569 +#, c-format +msgid "child process exited with exit code %d" +msgstr "子行程結束，結束代碼 %d" + +#: ../port/exec.c:572 +#, c-format +msgid "child process was terminated by signal %d" +msgstr "子行程被信號 %d 結束" + +#: ../port/exec.c:575 +#, c-format +msgid "child process exited with unrecognized status %d" +msgstr "子行程結束，不明狀態代碼 %d" + +# utils/misc/guc.c:3899 +#~ msgid "Must be superuser to change this value to false." +#~ msgstr "只有管理者能將這個值設成false。" + +# utils/misc/guc.c:3901 +#~ msgid "Must be superuser to increase this value or turn it off." +#~ msgstr "只有管理者可以調低這個值或將其關閉。" + +# utils/misc/guc.c:3902 +#~ msgid "Must be superuser to increase this value." #~ msgstr "只有管理者可以調高這饋值" \ No newline at end of file diff --git a/src/bin/initdb/po/zh_TW.po b/src/bin/initdb/po/zh_TW.po index 31a217eb32..4f98802a6f 100644 --- a/src/bin/initdb/po/zh_TW.po +++ b/src/bin/initdb/po/zh_TW.po @@ -1,575 +1,575 @@ -# 2004-12-13 Zhenbang Wei -# -msgid "" -msgstr "" -"Project-Id-Version: PostgreSQL 8.0\n" -"POT-Creation-Date: 2004-12-13 01:05+0000\n" -"PO-Revision-Date: 2004-12-13 13:23+0800\n" -"Last-Translator: Zhenbang Wei \n" -"Language-Team: Zhenbang Wei \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#: initdb.c:250 initdb.c:264 -#, c-format -msgid "%s: out of memory\n" -msgstr "%s：記憶體用盡\n" - -#: initdb.c:374 initdb.c:1403 -#, c-format -msgid "%s: could not open file \"%s\" for reading: %s\n" -msgstr "%s：無法開啟檔案\"%s\"讀取資料: %s\n" - -#: initdb.c:435 initdb.c:1035 initdb.c:1062 -#, c-format -msgid "%s: could not open file \"%s\" for writing: %s\n" -msgstr "%s：無法開啟檔案\"%s\"寫入資料: %s\n" - -#: initdb.c:443 initdb.c:451 initdb.c:1042 initdb.c:1068 -#, c-format -msgid "%s: could not write file \"%s\": %s\n" -msgstr "%s：無法寫入檔案\"%s\"：%s\n" - -#: initdb.c:470 -#, c-format -msgid "%s: could not execute command \"%s\": %s\n" -msgstr "%s：無法執行命令\"%s\"：%s\n" - -#: initdb.c:593 -#, c-format -msgid "%s: removing data directory \"%s\"\n" -msgstr "%s：刪除資料目錄 \"%s\"\n" - -#: initdb.c:596 -#, c-format -msgid "%s: failed to remove data directory\n" -msgstr "%s：無法刪除資料目錄\n" - -#: initdb.c:602 -#, c-format -msgid "%s: removing contents of data directory \"%s\"\n" -msgstr "%s：刪除資料目錄\"%s\"的內容\n" - -#: initdb.c:605 -#, c-format -msgid "%s: failed to remove contents of data directory\n" -msgstr "%s：無法刪除資料目錄的內容\n" - -#: initdb.c:614 -#, c-format -msgid "%s: data directory \"%s\" not removed at user's request\n" -msgstr "%s：無法依使用者的要求刪除資料目錄 \"%s\"\n" - -#: initdb.c:640 -#, c-format -msgid "" -"%s: cannot be run as root\n" -"Please log in (using, e.g., \"su\") as the (unprivileged) user that will\n" -"own the server process.\n" -msgstr "" -"%s：無法以root身份執行\n" -"請以將會擁有伺服器行程的非特權使用者登入(例如用\"su\")。\n" - -#: initdb.c:689 -#, c-format -msgid "%s: \"%s\" is not a valid server encoding name\n" -msgstr "%s：\"%s\" 不是有效的伺服器編碼名稱\n" - -#: initdb.c:844 -#, c-format -msgid "%s: warning: encoding mismatch\n" -msgstr "%s：警告：編碼不符\n" - -#: initdb.c:846 -#, c-format -msgid "" -"The encoding you selected (%s) and the encoding that the selected\n" -"locale uses (%s) are not known to match. This may lead to\n" -"misbehavior in various character string processing functions. To fix\n" -"this situation, rerun %s and either do not specify an encoding\n" -"explicitly, or choose a matching combination.\n" -msgstr "" -"你選擇的編碼(%s)和locale使用的編碼(%s)不符，這樣可能會讓文\n" -"字處理函式出現異常行為，要修正這個問題，請重新執行 %s 且\n" -"不指定使用的編碼或是指定正確的編碼組合。\n" - -#: initdb.c:976 -#, c-format -msgid "%s: could not create directory \"%s\": %s\n" -msgstr "%s：無法建立目錄\"%s\"：%s\n" - -#: initdb.c:1004 -#, c-format -msgid "" -"%s: file \"%s\" does not exist\n" -"This means you have a corrupted installation or identified\n" -"the wrong directory with the invocation option -L.\n" -msgstr "" -"%s：檔案 \"%s\" 不存在\n" -"這表示你的安裝可能發生錯誤，或是指定了錯誤的\n" -"目錄給選項 -L。\n" - -#: initdb.c:1086 -msgid "selecting default max_connections ... " -msgstr "選擇預設的max_connections ..." - -#: initdb.c:1122 -msgid "selecting default shared_buffers ... " -msgstr "選擇預設的shared_buffers ..." - -#: initdb.c:1155 -msgid "creating configuration files ... " -msgstr "建立設定檔..." - -#: initdb.c:1251 -#, c-format -msgid "creating template1 database in %s/base/1 ... " -msgstr "建立 template1 資料庫於 %s/base/1 ... " - -#: initdb.c:1267 -#, c-format -msgid "" -"%s: input file \"%s\" does not belong to PostgreSQL %s\n" -"Check your installation or specify the correct path using the option -L.\n" -msgstr "" -"%s：輸入檔\"%s\"不屬於 PostgreSQL %s\n" -"請檢查你的安裝或用 -L 選項指定正確的路徑。\n" - -#: initdb.c:1342 -msgid "initializing pg_shadow ... " -msgstr "初始化pg_shadow..." - -#: initdb.c:1378 -msgid "Enter new superuser password: " -msgstr "輸入新的管理者密碼：" - -#: initdb.c:1379 -msgid "Enter it again: " -msgstr "再輸入一次：" - -#: initdb.c:1382 -msgid "Passwords didn't match.\n" -msgstr "密碼不符。\n" - -#: initdb.c:1409 -#, c-format -msgid "%s: could not read password from file \"%s\": %s\n" -msgstr "%s：無法從檔案\"%s\"讀取密碼：%s\n" - -#: initdb.c:1422 -msgid "setting password ... " -msgstr "設定密碼..." - -#: initdb.c:1443 -#, c-format -msgid "%s: The password file was not generated. Please report this problem.\n" -msgstr "%s：無法產生密碼檔，請回報這個錯誤。\n" - -#: initdb.c:1471 -msgid "enabling unlimited row size for system tables ... " -msgstr "啟用系統資料表的無資料筆數限制 ..." - -#: initdb.c:1544 -msgid "initializing pg_depend ... " -msgstr "初始化pg_depend..." - -#: initdb.c:1572 -msgid "creating system views ... " -msgstr "建立系統views..." - -#: initdb.c:1608 -msgid "loading pg_description ... " -msgstr "載入pg_description..." - -#: initdb.c:1647 -msgid "creating conversions ... " -msgstr "建立conversions ... " - -#: initdb.c:1701 -msgid "setting privileges on built-in objects ... " -msgstr "設定內建物件的權限 ... " - -#: initdb.c:1759 -msgid "creating information schema ... " -msgstr "建立information schema ... " - -#: initdb.c:1816 -msgid "vacuuming database template1 ... " -msgstr "重整資料庫template1 ..." - -#: initdb.c:1870 -msgid "copying template1 to template0 ... " -msgstr "複製template1到template0 ..." - -#: initdb.c:1927 -msgid "caught signal\n" -msgstr "捕捉到信號\n" - -#: initdb.c:1933 -#, c-format -msgid "could not write to child process: %s\n" -msgstr "無法寫至子行程：%s\n" - -#: initdb.c:1941 -msgid "ok\n" -msgstr "成功\n" - -#: initdb.c:1989 -#, c-format -msgid "%s: invalid locale name \"%s\"\n" -msgstr "%s：無效的locale名稱\"%s\"\n" - -#: initdb.c:2056 -#, c-format -msgid "" -"%s initializes a PostgreSQL database cluster.\n" -"\n" -msgstr "" -"%s 初始化PostgreSQL資料庫cluster。\n" -"\n" - -#: initdb.c:2057 -msgid "Usage:\n" -msgstr "使用方法：\n" - -#: initdb.c:2058 -#, c-format -msgid " %s [OPTION]... [DATADIR]\n" -msgstr " %s [選項]... [資料目錄]\n" - -#: initdb.c:2059 -msgid "" -"\n" -"Options:\n" -msgstr "" -"\n" -"選項：\n" - -#: initdb.c:2060 -msgid " [-D, --pgdata=]DATADIR location for this database cluster\n" -msgstr " [-D, --pgdata=]DATADIR 資料庫cluster的目錄\n" - -#: initdb.c:2061 -msgid " -E, --encoding=ENCODING set default encoding for new databases\n" -msgstr " -E, --encoding=ENCODING 新資料庫的預設編稼\n" - -#: initdb.c:2062 -msgid "" -" --locale=LOCALE initialize database cluster with given locale\n" -msgstr " --locale=LOCALE 以指定的locale初始化資料庫cluster\n" - -#: initdb.c:2063 -msgid "" -" --lc-collate, --lc-ctype, --lc-messages=LOCALE\n" -" --lc-monetary, --lc-numeric, --lc-time=LOCALE\n" -" initialize database cluster with given locale\n" -" in the respective category (default taken from\n" -" environment)\n" -msgstr "" -" --lc-collate, --lc-ctype, --lc-messages=LOCALE\n" -" --lc-monetary, --lc-numeric, --lc-time=LOCALE\n" -" 指定不同種類的locale以初始化資料庫cluster\n" -" (預設從環境變數取得)\n" - -#: initdb.c:2068 -msgid " --no-locale equivalent to --locale=C\n" -msgstr " --no-locale 功能同 --locale=C\n" - -#: initdb.c:2069 -msgid "" -" -A, --auth=METHOD default authentication method for local " -"connections\n" -msgstr " -A, --auth=METHOD 本地端預設的連線驗證方式\n" - -#: initdb.c:2070 -msgid " -U, --username=NAME database superuser name\n" -msgstr " -U, --username=NAME 資料庫管理者名稱\n" - -#: initdb.c:2071 -msgid "" -" -W, --pwprompt prompt for a password for the new superuser\n" -msgstr " -W, --pwprompt 詢問新管理者的密碼\n" - -#: initdb.c:2072 -msgid "" -" --pwfile=FILE read password for the new superuser from file\n" -msgstr " --pwfile=FILE 從檔案讀取新管理者的密碼\n" - -#: initdb.c:2073 -msgid " -?, --help show this help, then exit\n" -msgstr " -?, --help 顯示這份說明然後結束\n" - -#: initdb.c:2074 -msgid " -V, --version output version information, then exit\n" -msgstr " -V, --version 顯示版本資訊然後結束\n" - -#: initdb.c:2075 -msgid "" -"\n" -"Less commonly used options:\n" -msgstr "" -"\n" -"非常用選項:\n" - -#: initdb.c:2076 -msgid " -d, --debug generate lots of debugging output\n" -msgstr " -d, --debug 顯示除錯訊息\n" - -#: initdb.c:2077 -msgid " -s, --show show internal settings\n" -msgstr " -s, --show 顯示內部設定\n" - -#: initdb.c:2078 -msgid " -L DIRECTORY where to find the input files\n" -msgstr " -L DIRECTORY where to find the input files\n" - -#: initdb.c:2079 -msgid " -n, --noclean do not clean up after errors\n" -msgstr " -n, --noclean 發生錯誤時不清除\n" - -#: initdb.c:2080 -msgid "" -"\n" -"If the data directory is not specified, the environment variable PGDATA\n" -"is used.\n" -msgstr "" -"\n" -"如果沒有指定資料普錄就?使用環境變數PGDATA。\n" - -#: initdb.c:2082 -msgid "" -"\n" -"Report bugs to .\n" -msgstr "" -"\n" -"回報錯誤給。\n" - -#: initdb.c:2175 -msgid "Running in debug mode.\n" -msgstr "以除錯模式執行。\n" - -#: initdb.c:2179 -msgid "Running in noclean mode. Mistakes will not be cleaned up.\n" -msgstr "以noclean模式執行，發生錯誤時不會清理。\n" - -#: initdb.c:2216 initdb.c:2233 initdb.c:2453 -#, c-format -msgid "Try \"%s --help\" for more information.\n" -msgstr "執行\"%s --help\"取得更多資訊。\n" - -#: initdb.c:2231 -#, c-format -msgid "%s: too many command-line arguments (first is \"%s\")\n" -msgstr "%s：命令列參數過多(第一個是 \"%s\")\n" - -#: initdb.c:2239 -#, c-format -msgid "%s: password prompt and password file may not be specified together\n" -msgstr "%s：不能同時使用詢問密碼和指定密碼檔\n" - -#: initdb.c:2245 -msgid "" -"\n" -"WARNING: enabling \"trust\" authentication for local connections\n" -"You can change this by editing pg_hba.conf or using the -A option the\n" -"next time you run initdb.\n" -msgstr "" -"\n" -"警告：對本地端連線使用\"trust\"驗證\n" -"你可以編輯pg_hba.conf改變設定，或在執行initdb時使用 -A 選項。\n" - -#: initdb.c:2269 -#, c-format -msgid "%s: unrecognized authentication method \"%s\"\n" -msgstr "%s：無法辨認的驗證方式\"%s\"\n" - -#: initdb.c:2279 -#, c-format -msgid "" -"%s: must specify a password for the superuser to enable %s authentication\n" -msgstr "%s：你必須提供管理者的密碼才能使用 %s 驗證方式。\n" - -#: initdb.c:2294 -#, c-format -msgid "" -"%s: no data directory specified\n" -"You must identify the directory where the data for this database system\n" -"will reside. Do this with either the invocation option -D or the\n" -"environment variable PGDATA.\n" -msgstr "" -"%s：未指定資料目錄\n" -"你必須指定資料庫系統存放資料的目錄，你可以使用 -D 選項\n" -"或是環境變數PGDATA。\n" - -#: initdb.c:2326 -#, c-format -msgid "" -"The program \"postgres\" is needed by %s but was not found in the\n" -"same directory as \"%s\".\n" -"Check your installation.\n" -msgstr "" -"%s 需要程式 \"postgres\"，但是在與\"%s\"相同的目錄中找不到。\n" -"請檢查你的安裝。\n" - -#: initdb.c:2333 -#, c-format -msgid "" -"The program \"postgres\" was found by \"%s\"\n" -"but was not the same version as %s.\n" -"Check your installation.\n" -msgstr "" -"\"%s\"已找到程式\"postgres\"，但是與 %s 的版本不符。\n" -"請檢查你的安裝。\n" - -#: initdb.c:2352 -#, c-format -msgid "%s: input file location must be an absolute path\n" -msgstr "%s：輸入檔位置必須是絕對路徑\n" - -#: initdb.c:2360 -#, c-format -msgid "%s: could not determine valid short version string\n" -msgstr "%s：無法取得短版本字串\n" - -#: initdb.c:2413 -#, c-format -msgid "" -"The files belonging to this database system will be owned by user \"%s\".\n" -"This user must also own the server process.\n" -"\n" -msgstr "" -"使用者\"%s\"將會成為資料庫系統檔案和伺服器行程的擁有者。\n" -"\n" - -#: initdb.c:2423 -#, c-format -msgid "The database cluster will be initialized with locale %s.\n" -msgstr "資料庫cluster會以locale %s初始化。\n" - -#: initdb.c:2426 -#, c-format -msgid "" -"The database cluster will be initialized with locales\n" -" COLLATE: %s\n" -" CTYPE: %s\n" -" MESSAGES: %s\n" -" MONETARY: %s\n" -" NUMERIC: %s\n" -" TIME: %s\n" -msgstr "" -"資料庫cluster會以下列locale初始化\n" -" COLLATE: %s\n" -" CTYPE: %s\n" -" MESSAGES: %s\n" -" MONETARY: %s\n" -" NUMERIC: %s\n" -" TIME: %s\n" - -#: initdb.c:2451 -#, c-format -msgid "%s: could not find suitable encoding for locale \"%s\"\n" -msgstr "%s: 找不到適合的編碼給locale \"%s\"\n" - -#: initdb.c:2452 -#, c-format -msgid "Rerun %s with the -E option.\n" -msgstr "用 -E 選項重新執行 %s。\n" - -#: initdb.c:2459 -#, c-format -msgid "The default database encoding has accordingly been set to %s.\n" -msgstr "預設資料庫編碼被設為 %s。\n" - -#: initdb.c:2500 -#, c-format -msgid "creating directory %s ... " -msgstr "建立目錄 %s ..." - -#: initdb.c:2514 -#, c-format -msgid "fixing permissions on existing directory %s ... " -msgstr "修正現有目錄 %s 的權限..." - -#: initdb.c:2520 -#, c-format -msgid "%s: could not change permissions of directory \"%s\": %s\n" -msgstr "%s：無法修改目錄\"%s\"的權限：%s\n" - -#: initdb.c:2533 -#, c-format -msgid "" -"%s: directory \"%s\" exists but is not empty\n" -"If you want to create a new database system, either remove or empty\n" -"the directory \"%s\" or run %s\n" -"with an argument other than \"%s\".\n" -msgstr "" -"%s：目錄\"%s\"不是空的\n" -"如果你想建立新的資料庫系統，請將目錄\"%s\"刪除或清空，\n" -"或是在執行 %s 時加上\"%s\"以外的參數。