Eric Wong [Fri, 8 Dec 2006 21:29:56 +0000 (13:29 -0800)]
rerere: record (or avoid misrecording) resolved, skipped or aborted rebase/am
Data in rr-cache isn't valid after a patch application is
skipped or and aborted, so our next commit could be misrecorded
as a resolution of that skipped/failed commit, which is wrong.
git-am --skip, git-rebase --skip/--abort will automatically
invoke git-rerere clear to avoid this.
Also, since git-am --resolved indicates a resolution was
succesful, remember to run git-rerere to record the resolution
(and not surprise the user when the next commit is made).
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Sat, 9 Dec 2006 03:58:50 +0000 (22:58 -0500)]
Documentation: simpler shared repository creation
Take Johannes Schindelin's suggestions for a further simplification of
the shared repository creation using git --bare init-db --shared, and
for a simplified cvsimport using an existing CVS working directory.
Also insert more man page references.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu>
cvs-migration.txt | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-) Signed-off-by: Junio C Hamano <junkio@cox.net>
Jeff King [Sat, 9 Dec 2006 04:04:21 +0000 (23:04 -0500)]
shortlog: fix segfault on empty authorname
The old code looked backwards from the email address to parse the name,
allowing an arbitrary number of spaces between the two. However, in the case
of no name, we looked back too far to the 'author' (or 'Author:') header.
Instead, remove at most one space between name and address.
The bug was triggered by commit febf7ea4bed from linux-2.6.
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Add branch.*.merge warning and documentation update
This patch clarifies the meaning of the branch.*.merge option.
Previously, if branch.*.merge was specified but did not match any
ref, the message "No changes." was not really helpful regarding
the misconfiguration. This patch adds a warning for this.
Signed-off-by: Josef Weidendorfer <Josef.Weidendorfer@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 8 Dec 2006 22:07:45 +0000 (14:07 -0800)]
Fix perl/ build.
An earlier commit f848718a broke the build in perl/ directory by
allowing the Makefile.PL to overwrite the now-tracked Makefile.
Fix this by forcing Makefile.PL to produce its output in
perl.mak as the broken commit originally intended.
Eric Wong [Fri, 8 Dec 2006 10:20:17 +0000 (02:20 -0800)]
git-svn: use do_switch for --follow-parent if the SVN library supports it
do_switch works with the SVN Perl bindings after r22312 in the
Subversion trunk. Since no released version of SVN currently
supports it; we'll just autodetect it and enable its usage
when a user has a recent-enough version of SVN.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Fri, 8 Dec 2006 06:27:21 +0000 (01:27 -0500)]
Documentation: update git-clone man page with new behavior
Update git-clone man page to reflect recent changes
(--use-separate-remote default and use of .git/config instead of
remotes files), and rewrite introduction.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Martin Langhoff [Thu, 7 Dec 2006 03:38:50 +0000 (16:38 +1300)]
cvsserver: Avoid miscounting bytes in Perl v5.8.x
At some point between v5.6 and 5.8 Perl started to assume its input,
output and filehandles are UTF-8. This breaks the counting of bytes
for the CVS protocol, resulting in the client expecting less data
than we actually send, and storing truncated files.
Signed-off-by: Martin Langhoff <martin@catalyst.net.nz> Signed-off-by: Junio C Hamano <junkio@cox.net>
Nicolas Pitre [Thu, 7 Dec 2006 04:01:00 +0000 (23:01 -0500)]
change the unpack limit treshold to a saner value
Currently the treshold is 5000. The likelihood of this value to ever be
crossed for a single push is really small making it not really useful.
The optimal treshold for a pure space saving on a filesystem with 4kb
blocks is 3. However this is likely to create many small packs
concentrating a large number of files in a single directory compared to
the same objects which are spread over 256 directories when loose. This
means we would need 512 objects per pack on average to approximagte the
same directory cost (a pack has 2 files because of the index).
But 512 is a really high value just like 5000 since most pushes are
unlikely to have that many objects. So let's try with a value of 100
which should have a good balance between small pushes going to be
exploded into loose objects and large pushes kept as whole packs.
This is not a replacement for periodic repacks of course.
Signed-off-by: Nicolas Pitre <nico@cam.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
J. Bruce Fields [Thu, 7 Dec 2006 04:18:05 +0000 (23:18 -0500)]
Documentation: reorganize cvs-migration.txt
Modify cvs-migration.txt so it explains first how to develop against a
shared repository, then how to set up a shared repository, then how to
import a repository from cvs. Though this seems chronologically
backwards, it's still readable in this order, and it puts the more
commonly needed material closer to the front.
