Tom Lane [Thu, 22 Mar 2018 21:33:10 +0000 (17:33 -0400)]
Improve style guideline compliance of assorted error-report messages.
Per the project style guide, details and hints should have leading
capitalization and end with a period. On the other hand, errcontext should
not be capitalized and should not end with a period. To support well
formatted error contexts in dblink, extend dblink_res_error() to take a
format+arguments rather than a hardcoded string.
Robert Haas [Thu, 22 Mar 2018 20:09:28 +0000 (16:09 -0400)]
Consider Parallel Append of partial paths for UNION [ALL].
Without this patch, we can implement a UNION or UNION ALL as an
Append where Gather appears beneath one or more of the Append
branches, but this lets us put the Gather node on top, with
a partial path for each relation underneath.
There is considerably more work that could be done to improve
planning in this area, but that will probably need to wait
for a future release.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Tom Lane [Thu, 22 Mar 2018 19:47:29 +0000 (15:47 -0400)]
Sync up our various ways of estimating pg_class.reltuples.
VACUUM thought that reltuples represents the total number of tuples in
the relation, while ANALYZE counted only live tuples. This can cause
"flapping" in the value when background vacuums and analyzes happen
separately. The planner's use of reltuples essentially assumes that
it's the count of live (visible) tuples, so let's standardize on having
it mean live tuples.
Another issue is that the definition of "live tuple" isn't totally clear;
what should be done with INSERT_IN_PROGRESS or DELETE_IN_PROGRESS tuples?
ANALYZE's choices in this regard are made on the assumption that if the
originating transaction commits at all, it will happen after ANALYZE
finishes, so we should ignore the effects of the in-progress transaction
--- unless it is our own transaction, and then we should count it.
Let's propagate this definition into VACUUM, too.
Likewise propagate this definition into CREATE INDEX, and into
contrib/pgstattuple's pgstattuple_approx() function.
Tomas Vondra, reviewed by Haribabu Kommi, some corrections by me
Andres Freund [Thu, 22 Mar 2018 18:45:07 +0000 (11:45 -0700)]
Basic planner and executor integration for JIT.
This adds simple cost based plan time decision about whether JIT
should be performed. jit_above_cost, jit_optimize_above_cost are
compared with the total cost of a plan, and if the cost is above them
JIT is performed / optimization is performed respectively.
For that PlannedStmt and EState have a jitFlags (es_jit_flags) field
that stores information about what JIT operations should be performed.
EState now also has a new es_jit field, which can store a
JitContext. When there are no errors the context is released in
standard_ExecutorEnd().
It is likely that the default values for jit_[optimize_]above_cost
will need to be adapted further, but in my test these values seem to
work reasonably.
Author: Andres Freund, with feedback by Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Andres Freund [Thu, 22 Mar 2018 18:05:22 +0000 (11:05 -0700)]
Support for optimizing and emitting code in LLVM JIT provider.
This commit introduces the ability to actually generate code using
LLVM. In particular, this adds:
- Ability to emit code both in heavily optimized and largely
unoptimized fashion
- Batching facility to allow functions to be defined in small
increments, but optimized and emitted in executable form in larger
batches (for performance and memory efficiency)
- Type and function declaration synchronization between runtime
generated code and normal postgres code. This is critical to be able
to access struct fields etc.
- Developer oriented jit_dump_bitcode GUC, for inspecting / debugging
the generated code.
- per JitContext statistics of number of functions, time spent
generating code, optimizing, and emitting it. This will later be
employed for EXPLAIN support.
This commit doesn't yet contain any code actually generating
functions. That'll follow in later commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with contributions by Pierre Ducroquet Testing-By: Thomas Munro, Peter Eisentraut
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Tom Lane [Thu, 22 Mar 2018 17:23:47 +0000 (13:23 -0400)]
Fix tuple counting in SP-GiST index build.
Count the number of tuples in the index honestly, instead of assuming
that it's the same as the number of tuples in the heap. (It might be
different if the index is partial.)
Tom Lane [Thu, 22 Mar 2018 17:13:58 +0000 (13:13 -0400)]
Fix errors in contrib/bloom index build.
Count the number of tuples in the index honestly, instead of assuming
that it's the same as the number of tuples in the heap. (It might be
different if the index is partial.)
Fix counting of tuples in current index page, too. This error would
have led to failing to write out the final page of the index if it
contained exactly one tuple, so that the last tuple of the relation
would not get indexed.
Robert Haas [Thu, 22 Mar 2018 16:49:48 +0000 (12:49 -0400)]
Implement partition-wise grouping/aggregation.
If the partition keys of input relation are part of the GROUP BY
clause, all the rows belonging to a given group come from a single
partition. This allows aggregation/grouping over a partitioned
relation to be broken down * into aggregation/grouping on each
partition. This should be no worse, and often better, than the normal
approach.
If the GROUP BY clause does not contain all the partition keys, we can
still perform partial aggregation for each partition and then finalize
aggregation after appending the partial results. This is less certain
to be a win, but it's still useful.
Jeevan Chalke, Ashutosh Bapat, Robert Haas. The larger patch series
of which this patch is a part was also reviewed and tested by Antonin
Houska, Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin
Knizhnik, Pascal Legrand, and Rafia Sabih.