\n" - -#: initdb.c:2542 -#, c-format -msgid "%s: could not access directory \"%s\": %s\n" -msgstr "%s：無法存取目錄\"%s\"：%s\n" - -#: initdb.c:2551 -#, c-format -msgid "creating directory %s/%s ... " -msgstr "建立目錄 %s/%s ..." - -#: initdb.c:2619 -#, c-format -msgid "" -"\n" -"Success. You can now start the database server using:\n" -"\n" -" %s%s%s%spostmaster -D %s%s%s\n" -"or\n" -" %s%s%s%spg_ctl -D %s%s%s -l logfile start\n" -"\n" -msgstr "" -"\n" -"執行成功，現在你可以用下列命令啟動資料庫伺服器：\n" -"\n" -" %s%s%s%spostmaster -D %s%s%s\n" -"或\n" -" %s%s%s%spg_ctl -D %s%s%s -l logfile start\n" -"\n" - -#: ../../port/dirmod.c:75 ../../port/dirmod.c:88 ../../port/dirmod.c:101 -msgid "out of memory\n" -msgstr "記憶體用盡\n" - -#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 -#, c-format -msgid "could not identify current directory: %s" -msgstr "無法識別目前的目錄：%s" - -#: ../../port/exec.c:323 ../../port/exec.c:359 -#, c-format -msgid "could not change directory to \"%s\"" -msgstr "無法切換目錄至\"%s\"" - -#: ../../port/exec.c:338 -#, c-format -msgid "could not read symbolic link \"%s\"" -msgstr "無法讀取符號連結\"%s\"" - -#: ../../port/exec.c:569 -#, c-format -msgid "child process exited with exit code %d" -msgstr "子行程結束，結束代碼 %d" - -#: ../../port/exec.c:572 -#, c-format -msgid "child process was terminated by signal %d" -msgstr "子行程被信號 %d 結束" - -#: ../../port/exec.c:575 -#, c-format -msgid "child process exited with unrecognized status %d" -msgstr "子行程結束，不明結束代碼 %d" - -#~ msgid "%s: failed\n" +# 2004-12-13 Zhenbang Wei +# +msgid "" +msgstr "" +"Project-Id-Version: PostgreSQL 8.0\n" +"POT-Creation-Date: 2004-12-13 01:05+0000\n" +"PO-Revision-Date: 2004-12-13 13:23+0800\n" +"Last-Translator: Zhenbang Wei \n" +"Language-Team: Zhenbang Wei \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: initdb.c:250 initdb.c:264 +#, c-format +msgid "%s: out of memory\n" +msgstr "%s：記憶體用盡\n" + +#: initdb.c:374 initdb.c:1403 +#, c-format +msgid "%s: could not open file \"%s\" for reading: %s\n" +msgstr "%s：無法開啟檔案\"%s\"讀取資料: %s\n" + +#: initdb.c:435 initdb.c:1035 initdb.c:1062 +#, c-format +msgid "%s: could not open file \"%s\" for writing: %s\n" +msgstr "%s：無法開啟檔案\"%s\"寫入資料: %s\n" + +#: initdb.c:443 initdb.c:451 initdb.c:1042 initdb.c:1068 +#, c-format +msgid "%s: could not write file \"%s\": %s\n" +msgstr "%s：無法寫入檔案\"%s\"：%s\n" + +#: initdb.c:470 +#, c-format +msgid "%s: could not execute command \"%s\": %s\n" +msgstr "%s：無法執行命令\"%s\"：%s\n" + +#: initdb.c:593 +#, c-format +msgid "%s: removing data directory \"%s\"\n" +msgstr "%s：刪除資料目錄 \"%s\"\n" + +#: initdb.c:596 +#, c-format +msgid "%s: failed to remove data directory\n" +msgstr "%s：無法刪除資料目錄\n" + +#: initdb.c:602 +#, c-format +msgid "%s: removing contents of data directory \"%s\"\n" +msgstr "%s：刪除資料目錄\"%s\"的內容\n" + +#: initdb.c:605 +#, c-format +msgid "%s: failed to remove contents of data directory\n" +msgstr "%s：無法刪除資料目錄的內容\n" + +#: initdb.c:614 +#, c-format +msgid "%s: data directory \"%s\" not removed at user's request\n" +msgstr "%s：無法依使用者的要求刪除資料目錄 \"%s\"\n" + +#: initdb.c:640 +#, c-format +msgid "" +"%s: cannot be run as root\n" +"Please log in (using, e.g., \"su\") as the (unprivileged) user that will\n" +"own the server process.\n" +msgstr "" +"%s：無法以root身份執行\n" +"請以將會擁有伺服器行程的非特權使用者登入(例如用\"su\")。\n" + +#: initdb.c:689 +#, c-format +msgid "%s: \"%s\" is not a valid server encoding name\n" +msgstr "%s：\"%s\" 不是有效的伺服器編碼名稱\n" + +#: initdb.c:844 +#, c-format +msgid "%s: warning: encoding mismatch\n" +msgstr "%s：警告：編碼不符\n" + +#: initdb.c:846 +#, c-format +msgid "" +"The encoding you selected (%s) and the encoding that the selected\n" +"locale uses (%s) are not known to match. This may lead to\n" +"misbehavior in various character string processing functions. To fix\n" +"this situation, rerun %s and either do not specify an encoding\n" +"explicitly, or choose a matching combination.\n" +msgstr "" +"你選擇的編碼(%s)和locale使用的編碼(%s)不符，這樣可能會讓文\n" +"字處理函式出現異常行為，要修正這個問題，請重新執行 %s 且\n" +"不指定使用的編碼或是指定正確的編碼組合。\n" + +#: initdb.c:976 +#, c-format +msgid "%s: could not create directory \"%s\": %s\n" +msgstr "%s：無法建立目錄\"%s\"：%s\n" + +#: initdb.c:1004 +#, c-format +msgid "" +"%s: file \"%s\" does not exist\n" +"This means you have a corrupted installation or identified\n" +"the wrong directory with the invocation option -L.\n" +msgstr "" +"%s：檔案 \"%s\" 不存在\n" +"這表示你的安裝可能發生錯誤，或是指定了錯誤的\n" +"目錄給選項 -L。\n" + +#: initdb.c:1086 +msgid "selecting default max_connections ... " +msgstr "選擇預設的max_connections ..." + +#: initdb.c:1122 +msgid "selecting default shared_buffers ... " +msgstr "選擇預設的shared_buffers ..." + +#: initdb.c:1155 +msgid "creating configuration files ... " +msgstr "建立設定檔..." + +#: initdb.c:1251 +#, c-format +msgid "creating template1 database in %s/base/1 ... " +msgstr "建立 template1 資料庫於 %s/base/1 ... " + +#: initdb.c:1267 +#, c-format +msgid "" +"%s: input file \"%s\" does not belong to PostgreSQL %s\n" +"Check your installation or specify the correct path using the option -L.\n" +msgstr "" +"%s：輸入檔\"%s\"不屬於 PostgreSQL %s\n" +"請檢查你的安裝或用 -L 選項指定正確的路徑。\n" + +#: initdb.c:1342 +msgid "initializing pg_shadow ... " +msgstr "初始化pg_shadow..." + +#: initdb.c:1378 +msgid "Enter new superuser password: " +msgstr "輸入新的管理者密碼：" + +#: initdb.c:1379 +msgid "Enter it again: " +msgstr "再輸入一次：" + +#: initdb.c:1382 +msgid "Passwords didn't match.\n" +msgstr "密碼不符。\n" + +#: initdb.c:1409 +#, c-format +msgid "%s: could not read password from file \"%s\": %s\n" +msgstr "%s：無法從檔案\"%s\"讀取密碼：%s\n" + +#: initdb.c:1422 +msgid "setting password ... " +msgstr "設定密碼..." + +#: initdb.c:1443 +#, c-format +msgid "%s: The password file was not generated. Please report this problem.\n" +msgstr "%s：無法產生密碼檔，請回報這個錯誤。\n" + +#: initdb.c:1471 +msgid "enabling unlimited row size for system tables ... " +msgstr "啟用系統資料表的無資料筆數限制 ..." + +#: initdb.c:1544 +msgid "initializing pg_depend ... " +msgstr "初始化pg_depend..." + +#: initdb.c:1572 +msgid "creating system views ... " +msgstr "建立系統views..." + +#: initdb.c:1608 +msgid "loading pg_description ... " +msgstr "載入pg_description..." + +#: initdb.c:1647 +msgid "creating conversions ... " +msgstr "建立conversions ... " + +#: initdb.c:1701 +msgid "setting privileges on built-in objects ... " +msgstr "設定內建物件的權限 ... " + +#: initdb.c:1759 +msgid "creating information schema ... " +msgstr "建立information schema ... " + +#: initdb.c:1816 +msgid "vacuuming database template1 ... " +msgstr "重整資料庫template1 ..." + +#: initdb.c:1870 +msgid "copying template1 to template0 ... " +msgstr "複製template1到template0 ..." + +#: initdb.c:1927 +msgid "caught signal\n" +msgstr "捕捉到信號\n" + +#: initdb.c:1933 +#, c-format +msgid "could not write to child process: %s\n" +msgstr "無法寫至子行程：%s\n" + +#: initdb.c:1941 +msgid "ok\n" +msgstr "成功\n" + +#: initdb.c:1989 +#, c-format +msgid "%s: invalid locale name \"%s\"\n" +msgstr "%s：無效的locale名稱\"%s\"\n" + +#: initdb.c:2056 +#, c-format +msgid "" +"%s initializes a PostgreSQL database cluster.\n" +"\n" +msgstr "" +"%s 初始化PostgreSQL資料庫cluster。\n" +"\n" + +#: initdb.c:2057 +msgid "Usage:\n" +msgstr "使用方法：\n" + +#: initdb.c:2058 +#, c-format +msgid " %s [OPTION]... [DATADIR]\n" +msgstr " %s [選項]... [資料目錄]\n" + +#: initdb.c:2059 +msgid "" +"\n" +"Options:\n" +msgstr "" +"\n" +"選項：\n" + +#: initdb.c:2060 +msgid " [-D, --pgdata=]DATADIR location for this database cluster\n" +msgstr " [-D, --pgdata=]DATADIR 資料庫cluster的目錄\n" + +#: initdb.c:2061 +msgid " -E, --encoding=ENCODING set default encoding for new databases\n" +msgstr " -E, --encoding=ENCODING 新資料庫的預設編稼\n" + +#: initdb.c:2062 +msgid "" +" --locale=LOCALE initialize database cluster with given locale\n" +msgstr " --locale=LOCALE 以指定的locale初始化資料庫cluster\n" + +#: initdb.c:2063 +msgid "" +" --lc-collate, --lc-ctype, --lc-messages=LOCALE\n" +" --lc-monetary, --lc-numeric, --lc-time=LOCALE\n" +" initialize database cluster with given locale\n" +" in the respective category (default taken from\n" +" environment)\n" +msgstr "" +" --lc-collate, --lc-ctype, --lc-messages=LOCALE\n" +" --lc-monetary, --lc-numeric, --lc-time=LOCALE\n" +" 指定不同種類的locale以初始化資料庫cluster\n" +" (預設從環境變數取得)\n" + +#: initdb.c:2068 +msgid " --no-locale equivalent to --locale=C\n" +msgstr " --no-locale 功能同 --locale=C\n" + +#: initdb.c:2069 +msgid "" +" -A, --auth=METHOD default authentication method for local " +"connections\n" +msgstr " -A, --auth=METHOD 本地端預設的連線驗證方式\n" + +#: initdb.c:2070 +msgid " -U, --username=NAME database superuser name\n" +msgstr " -U, --username=NAME 資料庫管理者名稱\n" + +#: initdb.c:2071 +msgid "" +" -W, --pwprompt prompt for a password for the new superuser\n" +msgstr " -W, --pwprompt 詢問新管理者的密碼\n" + +#: initdb.c:2072 +msgid "" +" --pwfile=FILE read password for the new superuser from file\n" +msgstr " --pwfile=FILE 從檔案讀取新管理者的密碼\n" + +#: initdb.c:2073 +msgid " -?, --help show this help, then exit\n" +msgstr " -?, --help 顯示這份說明然後結束\n" + +#: initdb.c:2074 +msgid " -V, --version output version information, then exit\n" +msgstr " -V, --version 顯示版本資訊然後結束\n" + +#: initdb.c:2075 +msgid "" +"\n" +"Less commonly used options:\n" +msgstr "" +"\n" +"非常用選項:\n" + +#: initdb.c:2076 +msgid " -d, --debug generate lots of debugging output\n" +msgstr " -d, --debug 顯示除錯訊息\n" + +#: initdb.c:2077 +msgid " -s, --show show internal settings\n" +msgstr " -s, --show 顯示內部設定\n" + +#: initdb.c:2078 +msgid " -L DIRECTORY where to find the input files\n" +msgstr " -L DIRECTORY where to find the input files\n" + +#: initdb.c:2079 +msgid " -n, --noclean do not clean up after errors\n" +msgstr " -n, --noclean 發生錯誤時不清除\n" + +#: initdb.c:2080 +msgid "" +"\n" +"If the data directory is not specified, the environment variable PGDATA\n" +"is used.\n" +msgstr "" +"\n" +"如果沒有指定資料普錄就?使用環境變數PGDATA。\n" + +#: initdb.c:2082 +msgid "" +"\n" +"Report bugs to .\n" +msgstr "" +"\n" +"回報錯誤給。\n" + +#: initdb.c:2175 +msgid "Running in debug mode.\n" +msgstr "以除錯模式執行。\n" + +#: initdb.c:2179 +msgid "Running in noclean mode. Mistakes will not be cleaned up.\n" +msgstr "以noclean模式執行，發生錯誤時不會清理。\n" + +#: initdb.c:2216 initdb.c:2233 initdb.c:2453 +#, c-format +msgid "Try \"%s --help\" for more information.\n" +msgstr "執行\"%s --help\"取得更多資訊。\n" + +#: initdb.c:2231 +#, c-format +msgid "%s: too many command-line arguments (first is \"%s\")\n" +msgstr "%s：命令列參數過多(第一個是 \"%s\")\n" + +#: initdb.c:2239 +#, c-format +msgid "%s: password prompt and password file may not be specified together\n" +msgstr "%s：不能同時使用詢問密碼和指定密碼檔\n" + +#: initdb.c:2245 +msgid "" +"\n" +"WARNING: enabling \"trust\" authentication for local connections\n" +"You can change this by editing pg_hba.conf or using the -A option the\n" +"next time you run initdb.\n" +msgstr "" +"\n" +"警告：對本地端連線使用\"trust\"驗證\n" +"你可以編輯pg_hba.conf改變設定，或在執行initdb時使用 -A 選項。\n" + +#: initdb.c:2269 +#, c-format +msgid "%s: unrecognized authentication method \"%s\"\n" +msgstr "%s：無法辨認的驗證方式\"%s\"\n" + +#: initdb.c:2279 +#, c-format +msgid "" +"%s: must specify a password for the superuser to enable %s authentication\n" +msgstr "%s：你必須提供管理者的密碼才能使用 %s 驗證方式。\n" + +#: initdb.c:2294 +#, c-format +msgid "" +"%s: no data directory specified\n" +"You must identify the directory where the data for this database system\n" +"will reside. Do this with either the invocation option -D or the\n" +"environment variable PGDATA.\n" +msgstr "" +"%s：未指定資料目錄\n" +"你必須指定資料庫系統存放資料的目錄，你可以使用 -D 選項\n" +"或是環境變數PGDATA。\n" + +#: initdb.c:2326 +#, c-format +msgid "" +"The program \"postgres\" is needed by %s but was not found in the\n" +"same directory as \"%s\".\n" +"Check your installation.\n" +msgstr "" +"%s 需要程式 \"postgres\"，但是在與\"%s\"相同的目錄中找不到。\n" +"請檢查你的安裝。\n" + +#: initdb.c:2333 +#, c-format +msgid "" +"The program \"postgres\" was found by \"%s\"\n" +"but was not the same version as %s.\n" +"Check your installation.\n" +msgstr "" +"\"%s\"已找到程式\"postgres\"，但是與 %s 的版本不符。\n" +"請檢查你的安裝。\n" + +#: initdb.c:2352 +#, c-format +msgid "%s: input file location must be an absolute path\n" +msgstr "%s：輸入檔位置必須是絕對路徑\n" + +#: initdb.c:2360 +#, c-format +msgid "%s: could not determine valid short version string\n" +msgstr "%s：無法取得短版本字串\n" + +#: initdb.c:2413 +#, c-format +msgid "" +"The files belonging to this database system will be owned by user \"%s\".\n" +"This user must also own the server process.\n" +"\n" +msgstr "" +"使用者\"%s\"將會成為資料庫系統檔案和伺服器行程的擁有者。\n" +"\n" + +#: initdb.c:2423 +#, c-format +msgid "The database cluster will be initialized with locale %s.\n" +msgstr "資料庫cluster會以locale %s初始化。\n" + +#: initdb.c:2426 +#, c-format +msgid "" +"The database cluster will be initialized with locales\n" +" COLLATE: %s\n" +" CTYPE: %s\n" +" MESSAGES: %s\n" +" MONETARY: %s\n" +" NUMERIC: %s\n" +" TIME: %s\n" +msgstr "" +"資料庫cluster會以下列locale初始化\n" +" COLLATE: %s\n" +" CTYPE: %s\n" +" MESSAGES: %s\n" +" MONETARY: %s\n" +" NUMERIC: %s\n" +" TIME: %s\n" + +#: initdb.c:2451 +#, c-format +msgid "%s: could not find suitable encoding for locale \"%s\"\n" +msgstr "%s: 找不到適合的編碼給locale \"%s\"\n" + +#: initdb.c:2452 +#, c-format +msgid "Rerun %s with the -E option.\n" +msgstr "用 -E 選項重新執行 %s。\n" + +#: initdb.c:2459 +#, c-format +msgid "The default database encoding has accordingly been set to %s.\n" +msgstr "預設資料庫編碼被設為 %s。\n" + +#: initdb.c:2500 +#, c-format +msgid "creating directory %s ... " +msgstr "建立目錄 %s ..." + +#: initdb.c:2514 +#, c-format +msgid "fixing permissions on existing directory %s ... " +msgstr "修正現有目錄 %s 的權限..." + +#: initdb.c:2520 +#, c-format +msgid "%s: could not change permissions of directory \"%s\": %s\n" +msgstr "%s：無法修改目錄\"%s\"的權限：%s\n" + +#: initdb.c:2533 +#, c-format +msgid "" +"%s: directory \"%s\" exists but is not empty\n" +"If you want to create a new database system, either remove or empty\n" +"the directory \"%s\" or run %s\n" +"with an argument other than \"%s\".\n" +msgstr "" +"%s：目錄\"%s\"不是空的\n" +"如果你想建立新的資料庫系統，請將目錄\"%s\"刪除或清空，\n" +"或是在執行 %s 時加上\"%s\"以外的參數。\n" + +#: initdb.c:2542 +#, c-format +msgid "%s: could not access directory \"%s\": %s\n" +msgstr "%s：無法存取目錄\"%s\"：%s\n" + +#: initdb.c:2551 +#, c-format +msgid "creating directory %s/%s ... " +msgstr "建立目錄 %s/%s ..." + +#: initdb.c:2619 +#, c-format +msgid "" +"\n" +"Success. You can now start the database server using:\n" +"\n" +" %s%s%s%spostmaster -D %s%s%s\n" +"or\n" +" %s%s%s%spg_ctl -D %s%s%s -l logfile start\n" +"\n" +msgstr "" +"\n" +"執行成功，現在你可以用下列命令啟動資料庫伺服器：\n" +"\n" +" %s%s%s%spostmaster -D %s%s%s\n" +"或\n" +" %s%s%s%spg_ctl -D %s%s%s -l logfile start\n" +"\n" + +#: ../../port/dirmod.c:75 ../../port/dirmod.c:88 ../../port/dirmod.c:101 +msgid "out of memory\n" +msgstr "記憶體用盡\n" + +#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 +#, c-format +msgid "could not identify current directory: %s" +msgstr "無法識別目前的目錄：%s" + +#: ../../port/exec.c:323 ../../port/exec.c:359 +#, c-format +msgid "could not change directory to \"%s\"" +msgstr "無法切換目錄至\"%s\"" + +#: ../../port/exec.c:338 +#, c-format +msgid "could not read symbolic link \"%s\"" +msgstr "無法讀取符號連結\"%s\"" + +#: ../../port/exec.c:569 +#, c-format +msgid "child process exited with exit code %d" +msgstr "子行程結束，結束代碼 %d" + +#: ../../port/exec.c:572 +#, c-format +msgid "child process was terminated by signal %d" +msgstr "子行程被信號 %d 結束" + +#: ../../port/exec.c:575 +#, c-format +msgid "child process exited with unrecognized status %d" +msgstr "子行程結束，不明結束代碼 %d" + +#~ msgid "%s: failed\n" #~ msgstr "%s：失敗\n" \ No newline at end of file diff --git a/src/bin/pg_config/po/zh_TW.po b/src/bin/pg_config/po/zh_TW.po index a7e36301c9..c6b53b7251 100644 --- a/src/bin/pg_config/po/zh_TW.po +++ b/src/bin/pg_config/po/zh_TW.po @@ -1,145 +1,145 @@ -# 2004-12-13 Zhenbang Wei -# -msgid "" -msgstr "" -"Project-Id-Version: PostgreSQL 8.0\n" -"POT-Creation-Date: 2004-12-13 01:05+0000\n" -"PO-Revision-Date: 2004-12-13 14:29+0800\n" -"Last-Translator: Zhenbang Wei \n" -"Language-Team: Zhenbang Wei \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#: pg_config.c:36 -#, c-format -msgid "" -"\n" -"%s provides information about the installed version of PostgreSQL.