Michael Paquier [Sun, 27 Oct 2019 04:54:20 +0000 (13:54 +0900)]
Fix initialization of fake LSN for unlogged relations
9155580 has changed the value of the first fake LSN for unlogged
relations from 1 to FirstNormalUnloggedLSN (aka 1000), GiST requiring a
non-zero LSN on some pages to allow an interlocking logic to work, but
its value was still initialized to 1 at the beginning of recovery or
after running pg_resetwal. This fixes the initialization for both code
paths.
Tom Lane [Sat, 26 Oct 2019 16:30:41 +0000 (12:30 -0400)]
Doc: improve documentation of configuration settings that have units.
When we added the GUC units feature, we didn't make any great effort
to adjust the documentation of individual GUCs; they tended to still
say things like "this is the number of milliseconds that ...", even
though users might prefer to write some other units, and SHOW might
even show the value in other units. Commit 6c9fb69f2 made an effort
to improve this situation, but I thought it made things less readable
by injecting units information in mid-sentence. It also wasn't very
consistent, and did not touch all the GUCs that have units.
To improve matters, standardize on the phrasing "If this value is
specified without units, it is taken as <units>". Also, try to
standardize where this is mentioned, right before the specification
of the default. (In a couple of places, doing that would've required
more rewriting than seemed justified, so I wasn't 100% consistent
about that.) I also tried to use the phrases "amount of time",
"amount of memory", etc rather than describing the contents of GUCs
in other ways, as those were the majority usage in places that weren't
overcommitting to a particular unit. (I left "length of time" alone
in a couple of places, though.)
I failed to resist the temptation to copy-edit some awkward text, too.
Backpatch to v12, like 6c9fb69f2, mainly because v12 hasn't diverged
much from HEAD yet.
Tom Lane [Fri, 25 Oct 2019 19:22:40 +0000 (15:22 -0400)]
Avoid failure when selecting a namespace node in XMLTABLE.
It appears that libxml2 doesn't bother to set the "children" field of
an XML_NAMESPACE_DECL node to null; that field just contains garbage.
In v10 and v11, this can result in a crash in XMLTABLE(). The rewrite
done in commit 251cf2e27 fixed this, somewhat accidentally, in v12.
We're not going to back-patch 251cf2e27, however. The case apparently
doesn't have wide use, so rather than risk introducing other problems,
just add a safety check to throw an error.
Even though no bug manifests in v12/HEAD, add the relevant test case
there too, to prevent future regressions.
Tom Lane [Fri, 25 Oct 2019 16:17:41 +0000 (12:17 -0400)]
Get rid of useless/dangerous redefinition of bool in ECPG.
pgtypeslib_extern.h contained fallback definitions of "bool", "FALSE",
and "TRUE". The latter two are just plain unused, and have been for
awhile. The former came into play only if there wasn't a macro
definition of "bool", which is true only if we aren't using <stdbool.h>.
However, it then defined bool as "char"; since commit d26a810eb that
conflicts with c.h's desire to use "unsigned char". We'd missed seeing
any bad effects of that due to accidental header inclusion order choices,
but dddf4cdc3 exposed that it was problematic.
To fix, let's just get rid of these definitions. They should not be
needed because everyplace in Postgres should be relying on c.h to
provide a definition for type bool. (Note that despite its name,
pgtypeslib_extern.h isn't exposed to any outside code; we don't
install it.)
This doesn't fully resolve the issue, because ecpglib.h is doing
similar things, but that seems to require more thought to fix.
Back-patch to v12 where d26a810eb came in, to forestall any unpleasant
surprises from future back-patched bug fixes.
Michael Paquier [Fri, 25 Oct 2019 01:20:16 +0000 (10:20 +0900)]
Handle interrupts within a transaction context in REINDEX CONCURRENTLY
Phases 2 (building the new index) and 3 (validating the new index)
checked for interrupts outside a transaction context, having as
consequence to not release session-level locks taken on the parent
relation and the old and new indexes processed. This could for example
be triggered with statement_timeout and a bad timing, and would issue
confusing error messages when shutting down the session still holding
the locks (note that an assertion failure would be triggered first), on
top of more issues with concurrent sessions trying to take a lock that
would interfere with the SHARE UPDATE EXCLUSIVE locks hold here.
This moves all the interruption checks inside a transaction context.
Note that I have manually tested all interruptions to make sure that
invalid indexes can be cleaned up properly. Partition indexes still
have issues on their own with some missing dependency handling, which
will be dealt with in a follow-up patch.
Reported-by: Justin Pryzby
Author: Michael Paquier
Discussion: https://postgr.es/m/20191013025145.GC4475@telsasoft.com
Backpatch-through: 12
Michael Paquier [Wed, 23 Oct 2019 06:05:09 +0000 (15:05 +0900)]
Acquire properly session-level lock on new index in REINDEX CONCURRENTLY
In the first transaction run for REINDEX CONCURRENTLY, a thinko in the
existing logic caused two session locks to be taken on the old index,
causing the session lock on the newly-created index to be missed. This
made possible concurrent DDL commands (like ALTER INDEX) on the new
index while REINDEX CONCURRENTLY was processing from the point where the
first internal transaction committed.
This issue has been discovered while digging into another bug.
Author: Michael Paquier
Discussion: https://postgr.es/m/20191021074323.GB1869@paquier.xyz
Backpatch-through: 12
Michael Paquier [Wed, 23 Oct 2019 02:34:42 +0000 (11:34 +0900)]
Fix thinkos from 4f4061b for libpq integer parsing
A check was redundant. While on it, add an assertion to make sure that
the parsing routine is never called with a NULL input. All the code
paths currently calling the parsing routine are careful with NULL inputs
already, but future callers may forget that.
