Johann [Fri, 2 Sep 2016 22:21:35 +0000 (15:21 -0700)]
Restore vp8_bilinear_predict4x4_neon
This function was removed when clang started introducing alignment hints
which caused the 32 bit vld1_lane_u32/vst1_lane_u32 to fail:
https://llvm.org/bugs/show_bug.cgi?id=24421
The load has been rendered safe with an implementation ~indiscernible
performance-wise that uses _u8 and over-reads just a touch.
It is still ~5x faster than C in the unaligned case and doing both
filters.
Johann [Thu, 15 Sep 2016 22:59:42 +0000 (15:59 -0700)]
vp8 postproc: expand CONFIG_POSTPROC guard
postproc.c is overloaded and used for both postproc and internal stats.
If only --enable-internal-stats is specified there are issues with
non-existent struct members and unused functions.
Johann [Fri, 2 Sep 2016 18:29:20 +0000 (11:29 -0700)]
Restore vp8_sixtap_predict4x4_neon
This function was removed when clang started introducing alignment hints
which caused the 32 bit vld1_lane_u32/vst1_lane_u32 to fail:
https://llvm.org/bugs/show_bug.cgi?id=24421
The load has been rendered safe with an implementation ~indiscernible
performance-wise that uses _u8 and over-reads just a touch.
The store, when unaligned, has a version that is ~25% slower but safe
when xoffset = 0 (second pass filter only). When the first pass filter
(or both) are in play, the new version is almost identical in speed.
Worst case performance (both filters, unaligned stores) is roughly 3-4x
faster than C.
Johann [Tue, 13 Sep 2016 21:12:03 +0000 (14:12 -0700)]
vp9 frame parallel test: Initialize cfg to 0
Use vp9_zero() to set every element.
Cleans -Wextra/-Wmissing-field-initializers:
missing initializer for member ‘vpx_codec_dec_cfg::w’
missing initializer for member ‘vpx_codec_dec_cfg::h’
Marco [Fri, 9 Sep 2016 16:03:22 +0000 (09:03 -0700)]
vp8: Set the skin model to mode 1.
This change was reverted before due to a hangouts encode-time
regression investigation. But since then this change has been
cleared of causing any noticeable regression.
This mode reduces some false detection, and uses the
same model as in vp9.
Johann Koenig [Fri, 2 Sep 2016 01:39:17 +0000 (01:39 +0000)]
Merge changes from topic 'Wundef'
* changes:
Enable -Wundef by default
Define VP8_TEMPORAL_ALT_REF to !CONFIG_REALTIME_ONLY
Remove CONFIG_DEBUG guards from assert()
Remove unused function vpx_de_mblock
Fix -Wundef warning for OUTPUT_FPF
Fix -Wundef warning for __SANITIZE_ADDRESS__
In regards to the safety of these casts they are of two types:-
- Normalized bits per (16x16) MB stored in a 32 bit int (This is safe as bits
per MB even with << 9 normalization cant overflow 32 bits. Even raw 12
bits hdr source even would only be 29 bits :- (4+4+12+9) and the encoder
imposes much stricter limits than this on max bit rate.
- Cast as part of variance calculations. There is an internal cast up to 64 bit
for the Sum X Sum calculation, but after normalization dividing by the number
of points the result will always be <= the SSE value.
paulwilkins [Mon, 8 Aug 2016 14:08:21 +0000 (15:08 +0100)]
Modified resize loop constraints.
Using a tighter resize constraint on undershoot seems to help
results (especially SSIM) as significant undershoot on a frame
seems to have more of a damaging impact than overshoot.
This patch has been tuned so that in local testing using the
derf set it is encode speed neutral for speed setting 2.
