Make GIN's cleanup pending list process interruptable
Cleanup process could be called by ordinary insert/update and could take a lot
of time. Add vacuum_delay_point() to make this process interruptable. Under
vacuum this call will also throttle a vacuum process to decrease system load,
called from insert/update it will not throttle, and that reduces a latency.
Add pages deleted from GIN's pending list during cleanup to free space map
immediately. Clean up process could be initiated by ordinary insert but adding
page to FSM might occur only at vacuum. On some workload like never-vacuumed
insert-only tables it could cause a huge bloat.
Joe Conway [Sun, 6 Sep 2015 18:25:36 +0000 (11:25 -0700)]
Adjust sepgsql regression output for recent error context change
Recent commit 0426f349e changed handling of error context reports
in such a way to have a minor effect on the sepgsql regression
output. Adapt the expected output file to suit. Since that commit
was HEAD only, so is this one.
Andres Freund [Sun, 6 Sep 2015 11:17:23 +0000 (13:17 +0200)]
Add ability to reserve WAL upon slot creation via replication protocol.
Since 6fcd885 it is possible to immediately reserve WAL when creating a
slot via pg_create_physical_replication_slot(). Extend the replication
protocol to allow that as well.
Although, in contrast to the SQL interface, it is possible to update the
reserved location via the replication interface, it is still useful
being able to reserve upon creation there. Otherwise the logic in
ReplicationSlotReserveWal() has to be repeated in slot employing
clients.
Author: Michael Paquier
Discussion: CAB7nPqT0Wc1W5mdYGeJ_wbutbwNN+3qgrFR64avXaQCiJMGaYA@mail.gmail.com
Greg Stark [Sun, 6 Sep 2015 01:04:37 +0000 (02:04 +0100)]
Move DTK_ISODOW DTK_DOW and DTK_DOY to be type UNITS rather than
RESERV. RESERV is meant for tokens like "now" and having them in that
category throws errors like these when used as an input date:
stark=# SELECT 'doy'::timestamptz;
ERROR: unexpected dtype 33 while parsing timestamptz "doy"
LINE 1: SELECT 'doy'::timestamptz;
^
stark=# SELECT 'dow'::timestamptz;
ERROR: unexpected dtype 32 while parsing timestamptz "dow"
LINE 1: SELECT 'dow'::timestamptz;
^
Tom Lane [Sat, 5 Sep 2015 20:15:38 +0000 (16:15 -0400)]
Fix CreateTableSpace() so it will compile without HAVE_SYMLINK.
This has been broken since 9.3 (commit 82b1b213cad3a69c to be exact),
which suggests that nobody is any longer using a Windows build system that
doesn't provide a symlink emulation. Still, it's wrong on its own terms,
so repair.
Tom Lane [Sat, 5 Sep 2015 15:58:20 +0000 (11:58 -0400)]
Rearrange the handling of error context reports.
Remove the code in plpgsql that suppressed the innermost line of CONTEXT
for messages emitted by RAISE commands. That was never more than a quick
backwards-compatibility hack, and it's pretty silly in cases where the
RAISE is nested in several levels of function. What's more, it violated
our design theory that verbosity of error reports should be controlled
on the client side not the server side.
To alleviate the resulting noise increase, introduce a feature in libpq
and psql whereby the CONTEXT field of messages can be suppressed, either
always or only for non-error messages. Printing CONTEXT for errors only
is now their default behavior.
The actual code changes here are pretty small, but the effects on the
regression test outputs are widespread. I had to edit some of the
alternative expected outputs by hand; hopefully the buildfarm will soon
find anything I fat-fingered.
In passing, fix up (again) the output line counts in psql's various
help displays. Add some commentary about how to verify them.
Pavel Stehule, reviewed by Petr Jelínek, Jeevan Chalke, and others
If the number of heap blocks is not multiples of pages per range, the
summarizing produces wrong summary information for the last brin index
tuple while vacuuming.
Problem reported by Tatsuo Ishii and fixed by Amit Langote.
Discussion at "[HACKERS] BRIN INDEX value (message id :20150903.174935.1946402199422994347.t-ishii@sraoss.co.jp)
Backpatched to 9.5 in which brin index was added.
Tom Lane [Fri, 4 Sep 2015 17:36:49 +0000 (13:36 -0400)]
Fix subtransaction cleanup after an outer-subtransaction portal fails.
Formerly, we treated only portals created in the current subtransaction as
having failed during subtransaction abort. However, if the error occurred
while running a portal created in an outer subtransaction (ie, a cursor
declared before the last savepoint), that has to be considered broken too.
To allow reliable detection of which ones those are, add a bookkeeping
field to struct Portal that tracks the innermost subtransaction in which
each portal has actually been executed. (Without this, we'd end up
failing portals containing functions that had called the subtransaction,
thereby breaking plpgsql exception blocks completely.)
In addition, when we fail an outer-subtransaction Portal, transfer its
resources into the subtransaction's resource owner, so that they're
released early in cleanup of the subxact. This fixes a problem reported by
Jim Nasby in which a function executed in an outer-subtransaction cursor
could cause an Assert failure or crash by referencing a relation created
within the inner subtransaction.