Reported-by: Peter Eisentraut, Lars Kanis
Discussion: https://postgr.es/m/ec64956b-4597-56b6-c3db-457d15250fe4@2ndquadrant.com
Backpatch-through: 12
Michael Paquier [Wed, 23 Oct 2019 01:25:46 +0000 (10:25 +0900)]
Clean up properly error_context_stack in autovacuum worker on exception
Any callback set would have no meaning in the context of an exception.
As an autovacuum worker exits quickly in this context, this could be
only an issue within EmitErrorReport(), where the elog hook is for
example called. That's unlikely to going to be a problem, but let's be
clean and consistent with other code paths handling exceptions. This is
present since 2909419, which introduced autovacuum.
Author: Ashwin Agrawal Reviewed-by: Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/CALfoeisM+_+dgmAdAOHAu0k-ZpEHHqSSG=GRf3pKJGm8OqWX0w@mail.gmail.com
Backpatch-through: 9.4
Tom Lane [Mon, 21 Oct 2019 18:18:01 +0000 (14:18 -0400)]
Deal with yet another issue related to "Norwegian (Bokmål)" locale.
It emerges that recent versions of Windows (at least 2016 Standard)
spell this locale name as "Norwegian Bokmål_Norway.1252", defeating
our mapping code that translates "Norwegian (Bokmål)_Norway" to
something that's all-ASCII (cf commits db29620d4 and aa1d2fc5e).
Add another mapping entry to handle this spelling.
Per bug #16068 from Robert Ford. Like the previous patches,
back-patch to all supported branches.
Tom Lane [Mon, 21 Oct 2019 17:52:25 +0000 (13:52 -0400)]
Use CFLAGS_SL while probing linkability of libperl.
On recent Red Hat platforms (at least RHEL 8 and Fedora 30, maybe older),
configure's probe for libperl failed if the user forces CFLAGS to be -O0.
This is because some code in perl's inline.h fails to be optimized away
at -O0, and said code doesn't work if compiled without -fPIC.
To fix, add CFLAGS_SL to the compile flags used during the libperl probe.
This is a better simulation of the way that plperl is built, anyway,
so it might forestall other issues in future.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
since people might want to build older branches on these platforms.
Tom Lane [Mon, 21 Oct 2019 16:32:35 +0000 (12:32 -0400)]
Select CFLAGS_SL at configure time, not in platform-specific Makefiles.
Move the platform-dependent logic that sets CFLAGS_SL from
src/makefiles/Makefile.foo to src/template/foo, so that the value
is determined at configure time and thus is available while running
configure's tests.
On a couple of platforms this might save a few microseconds of build
time by eliminating a test that make otherwise has to do over and over.
Otherwise it's pretty much a wash for build purposes; in particular,
this makes no difference to anyone who might be overriding CFLAGS_SL
via a make option.
This patch in itself does nothing with the value and thus should not
change any behavior, though you'll probably have to re-run configure
to get a correctly updated Makefile.global. We'll use the new
configure variable in a follow-on patch.
Per gripe from Kyotaro Horiguchi. Back-patch to all supported branches,
because the follow-on patch is a portability bug fix.
Etsuro Fujita [Mon, 21 Oct 2019 08:30:01 +0000 (17:30 +0900)]
Update obsolete comment.
Commit b52b7dc25, which moved code creating PartitionBoundInfo in
RelationBuildPartitionDesc() in partcache.c (relocated to partdesc.c
afterwards) to partbounds.c, should have updated this, but didn't.
We memorize all internal and empty leaf pages in the 1st vacuum stage for
gist indexes. They are used in the 2nd stage, to delete all the empty
pages. There was a memory context page_set_context for this purpose, but
we never used it.
Reported-by: Amit Kapila
Author: Dilip Kumar Reviewed-by: Amit Kapila
Backpatch-through: 12, where it got introduced
Discussion: https://postgr.es/m/CAA4eK1LGr+MN0xHZpJ2dfS8QNQ1a_aROKowZB+MPNep8FVtwAA@mail.gmail.com
Michael Paquier [Mon, 21 Oct 2019 02:39:28 +0000 (11:39 +0900)]
Fix error reporting of connect_timeout in libpq for value parsing
The logic was correctly detecting a parsing failure, but the parsing
error did not get reported back to the client properly.
Reported-by: Ed Morley
Author: Lars Kanis Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
Michael Paquier [Mon, 21 Oct 2019 02:17:43 +0000 (11:17 +0900)]
Fix parsing of integer values for connection parameters in libpq
Commit e7a2217 has introduced stricter checks for integer values in
connection parameters for libpq. However this failed to correctly check
after trailing whitespaces, while leading whitespaces were discarded per
the use of strtol(3). This fixes and refactors the parsing logic to
handle both cases consistently. Note that trying to restrict the use of
trailing whitespaces can easily break connection strings like in ECPG
regression tests (these have allowed me to catch the parsing bug with
connect_timeout).
Author: Michael Paquier Reviewed-by: Lars Kanis
Discussion: https://postgr.es/m/a9b4cbd7-4ecb-06b2-ebd7-1739bbff3217@greiz-reinsdorf.de
Backpatch-through: 12
Noah Misch [Sat, 19 Oct 2019 03:20:28 +0000 (20:20 -0700)]
For PowerPC instruction "addi", use constraint "b".
Without "b", a variant of the tas() code miscompiles on macOS 10.4.
This may also fix a compilation failure involving macOS 10.1. Today's
compilers have been allocating acceptable registers with or without this
change, but this future-proofs the code by precisely conveying the
acceptable registers. Back-patch to 9.4 (all supported versions).
