Zachary Turner [Mon, 2 Mar 2015 04:39:56 +0000 (04:39 +0000)]
[llvm-pdbdump] Many minor fixes and improvements
A short list of some of the improvements:
1) Now supports -all command line argument, which implies many
other command line arguments to simplify usage.
2) Now supports -no-compiler-generated command line argument to
exclude compiler generated types.
3) Prints base class list.
4) -class-definitions implies -types.
5) Proper display of bitfields.
6) Can now distinguish between struct/class/interface/union.
Adrian Prantl [Mon, 2 Mar 2015 02:38:18 +0000 (02:38 +0000)]
Refactor DebugLocDWARFExpression so it doesn't require access to the
TargetRegisterInfo. DebugLocEntry now holds a buffer with the raw bytes
of the pre-calculated DWARF expression.
Ought to be NFC, but it does slightly alter the output format of the
textual assembly.
Sanjoy Das [Mon, 2 Mar 2015 00:17:18 +0000 (00:17 +0000)]
[AArch64] fix an invalid-iterator-use bug.
Summary:
In AArch64PromoteConstant::appendAndTransferDominatedUses,
`InsertPts[NewPt]` invalidates IPI. Therefore, `InsertPts[NewPt] =
std::move(IPI->second)` is not legal.
This was caught by running `make check` with
http://reviews.llvm.org/D7931.
Sanjoy Das [Sun, 1 Mar 2015 23:36:26 +0000 (23:36 +0000)]
Revert some changes that were made to fix PR20680.
Summary:
As far as I can tell, the real bug causing the issue was fixed in
r230533. SCEVExpander should mark an increment operation as nuw or nsw
only if it can *prove* that the operation does not overflow. There
shouldn't be any situation where we have to do something different
because of no-wrap flags generated by SCEVExpander.
Revert "IndVarSimplify: Allow LFTR to fire more often"
Benjamin Kramer [Sun, 1 Mar 2015 23:35:20 +0000 (23:35 +0000)]
ArrayRef: Put back std::equal for operator== with a check for the empty ArrayRefs
This has the nice property of compiling down to memcmp when feasible. An empty
ArrayRef can have a nullptr in its Data field. I didn't find anything in the
standard speaking against std::equal(nullptr, nullptr, nullptr) begin valid but
MSVC asserts. The way libstdc++ lowers std::equal down to memcmp also makes
invoking std::equal with a nullptr undefined behavior so checking is the only
way to be safe.
The extra check doesn't cost us perf either because we're essentially peeling
the loop header away from the rotated loop.
Benjamin Kramer [Sun, 1 Mar 2015 21:05:05 +0000 (21:05 +0000)]
ArrayRef: Remove the equals helper with many arguments.
With initializer lists there is a really neat idiomatic way to write
this, 'ArrayRef.equals({1, 2, 3, 4, 5})'. Remove the equal method which
always had a hard limit on the number of arguments. I considered
rewriting it with variadic templates but that's not really a good fit
for a function with homogeneous arguments.
'ArrayRef == {1, 2, 3, 4, 5}' would've been even more awesome, but C++11
doesn't allow init lists with binary operators.
[PBQP] Do not add an edge between nodes with totally disjoint allowed registers
Such edges are zero matrix, and they bring no additional info to the
allocation problem, apart from contributing to nodes' degree. Removing
those edges is expected to improve allocation time.
Tune the spill cost comparison, as this gives better average performances
now that the nodes' degrees has changed.
Benjamin Kramer [Sun, 1 Mar 2015 18:10:07 +0000 (18:10 +0000)]
Make VTs and UnicodeCharSet ctors constexpr if the compiler supports it.
There are static variables of this around that we really want to go
into a read-only segment. Sadly compilers are not smart enough to figure
that out without constexpr.
r228631 stopped using `DW_OP_piece` inside `DIExpression`s in the IR,
but it apparently missed updating these testcases. Caught by verifier
checks for `MDExpression` while working on moving the new hierarchy into
place.
!1 has a wrapper class called `DIFile` which inherits from `DIScope` and
is referenced in 'scope' fields.
!0 is called a "file node", and debug info nodes with a 'file' field
point at one of these directly -- although they're built in `DIBuilder`
by sending in a `DIFile` and reaching into it.
In the new hierarchy, I unified these nodes as `MDFile` (which `DIFile`
is a lightweight wrapper for) in r230057. Moving the new hierarchy into
place (and upgrading testcases) caused CodeGen/X86/unknown-location.ll
to start failing -- apparently "0x29" was previously showing up in the
linetable as a filename, causing:
.loc 2 4 3
(where 2 points at filename "0x29") instead of:
.loc 1 4 3
(where 1 points at the actual filename).
