Eric Christopher [Mon, 16 Nov 2015 18:29:59 +0000 (18:29 +0000)]
When producing error messages for always_inline functions with the
target attribute, don't include "negative" subtarget features in the
list of required features. Builtins are positive by default so don't
need this change, but we pull the default list of features from the
command line and so need to make sure that we only include features
that are turned on for code generation in our error.
Oliver Stannard [Mon, 16 Nov 2015 14:58:50 +0000 (14:58 +0000)]
[ARM,AArch64] Fix __rev16l and __rev16ll intrinsics
These two intrinsics are defined in arm_acle.h.
__rev16l needs to rotate by 16 bits, bit it was actually rotating by 2 bits.
For AArch64, where long is 64 bits, this would still be wrong.
__rev16ll was incorrect, it reversed the bytes in each 32-bit word, rather than
each 16-bit halfword. The correct implementation is to apply __rev16 to the top
and bottom words of the 64-bit value.
For AArch32 targets, these get compiled down to the hardware rev16 instruction
at -O1 and above. For AArch64 targets, the 64-bit ones get compiled to two
32-bit rev16 instructions, because there is not currently a pattern for the
64-bit rev16 instruction.
Daniel Jasper [Mon, 16 Nov 2015 12:38:56 +0000 (12:38 +0000)]
clang-format: Enable #include sorting by default.
This has seen quite some usage and I am not aware of any issues. Also
add a style option to enable/disable include sorting. The existing
command line flag can from now on be used to override whatever is set
in the style.
Keno Fischer [Mon, 16 Nov 2015 09:04:13 +0000 (09:04 +0000)]
[CGDebugInfo] Set the size and align for reference types
In r253186, I changed the DIBuilder API to now take size and align
for reference types as well. This was done in preparation for upcoming
changes to the Verifier that will validate that sizes match between
DI types and IR values that are declared as having those types.
This updates clang to actually pass the information through.
Devin Coughlin [Sun, 15 Nov 2015 17:48:22 +0000 (17:48 +0000)]
[analyzer] Handle calling ObjC super method from inside C++ lambda.
When calling a ObjC method on super from inside a C++ lambda, look at the
captures to find "self". This mirrors how the analyzer handles calling super in
an ObjC block and fixes an assertion failure.
Craig Topper [Sun, 15 Nov 2015 03:32:11 +0000 (03:32 +0000)]
Fix a layering oddity by passing Sema to DeclSpec::Finish instead of DiagnosticsEngine and Preprocessor. Everything the preprocessor was being used for can be acquired from Sema.
Devin Coughlin [Sun, 15 Nov 2015 03:07:17 +0000 (03:07 +0000)]
[analyzer] Refer to capture field to determine if capture is reference.
The analyzer incorrectly treats captures as references if either the original
captured variable is a reference or the variable is captured by reference.
This causes the analyzer to crash when capturing a reference type by copy
(PR24914). Fix this by refering solely to the capture field to determine when a
DeclRefExpr for a lambda capture should be treated as a reference type.
David Majnemer [Sun, 15 Nov 2015 03:04:34 +0000 (03:04 +0000)]
[Sema] Don't crash trying to diagnose abs called on a pointer type
Clang tries to figure out if a call to abs is suspicious by looking
through implicit casts to look at the underlying, implicitly converted
type.
Interestingly, C has implicit conversions from pointer-ish types like
function to less exciting types like int. This trips up our 'abs'
checker because it doesn't know which variant of 'abs' is appropriate.
Instead, diagnose 'abs' called on function types upfront. This sort of
thing is highly suspicious and is likely indicative of a missing
pointer dereference/function call/array index operation.
Eric Christopher [Sat, 14 Nov 2015 02:38:37 +0000 (02:38 +0000)]
Add support for the always_inline + target feature diagnostic to print
out the first missing target feature that's required and reword
the diagnostic accordingly.
David Blaikie [Sat, 14 Nov 2015 01:10:38 +0000 (01:10 +0000)]
Make some tests LLVM-optimization agnostic and remove some others that were beyond value/repair
Several of these tests (the two deleted, and the one removal edit) were
relying on the optimizer to collapse things to test some frontend
feature. The tests were really old and features seemed amply covered by
other parts of the test suite, so I just removed them.
If anyone thinks they're valuable enough to keep/fix, we can play around
with that, for sure.
Juergen Ributzka [Fri, 13 Nov 2015 19:08:07 +0000 (19:08 +0000)]
Fix auto-link for text-based dynamic library SDKs.
When linking against text-based dynamic library SDKs the library name of a
framework has now more than one possible filename extensions. This fix tests for
both possible extensions (none, and .tbd).
Richard Smith [Fri, 13 Nov 2015 05:14:45 +0000 (05:14 +0000)]
[modules] When a declaration has non-trivial visibility, check whether it's
actually hidden before we check its linkage. This avoids computing the linkage
"too early" for an anonymous struct with a typedef name for linkage.
Richard Smith [Fri, 13 Nov 2015 03:52:13 +0000 (03:52 +0000)]
[modules] Follow the C++ standard's rule for linkage of enumerators: they have
the linkage of the enumeration. For enumerators of unnamed enumerations, extend
the -Wmodules-ambiguous-internal-linkage extension to allow selecting an
arbitrary enumerator (but only if they all have the same value, otherwise it's
ambiguous).