The proximate cause of the Assert failure is that AtEOSubXact_RelationCache
assumed it could blow away a relcache entry without first checking that the
entry had zero refcount. That was a bad idea on its own terms, so add such
a check there, and to the similar coding in AtEOXact_RelationCache. This
provides an independent safety measure in case there are still ways to
provoke the situation despite the Portal-level changes.
This has been broken since subtransactions were invented, so back-patch
to all supported branches.
Robert Haas [Thu, 3 Sep 2015 17:10:53 +0000 (13:10 -0400)]
Assorted code review for recent ProcArrayLock patch.
Post-commit review by Andres Freund discovered a couple of concurrency
bugs in the original patch: specifically, if the leader cleared a
follower's XID before it reached PGSemaphoreLock, the semaphore would be
left in the wrong state; and if another process did PGSemaphoreUnlock
for some unrelated reason, we might resume execution before the fact
that our XID was cleared was globally visible.
Also, improve the wording of some comments, rename nextClearXidElem
to firstClearXidElem in PROC_HDR for clarity, and drop some volatile
qualifiers that aren't necessary.
Document that max_worker_processes must be high enough in standby.
The setting values of some parameters including max_worker_processes
must be equal to or higher than the values on the master. However,
previously max_worker_processes was not listed as such parameter
in the document. So this commit adds it to that list.
Back-patch to 9.4 where max_worker_processes was added.
Most suites already did so via start_test_server(), but the pg_rewind,
pg_ctl and pg_controldata suites ran a postmaster or initdb with fsync
enabled. This halves the pg_rewind suite's runtime on buildfarm member
tern. It makes tern and that machine's other buildfarm members less
vulnerable to noise failures from postmaster startup overrunning the 60s
pg_ctl timeout. Back-patch to 9.5, where pg_rewind was introduced.
Allow usage of huge maintenance_work_mem for GIN build.
Currently, in-memory posting list during GIN build process is limited 1GB
because of using repalloc. The patch replaces call of repalloc to repalloc_huge.
It increases limit of posting list from 180 millions
(1GB / sizeof(ItemPointerData)) to 4 billions limited by maxcount/count fields
in GinEntryAccumulator and subsequent calls. Check added.
Also, fix accounting of allocatedMemory during build to prevent integer
overflow with maintenance_work_mem > 4GB.
Robert Abraham <robert.abraham86@googlemail.com> with additions by me
Robert Haas [Tue, 1 Sep 2015 19:30:19 +0000 (15:30 -0400)]
Allow notifications to bgworkers without database connections.
Previously, if one background worker registered another background
worker and set bgw_notify_pid while for the second background worker,
it would not receive notifications from the postmaster unless, at the
time the "parent" was registered, BGWORKER_BACKEND_DATABASE_CONNECTION
was set.
To fix, instead instead of including only those background workers that
requested database connections in the postmater's BackendList, include
them all. There doesn't seem to be any reason not do this, and indeed
it removes a significant amount of duplicated code. The other option
is to make PostmasterMarkPIDForWorkerNotify look at BackgroundWorkerList
in addition to BackendList, but that adds more code duplication instead
of getting rid of it.
Patch by me. Review and testing by Ashutosh Bapat.
Tom Lane [Mon, 31 Aug 2015 22:10:04 +0000 (18:10 -0400)]
Clean up icc + ia64 situation.
Some googling turned up multiple sources saying that older versions of icc
do not accept gcc-compatible asm blocks on IA64, though asm does work on
x86[_64]. This is apparently fixed as of icc version 12.0 or so, but that
doesn't help us much; if we have to carry the extra implementation anyway,
we may as well just use it for icc rather than add a compiler version test.
Hence, revert commit 2c713d6ea29c91cd2cbd92fa801a61e55ea2a3c4 (though I
separated the icc code from the gcc code completely, producing what seems
cleaner code). Document the state of affairs more explicitly, both in
s_lock.h and postgres.c, and make some cosmetic adjustments around the
IA64 code in s_lock.h.
Tom Lane [Mon, 31 Aug 2015 20:30:12 +0000 (16:30 -0400)]
Allow icc to use the same atomics infrastructure as gcc.
The atomics headers were written under the impression that icc doesn't
handle gcc-style asm blocks, but this is demonstrably false on x86_[64],
because s_lock.h has done it that way for more than a decade. (The jury is
still out on whether this also works on ia64, so I'm leaving ia64-related
code alone for the moment.) Treat gcc and icc the same in these headers.
This is less code and it should improve the results for icc, because we
hadn't gotten around to providing icc-specific implementations for most
of the atomics.
Tom Lane [Mon, 31 Aug 2015 18:43:10 +0000 (14:43 -0400)]
Remove theoretically-unnecessary special case for icc.
Intel's icc is generally able to swallow asm blocks written for gcc.
We have a few places that don't seem to know that, though. Experiment
with removing the special case for icc in ia64_get_bsp(); if the buildfarm
likes this, I'll try more cleanup. This is a good test case because it
involves a "stop" notation that seems like it might not be very portable.
Tom Lane [Mon, 31 Aug 2015 16:55:59 +0000 (12:55 -0400)]
Remove support for Unix systems without the POSIX signal APIs.