\n" -"\n" -msgstr "" -"\n" -"%s 顯示已安裝的PostgreSQL資訊。\n" -"\n" - -#: pg_config.c:37 -msgid "Usage:\n" -msgstr "使用方法：\n" - -#: pg_config.c:38 -#, c-format -msgid "" -" %s OPTION...\n" -"\n" -msgstr "" -" %s 選項...\n" -"\n" - -#: pg_config.c:39 -msgid "Options:\n" -msgstr "選項：\n" - -#: pg_config.c:40 -msgid " --bindir show location of user executables\n" -msgstr " --bindir 顯示執行檔位置\n" - -#: pg_config.c:41 -msgid "" -" --includedir show location of C header files of the client\n" -" interfaces\n" -msgstr " --includedir 顯使用戶端介面C標頭檔位置\n" - -#: pg_config.c:43 -msgid "" -" --includedir-server show location of C header files for the server\n" -msgstr " --includedir-server 顯示伺服器C標頭檔位置\n" - -#: pg_config.c:44 -msgid " --libdir show location of object code libraries\n" -msgstr " --libdir 顯示程式庫位置\n" - -#: pg_config.c:45 -msgid " --pkglibdir show location of dynamically loadable modules\n" -msgstr " --pkglibdir 顯示可動態載入模組位置\n" - -#: pg_config.c:46 -msgid " --pgxs show location of extension makefile\n" -msgstr " --pgxs 顯示外掛程式makefile位置\n" - -#: pg_config.c:47 -msgid "" -" --configure show options given to \"configure\" script when\n" -" PostgreSQL was built\n" -msgstr "" -" --configure 顯示編譯PostgreSQL時'configure'命令搞\n" -" 所使用的參數\n" - -#: pg_config.c:49 -msgid " --version show the PostgreSQL version, then exit\n" -msgstr " --version 顯示PostgreSQL版?然後束\n" - -#: pg_config.c:50 -msgid "" -" --help show this help, then exit\n" -"\n" -msgstr "" -" --help 顯示這份說明然後結束\n" -"\n" - -#: pg_config.c:51 -msgid "Report bugs to .\n" -msgstr "回報錯誤至。\n" - -#: pg_config.c:57 -#, c-format -msgid "" -"\n" -"Try \"%s --help\" for more information\n" -msgstr "" -"\n" -"執行\"%s --help\"取得更多資訊\n" - -#: pg_config.c:75 -#, c-format -msgid "%s: argument required\n" -msgstr "%s：不能省略參數\n" - -#: pg_config.c:104 -#, c-format -msgid "%s: invalid argument: %s\n" -msgstr "%s：無效的參數：%s\n" - -#: pg_config.c:113 -#, c-format -msgid "%s: could not find own executable\n" -msgstr "%s：找不到執行檔\n" - -#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 -#, c-format -msgid "could not identify current directory: %s" -msgstr "無法識別目前的目錄：%s" - -#: ../../port/exec.c:323 ../../port/exec.c:359 -#, c-format -msgid "could not change directory to \"%s\"" -msgstr "無法切換目錄至\"%s\"" - -#: ../../port/exec.c:338 -#, c-format -msgid "could not read symbolic link \"%s\"" -msgstr "無法讀取符號連結\"%s\"" - -#: ../../port/exec.c:569 -#, c-format -msgid "child process exited with exit code %d" -msgstr "子行程結束，結束代碼 %d" - -#: ../../port/exec.c:572 -#, c-format -msgid "child process was terminated by signal %d" -msgstr "子行程被信號 %d 結束" - -#: ../../port/exec.c:575 -#, c-format -msgid "child process exited with unrecognized status %d" +# 2004-12-13 Zhenbang Wei +# +msgid "" +msgstr "" +"Project-Id-Version: PostgreSQL 8.0\n" +"POT-Creation-Date: 2004-12-13 01:05+0000\n" +"PO-Revision-Date: 2004-12-13 14:29+0800\n" +"Last-Translator: Zhenbang Wei \n" +"Language-Team: Zhenbang Wei \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: pg_config.c:36 +#, c-format +msgid "" +"\n" +"%s provides information about the installed version of PostgreSQL.\n" +"\n" +msgstr "" +"\n" +"%s 顯示已安裝的PostgreSQL資訊。\n" +"\n" + +#: pg_config.c:37 +msgid "Usage:\n" +msgstr "使用方法：\n" + +#: pg_config.c:38 +#, c-format +msgid "" +" %s OPTION...\n" +"\n" +msgstr "" +" %s 選項...\n" +"\n" + +#: pg_config.c:39 +msgid "Options:\n" +msgstr "選項：\n" + +#: pg_config.c:40 +msgid " --bindir show location of user executables\n" +msgstr " --bindir 顯示執行檔位置\n" + +#: pg_config.c:41 +msgid "" +" --includedir show location of C header files of the client\n" +" interfaces\n" +msgstr " --includedir 顯使用戶端介面C標頭檔位置\n" + +#: pg_config.c:43 +msgid "" +" --includedir-server show location of C header files for the server\n" +msgstr " --includedir-server 顯示伺服器C標頭檔位置\n" + +#: pg_config.c:44 +msgid " --libdir show location of object code libraries\n" +msgstr " --libdir 顯示程式庫位置\n" + +#: pg_config.c:45 +msgid " --pkglibdir show location of dynamically loadable modules\n" +msgstr " --pkglibdir 顯示可動態載入模組位置\n" + +#: pg_config.c:46 +msgid " --pgxs show location of extension makefile\n" +msgstr " --pgxs 顯示外掛程式makefile位置\n" + +#: pg_config.c:47 +msgid "" +" --configure show options given to \"configure\" script when\n" +" PostgreSQL was built\n" +msgstr "" +" --configure 顯示編譯PostgreSQL時'configure'命令搞\n" +" 所使用的參數\n" + +#: pg_config.c:49 +msgid " --version show the PostgreSQL version, then exit\n" +msgstr " --version 顯示PostgreSQL版?然後束\n" + +#: pg_config.c:50 +msgid "" +" --help show this help, then exit\n" +"\n" +msgstr "" +" --help 顯示這份說明然後結束\n" +"\n" + +#: pg_config.c:51 +msgid "Report bugs to .\n" +msgstr "回報錯誤至。\n" + +#: pg_config.c:57 +#, c-format +msgid "" +"\n" +"Try \"%s --help\" for more information\n" +msgstr "" +"\n" +"執行\"%s --help\"取得更多資訊\n" + +#: pg_config.c:75 +#, c-format +msgid "%s: argument required\n" +msgstr "%s：不能省略參數\n" + +#: pg_config.c:104 +#, c-format +msgid "%s: invalid argument: %s\n" +msgstr "%s：無效的參數：%s\n" + +#: pg_config.c:113 +#, c-format +msgid "%s: could not find own executable\n" +msgstr "%s：找不到執行檔\n" + +#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 +#, c-format +msgid "could not identify current directory: %s" +msgstr "無法識別目前的目錄：%s" + +#: ../../port/exec.c:323 ../../port/exec.c:359 +#, c-format +msgid "could not change directory to \"%s\"" +msgstr "無法切換目錄至\"%s\"" + +#: ../../port/exec.c:338 +#, c-format +msgid "could not read symbolic link \"%s\"" +msgstr "無法讀取符號連結\"%s\"" + +#: ../../port/exec.c:569 +#, c-format +msgid "child process exited with exit code %d" +msgstr "子行程結束，結束代碼 %d" + +#: ../../port/exec.c:572 +#, c-format +msgid "child process was terminated by signal %d" +msgstr "子行程被信號 %d 結束" + +#: ../../port/exec.c:575 +#, c-format +msgid "child process exited with unrecognized status %d" msgstr "子行程結束，不明狀態代碼 %d" \ No newline at end of file diff --git a/src/bin/pg_controldata/po/zh_CN.po b/src/bin/pg_controldata/po/zh_CN.po index d96df1c8b5..7e4601024a 100644 --- a/src/bin/pg_controldata/po/zh_CN.po +++ b/src/bin/pg_controldata/po/zh_CN.po @@ -1,6 +1,6 @@ -# simplified Chinese translation file for pg_controldata and friends -# Bao Wei , 2002. -# +# simplified Chinese translation file for pg_controldata and friends +# Bao Wei , 2002. +# msgid "" msgstr "" "Project-Id-Version: PostgreSQL 8.0\n" diff --git a/src/bin/pg_ctl/po/zh_TW.po b/src/bin/pg_ctl/po/zh_TW.po index edf47a2499..e6e9eb6466 100644 --- a/src/bin/pg_ctl/po/zh_TW.po +++ b/src/bin/pg_ctl/po/zh_TW.po @@ -1,504 +1,504 @@ -# 2004-12-13 Zhenbang Wei -# -msgid "" -msgstr "" -"Project-Id-Version: PostgreSQL 8.0\n" -"POT-Creation-Date: 2004-12-13 01:06+0000\n" -"PO-Revision-Date: 2004-12-13 14:30+0800\n" -"Last-Translator: Zhenbang Wei \n" -"Language-Team: Zhenbang Wei \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=utf-8\n" -"Content-Transfer-Encoding: 8bit\n" - -#: pg_ctl.c:201 pg_ctl.c:216 pg_ctl.c:1342 -#, c-format -msgid "%s: out of memory\n" -msgstr "%s：記憶體用盡\n" - -#: pg_ctl.c:250 -#, c-format -msgid "%s: could not open PID file \"%s\": %s" -msgstr "%s：無法開啟PID檔\"%s\"：%s" - -#: pg_ctl.c:469 -#, c-format -msgid "" -"%s: another postmaster may be running; trying to start postmaster anyway\n" -msgstr "%s：可能有另一個postmaster正在執行，嘗試強制啟動postmaster。\n" - -#: pg_ctl.c:487 -#, c-format -msgid "%s: could not read file \"%s\"\n" -msgstr "%s：無法讀取檔案\"%s\"\n" - -#: pg_ctl.c:493 -#, c-format -msgid "%s: option file \"%s\" must have exactly one line\n" -msgstr "%s：選項檔\"%s\"只能有一行內容\n" - -#: pg_ctl.c:544 -#, c-format -msgid "" -"The program \"postmaster\" is needed by %s but was not found in the\n" -"same directory as \"%s\".\n" -"Check your installation.\n" -msgstr "" -"%s 需要\"postmaster\"程式，但是在與\"%s\"相同的目錄中找不到。\n" -"檢查你的安裝。\n" - -#: pg_ctl.c:550 -#, c-format -msgid "" -"The program \"postmaster\" was found by \"%s\"\n" -"but was not the same version as %s.\n" -"Check your installation.\n" -msgstr "" -"\"%s\"已找到程式\"postmaster\"，但是與 %s 版本不符。\n" -"請檢查你的安裝。\n" - -#: pg_ctl.c:562 -#, c-format -msgid "%s: could not start postmaster: exit code was %d\n" -msgstr "%s：無法啟動postmaster：結束碼是 %d\n" - -#: pg_ctl.c:573 -#, c-format -msgid "" -"%s: could not start postmaster\n" -"Examine the log output.\n" -msgstr "" -"%s：無法啟動postmaster\n" -"請檢查log輸出\n" - -#: pg_ctl.c:582 -msgid "waiting for postmaster to start..." -msgstr "等待postmaster啟動..." - -#: pg_ctl.c:585 -msgid "could not start postmaster\n" -msgstr "無法啟動postmaster\n" - -#: pg_ctl.c:588 pg_ctl.c:654 pg_ctl.c:721 -msgid " done\n" -msgstr " 完成\n" - -#: pg_ctl.c:589 -msgid "postmaster started\n" -msgstr "postmaster已經啟動\n" - -#: pg_ctl.c:593 -msgid "postmaster starting\n" -msgstr "postmaster正在啟動\n" - -#: pg_ctl.c:607 pg_ctl.c:675 pg_ctl.c:735 -#, c-format -msgid "%s: PID file \"%s\" does not exist\n" -msgstr "%s：PID檔\"%s\"不存在\n" - -#: pg_ctl.c:608 pg_ctl.c:676 pg_ctl.c:736 -msgid "Is postmaster running?\n" -msgstr "postmaster是否正在執行？\n" - -#: pg_ctl.c:614 -#, c-format -msgid "%s: cannot stop postmaster; postgres is running (PID: %ld)\n" -msgstr "%s：無法停止postmaster，postgres正在執行(PID：%ld)\n" - -#: pg_ctl.c:622 pg_ctl.c:693 -#, c-format -msgid "%s: could not send stop signal (PID: %ld): %s\n" -msgstr "%s：無法傳送stop信號(PID：%ld)：%s\n" - -#: pg_ctl.c:629 -msgid "postmaster shutting down\n" -msgstr "postmaster正在關閉\n" - -#: pg_ctl.c:634 pg_ctl.c:698 -msgid "waiting for postmaster to shut down..." -msgstr "等待postmaster關閉..." - -#: pg_ctl.c:649 pg_ctl.c:715 -msgid " failed\n" -msgstr " 失敗\n" - -#: pg_ctl.c:651 pg_ctl.c:717 -#, c-format -msgid "%s: postmaster does not shut down\n" -msgstr "%s：postmaster無法關閉\n" - -#: pg_ctl.c:656 pg_ctl.c:722 -msgid "postmaster stopped\n" -msgstr "postmaster停止執行\n" - -#: pg_ctl.c:677 -msgid "starting postmaster anyway\n" -msgstr "強制啟動postmaster\n" - -#: pg_ctl.c:684 -#, c-format -msgid "%s: cannot restart postmaster; postgres is running (PID: %ld)\n" -msgstr "%s：無法重新啟動postmaster，postgres正在執行(PID：%ld)\n" - -#: pg_ctl.c:687 pg_ctl.c:745 -msgid "Please terminate postgres and try again.\n" -msgstr "請結束postgres然後再試一次。\n" - -#: pg_ctl.c:742 -#, c-format -msgid "%s: cannot reload postmaster; postgres is running (PID: %ld)\n" -msgstr "%s：無法重新載入postmaster， postgres正在執行(PID：%ld)\n" - -#: pg_ctl.c:751 -#, c-format -msgid "%s: could not send reload signal (PID: %ld): %s\n" -msgstr "%s：無法傳送reload信號(PID：%ld)：%s\n" - -#: pg_ctl.c:756 -msgid "postmaster signaled\n" -msgstr "已通知postmaster\n" - -#: pg_ctl.c:771 -#, c-format -msgid "%s: neither postmaster nor postgres running\n" -msgstr "%s：postmaster或postgres尚未執行\n" - -#: pg_ctl.c:777 -#, c-format -msgid "%s: a standalone backend \"postgres\" is running (PID: %ld)\n" -msgstr "%s：一個獨立後端\"postgres\"正在執行(PID：%ld)\n" - -#: pg_ctl.c:784 -#, c-format -msgid "%s: postmaster is running (PID: %ld)\n" -msgstr "%s：postmaster正在執行(PID：%ld)\n" - -#: pg_ctl.c:800 -#, c-format -msgid "%s: could not send signal %d (PID: %ld): %s\n" -msgstr "%s：無法傳送信號 %d(PID：%ld)：%s\n" - -#: pg_ctl.c:833 -#, c-format -msgid "%s: could not find own program executable\n" -msgstr "%s：找不到程式執行檔\n" - -#: pg_ctl.c:842 -#, c-format -msgid "%s: could not find postmaster program executable\n" -msgstr "%s：找不到postmaster執行檔\n" - -#: pg_ctl.c:896 pg_ctl.c:928 -#, c-format -msgid "%s: could not open service manager\n" -msgstr "%s：無法開啟服務管理員\n" - -#: pg_ctl.c:902 -#, c-format -msgid "%s: service \"%s\" already registered\n" -msgstr "%s：服務\"%s\"已經被註冊\n" - -#: pg_ctl.c:913 -#, c-format -msgid "%s: could not register service \"%s\": error code %d\n" -msgstr "%s：無法註冊服務\"%s\"：錯誤代碼%d\n" - -#: pg_ctl.c:934 -#, c-format -msgid "%s: service \"%s\" not registered\n" -msgstr "%s：服務\"%s\"未被註冊\n" - -#: pg_ctl.c:941 -#, c-format -msgid "%s: could not open service \"%s\": error code %d\n" -msgstr "%s：無法開啟服務\"%s\"：錯誤代碼%d\n" - -#: pg_ctl.c:948 -#, c-format -msgid "%s: could not unregister service \"%s\": error code %d\n" -msgstr "%s：無法移除服務\"%s\"：錯誤代碼%d\n" - -#: pg_ctl.c:1085 -#, c-format -msgid "Try \"%s --help\" for more information.\n" -msgstr "執行\"%s --help\"以顯示更多資訊。\n" - -#: pg_ctl.c:1093 -#, c-format -msgid "" -"%s is a utility to start, stop, restart, reload configuration files,\n" -"report the status of a PostgreSQL server, or signal a PostgreSQL process.\n" -"\n" -msgstr "" -"%s 可以用來啟動、停止、重新啟動、重新載入設定檔、\n" -"報告PostgreSQL伺服器狀態，或送信號給PostgreSQL行程。\n" -"\n" - -#: pg_ctl.c:1095 -msgid "Usage:\n" -msgstr "使用方法：\n" - -#: pg_ctl.c:1096 -#, c-format -msgid " %s start [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]\n" -msgstr " %s start [-w] [-D 資料目錄] [-s] [-l 檔名] [-o \"選項\"]\n" - -#: pg_ctl.c:1097 -#, c-format -msgid " %s stop [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]\n" -msgstr " %s stop [-W] [-D 資料目錄] [-s] [-m 關閉模式]\n" - -#: pg_ctl.c:1098 -#, c-format -msgid "" -" %s restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o \"OPTIONS\"]\n" -msgstr " %s restart [-w] [-D 資料目錄] [-s] [-m 關閉模式] [-o \"選項\"]\n" - -#: pg_ctl.c:1099 -#, c-format -msgid " %s reload [-D DATADIR] [-s]\n" -msgstr " %s reload [-D 資料目錄] [-s]\n" - -#: pg_ctl.c:1100 -#, c-format -msgid " %s status [-D DATADIR]\n" -msgstr " %s status [-D 資料目錄]\n" - -#: pg_ctl.c:1101 -#, c-format -msgid " %s kill SIGNALNAME PID\n" -msgstr " %s kill 信號名稱 PID\n" - -#: pg_ctl.c:1103 -#, c-format -msgid "" -" %s register [-N SERVICENAME] [-U USERNAME] [-P PASSWORD] [-D DATADIR]\n" -" [-w] [-o \"OPTIONS\"]\n" -msgstr "" -" %s register [-N 服務名稱] [-U 使用者] [-P 密碼] [-D 資料目錄] [-w]\n" -" [-o \"選項\"]\n" - -#: pg_ctl.c:1105 -#, c-format -msgid " %s unregister [-N SERVICENAME]\n" -msgstr " %s unregister [-N 服務名稱]\n" - -#: pg_ctl.c:1108 -msgid "" -"\n" -"Common options:\n" -msgstr "" -"\n" -"一般選項：\n" - -#: pg_ctl.c:1109 -msgid " -D, --pgdata DATADIR location of the database storage area\n" -msgstr " -D, --pgdata 資料目錄 存放資料庫的目錄\n" - -#: pg_ctl.c:1110 -msgid " -s, --silent only print errors, no informational messages\n" -msgstr " -s, --silent 只顯示錯誤，不顯示其它訊息\n" - -#: pg_ctl.c:1111 -msgid " -w wait until operation completes\n" -msgstr " -w 等待操作完成\n" - -#: pg_ctl.c:1112 -msgid " -W do not wait until operation completes\n" -msgstr " -W 不等待操作完成\n" - -#: pg_ctl.c:1113 -msgid " --help show this help, then exit\n" -msgstr " --help 顯示這份說明然後結束\n" - -#: pg_ctl.c:1114 -msgid " --version output version information, then exit\n" -msgstr " --version 顯示版本資訊然後結束\n" - -#: pg_ctl.c:1115 -msgid "" -"(The default is to wait for shutdown, but not for start or restart.)