[X86] Add ANY_EXTEND to switch in ReplaceNodeResults, but just fall back to default handling.
ANY_EXTEND of v8i8 is marked Custom on AVX512 for handling extends
from v8i8. But the type legalization infrastructure will call
ReplaceNodeResults for v8i8 results. We should just defer it the
default handling instead of asserting in the default of the switch.
[AArch64][GlobalISel] Support lowering variadic musttail calls
This adds support for lowering variadic musttail calls. To do this, we have
to...
- Detect a musttail call in a variadic function before attempting to lower the
call's formal arguments. This is done in the IRTranslator.
- Compute forwarded registers in `lowerFormalArguments`, and add copies for
those registers.
- Restore the forwarded registers in `lowerTailCall`.
Because there doesn't seem to be any nice way to wrap these up into the outgoing
argument handler, the restore code in `lowerTailCall` is done separately.
Also, irritatingly, you have to make sure that the registers don't overlap with
any passed parameters. Otherwise, the scheduler doesn't know what to do with the
extra copies and asserts.
Add call-translator-variadic-musttail.ll to test this. This is pretty much the
same as the X86 musttail-varargs.ll test. We didn't have as nice of a test to
base this off of, but the idea is the same.
Paul Robinson [Mon, 30 Sep 2019 15:11:23 +0000 (15:11 +0000)]
[SSP] [3/3] cmpxchg and addrspacecast instructions can now
trigger stack protectors. Fixes PR42238.
Add test coverage for llvm.memset, as proxy for all llvm.mem*
intrinsics. There are two issues here: (1) they could be lowered to a
libc call, which could be intercepted, and do Bad Stuff; (2) with a
non-constant size, they could overwrite the current stack frame.
The test was mostly written by Matt Arsenault in r363169, which was
later reverted; I tweaked what he had and added the llvm.memset part.
Summary:
Remove use of FileCheckPatternContext and FileCheckString concrete types
from FileCheck API to allow moving it and the other implementation only
only declarations into a private header file.
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Sam Parker [Mon, 30 Sep 2019 08:03:23 +0000 (08:03 +0000)]
[ARM][MVE] Change VCTP operand
The VCTP instruction will calculate the predicate masked based upon
the number of elements that need to be processed. I had inserted the
sub before the vctp intrinsic and supplied it as the operand, but
this is incorrect as the phi should directly feed the vctp. The sub
is calculating the value for the next iteration.
[TargetLowering] Simplify expansion of S{ADD,SUB}O
ISD::SADDO uses the suggested sequence described in the section §2.4 of
the RISCV Spec v2.2. ISD::SSUBO uses the dual approach but checking for
(non-zero) positive.
Sam Parker [Mon, 30 Sep 2019 07:52:10 +0000 (07:52 +0000)]
[ARM][CGP] Allow signext arguments
As we perform a zext on any arguments used in the promoted tree, it
doesn't matter if they're marked as signext. The only permitted
user(s) in the tree which would interpret the sign bits are signed
icmps. For these instructions, their promoted operands are truncated
before the icmp uses them.
Tim Northover [Mon, 30 Sep 2019 07:46:52 +0000 (07:46 +0000)]
Revert "[SCEV] add no wrap flag for SCEVAddExpr."
This reverts r366419 because the analysis performed is within the context of
the loop and it's only valid to add wrapping flags to "global" expressions if
they're always correct.
The tool reports verbose output for the DWARF debug location coverage.
The llvm-locstats for each variable or formal parameter DIE computes what
percentage from the code section bytes, where it is in scope, it has
location description. The line 0 shows the number (and the percentage) of
DIEs with no location information, but the line 100 shows the number (and
the percentage) of DIEs where there is location information in all code
section bytes (where the variable or parameter is in the scope). The line
50..59 shows the number (and the percentage) of DIEs where the location
information is in between 50 and 59 percentage of its scope covered.
[X86] Remove -x86-experimental-vector-widening-legalization command line flag
This was added back to allow some performance regressions to be
investigated. The main perf issue was fixed shortly after adding
this back and no other major issues have been reported. So I
think its safe to remove this again.
[X86] Add custom isel logic to match VPTERNLOG from 2 logic ops.
There's room from improvement here, but this is a decent
starting point.
There are a few minor regressions in the vector-rotate tests,
where we are now forming a vpternlog from an and before we get
a chance to form it for a bitselect that we were matching
previously. This results in an AND and an ANDN feeding the
vpternlog where previously we just had an AND after the
vpternlog. I think we can probably DAG combine the AND with
the bitselect to get back to similar codegen.