Fujii Masao [Fri, 18 Oct 2019 13:32:18 +0000 (22:32 +0900)]
Fix failure of archive recovery with recovery_min_apply_delay enabled.
recovery_min_apply_delay parameter is intended for use with streaming
replication deployments. However, the document clearly explains that
the parameter will be honored in all cases if it's specified. So it should
take effect even if in archive recovery. But, previously, archive recovery
with recovery_min_apply_delay enabled always failed, and caused assertion
failure if --enable-caasert is enabled.
The cause of this problem is that; the ownership of recoveryWakeupLatch
that recovery_min_apply_delay uses was taken only when standby mode
is requested. So unowned latch could be used in archive recovery, and
which caused the failure.
This commit changes recovery code so that the ownership of
recoveryWakeupLatch is taken even in archive recovery. Which prevents
archive recovery with recovery_min_apply_delay from failing.
Back-patch to v9.4 where recovery_min_apply_delay was added.
Author: Fujii Masao Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Fujii Masao [Fri, 18 Oct 2019 13:24:18 +0000 (22:24 +0900)]
Make crash recovery ignore recovery_min_apply_delay setting.
In v11 or before, this setting could not take effect in crash recovery
because it's specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
this setting to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery_min_apply_delay setting.
Back-patch to v12 where the issue was added.
Author: Fujii Masao Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAHGQGwEyD6HdZLfdWc+95g=VQFPR4zQL4n+yHxQgGEGjaSVheQ@mail.gmail.com
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Alvaro Herrera [Fri, 18 Oct 2019 12:49:39 +0000 (14:49 +0200)]
Fix typo
Apparently while this code was being developed,
ReindexRelationConcurrently operated on multiple relations. The version
that was ultimately pushed doesn't, so this comment's use of plural is
inaccurate.
Michael Paquier [Fri, 18 Oct 2019 05:26:53 +0000 (14:26 +0900)]
Fix timeout handling in logical replication worker
The timestamp tracking the last moment a message is received in a
logical replication worker was initialized in each loop checking if a
message was received or not, causing wal_receiver_timeout to be ignored
in basically any logical replication deployments. This also broke the
ping sent to the server when reaching half of wal_receiver_timeout.
This simply moves the initialization of the timestamp out of the apply
loop to the beginning of LogicalRepApplyLoop().
Alvaro Herrera [Thu, 17 Oct 2019 13:06:06 +0000 (15:06 +0200)]
Fix minor bug in logical-replication walsender shutdown
Logical walsender should exit when it catches up with sending WAL during
shutdown; but there was a rare corner case when it failed to because of
a race condition that puts it back to wait for more WAL instead -- but
since there wasn't any, it'd not shut down immediately. It would only
continue the shutdown when wal_sender_timeout terminates the sleep,
which causes annoying waits during shutdown procedure. Restructure the
code so that we no longer forget to set WalSndCaughtUp in that case.
Alvaro Herrera [Thu, 17 Oct 2019 07:58:01 +0000 (09:58 +0200)]
Fix parallel restore of FKs to partitioned tables
When an FK constraint is created, it needs the index on the referenced
table to exist and be valid. When doing parallel pg_restore and the
referenced table was partitioned, this condition can sometimes not be
met, because pg_dump didn't emit sufficient object dependencies to
ensure so; this means that parallel pg_restore would fail in certain
conditions. Fix by having pg_dump make the FK constraint object
dependent on the partition attachment objects for the constraint's
referenced index.
This has been broken since f56f8f8da6af, so backpatch to Postgres 12.
Thomas Munro [Thu, 17 Oct 2019 00:24:50 +0000 (13:24 +1300)]
When restoring GUCs in parallel workers, show an error context.
Otherwise it can be hard to see where an error is coming from, when
the parallel worker sets all the GUCs that it received from the
leader. Bug #15726. Back-patch to 9.5, where RestoreGUCState()
appeared.
Reported-by: Tiago Anastacio Reviewed-by: Daniel Gustafsson, Tom Lane
Discussion: https://postgr.es/m/15726-6d67e4fa14f027b3%40postgresql.org
Thomas Munro [Wed, 16 Oct 2019 20:59:21 +0000 (09:59 +1300)]
Fix bug that could try to freeze running multixacts.
Commits 801c2dc7 and 801c2dc7 made it possible for vacuum to
try to freeze a multixact that is still running. That was
prevented by a check, but raised an error. Repair.
Back-patch all the way.
Author: Nathan Bossart, Jeremy Schneider Reported-by: Jeremy Schneider Reviewed-by: Jim Nasby, Thomas Munro
Discussion: https://postgr.es/m/DAFB8AFF-2F05-4E33-AD7F-FF8B0F760C17%40amazon.com
Alvaro Herrera [Wed, 16 Oct 2019 12:51:23 +0000 (14:51 +0200)]
Fix crash when reporting CREATE INDEX progress
A race condition can make us try to dereference a NULL pointer to the
PGPROC struct of a process that's already finished. That results in
crashes during REINDEX CONCURRENTLY and CREATE INDEX CONCURRENTLY.
This was introduced in ab0dfc961b6a, so backpatch to pg12.
Tomas Vondra [Wed, 16 Oct 2019 11:23:18 +0000 (13:23 +0200)]
Improve the check for pg_catalog.unknown data type in pg_upgrade
The pg_upgrade check for pg_catalog.unknown type when upgrading from 9.6
had a couple of issues with domains and composite types - it detected
even composite types unused in objects with storage. So for example this
was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE unknown_composite AS (u pg_catalog.unknown)
On the other hand, this only happened with composite types directly on
the pg_catalog.unknown data type, but not with a domain. So this was not
detected
CREATE DOMAIN unknown_domain AS pg_catalog.unknown;
CREATE TYPE unknown_composite_2 AS (u unknown_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.unknown type through a domain. So we missed cases like this
CREATE TABLE t (u unknown_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. Backpatch all
the way to 10, where the of pg_catalog.unknown data type was restricted.