Average quality result for speed 2 (psnr,ssim) were as follows:-
Fixes windows build issue:
==> tests::VS10_x64 is broken
LINK : warning C4742: 'kYvuI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4744: 'kYvuI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4742: 'kYuvI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4744: 'kYuvI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : warning C4742: 'kYvuI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4744: 'kYvuI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4742: 'kYuvI601Constants' has different alignment in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': 32 and 2 [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : warning C4744: 'kYuvI601Constants' has different type in 'third_party\libyuv\source\row_common.cc' and 'third_party\libyuv\source\planar_functions.cc': '__declspec(align(32)) struct (224 bytes)' and 'struct (224 bytes)' [.build-x86_64-win64-vs10\vpxenc.vcxproj]
LINK : error C2220: warning treated as error - no 'executable' file generated [.build-x86_64-win64-vs10\vpxdec.vcxproj]
LINK : error C2220: warning treated as error - no 'executable' file generated [.build-x86_64-win64-vs10\vpxenc.vcxproj]
paulwilkins [Fri, 26 Aug 2016 10:43:47 +0000 (11:43 +0100)]
Add ALLOW_RECODE_FIRST speed mode.
This patch is to address concerns that changes to allow
recodes on the first frame in each ARF group do not give a
good enough speed quality trade off for speed 2. Though the
average impact on encode speed is 1-2%, for some hard clips
it is > 5% rise. For speed 1 this is less an issue and for Speed 0
the previous patch actually improves speed.
Current commit is just an API template for the rest of the code, and
I will add inner logic later.
Altref frames generate a lot of bitrate and at the same time
other frames refer to them a lot, so it makes sense to apply
special compensation-based adaptive quantization scheme for altref
frames. E.g., for blocks that are good predictors for the future
apply rate-control chosen quantizer while for bad predictors apply
worse one.
paulwilkins [Thu, 18 Aug 2016 13:15:25 +0000 (14:15 +0100)]
Adjust coefficient optimization and tx_domain rd speed features.
Previously Tx domain rd was used in all cases above speed 0.
Coefficient optimization was only enabled for best and speed 0.
This patch selectively sets these features at other speed settings
based on block complexity.
For the Netflix and HD sets in particular the quality gains are
large compared to the speed hit. At speed 1 the average psnr
gain in the NF set is > 2.5% with one clip coming in at 18%
and some points almost 30%. Average gains for the lower
resolution test sets are around 1%.
The gains are biggest at low Q so some further optimization
may be possible.
James Zern [Thu, 25 Aug 2016 04:46:26 +0000 (21:46 -0700)]
add_noise,vpx_setup_noise: correct 'char_dist' type
fixes SSE2/AddNoiseTest.CheckCvsAssembly/0 with -funsigned-char.
visibly broken since: 0dc69c7 postproc : fix function parameters for noise functions.
where the types diverged (char vs. int8)
but likely the return changed in: 2ca24b0 postproc - move filling of noise buffer to vpx_dsp.
when multiple implementations were merged.
James Zern [Wed, 24 Aug 2016 04:06:36 +0000 (21:06 -0700)]
vpx_mem: add basic size check
set a max allocable size to prevent overflows in 32-bit and extremely
large allocation attempts in 64-bit. this could be amended to allow size
or num parameters to be 64-bits with the correct size being used at each
call site.
In the future this option will activate adaptive quantization special
for altref frames. Encoder will create the adaptive quantization map
on the basis of lookahead buffers similarity which is the estimate of
the future motion compensation performance.
Johann [Tue, 23 Aug 2016 23:58:07 +0000 (16:58 -0700)]
Remove halfpix specialization
This function only exists as a shortcut to subpixel variance with
predefined offsets. xoffset = 4 for horizontal, yoffset = 4 for vertical
and both for "hv"
Removing this allows the existing optimizations for the variance
functions to be called. Instead of having only sse2 optimizations, this
gives sse2, ssse3, msa and neon.
James Zern [Tue, 23 Aug 2016 22:51:32 +0000 (15:51 -0700)]
vp8: fix decoder crash with invalid leading keyframes
decoding the same invalid keyframe twice would result in a crash as the
second time through the decoder would be assumed to have been
initialized as there was no resolution change. in this case the
resolution was itself invalid (0x6), but vp8_peek_si() was only failing
in the case of 0x0.
invalid-vp80-00-comprehensive-018.ivf.2kf_0x6.ivf tests this case by
duplicating the first keyframe and additionally adds a valid one to
ensure decoding can resume without error.
projects / libvpx / log