Remove the annotate/pickaxe section; perhaps it can find a place elsewhere
in the future. Remove most of the "why git is better than cvs" stuff from
the introduction.
Add some minor clarifications, including two that have come up several
times on the mailing list:
1. Recommend committing any changes before running pull.
2. Note that changes must be commited before they can be pushed.
Update the clone discussion to reflect the new --use-separate-remotes
default, and add a brief mention of git-cvsserver.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 6 Dec 2006 19:22:55 +0000 (11:22 -0800)]
git-merge: fix "fix confusion between tag and branch" for real
An earlier commit 3683dc5a broke the merge message generation with
a careless use of && where it was not needed, breaking the merge
message for cases where non branches are given.
Eric Wong [Mon, 4 Dec 2006 08:51:16 +0000 (00:51 -0800)]
git-svn: avoid network timeouts for long-running fetches
Long-running fetches run inside children to avoid memory leaks.
When we refork, the connection in the parent can be idle for a
long time; attempting to reuse it in the next child can result
in timeouts.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 4 Dec 2006 22:47:22 +0000 (23:47 +0100)]
gitweb: Allow PNG, GIF, JPEG images to be displayed in "blob" view
Allow images in one of web formats (PNG, GIF, JPEG) - actually files
with mimetype of image/png, image/git, image/jpeg - to be displayed in
"blob" view using <img /> element, instead of using "blob_plain" view
for them, like for all other files except also text/* mimetype files.
This makes possible to easily go to file history, to HEAD version of
the file, to appropriate commit etc; all of those are not available
in "blob_plain" (raw) view.
Only text files can have "blame" view link in the formats part of
navbar.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 6 Dec 2006 18:52:04 +0000 (10:52 -0800)]
git-merge: squelch needless error message.
While deciding if the new style command line argument is a tag
or a branch, we checked it with "git show-ref -s --verify" to
see if results in an error, but when it is not a branch, the
check leaked the error message out, which was not needed to be
shown to the end user.
Junio C Hamano [Tue, 5 Dec 2006 03:44:40 +0000 (19:44 -0800)]
git-reset to remove "$GIT_DIR/MERGE_MSG"
An earlier commit a9cb3c6e changed git-commit to use the
contents of MERGE_MSG even when we do not have MERGE_HEAD (the
rationale is in its log message).
However, the change tricks the following sequence to include a
merge message in a completely unrelated commit:
$ git pull somewhere
: oops, the conflicts are too much. forget it.
$ git reset --hard
: work work work
$ git commit
To fix this confusion, this patch makes "git reset" to remove
the leftover MERGE_MSG that was prepared when the user abandoned
the merge.
Signed-off-by: Junio C Hamano <junkio@cox.net> Acked-by: Luben Tuikov <ltuikov@yahoo.com
Rename the section titles to make the "how-to" content of the section
obvious. Also clarify that changes have to be commited before they can
be pushed.
Jakub Narebski [Sun, 3 Dec 2006 16:24:41 +0000 (17:24 +0100)]
Document git-diff whitespace flags -b and -w
Document git diff options -b / --ignore-space-change and
-w / --ignore-all-space, introduced by Johannes Schindelin
in commit 0d21efa5, "Teach diff about -b and -w flags".
The description of options is taken from GNU diff man page and
GNU Diffutils info documentation.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 4 Dec 2006 10:11:39 +0000 (02:11 -0800)]
unpack-trees: make sure "df_conflict_entry.name" is NUL terminated.
The structure that ends with a flexible array member (or 0
length array with older GCC) "char name[FLEX_ARRAY]" is
allocated on the stack and we use it after clearing its entire
size with memset. That does not guarantee that "name" is
properly NUL terminated as we intended on platforms with more
forgiving structure alignment requirements.
git-fetch: ignore dereferenced tags in expand_refs_wildcard
There was a little bug in the brace expansion which should remove
the ^{} from the tagname. It used ${name#'^{}'} instead of $(name%'^{}'},
the difference is that '#' will remove the given pattern only from the
beginning of a string and '%' only from the end of a string.
Signed-off-by: Michael Loeffler <zvpunry@zvpunry.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Mon, 4 Dec 2006 13:29:09 +0000 (14:29 +0100)]
git-clone: Rename --use-immingled-remote option to --no-separate-remote
With making --use-separate-remote default when creating non-bare
clone, there was need for the flag which would turn off this behavior.