Author: Tomas Vondra Backpatch-to: 10-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
Tomas Vondra [Wed, 16 Oct 2019 11:23:14 +0000 (13:23 +0200)]
Improve the check for pg_catalog.line data type in pg_upgrade
The pg_upgrade check for pg_catalog.line data type when upgrading from
9.3 had a couple of issues with domains and composite types. Firstly, it
triggered false positives for composite types unused in objects with
storage. This was enough to trigger an unnecessary pg_upgrade failure:
CREATE TYPE line_composite AS (l pg_catalog.line)
On the other hand, this only happened with composite types directly on
the pg_catalog.line data type, but not with a domain. So this was not
detected
CREATE DOMAIN line_domain AS pg_catalog.line;
CREATE TYPE line_composite_2 AS (l line_domain);
unlike the first example. These false positives and inconsistencies are
unfortunate, but what's worse we've failed to detected objects using the
pg_catalog.line data type through a domain. So we missed cases like this
CREATE TABLE t (l line_composite_2);
The consequence is clusters broken after a pg_upgrade.
This fixes these false positives and false negatives by using the same
recursive CTE introduced by eaf900e842 for sql_identifier. 9.3 did not
support domains on composite types, but we can still have multi-level
composite types.
Backpatch all the way to 9.4, where the format for pg_catalog.line data
type changed.
Author: Tomas Vondra Backpatch-to: 9.4-
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
Andres Freund [Wed, 16 Oct 2019 09:37:34 +0000 (02:37 -0700)]
Replace alter_table.sql test usage of event triggers.
The test in 93765bd956b added an event trigger to ensure that the
tested table rewrites do not get optimized away (as happened in the
past). But doing so would require running the tests in isolation, as
otherwise the trigger might also fire in concurrent sessions, causing
test failures there.
Reported-By: Tom Lane
Discussion: https://postgr.es/m/3328.1570740683@sss.pgh.pa.us
Backpatch: 12, just as 93765bd956b
Michael Paquier [Wed, 16 Oct 2019 04:10:31 +0000 (13:10 +0900)]
Doc: Fix various inconsistencies
This fixes multiple areas of the documentation:
- COPY for its past compatibility section.
- SET ROLE mentioning INHERITS instead of INHERIT
- PREPARE referring to stmt_name, that is not present.
- Extension documentation about format name with upgrade scripts.
Backpatch down to 9.4 for the relevant parts.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/bf95233a-9943-b341-e2ff-a860c28af481@gmail.com
Backpatch-through: 9.4
Andres Freund [Tue, 15 Oct 2019 17:40:13 +0000 (10:40 -0700)]
Fix CLUSTER on expression indexes.
Since the introduction of different slot types, in 1a0586de3657, we
create a virtual slot in tuplesort_begin_cluster(). While that looks
right, it unfortunately doesn't actually work, as ExecStoreHeapTuple()
is used to store tuples in the slot. Unfortunately no regression tests
for CLUSTER on expression indexes existed so far.
Fix the slot type, and add bare bones tests for CLUSTER on expression
indexes.
Reported-By: Justin Pryzby
Author: Andres Freund
Discussion: https://postgr.es/m/20191011210320.GS10470@telsasoft.com
Backpatch: 12, like 1a0586de3657
Tomas Vondra [Mon, 14 Oct 2019 20:31:56 +0000 (22:31 +0200)]
Check for tables with sql_identifier during pg_upgrade
Commit 7c15cef86d changed sql_identifier data type to be based on name
instead of varchar. Unfortunately, this breaks on-disk format for this
data type. Luckily, that should be a very rare problem, as this data
type is used only in information_schema views, so this only affects user
objects (tables, materialized views and indexes). One way to end in
such situation is to do CTAS with a query on those system views.
There are two options to deal with this - we can either abort pg_upgrade
if there are user objects with sql_identifier columns in pg_upgrade, or
we could replace the sql_identifier type with varchar. Considering how
rare the issue is expected to be, and the complexity of replacing the
data type (e.g. in matviews), we've decided to go with the simple check.
The query is somewhat complex - the sql_identifier data type may be used
indirectly - through a domain, a composite type or both, possibly in
multiple levels. Detecting this requires a recursive CTE.
Backpatch to 12, where the sql_identifier definition changed.
Reported-by: Hans Buschmann
Author: Tomas Vondra Reviewed-by: Tom Lane Backpatch-to: 12
Discussion: https://postgr.es/m/16045-673e8fa6b5ace196%40postgresql.org
Michael Paquier [Sun, 13 Oct 2019 23:58:47 +0000 (08:58 +0900)]
Update test output of sepgsql for ALTER TABLE COLUMN DROP
1df5875 has changed the way dependencies are dropped for this command
with inheritance trees, which impacts sepgsql. This just updates the
regression test output to take care of the failures and adapt to the new
code.
Reported by buildfarm member rhinoceros.
Author: Michael Paquier Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/20191013101331.GC1434@paquier.xyz
Backpatch-through: 12
Michael Paquier [Sun, 13 Oct 2019 08:53:08 +0000 (17:53 +0900)]
Fix dependency handling of column drop with partitioned tables
When dropping a column on a partitioned table which has one or more
partitioned indexes, the operation was failing as dependencies with
partitioned indexes using the column dropped were not getting removed in
a way consistent with the columns involved across all the relations part
of an inheritance tree.
This commit refactors the code executing column drop so as all the
columns from an inheritance tree to remove are gathered first, and
dropped all at the end. This way, we let the dependency machinery sort
out by itself the deletion of all the columns with the partitioned
indexes across a partition tree.