Teodor Sigaev [Thu, 22 Mar 2018 14:42:03 +0000 (17:42 +0300)]
Add \if support to pgbench
Patch adds \if to pgbench as it done for psql. Implementation shares condition
stack code with psql, so, this code is moved to fe_utils directory.
Author: Fabien COELHO with minor editorization by me
Review by: Vik Fearing, Fedor Sigaev
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.20.1711252200190.28523@lancre
Dean Rasheed [Thu, 22 Mar 2018 09:37:36 +0000 (09:37 +0000)]
Improve ANALYZE's strategy for finding MCVs.
Previously, a value was included in the MCV list if its frequency was
25% larger than the estimated average frequency of all nonnull values
in the table. For uniform distributions, that can lead to values
being included in the MCV list and significantly overestimated on the
basis of relatively few (sometimes just 2) instances being seen in the
sample. For non-uniform distributions, it can lead to too few values
being included in the MCV list, since the overall average frequency
may be dominated by a small number of very common values, while the
remaining values may still have a large spread of frequencies, causing
both substantial overestimation and underestimation of the remaining
values. Furthermore, increasing the statistics target may have little
effect because the overall average frequency will remain relatively
unchanged.
Instead, populate the MCV list with the largest set of common values
that are statistically significantly more common than the average
frequency of the remaining values. This takes into account the
variance of the sample counts, which depends on the counts themselves
and on the proportion of the table that was sampled. As a result, it
constrains the relative standard error of estimates based on the
frequencies of values in the list, reducing the chances of too many
values being included. At the same time, it allows more values to be
included, since the MCVs need only be more common than the remaining
non-MCVs, rather than the overall average. Thus it tends to produce
fewer MCVs than the previous code for uniform distributions, and more
for non-uniform distributions, reducing estimation errors in both
cases. In addition, the algorithm responds better to increasing the
statistics target, allowing more values to be included in the MCV list
when more of the table is sampled.
Jeff Janes, substantially modified by me. Reviewed by John Naylor and
Tomas Vondra.
Andres Freund [Thu, 22 Mar 2018 02:28:28 +0000 (19:28 -0700)]
Basic JIT provider and error handling infrastructure.
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Tom Lane [Thu, 22 Mar 2018 00:11:07 +0000 (20:11 -0400)]
Prevent extensions from creating custom GUCs that are GUC_LIST_QUOTE.
Pending some solution for the problems noted in commit 742869946,
disallow dynamic creation of GUC_LIST_QUOTE variables.
If there are any extensions out there using this feature, they'd not
be happy for us to start enforcing this rule in minor releases, so
this is a HEAD-only change. The previous commit didn't make things
any worse than they already were for such cases.
Tom Lane [Thu, 22 Mar 2018 00:03:28 +0000 (20:03 -0400)]
Fix mishandling of quoted-list GUC values in pg_dump and ruleutils.c.
Code that prints out the contents of setconfig or proconfig arrays in
SQL format needs to handle GUC_LIST_QUOTE variables differently from
other ones, because for those variables, flatten_set_variable_args()
already applied a layer of quoting. The value can therefore safely
be printed as-is, and indeed must be, or flatten_set_variable_args()
will muck it up completely on reload. For all other GUC variables,
it's necessary and sufficient to quote the value as a SQL literal.
We'd recognized the need for this long ago, but mis-analyzed the
need slightly, thinking that all GUC_LIST_INPUT variables needed
the special treatment. That's actually wrong, since a valid value
of a LIST variable might include characters that need quoting,
although no existing variables accept such values.
More to the point, we hadn't made any particular effort to keep the
various places that deal with this up-to-date with the set of variables
that actually need special treatment, meaning that we'd do the wrong
thing with, for example, temp_tablespaces values. This affects dumping
of SET clauses attached to functions, as well as ALTER DATABASE/ROLE SET
commands.
In ruleutils.c we can fix it reasonably honestly by exporting a guc.c
function that allows discovering the flags for a given GUC variable.
But pg_dump doesn't have easy access to that, so continue the old method
of having a hard-wired list of affected variable names. At least we can
fix it to have just one list not two, and update the list to match
current reality.
A remaining problem with this is that it only works for built-in
GUC variables. pg_dump's list obvious knows nothing of third-party
extensions, and even the "ask guc.c" method isn't bulletproof since
the relevant extension might not be loaded. There's no obvious
solution to that, so for now, we'll just have to discourage extension
authors from inventing custom GUCs that need GUC_LIST_QUOTE.
This has been busted for a long time, so back-patch to all supported
branches.
Michael Paquier and Tom Lane, reviewed by Kyotaro Horiguchi and
Pavel Stehule
Tom Lane [Wed, 21 Mar 2018 22:30:46 +0000 (18:30 -0400)]
Improve predtest.c's handling of cases with NULL-constant inputs.
Currently, if operator_predicate_proof() is given an operator clause like
"something op NULL", it just throws up its hands and reports it can't prove
anything. But we can often do better than that, if the operator is strict,
because then we know that the clause returns NULL overall. Depending on
whether we're trying to prove or refute something, and whether we need
weak or strong semantics for NULL, this may be enough to prove the
implication, especially when we rely on the standard rule that "false
implies anything". In particular, this lets us do something useful with
questions like "does X IN (1,3,5,NULL) imply X <= 5?" The null entry
in the IN list can effectively be ignored for this purpose, but the
proof rules were not previously smart enough to deduce that.