Change the testcase to use the old schema correctly.
DebugInfo: Use TempMDNode in DIDescriptor::replaceAllUsesWith()
Start using `TempMDNode` in `DIDescriptor::replaceAllUsesWith()`
(effectively `std::unique_ptr<MDNode, MDNode::deleteTemporary>`).
Besides making ownership more explicit, this prepares for when
`DIDescriptor` refers to nodes that are *not* `MDTuple`. The old logic
for "replacing" a node with itself used `MDNode::get()` to return a new
(uniqued) `MDTuple`, while the new logic just defers to
`MDNode::replaceWithUniqued()` (which also typically saves an allocation
and RAUW traffic by mutating the temporary in place).
While gaining practical experience hand-updating CHECK lines (for moving
the new debug info hierarchy into place), I learnt a few things about
CHECK-ability of the specialized node assembly output.
- The first part of a `CHECK:` is to identify the "right" node (this
is especially true if you intend to use the new `CHECK-SAME`
feature, since the first CHECK needs to identify the node correctly
before you can split the line).
- If there's a `tag:`, it should go first.
- If there's a `name:`, it should go next (followed by the
`linkageName:`, if any).
- If there's a `scope:`, it should follow after that.
- When a node type supports multiple DW_TAGs, but one is implied by
its name and is overwhelmingly more common, the `tag:` field is
terribly uninteresting unless it's different.
- `MDBasicType` is almost always `DW_TAG_base_type`.
- `MDTemplateValueParameter` is almost always
`DW_TAG_template_value_parameter`.
- Printing `name: ""` doesn't improve CHECK-ability, and there are far
more nodes than I realized that are commonly nameless.
- There are a few other fields that similarly aren't very interesting
when they're empty.
This commit updates the `AsmWriter` as suggested above (and makes
necessary changes in `LLParser` for round-tripping).
Properly escape string fields in metadata. I've added a spot-check with
direct coverage for `MDFile::getFilename()`, but we'll get more coverage
once the hierarchy is moved into place (since this comes up in various
checked-in testcases).
I've replicated the `if` logic using the `ShouldSkipEmpty` flag
(although a follow-up commit is going to change how often this flag is
specified); no NFCI other than escaping the string fields.
Extract logic for escaping a string field in the new debug info
hierarchy from `GenericDebugNode`. A follow-up commit will use it far
more widely (hence the dead code for `ShouldSkipEmpty`).
Fix `MDScope::getFile()` so that it correctly returns a valid `MDFile`
even when it's an instance of `MDFile`. This logic is necessary because
of r230057. I'm working on moving the new hierarchy into place
out-of-tree (on track to commit Monday morning, BTW), and this was
exposed by a few failing tests.
Zachary Turner [Sat, 28 Feb 2015 20:23:18 +0000 (20:23 +0000)]
[llvm-pdbdump] Better error handling.
Previously it was impossible to distinguish between "There is
no PDB implementation for this platform" and "I tried to load
the PDB, but couldn't find the file", making it hard to figure
out if you built llvm-pdbdump incorrectly or if you just mistyped
a file name.
This patch adds proper error handling so that we can know exactly
what went wrong.
Zachary Turner [Sat, 28 Feb 2015 19:08:27 +0000 (19:08 +0000)]
[raw_ostream] When printing color on Windows, use correct bg color.
When using SetConsoleTextAttribute() to set the foreground or
background color, if you don't explicitly set both colors, then
a default value of black will be chosen for whichever you don't
specify a value for.
This is annoying when you have a non default console background
color, for example, and you try to set the foreground color.
This patch gets the existing fg/bg color and when you set one
attribute, sets the opposite attribute to its existing color
prior to comitting the update.
Peter Zotov [Sat, 28 Feb 2015 13:48:23 +0000 (13:48 +0000)]
[OCaml] Generate documentation again with autoconf buildsystem.
Patch by Evangelos Foutras:
r220899 started using ocamlfind to build the OCaml bindings but
docs/Makefile still contains references to the OCAMLDOC macro which
is no longer being defined. The result is that OCaml documentation
isn't generated/installed.
Benjamin Kramer [Sat, 28 Feb 2015 10:11:12 +0000 (10:11 +0000)]
Replace std::copy with a back inserter with vector append where feasible
All of the cases were just appending from random access iterators to a
vector. Using insert/append can grow the vector to the perfect size
directly and moves the growing out of the loop. No intended functionalty
change.
Philip Reames [Sat, 28 Feb 2015 01:52:09 +0000 (01:52 +0000)]
[RewriteStatepointsForGC] Fix another order of iteration bug
It turns out the naming of inserted phis and selects is sensative to the order in which two sets are iterated. We need to nail this down to avoid non-deterministic output and possible test failures.