This issue has been introduced by 1d92a0c, so backpatch down to
REL_12_STABLE.
Author: Amit Langote, Michael Paquier Reviewed-by: Álvaro Herrera, Ashutosh Sharma
Discussion: https://postgr.es/m/CA+HiwqE9kuBsZ3b5pob2-cvE8ofzPWs-og+g8bKKGnu6b4-yTQ@mail.gmail.com
Backpatch-through: 12
Noah Misch [Sat, 12 Oct 2019 07:21:47 +0000 (00:21 -0700)]
AIX: Stop adding option -qsrcmsg.
With xlc v16.1.0, it causes internal compiler errors. With xlc versions
not exhibiting that bug, removing -qsrcmsg merely changes the compiler
error reporting format. Back-patch to 9.4 (all supported versions).
Fujii Masao [Fri, 11 Oct 2019 06:47:59 +0000 (15:47 +0900)]
Make crash recovery ignore restore_command and recovery_end_command settings.
In v11 or before, those settings could not take effect in crash recovery
because they are specified in recovery.conf and crash recovery always
starts without recovery.conf. But commit 2dedf4d9a8 integrated
recovery.conf into postgresql.conf and which unexpectedly allowed
those settings to take effect even in crash recovery. This is definitely
not good behavior.
To fix the issue, this commit makes crash recovery always ignore
restore_command and recovery_end_command settings.
Back-patch to v12 where the issue was added.
Author: Fujii Masao Reviewed-by: Peter Eisentraut
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Tom Lane [Thu, 10 Oct 2019 18:24:57 +0000 (14:24 -0400)]
Put back pqsignal() as an exported libpq symbol.
This reverts commit f7ab80285. Per discussion, we can't remove an
exported symbol without a SONAME bump, which we don't want to do.
In particular that breaks usage of current libpq.so with pre-9.3
versions of psql etc, which need libpq to export pqsignal().
As noted in that commit message, exporting the symbol from libpgport.a
won't work reliably; but actually we don't want to export src/port's
implementation anyway. Any pre-9.3 client is going to be expecting the
definition that pqsignal() had before 9.3, which was that it didn't
set SA_RESTART for SIGALRM. Hence, put back pqsignal() in a separate
source file in src/interfaces/libpq, and give it the old semantics.
Andres Freund [Thu, 10 Oct 2019 05:00:50 +0000 (22:00 -0700)]
Fix table rewrites that include a column without a default.
In c2fe139c201c I made ATRewriteTable() use tuple slots. Unfortunately
I did not notice that columns can be added in a rewrite that do not
have a default, when another column is added/altered requiring one.
Initialize columns to NULL again, and add tests.
Bug: #16038 Reported-By: anonymous
Author: Andres Freund
Discussion: https://postgr.es/m/16038-5c974541f2bf6749@postgresql.org
Backpatch: 12, where the bug was introduced in c2fe139c201c
Michael Paquier [Wed, 9 Oct 2019 04:31:13 +0000 (13:31 +0900)]
Flush logical mapping files with fd opened for read/write at checkpoint
The file descriptor was opened with read-only to fsync a regular file,
which would cause EBADFD errors on some platforms.
This is similar to the recent fix done by a586cc4b (which was broken by
me with 82a5649), except that I noticed this issue while monitoring the
backend code for similar mistakes. Backpatch to 9.4, as this has been
introduced since logical decoding exists as of b89e151.
Author: Michael Paquier Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20191006045548.GA14532@paquier.xyz
Backpatch-through: 9.4
Bruce Momjian [Wed, 9 Oct 2019 01:49:08 +0000 (21:49 -0400)]
doc: improve docs so config value default units are clearer
Previously, our docs would say "Specifies the number of milliseconds"
but it wasn't clear that "milliseconds" was merely the default unit.
New text says "Specifies duration (defaults to milliseconds)", which is
clearer.
Tom Lane [Mon, 7 Oct 2019 16:39:09 +0000 (12:39 -0400)]
Check for too many postmaster children before spawning a bgworker.
The postmaster's code path for spawning a bgworker neglected to check
whether we already have the max number of live child processes. That's
a bit hard to hit, since it would necessarily be a transient condition;
but if we do, AssignPostmasterChildSlot() fails causing a postmaster
crash, as seen in a report from Bhargav Kamineni.
To fix, invoke canAcceptConnections() in the bgworker code path, as we
do in the other code paths that spawn children. Since we don't want
the same pmState tests in this case, add a child-process-type parameter
to canAcceptConnections() so that it can know what to do.
Back-patch to 9.5. In principle the same hazard exists in 9.4, but the
code is enough different that this patch wouldn't quite fix it there.
Given the tiny usage of bgworkers in that branch it doesn't seem worth
creating a variant patch for it.
Tom Lane [Sun, 6 Oct 2019 18:14:45 +0000 (14:14 -0400)]
Doc: improve docs about pg_statistic_ext_data.
Commit aa087ec64 was a bit over-hasty about the doc changes needed
while splitting pg_statistic_ext_data off from pg_statistic_ext.
It duplicated one para and inserted another in what seems to me
to be the wrong section. Fix that up, and in passing do some minor
copy-editing.
Noah Misch [Sat, 5 Oct 2019 17:05:05 +0000 (10:05 -0700)]
Report test_atomic_ops() failures consistently, via macros.
This prints the unexpected value in more failure cases, and it removes
forty-eight hand-maintained error messages. Back-patch to 9.5, which
introduced these tests.
Reviewed (in an earlier version) by Andres Freund.
Tom Lane [Sat, 5 Oct 2019 16:26:55 +0000 (12:26 -0400)]
Avoid use of wildcard in pg_waldump's .gitignore.