It was called --use-immingled-remote.
Immingle means to blend, to combine into one, to intermingle, but it
is a bit obscure word. I think it would be better to use simply
--no-separate-remote as the opposite to --use-separate-remote
option to git clone.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
David Miller [Mon, 4 Dec 2006 07:17:00 +0000 (23:17 -0800)]
Pass -M to diff in request-pull
Linus recommended this, otherwise any renames cause the
diffstat output to be ridiculous in some circumstances.
Because the corresponding "git-pull" done when the requestee
actually makes pull shows the stat with rename detection
enabled, it makes sense to match what the request message
includes to that output, to make the result easier to verify.
Signed-off-by: David S. Miller <davem@davemloft.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
git-mv: search more precisely for source directory in index
A move of a directory should find the entries in the index by
searching for the name _including_ the slash. Otherwise, the
directory can be shadowed by a file when it matches the prefix
and is lexicographically smaller, e.g. "ab.c" shadows "ab/".
Noticed by Sergey Vlasov.
[jc: added Sergey's original reproduction recipe as a test case
at the end of t7001.]
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Sun, 3 Dec 2006 00:19:31 +0000 (16:19 -0800)]
git-svn: avoid fetching files twice in the same revision
SVN is not entirely consistent in returning log information and
sometimes returns file information when adding subdirectories,
and sometimes it does not (only returning information about the
directory that was added). This caused git-svn to occasionally
add a file to the list of files to be fetched twice. Now we
change the data structure to be hash to avoid repeated fetches.
As of now (in master), this only affects repositories fetched
without deltas enabled (file://, and when manually overriden
with GIT_SVN_DELTA_FETCH=0); so this bug mainly affects users of
1.4.4.1 and maint.
Thanks to Florian Weimer for reporting this bug.
[jc: backported for maint]
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Thu, 30 Nov 2006 10:50:28 +0000 (10:50 +0000)]
De-emphasise the symbolic link documentation.
The fact that git has previously used symbolic links for representing
symbolic refs doesn't seem relevant to the current function of
git-symbolic-ref. This patch makes less of a big deal about the
symbolic link history and instead focuses on what git does now.
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andreas Ericsson [Thu, 30 Nov 2006 11:43:13 +0000 (12:43 +0100)]
git-diff: Introduce --index and deprecate --cached.
'git diff --cached' still works, but its use is discouraged
in the documentation. 'git diff --index' does the same thing
and is consistent with how 'git apply --index' works.
Signed-off-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andreas Ericsson [Thu, 30 Nov 2006 11:28:28 +0000 (12:28 +0100)]
ls-files: Give hints when errors happen.
Without this patch "git commit file.c file2.c" produces the not
so stellar output:
error: pathspec 'file.c' did not match any.
error: pathspec 'file2.c' did not match any.
With this patch, the output is changed to:
error: pathspec 'file.c' did not match any file(s) known to git.
error: pathspec 'file2.c' did not match any file(s) known to git.
Did you forget to 'git add'?
Signed-off-by: Andreas Ericsson <ae@op5.se> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Wed, 29 Nov 2006 20:16:55 +0000 (12:16 -0800)]
Merge branch 'maint'
* branch 'maint':
Document git-repo-config --bool/--int options.
tutorial: talk about user.name early and don't start with commit -a
git-blame: fix rev parameter handling.
Junio C Hamano [Wed, 29 Nov 2006 08:17:01 +0000 (00:17 -0800)]
tutorial: talk about user.name early and don't start with commit -a
Introducing yourself to git early would be a good idea; otherwise
the user may not find the mistake until much later when "git log"
is learned.
Teaching "commit -a" without saying that it is a shortcut for
listing the paths to commit leaves the user puzzled. Teach the
form with explicit paths first.
Alex Riesen [Wed, 15 Nov 2006 21:52:25 +0000 (22:52 +0100)]
git-blame: fix rev parameter handling.
We lacked "--" termination in the underlying init_revisions() call
which made it impossible to specify a revision that happens to
have the same name as an existing file.
Junio C Hamano [Wed, 29 Nov 2006 07:07:20 +0000 (23:07 -0800)]
Merge branch 'jc/globfetch'
* jc/globfetch:
fetch-pack: do not barf when duplicate re patterns are given
git-fetch: allow forcing glob pattern in refspec
git-fetch: allow glob pattern in refspec
git-fetch: fix dumb protocol transport to fetch from pack-pruned ref
git-fetch: reuse ls-remote result.