This patch is by me, but it owes something to previous work by
Amit Langote to try to solve problems of the form mentioned.
Thanks also to Emre Hasegeli and Ashutosh Bapat for review.
Tom Lane [Wed, 21 Mar 2018 18:57:12 +0000 (14:57 -0400)]
Change oddly-chosen OID allocation.
I noticed while fooling with John Naylor's bootstrap-data patch that we had
one high-numbered manually assigned OID, 8888, which evidently came from a
submission that the committer didn't bother to bring into line with usual
OID allocation practices before committing. That's a bad idea, because it
creates a hazard for other patches that may be temporarily using high OID
numbers. Change it to something more in line with what we usually do.
This evidently dates to commit abb173392. It's too late to change it
in released branches, but we can fix it in HEAD.
Peter Eisentraut [Wed, 21 Mar 2018 16:14:53 +0000 (12:14 -0400)]
pg_controldata: Prevent division-by-zero errors
If the control file is corrupted and specifies the WAL segment size
to be 0 bytes, calculating the latest checkpoint's REDO WAL file
will fail with a division-by-zero error. Show it as "???" instead.
Also reword the warning message a bit and send it to stdout, like the
other pre-existing warning messages.
Add some tests for dealing with a corrupted pg_control file.
Author: Nathan Bossart <bossartn@amazon.com>, tests by me
Alvaro Herrera [Wed, 21 Mar 2018 15:03:35 +0000 (12:03 -0300)]
Fix relcache handling of the 'default' partition
My commit 4dba331cb3dc that moved around CommandCounterIncrement calls
in partitioning DDL code unearthed a problem with the relcache handling
for the 'default' partition: the construction of a correct relcache
entry for the partitioned table was at the mercy of lack of CCI calls in
non-trivial amounts of code. This was prone to creating problems later
on, as the code develops. This was visible as a test failure in a
compile with RELCACHE_FORCE_RELASE (buildfarm member prion).
The problem is that after the mentioned commit it was possible to create
a relcache entry that had incomplete information regarding the default
partition because I introduced a CCI between adding the catalog entries
for the default partition (StorePartitionBound) and the update of
pg_partitioned_table entry for its parent partitioned table
(update_default_partition_oid). It seems the best fix is to move the
latter so that it occurs inside the former; the purposeful lack of
intervening CCI should be more obvious, and harder to break.
I also remove a check in RelationBuildPartitionDesc that returns NULL if
the key is not set. I couldn't find any place that needs this hack
anymore; probably it was required because of bugs that have since been
fixed.
Fix a few typos I noticed while reviewing the code involved.
Teodor Sigaev [Wed, 21 Mar 2018 15:01:23 +0000 (18:01 +0300)]
Add general purpose hasing functions to pgbench.
Hashing function is useful for simulating real-world workload in test like
WEB workload, as an example - YCSB benchmarks.
Author: Ildar Musin with minor editorization by me
Reviewed by: Fabien Coelho, me
Discussion: https://www.postgresql.org/message-id/flat/0e8bd39e-dfcd-2879-f88f-272799ad7ef2@postgrespro.ru
Peter Eisentraut [Wed, 21 Mar 2018 13:13:24 +0000 (09:13 -0400)]
Handle heap rewrites even better in logical decoding
Logical decoding should not publish anything about tables created as
part of a heap rewrite during DDL. Those tables don't exist externally,
so consumers of logical decoding cannot do anything sensible with that
information. In ab28feae2bd3d4629bd73ae3548e671c57d785f0, we worked
around this for built-in logical replication, but that was hack.
This is a more proper fix: We mark such transient heaps using the new
field pg_class.relwrite, linking to the original relation OID. By
default, we ignore them in logical decoding before they get to the
output plugin. Optionally, a plugin can register their interest in
getting such changes, if they handle DDL specially, in which case the
new field will help them get information about the actual table.
Teodor Sigaev [Wed, 21 Mar 2018 11:57:42 +0000 (14:57 +0300)]
Add strict_word_similarity to pg_trgm module
strict_word_similarity is similar to existing word_similarity function but
it takes into account word boundaries to compute similarity.
Author: Alexander Korotkov
Review by: David Steele, Liudmila Mantrova, me
Discussion: https://www.postgresql.org/message-id/flat/CY4PR17MB13207ED8310F847CF117EED0D85A0@CY4PR17MB1320.namprd17.prod.outlook.com
Andrew Gierth [Wed, 21 Mar 2018 10:42:04 +0000 (10:42 +0000)]
Repair crash with unsortable grouping sets.
If there were multiple grouping sets, none of them empty, all of which
were unsortable, then an oversight in consider_groupingsets_paths led
to a null pointer dereference. Fix, and add a regression test for this
case.
Per report from Dang Minh Huong, though I didn't use their patch.
Backpatch to 10.x where hashed grouping sets were added.
Teodor Sigaev [Wed, 21 Mar 2018 11:35:56 +0000 (14:35 +0300)]
Rework word_similarity documentation, make it close to actual algorithm.
word_similarity before claimed as returning similarity of closest word in
string, but, actually it returns similarity of substring. Also fix mistyped
comments.