Moves existing article links on the Programming, Subsystem, and Reference documentation pages to new locations. Also moves Github Repository and Publications links to the sidebar.
Fangrui Song [Sun, 29 Sep 2019 15:26:12 +0000 (15:26 +0000)]
[MC] Emit unused undefined symbol even if its binding is not set
For the following two cases, we currently suppress the symbols. This
patch emits them (compatible with GNU as).
* `test2_a = undef`: if `undef` is otherwise unused.
* `.hidden hidden`: if `hidden` is unused. This is the main point of the
patch, because omitting the symbol would cause a linker semantic
difference.
It causes a behavior change that is not compatible with GNU as:
.weakref foo1, bar1
When neither foo1 nor bar1 is used, we now emit bar1, which is arguably
more consistent.
Another change is that we will emit .TOC. for .TOC.@tocbase . For this
directive, suppressing .TOC. can be seen as a size optimization, but we
choose to drop it for simplicity and consistency.
Roman Lebedev [Sun, 29 Sep 2019 15:25:24 +0000 (15:25 +0000)]
[DivRemPairs] Don't assert that we won't ever get expanded-form rem pairs in different BB's (PR43500)
If we happen to have the same div in two basic blocks,
and in one of those we also happen to have the rem part,
we'd match the div-rem pair, but the wrong ones.
So let's drop overly-ambiguous assert.
[SLP] Fix for PR31847: Assertion failed: (isLoopInvariant(Operands[i], L) && "SCEVAddRecExpr operand is not loop-invariant!")
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
David Green [Sun, 29 Sep 2019 08:38:48 +0000 (08:38 +0000)]
[ARM] Cortex-M4 schedule additions
This is an attempt to fill in some of the missing instructions from the
Cortex-M4 schedule, and make it easier to do the same for other ARM cpus.
- Some instructions are marked as hasNoSchedulingInfo as they are pseudos or
otherwise do not require scheduling info
- A lot of features have been marked not supported
- Some WriteRes's have been added for cvt instructions.
- Some extra instruction latencies have been added, notably by relaxing the
regex for dsp instruction to catch more cases, and some fp instructions.
This goes a long way to get the CompleteModel working for this CPU. It does not
go far enough as to get all scheduling info for all output operands correct.
[X86] Move bitselect matching to vpternlog into X86ISelDAGToDAG.cpp
This allows us to reduce the use count on the condition node before
the match. This enables load folding for that operand without
relying on the peephole pass. This will be improved on for
broadcast load folding in a subsequent commit.
This still requires a bunch of isel patterns for vXi16/vXi8 types
though.
[PowerPC] make tests immune to improved undef handling
The fma mutate test will not exercise what it was intended to test
once we simplify those ops immediately, but the test will still
pass with the existing CHECKs, so I'm leaving it in case that
still has minimal value.
Add an operand to memory intrinsics to denote the "tail" marker.
We need to propagate this information from the IR in order to be able to safely
do tail call optimizations on the intrinsics during legalization. Assuming
it's safe to do tail call opt without checking for the marker isn't safe because
the mem libcall may use allocas from the caller.
This adds an extra immediate operand to the end of the intrinsics and fixes the
legalizer to handle it.
[X86] Stop using UpdateNodeOperands in combineGatherScatter. Create new nodes like most other DAG combines.
Creating new nodes is what we usually do. Have to explicitly
check that we don't update to an existing node and having
to manually manage the worklist is unusual.
We can probably add a helper function to reduce the duplication
of having to check if we should create a gather or scatter, but
I wanted to just get the simple thing done.
[X86] Split combineGatherScatter into a version for generic ISD nodes and another version for X86 specific nodes.
The majority of the code doesn't run on the X86 nodes today since
its gated by isBeforeLegalizeOps and we don't formm X86 nodes
until after that. Except for a couple special case in type
legalization. But I think we would probably break those if
some of the transforms fire on them.
I want to remove the hardcoded operand numbers and the unusual
use of UpdateNodeOperands. Being able to know which ISD opcodes
are present should help with that.
Wei Mi [Fri, 27 Sep 2019 22:33:59 +0000 (22:33 +0000)]
[SampleFDO] Create a separate flag profile-accurate-for-symsinlist to handle
profile symbol list.
Currently many existing users using profile-sample-accurate want to reduce
code size as much as possible. Their use cases are different from the scenario
profile symbol list tries to handle -- the major motivation of adding profile
symbol list is to get the major memory/code size saving without introduce
performance regression. So to keep the behavior of profile-sample-accurate
unchanged, we think decoupling these two things and using a new flag to
control the handling of profile symbol list may be better.
