Tom Lane [Fri, 17 Feb 2017 21:58:26 +0000 (16:58 -0500)]
Back-patch 9.4-era compiler warning fixes into older branches.
This applies portions of commits b64b5ccb6 and b1aebbb6a to the older
branches, in hopes of getting -Werror builds to succeed there. The
applied changes simply remove useless tests, eg checking an unsigned
variable to see if it is >= 0. Recent versions of clang warn about
such tests by default.
Tom Lane [Wed, 15 Feb 2017 21:40:06 +0000 (16:40 -0500)]
Make sure that hash join's bulk-tuple-transfer loops are interruptible.
The loops in ExecHashJoinNewBatch(), ExecHashIncreaseNumBatches(), and
ExecHashRemoveNextSkewBucket() are all capable of iterating over many
tuples without ever doing a CHECK_FOR_INTERRUPTS, so that the backend
might fail to respond to SIGINT or SIGTERM for an unreasonably long time.
Fix that. In the case of ExecHashJoinNewBatch(), it seems useful to put
the added CHECK_FOR_INTERRUPTS into ExecHashJoinGetSavedTuple() rather
than directly in the loop, because that will also ensure that both
principal code paths through ExecHashJoinOuterGetTuple() will do a
CHECK_FOR_INTERRUPTS, which seems like a good idea to avoid surprises.
Noah Misch [Sun, 12 Feb 2017 21:03:41 +0000 (16:03 -0500)]
Ignore tablespace ACLs when ignoring schema ACLs.
The ALTER TABLE ALTER TYPE implementation can issue DROP INDEX and
CREATE INDEX to refit existing indexes for the new column type. Since
this CREATE INDEX is an implementation detail of an index alteration,
the ensuing DefineIndex() should skip ACL checks specific to index
creation. It already skips the namespace ACL check. Make it skip the
tablespace ACL check, too. Back-patch to 9.2 (all supported versions).
Tom Lane [Tue, 7 Feb 2017 15:24:25 +0000 (10:24 -0500)]
Correct thinko in last-minute release note item.
The CREATE INDEX CONCURRENTLY bug can only be triggered by row updates,
not inserts, since the problem would arise from an update incorrectly
being made HOT. Noted by Alvaro.
Stephen Frost [Tue, 7 Feb 2017 15:17:02 +0000 (10:17 -0500)]
Initialize number_of_jobs in NewRestoreOptions
Now that we're checking that the number_of_jobs passed in isn't zero or
negative, we need to actually initialize number_of_jobs to '1' when it
isn't set.
Pointed out by Rushabh Lathia, though not his patch.
Tom Lane [Mon, 6 Feb 2017 18:19:51 +0000 (13:19 -0500)]
Avoid returning stale attribute bitmaps in RelationGetIndexAttrBitmap().
The problem with the original coding here is that we might receive (and
clear) a relcache invalidation signal for the target relation down inside
one of the index_open calls we're doing. Since the target is open, we
would not drop the relcache entry, just reset its rd_indexvalid and
rd_indexlist fields. But RelationGetIndexAttrBitmap() kept going, and
would eventually cache and return potentially-obsolete attribute bitmaps.
The case where this matters is where the inval signal was from a CREATE
INDEX CONCURRENTLY telling us about a new index on a formerly-unindexed
column. (In all other cases, the lock we hold on the target rel should
prevent any concurrent change in index state.) Even just returning the
stale attribute bitmap is not such a problem, because it shouldn't matter
during the transaction in which we receive the signal. What hurts is
caching the stale data, because it can survive into later transactions,
breaking CREATE INDEX CONCURRENTLY's expectation that later transactions
will not create new broken HOT chains. The upshot is that there's a window
for building corrupted indexes during CREATE INDEX CONCURRENTLY.
This patch fixes the problem by rechecking that the set of index OIDs
is still the same at the end of RelationGetIndexAttrBitmap() as it was
at the start. If not, we loop back and try again. That's a little
more than is strictly necessary to fix the bug --- in principle, we
could return the stale data but not cache it --- but it seems like a
bad idea on general principles for relcache to return data it knows
is stale.
There might be more hazards of the same ilk, or there might be a better
way to fix this one, but this patch definitely improves matters and seems
unlikely to make anything worse. So let's push it into today's releases
even as we continue to study the problem.
Tom Lane [Mon, 30 Jan 2017 16:40:22 +0000 (11:40 -0500)]
Update time zone data files to tzdata release 2016j.
DST law changes in northern Cyprus (new zone Asia/Famagusta), Russia (new
zone Europe/Saratov), Tonga, Antarctica/Casey. Historical corrections for
Asia/Aqtau, Asia/Atyrau, Asia/Gaza, Asia/Hebron, Italy, Malta. Replace
invented zone abbreviation "TOT" for Tonga with numeric UTC offset; but
as in the past, we'll keep accepting "TOT" for input.
Andres Freund [Fri, 27 Jan 2017 00:47:04 +0000 (16:47 -0800)]
Add castNode(type, ptr) for safe casting between NodeTag based types.