Author: Alexander Korotkov
Review by: David Steele, Liudmila Mantrova
Discussionis:
https://www.postgresql.org/message-id/flat/CY4PR17MB13207ED8310F847CF117EED0D85A0@CY4PR17MB1320.namprd17.prod.outlook.com
https://www.postgresql.org/message-id/flat/f43b242d-000c-f4c8-cb8b-d37e9752cd93%40postgrespro.ru
Andres Freund [Tue, 20 Mar 2018 22:41:15 +0000 (15:41 -0700)]
Add C++ support to configure.
This is an optional dependency. It'll be used for the upcoming LLVM
based just in time compilation support, which needs to wrap a few LLVM
C++ APIs so they're accessible from C..
For now test for C++ compilers unconditionally, without failing if not
present, to ensure wide buildfarm coverage. If we're bothered by the
additional test times (which are quite short) or verbosity, we can
later make the tests conditional on --with-llvm.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Peter Eisentraut [Tue, 20 Mar 2018 20:44:52 +0000 (16:44 -0400)]
Attempt to fix build with unusual OpenSSL versions
Since e3bdb2d92600ed45bd46aaf48309a436a9628218, libpq failed to build on
some platforms because they did not have SSL_clear_options(). Although
mainline OpenSSL introduced SSL_clear_options() after
SSL_OP_NO_COMPRESSION, so the code should have built fine, at least an
old NetBSD version (build farm "coypu" NetBSD 5.1 gcc 4.1.3 PR-20080704
powerpc) has SSL_OP_NO_COMPRESSION but no SSL_clear_options().
So add a configure check for SSL_clear_options(). If we don't find it,
skip the call. That means on such a platform one cannot *enable* SSL
compression if the built-in default is off, but that seems an unlikely
combination anyway and not very interesting in practice.
Andres Freund [Tue, 20 Mar 2018 19:58:08 +0000 (12:58 -0700)]
Add PGAC_PROG_VARCC_VARFLAGS_OPT autoconf macro.
The new macro allows to test flags for different compilers and to
store them in different CFLAG like variables. The existing
PGAC_PROG_CC_CFLAGS_OPT and PGAC_PROG_CC_VAR_OPT are changed to be
just wrappers around the new function.
This'll be used by the upcoming LLVM support, to separately detect
capabilities used by clang, when generating bitcode.
Author: Andres Freund
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
Tom Lane [Tue, 20 Mar 2018 19:16:16 +0000 (15:16 -0400)]
Make configure check for a couple more Perl modules for --enable-tap-tests.
Red Hat's notion of a basic Perl installation doesn't include Test::More
or Time::HiRes, and reportedly some Debian installs also omit Time::HiRes.
Check for those during configure to spare the user the pain of digging
through check-world output to find out what went wrong. While we're at it,
we should also check the version of Test::More, since TestLib.pm requires
at least 0.87.
In principle this could be back-patched, but it's probably not necessary.
Robert Haas [Tue, 20 Mar 2018 15:33:44 +0000 (11:33 -0400)]
Don't pass the grouping target around unnecessarily.
Since commit 4f15e5d09de276fb77326be5567dd9796008ca2e made grouped_rel
set reltarget, a variety of other functions can just get it from
grouped_rel instead of having to pass it around explicitly. Simplify
accordingly.
Robert Haas [Tue, 20 Mar 2018 15:31:06 +0000 (11:31 -0400)]
Determine grouping strategies in create_grouping_paths.
Partition-wise aggregate will call create_ordinary_grouping_paths
multiple times and we don't want to redo this work every time; have
the caller do it instead and pass the details down.
Robert Haas [Tue, 20 Mar 2018 15:18:04 +0000 (11:18 -0400)]
Defer creation of partially-grouped relation until it's needed.
This avoids unnecessarily creating a RelOptInfo for which we have no
actual need. This idea is from Ashutosh Bapat, who wrote a very
different patch to accomplish a similar goal. It will be more
important if and when we get partition-wise aggregate, since then
there could be many partially grouped relations all of which could
potentially be unnecessary. In passing, this sets the grouping
relation's reltarget, which wasn't done previously but makes things
simpler for this refactoring.
Along the way, adjust things so that add_paths_to_partial_grouping_rel,
now renamed create_partial_grouping_paths, does not perform the Gather
or Gather Merge steps to generate non-partial paths from partial
paths; have the caller do it instead. This is again for the
convenience of partition-wise aggregate, which wants to inject
additional partial paths are created and before we decide which ones
to Gather/Gather Merge. This might seem like a separate change, but
it's actually pretty closely entangled; I couldn't really see much
value in separating it and having to change some things twice.
Alvaro Herrera [Tue, 20 Mar 2018 14:19:41 +0000 (11:19 -0300)]
Fix CommandCounterIncrement in partition-related DDL
It makes sense to do the CCIs in the places that do catalog updates,
rather than before the places that error out because the former ones
fail to do it. In particular, it looks like StorePartitionBound() and
IndexSetParentIndex() ought to make their own CCIs.
Per review comments from Peter Eisentraut for row-level triggers on
partitioned tables.
Tom Lane [Tue, 20 Mar 2018 03:59:17 +0000 (23:59 -0400)]
Prevent query-lifespan memory leakage of SP-GiST traversal values.
The original coding of the SP-GiST scan traversalValue feature (commit ccd6eb49a) arranged for traversal values to be stored in the query's main
executor context. That's fine if there's only one index scan per query,
but if there are many, we have a memory leak as successive scans create
new traversal values. Fix it by creating a separate memory context for
traversal values, which we can reset during spgrescan(). Back-patch
to 9.6 where this code was introduced.