\n" -"\n" -msgstr "" -"(預設是關閉時而非啟動或重新啟動時等待。)\n" -"\n" - -#: pg_ctl.c:1116 -msgid "If the -D option is omitted, the environment variable PGDATA is used.\n" -msgstr "如果沒有使用選項 -D，改用環境變數PGDATA。\n" - -#: pg_ctl.c:1118 -msgid "" -"\n" -"Options for start or restart:\n" -msgstr "" -"\n" -"啟動或重新啟動可用選項：\n" - -#: pg_ctl.c:1119 -msgid " -l, --log FILENAME write (or append) server log to FILENAME\n" -msgstr " -l, --log 檔名 將伺服器log寫入(或附加至)檔案。\n" - -#: pg_ctl.c:1120 -msgid "" -" -o OPTIONS command line options to pass to the postmaster\n" -" (PostgreSQL server executable)\n" -msgstr "" -" -o 選項 傳給postmaster(PostgreSQL伺服器執行檔)的\n" -" 命令列選項\n" - -#: pg_ctl.c:1122 -msgid " -p PATH-TO-POSTMASTER normally not necessary\n" -msgstr " -p postmaster的路徑 通常不需要\n" - -#: pg_ctl.c:1124 -msgid "" -"\n" -"Options for stop or restart:\n" -msgstr "" -"\n" -"停止或重新啟動可用選項：\n" - -#: pg_ctl.c:1125 -msgid " -m SHUTDOWN-MODE may be \"smart\", \"fast\", or \"immediate\"\n" -msgstr " -m 關閉模式 可以是\"smart\"、\"fast\"或\"immediate\"\n" - -#: pg_ctl.c:1127 -msgid "" -"\n" -"Shutdown modes are:\n" -msgstr "" -"\n" -"可用關閉模式：\n" - -#: pg_ctl.c:1128 -msgid " smart quit after all clients have disconnected\n" -msgstr " smart 在所有用戶端斷線後關閉\n" - -#: pg_ctl.c:1129 -msgid " fast quit directly, with proper shutdown\n" -msgstr " fast 直接正常關閉\n" - -#: pg_ctl.c:1130 -msgid "" -" immediate quit without complete shutdown; will lead to recovery on " -"restart\n" -msgstr " immediate 立即結束，會導致下次啟動時需要復原程序\n" - -#: pg_ctl.c:1132 -msgid "" -"\n" -"Allowed signal names for kill:\n" -msgstr "" -"\n" -"kill可以使用的信號名稱：\n" - -#: pg_ctl.c:1136 -msgid "" -"\n" -"Options for register and unregister:\n" -msgstr "" -"\n" -"註冊或移除註冊可用選項：\n" - -#: pg_ctl.c:1137 -msgid "" -" -N SERVICENAME service name with which to register PostgreSQL server\n" -msgstr " -N 服務名稱 用來註冊PostgreSQL伺服器的服務名稱\n" - -#: pg_ctl.c:1138 -msgid " -P PASSWORD password of account to register PostgreSQL server\n" -msgstr " -P 密碼 用來註冊PostgreSQL伺服器的密碼\n" - -#: pg_ctl.c:1139 -msgid " -U USERNAME user name of account to register PostgreSQL server\n" -msgstr " -U 使用者 用來註冊PostgreSQL伺服器的帳號\n" - -#: pg_ctl.c:1142 -msgid "" -"\n" -"Report bugs to .\n" -msgstr "" -"\n" -"回報錯誤至。\n" - -#: pg_ctl.c:1167 -#, c-format -msgid "%s: unrecognized shutdown mode \"%s\"\n" -msgstr "%s：無效的關閉模式\"%s\"\n" - -#: pg_ctl.c:1200 -#, c-format -msgid "%s: unrecognized signal name \"%s\"\n" -msgstr "%s：無效的信號名稱\"%s\"\n" - -#: pg_ctl.c:1265 -#, c-format -msgid "" -"%s: cannot be run as root\n" -"Please log in (using, e.g., \"su\") as the (unprivileged) user that will\n" -"own the server process.\n" -msgstr "" -"%s：無法以root身份執行\n" -"請以將會擁有伺服務行程的(非特權)使用者登入(例如用\"su\"命令)。\n" - -#: pg_ctl.c:1358 -#, c-format -msgid "%s: invalid option %s\n" -msgstr "%s：無效的選項 %s\n" - -#: pg_ctl.c:1369 -#, c-format -msgid "%s: too many command-line arguments (first is \"%s\")\n" -msgstr "%s：命令列參數過多(第一個是\"%s\")\n" - -#: pg_ctl.c:1388 -#, c-format -msgid "%s: missing arguments for kill mode\n" -msgstr "%s：kill模式未指定參數\n" - -#: pg_ctl.c:1406 -#, c-format -msgid "%s: unrecognized operation mode \"%s\"\n" -msgstr "%s：無效的操作模式\"%s\"\n" - -#: pg_ctl.c:1416 -#, c-format -msgid "%s: no operation specified\n" -msgstr "%s：未指定操作方式\n" - -#: pg_ctl.c:1432 -#, c-format -msgid "" -"%s: no database directory specified and environment variable PGDATA unset\n" -msgstr "%s：未指定資料目錄和設定環境變數PGDATA\n" - -#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 -#, c-format -msgid "could not identify current directory: %s" -msgstr "無法識別目前的目錄：%s" - -#: ../../port/exec.c:323 ../../port/exec.c:359 -#, c-format -msgid "could not change directory to \"%s\"" -msgstr "無法切換目錄至\"%s\"" - -#: ../../port/exec.c:338 -#, c-format -msgid "could not read symbolic link \"%s\"" -msgstr "無法讀取符號連結\"%s\"" - -#: ../../port/exec.c:569 -#, c-format -msgid "child process exited with exit code %d" -msgstr "子行程結束，結束代碼 %d" - -#: ../../port/exec.c:572 -#, c-format -msgid "child process was terminated by signal %d" -msgstr "子行程被信號 %d 結束" - -#: ../../port/exec.c:575 -#, c-format -msgid "child process exited with unrecognized status %d" +# 2004-12-13 Zhenbang Wei +# +msgid "" +msgstr "" +"Project-Id-Version: PostgreSQL 8.0\n" +"POT-Creation-Date: 2004-12-13 01:06+0000\n" +"PO-Revision-Date: 2004-12-13 14:30+0800\n" +"Last-Translator: Zhenbang Wei \n" +"Language-Team: Zhenbang Wei \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=utf-8\n" +"Content-Transfer-Encoding: 8bit\n" + +#: pg_ctl.c:201 pg_ctl.c:216 pg_ctl.c:1342 +#, c-format +msgid "%s: out of memory\n" +msgstr "%s：記憶體用盡\n" + +#: pg_ctl.c:250 +#, c-format +msgid "%s: could not open PID file \"%s\": %s" +msgstr "%s：無法開啟PID檔\"%s\"：%s" + +#: pg_ctl.c:469 +#, c-format +msgid "" +"%s: another postmaster may be running; trying to start postmaster anyway\n" +msgstr "%s：可能有另一個postmaster正在執行，嘗試強制啟動postmaster。\n" + +#: pg_ctl.c:487 +#, c-format +msgid "%s: could not read file \"%s\"\n" +msgstr "%s：無法讀取檔案\"%s\"\n" + +#: pg_ctl.c:493 +#, c-format +msgid "%s: option file \"%s\" must have exactly one line\n" +msgstr "%s：選項檔\"%s\"只能有一行內容\n" + +#: pg_ctl.c:544 +#, c-format +msgid "" +"The program \"postmaster\" is needed by %s but was not found in the\n" +"same directory as \"%s\".\n" +"Check your installation.\n" +msgstr "" +"%s 需要\"postmaster\"程式，但是在與\"%s\"相同的目錄中找不到。\n" +"檢查你的安裝。\n" + +#: pg_ctl.c:550 +#, c-format +msgid "" +"The program \"postmaster\" was found by \"%s\"\n" +"but was not the same version as %s.\n" +"Check your installation.\n" +msgstr "" +"\"%s\"已找到程式\"postmaster\"，但是與 %s 版本不符。\n" +"請檢查你的安裝。\n" + +#: pg_ctl.c:562 +#, c-format +msgid "%s: could not start postmaster: exit code was %d\n" +msgstr "%s：無法啟動postmaster：結束碼是 %d\n" + +#: pg_ctl.c:573 +#, c-format +msgid "" +"%s: could not start postmaster\n" +"Examine the log output.\n" +msgstr "" +"%s：無法啟動postmaster\n" +"請檢查log輸出\n" + +#: pg_ctl.c:582 +msgid "waiting for postmaster to start..." +msgstr "等待postmaster啟動..." + +#: pg_ctl.c:585 +msgid "could not start postmaster\n" +msgstr "無法啟動postmaster\n" + +#: pg_ctl.c:588 pg_ctl.c:654 pg_ctl.c:721 +msgid " done\n" +msgstr " 完成\n" + +#: pg_ctl.c:589 +msgid "postmaster started\n" +msgstr "postmaster已經啟動\n" + +#: pg_ctl.c:593 +msgid "postmaster starting\n" +msgstr "postmaster正在啟動\n" + +#: pg_ctl.c:607 pg_ctl.c:675 pg_ctl.c:735 +#, c-format +msgid "%s: PID file \"%s\" does not exist\n" +msgstr "%s：PID檔\"%s\"不存在\n" + +#: pg_ctl.c:608 pg_ctl.c:676 pg_ctl.c:736 +msgid "Is postmaster running?\n" +msgstr "postmaster是否正在執行？\n" + +#: pg_ctl.c:614 +#, c-format +msgid "%s: cannot stop postmaster; postgres is running (PID: %ld)\n" +msgstr "%s：無法停止postmaster，postgres正在執行(PID：%ld)\n" + +#: pg_ctl.c:622 pg_ctl.c:693 +#, c-format +msgid "%s: could not send stop signal (PID: %ld): %s\n" +msgstr "%s：無法傳送stop信號(PID：%ld)：%s\n" + +#: pg_ctl.c:629 +msgid "postmaster shutting down\n" +msgstr "postmaster正在關閉\n" + +#: pg_ctl.c:634 pg_ctl.c:698 +msgid "waiting for postmaster to shut down..." +msgstr "等待postmaster關閉..." + +#: pg_ctl.c:649 pg_ctl.c:715 +msgid " failed\n" +msgstr " 失敗\n" + +#: pg_ctl.c:651 pg_ctl.c:717 +#, c-format +msgid "%s: postmaster does not shut down\n" +msgstr "%s：postmaster無法關閉\n" + +#: pg_ctl.c:656 pg_ctl.c:722 +msgid "postmaster stopped\n" +msgstr "postmaster停止執行\n" + +#: pg_ctl.c:677 +msgid "starting postmaster anyway\n" +msgstr "強制啟動postmaster\n" + +#: pg_ctl.c:684 +#, c-format +msgid "%s: cannot restart postmaster; postgres is running (PID: %ld)\n" +msgstr "%s：無法重新啟動postmaster，postgres正在執行(PID：%ld)\n" + +#: pg_ctl.c:687 pg_ctl.c:745 +msgid "Please terminate postgres and try again.\n" +msgstr "請結束postgres然後再試一次。\n" + +#: pg_ctl.c:742 +#, c-format +msgid "%s: cannot reload postmaster; postgres is running (PID: %ld)\n" +msgstr "%s：無法重新載入postmaster， postgres正在執行(PID：%ld)\n" + +#: pg_ctl.c:751 +#, c-format +msgid "%s: could not send reload signal (PID: %ld): %s\n" +msgstr "%s：無法傳送reload信號(PID：%ld)：%s\n" + +#: pg_ctl.c:756 +msgid "postmaster signaled\n" +msgstr "已通知postmaster\n" + +#: pg_ctl.c:771 +#, c-format +msgid "%s: neither postmaster nor postgres running\n" +msgstr "%s：postmaster或postgres尚未執行\n" + +#: pg_ctl.c:777 +#, c-format +msgid "%s: a standalone backend \"postgres\" is running (PID: %ld)\n" +msgstr "%s：一個獨立後端\"postgres\"正在執行(PID：%ld)\n" + +#: pg_ctl.c:784 +#, c-format +msgid "%s: postmaster is running (PID: %ld)\n" +msgstr "%s：postmaster正在執行(PID：%ld)\n" + +#: pg_ctl.c:800 +#, c-format +msgid "%s: could not send signal %d (PID: %ld): %s\n" +msgstr "%s：無法傳送信號 %d(PID：%ld)：%s\n" + +#: pg_ctl.c:833 +#, c-format +msgid "%s: could not find own program executable\n" +msgstr "%s：找不到程式執行檔\n" + +#: pg_ctl.c:842 +#, c-format +msgid "%s: could not find postmaster program executable\n" +msgstr "%s：找不到postmaster執行檔\n" + +#: pg_ctl.c:896 pg_ctl.c:928 +#, c-format +msgid "%s: could not open service manager\n" +msgstr "%s：無法開啟服務管理員\n" + +#: pg_ctl.c:902 +#, c-format +msgid "%s: service \"%s\" already registered\n" +msgstr "%s：服務\"%s\"已經被註冊\n" + +#: pg_ctl.c:913 +#, c-format +msgid "%s: could not register service \"%s\": error code %d\n" +msgstr "%s：無法註冊服務\"%s\"：錯誤代碼%d\n" + +#: pg_ctl.c:934 +#, c-format +msgid "%s: service \"%s\" not registered\n" +msgstr "%s：服務\"%s\"未被註冊\n" + +#: pg_ctl.c:941 +#, c-format +msgid "%s: could not open service \"%s\": error code %d\n" +msgstr "%s：無法開啟服務\"%s\"：錯誤代碼%d\n" + +#: pg_ctl.c:948 +#, c-format +msgid "%s: could not unregister service \"%s\": error code %d\n" +msgstr "%s：無法移除服務\"%s\"：錯誤代碼%d\n" + +#: pg_ctl.c:1085 +#, c-format +msgid "Try \"%s --help\" for more information.\n" +msgstr "執行\"%s --help\"以顯示更多資訊。\n" + +#: pg_ctl.c:1093 +#, c-format +msgid "" +"%s is a utility to start, stop, restart, reload configuration files,\n" +"report the status of a PostgreSQL server, or signal a PostgreSQL process.\n" +"\n" +msgstr "" +"%s 可以用來啟動、停止、重新啟動、重新載入設定檔、\n" +"報告PostgreSQL伺服器狀態，或送信號給PostgreSQL行程。\n" +"\n" + +#: pg_ctl.c:1095 +msgid "Usage:\n" +msgstr "使用方法：\n" + +#: pg_ctl.c:1096 +#, c-format +msgid " %s start [-w] [-D DATADIR] [-s] [-l FILENAME] [-o \"OPTIONS\"]\n" +msgstr " %s start [-w] [-D 資料目錄] [-s] [-l 檔名] [-o \"選項\"]\n" + +#: pg_ctl.c:1097 +#, c-format +msgid " %s stop [-W] [-D DATADIR] [-s] [-m SHUTDOWN-MODE]\n" +msgstr " %s stop [-W] [-D 資料目錄] [-s] [-m 關閉模式]\n" + +#: pg_ctl.c:1098 +#, c-format +msgid "" +" %s restart [-w] [-D DATADIR] [-s] [-m SHUTDOWN-MODE] [-o \"OPTIONS\"]\n" +msgstr " %s restart [-w] [-D 資料目錄] [-s] [-m 關閉模式] [-o \"選項\"]\n" + +#: pg_ctl.c:1099 +#, c-format +msgid " %s reload [-D DATADIR] [-s]\n" +msgstr " %s reload [-D 資料目錄] [-s]\n" + +#: pg_ctl.c:1100 +#, c-format +msgid " %s status [-D DATADIR]\n" +msgstr " %s status [-D 資料目錄]\n" + +#: pg_ctl.c:1101 +#, c-format +msgid " %s kill SIGNALNAME PID\n" +msgstr " %s kill 信號名稱 PID\n" + +#: pg_ctl.c:1103 +#, c-format +msgid "" +" %s register [-N SERVICENAME] [-U USERNAME] [-P PASSWORD] [-D DATADIR]\n" +" [-w] [-o \"OPTIONS\"]\n" +msgstr "" +" %s register [-N 服務名稱] [-U 使用者] [-P 密碼] [-D 資料目錄] [-w]\n" +" [-o \"選項\"]\n" + +#: pg_ctl.c:1105 +#, c-format +msgid " %s unregister [-N SERVICENAME]\n" +msgstr " %s unregister [-N 服務名稱]\n" + +#: pg_ctl.c:1108 +msgid "" +"\n" +"Common options:\n" +msgstr "" +"\n" +"一般選項：\n" + +#: pg_ctl.c:1109 +msgid " -D, --pgdata DATADIR location of the database storage area\n" +msgstr " -D, --pgdata 資料目錄 存放資料庫的目錄\n" + +#: pg_ctl.c:1110 +msgid " -s, --silent only print errors, no informational messages\n" +msgstr " -s, --silent 只顯示錯誤，不顯示其它訊息\n" + +#: pg_ctl.c:1111 +msgid " -w wait until operation completes\n" +msgstr " -w 等待操作完成\n" + +#: pg_ctl.c:1112 +msgid " -W do not wait until operation completes\n" +msgstr " -W 不等待操作完成\n" + +#: pg_ctl.c:1113 +msgid " --help show this help, then exit\n" +msgstr " --help 顯示這份說明然後結束\n" + +#: pg_ctl.c:1114 +msgid " --version output version information, then exit\n" +msgstr " --version 顯示版本資訊然後結束\n" + +#: pg_ctl.c:1115 +msgid "" +"(The default is to wait for shutdown, but not for start or restart.)\n" +"\n" +msgstr "" +"(預設是關閉時而非啟動或重新啟動時等待。)\n" +"\n" + +#: pg_ctl.c:1116 +msgid "If the -D option is omitted, the environment variable PGDATA is used.\n" +msgstr "如果沒有使用選項 -D，改用環境變數PGDATA。\n" + +#: pg_ctl.c:1118 +msgid "" +"\n" +"Options for start or restart:\n" +msgstr "" +"\n" +"啟動或重新啟動可用選項：\n" + +#: pg_ctl.c:1119 +msgid " -l, --log FILENAME write (or append) server log to FILENAME\n" +msgstr " -l, --log 檔名 將伺服器log寫入(或附加至)檔案。\n" + +#: pg_ctl.c:1120 +msgid "" +" -o OPTIONS command line options to pass to the postmaster\n" +" (PostgreSQL server executable)\n" +msgstr "" +" -o 選項 傳給postmaster(PostgreSQL伺服器執行檔)的\n" +" 命令列選項\n" + +#: pg_ctl.c:1122 +msgid " -p PATH-TO-POSTMASTER normally not necessary\n" +msgstr " -p postmaster的路徑 通常不需要\n" + +#: pg_ctl.c:1124 +msgid "" +"\n" +"Options for stop or restart:\n" +msgstr "" +"\n" +"停止或重新啟動可用選項：\n" + +#: pg_ctl.c:1125 +msgid " -m SHUTDOWN-MODE may be \"smart\", \"fast\", or \"immediate\"\n" +msgstr " -m 關閉模式 可以是\"smart\"、\"fast\"或\"immediate\"\n" + +#: pg_ctl.c:1127 +msgid "" +"\n" +"Shutdown modes are:\n" +msgstr "" +"\n" +"可用關閉模式：\n" + +#: pg_ctl.c:1128 +msgid " smart quit after all clients have disconnected\n" +msgstr " smart 在所有用戶端斷線後關閉\n" + +#: pg_ctl.c:1129 +msgid " fast quit directly, with proper shutdown\n" +msgstr " fast 直接正常關閉\n" + +#: pg_ctl.c:1130 +msgid "" +" immediate quit without complete shutdown; will lead to recovery on " +"restart\n" +msgstr " immediate 立即結束，會導致下次啟動時需要復原程序\n" + +#: pg_ctl.c:1132 +msgid "" +"\n" +"Allowed signal names for kill:\n" +msgstr "" +"\n" +"kill可以使用的信號名稱：\n" + +#: pg_ctl.c:1136 +msgid "" +"\n" +"Options for register and unregister:\n" +msgstr "" +"\n" +"註冊或移除註冊可用選項：\n" + +#: pg_ctl.c:1137 +msgid "" +" -N SERVICENAME service name with which to register PostgreSQL server\n" +msgstr " -N 服務名稱 用來註冊PostgreSQL伺服器的服務名稱\n" + +#: pg_ctl.c:1138 +msgid " -P PASSWORD password of account to register PostgreSQL server\n" +msgstr " -P 密碼 用來註冊PostgreSQL伺服器的密碼\n" + +#: pg_ctl.c:1139 +msgid " -U USERNAME user name of account to register PostgreSQL server\n" +msgstr " -U 使用者 用來註冊PostgreSQL伺服器的帳號\n" + +#: pg_ctl.c:1142 +msgid "" +"\n" +"Report bugs to .\n" +msgstr "" +"\n" +"回報錯誤至。