Remove configure's checks for HAVE_POSIX_SIGNALS, HAVE_SIGPROCMASK, and
HAVE_SIGSETJMP. These APIs are required by the Single Unix Spec v2
(POSIX 1997), which we generally consider to define our minimum required
set of Unix APIs. Moreover, no buildfarm member has reported not having
them since 2012 or before, which means that even if the code is still live
somewhere, it's untested --- and we've made plenty of signal-handling
changes of late. So just take these APIs as given and save the cycles for
configure probes for them.
However, we can't remove as much C code as I'd hoped, because the Windows
port evidently still uses the non-POSIX code paths for signal masking.
Since we're largely emulating these BSD-style APIs for Windows anyway, it
might be a good thing to switch over to POSIX-like notation and thereby
remove a few more #ifdefs. But I'm not in a position to code or test that.
In the meantime, we can at least make things a bit more transparent by
testing for WIN32 explicitly in these places.
Tom Lane [Mon, 31 Aug 2015 05:36:46 +0000 (01:36 -0400)]
Remove long-dead support for platforms without sig_atomic_t.
C89 requires <signal.h> to define sig_atomic_t, and there is no evidence
in the buildfarm that any supported platforms don't comply. Remove the
configure test to stop wasting build cycles on a purely historical issue.
(Once upon a time, we cared about supporting C89-compliant compilers on
machines with pre-C89 system headers, but that use-case has been dead for
quite a few years.)
I have some other fixes planned in this area, but let's start with this
to see if the buildfarm produces any surprising results.
Joe Conway [Sun, 30 Aug 2015 18:09:05 +0000 (11:09 -0700)]
Fix sepgsql regression tests.
The regression tests for sepgsql were broken by changes in the
base distro as-shipped policies. Specifically, definition of
unconfined_t in the system default policy was changed to bypass
multi-category rules, which the regression test depended on.
Fix that by defining a custom privileged domain
(sepgsql_regtest_superuser_t) and using it instead of system's
unconfined_t domain. The new sepgsql_regtest_superuser_t domain
performs almost like the current unconfined_t, but restricted by
multi-category policy as the traditional unconfined_t was.
The custom policy module is a self defined domain, and so should not
be affected by related future system policy changes. However, it still
uses the unconfined_u:unconfined_r pair for selinux-user and role.
Those definitions have not been changed for several years and seem
less risky to rely on than the unconfined_t domain. Additionally, if
we define custom user/role, they would need to be manually defined
at the operating system level, adding more complexity to an already
non-standard and complex regression test.
Back-patch to 9.3. The regression tests will need more work before
working correctly on 9.2. Starting with 9.2, sepgsql has had dependencies
on libselinux versions that are only available on newer distros with
the changed set of policies (e.g. RHEL 7.x). On 9.1 sepgsql works
fine with the older distros with original policy set (e.g. RHEL 6.x),
and on which the existing regression tests work fine. We might want
eventually change 9.1 sepgsql regression tests to be more independent
from the underlying OS policies, however more work will be needed to
make that happen and it is not clear that it is worth the effort.
Kohei KaiGai with review by Adam Brightwell and me, commentary by
Stephen, Alvaro, Tom, Robert, and others.
Tom Lane [Sat, 29 Aug 2015 20:09:25 +0000 (16:09 -0400)]
Fix s_lock.h PPC assembly code to be compatible with native AIX assembler.
On recent AIX it's necessary to configure gcc to use the native assembler
(because the GNU assembler hasn't been updated to handle AIX 6+). This
caused PG builds to fail with assembler syntax errors, because we'd try
to compile s_lock.h's gcc asm fragment for PPC, and that assembly code
relied on GNU-style local labels. We can't substitute normal labels
because it would fail in any file containing more than one inlined use of
tas(). Fortunately, that code is stable enough, and the PPC ISA is simple
enough, that it doesn't seem like too much of a maintenance burden to just
hand-code the branch offsets, removing the need for any labels.
Note that the AIX assembler only accepts "$" for the location counter
pseudo-symbol. The usual GNU convention is "."; but it appears that all
versions of gas for PPC also accept "$", so in theory this patch will not
break any other PPC platforms.
This has been reported by a few people, but Steve Underwood gets the credit
for being the first to pursue the problem far enough to understand why it
was failing. Thanks also to Noah Misch for additional testing.
Stephen Frost [Fri, 28 Aug 2015 15:39:37 +0000 (11:39 -0400)]
Ensure locks are acquired on RLS-added relations
During fireRIRrules(), get_row_security_policies can add to
securityQuals and withCheckOptions. Make sure to lock any relations
added at that point and before firing RIR rules on those expressions.
Tom Lane [Wed, 26 Aug 2015 22:18:57 +0000 (18:18 -0400)]
Speed up HeapTupleSatisfiesMVCC() by replacing the XID-in-progress test.
Rather than consulting TransactionIdIsInProgress to see if an in-doubt
transaction is still running, consult XidInMVCCSnapshot. That requires
the same or fewer cycles as TransactionIdIsInProgress, and what's far
more important, it does not access shared data structures (at least in the
no-subxip-overflow case) so it incurs no contention. Furthermore, we would
have had to check XidInMVCCSnapshot anyway before deciding that we were
allowed to see the tuple.