In principle, adding the traversalCxt field to SpGistScanOpaqueData
creates an ABI break in the back branches. But I (tgl) have little
sympathy for extensions including spgist_private.h, so I'm not very
worried about that. Alternatively we could stick the new field at the
end of the struct in back branches, but that has its own downsides.
Tom Lane [Mon, 19 Mar 2018 22:49:53 +0000 (18:49 -0400)]
Fix some corner-case issues in REFRESH MATERIALIZED VIEW CONCURRENTLY.
refresh_by_match_merge() has some issues in the way it builds a SQL
query to construct the "diff" table:
1. It doesn't require the selected unique index(es) to be indimmediate.
2. It doesn't pay attention to the particular equality semantics enforced
by a given index, but just assumes that they must be those of the column
datatype's default btree opclass.
3. It doesn't check that the indexes are btrees.
4. It's insufficiently careful to ensure that the parser will pick the
intended operator when parsing the query. (This would have been a
security bug before CVE-2018-1058.)
5. It's not careful about indexes on system columns.
The way to fix #4 is to make use of the existing code in ri_triggers.c
for generating an arbitrary binary operator clause. I chose to move
that to ruleutils.c, since that seems a more reasonable place to be
exporting such functionality from than ri_triggers.c.
While #1, #3, and #5 are just latent given existing feature restrictions,
and #2 doesn't arise in the core system for lack of alternate opclasses
with different equality behaviors, #4 seems like an issue worth
back-patching. That's the bulk of the change anyway, so just back-patch
the whole thing to 9.4 where this code was introduced.
Andrew Dunstan [Mon, 19 Mar 2018 21:55:36 +0000 (08:25 +1030)]
Don't use an Msys virtual path to create a tablespace
The new unlogged_reinit recovery tests create a new tablespace using
TestLib.pm's tempdir. However, on msys that function returns a virtual
path that isn't understood by Postgres. Here we add a new function to
TestLib.pm to turn such a path into a real path on the underlying file
system, and use it in the new test to create the tablespace. The new
function is essentially a NOOP everywhere but msys.
Tom Lane [Mon, 19 Mar 2018 21:23:07 +0000 (17:23 -0400)]
Fix performance hazard in REFRESH MATERIALIZED VIEW CONCURRENTLY.
Jeff Janes discovered that commit 7ca25b7de made one of the queries run by
REFRESH MATERIALIZED VIEW CONCURRENTLY perform badly. The root cause is
bad cardinality estimation for correlated quals, but a principled solution
to that problem is some way off, especially since the planner lacks any
statistics about whole-row variables. Moreover, in non-error cases this
query produces no rows, meaning it must be run to completion; but use of
LIMIT 1 encourages the planner to pick a fast-start, slow-completion plan,
exactly not what we want. Remove the LIMIT clause, and instead rely on
the count parameter we pass to SPI_execute() to prevent excess work if the
query does return some rows.
While we've heard no field reports of planner misbehavior with this query,
it could be that people are having performance issues that haven't reached
the level of pain needed to cause a bug report. In any case, that LIMIT
clause can't possibly do anything helpful with any existing version of the
planner, and it demonstrably can cause bad choices in some cases, so
back-patch to 9.4 where the code was introduced.
Alvaro Herrera [Mon, 19 Mar 2018 20:43:57 +0000 (17:43 -0300)]
Fix state reversal after partition tuple routing
We make some changes to ModifyTableState and the EState it uses whenever
we route tuples to partitions; but we weren't restoring properly in all
cases, possibly causing crashes when partitions with different tuple
descriptors are targeted by tuples inserted in the same command.
Refactor some code, creating ExecPrepareTupleRouting, to encapsulate the
needed state changing logic, and have it invoked one level above its
current place (ie. put it in ExecModifyTable instead of ExecInsert);
this makes it all more readable.
Add a test case to exercise this.
We don't support having views as partitions; and since only views can
have INSTEAD OF triggers, there is no point in testing for INSTEAD OF
when processing insertions into a partitioned table. Remove code that
appears to support this (but which is actually never relevant.)
In passing, fix location of some very confusing comments in
ModifyTableState.
Reported-by: Amit Langote
Author: Etsuro Fujita, Amit Langote
Discussion: https://postgr/es/m/0473bf5c-57b1-f1f7-3d58-455c2230bc5f@lab.ntt.co.jp
Robert Haas [Mon, 19 Mar 2018 15:55:38 +0000 (11:55 -0400)]
Generate a separate upper relation for each stage of setop planning.
Commit 3fc6e2d7f5b652b417fa6937c34de2438d60fa9f made setop planning
stages return paths rather than plans, but all such paths were loosely
associated with a single RelOptInfo, and only the final path was added
to the RelOptInfo. Even at the time, it was foreseen that this should
be changed, because there is otherwise no good way for a single stage
of setop planning to return multiple paths. With this patch, each
stage of set operation planning now creates a separate RelOptInfo;
these are distinguished by using appropriate relid sets. Note that
this patch does nothing whatsoever about actually returning multiple
paths for the same set operation; it just makes it possible for a
future patch to do so.
Along the way, adjust things so that create_upper_paths_hook is called
for each of these new RelOptInfos rather than just once, since that
might be useful to extensions using that hook. It might be a good
to provide an FDW API here as well, but I didn't try to do that for
now.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Robert Haas [Mon, 19 Mar 2018 15:54:56 +0000 (11:54 -0400)]
Rewrite recurse_union_children to iterate, rather than recurse.