This would be all right, maybe, if it didn't also match a file that
definitely should not be ignored. We don't add rmgrs so often that
manual maintenance of this file list is impractical, so just write
out the list.
(I find the equivalent wildcard use in the Makefile pretty lazy and
unsafe as well, but will leave that alone until it actually causes a
problem.)
One of the upsert related tests is unstable (sometimes even hanging
until isolationtester's step timeout is reached). Based on preliminary
analysis that might be a problem outside of just that test, but not
really related to EPQ and triggers. Disable for now, to get the
buildfarm greener again.
Discussion: https://postgr.es/m/20191004222437.45qmglpto43pd3jb@alap3.anarazel.de
Backpatch: 9.6-, just like c8841199509.
Andres Freund [Fri, 4 Oct 2019 20:56:04 +0000 (13:56 -0700)]
Add isolation tests for the combination of EPQ and triggers.
As evidenced by bug #16036 this area is woefully under-tested. Add
fairly extensive tests for the combination.
Backpatch back to 9.6 - before that isolationtester was not capable
enough. While we don't backpatch tests all the time, future fixes to
trigger.c would potentially look different enough in 12+ from the
earlier branches that introducing bugs during backpatching is more
likely than normal. Also, it's just a crucial and undertested area of
the code.
Author: Andres Freund
Discussion: https://postgr.es/m/16036-28184c90d952fb7f@postgresql.org
Backpatch: 9.6-, the earliest these tests work
Andres Freund [Fri, 4 Oct 2019 18:59:34 +0000 (11:59 -0700)]
Fix crash caused by EPQ happening with a before update trigger present.
When ExecBRUpdateTriggers()'s GetTupleForTrigger() follows an EPQ
chain the former needs to run the result tuple through the junkfilter
again, and update the slot containing the new version of the tuple to
contain that new version. The input tuple may already be in the
junkfilter's output slot, which used to be OK - we don't need the
previous version anymore. Unfortunately ff11e7f4b9ae started to use
ExecCopySlot() to update newslot, and ExecCopySlot() doesn't support
copying a slot into itself, leading to a slot in a corrupt
state, which then can cause crashes or other symptoms.
Fix this by skipping the ExecCopySlot() when copying into itself.
While we could have easily made ExecCopySlot() handle that case, it
seems better to add an assert forbidding doing so instead. As the goal
of copying might be to make the contents of one slot independent from
another, it seems failure prone to handle doing so silently.
A follow-up commit will add tests for the obviously under-covered
combination of EPQ and triggers. Done as a separate commit as it might
make sense to backpatch them further than this bug.
Also remove confusion with confusing variable names for slots in
ExecBRDeleteTriggers() and ExecBRUpdateTriggers().
Bug: #16036 Reported-By: Антон Власов
Author: Andres Freund
Discussion: https://postgr.es/m/16036-28184c90d952fb7f@postgresql.org
Backpatch: 12-, where ff11e7f4b9ae was merged
Andres Freund [Fri, 4 Oct 2019 20:08:51 +0000 (13:08 -0700)]
Use a fd opened for read/write when syncing slots during startup, take 2.
Cribbing from dfbaed45975:
Some operating systems, including the reporter's windows, return EBADFD
or similar when fsync() is invoked on a O_RDONLY file descriptor.
Unfortunately RestoreSlotFromDisk() does exactly that; which causes
failures after restarts in at least some scenarios.
If you hit the bug the error message will be something like
ERROR: could not fsync file "pg_replslot/$name/state": Bad file descriptor
Simply use O_RDWR instead of O_RDONLY when opening the relevant file
descriptor to fix the bug.
Unfortunately this fix was undone in 82a5649fb9db. Re-apply, and add a
comment.
Bug: 16039 Reported-By: Hans Buschmann
Author: Andres Freund
Discussion: https://postgr.es/m/16039-196fc97cc05e141c@postgresql.org
Backpatch: 12-, as 82a5649fb9db
Andrew Dunstan [Fri, 4 Oct 2019 19:34:40 +0000 (15:34 -0400)]
Handle spaces in OpenSSL install location for MSVC
First, make sure that the .exe name is quoted when trying to get the
version number. Also, don't quote the lib name for using in the project
files if it's already been quoted. This second change applies to all
libraries, not just OpenSSL.
This has clearly been broken forever, so backpatch to all live branches.
Tom Lane [Fri, 4 Oct 2019 14:34:21 +0000 (10:34 -0400)]
Fix bitshiftright()'s zero-padding some more.
Commit 5ac0d9360 failed to entirely fix bitshiftright's habit of
leaving one-bits in the pad space that should be all zeroes,
because in a moment of sheer brain fade I'd concluded that only
the code path used for not-a-multiple-of-8 shift distances needed
to be fixed. Of course, a multiple-of-8 shift distance can also
cause the problem, so we need to forcibly zero the extra bits
in both cases.
Per bug #16037 from Alexander Lakhin. As before, back-patch to all
supported branches.
Michael Paquier [Fri, 4 Oct 2019 00:16:03 +0000 (09:16 +0900)]
Fix --dry-run mode of pg_rewind
Even if --dry-run mode was specified, the control file was getting
updated, preventing follow-up runs of pg_rewind to work properly on the
target data folder. The origin of the problem came from the refactoring
done by ce6afc6.
Tom Lane [Thu, 3 Oct 2019 21:34:25 +0000 (17:34 -0400)]
Avoid unnecessary out-of-memory errors during encoding conversion.
Encoding conversion uses the very simplistic rule that the output
can't be more than 4X longer than the input, and palloc's a buffer
of that size. This results in failure to convert any string longer
than 1/4 GB, which is becoming an annoying limitation.
