Jingning Han [Wed, 11 Feb 2015 18:51:50 +0000 (10:51 -0800)]
Add ref frame rate cost to non-RD mode decision
This commit adds a heuristic rate cost of reference frame to the
non-RD mode decision. It improves the compression performance of
speed -6 by 0.31% and speed -5 by 0.69%.
Adrian Grange [Fri, 14 Nov 2014 23:29:18 +0000 (15:29 -0800)]
Auto-adaptive encoder frame resizing logic
Note: This feature is still in development.
Add an option for the encoder to decide the resolution
at which to encode each frame.
Each KF/GF/ARF goup is tested to see if it would be
better encoded at a lower resolution. At present, each
KF/GF/ARF is coded first at full-size and if the coded
size exceeds a threshold (twice target data rate) at
the maximum active Q then the entire group is encoded
at lower resolution.
This feature is enabled in vpxenc by setting:
--resize-allowed=1
In addition, if the vpxenc command line also specifies
valid frame dimensions using:
--resize-width=XXXX & --resize_height=YYYY
then *all* frames will be encoded at this resolution.
Jingning Han [Mon, 9 Feb 2015 17:48:44 +0000 (09:48 -0800)]
Fix block partition size in fill_mode_info_sb
This commit fixes the sub block partition size used in
fill_mode_info_sb. Previous implementation effectively disabled
the rectangular block sizes. This commit resolved this issue.
Yaowu Xu [Fri, 6 Feb 2015 20:19:32 +0000 (12:19 -0800)]
Correct the miscalculation in uv dimensions
The calculation of required extension used in HBD case was wrong due
to rounding for UV when y dimension is odd. This commit replace the
computation with correct version.
This fixes a crash caused by writting beyond buffer boundary.
Jingning Han [Fri, 6 Feb 2015 01:13:25 +0000 (17:13 -0800)]
Re-arrange inter mode search order in RTC coding flow
This commit makes the ZEROMV mode first in the search order to
ensure that the zero mv is always checked in the RTC coding mode.
It improves the average speed -6 compression performance by 0.3%
in both PSNR and SSIM at no visible speed change.
James Zern [Wed, 4 Feb 2015 03:55:55 +0000 (19:55 -0800)]
vp9: fix segfault w/corrupt data post frame-parallel merge
cm->frame_bufs[].idx values were made consistent in: 61c5e94 Use -1 consistently as invalid buffer idx
update the initialization in swap_frame_buffers() to match.
additionally:
- remove some shadowed variables in the former and marked them volatile
Yunqing Wang [Wed, 4 Feb 2015 20:02:06 +0000 (12:02 -0800)]
Fix high bit depth assembly function bugs
The high bit depth build failed while building for 32bit target.
The bugs were in vp9_highbd_subpel_variance.asm and
vp9_highbd_sad4d_sse2.asm functions. This patch fixed the bugs,
and made 32bit build work.
Tom Finegan [Thu, 5 Feb 2015 00:11:57 +0000 (16:11 -0800)]
Xcode: Fix includes in examples.
The current file's directory, ".", is treated much more literally
when building libvpx examples with Xcode than it is with make, and
clang cannot find common include files included via "./" when those
files actually reside one directory up in the tree.
Jingning Han [Wed, 21 Jan 2015 17:32:23 +0000 (09:32 -0800)]
Account for chroma component costs in RTC mode decision
This commit allows the encoder to account for additional chroma
plane costs in the mode decision process, if the current block
potentially contains significant color change. It improves the
visual quality at very low bit-rates.
The compression performance of dark720p is improved by 12.39% in
speed 6. For jimred at 150 kbps, the PSNR of V component (red)
increased by 0.2 dB, at the expense of about 5% increase in
encoding time. Note that for sequences where the chroma components
are fairly consistent, the encoding time increase is negligible.
On average the rtc set compression performance is improved by
1.172% in PSNR and 1.920% in SSIM.
This patch continues the work to remove frame_parallel_decoding_mode
requirement in VP9 multi-threaded tile decoder. In order to do that,
the frame counts associated to each thread need to be accumulated
together after the frame is decoded.
Yunqing Wang [Fri, 30 Jan 2015 18:14:44 +0000 (10:14 -0800)]
vp9_dthread: pass frame counts to decoder functions
The current multi-threaded tile decoder requires that the videoes
are encoded with frame_parallel_decoding_mode = 1. This requirement
is not necessary, and is better to be removed. This patch includes
the first part of the work.