Also, rename it to plan_union_chidren, so the old name wasn't
very descriptive. This results in a small net reduction in code,
seems at least to me to be easier to understand, and saves
space on the process stack.
Patch by me, reviewed and tested by Ashutosh Bapat and Rajkumar
Raghuwanshi.
Tom Lane [Sun, 18 Mar 2018 19:10:28 +0000 (15:10 -0400)]
Doc: note that statement-level view triggers require an INSTEAD OF trigger.
If a view lacks an INSTEAD OF trigger, DML on it can only work by rewriting
the command into a command on the underlying base table(s). Then we will
fire triggers attached to those table(s), not those for the view. This
seems appropriate from a consistency standpoint, but nowhere was the
behavior explicitly documented, so let's do that.
There was some discussion of throwing an error or warning if a statement
trigger is created on a view without creating a row INSTEAD OF trigger.
But a simple implementation of that would result in dump/restore ordering
hazards. Given that it's been like this all along, and we hadn't heard
a complaint till now, a documentation improvement seems sufficient.
Per bug #15106 from Pu Qun. Back-patch to all supported branches.
Magnus Hagander [Sun, 18 Mar 2018 12:08:25 +0000 (13:08 +0100)]
Fix pg_recvlogical for pre-10 versions
In e170b8c8, protection against modified search_path was added. However,
PostgreSQL versions prior to 10 does not accept SQL commands over a
replication connection, so the protection would generate a syntax error.
Since we cannot run SQL commands on it, we are also not vulnerable to
the issue that e170b8c8 fixes, so we can just skip this command for
older versions.
Tom Lane [Sat, 17 Mar 2018 19:38:15 +0000 (15:38 -0400)]
Fix overflow handling in plpgsql's integer FOR loops.
The test to exit the loop if the integer control value would overflow
an int32 turns out not to work on some ICC versions, as it's dependent
on the assumption that the compiler will execute the code as written
rather than "optimize" it. ICC lacks any equivalent of gcc's -fwrapv
switch, so it was optimizing on the assumption of no integer overflow,
and that breaks this. Rewrite into a form that in fact does not
do any overflowing computations.
Per Tomas Vondra and buildfarm member fulmar. It's been like this
for a long time, although it was not till we added a regression test
case covering the behavior (in commit dd2243f2a) that the problem
became apparent. Back-patch to all supported versions.
Tom Lane [Sat, 17 Mar 2018 18:59:31 +0000 (14:59 -0400)]
Fix WHERE CURRENT OF when the referenced cursor uses an index-only scan.
"UPDATE/DELETE WHERE CURRENT OF cursor_name" failed, with an error message
like "cannot extract system attribute from virtual tuple", if the cursor
was using a index-only scan for the target table. Fix it by digging the
current TID out of the indexscan state.
It seems likely that the same failure could occur for CustomScan plans
and perhaps some FDW plan types, so that leaving this to be treated as an
internal error with an obscure message isn't as good an idea as it first
seemed. Hence, add a bit of heaptuple.c infrastructure to let us deliver
a more on-topic message. I chose to make the message match what you get
for the case where execCurrentOf can't identify the target scan node at
all, "cursor "foo" is not a simply updatable scan of table "bar"".
Perhaps it should be different, but we can always adjust that later.
In the future, it might be nice to provide hooks that would let custom
scan providers and/or FDWs deal with this in other ways; but that's
not a suitable topic for a back-patchable bug fix.
It's been like this all along, so back-patch to all supported branches.
Peter Eisentraut [Sat, 17 Mar 2018 12:56:50 +0000 (08:56 -0400)]
Set libpq sslcompression to off by default
Since SSL compression is no longer recommended, turn the default in
libpq from on to off.
OpenSSL 1.1.0 and many distribution packages already turn compression
off by default, so such a server won't accept compression anyway. So
this will mainly affect users of older OpenSSL installations.
Also update the documentation to make clear that this setting is no
longer recommended.
Peter Eisentraut [Mon, 26 Feb 2018 18:28:38 +0000 (13:28 -0500)]
Add ssl_passphrase_command setting
This allows specifying an external command for prompting for or
otherwise obtaining passphrases for SSL key files. This is useful
because in many cases there is no TTY easily available during service
startup.
Also add a setting ssl_passphrase_command_supports_reload, which allows
supporting SSL configuration reload even if SSL files need passphrases.
Andres Freund [Sat, 17 Mar 2018 06:13:12 +0000 (23:13 -0700)]
Make ExplainPropertyInteger accept 64bit input, remove *Long variant.
'long' is not useful type across platforms, as it's 32bit on 32 bit
platforms, and even on some 64bit platforms (e.g. windows) it's still
only 32bits wide.
As ExplainPropertyInteger should never be performance critical, change
it to accept a 64bit argument and remove ExplainPropertyLong.
Author: Andres Freund
Discussion: https://postgr.es/m/20180314164832.n56wt7zcbpzi6zxe@alap3.anarazel.de
Tom Lane [Fri, 16 Mar 2018 20:03:45 +0000 (16:03 -0400)]
Fix query-lifespan memory leakage in repeatedly executed hash joins.
ExecHashTableCreate allocated some memory that wasn't freed by
ExecHashTableDestroy, specifically the per-hash-key function information.