As a band-aid to improve matters, allow the allocated output buffer
size to exceed 1GB. We still insist that the final result fit into
MaxAllocSize (1GB), though. Perhaps it'd be safe to relax that
restriction, but it'd require close analysis of all callers, which
is daunting (not least because external modules might call these
functions). For the moment, this should allow a 2X to 4X improvement
in the longest string we can convert, which is a useful gain in
return for quite a simple patch.
Also, once we have successfully converted a long string, repalloc
the output down to the actual string length, returning the excess
to the malloc pool. This seems worth doing since we can usually
expect to give back several MB if we take this path at all.
This still leaves much to be desired, most notably that the assumption
that MAX_CONVERSION_GROWTH == 4 is very fragile, and yet we have no
guard code verifying that the output buffer isn't overrun. Fixing
that would require significant changes in the encoding conversion
APIs, so it'll have to wait for some other day.
The present patch seems safely back-patchable, so patch all supported
branches.
Tom Lane [Thu, 3 Oct 2019 17:56:26 +0000 (13:56 -0400)]
Allow repalloc() to give back space when a large chunk is downsized.
Up to now, if you resized a large (>8K) palloc chunk down to a smaller
size, aset.c made no attempt to return any space to the malloc pool.
That's unpleasant if a really large allocation is resized to a
significantly smaller size. I think no such cases existed when this
code was designed, and I'm not sure whether they're common even yet,
but an upcoming fix to encoding conversion will certainly create such
cases. Therefore, fix AllocSetRealloc so that it gives realloc()
a chance to do something with the block. This doesn't noticeably
increase complexity, we mostly just have to change the order in which
the cases are considered.
Andrew Gierth [Thu, 3 Oct 2019 09:54:52 +0000 (10:54 +0100)]
Selectively include window frames in expression walks/mutates.
query_tree_walker and query_tree_mutator were skipping the
windowClause of the query, without regard for the fact that the
startOffset and endOffset in a WindowClause node are expression trees
that need to be processed. This was an oversight in commit ec4be2ee6
from 2010 which added the expression fields; the main symptom is that
function parameters in window frame clauses don't work in inlined
functions.
Fix (as conservatively as possible since this needs to not break
existing out-of-tree callers) and add tests.
Backpatch all the way, since this has been broken since 9.0.
Per report from Alastair McKinley; fix by me with kibitzing and review
from Tom Lane.
Michael Paquier [Wed, 2 Oct 2019 06:53:51 +0000 (15:53 +0900)]
Remove temporary WAL and history files at the end of archive recovery
cbc55da has reworked the order of some actions at the end of archive
recovery. Unfortunately this overlooked the fact that the startup
process needs to remove RECOVERYXLOG (for temporary WAL segment newly
recovered from archives) and RECOVERYHISTORY (for temporary history
file) at this step, leaving the files around even after recovery ended.
Tom Lane [Mon, 30 Sep 2019 18:31:12 +0000 (14:31 -0400)]
Doc: improve PREPARE documentation, cross-referencing to plan_cache_mode.
The behavior described in the PREPARE man page applies only for the
default plan_cache_mode setting, so explain that properly. Rewrite
some of the text while I'm here. Per suggestion from Bruce.
This commit adds a mention that the order of columns specified during
multi-column most-common-value statistics is insignificant, and tries to
simplify examples.
Make crash recovery ignore recovery target settings.
In v11 or before, recovery target settings could not take effect in
crash recovery because they are specified in recovery.conf and
crash recovery always starts without recovery.conf. But commit 2dedf4d9a8 integrated recovery.conf into postgresql.conf and
which unexpectedly allowed recovery target settings to take effect
even in crash recovery. This is definitely not good behavior.
To fix the issue, this commit makes crash recovery always ignore
recovery target settings.
Back-patch to v12.
Author: Peter Eisentraut Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/e445616d-023e-a268-8aa1-67b8b335340c@pgmasters.net
Andres Freund [Sun, 29 Sep 2019 23:27:18 +0000 (16:27 -0700)]
jit: Re-allow JIT compilation of execGrouping.c hashtable comparisons.
In the course of 5567d12ce03, 356687bd8 and 317ffdfeaac, I changed
BuildTupleHashTable[Ext]'s call to ExecBuildGroupingEqual to not pass
in the parent node, but NULL. Which in turn prevents the tuple
equality comparator from being JIT compiled. While that fixes
bug #15486, it is not actually necessary after all of the above commits,
as we don't re-build the comparator when using the new
BuildTupleHashTableExt() interface (as the content of the hashtable
are reset, but the TupleHashTable itself is not).
Therefore re-allow jit compilation for callers that use
BuildTupleHashTableExt with a separate context for "metadata" and
content.
As in the previous commit, there's ongoing work to make this easier to
test to prevent such regressions in the future, but that
infrastructure is not going to be backpatchable.
The performance impact of not JIT compiling hashtable equality
comparators can be substantial e.g. for aggregation queries that
aggregate a lot of input rows to few output rows (when there are a lot
of output groups, there will be fewer comparisons).
Author: Andres Freund
Discussion: https://postgr.es/m/20190927072053.njf6prdl3vb7y7qb@alap3.anarazel.de
Backpatch: 11, just as 5567d12ce03
Andres Freund [Sun, 29 Sep 2019 22:24:54 +0000 (15:24 -0700)]
Fix determination when slot types for upper executor nodes are fixed.
For many queries the fact that the tuple descriptor from the lower
node was not taken into account when determining whether the type of a
slot is fixed, lead to tuple deforming for such upper nodes not to be
JIT accelerated.
There is ongoing work to enable writing regression tests for related
behavior (including a patch that would have detected this
regression), by optionally showing such details in EXPLAIN. But as it
seems unlikely that that will be suitable for stable branches, just
merge the fix for now.