There should never be a case where XidInMVCCSnapshot says a transaction is
done while TransactionIdIsInProgress says it's still running. The other
way around is quite possible though. The result of that difference is that
HeapTupleSatisfiesMVCC will no longer set hint bits on tuples whose source
transactions recently finished but are still running according to our
snapshot. The main cost of delaying the hint-bit setting is that repeated
visits to a just-committed tuple, by transactions none of which have
snapshots new enough to see the source transaction as done, will each
execute TransactionIdIsCurrentTransactionId, which they need not have done
before. However, that's normally just a small overhead, and no contention
costs are involved; so it seems well worth the benefit of removing
TransactionIdIsInProgress calls during the life of the source transaction.
The core idea for this patch is due to Jeff Janes, who also did the legwork
proving its performance benefits. His original proposal was to swap the
order of TransactionIdIsInProgress and XidInMVCCSnapshot calls in some
cases within HeapTupleSatisfiesMVCC. That was a bit messy though.
The idea that we could dispense with calling TransactionIdIsInProgress
altogether was mine, as is the final patch.
Joe Conway [Wed, 26 Aug 2015 01:45:44 +0000 (18:45 -0700)]
Reestablish alignment of pg_controldata output.
Until 9.4, pg_controldata output was all aligned. At some point
during 9.5 development, a new item was added, namely
"Current track_commit_timestamp setting:" which is two characters
too long to be aligned with the rest of the output. Fix this by
removing the noise word "Current" and adding the requisite number
of padding spaces. Since the six preceding items are also similar
in nature, remove "Current" and pad those as well in order to
maintain overall consistency. Backpatch to 9.5 where new offending
item was added.
Tom Lane [Tue, 25 Aug 2015 23:11:17 +0000 (19:11 -0400)]
Docs: be explicit about datatype matching for lead/lag functions.
The default argument, if given, has to be of exactly the same datatype
as the first argument; but this was not stated in so many words, and
the error message you get about it might not lead your thought in the
right direction. Per bug #13587 from Robert McGehee.
A quick scan says that these are the only two built-in functions with two
anyelement arguments and no other polymorphic arguments. There are plenty
of cases of, eg, anyarray and anyelement, but those seem less likely to
confuse. For instance this doesn't seem terribly hard to figure out:
"function array_remove(integer[], numeric) does not exist". So I've
contented myself with fixing these two cases.
Tom Lane [Tue, 25 Aug 2015 17:09:48 +0000 (13:09 -0400)]
Limit the verbosity of memory context statistics dumps.
We had a report from Stefan Kaltenbrunner of a case in which postmaster
log files overran available disk space because multiple backends spewed
enormous context stats dumps upon hitting an out-of-memory condition.
Given the lack of similar reports, this isn't a common problem, but it
still seems worth doing something about. However, we don't want to just
blindly truncate the output, because that might prevent diagnosis of OOM
problems. What seems like a workable compromise is to limit the dump to
100 child contexts per parent, and summarize the space used within any
additional child contexts. That should help because practical cases where
the dump gets long will typically be huge numbers of siblings under the
same parent context; while the additional debugging value from seeing
details about individual siblings beyond 100 will not be large, we hope.
Anyway it doesn't take much code or memory space to do this, so let's try
it like this and see how things go.
Since the summarization mechanism requires passing totals back up anyway,
I took the opportunity to add a "grand total" line to the end of the
printout.
Tom Lane [Tue, 25 Aug 2015 15:43:37 +0000 (11:43 -0400)]
Fix potential platform dependence in gist regression test.
The results of the KNN-search test cases were indeterminate, as they asked
the system to sort pairs of points that are exactly equidistant from the
query reference point. It's a bit surprising that we've seen no
platform-specific failures from this in the buildfarm. Perhaps IEEE-float
math is well enough standardized that no such failures will ever occur on
supported platforms ... but since this entire regression test has yet to be
shipped in any non-alpha release, that seems like an unduly optimistic
assumption. Tweak the queries so that the correct output is uniquely
defined.
(The other queries in this test are also underdetermined; but it looks like
they are regurgitating index rows in insertion order, so for the moment
assume that that behavior is stable enough.)
Per Greg Stark's experiments with VAX. Back-patch to 9.5 where this test
script was introduced.
Tom Lane [Sun, 23 Aug 2015 19:15:47 +0000 (15:15 -0400)]
Reduce number of bytes examined by convert_one_string_to_scalar().
Previously, convert_one_string_to_scalar() would examine up to 20 bytes of
the input string, producing a scalar conversion with theoretical precision
far greater than is of any possible use considering the other limitations
on the accuracy of the resulting selectivity estimate. (I think this
choice might pre-date the caller-level logic that strips any common prefix
of the strings; before that, there could have been value in scanning the
strings far enough to use all the precision available in a double.)
Aside from wasting cycles to little purpose, this choice meant that the
"denom" variable could grow to as much as 256^21 = 3.74e50, which could
overflow in some non-IEEE float arithmetics. While we don't really support
any machines with non-IEEE arithmetic anymore, this still seems like quite
an unnecessary platform dependency. Limit the scan to 12 bytes instead,
thus limiting "denom" to 256^13 = 2.03e31, a value more likely to be
computable everywhere.