That's not a huge amount of data, but if one runs a query that repeats
a hash join enough times, it builds up. Fix by arranging for the data
in question to be kept in the hashtable's hashCxt instead of leaving it
"loose" in the query-lifespan executor context. (This ensures that we'll
also clean up anything that the hash functions allocate in fn_mcxt.)
Per report from Amit Khandekar. It's been like this forever, so back-patch
to all supported branches.
Tom Lane [Fri, 16 Mar 2018 17:44:34 +0000 (13:44 -0400)]
Doc: explicitly point out that enum values can't be dropped.
This was not stated in so many words anywhere. Document it to make
clear that it's a design limitation and not just an oversight or
documentation omission.
Peter Eisentraut [Sat, 17 Feb 2018 01:44:15 +0000 (20:44 -0500)]
Rename TransactionChain functions
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Tom Lane [Fri, 16 Mar 2018 16:48:13 +0000 (12:48 -0400)]
Mop-up for letting VOID-returning SQL functions end with a SELECT.
Part of the intent in commit fd1a421fe was to allow SQL functions that are
declared to return VOID to contain anything, including an unrelated final
SELECT, the same as SQL-language procedures can. However, the planner's
inlining logic didn't get that memo. Fix it, and add some regression tests
covering this area, since evidently we had none.
In passing, clean up some typos in comments in create_function_3.sql,
and get rid of its none-too-safe assumption that DROP CASCADE notice
output is immutably ordered.
Tom Lane [Thu, 15 Mar 2018 21:08:51 +0000 (17:08 -0400)]
Clean up duplicate table and function names in regression tests.
Many of the objects we create during the regression tests are put in the
public schema, so that using the same names in different regression tests
creates a hazard of test failures if any two such scripts run concurrently.
This patch cleans up a bunch of latent hazards of that sort, as well as two
live hazards.
The current situation in this regard is far worse than it was a year or two
back, because practically all of the partitioning-related test cases have
reused table names with enthusiasm. I despaired of cleaning up that mess
within the five most-affected tests (create_table, alter_table, insert,
update, inherit); fortunately those don't run concurrently.
Other than partitioning problems, most of the issues boil down to using
names like "foo", "bar", "tmp", etc, without thought for the fact that
other test scripts might use similar names concurrently. I've made an
effort to make all such names more specific.
One of the live hazards was that commit 7421f4b8 caused with.sql to
create a table named "test", conflicting with a similarly-named table
in alter_table.sql; this was exposed in the buildfarm recently.
The other one was that join.sql and transactions.sql both create tables
named "foo" and "bar"; but join.sql's uses of those names date back
only to December or so.
Since commit 7421f4b8 was back-patched to v10, back-patch a minimal
fix for that problem. The rest of this is just future-proofing.
Robert Haas [Thu, 15 Mar 2018 18:43:58 +0000 (14:43 -0400)]
Split create_grouping_paths into degenerate and non-degenerate cases.
There's no functional change here, or at least I hope there isn't,
just code rearrangement. The rearrangement is motivated by
partition-wise aggregate, which doesn't need to consider the
degenerate case but wants to reuse the logic for the ordinary case.
Based loosely on a patch from Ashutosh Bapat and Jeevan Chalke, but I
whacked it around pretty heavily. The larger patch series of which
this patch is a part was also reviewed and tested by Antonin Houska,
Rajkumar Raghuwanshi, David Rowley, Dilip Kumar, Konstantin Knizhnik,
Pascal Legrand, Rafia Sabih, and me.
Tom Lane [Thu, 15 Mar 2018 18:00:31 +0000 (14:00 -0400)]
Clean up duplicate role and schema names in regression tests.
Since these names are global, using the same ones in different regression
tests creates a hazard of test failures if any two such scripts run
concurrently. Let's establish a policy of not doing that. In the cases
where a conflict existed, I chose to rename both sides: in principle one
script or the other could've been left in possession of the common name,
but that seems to just invite more trouble of the same sort.
There are a number of places where scripts are using names that seem
unduly generic, but in the absence of actual conflicts I left them alone.
In addition, fix insert.sql's use of "someone_else" as a role name.
That's a flat out violation of longstanding project policy, so back-patch
that change to v10 where the usage appeared. The rest of this is just
future-proofing, as no two of these scripts are actually run concurrently
in the existing parallel_schedule.
Conflicts of schema-qualified names also exist, but will be dealt with
separately.
Peter Eisentraut [Thu, 15 Mar 2018 15:10:41 +0000 (11:10 -0400)]
Fix more format truncation issues
Fix the warnings created by the compiler warning options
-Wformat-overflow=2 -Wformat-truncation=2, supported since GCC 7. This
is a more aggressive variant of the fixes in 6275f5d28a1577563f53f2171689d4f890a46881, which GCC 7 warned about by
default.
The issues are all harmless, but some dubious coding patterns are
cleaned up.
One issue that is of external interest is that BGW_MAXLEN is increased
from 64 to 96. Apparently, the old value would cause the bgw_name of
logical replication workers to be truncated in some circumstances.