\n" + +#: pg_ctl.c:1167 +#, c-format +msgid "%s: unrecognized shutdown mode \"%s\"\n" +msgstr "%s：無效的關閉模式\"%s\"\n" + +#: pg_ctl.c:1200 +#, c-format +msgid "%s: unrecognized signal name \"%s\"\n" +msgstr "%s：無效的信號名稱\"%s\"\n" + +#: pg_ctl.c:1265 +#, c-format +msgid "" +"%s: cannot be run as root\n" +"Please log in (using, e.g., \"su\") as the (unprivileged) user that will\n" +"own the server process.\n" +msgstr "" +"%s：無法以root身份執行\n" +"請以將會擁有伺服務行程的(非特權)使用者登入(例如用\"su\"命令)。\n" + +#: pg_ctl.c:1358 +#, c-format +msgid "%s: invalid option %s\n" +msgstr "%s：無效的選項 %s\n" + +#: pg_ctl.c:1369 +#, c-format +msgid "%s: too many command-line arguments (first is \"%s\")\n" +msgstr "%s：命令列參數過多(第一個是\"%s\")\n" + +#: pg_ctl.c:1388 +#, c-format +msgid "%s: missing arguments for kill mode\n" +msgstr "%s：kill模式未指定參數\n" + +#: pg_ctl.c:1406 +#, c-format +msgid "%s: unrecognized operation mode \"%s\"\n" +msgstr "%s：無效的操作模式\"%s\"\n" + +#: pg_ctl.c:1416 +#, c-format +msgid "%s: no operation specified\n" +msgstr "%s：未指定操作方式\n" + +#: pg_ctl.c:1432 +#, c-format +msgid "" +"%s: no database directory specified and environment variable PGDATA unset\n" +msgstr "%s：未指定資料目錄和設定環境變數PGDATA\n" + +#: ../../port/exec.c:193 ../../port/exec.c:307 ../../port/exec.c:350 +#, c-format +msgid "could not identify current directory: %s" +msgstr "無法識別目前的目錄：%s" + +#: ../../port/exec.c:323 ../../port/exec.c:359 +#, c-format +msgid "could not change directory to \"%s\"" +msgstr "無法切換目錄至\"%s\"" + +#: ../../port/exec.c:338 +#, c-format +msgid "could not read symbolic link \"%s\"" +msgstr "無法讀取符號連結\"%s\"" + +#: ../../port/exec.c:569 +#, c-format +msgid "child process exited with exit code %d" +msgstr "子行程結束，結束代碼 %d" + +#: ../../port/exec.c:572 +#, c-format +msgid "child process was terminated by signal %d" +msgstr "子行程被信號 %d 結束" + +#: ../../port/exec.c:575 +#, c-format +msgid "child process exited with unrecognized status %d" msgstr "子行程結束，不明狀態代碼 %d" \ No newline at end of file diff --git a/src/bin/pg_resetxlog/po/zh_CN.po b/src/bin/pg_resetxlog/po/zh_CN.po index 0ef03a9cbb..1c5ce24c19 100644 --- a/src/bin/pg_resetxlog/po/zh_CN.po +++ b/src/bin/pg_resetxlog/po/zh_CN.po @@ -1,6 +1,6 @@ -# simplified Chinese translation file for pg_resetxlog and friends -# Bao Wei , 2002. -# +# simplified Chinese translation file for pg_resetxlog and friends +# Bao Wei , 2002. +# msgid "" msgstr "" "Project-Id-Version: PostgreSQL 8.0\n" diff --git a/src/bin/psql/po/zh_CN.po b/src/bin/psql/po/zh_CN.po index bfee783f94..347fbd5391 100644 --- a/src/bin/psql/po/zh_CN.po +++ b/src/bin/psql/po/zh_CN.po @@ -1,8 +1,8 @@ -# simplified Chinese translation file for psql -# Weiping He , 2002. -# -# $PostgreSQL: pgsql/src/bin/psql/po/zh_CN.po,v 1.9 2005/01/06 09:07:15 petere Exp $ -# +# simplified Chinese translation file for psql +# Weiping He , 2002. +# +# $PostgreSQL: pgsql/src/bin/psql/po/zh_CN.po,v 1.10 2006/01/01 10:13:55 neilc Exp $ +# msgid "" msgstr "" "Project-Id-Version: PostgreSQL 7.4\n" diff --git a/src/bin/scripts/po/it.po b/src/bin/scripts/po/it.po index cd3d00c2e5..6a7c6eeda6 100644 --- a/src/bin/scripts/po/it.po +++ b/src/bin/scripts/po/it.po @@ -1,705 +1,705 @@ -# Italian message translation file for pgscripts -# Primo autore: Fabrizio Mazzoni , 2003. -# Lavoro proseguito da Mirko Tebaldi , 2004. -# -msgid "" -msgstr "" -"Project-Id-Version: PostgreSQL 8.0\n" -"POT-Creation-Date: 2004-09-10 13:09+0100\n" -"PO-Revision-Date: 2004-09-10 20:00+0100\n" -"Last-Translator: Tebaldi Mirko\n" -"Language-Team: Mirko Tebaldi \n" -"MIME-Version: 1.0\n" -"Content-Type: text/plain; charset=iso-8859-1\n" -"Content-Transfer-Encoding: 8bit\n" - -#: clusterdb.c:95 -#: clusterdb.c:110 -#: createdb.c:102 -#: createdb.c:121 -#: createlang.c:97 -#: createlang.c:118 -#: createlang.c:160 -#: createuser.c:117 -#: createuser.c:132 -#: dropdb.c:84 -#: dropdb.c:93 -#: dropdb.c:101 -#: droplang.c:94 -#: droplang.c:115 -#: droplang.c:157 -#: dropuser.c:84 -#: dropuser.c:99 -#: vacuumdb.c:112 -#: vacuumdb.c:127 -#, c-format -msgid "Try \"%s --help\" for more information.\n" -msgstr "Prova \"%s --help\" per avere più informazioni.\n" - -#: clusterdb.c:108 -#: createdb.c:119 -#: createlang.c:116 -#: createuser.c:130 -#: dropdb.c:99 -#: droplang.c:113 -#: dropuser.c:97 -#: vacuumdb.c:125 -#, c-format -msgid "%s: too many command-line arguments (first is \"%s\")\n" -msgstr "%s: troppi parametri dalla riga di comando (il primo è \"%s\")\n" - -#: createdb.c:129 -#, c-format -msgid "%s: \"%s\" is not a valid encoding name\n" -msgstr "%s: \"%s\" non è un nome di codifica valido\n" - -#: createdb.c:168 -#, c-format -msgid "%s: database creation failed: %s" -msgstr "%s: creazione del database fallita: %s" - -#: createdb.c:196 -#, c-format -msgid "%s: comment creation failed (database was created): %s" -msgstr "%s: creazione del commento fallita (il database è stato creato): %s" - -#: createdb.c:217 -#, c-format -msgid "" -"%s creates a PostgreSQL database.\n" -"\n" -msgstr "" -"%s crea un database PostgreSQL.\n" -"\n" - -#: clusterdb.c:234 -#: createdb.c:218 -#: createlang.c:299 -#: createuser.c:240 -#: dropdb.c:147 -#: droplang.c:280 -#: dropuser.c:147 -#: vacuumdb.c:260 -msgid "Usage:\n" -msgstr "Utilizzo:\n" - -#: createdb.c:219 -#, c-format -msgid " %s [OPTION]... [DBNAME] [DESCRIPTION]\n" -msgstr " %s [OPZIONE]... [NOME_DB] [DESCRIZIONE]\n" - -#: clusterdb.c:236 -#: createdb.c:220 -#: createlang.c:301 -#: createuser.c:242 -#: dropdb.c:149 -#: droplang.c:282 -#: dropuser.c:149 -#: vacuumdb.c:262 -msgid "" -"\n" -"Options:\n" -msgstr "" -"\n" -"Opzioni:\n" - -#: createdb.c:221 -msgid " -D, --tablespace=TABLESPACE default tablespace for the database\n" -msgstr " -D, --tablespace=TABLESPACE tablespace predefinito per il database\n" - -#: createdb.c:222 -msgid " -E, --encoding=ENCODING encoding for the database\n" -msgstr " -E, --encoding=ENCODING codifica del database\n" - -#: createdb.c:223 -msgid " -O, --owner=OWNER database user to own the new database\n" -msgstr " -O, --owner=OWNER utente database propietario del nuovo database\n" - -#: createdb.c:224 -msgid " -T, --template=TEMPLATE template database to copy\n" -msgstr " -T, --template=TEMPLATE modello database da copiare\n" - -#: createdb.c:225 -msgid " -e, --echo show the commands being sent to the server\n" -msgstr " -e, --echo mostra i comandi che vengono inviati al server\n" - -#: createdb.c:226 -msgid " -q, --quiet don't write any messages\n" -msgstr " -q, --quiet non scrive nessun messaggio\n" - -#: createdb.c:227 -msgid " --help show this help, then exit\n" -msgstr " --help mostra questa guida, quindi esce\n" - -#: createdb.c:228 -msgid " --version output version information, then exit\n" -msgstr " --version mostra informazioni sulla versione e poi esce\n" - -#: clusterdb.c:244 -#: createdb.c:229 -#: createuser.c:255 -#: vacuumdb.c:273 -msgid "" -"\n" -"Connection options:\n" -msgstr "" -"\n" -"Opzioni di connessione:\n" - -#: createdb.c:230 -msgid " -h, --host=HOSTNAME database server host or socket directory\n" -msgstr " -h, --host=HOSTNAME host server database o directory socket \n" - -#: createdb.c:231 -msgid " -p, --port=PORT database server port\n" -msgstr " -p, --port=PORT porta del server database\n" - -#: createdb.c:232 -msgid " -U, --username=USERNAME user name to connect as\n" -msgstr " -U, --username=USERNAME nome utente da usare per connettersi\n" - -#: createdb.c:233 -msgid " -W, --password prompt for password\n" -msgstr " -W, --password richiede la password\n" - -#: createdb.c:234 -msgid "" -"\n" -"By default, a database with the same name as the current user is created.\n" -msgstr "" -"\n" -"Di base, un database con lo stesso nome dell'utente corrente verrà creato.\n" - -#: clusterdb.c:250 -#: createdb.c:235 -#: createlang.c:312 -#: createuser.c:262 -#: dropdb.c:159 -#: droplang.c:292 -#: dropuser.c:159 -#: vacuumdb.c:279 -msgid "" -"\n" -"Report bugs to .\n" -msgstr "" -"\n" -"Segnalare bachi a .\n" - -#: createlang.c:143 -#: droplang.c:140 -msgid "Name" -msgstr "Nome" - -#: createlang.c:143 -#: droplang.c:140 -msgid "yes" -msgstr "si" - -#: createlang.c:143 -#: droplang.c:140 -msgid "no" -msgstr "no" - -#: createlang.c:143 -#: droplang.c:140 -msgid "Trusted?" -msgstr "Affidabile?" - -#: createlang.c:150 -#: droplang.c:147 -msgid "Procedural Languages" -msgstr "Linguaggi Procedurali" - -#: createlang.c:159 -#: droplang.c:156 -#, c-format -msgid "%s: missing required argument language name\n" -msgstr "%s: parametro mancante necessario: nome del linguaggio\n" - -#: createlang.c:210 -#, c-format -msgid "%s: unsupported language \"%s\"\n" -msgstr "%s: linguaggio non supportato \"%s\"\n" - -#: createlang.c:211 -msgid "Supported languages are plpgsql, pltcl, pltclu, plperl, plperlu, and plpythonu.\n" -msgstr "I linguaggi supportati sono plpgsql, pltcl, pltclu, plperl, plperlu, and plpythonu.\n" - -#: createlang.c:226 -#, c-format -msgid "%s: language \"%s\" is already installed in database \"%s\"\n" -msgstr "%s: linguaggio \"%s\" già installato nel database \"%s\"\n" - -#: createlang.c:283 -#, c-format -msgid "%s: language installation failed: %s" -msgstr "%s: installazione linguaggio fallita: %s" - -#: createlang.c:298 -#, c-format -msgid "" -"%s installs a procedural language into a PostgreSQL database.\n" -"\n" -msgstr "" -"%s installa un linguaggio procedurale in un database PostgreSQL.\n" -"\n" - -#: createlang.c:300 -#: droplang.c:281 -#, c-format -msgid " %s [OPTION]... LANGNAME [DBNAME]\n" -msgstr " %s [OPZIONE]... NOME_LINGUAGGIO [NOME_DB]\n" - -#: createlang.c:302 -msgid " -d, --dbname=DBNAME database to install language in\n" -msgstr " -d, --dbname=NOME_DB database in cui installare il linguaggio\n" - -#: clusterdb.c:240 -#: createlang.c:303 -#: createuser.c:251 -#: dropdb.c:150 -#: droplang.c:284 -#: dropuser.c:150 -msgid " -e, --echo show the commands being sent to the server\n" -msgstr " -e, --echo mostra i comandi inviati al server\n" - -#: createlang.c:304 -#: droplang.c:285 -msgid " -l, --list show a list of currently installed languages\n" -msgstr " -l, --list mostra la lista dei linguaggi attualmente installati\n" - -#: createlang.c:305 -msgid " -L, --pglib=DIRECTORY find language interpreter file in DIRECTORY\n" -msgstr " -L, --pglib=CARTELLA cerca il file di interpretazione linguaggio in CARTELLA\n" - -#: clusterdb.c:245 -#: createlang.c:306 -#: createuser.c:256 -#: dropdb.c:153 -#: droplang.c:286 -#: dropuser.c:153 -#: vacuumdb.c:274 -msgid " -h, --host=HOSTNAME database server host or socket directory\n" -msgstr " -h, --host=NOME_HOST indirizzo database o directory socket\n" - -#: clusterdb.c:246 -#: createlang.c:307 -#: createuser.c:257 -#: dropdb.c:154 -#: droplang.c:287 -#: dropuser.c:154 -#: vacuumdb.c:275 -msgid " -p, --port=PORT database server port\n" -msgstr " -p, --port=PORTA porta del server database\n" - -#: clusterdb.c:247 -#: createlang.c:308 -#: dropdb.c:155 -#: droplang.c:288 -#: vacuumdb.c:276 -msgid " -U, --username=USERNAME user name to connect as\n" -msgstr " -U, --username=UTENTE nome utente da utilizzare per la connessione\n" - -#: clusterdb.c:248 -#: createlang.c:309 -#: dropdb.c:156 -#: droplang.c:289 -#: vacuumdb.c:277 -msgid " -W, --password prompt for password\n" -msgstr " -W, --password richiedi una password\n" - -#: clusterdb.c:242 -#: createlang.c:310 -#: createuser.c:253 -#: dropdb.c:157 -#: droplang.c:290 -#: dropuser.c:157 -msgid " --help show this help, then exit\n" -msgstr " --help mostra questo aiuto e poi esci\n" - -#: clusterdb.c:243 -#: createlang.c:311 -#: createuser.c:254 -#: dropdb.c:158 -#: droplang.c:291 -#: dropuser.c:158 -msgid " --version output version information, then exit\n" -msgstr " --version mostra informazioni sulla versione, poi esci\n" - -#: createuser.c:142 -#, c-format -msgid "%s: user ID must be a positive number\n" -msgstr "%s: ID utente deve essere un numero positivo\n" - -#: createuser.c:148 -msgid "Enter name of user to add: " -msgstr "Inserisci il nome dell'utente da aggiungere:" - -#: createuser.c:155 -msgid "Enter password for new user: " -msgstr "Inserisci la password per il nuovo utente:" - -#: createuser.c:156 -msgid "Enter it again: " -msgstr "Conferma password:" - -#: createuser.c:159 -msgid "Passwords didn't match.\n" -msgstr "Le password non corrispondono. \n" - -#: createuser.c:170 -msgid "Shall the new user be allowed to create databases? (y/n) " -msgstr "Il nuovo utente può creare database? (s/n)" - -#: createuser.c:181 -msgid "Shall the new user be allowed to create more new users? (y/n) " -msgstr "Il nuovo utente può creare altri utenti? (s/n)" - -#: createuser.c:220 -#, c-format -msgid "%s: creation of new user failed: %s" -msgstr "%s: creazione del nuovo utente fallita: %s" - -#: createuser.c:239 -#, c-format -msgid "" -"%s creates a new PostgreSQL user.\n" -"\n" -msgstr "" -"%s crea un nuovo utente PostgreSQL.\n" -"\n" - -#: createuser.c:241 -#: dropuser.c:148 -#, c-format -msgid " %s [OPTION]... [USERNAME]\n" -msgstr " %s [OPZIONI]... [NOME_UTENTE]\n" - -#: createuser.c:243 -msgid " -a, --adduser user can add new users\n" -msgstr " -a, --adduser l'utente può creare altri utenti\n" - -#: createuser.c:244 -msgid " -A, --no-adduser user cannot add new users\n" -msgstr " -A, --no-adduser l'utente non può creare utenti\n" - -#: createuser.c:245 -msgid " -d, --createdb user can create new databases\n" -msgstr " -d, --createdb l'utente può creare database\n" - -#: createuser.c:246 -msgid " -D, --no-createdb user cannot create databases\n" -msgstr " -D, --no-createdb l'utente non può creare database\n" - -#: createuser.c:247 -msgid " -P, --pwprompt assign a password to new user\n" -msgstr " -P, --pwprompt assegna una password al nuovo utente\n" - -#: createuser.c:248 -msgid " -E, --encrypted encrypt stored password\n" -msgstr " -E, --encrypted cifra la password salvata\n" - -#: createuser.c:249 -msgid " -N, --unencrypted do not encrypt stored password\n" -msgstr " -N, --unencrypted non cifrare la password salvata\n" - -#: createuser.c:250 -msgid " -i, --sysid=SYSID select sysid for new user\n" -msgstr " -i, --sysid=SYSID seleziona un sysid per il nuovo utente\n" - -#: clusterdb.c:241 -#: createuser.c:252 -#: dropdb.c:152 -#: dropuser.c:152 -msgid " -q, --quiet don't write any messages\n" -msgstr " -q, --quiet non stampare messaggi\n" - -#: createuser.c:258 -msgid " -U, --username=USERNAME user name to connect as (not the one to create)\n" -msgstr " -U, --username=UTENTE nome utente con cui collegarsi (non quello da creare)\n" - -#: createuser.c:259 -#: dropuser.c:156 -msgid " -W, --password prompt for password to connect\n" -msgstr " -W, --password richiedi una password per connettersi\n" - -#: createuser.c:260 -msgid "" -"\n" -"If one of -a, -A, -d, -D, and USERNAME is not specified, you will\n" -"be prompted interactively.