The modified test is the one I first noticed something odd in. The change is making it more strict to report the error. With the test change, but without the code change, the test fails roughly 1 in 5. With the code change, I've run ~30 runs without error.
Long term, the right fix here is to adjust the naming scheme. I'm checking in this hack to avoid any possible non-determinism in the tests over the weekend. HJust because I only noticed one case doesn't mean it's actually the only case. I hope to get to the right change Monday.
Frederic Riss [Sat, 28 Feb 2015 00:29:11 +0000 (00:29 +0000)]
[dsymutil] Add the DwarfStreamer class.
This class is responsible for getting the linked data to the
disk in the appropriate form. Today it it an empty shell that
just instantiates an MC layer.
As we do not put anything in the resulting file yet, we just
check it has the right architecture (and check that -o does
the right thing).
To be able to create all the components, this commit adds a
few dependencies to llvm-dsymutil, namely all-targets, MC and
AsmPrinter.
Also add a -no-output option, so that tests that do not need
the binary result can continue to run even if they do not have
the required target linked in.
Frederic Riss [Sat, 28 Feb 2015 00:29:01 +0000 (00:29 +0000)]
[dsymutil] Create warn() global helper...
...and reimplement DwarfLinker::reportWarning in terms of it. Other
compenents than the DwarfLinker will need to report warnings, and I'm
about to add a similar "error()" helper at the same global level so
make that consistent.
Philip Reames [Sat, 28 Feb 2015 00:20:48 +0000 (00:20 +0000)]
[RewriteStatepointsForGC] Add tests for the base pointer identification algorithm
These tests cover the 'base object' identification and rewritting portion of RewriteStatepointsForGC. These aren't completely exhaustive, but they've proven to be reasonable effective over time at finding regressions.
In the process of porting these tests over, I found my first "cleanup per llvm code style standards" bug. We were relying on the order of iteration when testing the base pointers found for a derived pointer. When we switched from std::set to DenseSet, this stopped being a safe assumption. I'm suspecting I'm going to find more of those. In particular, I'm now really wondering about the main iteration loop for this algorithm. I need to go take a closer look at the assumptions there.
I'm not really happy with the fact these are testing what is essentially debug output (i.e. enabled via command line flags). Suggestions for how to structure this better are very welcome.
Philip Reames [Fri, 27 Feb 2015 23:14:50 +0000 (23:14 +0000)]
[new docs] Performance Tips for Frontend Authors
As mentioned on llvm-dev, this is a new documentation page intended to collect tips for frontend authors on how to generate IR that LLVM is able to optimize well. These types of things come up repeated in review threads and it would be good to have a place to save them.
I added a small handful to start us off, but I mostly want to get the framework in place. Once the docs are here, we can add to them incrementally. If you know of something appropriate for this page, please add it!
Bill Schmidt [Fri, 27 Feb 2015 22:14:10 +0000 (22:14 +0000)]
[PowerPC] Fix PR22711 - Misaligned .toc section
Straightforward patch to emit an alignment directive when emitting a
TOC entry. The test case was generated from the test in PR22711 that
demonstrated a misaligned .toc section. The object code is run
through llvm-readobj to verify that the correct alignment has been
applied to the .toc section.
Thanks to Ulrich Weigand for running down where the fix was needed.
David Blaikie [Fri, 27 Feb 2015 21:17:42 +0000 (21:17 +0000)]
[opaque pointer type] Add textual IR support for explicit type parameter to load instruction
Essentially the same as the GEP change in r230786.
A similar migration script can be used to update test cases, though a few more
test case improvements/changes were required this time around: (r229269-r229278)
import fileinput
import sys
import re
pat = re.compile(r"((?:=|:|^)\s*load (?:atomic )?(?:volatile )?(.*?))(| addrspace\(\d+\) *)\*($| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$)")
for line in sys.stdin:
sys.stdout.write(re.sub(pat, r"\1, \2\3*\4", line))
Charles Davis [Fri, 27 Feb 2015 21:11:16 +0000 (21:11 +0000)]
Target/X86: Never use the redzone for Win64 ABI functions.
Summary:
Until now, we did this (among other things) based on whether or not the
target was Windows. This is clearly wrong, not just for Win64 ABI functions
on non-Windows, but for System V ABI functions on Windows, too. In this
change, we make this decision based on the ABI the calling convention
specifies instead.