Johann [Tue, 3 Feb 2015 17:02:50 +0000 (09:02 -0800)]
Use correct buffer size in vp8 subpixel variance
In vp8_sub_pixel_variance8x8_neon the temp2 buffer is only initialized
to kHeight8 * kWidth8. However, in the case that xoffset != 0 and
yoffset == 0, var_filter_block2d_bil_w8 is called with output_width
kHeight8PlusOne.
Thanks to cmugurel for diagnosing and yulius for the patch.
Yaowu Xu [Mon, 2 Feb 2015 16:05:31 +0000 (08:05 -0800)]
adjust rtc setting and threshold
1. Adjusted the threshold for coef update computation based on counts
of tx used, avoid coef update computation when count is low (<20)
2. Move sf->lpf_pick = LPF_PICK_MINIMAL_LPF to speed 8.
hkuang [Tue, 27 Jan 2015 20:26:28 +0000 (12:26 -0800)]
Try again to merge branch 'frame-parallel' into master branch.
In frame parallel decode, libvpx decoder decodes several frames on all
cpus in parallel fashion. If not being flushed, it will only return frame
when all the cpus are busy. If getting flushed, it will return all the
frames in the decoder. Compare with current serial decode mode in which
libvpx decoder is idle between decode calls, libvpx decoder is busy
between decode calls.
Current frame parallel decode will only speed up the decoding for frame
parallel encoded videos. For non frame parallel encoded videos, frame
parallel decode is slower than serial decode due to lack of loopfilter
worker thread.
There are still some known issues that need to be addressed. For example:
decode frame parallel videos with segmentation enabled is not right sometimes.
* frame-parallel:
Add error handling for frame parallel decode and unit test for that.
Fix a bug in frame parallel decode and add a unit test for that.
Add two test vectors to test frame parallel decode.
Add key frame seeking to webmdec and webm_video_source.
Implement frame parallel decode for VP9.
Increase the thread test range to cover 5, 6, 7, 8 threads.
Fix a bug in adding frame parallel unit test.
Add VP9 frame-parallel unit test.
Manually pick "Make the api behavior conform to api spec." from master branch.
Move vp9_dec_build_inter_predictors_* to decoder folder.
Add segmentation map array for current and last frame segmentation.
Include the right header for VP9 worker thread.
Move vp9_thread.* to common.
ctrl_get_reference does not need user_priv.
Seperate the frame buffers from VP9 encoder/decoder structure.
Revert "Revert "Revert "Revert 3 patches from Hangyu to get Chrome to build:"""
Conflicts:
test/codec_factory.h
test/decode_test_driver.cc
test/decode_test_driver.h
test/invalid_file_test.cc
test/test-data.sha1
test/test.mk
test/test_vectors.cc
vp8/vp8_dx_iface.c
vp9/common/vp9_alloccommon.c
vp9/common/vp9_entropymode.c
vp9/common/vp9_loopfilter_thread.c
vp9/common/vp9_loopfilter_thread.h
vp9/common/vp9_mvref_common.c
vp9/common/vp9_onyxc_int.h
vp9/common/vp9_reconinter.c
vp9/decoder/vp9_decodeframe.c
vp9/decoder/vp9_decodeframe.h
vp9/decoder/vp9_decodemv.c
vp9/decoder/vp9_decoder.c
vp9/decoder/vp9_decoder.h
vp9/encoder/vp9_encoder.c
vp9/encoder/vp9_pickmode.c
vp9/encoder/vp9_rdopt.c
vp9/vp9_cx_iface.c
vp9/vp9_dx_iface.c
Yaowu Xu [Thu, 29 Jan 2015 18:22:48 +0000 (10:22 -0800)]
Optimize coef update
1. move the check of search method of USE_TX_8X8 up one level to
avoid operations of build_tree_distributions()
2. count tx used and avoid computaton for coef udpate when one size
is not used at all.
Yunqing Wang [Thu, 29 Jan 2015 19:33:50 +0000 (11:33 -0800)]
Enable use_x86inc for 32bit pic enabled Darwin target
The previous patch "Fix issues in 32bit PIC enabled build" fixed
the x86inc.asm for macho32. Now we can enable use_x86inc while
building libvpx for 32bit pic enabled Darwin target, which makes
the encoder a lot faster(>2X) in this case by turning on the
existing optimizations.
projects / libvpx / log