\n" -msgstr "" -"\n" -"Se uno tra -a, -A, -d, -D ed UTENTE non è specificato, ti sarà richesto interattivamente.\n" - -#: dropdb.c:92 -#, c-format -msgid "%s: missing required argument database name\n" -msgstr "%s: parametro mancante, nome del database\n" - -#: dropdb.c:109 -#, c-format -msgid "Database \"%s\" will be permanently removed.\n" -msgstr "Il database \"%s\" sarà eliminato definitivamente.\n" - -#: dropdb.c:110 -#: dropuser.c:111 -msgid "Are you sure? (y/n) " -msgstr "Sei sicuro? (s/n)" - -#: dropdb.c:127 -#, c-format -msgid "%s: database removal failed: %s" -msgstr "%s: eliminazione database fallita: %s" - -#: dropdb.c:146 -#, c-format -msgid "" -"%s removes a PostgreSQL database.\n" -"\n" -msgstr "" -"%s elimina un database PostgreSQL.\n" -"\n" - -#: dropdb.c:148 -#, c-format -msgid " %s [OPTION]... DBNAME\n" -msgstr " %s [OPZIONE]... NOME_DB\n" - -#: dropdb.c:151 -#: dropuser.c:151 -msgid " -i, --interactive prompt before deleting anything\n" -msgstr " -i, --interactive chiedi conferma prima di eseguire un operazione\n" - -#: droplang.c:176 -#, c-format -msgid "%s: language \"%s\" is not installed in database \"%s\"\n" -msgstr "%s: linguaggio \"%s\" non installato nel database \"%s\"\n" - -#: droplang.c:193 -#, c-format -msgid "%s: still %s functions declared in language \"%s\"; language not removed\n" -msgstr "%s: ancora %s funzioni dichiarate nel linguaggio \"%s\"; linguaggio non eliminato\n" - -#: droplang.c:265 -#, c-format -msgid "%s: language removal failed: %s" -msgstr "%s: eliminazione linguaggio fallita: %s" - -#: droplang.c:279 -#, c-format -msgid "" -"%s removes a procedural language from a database.\n" -"\n" -msgstr "" -"%s elimina un linguaggio procedurale da un database.\n" -"\n" - -#: droplang.c:283 -msgid " -d, --dbname=DBNAME database from which to remove the language\n" -msgstr " -d, --dbname=NOME_DB database dal quale eliminare il linguaggio\n" - -#: dropuser.c:104 -msgid "Enter name of user to drop: " -msgstr "Inserisci il nome dell'utente da eliminare:" - -#: dropuser.c:110 -#, c-format -msgid "User \"%s\" will be permanently removed.\n" -msgstr "L'utente \"%s\" sarà permanentemente eliminato.\n" - -#: dropuser.c:127 -#, c-format -msgid "%s: removal of user \"%s\" failed: %s" -msgstr "%s: eliminazione dell'utente \"%s\" fallita: %s" - -#: dropuser.c:146 -#, c-format -msgid "" -"%s removes a PostgreSQL user.\n" -"\n" -msgstr "" -"%s elimina un utente PostgreSQL.\n" -"\n" - -#: dropuser.c:155 -msgid " -U, --username=USERNAME user name to connect as (not the one to drop)\n" -msgstr " -U, --username=UTENTE nome utente con cui collegarsi (non quello da eliminare)\n" - -#: clusterdb.c:118 -#, c-format -msgid "%s: cannot cluster all databases and a specific one at the same time\n" -msgstr "%s: impossibile riordinare tutti i database ed uno specifico nello stesso momento\n" - -#: clusterdb.c:124 -#, c-format -msgid "%s: cannot cluster a specific table in all databases\n" -msgstr "%s: impossibile riordinare una tabella specifica in tutti i database\n" - -#: clusterdb.c:180 -#, c-format -msgid "%s: clustering of table \"%s\" in database \"%s\" failed: %s" -msgstr "%s: il riordino della tabella \"%s\" nel database \"%s\" è fallito: %s" - -#: clusterdb.c:183 -#, c-format -msgid "%s: clustering of database \"%s\" failed: %s" -msgstr "%s: il riordino del database \"%s\" è fallito: %s" - -#: clusterdb.c:219 -#, c-format -msgid "%s: clustering database \"%s\"\n" -msgstr "%s: riordino del database \"%s\"\n" - -#: clusterdb.c:233 -#, c-format -msgid "" -"%s clusters all previously clustered tables in a database.\n" -"\n" -msgstr "" -"%s riordina tutte le tabelle precedentemente riordinate nel database.\n" -"\n" - -#: clusterdb.c:235 -#: vacuumdb.c:261 -#, c-format -msgid " %s [OPTION]... [DBNAME]\n" -msgstr " %s [OPZIONI]... [NOME_DB]\n" - -#: clusterdb.c:237 -msgid " -a, --all cluster all databases\n" -msgstr " -a, --all riordina tutti i database\n" - -#: clusterdb.c:238 -msgid " -d, --dbname=DBNAME database to cluster\n" -msgstr " -d, --dbname=NOME_DB database da riordinare\n" - -#: clusterdb.c:239 -msgid " -t, --table=TABLE cluster specific table only\n" -msgstr " -t, --table=TABELLA riordina solo una tabella\n" - -#: clusterdb.c:249 -msgid "" -"\n" -"Read the description of the SQL command CLUSTER for details.\n" -msgstr "" -"\n" -"Consulta la descrizione del comando SQL CLUSTER per maggiori informazioni.\n" - -#: vacuumdb.c:135 -#, c-format -msgid "%s: cannot vacuum all databases and a specific one at the same time\n" -msgstr "%s: impossibile effettuare la pulizia di tutti i database e di uno in particolare nello stesso momento\n" - -#: vacuumdb.c:141 -#, c-format -msgid "%s: cannot vacuum a specific table in all databases\n" -msgstr "%s: impossibile effettuare la pulizia di una tabella specifica in tutti i database\n" - -#: vacuumdb.c:205 -#, c-format -msgid "%s: vacuuming of table \"%s\" in database \"%s\" failed: %s" -msgstr "%s: la pulizia della tabella \"%s\" nel database \"%s\" è fallito: %s" - -#: vacuumdb.c:208 -#, c-format -msgid "%s: vacuuming of database \"%s\" failed: %s" -msgstr "%s: la pulizia del database \"%s\" è fallito: %s" - -#: vacuumdb.c:245 -#, c-format -msgid "%s: vacuuming database \"%s\"\n" -msgstr "%s: pulizia del database \"%s\"\n" - -#: vacuumdb.c:259 -#, c-format -msgid "" -"%s cleans and analyzes a PostgreSQL database.\n" -"\n" -msgstr "" -"%s pulisce ed analizza un database PostgreSQL.\n" -"\n" - -#: vacuumdb.c:263 -msgid " -a, --all vacuum all databases\n" -msgstr " -a, --all pulisci tutti i database\n" - -#: vacuumdb.c:264 -msgid " -d, --dbname=DBNAME database to vacuum\n" -msgstr " -d, --dbname=NOME_DB database da pulire\n" - -#: vacuumdb.c:265 -msgid " -t, --table='TABLE[(COLUMNS)]' vacuum specific table only\n" -msgstr " -t, --table='TABELLA[(COLONNE)]' pulisci solamente una tabella specifica\n" - -#: vacuumdb.c:266 -msgid " -f, --full do full vacuuming\n" -msgstr " -f, --full esegui una pulizia completa\n" - -#: vacuumdb.c:267 -msgid " -z, --analyze update optimizer hints\n" -msgstr " -z, --analyze aggiorna i suggerimenti per l'ottimizzazione\n" - -#: vacuumdb.c:268 -msgid " -e, --echo show the commands being sent to the server\n" -msgstr " -e, --echo mostra i comandi inviati al server\n" - -#: vacuumdb.c:269 -msgid " -q, --quiet don't write any messages\n" -msgstr " -q, --quiet non stampare alcun messaggio\n" - -#: vacuumdb.c:270 -msgid " -v, --verbose write a lot of output\n" -msgstr " -v, --verbose mostra molti messaggi\n" - -#: vacuumdb.c:271 -msgid " --help show this help, then exit\n" -msgstr " --help mostra questi aiuti ed esci\n" - -#: vacuumdb.c:272 -msgid " --version output version information, then exit\n" -msgstr " --version mostra informazioni sulla versione e poi esci\n" - -#: vacuumdb.c:278 -msgid "" -"\n" -"Read the description of the SQL command VACUUM for details.\n" -msgstr "" -"\n" -"Consulta la descrizione del comando SQL VACUUM per maggiori informazioni.\n" - -#: common.c:86 -#: common.c:112 -msgid "Password: " -msgstr "Password: " - -#: common.c:99 -#, c-format -msgid "%s: could not connect to database %s\n" -msgstr "%s: impossibile connettersi al database %s\n" - -#: common.c:122 -#, c-format -msgid "%s: could not connect to database %s: %s" -msgstr "%s: impossibile connettersi al database %s: %s" - -#: common.c:146 -#, c-format -msgid "%s: query failed: %s" -msgstr "%s: query fallita: %s" - -#: common.c:147 -#, c-format -msgid "%s: query was: %s\n" -msgstr "%s: query eseguita: %s\n" - -#. translator: Make sure the (y/n) prompts match the translation of this. -#: common.c:161 -msgid "y" -msgstr "s" - -#. translator: Make sure the (y/n) prompts match the translation of this. -#: common.c:163 -msgid "n" -msgstr "n" - +# Italian message translation file for pgscripts +# Primo autore: Fabrizio Mazzoni , 2003. +# Lavoro proseguito da Mirko Tebaldi , 2004. +# +msgid "" +msgstr "" +"Project-Id-Version: PostgreSQL 8.0\n" +"POT-Creation-Date: 2004-09-10 13:09+0100\n" +"PO-Revision-Date: 2004-09-10 20:00+0100\n" +"Last-Translator: Tebaldi Mirko\n" +"Language-Team: Mirko Tebaldi \n" +"MIME-Version: 1.0\n" +"Content-Type: text/plain; charset=iso-8859-1\n" +"Content-Transfer-Encoding: 8bit\n" + +#: clusterdb.c:95 +#: clusterdb.c:110 +#: createdb.c:102 +#: createdb.c:121 +#: createlang.c:97 +#: createlang.c:118 +#: createlang.c:160 +#: createuser.c:117 +#: createuser.c:132 +#: dropdb.c:84 +#: dropdb.c:93 +#: dropdb.c:101 +#: droplang.c:94 +#: droplang.c:115 +#: droplang.c:157 +#: dropuser.c:84 +#: dropuser.c:99 +#: vacuumdb.c:112 +#: vacuumdb.c:127 +#, c-format +msgid "Try \"%s --help\" for more information.\n" +msgstr "Prova \"%s --help\" per avere più informazioni.\n" + +#: clusterdb.c:108 +#: createdb.c:119 +#: createlang.c:116 +#: createuser.c:130 +#: dropdb.c:99 +#: droplang.c:113 +#: dropuser.c:97 +#: vacuumdb.c:125 +#, c-format +msgid "%s: too many command-line arguments (first is \"%s\")\n" +msgstr "%s: troppi parametri dalla riga di comando (il primo è \"%s\")\n" + +#: createdb.c:129 +#, c-format +msgid "%s: \"%s\" is not a valid encoding name\n" +msgstr "%s: \"%s\" non è un nome di codifica valido\n" + +#: createdb.c:168 +#, c-format +msgid "%s: database creation failed: %s" +msgstr "%s: creazione del database fallita: %s" + +#: createdb.c:196 +#, c-format +msgid "%s: comment creation failed (database was created): %s" +msgstr "%s: creazione del commento fallita (il database è stato creato): %s" + +#: createdb.c:217 +#, c-format +msgid "" +"%s creates a PostgreSQL database.\n" +"\n" +msgstr "" +"%s crea un database PostgreSQL.\n" +"\n" + +#: clusterdb.c:234 +#: createdb.c:218 +#: createlang.c:299 +#: createuser.c:240 +#: dropdb.c:147 +#: droplang.c:280 +#: dropuser.c:147 +#: vacuumdb.c:260 +msgid "Usage:\n" +msgstr "Utilizzo:\n" + +#: createdb.c:219 +#, c-format +msgid " %s [OPTION]... [DBNAME] [DESCRIPTION]\n" +msgstr " %s [OPZIONE]... [NOME_DB] [DESCRIZIONE]\n" + +#: clusterdb.c:236 +#: createdb.c:220 +#: createlang.c:301 +#: createuser.c:242 +#: dropdb.c:149 +#: droplang.c:282 +#: dropuser.c:149 +#: vacuumdb.c:262 +msgid "" +"\n" +"Options:\n" +msgstr "" +"\n" +"Opzioni:\n" + +#: createdb.c:221 +msgid " -D, --tablespace=TABLESPACE default tablespace for the database\n" +msgstr " -D, --tablespace=TABLESPACE tablespace predefinito per il database\n" + +#: createdb.c:222 +msgid " -E, --encoding=ENCODING encoding for the database\n" +msgstr " -E, --encoding=ENCODING codifica del database\n" + +#: createdb.c:223 +msgid " -O, --owner=OWNER database user to own the new database\n" +msgstr " -O, --owner=OWNER utente database propietario del nuovo database\n" + +#: createdb.c:224 +msgid " -T, --template=TEMPLATE template database to copy\n" +msgstr " -T, --template=TEMPLATE modello database da copiare\n" + +#: createdb.c:225 +msgid " -e, --echo show the commands being sent to the server\n" +msgstr " -e, --echo mostra i comandi che vengono inviati al server\n" + +#: createdb.c:226 +msgid " -q, --quiet don't write any messages\n" +msgstr " -q, --quiet non scrive nessun messaggio\n" + +#: createdb.c:227 +msgid " --help show this help, then exit\n" +msgstr " --help mostra questa guida, quindi esce\n" + +#: createdb.c:228 +msgid " --version output version information, then exit\n" +msgstr " --version mostra informazioni sulla versione e poi esce\n" + +#: clusterdb.c:244 +#: createdb.c:229 +#: createuser.c:255 +#: vacuumdb.c:273 +msgid "" +"\n" +"Connection options:\n" +msgstr "" +"\n" +"Opzioni di connessione:\n" + +#: createdb.c:230 +msgid " -h, --host=HOSTNAME database server host or socket directory\n" +msgstr " -h, --host=HOSTNAME host server database o directory socket \n" + +#: createdb.c:231 +msgid " -p, --port=PORT database server port\n" +msgstr " -p, --port=PORT porta del server database\n" + +#: createdb.c:232 +msgid " -U, --username=USERNAME user name to connect as\n" +msgstr " -U, --username=USERNAME nome utente da usare per connettersi\n" + +#: createdb.c:233 +msgid " -W, --password prompt for password\n" +msgstr " -W, --password richiede la password\n" + +#: createdb.c:234 +msgid "" +"\n" +"By default, a database with the same name as the current user is created.\n" +msgstr "" +"\n" +"Di base, un database con lo stesso nome dell'utente corrente verrà creato.\n" + +#: clusterdb.c:250 +#: createdb.c:235 +#: createlang.c:312 +#: createuser.c:262 +#: dropdb.c:159 +#: droplang.c:292 +#: dropuser.c:159 +#: vacuumdb.c:279 +msgid "" +"\n" +"Report bugs to .\n" +msgstr "" +"\n" +"Segnalare bachi a .\n" + +#: createlang.c:143 +#: droplang.c:140 +msgid "Name" +msgstr "Nome" + +#: createlang.c:143 +#: droplang.c:140 +msgid "yes" +msgstr "si" + +#: createlang.c:143 +#: droplang.c:140 +msgid "no" +msgstr "no" + +#: createlang.c:143 +#: droplang.c:140 +msgid "Trusted?" +msgstr "Affidabile?" + +#: createlang.c:150 +#: droplang.c:147 +msgid "Procedural Languages" +msgstr "Linguaggi Procedurali" + +#: createlang.c:159 +#: droplang.c:156 +#, c-format +msgid "%s: missing required argument language name\n" +msgstr "%s: parametro mancante necessario: nome del linguaggio\n" + +#: createlang.c:210 +#, c-format +msgid "%s: unsupported language \"%s\"\n" +msgstr "%s: linguaggio non supportato \"%s\"\n" + +#: createlang.c:211 +msgid "Supported languages are plpgsql, pltcl, pltclu, plperl, plperlu, and plpythonu.\n" +msgstr "I linguaggi supportati sono plpgsql, pltcl, pltclu, plperl, plperlu, and plpythonu.\n" + +#: createlang.c:226 +#, c-format +msgid "%s: language \"%s\" is already installed in database \"%s\"\n" +msgstr "%s: linguaggio \"%s\" già installato nel database \"%s\"\n" + +#: createlang.c:283 +#, c-format +msgid "%s: language installation failed: %s" +msgstr "%s: installazione linguaggio fallita: %s" + +#: createlang.c:298 +#, c-format +msgid "" +"%s installs a procedural language into a PostgreSQL database.\n" +"\n" +msgstr "" +"%s installa un linguaggio procedurale in un database PostgreSQL.