When profile-sample-accurate and the new flag profile-accurate-for-symsinlist
are both present, since profile-sample-accurate is a user assertion we let it
have a higher precedence.
m_ZExtOrSExtOrSelf() is motivated by the D68103/r373106 :
sometimes it is useful to look past any extensions of the shift amount,
and m_ZExtOrSExtOrSelf() may be exactly the tool to do that.
Roman Lebedev [Fri, 27 Sep 2019 19:32:43 +0000 (19:32 +0000)]
[NFC][PhaseOrdering] Add end-to-end tests for the 'two shifts by sext' problem
We start with two separate sext's, but EarlyCSE runs before InstCombine,
so when we get them, they are a single sext, and we just ignore that.
Likewise, if we had a single sext, we don't do anything there.
Adds a section to the User Guides page for articles related to building, packaging, and distributing LLVM. Includes sub-sections for CMake, Clang, and Docker.
(This isn't so for funnel shifts, there it's illegal for e.g. i6->i7.)
Main motivation is the C++ semantics:
```
int shl(int a, char b) {
return a << b;
}
```
ends as
```
%3 = sext i8 %1 to i32
%4 = shl i32 %0, %3
```
https://godbolt.org/z/0jgqUq
which is, as this shows, too pessimistic.
There is another problem here - we can only do the fold
if sext is one-use. But we can trivially have cases
where several shifts have the same sext shift amount.
This should be resolved, later.
Kai Nacke [Fri, 27 Sep 2019 16:19:15 +0000 (16:19 +0000)]
Change -march=systemz to triple and fix test
These two test cases use -march=systemz instead of a triple. In
particular, the used file format is then based on the default host
triple. This leads to different behaviour on different platforms.
The SystemZ implementation uses the integrated assembler for a
long time now. The mature-mc-support test can be fully enabled.
The static analyzer is warning about a potential null dereference, but we should be able to use cast<FunctionSummary> directly and if not assert will fire for us.
Luis Marques [Fri, 27 Sep 2019 15:49:10 +0000 (15:49 +0000)]
[RISCV] Rename FPRs and use Register arithmetic
The new names for FPRs ensure that the Register values within the same class are
enumerated consecutively (the order is determined by the `LessRecordRegister`
function object). Where there were tables mapping between 32- and 64-bit FPRs
(and vice versa) this patch replaces them with Register arithmetic. The
enumeration order between different register classes is expected to continue to
be arbitrary, although it does impact the conversion from the (overloaded) asm
FPR names to Register values, and therefore might require updates to the target
if the sorting algorithm is changed. Static asserts were added to ensure that
changes to the ordering that would impact the current implementation are
detected.
The static analyzer is warning about a potential null dereference, but we should be able to use cast<StructType> directly and if not assert will fire for us.
[DebugInfo] Exclude memory location values as parameter entry values
Abandon describing of loaded values due to safety concerns. Loaded
values are described as derefed memory location at caller point.
At callee we can unintentionally change that memory location which
would lead to different entry being printed value before and after
the memory location clobbering. This problem is described in
llvm.org/PR43343.
[CodeGenPrepare] Mend "avoid crashing from replacing a phi twice" fix.
Summary:
An erroneously negated if-statement by an earlier (March 2019) bugfix left phi replacement/simplification under optimizeMemoryInst() in CodeGenPrepare largely inactivated. The error was found when csmith found that the same assert as in the original bug report could still be triggered in a different way. This patch fixes the bugfix. The original bug was:
https://bugs.llvm.org/show_bug.cgi?id=41052
... and the previous fix was D59358.
[llvm-exegesis] Add loop mode for repeating the snippet.
Summary:
Before this change the Executable function was made by duplicating the
snippet. This change adds a --repetion-mode={loop|duplicate} flag that
allows choosing between this behaviour and wrapping the snippet instructions
in a loop.
The new mode can help measurements when the snippet fits in the DSB by
short-cirtcuiting decoding. The loop adds a dec + jmp to the measurements, but
since these are not part of the critical path, they execute in parallel
with the measured code and do not impact measurements in practice.
Overview of the change:
- New SnippetRepetitor abstraction that handles repeating the snippet.
The assembler delegates repeating the instructions to this class.
- ExegesisTarget learns how to decrement loop counter and jump.
- Some refactoring of the assembler into FunctionFiller/BasicBlockFiller.
Simon Pilgrim [Fri, 27 Sep 2019 10:04:16 +0000 (10:04 +0000)]
[UpdateTestChecks] Fix wildcard support on DOS prompts
D64572 / rL365818 changed the way that the file paths were collected, which meant we lost the file pattern expansion necessary when working with DOS command prompt
projects / llvm / log