Junio C Hamano [Wed, 29 Nov 2006 06:29:18 +0000 (22:29 -0800)]
git blame -C: fix output format tweaks when crossing file boundary.
We used to get the case that more than two paths came from the
same commit wrong when computing the output width and deciding
to turn on --show-name option automatically. When we find that
lines that came from a path that is different from what we
started digging from, we should always turn --show-name on, and
we should count the name length for all files involved.
Eric Wong [Wed, 29 Nov 2006 02:51:42 +0000 (18:51 -0800)]
git-svn: fix multi-init
After the bugfix to connect to repositories where the user has
limited read permissions, multi-init was broken due to our
SVN::Ra connection being limited to working in a subdirectory;
so we now create a new Ra connection for init-ing branches
and another for tags
Along with that fix, allow the user to use the command-line
option flags for multi-init (--revision being the most notable;
but also --no-auth-cache, --config-dir, --username (for passing
to SVN), and --shared/--template for passing to git-init-db
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Wed, 29 Nov 2006 02:51:40 +0000 (18:51 -0800)]
git-svn: color support for the log command
* match LESS environment settings to those in pager.c
* parse diff.color and pager.color settings in the
config file, and pass --color to git-log
* --color and --pager= settings are supported
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Tue, 28 Nov 2006 17:12:26 +0000 (12:12 -0500)]
Fix broken bash completion of local refs.
Commit 35e65ecc broke completion of local refs, e.g. "git pull . fo<tab>"
no longer would complete to "foo". Instead it printed out an internal
git error ("fatal: Not a git repository: '.'").
The break occurred when I tried to improve performance by switching from
git-peek-remote to git-for-each-ref. Apparently git-peek-remote will
drop into directory "$1/.git" (where $1 is its first parameter) if it
is given a repository with a working directory. This allowed the bash
completion code to work properly even though it was not handing over
the true repository directory.
So now we do a stat in bash to see if we need to add "/.git" to the
path string before running any command with --git-dir.
I also tried to optimize away two "git rev-parse --git-dir" invocations
in common cases like "git log fo<tab>" as typically the user is in the
top level directory of their project and therefore the .git subdirectory
is in the current working directory. This should make a difference on
systems where fork+exec might take a little while.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 10:50:17 +0000 (02:50 -0800)]
git-svn: fix output reporting from the delta fetcher
There was nothing printed in the code originally because I left
out a pair of parentheses. Nevertheless, the affected code has
been replaced with a more efficient version that respects the -q
flag as well as requiring less bandwidth.
We save some bandwidth by not requesting changed paths
information when calling get_log() since we're using the delta
fetcher.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 22:06:05 +0000 (14:06 -0800)]
git-svn: error out when the SVN connection fails during a fetch
finish_report does seem to return a useful value indicating success
or failure, so we'll just set a flag when close_edit is called
(it is not called on failures, nor is abort_edit) and check
the flag before proceeding.
Thanks to Pazu for pointing this out.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Don't force the user to specify more than one revision parameter,
thus making git-shortlog behave more like git-log.
'git-shortlog master' will now produce the expected results; the
other end of the range simply is the (oldest) root commit.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 28 Nov 2006 05:44:48 +0000 (21:44 -0800)]
git-svn: enable delta transfers during fetches when using SVN:: libs
This should drastically reduce bandwidth used for network
transfers. This is not enabled for file:// repositories by
default because of the increased CPU usage and I/O needed.
GIT_SVN_DELTA_FETCH may be set to a true value to enable or
false (0) to disable delta transfers regardless of the
repository type.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Andy Parkins [Sun, 26 Nov 2006 12:10:52 +0000 (12:10 +0000)]
Use .git/config for storing "origin" shortcut repository
Rather than use a separate config .git/remotes/ for remote shortcuts, this
patch adds the analagous definitions to .git/config using git-repo-config
calls.
For example what was previously .git/remotes/origin
URL: proto://host/path
Pull: refs/heads/master:refs/heads/origin
Is now added to .git/config as
[remote "origin"]
url = proto://host/path
fetch = refs/heads/master:refs/heads/origin
Signed-off-by: Andy Parkins <andyparkins@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
sha1_object_info(): be consistent with read_sha1_file()
We used to try loose objects first with sha1_object_info(), but packed
objects first with read_sha1_file(). Now, prefer packed objects over loose
ones with sha1_object_info(), too.