Richard Smith [Thu, 12 Nov 2015 22:19:45 +0000 (22:19 +0000)]
[modules] Simplify and generalize the existing rule for finding hidden
declarations in redeclaration lookup. A declaration is now visible to
lookup if:
* It is visible (not in a module, or in an imported module), or
* We're doing redeclaration lookup and it's externally-visible, or
* We're doing typo correction and looking for unimported decls.
We now support multiple modules having different internal-linkage or no-linkage
definitions of the same name for all entities, not just for functions,
variables, and some typedefs. As previously, if multiple such entities are
visible, any attempt to use them will result in an ambiguity error.
This patch fixes the linkage calculation for a number of entities where we
previously didn't need to get it right (using-declarations, namespace aliases,
and so on). It also classifies enumerators as always having no linkage, which
is a slight deviation from the C++ standard's definition, but not an observable
change outside modules (this change is being discussed on the -core reflector
currently).
This also removes the prior special case for tag lookup, which made some cases
of this work, but also led to bizarre, bogus "must use 'struct' to refer to type
'Foo' in this scope" diagnostics in C++.
Richard Smith [Thu, 12 Nov 2015 22:04:34 +0000 (22:04 +0000)]
DR407: Rationalize how we handle tags being hidden by typedefs. Even with
DR407, the C++ standard doesn't really say how this should work. Here's what we
do (which is consistent with DR407 as far as I can tell):
* When performing name lookup for an elaborated-type-specifier, a tag
declaration hides a typedef declaration that names the same type.
* When performing any other kind of lookup, a typedef declaration hides
a tag declaration that names the same type.
In any other case where lookup finds both a typedef and a tag (that is, when
they name different types), the lookup will be ambiguous. If lookup finds a
tag and a typedef that name the same type, and finds anything else, the lookup
will always be ambiguous (even if the other entity would hide the tag, it does
not also hide the typedef).
Richard Smith [Thu, 12 Nov 2015 21:55:58 +0000 (21:55 +0000)]
Revert r240335.
This failed to solve the problem it was aimed at, and introduced just as many
issues as it resolved. Realistically, we need to deal with the possibility that
multiple modules might define different internal linkage symbols with the same
name, and this isn't a problem unless two such symbols are simultaneously
visible.
The case where two modules define equivalent internal linkage symbols is
handled by r252063: if lookup finds multiple sufficiently-similar entities from
different modules, we just pick one of them as an extension (but we keep them
separate).
James Y Knight [Thu, 12 Nov 2015 18:37:29 +0000 (18:37 +0000)]
Correct atomic libcall support for __atomic_*_fetch builtins.
In r244063, I had caused these builtins to call the same-named library
functions, __atomic_*_fetch_SIZE. However, this was incorrect: while
those functions are in fact supported by GCC's libatomic, they're not
documented by the spec (and gcc doesn't ever call them).
Instead, you're /supposed/ to call the __atomic_fetch_* builtins and
then redo the operation inline to return the final value.
James Molloy [Thu, 12 Nov 2015 15:36:04 +0000 (15:36 +0000)]
[C++] Add the "norecurse" attribute to main() if in C++ mode
The C++ spec (3.6.1.3) says "The function `main` shall not be used within a program". This implies that it cannot recurse, so add the norecurse attribute to help the midend out a bit.
Re-recommit: Add support for the new mips-mti-linux toolchain.
Last time, this caused two Windows buildbots and a single ARM buildbot to fail.
I XFAIL'd the failing test on win32,win64 machines in order to see if the ARM
buildbot complains again.
This function permits the mangling of a C++ 'structor. Depending on the ABI and
the declaration, the declaration may contain more than one associated symbol for
a given declaration. This allows the consumer to retrieve all of the associated
symbols for the declaration the cursor points to.
Eric Christopher [Thu, 12 Nov 2015 00:44:12 +0000 (00:44 +0000)]
Provide a frontend based error for always_inline functions that require
target features that the caller function doesn't provide. This matches
the existing backend failure to inline functions that don't have
matching target features - and diagnoses earlier in the case of
always_inline.
Fix up a few test cases that were, in fact, invalid if you tried
to generate code from the backend with the specified target features
and add a couple of tests to illustrate what's going on.
Manman Ren [Wed, 11 Nov 2015 22:42:31 +0000 (22:42 +0000)]
[TLS on Darwin] change how we handle globals with linkonce or weak linkage.
This is about how we handle static member of a template. Before this commit,
we use internal linkage for the IR thread-local variable, which is inefficient.
With this commit, we will start to follow Itanium C++ ABI.
Devin Coughlin [Wed, 11 Nov 2015 20:39:03 +0000 (20:39 +0000)]
[analyzer] Fix scan-build to handle missing output directories.
Cwd::abs_path has a somewhat tricky semantics: if it's operand directory does not exist,
it'll return undefined (see https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=257568).
This may cause scan-build to silently ignore output directory (specified with -o) and
use /tmp instead of trying to create directory. This tiny patch fixes the problem.