Tian Hao [Sun, 13 Jan 2019 08:05:12 +0000 (16:05 +0800)]
Fix some bugs in phy
1. fix bug PHY/RTC functions called in ISR (update phy to v4007)
2. add UnitTest to test it
3. fix task watchdog bug when wifi change channel
4. disable/enable agc to mac deinit/init
XiaXiaotian [Thu, 27 Dec 2018 09:49:07 +0000 (17:49 +0800)]
esp32: unforce wifi if receiving beacon with no data buffered in dream
state and reduce force receiving broadcast data time
1. If receiving beacon which indicates that there is no data buffered,
do not force to receive WiFi data.
2. If receiving beacon which indicates that there is broadcast data
buffered, reduce the time to force receiving broadcast data.
Ivan Grokhotkov [Wed, 19 Dec 2018 07:53:50 +0000 (15:53 +0800)]
esp_timer: do not allow deleting timers while callbacks are dispatched
timer_process_alarm function of esp_timer holds a spinlock for the
entire duration of its operation, except for the time when timer
callback function is called. It is possible that when
timer_process_alarm releases the spinlock, a higher priority task may
run and delete the timer. Then the execution will return to
timer_process_alarm, and this will either cause a crash, or undesired
execution of callback after the timer has been stopped or deleted.
To solve this problem, add a mutex which will prevent deletion of timers
while callbacks are being dispatched.
Mahavir Jain [Mon, 14 May 2018 09:03:45 +0000 (14:33 +0530)]
i2s: add (optional) support to clear tx descriptor in underflow case
It has been observed that, in case of underflow (data unavailability) in
I2S transmission, previously filled up tx descriptors continue to get
transmitted on line, causing noise in case of audio use case.
This change adds optional `tx_desc_auto_clear` field during I2S driver intialization
than can zero initialize tx descriptor in case of underflow situation in
interrupt handler itself.
aleks [Mon, 3 Dec 2018 13:16:36 +0000 (14:16 +0100)]
examples: freemodbus port serial slave move uart mode settings into example
Update freemodbus component file esp-idf/components/freemodbus/port/portserial.c to remove UART mode settings;
Move UART mode settings into esp-idf/examples/protocols/modbus_slave/main/freemodbus.c
Move UART pin settings from Component config into example Kconfig.projbuild file
Move setup of UART port pins from freemodbus component into example file
bugfix/ota_magic_byte_issue: Fixes OTA magic byte error
On enabling flash encryption, OTA fails with magic byte error in the second chunk
if the http data is split into two or more chunks and first chunk is less than 16.
Liu Zhi Fu [Mon, 17 Dec 2018 12:52:40 +0000 (20:52 +0800)]
esp32: fix WiFi stop bug in WiFi/BT coexist mode
This fix includes following changes:
1. Fix the bug that esp_restart()/esp_wifi_stop() sometimes fails in WiFi/BT coexist mode.
2. Add a timer for WiFi stop and stop WiFi forcibly once the timer expires.
wangmengyang [Fri, 14 Dec 2018 06:56:29 +0000 (14:56 +0800)]
component/bt: bugfix of bluetooth modem sleep not being able to work with Dynamic Frequency Scaling
1. start an esp_timer on entering sleep to acquire pm_lock before wake up from modem sleep
2. decrease the clock division of XTAL fed to bluetooth low power clock from 32us to 2us period to allow to work under 240MHz Max CPU frequency
3. decrease the minimum sleep duration threshold to allow shorter bluetooth modem sleep period, especially for BLE with short connection interval
4. reconfigure bluetooth baseband(BT-BB) settings after PHY/RF init upon waking up from modem sleep to avoid packet RX/TX performance degradation
Xia Xiaotian [Mon, 10 Dec 2018 13:26:24 +0000 (21:26 +0800)]
add hostname option in dhcp discover
Hostname option has been removed from dhcp discover since IDFv3.2.
But it remains in dhcp request due to which ESP32 can not get IPv4 address
from some APs. Re-add hostname option to dhcp discover to solve this issue.
morris [Tue, 4 Dec 2018 09:13:48 +0000 (17:13 +0800)]
ethernet: phy init timeout
When ethernet enable again after disable it before, phy init will report timeout.
The cause of this problem is that the enabling of emac clock is too late, and should be placed before phy init.
spi: fix the crash when callbacks are not in the IRAM
Introduced in 9c23b8e5 and 4f87a62f. To get higher speed, menuconfig
options are added to put ISR and other functions into the IRAM. The
interrupt flag ESP_INTR_FLAG_IRAM is also mistakenly set when the ISR is
put into the IRAM. However callbacks, which are wrote by the user, are
called in the master and slave ISR. The user may not be aware of that
these callbacks are not disabled during flash operations. Any cache miss
during flash operation will cause panic.
Essentially IRAM functions and intrrupt flag ESP_INTR_FLAG_IRAM are
different, the latter means not disabling the ISR during flash
operations. New bus_config flag intr_flags is offered to help set the
interrupt attribute, including priority level, SHARED, IRAM (not
disabled during flash operations). It introduced a small BREAK to
IDFv3.1 (but the same as IDFv3.0) that the user has to manually set IRAM
flag now (therefore he's aware of the IRAM thing) to void the ISR being
disabled during flash operations.
Tian Hao [Sat, 1 Dec 2018 10:10:19 +0000 (18:10 +0800)]
component/bt and esp32: fix two bluetooth bugs that caused by coexist module
1. Fix interrupt watchdog timeout in bluetooth "btdm_bb_isr"
2. Fix BLE assert(512) or assert(1536) in rwble.c at line 222
3. Update librtc.a to fix BLE assert(512) in rwble.c at line 222
The #1 and #2 occurs random.
The #3 bug occurs in certain scenario:
1. If Wifi start softap and BLE is working
2. If wifi start station, but do not use normal station operation, such
as just use espnow, while BLE is working
3. Any other scenario, that wifi works without use software coexist
operation, while BLE is working(such as do advertising and ...)
He Yin Ling [Mon, 26 Nov 2018 08:40:32 +0000 (16:40 +0800)]
ci: combine unit_test and integration_test stage:
The number of runners of integration test is not bottleneck to CI
pipeline performance now. Combine these 2 stages will make integration
test executed even unit test fails. This could help us to collect more
info about test history.
projects / esp-idf / log