Usually the old behaviour would pose no problem, but when you tried to fix
a fscked up repository by inserting a known-good pack,
git cat-file $(git cat-file -t <sha1>) <sha1>
could fail, even when
git cat-file blob <sha1>
would _not_ fail. Worse, a repack would fail, too.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 22:21:30 +0000 (14:21 -0800)]
cvsimport: style fixup.
This should not change any functionality, but just makes it readable by
having a space between syntactic construct keyword and open parenthesis
(e.g. "if (expr", not "if(expr") and between close parenthesis and open
brace (e.g. "if (expr) {" not "if (expr){").
Shawn O. Pearce [Mon, 27 Nov 2006 20:11:52 +0000 (15:11 -0500)]
Cache the list of merge strategies and available commands during load.
Since the user's git installation is not likely to grow a new command
or merge strategy in the lifespan of the current shell process we can
save time during completion operations by caching these lists during
sourcing of the completion support.
If the git executable is not available or we run into errors while
caching at load time then we defer these to runtime and generate
the list on the fly. This might happen if the user doesn't put git
into their PATH until after the completion script gets sourced.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 20:10:42 +0000 (15:10 -0500)]
Support --strategy=x completion in addition to --strategy x.
Because git-merge and git-rebase both accept -s, --strategy or --strategy=
we should recognize all three formats in the bash completion functions and
issue back all merge strategies on demand.
I also moved the prior word testing to be before the current word testing,
as the current word cannot be completed with -- if the prior word was an
option which requires a parameter, such as -s or --strategy.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 09:44:47 +0000 (04:44 -0500)]
Teach bash about git-repo-config.
This is a really ugly completion script for git-repo-config, but it has
some nice properties. I've added all of the documented configuration
parameters from Documentation/config.txt to the script, allowing the
user to complete any standard configuration parameter name.
We also have some intelligence for the remote.*.* and branch.*.* keys
by completing not only the key name (e.g. remote.origin) but also the
values (e.g. remote.*.fetch completes to the branches available on the
corresponding remote).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:32 +0000 (03:42 -0500)]
Support bash completion of refs/remote.
Now that people are really likely to start using separate remotes
(due to the default in git-clone changing) we should support ref
completion for these refs in as many commands as possible.
While we are working on this routine we should use for-each-ref
to obtain a list of local refs, as this should run faster than
peek-remote as it does not need to dereference tag objects in
order to produce the list of refs back to us. It should also
be more friendly to users of StGIT as we won't generate a list
of the StGIT metadata refs.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:18 +0000 (03:42 -0500)]
Teach bash about git log/show/whatchanged options.
Typing out options to git log/show/whatchanged can take a while, but
we can easily complete them with bash. So list the most common ones,
especially --pretty=online|short|medium|... so that users don't need
to type everything out.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:42:07 +0000 (03:42 -0500)]
Teach bash how to complete git-rebase.
As git-rebase is a popular command bash should know how to complete
reference names and its long options. We only support completions
which make sense given the current state of the repository, that
way users don't get shown --continue/--skip/--abort on the first
execution.
Also added support for long option --strategy to git-merge, as I
missed that option earlier and just noticed it while implementing
git-rebase.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:43 +0000 (03:41 -0500)]
Teach bash how to complete git-format-patch.
Provide completion for currently known long options supported by
git-format-patch as well as the revision list specification argument,
which is generally either a refname or in the form a..b.
Since _git_log was the only code that knew how to complete a..b, but
we want to start adding option support to _git_log also refactor the
a..b completion logic out into its own function.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:28 +0000 (03:41 -0500)]
Add current branch in PS1 support to git-completion.bash.
Many users want to display the current branch name of the current git
repository as part of their PS1 prompt, much as their PS1 prompt might
also display the current working directory name.
We don't force our own PS1 onto the user. Instead we let them craft
their own PS1 string and offer them the function __git_ps1 which they
can invoke to obtain either "" (when not in a git repository) or
"(%s)" where %s is the name of the current branch, as read from HEAD,
with the leading refs/heads/ removed.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:41:01 +0000 (03:41 -0500)]
Hide plumbing/transport commands from bash completion.
