Steve Holme [Thu, 31 May 2012 21:49:14 +0000 (22:49 +0100)]
smtp.c: Re-factored smtp_auth_login_user() for use with passwords
In preparation for moving to the SASL module re-factored the
smtp_auth_login_user() function to smtp_auth_login() so that it can be
used for both user names and passwords as sending both of these under
the login authentication mechanism is the same.
Yang Tse [Wed, 30 May 2012 15:39:14 +0000 (17:39 +0200)]
pop3 test server: allow pop3 test server verification to succeed again
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further
pop3 test server expansion for tests that require CAPA or AUTH support,
although this will need some extra work to make it fully functional.
Steve Holme [Mon, 28 May 2012 19:59:10 +0000 (20:59 +0100)]
pop3: Changed response code from O and E to + and -
The POP3 protocol doesn't really have the concept of error codes and
uses +, +OK and -ERR in response to commands to indicate continue,
success and error.
The AUTH command is one of those commands that requires multiple pieces
of data to be sent to the server where the server will respond with + as
part of the handshaking. This meant changing the values before
continuing with the next stage of adding authentication support.
Steve Holme [Sun, 27 May 2012 18:09:38 +0000 (19:09 +0100)]
pop3: Added support for SASL based authentication mechanism detection
Added support for detecting the supported SASL authentication mechanisms
via the AUTH command. There are two ways of detecting them, either by
using the AUTH command, that will return -ERR if not supported or by
using the CAPA command which will return SASL and the list of mechanisms
if supported, not include SASL if SASL authentication is not supported
or -ERR if the CAPA command is not supported. As such it seems simpler
to use the AUTH command and fallback to normal clear text authentication
if the the command is not supported.
Additionally updated the test cases to return -ERR when the AUTH command
is encountered. Additional test cases will be added when support for the
individual authentication mechanisms is added.
Check checksum of downloaded file if checksum is available
Metalink file contains several hash types of checksums, such as
md5, sha-1, sha-256, etc. To deal with these checksums, I created
abstraction layer based on lib/curl_md5.h and
lib/md5.c. Basically, they are almost the same but I changed the
code so that it is not hash type dependent. Currently,
GNUTLS(nettle or gcrypt) and OpenSSL functions are supported.
Checksum checking is done by reopening download file. If there
is an I/O error, the current implementation just prints error
message and does not try next resource.
In this patch, the supported hash types are: md5, sha-1 and sha-256.
Filenames contained in Metalink file can include directory information.
Filenames are unique in Metalink file, taking into account the directory
information. So we need to create the directory hierarchy.
Curl has --create-dirs option, but we create directory hierarchy for
Metalink downloads regardless of the option value.
This patch also put metalink int variable outside of HAVE_LIBMETALINK
guard. This reduces the number of #ifdefs.
This change adds experimental Metalink support to curl.
To enable Metalink support, run configure with --with-libmetalink.
To feed Metalink file to curl, use --metalink option like this:
Steve Holme [Sat, 26 May 2012 11:26:35 +0000 (12:26 +0100)]
DOCS: Standardised how RFCs are referenced.
Standardised how RFCs are referenced so that the website may autolink to
the correct documentation on ietf.org. Additionally removed the one link
to RFC3986 on curl.haxx.se.
To achieve this, first new structure HeaderData is defined to hold
necessary data to perform header-related work. Then tool_header_cb now
receives HeaderData pointer as userdata. All header-related work
(currently, dumping header and Content-Disposition inspection) are done
in this callback function. HeaderData.outs->config is used to determine
whether each work is done.
Unit tests were also updated because after this change, curl code always
sets CURLOPT_HEADERFUNCTION and CURLOPT_HEADERDATA.
Tested with -O -J -D, -O -J -i and -O -J -D -i and all worked fine.
Steve Holme [Fri, 25 May 2012 20:49:25 +0000 (21:49 +0100)]
smtp: Moved auth-mechanism constants into a separate header file
Move the SMTP_AUTH constants into a separate header file in
preparation for adding SASL based authentication to POP3 as the two
protocols will need to share them.
Steve Holme [Tue, 22 May 2012 21:08:25 +0000 (22:08 +0100)]
smtp: Fixed an issue with the multi-interface always sending postdata
Due to the result code being reset to CURLE_OK when smtp_dophase_done()
was called, postdata would incorrectly be sent to the server when the
MAIL FROM or RCPT command was rejected.
As such, libcurl would return the wrong result code from performing the
operation and additionally set CURLINFO_RESPONSE_CODE to be that
returned by the postdata command.
In nettle/md5.h, md5_init and md5_update are defined as macros to
nettle_md5_init and nettle_md5_update respectively. This causes
error when using MD5_params.md5_init and md5_update. This patch
renames these members as md5_init_func and md5_update_func to
avoid name conflict. For completeness, MD5_params.md5_final was
also renamed as md5_final_func.
The changes in curl_ntlm_core.c is conversion error and fixed by
casting to proper type.
Steve Holme [Thu, 17 May 2012 10:31:06 +0000 (11:31 +0100)]
smtp: Fixed non-escaping of dot character at beginning of line
A dot character at the beginning of a line would not be escaped to a
double dot as required by RFC-2821, instead it would be deleted by the
mail server. Please see section 4.5.2 of the RFC for more information.
Note: This fix also simplifies the detection of repeated CRLF.CRLF
combinations, such as CRLF.CRLF.CRLF, a little rather than having to
advance the eob counter to 2.
Pierre Chapuis [Thu, 10 May 2012 16:50:51 +0000 (18:50 +0200)]
autoconf: improve handling of versioned symbols
It checks whether versioned symbols should be enabled before checking
whether it is possible (i.e. the linker supports --version-script) or
not. This avoids a useless warning when building cURL on a platform that
does not use GNU ld.
Moreover, it fixes broken indentation of this chunk of code.
Roman Mamedov spotted (in
http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=670126) that curl would
not complain when given a URL with an IPv6 numerical address without
brackets. It would simply cut off the last ":[hex]" part and thus not
work correctly.
That's a URL using an illegal syntax and now libcurl will instead return
a clear error code and error message detailing the error.
The above mentioned bug report claims this to be a regression but
libcurl does not guarantee functionality when given URLs that aren't
following the URL spec (RFC3986 mostly). I consider the fact that it
used to handle this differently a mere coincidence.
Daniel Stenberg [Fri, 20 Apr 2012 18:40:55 +0000 (20:40 +0200)]
HTTP: empty chunked POST ended up in two zero size chunks
When doing a chunked-encoded POST with -d (CURLOPT_POSTFIELDS) and the
size of the POST was zero length, it made libcurl first send a zero
chunk and then the terminating one. This could confuse a receiver and it
should rather just send the terminating chunk as it does with this fix.
Daniel Stenberg [Thu, 19 Apr 2012 21:31:50 +0000 (23:31 +0200)]
singleipconnect: return OK even when Curl_socket() fails
Commit 9109cdec11ee5a brought this regression (shipped since 7.24.0).
The singleipconnect() function must not return an error if Curl_socket()
returns an error. It should then simply return OK and pass a SOCKET_BAD
back simply because that is how the user of this function expects it to
work and something else is not fine.
projects / curl / log