Yunqing Wang [Wed, 18 Sep 2013 17:36:21 +0000 (10:36 -0700)]
Fix x86inc.asm to build PIC code correctly
Current x86inc.asm didn't handle 32bit PIC build properly.
TEXTRELs were seen in the library built. The PIC macros from
libvpx's x86_abi_support.asm was used to fix this problem.
The assembly code was modified to use the macros.
Notes: We need this fix in for decoder building. Functions in
encoder will be fixed later.
Adrian Grange [Thu, 12 Sep 2013 16:35:04 +0000 (09:35 -0700)]
Modified resize unit test to output test vector
Modified the resize unit test so that it optionally
writes the encoded bitstream to file. The macro
WRITE_COMPRESSED_STREAM should be set to 1 to enable
output of the test bitstream; it is set to 0 by default.
Adrian Grange [Mon, 16 Sep 2013 18:46:00 +0000 (11:46 -0700)]
Fix failure to copy data files if content changes
Jenkins was failing to detect the case where an existing
file is recreated with new content. In this case, thinking
that the file already existed, Jenkins did not re-copy the
file as it should have.
By adding the file test-data.sha1 as a dependendency to
the LIBVPX_TEST_DATA build target the files will be
recopied if the MD5 of an existing file changes.
This could be further improved to only copy files that
have changed rather than copying the whole set as done in
this patch.
(Thanks to jzern@ who diagnozed ithe problem and suggested
this fix).
The commit added reset of pred_mv at the beginning of each SB64x64
partition mv search, also limited the usage of pred_mv only when
search on the largest partition is already done. This is to fix
a crash at speed 1/2 encoder where an invalid mv is used in mv
search.
Jingning Han [Thu, 12 Sep 2013 17:06:47 +0000 (10:06 -0700)]
Adaptive motion search control
This commit enables adaptive constraint on motion search range for
smaller partitions, given the motion vectors of collocated larger
partition as a candidate initial search point.
It makes speed 0 runtime of bus at CIF and 2000 kbps goes from
167s down to 162s (3% speed-up), at 0.01dB performance gains. In
the settings of speed 1, this makes the runtime goes from 33687 ms
to 32142 ms (4.5% speed-up), at 0.03dB performance gains.
Compression performance wise, it gains at speed 1:
derf 0.118%
yt 0.237%
hd 0.203%
stdhd 0.438%
Paul Wilkins [Fri, 13 Sep 2013 12:14:38 +0000 (13:14 +0100)]
Fix VP9_mode_order[]
Mis-merge of the following change managed to break mode order
and delete two mode options (new alt ref and near alt ref)
It also created a situation where we could test two undefined
modes off the end of the VP9_mode_order[] data structure.
"clang warnings : remove split and i4x4_pred fake modes"
"Change Id: I8ef3c*"
Initial testing on Akiyo at speed 2.
101.35 44.567 44.447 improves to
96.82 44.915 44.815
Deb Mukherjee [Wed, 11 Sep 2013 22:16:36 +0000 (15:16 -0700)]
Clean up of the search best filter speed feature
Removes this speed feature since it is very slow and unlikely
to be used in practice. This cleanup removes a bunch of unnecessary
complications in the outer encode loop.
Deb Mukherjee [Tue, 10 Sep 2013 23:13:15 +0000 (16:13 -0700)]
Changes in speed 2 settings
Propose some changes to the speed 2 settings to improve quality.
In particular, turns off the adjust_thresholds_by_speed feature
which improves results by 6%. Also removes the code for
adjust_thresholds_by_speed since it conflicts with the adaptive
rd thresh feature.
Overall, with this change speed 2 is -15.2% from speed 0 settings,
on derf, which is significantly better than -21.6% down before.
Scott LaVarnway [Wed, 11 Sep 2013 17:45:44 +0000 (13:45 -0400)]
New mode_info_context storage -- undo revert
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of pointers to MODE_INFO structs. The
MODE_INFO structs are now stored as a stream (decoder only),
eliminating unnecessary copies and is a little more cache
friendly.