Users generally are not going to need to invoke plumbing-level commands
from within one line shell commands. If they are invoking these commands
then it is likely that they are glueing them together into a shell script
to perform an action, in which case bash completion for these commands is
of relatively little use.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Shawn O. Pearce [Mon, 27 Nov 2006 08:40:47 +0000 (03:40 -0500)]
Teach git-completion.bash how to complete git-merge.
Now that git-merge is high-level Porcelain users are going to expect
to be able to use it from the command line, in which case we really
should also be able to complete ref names as parameters.
I'm also including completion support for the merge strategies
that are supported by git-merge.sh, should the user wish to use a
different strategy than their default.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Sean [Mon, 27 Nov 2006 19:37:43 +0000 (14:37 -0500)]
Update documentation to remove incorrect GIT_DIFF_OPTS example.
Git no longer calls an external diff program to generate patches.
Remove the documentation which suggests that you can pass
arbitrary diff options via the GIT_DIFF_OPTS environment variable.
Signed-off-by: Sean Estabrooks <seanlkml@sympatico.ca> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 27 Nov 2006 06:51:38 +0000 (22:51 -0800)]
Merge branch 'js/shortlog'
* js/shortlog:
git-shortlog: make common repository prefix configurable with .mailmap
git-shortlog: fix common repository prefix abbreviation.
builtin git-shortlog is broken
shortlog: fix "-n"
shortlog: handle email addresses case-insensitively
shortlog: read mailmap from ./.mailmap again
shortlog: do not crash on parsing "[PATCH"
Build in shortlog
Junio C Hamano [Mon, 27 Nov 2006 06:19:56 +0000 (22:19 -0800)]
Merge branch 'jc/merge'
* branch 'jc/merge':
git-merge: do not leak rev-parse output used for checking internally.
git-merge: tighten error checking.
merge: allow merging into a yet-to-be-born branch.
git-merge: make it usable as the first class UI
remove merge-recursive-old
Junio C Hamano [Mon, 27 Nov 2006 06:16:31 +0000 (22:16 -0800)]
git-merge: tighten error checking.
If a branch name to be merged is misspelled, the command leaked error
messages from underlying plumbing commands, which were helpful only
to people who know how the command are implemented to diagnose the
breakage, but simply puzzling and unhelpful for the end users.
Junio C Hamano [Sun, 26 Nov 2006 06:54:45 +0000 (22:54 -0800)]
Merge branch 'jn/web'
* jn/web:
gitweb: Make project description in projects list link to summary view
gitweb: Use author_epoch for pubdate in gitweb feeds
gitweb: Add author and contributor email to Atom feed
gitweb: Add author and committer email extraction to parse_commit
gitweb: Use git-show-ref instead of git-peek-remote
gitweb: Do not use esc_html in esc_path
Attempt to clarify somewhat the difference between pull and merge,
and give a little more details on the pull syntax.
I'm still not happy with this section: the explanation of the origin
branch isn't great, but maybe that should be left alone pending the
use-separate-remotes change; and we need to explain how to set up a
public repository and push to it.
Signed-off-by: J. Bruce Fields <bfields@citi.umich.edu> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sun, 26 Nov 2006 01:18:26 +0000 (02:18 +0100)]
gitweb: Make project description in projects list link to summary view
Make (shortened) project description in the "projects list" view
hyperlink to the "summary" view of the project. Project names are
sometimes short; having project description be hyperling gives larger
are to click. While at it, display full description on mouseover via
'title' attribute to introduced link.
Additionally, fix whitespace usage in modified git_project_list_body
subroutine: tabs are for indent, spaces are for align.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Jakub Narebski [Sat, 25 Nov 2006 10:32:08 +0000 (11:32 +0100)]
gitweb: Use git-show-ref instead of git-peek-remote
Use "git show-ref --dereference" instead of "git peek-remote
$projectroot/project" in git_get_references. git-show-ref is faster
than git-peek-remote (40ms vs 56ms user+sys for git.git repository);
even faster is reading info/refs file (if it exists), but the
information in info/refs can be stale; that and the fact that
info/refs is meant for dumb protocol transports, not for gitweb.
git-show-ref is available since v1.4.4; the output format is slightly
different than git-peek-remote output format, but we accept both.
Signed-off-by: Jakub Narebski <jnareb@gmail.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 25 Nov 2006 09:10:10 +0000 (01:10 -0800)]
git-fetch: allow forcing glob pattern in refspec
Building on top of the earlier refspec glob pattern enhancement,
this allows a glob pattern to say the updates should be forced
by prefixing it with '+' as usual, like this:
projects / git / log