Per testing by Greg Stark, which showed overflow failures in our standard
regression tests on VAX.
Tom Lane [Sun, 23 Aug 2015 17:02:13 +0000 (13:02 -0400)]
Avoid use of float arithmetic in bipartite_match.c.
Since the distances used in this algorithm are small integers (not more
than the size of the U set, in fact), there is no good reason to use float
arithmetic for them. Use short ints instead: they're smaller, faster, and
require no special portability assumptions.
Per testing by Greg Stark, which disclosed that the code got into an
infinite loop on VAX for lack of IEEE-style float infinities. We don't
really care all that much whether Postgres can run on a VAX anymore,
but there seems sufficient reason to change this code anyway.
In passing, make a few other small adjustments to make the code match
usual Postgres coding style a bit better.
Tom Lane [Sat, 22 Aug 2015 00:32:11 +0000 (20:32 -0400)]
Avoid O(N^2) behavior when enlarging SPI tuple table in spi_printtup().
For no obvious reason, spi_printtup() was coded to enlarge the tuple
pointer table by just 256 slots at a time, rather than doubling the size at
each reallocation, as is our usual habit. For very large SPI results, this
makes for O(N^2) time spent in repalloc(), which of course soon comes to
dominate the runtime. Use the standard doubling approach instead.
This is a longstanding performance bug, so back-patch to all active
branches.
Tom Lane [Sat, 22 Aug 2015 00:17:19 +0000 (20:17 -0400)]
Detect mismatched CONTINUE and EXIT statements at plpgsql compile time.
With a bit of tweaking of the compile namestack data structure, we can
verify at compile time whether a CONTINUE or EXIT is legal. This is
surely better than leaving it to runtime, both because earlier is better
and because we can issue a proper error pointer. Also, we can get rid
of the ad-hoc old way of detecting the problem, which only took care of
CONTINUE not EXIT.
Stephen Frost [Fri, 21 Aug 2015 19:51:24 +0000 (15:51 -0400)]
Clean up roles from roleattributes test
Having the roles remain after the test ends up causing repeated 'make
installcheck' runs to fail and may be risky from a security perspective
also, so remove them at the end of the test.
Alvaro Herrera [Fri, 21 Aug 2015 17:36:54 +0000 (14:36 -0300)]
Do not allow *timestamp to be passed as NULL
The code had bugs that would cause crashes if NULL was passed as that
argument (originally intended to mean not to bother returning its
value), and after inspection it turns out that nothing seems interested
in the case that *ts is NULL anyway. Therefore, remove the partial
checks intended to support that case.
Author: Michael Paquier
though I didn't include a proposed Assert.
Tom Lane [Fri, 21 Aug 2015 16:21:37 +0000 (12:21 -0400)]
Fix plpython crash when returning string representation of a RECORD result.
PLyString_ToComposite() blithely overwrote proc->result.out.d, even though
for a composite result type the other union variant proc->result.out.r is
the one that should be valid. This could result in a crash if out.r had
in fact been filled in (proc->result.is_rowtype == 1) and then somebody
later attempted to use that data; as per bug #13579 from Paweł Michalak.
Just to add insult to injury, it didn't work for RECORD results anyway,
because record_in() would refuse the case.
Fix by doing the I/O function lookup in a local PLyTypeInfo variable,
as we were doing already in PLyObject_ToComposite(). This is not a great
technique because any fn_extra data allocated by the input function will
be leaked permanently (thanks to using TopMemoryContext as fn_mcxt).
But that's a pre-existing issue that is much less serious than a crash,
so leave it to be fixed separately.
This bug would be a potential security issue, except that plpython is
only available to superusers and the crash requires coding the function
in a way that didn't work before today's patches.
Add regression test cases covering all the supported methods of converting
composite results.
Back-patch to 9.1 where the faulty coding was introduced.
Tom Lane [Fri, 21 Aug 2015 15:19:33 +0000 (11:19 -0400)]
Allow record_in() and record_recv() to work for transient record types.
If we have the typmod that identifies a registered record type, there's no
reason that record_in() should refuse to perform input conversion for it.
Now, in direct SQL usage, record_in() will always be passed typmod = -1
with type OID RECORDOID, because no typmodin exists for type RECORD, so the
case can't arise. However, some InputFunctionCall users such as PLs may be
able to supply the right typmod, so we should allow this to support them.
Note: the previous coding and comment here predate commit 59c016aa9f490b53.
There has been no case since 8.1 in which the passed type OID wouldn't be
valid; and if it weren't, this error message wouldn't be apropos anyway.
Better to let lookup_rowtype_tupdesc complain about it.
Back-patch to 9.1, as this is necessary for my upcoming plpython fix.
I'm committing it separately just to make it a bit more visible in the
commit history.
Stephen Frost [Fri, 21 Aug 2015 12:22:22 +0000 (08:22 -0400)]
Rename 'cmd' to 'cmd_name' in CreatePolicyStmt
To avoid confusion, rename CreatePolicyStmt's 'cmd' to 'cmd_name',
parse_policy_command's 'cmd' to 'polcmd', and AlterPolicy's 'cmd_datum'
to 'polcmd_datum', per discussion with Noah and as a follow-up to his
correction of copynodes/equalnodes handling of the CreatePolicyStmt
'cmd' field.