Jingning Han [Mon, 9 Sep 2013 23:02:07 +0000 (16:02 -0700)]
Remove redundant condition check in 32x32 quant
The c code implementation of 32x32 quantization does the zbin check
of all coefficients prior to the quant/dequant loop, hence removing
the redundant zbin check inside the loop. This only affects the
c code version. SSSE3 version does not separate the zbin check out.
Adrian Grange [Tue, 10 Sep 2013 19:02:37 +0000 (12:02 -0700)]
Enable and fix resize_test for VP9
Added the resize_test unit test to the VP9 set.
Set g_in_frames = 0 to avoid a problem when the total
number of frames being encoded is smaller than
g_in_frames. In this case the test will not have
access to the encoded frames and will not be able to
compare them for testing for encoder/decoder mismatch.
Yunqing Wang [Fri, 6 Sep 2013 23:59:55 +0000 (16:59 -0700)]
Stop partition checking when distortion is small
If the current obtained distortion is very small, which happens
for static image case, we pick the current partition type without
further split checking.
This won't affect regular videos. For static videos, we got 10%~12%
encoding speed gain. PSNR was better for some clips, and worse for
others. Overall it was even.
Yunqing Wang [Fri, 6 Sep 2013 00:10:58 +0000 (17:10 -0700)]
Modify encode breakout for static frames
Thank Paul for the suggestions. While turning on static-thresh
for static-image videos, a big jump on bitrate was seen. In this
patch, we detected static frames in the video using first-pass
stats. For different cases, disable encode breakout or reduce
encode breakout threshold to limit the skipping.
More modification need be done to break incorrect partition
picking pattern for static frames while skipping happens.
Paul Wilkins [Thu, 5 Sep 2013 00:15:05 +0000 (17:15 -0700)]
Modified mode skip functionality.
A previous speed feature skipped modes not used in earlier
partitions but this not longer worked as intended following
changes to the partition coding order and in conjunction
with some other speed features (Especially speed 2 and above).
This modified mode skip feature sets a mask after the first X
modes have been tested in each partition depending on the
reference frame of the current best case.
This patch also makes some changes to the order modes are
tested to fit better with this skip functionality.
Initial testing suggests speed and rd hit count improvements
of up to 20% at speed 1. Quality results. (derf -1.9%, std hd +0.23%).
Yaowu Xu [Fri, 23 Aug 2013 23:22:50 +0000 (16:22 -0700)]
Reduce the amount of extension in src frames
The commit changes the border pixel extension from 160 pixel each side
to what is necessary in arnr filter or motion estimation portion, i.e.
16 pixel on top and left side. For right or bottom side, the extension
is changed to either round up image size to multiple of 64 or at least
16 pixels.
Jingning Han [Fri, 6 Sep 2013 23:06:21 +0000 (16:06 -0700)]
Fix overflow issue in 16x16 quantization SSSE3
The 16x16 transform unit test suggested that the peak coefficient
value can reach 32639. This could cause potential overflow issue
in the SSSE3 implmentation of 16x16 block quantization. This commit
fixes this issue by replacing addition with saturated addition.
Deb Mukherjee [Thu, 29 Aug 2013 23:21:44 +0000 (16:21 -0700)]
Support a constant quality mode in VP9
Adds a new end-usage option for constant quality encoding in vpx. This
first version implemented for VP9, encodes all regular inter frames
using the quality specified in the --cq-level= option, while encoding
all key frames and golden/altref frames at a quality better than that.
The current performance on derfraw300 is +0.910% up from bitrate control,
but achieved without multiple recode loops per frame.
The decision for qp for each altref/golden/key frame will be improved
in subsequent patches based on better use of stats from the first pass.
Further, the qp for regular inter frames may also be varied around the
provided cq-level.
Scott LaVarnway [Fri, 6 Sep 2013 16:33:34 +0000 (12:33 -0400)]
New mode_info_context storage
mode_info_context was stored as a grid of MODE_INFO structs.
The grid now constists of a pointer to a MODE_INFO struct and
a "in the image" flag. The MODE_INFO structs are now stored
as a stream, eliminating unnecessary copies and is a little
more cache friendly.
For the test clips used, the decoder performance improved
by ~4.3% (1080p) and ~9.7% (720p).
Patch Set 2: Re-encoded clips with latest. Now ~1.7% (1080p)
and 5.9% (720p).
projects / libvpx / log