Hal Finkel [Fri, 27 Feb 2015 19:58:28 +0000 (19:58 +0000)]
[PowerPC] Use vector types for memcpy and friends (sometimes)
When using Altivec, we can use vector loads and stores for aligned memcpy and
friends. Starting with the P7 and VXS, we have reasonable unaligned vector
stores. Starting with the P8, we have fast unaligned loads too.
For QPX, we use vector loads are stores, but only for aligned memory accesses.
David Blaikie [Fri, 27 Feb 2015 19:29:02 +0000 (19:29 +0000)]
[opaque pointer type] Add textual IR support for explicit type parameter to getelementptr instruction
One of several parallel first steps to remove the target type of pointers,
replacing them with a single opaque pointer type.
This adds an explicit type parameter to the gep instruction so that when the
first parameter becomes an opaque pointer type, the type to gep through is
still available to the instructions.
* This doesn't modify gep operators, only instructions (operators will be
handled separately)
* Textual IR changes only. Bitcode (including upgrade) and changing the
in-memory representation will be in separate changes.
* geps of vectors are transformed as:
getelementptr <4 x float*> %x, ...
->getelementptr float, <4 x float*> %x, ...
Then, once the opaque pointer type is introduced, this will ultimately look
like:
getelementptr float, <4 x ptr> %x
with the unambiguous interpretation that it is a vector of pointers to float.
* address spaces remain on the pointer, not the type:
getelementptr float addrspace(1)* %x
->getelementptr float, float addrspace(1)* %x
Then, eventually:
getelementptr float, ptr addrspace(1) %x
Importantly, the massive amount of test case churn has been automated by
same crappy python code. I had to manually update a few test cases that
wouldn't fit the script's model (r228970,r229196,r229197,r229198). The
python script just massages stdin and writes the result to stdout, I
then wrapped that in a shell script to handle replacing files, then
using the usual find+xargs to migrate all the files.
update.py:
import fileinput
import sys
import re
ibrep = re.compile(r"(^.*?[^%\w]getelementptr inbounds )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
normrep = re.compile( r"(^.*?[^%\w]getelementptr )(((?:<\d* x )?)(.*?)(| addrspace\(\d\)) *\*(|>)(?:$| *(?:%|@|null|undef|blockaddress|getelementptr|addrspacecast|bitcast|inttoptr|\[\[[a-zA-Z]|\{\{).*$))")
def conv(match, line):
if not match:
return line
line = match.groups()[0]
if len(match.groups()[5]) == 0:
line += match.groups()[2]
line += match.groups()[3]
line += ", "
line += match.groups()[1]
line += "\n"
return line
for line in sys.stdin:
if line.find("getelementptr ") == line.find("getelementptr inbounds"):
if line.find("getelementptr inbounds") != line.find("getelementptr inbounds ("):
line = conv(re.match(ibrep, line), line)
elif line.find("getelementptr ") != line.find("getelementptr ("):
line = conv(re.match(normrep, line), line)
sys.stdout.write(line)
apply.sh:
for name in "$@"
do
python3 `dirname "$0"`/update.py < "$name" > "$name.tmp" && mv "$name.tmp" "$name"
rm -f "$name.tmp"
done
The actual commands:
From llvm/src:
find test/ -name *.ll | xargs ./apply.sh
From llvm/src/tools/clang:
find test/ -name *.mm -o -name *.m -o -name *.cpp -o -name *.c | xargs -I '{}' ../../apply.sh "{}"
From llvm/src/tools/polly:
find test/ -name *.ll | xargs ./apply.sh
After that, check-all (with llvm, clang, clang-tools-extra, lld,
compiler-rt, and polly all checked out).
The extra 'rm' in the apply.sh script is due to a few files in clang's test
suite using interesting unicode stuff that my python script was throwing
exceptions on. None of those files needed to be migrated, so it seemed
sufficient to ignore those cases.
Eric Christopher [Fri, 27 Feb 2015 19:03:38 +0000 (19:03 +0000)]
Remove the Forward Control Flow Integrity pass and its dependencies.
This work is currently being rethought along different lines and
if this work is needed it can be resurrected out of svn. Remove it
for now as no current work in ongoing on it and it's unused. Verified
with the authors before removal.
Mehdi Amini [Fri, 27 Feb 2015 18:32:11 +0000 (18:32 +0000)]
Change the fast-isel-abort option from bool to int to enable "levels"
Summary:
Currently fast-isel-abort will only abort for regular instructions,
and just warn for function calls, terminators, function arguments.
There is already fast-isel-abort-args but nothing for calls and
terminators.
This change turns the fast-isel-abort options into an integer option,
so that multiple levels of strictness can be defined.
This will help no being surprised when the "abort" option indeed does
not abort, and enables the possibility to write test that verifies
that no intrinsics are forgotten by fast-isel.
projects / llvm / log