Back-patch to 9.5 where the CreatePolicyStmt was introduced, as we
are still only in alpha.
Stephen Frost [Fri, 21 Aug 2015 12:22:22 +0000 (08:22 -0400)]
In AlterRole, make bypassrls an int
When reworking bypassrls in AlterRole to operate the same way the other
attribute handling is done, I missed that the variable was incorrectly a
bool rather than an int. This meant that on platforms with an unsigned
char, we could end up with incorrect behavior during ALTER ROLE.
Pointed out by Andres thanks to tests he did changing our bool to be the
one from stdbool.h which showed this and a number of other issues.
Add regression tests to test CREATE/ALTER role for the various role
attributes. Arrange to leave roles behind for testing pg_dumpall, but
none which have the LOGIN attribute.
Tom Lane [Thu, 20 Aug 2015 16:28:15 +0000 (12:28 -0400)]
Remove xpath namespace-handling change from 9.5 release notes.
Although commit 79af9a1d2 was initially applied to HEAD only, we later
back-patched the change into all branches (commits 6bbf75192 et al).
So it's not a new behavior in 9.5 and should not be release-noted here.
Kevin Grittner [Wed, 19 Aug 2015 13:20:55 +0000 (08:20 -0500)]
Fix bug in calculations of hash join buckets.
Commit 8cce08f168481c5fc5be4e7e29b968e314f1b41e used a left-shift
on a literal of 1 that could (in large allocations) be shifted by
31 or more bits. This was assigned to a local variable that was
already declared to be a long to protect against overruns of int,
but the literal in this shift needs to be declared long to allow it
to work correctly in some compilers.
Backpatch to 9.5, where the bug was introduced.
Report and patch by KaiGai Kohei, slighly modified based on
discussion.
Tom Lane [Tue, 18 Aug 2015 23:22:37 +0000 (19:22 -0400)]
Fix a few bogus statement type names in plpgsql error messages.
plpgsql's error location context messages ("PL/pgSQL function fn-name line
line-no at stmt-type") would misreport a CONTINUE statement as being an
EXIT, and misreport a MOVE statement as being a FETCH. These are clear
bugs that have been there a long time, so back-patch to all supported
branches.
In addition, in 9.5 and HEAD, change the description of EXECUTE from
"EXECUTE statement" to just plain EXECUTE; there seems no good reason why
this statement type should be described differently from others that have
a well-defined head keyword. And distinguish GET STACKED DIAGNOSTICS from
plain GET DIAGNOSTICS. These are a bit more of a judgment call, and also
affect existing regression-test outputs, so I did not back-patch into
stable branches.
Tom Lane [Mon, 17 Aug 2015 23:39:35 +0000 (19:39 -0400)]
Fix performance bug from conflict between two previous improvements.
My expanded-objects patch (commit 1dc5ebc9077ab742) included code to make
plpgsql pass expanded-object variables as R/W pointers to certain functions
that are trusted for modifying such variables in-place. However, that
optimization got broken by commit 6c82d8d1fdb1f126, which arranged to share
a single ParamListInfo across most expressions evaluated by a plpgsql
function. We don't want a R/W pointer to be passed to other functions
just because we decided one function was safe! Fortunately, the breakage
was in the other direction, of never passing a R/W pointer at all, because
we'd always have pre-initialized the shared array slot with a R/O pointer.
So it was still functionally correct, but we were back to O(N^2)
performance for repeated use of "a := a || x". To fix, force an unshared
param array to be used when the R/W param optimization is active.
Commit 6c82d8d1fdb1f126 is in HEAD only, so no need for a back-patch.
Andres Freund [Mon, 17 Aug 2015 09:15:46 +0000 (11:15 +0200)]
Improve configure test for the sse4.2 crc instruction.
With optimizations enabled at least one compiler, clang 3.7, optimized
away the crc intrinsics knowing that the result went on unused and has
no side effects. That can trigger errors in code generation when the
intrinsic is used, as we chose to use the intrinsics without any
additional compiler flag. Return the computed value to prevent that.
With some more pedantic warning flags (-Wold-style-definition) the
configure test failed to recognize the existence of _mm_crc32_u*
intrinsics due to an independent warning in the test because the test
turned on -Werror, but that's not actually needed here.
Discussion: 20150814092039.GH4955@awork2.anarazel.de
Backpatch: 9.5, where the use of crc intrinsics was integrated.
Tom Lane [Sat, 15 Aug 2015 18:31:04 +0000 (14:31 -0400)]
Add docs about postgres_fdw's setting of search_path and other GUCs.
This behavior wasn't documented, but it should be because it's user-visible
in triggers and other functions executed on the remote server.
Per question from Adam Fuchs.
Tom Lane [Sat, 15 Aug 2015 17:30:16 +0000 (13:30 -0400)]
Improve documentation about MVCC-unsafe utility commands.