\n" +"\n" + +#: createlang.c:300 +#: droplang.c:281 +#, c-format +msgid " %s [OPTION]... LANGNAME [DBNAME]\n" +msgstr " %s [OPZIONE]... NOME_LINGUAGGIO [NOME_DB]\n" + +#: createlang.c:302 +msgid " -d, --dbname=DBNAME database to install language in\n" +msgstr " -d, --dbname=NOME_DB database in cui installare il linguaggio\n" + +#: clusterdb.c:240 +#: createlang.c:303 +#: createuser.c:251 +#: dropdb.c:150 +#: droplang.c:284 +#: dropuser.c:150 +msgid " -e, --echo show the commands being sent to the server\n" +msgstr " -e, --echo mostra i comandi inviati al server\n" + +#: createlang.c:304 +#: droplang.c:285 +msgid " -l, --list show a list of currently installed languages\n" +msgstr " -l, --list mostra la lista dei linguaggi attualmente installati\n" + +#: createlang.c:305 +msgid " -L, --pglib=DIRECTORY find language interpreter file in DIRECTORY\n" +msgstr " -L, --pglib=CARTELLA cerca il file di interpretazione linguaggio in CARTELLA\n" + +#: clusterdb.c:245 +#: createlang.c:306 +#: createuser.c:256 +#: dropdb.c:153 +#: droplang.c:286 +#: dropuser.c:153 +#: vacuumdb.c:274 +msgid " -h, --host=HOSTNAME database server host or socket directory\n" +msgstr " -h, --host=NOME_HOST indirizzo database o directory socket\n" + +#: clusterdb.c:246 +#: createlang.c:307 +#: createuser.c:257 +#: dropdb.c:154 +#: droplang.c:287 +#: dropuser.c:154 +#: vacuumdb.c:275 +msgid " -p, --port=PORT database server port\n" +msgstr " -p, --port=PORTA porta del server database\n" + +#: clusterdb.c:247 +#: createlang.c:308 +#: dropdb.c:155 +#: droplang.c:288 +#: vacuumdb.c:276 +msgid " -U, --username=USERNAME user name to connect as\n" +msgstr " -U, --username=UTENTE nome utente da utilizzare per la connessione\n" + +#: clusterdb.c:248 +#: createlang.c:309 +#: dropdb.c:156 +#: droplang.c:289 +#: vacuumdb.c:277 +msgid " -W, --password prompt for password\n" +msgstr " -W, --password richiedi una password\n" + +#: clusterdb.c:242 +#: createlang.c:310 +#: createuser.c:253 +#: dropdb.c:157 +#: droplang.c:290 +#: dropuser.c:157 +msgid " --help show this help, then exit\n" +msgstr " --help mostra questo aiuto e poi esci\n" + +#: clusterdb.c:243 +#: createlang.c:311 +#: createuser.c:254 +#: dropdb.c:158 +#: droplang.c:291 +#: dropuser.c:158 +msgid " --version output version information, then exit\n" +msgstr " --version mostra informazioni sulla versione, poi esci\n" + +#: createuser.c:142 +#, c-format +msgid "%s: user ID must be a positive number\n" +msgstr "%s: ID utente deve essere un numero positivo\n" + +#: createuser.c:148 +msgid "Enter name of user to add: " +msgstr "Inserisci il nome dell'utente da aggiungere:" + +#: createuser.c:155 +msgid "Enter password for new user: " +msgstr "Inserisci la password per il nuovo utente:" + +#: createuser.c:156 +msgid "Enter it again: " +msgstr "Conferma password:" + +#: createuser.c:159 +msgid "Passwords didn't match.\n" +msgstr "Le password non corrispondono. \n" + +#: createuser.c:170 +msgid "Shall the new user be allowed to create databases? (y/n) " +msgstr "Il nuovo utente può creare database? (s/n)" + +#: createuser.c:181 +msgid "Shall the new user be allowed to create more new users? (y/n) " +msgstr "Il nuovo utente può creare altri utenti? (s/n)" + +#: createuser.c:220 +#, c-format +msgid "%s: creation of new user failed: %s" +msgstr "%s: creazione del nuovo utente fallita: %s" + +#: createuser.c:239 +#, c-format +msgid "" +"%s creates a new PostgreSQL user.\n" +"\n" +msgstr "" +"%s crea un nuovo utente PostgreSQL.\n" +"\n" + +#: createuser.c:241 +#: dropuser.c:148 +#, c-format +msgid " %s [OPTION]... [USERNAME]\n" +msgstr " %s [OPZIONI]... [NOME_UTENTE]\n" + +#: createuser.c:243 +msgid " -a, --adduser user can add new users\n" +msgstr " -a, --adduser l'utente può creare altri utenti\n" + +#: createuser.c:244 +msgid " -A, --no-adduser user cannot add new users\n" +msgstr " -A, --no-adduser l'utente non può creare utenti\n" + +#: createuser.c:245 +msgid " -d, --createdb user can create new databases\n" +msgstr " -d, --createdb l'utente può creare database\n" + +#: createuser.c:246 +msgid " -D, --no-createdb user cannot create databases\n" +msgstr " -D, --no-createdb l'utente non può creare database\n" + +#: createuser.c:247 +msgid " -P, --pwprompt assign a password to new user\n" +msgstr " -P, --pwprompt assegna una password al nuovo utente\n" + +#: createuser.c:248 +msgid " -E, --encrypted encrypt stored password\n" +msgstr " -E, --encrypted cifra la password salvata\n" + +#: createuser.c:249 +msgid " -N, --unencrypted do not encrypt stored password\n" +msgstr " -N, --unencrypted non cifrare la password salvata\n" + +#: createuser.c:250 +msgid " -i, --sysid=SYSID select sysid for new user\n" +msgstr " -i, --sysid=SYSID seleziona un sysid per il nuovo utente\n" + +#: clusterdb.c:241 +#: createuser.c:252 +#: dropdb.c:152 +#: dropuser.c:152 +msgid " -q, --quiet don't write any messages\n" +msgstr " -q, --quiet non stampare messaggi\n" + +#: createuser.c:258 +msgid " -U, --username=USERNAME user name to connect as (not the one to create)\n" +msgstr " -U, --username=UTENTE nome utente con cui collegarsi (non quello da creare)\n" + +#: createuser.c:259 +#: dropuser.c:156 +msgid " -W, --password prompt for password to connect\n" +msgstr " -W, --password richiedi una password per connettersi\n" + +#: createuser.c:260 +msgid "" +"\n" +"If one of -a, -A, -d, -D, and USERNAME is not specified, you will\n" +"be prompted interactively.\n" +msgstr "" +"\n" +"Se uno tra -a, -A, -d, -D ed UTENTE non è specificato, ti sarà richesto interattivamente.\n" + +#: dropdb.c:92 +#, c-format +msgid "%s: missing required argument database name\n" +msgstr "%s: parametro mancante, nome del database\n" + +#: dropdb.c:109 +#, c-format +msgid "Database \"%s\" will be permanently removed.\n" +msgstr "Il database \"%s\" sarà eliminato definitivamente.\n" + +#: dropdb.c:110 +#: dropuser.c:111 +msgid "Are you sure? (y/n) " +msgstr "Sei sicuro? (s/n)" + +#: dropdb.c:127 +#, c-format +msgid "%s: database removal failed: %s" +msgstr "%s: eliminazione database fallita: %s" + +#: dropdb.c:146 +#, c-format +msgid "" +"%s removes a PostgreSQL database.\n" +"\n" +msgstr "" +"%s elimina un database PostgreSQL.\n" +"\n" + +#: dropdb.c:148 +#, c-format +msgid " %s [OPTION]... DBNAME\n" +msgstr " %s [OPZIONE]... NOME_DB\n" + +#: dropdb.c:151 +#: dropuser.c:151 +msgid " -i, --interactive prompt before deleting anything\n" +msgstr " -i, --interactive chiedi conferma prima di eseguire un operazione\n" + +#: droplang.c:176 +#, c-format +msgid "%s: language \"%s\" is not installed in database \"%s\"\n" +msgstr "%s: linguaggio \"%s\" non installato nel database \"%s\"\n" + +#: droplang.c:193 +#, c-format +msgid "%s: still %s functions declared in language \"%s\"; language not removed\n" +msgstr "%s: ancora %s funzioni dichiarate nel linguaggio \"%s\"; linguaggio non eliminato\n" + +#: droplang.c:265 +#, c-format +msgid "%s: language removal failed: %s" +msgstr "%s: eliminazione linguaggio fallita: %s" + +#: droplang.c:279 +#, c-format +msgid "" +"%s removes a procedural language from a database.\n" +"\n" +msgstr "" +"%s elimina un linguaggio procedurale da un database.\n" +"\n" + +#: droplang.c:283 +msgid " -d, --dbname=DBNAME database from which to remove the language\n" +msgstr " -d, --dbname=NOME_DB database dal quale eliminare il linguaggio\n" + +#: dropuser.c:104 +msgid "Enter name of user to drop: " +msgstr "Inserisci il nome dell'utente da eliminare:" + +#: dropuser.c:110 +#, c-format +msgid "User \"%s\" will be permanently removed.\n" +msgstr "L'utente \"%s\" sarà permanentemente eliminato.\n" + +#: dropuser.c:127 +#, c-format +msgid "%s: removal of user \"%s\" failed: %s" +msgstr "%s: eliminazione dell'utente \"%s\" fallita: %s" + +#: dropuser.c:146 +#, c-format +msgid "" +"%s removes a PostgreSQL user.\n" +"\n" +msgstr "" +"%s elimina un utente PostgreSQL.\n" +"\n" + +#: dropuser.c:155 +msgid " -U, --username=USERNAME user name to connect as (not the one to drop)\n" +msgstr " -U, --username=UTENTE nome utente con cui collegarsi (non quello da eliminare)\n" + +#: clusterdb.c:118 +#, c-format +msgid "%s: cannot cluster all databases and a specific one at the same time\n" +msgstr "%s: impossibile riordinare tutti i database ed uno specifico nello stesso momento\n" + +#: clusterdb.c:124 +#, c-format +msgid "%s: cannot cluster a specific table in all databases\n" +msgstr "%s: impossibile riordinare una tabella specifica in tutti i database\n" + +#: clusterdb.c:180 +#, c-format +msgid "%s: clustering of table \"%s\" in database \"%s\" failed: %s" +msgstr "%s: il riordino della tabella \"%s\" nel database \"%s\" è fallito: %s" + +#: clusterdb.c:183 +#, c-format +msgid "%s: clustering of database \"%s\" failed: %s" +msgstr "%s: il riordino del database \"%s\" è fallito: %s" + +#: clusterdb.c:219 +#, c-format +msgid "%s: clustering database \"%s\"\n" +msgstr "%s: riordino del database \"%s\"\n" + +#: clusterdb.c:233 +#, c-format +msgid "" +"%s clusters all previously clustered tables in a database.\n" +"\n" +msgstr "" +"%s riordina tutte le tabelle precedentemente riordinate nel database.\n" +"\n" + +#: clusterdb.c:235 +#: vacuumdb.c:261 +#, c-format +msgid " %s [OPTION]... [DBNAME]\n" +msgstr " %s [OPZIONI]... [NOME_DB]\n" + +#: clusterdb.c:237 +msgid " -a, --all cluster all databases\n" +msgstr " -a, --all riordina tutti i database\n" + +#: clusterdb.c:238 +msgid " -d, --dbname=DBNAME database to cluster\n" +msgstr " -d, --dbname=NOME_DB database da riordinare\n" + +#: clusterdb.c:239 +msgid " -t, --table=TABLE cluster specific table only\n" +msgstr " -t, --table=TABELLA riordina solo una tabella\n" + +#: clusterdb.c:249 +msgid "" +"\n" +"Read the description of the SQL command CLUSTER for details.\n" +msgstr "" +"\n" +"Consulta la descrizione del comando SQL CLUSTER per maggiori informazioni.\n" + +#: vacuumdb.c:135 +#, c-format +msgid "%s: cannot vacuum all databases and a specific one at the same time\n" +msgstr "%s: impossibile effettuare la pulizia di tutti i database e di uno in particolare nello stesso momento\n" + +#: vacuumdb.c:141 +#, c-format +msgid "%s: cannot vacuum a specific table in all databases\n" +msgstr "%s: impossibile effettuare la pulizia di una tabella specifica in tutti i database\n" + +#: vacuumdb.c:205 +#, c-format +msgid "%s: vacuuming of table \"%s\" in database \"%s\" failed: %s" +msgstr "%s: la pulizia della tabella \"%s\" nel database \"%s\" è fallito: %s" + +#: vacuumdb.c:208 +#, c-format +msgid "%s: vacuuming of database \"%s\" failed: %s" +msgstr "%s: la pulizia del database \"%s\" è fallito: %s" + +#: vacuumdb.c:245 +#, c-format +msgid "%s: vacuuming database \"%s\"\n" +msgstr "%s: pulizia del database \"%s\"\n" + +#: vacuumdb.c:259 +#, c-format +msgid "" +"%s cleans and analyzes a PostgreSQL database.\n" +"\n" +msgstr "" +"%s pulisce ed analizza un database PostgreSQL.\n" +"\n" + +#: vacuumdb.c:263 +msgid " -a, --all vacuum all databases\n" +msgstr " -a, --all pulisci tutti i database\n" + +#: vacuumdb.c:264 +msgid " -d, --dbname=DBNAME database to vacuum\n" +msgstr " -d, --dbname=NOME_DB database da pulire\n" + +#: vacuumdb.c:265 +msgid " -t, --table='TABLE[(COLUMNS)]' vacuum specific table only\n" +msgstr " -t, --table='TABELLA[(COLONNE)]' pulisci solamente una tabella specifica\n" + +#: vacuumdb.c:266 +msgid " -f, --full do full vacuuming\n" +msgstr " -f, --full esegui una pulizia completa\n" + +#: vacuumdb.c:267 +msgid " -z, --analyze update optimizer hints\n" +msgstr " -z, --analyze aggiorna i suggerimenti per l'ottimizzazione\n" + +#: vacuumdb.c:268 +msgid " -e, --echo show the commands being sent to the server\n" +msgstr " -e, --echo mostra i comandi inviati al server\n" + +#: vacuumdb.c:269 +msgid " -q, --quiet don't write any messages\n" +msgstr " -q, --quiet non stampare alcun messaggio\n" + +#: vacuumdb.c:270 +msgid " -v, --verbose write a lot of output\n" +msgstr " -v, --verbose mostra molti messaggi\n" + +#: vacuumdb.c:271 +msgid " --help show this help, then exit\n" +msgstr " --help mostra questi aiuti ed esci\n" + +#: vacuumdb.c:272 +msgid " --version output version information, then exit\n" +msgstr " --version mostra informazioni sulla versione e poi esci\n" + +#: vacuumdb.c:278 +msgid "" +"\n" +"Read the description of the SQL command VACUUM for details.\n" +msgstr "" +"\n" +"Consulta la descrizione del comando SQL VACUUM per maggiori informazioni.\n" + +#: common.c:86 +#: common.c:112 +msgid "Password: " +msgstr "Password: " + +#: common.c:99 +#, c-format +msgid "%s: could not connect to database %s\n" +msgstr "%s: impossibile connettersi al database %s\n" + +#: common.c:122 +#, c-format +msgid "%s: could not connect to database %s: %s" +msgstr "%s: impossibile connettersi al database %s: %s" + +#: common.c:146 +#, c-format +msgid "%s: query failed: %s" +msgstr "%s: query fallita: %s" + +#: common.c:147 +#, c-format +msgid "%s: query was: %s\n" +msgstr "%s: query eseguita: %s\n" + +#. translator: Make sure the (y/n) prompts match the translation of this. +#: common.c:161 +msgid "y" +msgstr "s" + +#. translator: Make sure the (y/n) prompts match the translation of this. +#: common.c:163 +msgid "n" +msgstr "n" + diff --git a/src/interfaces/libpq/po/zh_CN.po b/src/interfaces/libpq/po/zh_CN.po index bac57db059..dcfd89a71d 100644 --- a/src/interfaces/libpq/po/zh_CN.po +++ b/src/interfaces/libpq/po/zh_CN.po @@ -1,7 +1,7 @@ -# simplified Chinese translation file for libpq -# Bao Wei , 2002 +# simplified Chinese translation file for libpq +# Bao Wei , 2002 # -# $PostgreSQL: pgsql/src/interfaces/libpq/po/zh_CN.po,v 1.8 2005/01/06 09:07:17 petere Exp $ +# $PostgreSQL: pgsql/src/interfaces/libpq/po/zh_CN.po,v 1.9 2006/01/01 10:13:56 neilc Exp $ # msgid "" msgstr "" @@ -15,75 +15,75 @@ msgstr "" "Content-Type: text/plain; charset=GB2312\n" "Content-Transfer-Encoding: 8bit\n" -# fe-auth.c:232 +# fe-auth.c:232 #: fe-auth.c:232 #, c-format msgid "Kerberos 4 error: %s\n" msgstr "Kerberos 4 ´íÎó: %s\n" -# fe-auth.c:395 +# fe-auth.c:395 #: fe-auth.c:394 #, c-format msgid "could not set socket to blocking mode: %s\n" msgstr "ÎÞ·¨½«Ì×½Ó×ÖÉèÖÃΪ×èÈûģʽ: %s\n" -# fe-auth.c:412 fe-auth.c:416 +# fe-auth.c:412 fe-auth.c:416 #: fe-auth.c:411 fe-auth.c:415 #, c-format msgid "Kerberos 5 authentication rejected: %*s\n" msgstr "kerberos 5 ÈÏÖ¤¾Ü¾ø: %*s\n" -# fe-auth.c:440 +# fe-auth.c:440 #: fe-auth.c:441 #, c-format msgid "could not restore non-blocking mode on socket: %s\n" msgstr "ÎÞ·¨ÔÚÌ×½Ó×Ö: %s Éϻָ´·Ç×èÈûģʽ\n" -# fe-auth.c:503 +# fe-auth.c:503 #: fe-auth.c:508 msgid "SCM_CRED authentication method not supported\n" msgstr "²»Ö§³Ö SCM_CRED ÈÏÖ¤·½Ê½\n" -# fe-connect.c:2427 fe-connect.c:2436 fe-connect.c:2933 fe-exec.c:1284 -# fe-lobj.c:536 +# fe-connect.c:2427 fe-connect.c:2436 fe-connect.c:2933 fe-exec.c:1284 +# fe-lobj.c:536 #: fe-auth.c:530 fe-connect.c:1410 fe-connect.c:2625 fe-connect.c:2634 #: fe-connect.c:3213 fe-lobj.c:556 fe-protocol2.c:1007 fe-protocol3.c:958 msgid "out of memory\n" msgstr "ÄÚ´æÓþ¡\n" -# fe-auth.c:589 +# fe-auth.c:589 #: fe-auth.c:600 msgid "Kerberos 4 authentication failed\n" msgstr "Kerberos 4 ÈÏ֤ʧ°Ü\n" -# fe-auth.c:595 +# fe-auth.c:595 #: fe-auth.c:608 msgid "Kerberos 4 authentication not supported\n" msgstr "²»Ö§³Ö Kerberos 4 ÈÏÖ¤\n" -# fe-auth.c:606 +# fe-auth.c:606 #: fe-auth.c:619 msgid "Kerberos 5 authentication failed\n" msgstr "Kerberos 5 ÈÏ֤ʧ°Ü\n" -# fe-auth.c:612 +# fe-auth.c:612 #: fe-auth.c:627 msgid "Kerberos 5 authentication not supported\n" msgstr "²»Ö§³Ö Kerberos 5 ÈÏÖ¤\n" -# fe-auth.c:640 +# fe-auth.c:640 #: fe-auth.c:655 #, c-format msgid "authentication method %u not supported\n" msgstr "²»Ö§³Ö %u ÈÏÖ¤·½Ê½\n" -# fe-auth.c:677 +# fe-auth.c:677 #: fe-auth.c:692 #, c-format msgid "invalid authentication service name \"%s\", ignored\n" msgstr "ºöÂÔ·Ç·¨ÈÏÖ¤·þÎñÃû \"%s\"\n" -# fe-auth.c:734 +# fe-auth.c:734 #: fe-auth.c:764 #, c-format msgid "fe_getauthname: invalid authentication system: %d\n" @@ -99,13 +99,13 @@ msgstr " msgid "sslmode value \"%s\" invalid when SSL support is not compiled in\n" msgstr "ÎÞЧµÄ sslmode Öµ \"%s\" µ±Ã»ÓÐ°Ñ SSL Ö§³Ö±àÒë½øÀ´Ê±\n" -# fe-connect.c:732 +# fe-connect.c:732 #: fe-connect.c:799 #, c-format msgid "could not set socket to TCP no delay mode: %s\n" msgstr "ÎÞ·¨½«Ì×½Ó×ÖÉèÖÃΪ TCP ÎÞÑÓ³Ùģʽ: %s\n" -# fe-connect.c:752 +# fe-connect.c:752 #: fe-connect.c:830 #, c-format msgid "" @@ -117,7 +117,7 @@ msgstr "" "\t·þÎñÆ÷ÊÇ·ñÔÚ±¾µØÔËÐв¢ÇÒÔÚ Unix ÓòÌ×½Ó×Ö\n" "\t\"%s\"ÉÏ×¼±¸½ÓÊÜÁª½Ó?