While it's fairly close to the 12 release window, the fact that 11
continues to perform JITed tuple deforming in these cases, that
there's still cases where we do so in 12, and the fact that the
performance regression can be sizable, weigh in favor of fixing it
now.
Author: Andres Freund
Discussion: https://postgr.es/m/20190927072053.njf6prdl3vb7y7qb@alap3.anarazel.de
Backpatch: 12-, where 675af5c01e297 was merged.
Peter Eisentraut [Sat, 28 Sep 2019 13:54:02 +0000 (15:54 +0200)]
Fix compilation with older OpenSSL versions
Some older OpenSSL versions (0.9.8 branch) define TLS*_VERSION macros
but not the corresponding SSL_OP_NO_* macro, which causes the code for
handling ssl_min_protocol_version/ssl_max_protocol_version to fail to
compile. To fix, add more #ifdefs and error handling.
Reported-by: Victor Wagner <vitus@wagner.pp.ru> Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/20190924101859.09383b4f%40fafnir.local.vm
Tom Lane [Sat, 28 Sep 2019 17:33:34 +0000 (13:33 -0400)]
Improve stability of partition_prune regression test.
This test already knew that, to get stable test output, it had to hide
"loops" counts in EXPLAIN ANALYZE results. But that's not nearly enough:
if we get a smaller number of workers than we planned for, then the
"Workers Launched" number will change, and so will all the rows and loops
counts up to the Gather node. This has resulted in repeated failures in
the buildfarm, so adjust the test to filter out all these counts.
(Really, we wouldn't bother with EXPLAIN ANALYZE at all here, except
that currently the only way to verify that executor-time pruning has
happened is to look for '(never executed)' annotations. Those are
stable and needn't be filtered out.)
Tom Lane [Fri, 27 Sep 2019 15:28:25 +0000 (11:28 -0400)]
ANALYZE a_star and its children to avoid plan instability in tests.
We've noted certain EXPLAIN queries on these tables occasionally showing
unexpected plan choices. This seems to happen because VACUUM sometimes
fails to update relpages/reltuples for one of these single-page tables,
due to bgwriter or checkpointer holding a pin on the lone page at just
the wrong time. To ensure those values get set, insert explicit ANALYZE
operations on these tables after we finish populating them. This
doesn't seem to affect any other test cases, so it's a usable fix.
Back-patch to v12. In principle the issue exists further back, but
we have not seen it before v12, so I won't risk back-patching further.
Peter Eisentraut [Fri, 27 Sep 2019 14:21:47 +0000 (16:21 +0200)]
doc: Add timeline as valid recovery target in standby.signal documentation
The documentation states that no target settings will be used when
standby.signal is present, but this is not quite the case since
recovery_target_timeline is a valid recovery target for a standby.
Update the documentation with this exception.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/e445616d-023e-a268-8aa1-67b8b335340c%40pgmasters.net
The test name and the following test cases suggest the index created
should be hash index, but it forgot to add 'using hash' in the test case.
This in itself won't improve code coverage as there were some other tests
which were covering the corresponding code. However, it is better if the
added tests serve their actual purpose.
Reported-by: Paul A Jungwirth
Author: Paul A Jungwirth Reviewed-by: Mahendra Singh
Backpatch-through: 9.4
Discussion: https://postgr.es/m/CA+renyV=Us-5XfMC25bNp-uWSj39XgHHmGE9Rh2cQKMegSj52g@mail.gmail.com
Tom Lane [Wed, 25 Sep 2019 21:30:42 +0000 (17:30 -0400)]
Fix handling of GENERATED columns in CREATE TABLE LIKE INCLUDING DEFAULTS.
LIKE INCLUDING DEFAULTS tried to copy the attrdef expression without
copying the state of the attgenerated column. This is in fact wrong,
because GENERATED and DEFAULT expressions are not the same kind of animal;
one can contain Vars and the other not. We *must* copy attgenerated
when we're copying the attrdef expression. Rearrange the if-tests
so that the expression is copied only when the correct one of
INCLUDING DEFAULTS and INCLUDING GENERATED has been specified.
Michael Paquier [Wed, 25 Sep 2019 01:08:26 +0000 (10:08 +0900)]
Fix failure with lock mode used for custom relation options
In-core relation options can use a custom lock mode since 47167b7, that
has lowered the lock available for some autovacuum parameters. However
it forgot to consider custom relation options. This causes failures
with ALTER TABLE SET when changing a custom relation option, as its lock
is not defined. The existing APIs to define a custom reloption does not
allow to define a custom lock mode, so enforce its initialization to
AccessExclusiveMode which should be safe enough in all cases. An
upcoming patch will extend the existing APIs to allow a custom lock mode
to be defined.
The problem can be reproduced with bloom indexes, so add a test there.
Reported-by: Nikolay Sharplov Analyzed-by: Thomas Munro, Michael Paquier
Author: Michael Paquier Reviewed-by: Kuntal Ghosh
Discussion: https://postgr.es/m/20190920013831.GD1844@paquier.xyz
Backpatch-through: 9.6
Tom Lane [Mon, 23 Sep 2019 16:37:04 +0000 (12:37 -0400)]
Doc: clarify handling of duplicate elements in array containment tests.
The array <@ and @> operators do not worry about duplicates: if every
member of array X matches some element of array Y, then X is contained
in Y, even if several members of X get matched to the same Y member.
This was not explicitly stated in the docs though, so improve matters.
Tom Lane [Mon, 23 Sep 2019 14:32:02 +0000 (10:32 -0400)]
Doc: clean up some issues with spellings of contributor names.
In the v12 contributors list, remove a couple of duplicates
that had crept in due to variant spellings of a person's name.
Try to standardize Japanese names as given-name-first.
projects / postgresql / log