The table-rewriting forms of ALTER TABLE are MVCC-unsafe, in much the same
way as TRUNCATE, because they replace all rows of the table with newly-made
rows with a new xmin. (Ideally, concurrent transactions with old snapshots
would continue to see the old table contents, but the data is not there
anymore --- and if it were there, it would be inconsistent with the table's
updated rowtype, so there would be serious implementation problems to fix.)
This was nowhere documented though, and the problem was only documented for
TRUNCATE in a note in the TRUNCATE reference page. Create a new "Caveats"
section in the MVCC chapter that can be home to this and other limitations
on serializable consistency.
In passing, fix a mistaken statement that VACUUM and CLUSTER would reclaim
space occupied by a dropped column. They don't reconstruct existing tuples
so they couldn't do that.
Tom Lane [Sat, 15 Aug 2015 16:00:36 +0000 (12:00 -0400)]
Repair unsafe use of shared typecast-lookup table in plpgsql DO blocks.
DO blocks use private simple_eval_estates to avoid intra-transaction memory
leakage, cf commit c7b849a89. I had forgotten about that while writing
commit 0fc94a5ba, but it means that expression execution trees created
within a DO block disappear immediately on exiting the DO block, and hence
can't safely be linked into plpgsql's session-wide cast hash table.
To fix, give a DO block a private cast hash table to go with its private
simple_eval_estate. This is less efficient than one could wish, since
DO blocks can no longer share any cast lookup work with other plpgsql
execution, but it shouldn't be too bad; in any case it's no worse than
what happened in DO blocks before commit 0fc94a5ba.
Per bug #13571 from Feike Steenbergen. Preliminary analysis by
Oleksandr Shulgin.
Andres Freund [Sat, 15 Aug 2015 15:25:00 +0000 (17:25 +0200)]
Don't use function definitions looking like old-style ones.
This fixes a bunch of somewhat pedantic warnings with new
compilers. Since by far the majority of other functions definitions use
the (void) style it just seems to be consistent to do so as well in the
remaining few places.
Andres Freund [Sat, 15 Aug 2015 15:02:47 +0000 (17:02 +0200)]
Correct type of waitMode variable in ExecInsertIndexTuples().
It was a bool, even though it should be CEOUC_WAIT_MODE. That's unlikely
to have a negative effect with the current definition of bool (char),
but it's definitely wrong.
Discussion: 20150812084351.GD8470@awork2.anarazel.de
Backpatch: 9.5, where ON CONFLICT was merged
Andres Freund [Wed, 12 Aug 2015 14:49:36 +0000 (16:49 +0200)]
vacuumdb: Don't assign negative values to a boolean.
Since a17923204736 (vacuumdb: enable parallel mode) -1 has been assigned
to a boolean. That can, justifiedly, trigger compiler warnings. There's
also no need for ternary logic, result was only ever set to 0 or -1. So
don't.
Andres Freund [Wed, 12 Aug 2015 14:02:20 +0000 (16:02 +0200)]
Don't use 'bool' as a struct member name in help_config.c.
Doing so doesn't work if bool is a macro rather than a typedef.
Although c.h spends some effort to support configurations where bool is
a preexisting macro, help_config.c has existed this way since
2003 (b700a6), and there have not been any reports of
problems. Backpatch anyway since this is as riskless as it gets.
Robert Haas [Sat, 15 Aug 2015 02:39:09 +0000 (22:39 -0400)]
Remove bogus step from test_decoding isolation tests.
Commit 43b4a16817c8b5568cec72f3b0e1c8209f5ac7f7 made the isolation
tester reject duplicate step names, and it turns out that the
test_decoding module's concurrent_ddl_dml isolation test has a
duplicate name. I think the second definition isn't actually getting
used, so just remove it.
Noah Misch [Sat, 15 Aug 2015 00:23:13 +0000 (20:23 -0400)]
Encoding PG_UHC is code page 949.
This fixes presentation of non-ASCII messages to the Windows event log
and console in rare cases involving Korean locale. Processes like the
postmaster and checkpointer, but not processes attached to databases,
were affected. Back-patch to 9.4, where MessageEncoding was introduced.
The problem exists in all supported versions, but this change has no
effect in the absence of the code recognizing PG_UHC MessageEncoding.
Noticed while investigating bug #13427 from Dmitri Bourlatchkov.
Noah Misch [Sat, 15 Aug 2015 00:23:09 +0000 (20:23 -0400)]
Restore old pgwin32_message_to_UTF16() behavior outside transactions.
Commit 49c817eab78c6f0ce8c3bf46766b73d6cf3190b7 replaced with a hard
error the dubious pg_do_encoding_conversion() behavior when outside a
transaction. Reintroduce the historic soft failure locally within
pgwin32_message_to_UTF16(). This fixes errors when writing messages in
less-common encodings to the Windows event log or console. Back-patch
to 9.4, where the aforementioned commit first appeared.
Simon Riggs [Fri, 14 Aug 2015 13:19:28 +0000 (14:19 +0100)]
Reduce lock levels for ALTER TABLE SET autovacuum storage options
Reduce lock levels down to ShareUpdateExclusiveLock for all autovacuum-related
relation options when setting them using ALTER TABLE.
Add infrastructure to allow varying lock levels for relation options in later
patches. Setting multiple options together uses the highest lock level required
for any option. Works for both main and toast tables.