\n" -# fe-connect.c:761 +# fe-connect.c:761 #: fe-connect.c:842 #, c-format msgid "" @@ -129,122 +129,122 @@ msgstr "" "\t·þÎñÆ÷ÊÇ·ñÔÚÖ÷»ú \"%s\" ÉÏÔËÐв¢ÇÒ×¼±¸½ÓÊÜÔڶ˿Ú\n" "%s É쵀 TCP/IP Áª½Ó?\n" -# fe-misc.c:702 +# fe-misc.c:702 #: fe-connect.c:926 #, c-format msgid "could not translate host name \"%s\" to address: %s\n" msgstr "ÎÞ·¨½âÊÍÖ÷»úÃû \"%s\" µ½µØÖ·: %s\n" -# fe-misc.c:702 +# fe-misc.c:702 #: fe-connect.c:930 #, c-format msgid "could not translate Unix-domain socket path \"%s\" to address: %s\n" msgstr "ÎÞ·¨½âÊÍ Unix-domian Ì×½Ó×Ö·¾¶ \"%s\" µ½µØÖ·: %s\n" -# fe-connect.c:1232 +# fe-connect.c:1232 #: fe-connect.c:1134 msgid "invalid connection state, probably indicative of memory corruption\n" msgstr "ÎÞЧµÄÁª½Ó״̬, ¿ÉÄÜÊÇ´æ´¢Æ÷Êý¾Ý±»ÆÆ»µµÄ±êÖ¾\n" -# fe-connect.c:891 +# fe-connect.c:891 #: fe-connect.c:1177 #, c-format msgid "could not create socket: %s\n" msgstr "ÎÞ·¨´´½¨Ì×½Ó×Ö: %s\n" -# fe-connect.c:708 +# fe-connect.c:708 #: fe-connect.c:1200 #, c-format msgid "could not set socket to non-blocking mode: %s\n" msgstr "ÎÞ·¨½«Ì×½Ó×ÖÉèÖÃΪ·Ç×èÈûģʽ: %s\n" -# fe-auth.c:395 +# fe-auth.c:395 #: fe-connect.c:1212 #, c-format msgid "could not set socket to close-on-exec mode: %s\n" msgstr "ÎÞ·¨½«Ì×½Ó×ÖÉèÖÃΪִÐÐʱ¹Ø±Õ (close-on-exec) ģʽ: %s\n" -# fe-connect.c:1263 +# fe-connect.c:1263 #: fe-connect.c:1304 #, c-format msgid "could not get socket error status: %s\n" msgstr "ÎÞ·¨»ñÈ¡Ì×½Ó×Ö´íÎó״̬: %s\n" -# fe-connect.c:1283 +# fe-connect.c:1283 #: fe-connect.c:1343 #, c-format msgid "could not get client address from socket: %s\n" msgstr "ÎÞ·¨´ÓÌ×½Ó×Ö»ñÈ¡¿Í»§¶ËµØÖ·: %s\n" -# fe-connect.c:959 +# fe-connect.c:959 #: fe-connect.c:1388 #, c-format msgid "could not send SSL negotiation packet: %s\n" msgstr "ÎÞ·¨·¢ËÍ SSL ÎÕÊÖ°ü: %s\n" -# fe-connect.c:1322 +# fe-connect.c:1322 #: fe-connect.c:1423 #, c-format msgid "could not send startup packet: %s\n" msgstr "ÎÞ·¨·¢ËÍÆô¶¯°ü: %s\n" -# fe-connect.c:972 +# fe-connect.c:972 #: fe-connect.c:1463 #, c-format msgid "could not receive server response to SSL negotiation packet: %s\n" msgstr "ÎÞ·¨ÊÕµ½·þÎñÆ÷¶Ô SSL ÎÕÊÖ°üµÄÏìÓ¦: %s\n" -# fe-connect.c:1010 +# fe-connect.c:1010 #: fe-connect.c:1482 fe-connect.c:1499 msgid "server does not support SSL, but SSL was required\n" msgstr "·þÎñÆ÷²»Ö§³Ö SSL, µ«ÊÇÒªÇóʹÓà SSL\n" -# fe-connect.c:1001 +# fe-connect.c:1001 #: fe-connect.c:1515 #, c-format msgid "received invalid response to SSL negotiation: %c\n" msgstr "ÊÕµ½¶Ô SSL ÎÕÊÖµÄÎÞЧÏìÓ¦: %c\n" -# fe-connect.c:1378 +# fe-connect.c:1378 #: fe-connect.c:1572 fe-connect.c:1604 #, c-format msgid "expected authentication request from server, but received %c\n" msgstr "ÆÚ´ýÀ´×Ô·þÎñÆ÷µÄÈÏÖ¤ÇëÇó, È´ÊÕµ½ %c\n" -# fe-connect.c:1490 +# fe-connect.c:1490 #: fe-connect.c:1840 msgid "unexpected message from server during startup\n" msgstr "Æô¶¯¹ý³ÌÖÐÊÕµ½À´×Ô·þÎñÆ÷µÄ·ÇÔ¤ÆÚÐÅÏ¢\n" -# fe-connect.c:1549 +# fe-connect.c:1549 #: fe-connect.c:1910 #, c-format msgid "invalid connection state %c, probably indicative of memory corruption\n" msgstr "ÎÞЧµÄÁª½Ó״̬ %c, ¿ÉÄÜÊÇ´æ´¢Æ÷Êý¾Ý±»ÆÆ»µµÄ±êÖ¾\n" -# fe-connect.c:2475 +# fe-connect.c:2475 #: fe-connect.c:2673 #, c-format msgid "missing \"=\" after \"%s\" in connection info string\n" msgstr "ÔÚÁª½ÓÐÅÏ¢×Ö´®ÀïµÄ \"%s\" ºóÃæȱÉÙ \"=\"\n" -# fe-connect.c:2524 +# fe-connect.c:2524 #: fe-connect.c:2722 msgid "unterminated quoted string in connection info string\n" msgstr "Áª½ÓÐÅÏ¢×Ö´®ÖÐδ½áÊøµÄÒýºÅ×Ö´®\n" -# fe-connect.c:2558 +# fe-connect.c:2558 #: fe-connect.c:2756 #, c-format msgid "invalid connection option \"%s\"\n" msgstr "·Ç·¨Áª½ÓÑ¡Ïî \"%s\"\n" -# fe-connect.c:2744 +# fe-connect.c:2744 #: fe-connect.c:2978 msgid "connection pointer is NULL\n" msgstr "Áª½ÓÖ¸ÕëÊÇ NULL\n" -# fe-connect.c:2953 +# fe-connect.c:2953 #: fe-connect.c:3235 #, c-format msgid "" @@ -256,12 +256,12 @@ msgstr " msgid "NOTICE" msgstr "×¢Òâ" -# fe-exec.c:737 +# fe-exec.c:737 #: fe-exec.c:648 fe-exec.c:700 fe-exec.c:740 msgid "command string is a null pointer\n" msgstr "ÃüÁî×Ö´®ÊÇÒ»¸ö¿ÕÖ¸Õë\n" -# fe-exec.c:737 +# fe-exec.c:737 #: fe-exec.c:733 fe-exec.c:823 msgid "statement name is a null pointer\n" msgstr "ÉùÃ÷Ãû×ÖÊÇÒ»¸ö¿ÕÖ¸Õë\n" @@ -270,17 +270,17 @@ msgstr " msgid "function requires at least protocol version 3.0\n" msgstr "º¯ÊýÖÁÉÙÐèÒª 3.0 °æ±¾µÄЭÒé\n" -# fe-exec.c:745 +# fe-exec.c:745 #: fe-exec.c:854 msgid "no connection to the server\n" msgstr "ûÓе½·þÎñÆ÷µÄÁª½Ó\n" -# fe-exec.c:752 +# fe-exec.c:752 #: fe-exec.c:861 msgid "another command is already in progress\n" msgstr "ÒѾ­ÓÐÁíÍâÒ»ÌõÃüÁîÔÚ´¦Àí\n" -# fe-exec.c:1371 +# fe-exec.c:1371 #: fe-exec.c:1199 #, c-format msgid "unexpected asyncStatus: %d\n" @@ -290,149 +290,149 @@ msgstr " msgid "COPY terminated by new PQexec" msgstr "COPY ±»Ò»¸öÐ嵀 PQexec ÖÕÖ¹" -# fe-exec.c:1421 +# fe-exec.c:1421 #: fe-exec.c:1334 msgid "COPY IN state must be terminated first\n" msgstr "COPY IN ״̬±ØÐëÏȽáÊø\n" -# fe-exec.c:1421 +# fe-exec.c:1421 #: fe-exec.c:1354 msgid "COPY OUT state must be terminated first\n" msgstr "COPY OUT ״̬±ØÐëÏȽáÊø\n" -# fe-exec.c:1780 +# fe-exec.c:1780 #: fe-exec.c:1464 fe-exec.c:1529 fe-exec.c:1614 fe-protocol2.c:1153 #: fe-protocol3.c:1115 msgid "no COPY in progress\n" msgstr "ûÓÐÕýÔÚ´¦ÀíµÄ COPY\n" -# fe-exec.c:1884 +# fe-exec.c:1884 #: fe-exec.c:1806 msgid "connection in wrong state\n" msgstr "Áª½Ó´¦ÓÚ´íÎó״̬\n" -# fe-exec.c:2055 +# fe-exec.c:2055 #: fe-exec.c:1837 msgid "invalid ExecStatusType code" msgstr "·Ç·¨ ExecStatusType ´úÂë" -# fe-exec.c:2108 fe-exec.c:2141 +# fe-exec.c:2108 fe-exec.c:2141 #: fe-exec.c:1901 fe-exec.c:1924 #, c-format msgid "column number %d is out of range 0..%d" msgstr "ÁкÅÂë %d ³¬³öÁË·¶Î§ 0..%d" -# fe-exec.c:2130 +# fe-exec.c:2130 #: fe-exec.c:1917 #, c-format msgid "row number %d is out of range 0..%d" msgstr "ÐкÅÂë %d ³¬³öÁË·¶Î§ 0..%d" -# fe-exec.c:2325 +# fe-exec.c:2325 #: fe-exec.c:2199 #, c-format msgid "could not interpret result from server: %s" msgstr "ÎÞ·¨½âÊÍÀ´×Ô·þÎñÆ÷µÄ½á¹û: %s" -# fe-lobj.c:400 fe-lobj.c:483 +# fe-lobj.c:400 fe-lobj.c:483 #: fe-lobj.c:410 fe-lobj.c:495 #, c-format msgid "could not open file \"%s\": %s\n" msgstr "ÎÞ·¨´ò¿ªÎļþ \"%s\": %s\n" -# fe-lobj.c:412 +# fe-lobj.c:412 #: fe-lobj.c:422 #, c-format msgid "could not create large object for file \"%s\"\n" msgstr "ÎÞ·¨ÎªÎļþ \"%s\" ´´½¨´ó¶ÔÏó\n" -# fe-lobj.c:422 fe-lobj.c:472 +# fe-lobj.c:422 fe-lobj.c:472 #: fe-lobj.c:432 fe-lobj.c:482 #, c-format msgid "could not open large object %u\n" msgstr "ÎÞ·¨´ò¿ª´ó¶ÔÏó %u\n" -# fe-lobj.c:437 +# fe-lobj.c:437 #: fe-lobj.c:447 #, c-format msgid "error while reading file \"%s\"\n" msgstr "¶ÁÈ¡Îļþ \"%s\" ʱ³ö´í\n" -# fe-lobj.c:498 +# fe-lobj.c:498 #: fe-lobj.c:510 fe-lobj.c:523 #, c-format msgid "error while writing to file \"%s\"\n" msgstr "дÈëÎļþ \"%s\" ʱ³ö´í\n" -# fe-lobj.c:564 +# fe-lobj.c:564 #: fe-lobj.c:601 msgid "query to initialize large object functions did not return data\n" msgstr "³õʼ»¯´ó¶ÔÏóº¯ÊýµÄ²éѯûÓзµ»ØÊý¾Ý\n" -# fe-lobj.c:602 +# fe-lobj.c:602 #: fe-lobj.c:639 msgid "cannot determine OID of function lo_open\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_open µÄ OID\n" -# fe-lobj.c:609 +# fe-lobj.c:609 #: fe-lobj.c:646 msgid "cannot determine OID of function lo_close\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_close µÄ OID\n" -# fe-lobj.c:616 +# fe-lobj.c:616 #: fe-lobj.c:653 msgid "cannot determine OID of function lo_creat\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_creat µÄ OID\n" -# fe-lobj.c:623 +# fe-lobj.c:623 #: fe-lobj.c:660 msgid "cannot determine OID of function lo_unlink\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_unlink µÄ OID\n" -# fe-lobj.c:630 +# fe-lobj.c:630 #: fe-lobj.c:667 msgid "cannot determine OID of function lo_lseek\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_lseek µÄ OID\n" -# fe-lobj.c:637 +# fe-lobj.c:637 #: fe-lobj.c:674 msgid "cannot determine OID of function lo_tell\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lo_tell µÄ OID\n" -# fe-lobj.c:644 +# fe-lobj.c:644 #: fe-lobj.c:681 msgid "cannot determine OID of function loread\n" msgstr "ÎÞ·¨ÅжϺ¯Êý loread µÄ OID\n" -# fe-lobj.c:651 +# fe-lobj.c:651 #: fe-lobj.c:688 msgid "cannot determine OID of function lowrite\n" msgstr "ÎÞ·¨ÅжϺ¯Êý lowrite µÄ OID\n" -# fe-misc.c:303 +# fe-misc.c:303 #: fe-misc.c:228 #, c-format msgid "integer of size %lu not supported by pqGetInt" msgstr "pgGetInt ²»Ö§³Ö´óСΪ %lu µÄÕûÊý" -# fe-misc.c:341 +# fe-misc.c:341 #: fe-misc.c:264 #, c-format msgid "integer of size %lu not supported by pqPutInt" msgstr "pgPutInt ²»Ö§³Ö´óСΪ %lu µÄÕûÊý" -# fe-misc.c:450 fe-misc.c:642 fe-misc.c:798 +# fe-misc.c:450 fe-misc.c:642 fe-misc.c:798 #: fe-misc.c:544 fe-misc.c:748 msgid "connection not open\n" msgstr "Áª½Óδ´ò¿ª\n" -# fe-misc.c:515 fe-misc.c:595 +# fe-misc.c:515 fe-misc.c:595 #: fe-misc.c:610 fe-misc.c:701 #, c-format msgid "could not receive data from server: %s\n" msgstr "ÎÞ·¨´Ó·þÎñÆ÷½ÓÊÕÊý¾Ý: %s\n" -# fe-misc.c:612 fe-misc.c:686 +# fe-misc.c:612 fe-misc.c:686 #: fe-misc.c:718 fe-misc.c:786 msgid "" "server closed the connection unexpectedly\n" @@ -443,7 +443,7 @@ msgstr "" "\tÕâÖÖÏÖÏóͨ³£Òâζ×Å·þÎñÆ÷ÔÚ´¦ÀíÇëÇó֮ǰ\n" "»òÕßÕýÔÚ´¦ÀíÇëÇóµÄʱºòÒâÍâÖÐÖ¹\n" -# fe-misc.c:702 +# fe-misc.c:702 #: fe-misc.c:803 #, c-format msgid "could not send data to server: %s\n" @@ -453,24 +453,24 @@ msgstr " msgid "timeout expired\n" msgstr "³¬Ê±Âú\n" -# fe-misc.c:450 fe-misc.c:642 fe-misc.c:798 +# fe-misc.c:450 fe-misc.c:642 fe-misc.c:798 #: fe-misc.c:968 msgid "socket not open\n" msgstr "Ì×½Ó×Öδ´ò¿ª\n" -# fe-misc.c:389 fe-misc.c:423 fe-misc.c:838 +# fe-misc.c:389 fe-misc.c:423 fe-misc.c:838 #: fe-misc.c:991 #, c-format msgid "select() failed: %s\n" msgstr "select() ʧ°Ü: %s\n" -# fe-connect.c:1549 +# fe-connect.c:1549 #: fe-protocol2.c:91 #, c-format msgid "invalid setenv state %c, probably indicative of memory corruption\n" msgstr "ÎÞЧµÄ setenv ״̬ %c, ¿ÉÄÜÊÇÄÚ´æ±»ÆÆ»µ\n" -# fe-connect.c:1549 +# fe-connect.c:1549 #: fe-protocol2.c:333 #, c-format msgid "invalid state %c, probably indicative of memory corruption\n" @@ -502,14 +502,14 @@ msgstr "" "server sent binary data (\"B\" message) without prior row description (\"T\" " "message)" -# fe-connect.c:1378 +# fe-connect.c:1378 #: fe-protocol2.c:548 fe-protocol3.c:344 #, c-format msgid "unexpected response from server; first received character was \"%c\"\n" msgstr "À´×Ô·þÎñÆ÷ÒâÍâµÄ»ØÖ´, µÚÒ»¸öÊÕµ½µÄ×Ö·ûÊÇ \"%c\"\n" -# fe-connect.c:2427 fe-connect.c:2436 fe-connect.c:2933 fe-exec.c:1284 -# fe-lobj.c:536 +# fe-connect.c:2427 fe-connect.c:2436 fe-connect.c:2933 fe-exec.c:1284 +# fe-lobj.c:536 #: fe-protocol2.c:760 fe-protocol3.c:577 msgid "out of memory for query result\n" msgstr "Ϊ²éѯ½á¹ûÄÚ´æÓþ¡\n" @@ -608,7 +608,7 @@ msgstr "SSL SYSCALL msgid "SSL SYSCALL error: EOF detected\n" msgstr "SSL SYSCALL ´íÎó: ·¢ÏÖ½áÊø·û\n" -# fe-auth.c:232 +# fe-auth.c:232 #: fe-secure.c:359 fe-secure.c:454 fe-secure.c:1080 #, c-format msgid "SSL error: %s\n" @@ -619,13 +619,13 @@ msgstr "SSL msgid "unrecognized SSL error code: %d\n" msgstr "δ֪µÄ SSL ´íÎóÂë: %d\n" -# fe-lobj.c:498 +# fe-lobj.c:498 #: fe-secure.c:533 #, c-format msgid "error querying socket: %s\n" msgstr "²éѯÌ×½Ó×Ö´íÎó: %s\n" -# fe-connect.c:1263 +# fe-connect.c:1263 #: fe-secure.c:561 #, c-format msgid "could not get information about host \"%s\": %s\n" @@ -645,18 +645,18 @@ msgstr " msgid "server common name \"%s\" does not resolve to peer address\n" msgstr "·þÎñÆ÷Ãû×Ö \"%s\" ²»ÄܽâÎöµ½¶Ô¶ËµØÖ·\n" -# fe-connect.c:1263 +# fe-connect.c:1263 #: fe-secure.c:791 msgid "could not get user information\n" msgstr "ÎÞ·¨»ñÈ¡Óû§ÐÅÏ¢\n" -# fe-lobj.c:400 fe-lobj.c:483 +# fe-lobj.c:400 fe-lobj.c:483 #: fe-secure.c:801 #, c-format msgid "could not open certificate file \"%s\": %s\n" msgstr "ÎÞ·¨´ò¿ªÖ¤ÊéÎļþ \"%s\": %s\n" -# fe-lobj.c:400 fe-lobj.c:483 +# fe-lobj.c:400 fe-lobj.c:483 #: fe-secure.c:810 #, c-format msgid "could not read certificate file \"%s\": %s\n" @@ -672,7 +672,7 @@ msgstr " msgid "private key file \"%s\" has wrong permissions\n" msgstr "˽ԿÎļþ \"%s\" ÓдíÎóµÄÐí¿É\n" -# fe-lobj.c:400 fe-lobj.c:483 +# fe-lobj.c:400 fe-lobj.c:483 #: fe-secure.c:839 #, c-format msgid "could not open private key file \"%s\": %s\n" @@ -683,7 +683,7 @@ msgstr " msgid "private key file \"%s\" changed during execution\n" msgstr "ÔÚÖ´Ðйý³ÌÖÐ˽ԿÎļþ \"%s\" ¸Ä±äÁË\n" -# fe-connect.c:891 +# fe-connect.c:891 #: fe-secure.c:855 #, c-format msgid "could not read private key file \"%s\": %s\n" @@ -699,7 +699,7 @@ msgstr "Ö¤ msgid "could not create SSL context: %s\n" msgstr "ÎÞ·¨´´½¨ SSL »·¾³: %s\n" -# fe-connect.c:891 +# fe-connect.c:891 #: fe-secure.c:996 #, c-format msgid "could not read root certificate file \"%s\": %s\n" -- 2.40.0