But this doesn't actually add those warning options. It appears that
the warnings depend a bit on compilation and optimization options, so it
would be annoying to have to keep up with that. This is more of a
once-in-a-while cleanup.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Robert Haas [Thu, 15 Mar 2018 15:33:52 +0000 (11:33 -0400)]
Pass additional arguments to a couple of grouping-related functions.
get_number_of_groups() and make_partial_grouping_target() currently
fish information directly out of the PlannerInfo; in the former case,
the target list, and in the latter case, the HAVING qual. This works
fine if there's only one grouping relation, but if the pending patch
for partition-wise aggregate gets committed, we'll have multiple
grouping relations and must therefore use appropriately translated
versions of these values for each one. To make that simpler, pass the
values to be used as arguments.
Jeevan Chalke. The larger patch series of which this patch is a part
was also reviewed and tested by Antonin Houska, Rajkumar Raghuwanshi,
David Rowley, Dilip Kumar, Konstantin Knizhnik, Pascal Legrand, Rafia
Sabih, and me.
Alvaro Herrera [Thu, 15 Mar 2018 12:51:12 +0000 (09:51 -0300)]
test_ddl_deparse: Don't use pg_class as source for a matview
Doing so causes a pg_upgrade of a database containing these objects to
fail whenever pg_class changes. And it's pointless anyway: we have more
interesting tables anyhow.
Alvaro Herrera [Thu, 15 Mar 2018 00:34:26 +0000 (21:34 -0300)]
logical replication: fix OID type mapping mechanism
The logical replication type map seems to have been misused by its only
caller -- it would try to use the remote OID as input for local type
routines, which unsurprisingly could result in bogus "cache lookup
failed for type XYZ" errors, or random other type names being picked up
if they happened to use the right OID. Fix that, changing
Oid logicalrep_typmap_getid(Oid remoteid) to
char *logicalrep_typmap_gettypname(Oid remoteid)
which is more useful. If the remote type is not part of the typmap,
this simply prints "unrecognized type" instead of choking trying to
figure out -- a pointless exercise (because the only input for that
comes from replication messages, which are not under the local node's
control) and dangerous to boot, when called from within an error context
callback.
Once that is done, it comes to light that the local OID in the typmap
entry was not being used for anything; the type/schema names are what we
need, so remove local type OID from that struct.
Once you do that, it becomes pointless to attach a callback to regular
syscache invalidation. So remove that also.
Peter Eisentraut [Wed, 14 Mar 2018 18:59:40 +0000 (14:59 -0400)]
Remove pg_class.relhaspkey
It is not used for anything internally, and it cannot be relied on for
external uses, so it can just be removed. To correct recommended way to
check for a primary key is in pg_index.
Stephen Frost [Wed, 14 Mar 2018 17:51:15 +0000 (13:51 -0400)]
Fix function-header comments in planner.c
In b5635948ab1, a couple of function header comments weren't changed, or
weren't changed correctly, to reflect the arguments being passed into
the functions. Specifically, get_number_of_groups() had the wrong
argument name in the commit and create_grouping_paths() wasn't
updated even though the arguments had been changed.
The issue with create_grouping_paths() was noticed by Ashutosh Bapat,
while I discovered the issue with get_number_of_groups() by looking to
see if there were any similar issues from that commit.
Peter Eisentraut [Wed, 14 Mar 2018 15:47:21 +0000 (11:47 -0400)]
Support INOUT arguments in procedures
In a top-level CALL, the values of INOUT arguments will be returned as a
result row. In PL/pgSQL, the values are assigned back to the input
arguments. In other languages, the same convention as for return a
record from a function is used. That does not require any code changes
in the PL implementations.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Alvaro Herrera [Wed, 14 Mar 2018 14:53:56 +0000 (11:53 -0300)]
Log when a BRIN autosummarization request fails
Autovacuum's 'workitem' request queue is of limited size, so requests
can fail if they arrive more quickly than autovacuum can process them.
Emit a log message when this happens, to provide better visibility of
this.
Backpatch to 10. While this represents an API change for
AutoVacuumRequestWork, that function is not yet prepared to deal with
external modules calling it, so there doesn't seem to be any risk (other
than log spam, that is.)
Andres Freund [Fri, 9 Mar 2018 01:07:16 +0000 (17:07 -0800)]
Expand AND/OR regression tests around NULL handling.
Previously there were no tests verifying that NULL handling in AND/OR
was correct (i.e. that NULL rather than false is returned if
expression doesn't return true).
Robert Haas [Tue, 13 Mar 2018 20:34:08 +0000 (16:34 -0400)]
Let Parallel Append over simple UNION ALL have partial subpaths.
A simple UNION ALL gets flattened into an appendrel of subquery
RTEs, but up until now it's been impossible for the appendrel to use
the partial paths for the subqueries, so we can implement the
appendrel as a Parallel Append but only one with non-partial paths
as children.
There are three separate obstacles to removing that limitation.
First, when planning a subquery, propagate any partial paths to the
final_rel so that they are potentially visible to outer query levels
(but not if they have initPlans attached, because that wouldn't be
safe). Second, after planning a subquery, propagate any partial paths
for the final_rel to the subquery RTE in the outer query level in the
same way we do for non-partial paths. Third, teach finalize_plan() to
account for the possibility that the fake parameter we use for rescan
signalling when the plan contains a Gather (Merge) node may be
propagated from an outer query level.
Patch by me, reviewed and tested by Amit Khandekar, Rajkumar
Raghuwanshi, and Ashutosh Bapat. Test cases based on examples by
Rajkumar Raghuwanshi.
projects / postgresql / log