Fabrízio Mello, reviewed by Michael Paquier, mild edit and additional regression
tests from myself
The error message wording for AttributeError has changed in Python 3.5.
For the plpython_error test, add a new expected file. In the
plpython_subtransaction test, we didn't really care what the exception
is, only that it is something coming from Python. So use a generic
exception instead, which has a message that doesn't vary across
versions.
Alvaro Herrera [Thu, 13 Aug 2015 17:41:52 +0000 (14:41 -0300)]
Re-add BRIN isolation test
This time, instead of using a core isolation test, put it on its own
test module; this way it can require the pageinspect module to be
present before running.
The module's Makefile is loosely modeled after test_decoding's, so that
it's easy to add further tests for either pg_regress or isolationtester
later.
Tom Lane [Thu, 13 Aug 2015 17:25:01 +0000 (13:25 -0400)]
Improve regression test case to avoid depending on system catalog stats.
In commit 95f4e59c32866716 I added a regression test case that examined
the plan of a query on system catalogs. That isn't a terribly great idea
because the catalogs tend to change from version to version, or even
within a version if someone makes an unrelated regression-test change that
populates the catalogs a bit differently. Usually I try to make planner
test cases rely on test tables that have not changed since Berkeley days,
but I got sloppy in this case because the submitted crasher example queried
the catalogs and I didn't spend enough time on rewriting it. But it was a
problem waiting to happen, as I was rudely reminded when I tried to port
that patch into Salesforce's Postgres variant :-(. So spend a little more
effort and rewrite the query to not use any system catalogs. I verified
that this version still provokes the Assert if 95f4e59c32866716's code fix
is reverted.
I also removed the EXPLAIN output from the test, as it turns out that the
assertion occurs while considering a plan that isn't the one ultimately
selected anyway; so there's no value in risking any cross-platform
variation in that printout.
Alvaro Herrera [Thu, 13 Aug 2015 16:02:10 +0000 (13:02 -0300)]
Use materialize SRF mode in brin_page_items
This function was using the single-value-per-call mechanism, but the
code relied on a relcache entry that wasn't kept open across calls.
This manifested as weird errors in buildfarm during the short time that
the "brin-1" isolation test lived.
Run autoheader to add a few missing #defines to pg_config.h.in.
These are emitted by the new ax_pthread.m4 script version. They are not
used for anything in PostgreSQL, but let's keep the generated header file
up-to-date.
Tom Lane [Thu, 13 Aug 2015 01:18:45 +0000 (21:18 -0400)]
Undo mistaken tightening in join_is_legal().
One of the changes I made in commit 8703059c6b55c427 turns out not to have
been such a good idea: we still need the exception in join_is_legal() that
allows a join if both inputs already overlap the RHS of the special join
we're checking. Otherwise we can miss valid plans, and might indeed fail
to find a plan at all, as in recent report from Andreas Seltenreich.
That code was added way back in commit c17117649b9ae23d, but I failed to
include a regression test case then; my bad. Put it back with a better
explanation, and a test this time. The logic does end up a bit different
than before though: I now believe it's appropriate to make this check
first, thereby allowing such a case whether or not we'd consider the
previous SJ(s) to commute with this one. (Presumably, we already decided
they did; but it was confusing to have this consideration in the middle
of the code that was handling the other case.)
Back-patch to all active branches, like the previous patch.
Alvaro Herrera [Wed, 12 Aug 2015 17:20:38 +0000 (14:20 -0300)]
Close some holes in BRIN page assignment
In some corner cases, it is possible for the BRIN index relation to be
extended by brin_getinsertbuffer but the new page not be used
immediately for anything by its callers; when this happens, the page is
initialized and the FSM is updated (by brin_getinsertbuffer) with the
info about that page, but these actions are not WAL-logged. A later
index insert/update can use the page, but since the page is already
initialized, the initialization itself is not WAL-logged then either.
Replay of this sequence of events causes recovery to fail altogether.
There is a related corner case within brin_getinsertbuffer itself, in
which we extend the relation to put a new index tuple there, but later
find out that we cannot do so, and do not return the buffer; the page
obtained from extension is not even initialized. The resulting page is
lost forever.
To fix, shuffle the code so that initialization is not the
responsibility of brin_getinsertbuffer anymore, in normal cases;
instead, the initialization is done by its callers (brin_doinsert and
brin_doupdate) once they're certain that the page is going to be used.
When either those functions determine that the new page cannot be used,
before bailing out they initialize the page as an empty regular page,
enter it in FSM and WAL-log all this. This way, the page is usable for
future index insertions, and WAL replay doesn't find trying to insert
tuples in pages whose initialization didn't make it to the WAL. The
same strategy is used in brin_getinsertbuffer when it cannot return the
new page.
Additionally, add a new step to vacuuming so that all pages of the index
are scanned; whenever an uninitialized page is found, it is initialized
as empty and WAL-logged. This closes the hole that the relation is
extended but the system crashes before anything is WAL-logged about it.
We also take this opportunity to update the FSM, in case it has gotten
out of date.
Thanks to Heikki Linnakangas for finding the problem that kicked some
additional analysis of BRIN page assignment code.
projects / postgresql / log