The new function allows to cast from one NodeTag based type to
another, while asserting that the conversion is valid. This replaces
the common pattern of doing a cast and a Assert(IsA(ptr, type))
close-by.
As this seems likely to be used pervasively, we decided to backpatch
this change the addition of this macro. Otherwise backpatched fixes
are more likely not to work on back-branches.
On branches before 9.6, where we do not yet rely on inline functions
being available, the type assertion is only performed if PG_USE_INLINE
support is detected. The cast obviously is performed regardless.
For the benefit of verifying the macro compiles in the back-branches,
this commit contains a single use of the new macro. On master, a
somewhat larger conversion will be committed separately.
Author: Peter Eisentraut and Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/c5d387d9-3440-f5e0-f9d4-71d53b9fbe52@2ndquadrant.com
Backpatch: 9.2-
Tom Lane [Thu, 26 Jan 2017 17:17:47 +0000 (12:17 -0500)]
Ensure that a tsquery like '!foo' matches empty tsvectors.
!foo means "the tsvector does not contain foo", and therefore it should
match an empty tsvector. ts_match_vq() overenthusiastically supposed
that an empty tsvector could never match any query, so it forcibly
returned FALSE, the wrong answer. Remove the premature optimization.
Our behavior on this point was inconsistent, because while seqscans and
GIST index searches both failed to match empty tsvectors, GIN index
searches would find them, since GIN scans don't rely on ts_match_vq().
That makes this certainly a bug, not a debatable definition disagreement,
so back-patch to all supported branches.
Report and diagnosis by Tom Dunstan (bug #14515); added test cases by me.
Fujii Masao [Tue, 24 Jan 2017 22:02:25 +0000 (07:02 +0900)]
Fix bug in verifying TLI (timeline ID) in WAL page header during recovery..
Previously ValidXLOGHeader() could not handle properly the case where
we re-read the WAL segment after reading its subsequent segment having
larger TLI. This case can happen, for example, when the WAL record is split
across two segments having different TLI. In this case, since the segment
we're re-reading has the smaller TLI than its subsequent segment we've
already read, ValidXLOGHeader() reported an error "out-of-sequence TLI"
even though TLI sequence was valid (i.e., TLI doesn't go backwards across
successive WAL pages and segments).
This issue was fixed by commit 7fcbf6a405ffc12a4546a25b98592ee6733783fc
in 9.3 or later though there is no mention to the bug fix in its commit log.
It changed the WAL check code so that it verifies TLI for pages that are
later than the last remembered LSN. This patch applies the same change to
9.2 where the issue still existed.
Tatsuo Ishii [Tue, 24 Jan 2017 01:42:27 +0000 (10:42 +0900)]
Revert "Fix comments in StrategyNotifyBgWriter()."
This reverts commit 0b7bcf7ad2f1061664e6b517a3b4feabee0af00a, which
tried to fix the comments to reflect the change of API of the function
but actually the change had been made only for 9.5 or later.
Robert Haas [Fri, 20 Jan 2017 20:55:45 +0000 (15:55 -0500)]
Avoid useless respawining the autovacuum launcher at high speed.
When (1) autovacuum = off and (2) there's at least one database with
an XID age greater than autovacuum_freeze_max_age and (3) all tables
in that database that need vacuuming are already being processed by a
worker and (4) the autovacuum launcher is started, a kind of infinite
loop occurs. The launcher starts a worker and immediately exits. The
worker, finding no worker to do, immediately starts the launcher,
supposedly so that the next database can be processed. But because
datfrozenxid for that database hasn't been advanced yet, the new
worker gets put right back into the same database as the old one,
where it once again starts the launcher and exits. High-speed ping
pong ensues.
There are several possible ways to break the cycle; this seems like
the safest one.
Amit Khandekar (code) and Robert Haas (comments), reviewed by
Álvaro Herrera.
Tom Lane [Wed, 18 Jan 2017 21:33:18 +0000 (16:33 -0500)]
Reset the proper GUC in create_index test.
Thinko in commit a4523c5aa. It doesn't really affect anything at
present, but it would be a problem if any tests added later in this
file ought to get index-only-scan plans. Back-patch, like the previous
commit, just to avoid surprises in case we add such a test and then
back-patch it.
Alvaro Herrera [Wed, 18 Jan 2017 21:06:13 +0000 (18:06 -0300)]
Change some test macros to return true booleans
These macros work fine when they are used directly in an "if" test or
similar, but as soon as the return values are assigned to boolean
variables (or passed as boolean arguments to some function), they become
bugs, hopefully caught by compiler warnings. To avoid future problems,
fix the definitions so that they return actual booleans.
To further minimize the risk that somebody uses them in back-patched
fixes that only work correctly in branches starting from the current
master and not in old ones, back-patch the change to supported branches
as appropriate.
Fujii Masao [Tue, 17 Jan 2017 08:32:45 +0000 (17:32 +0900)]
Fix an assertion failure related to an exclusive backup.
Previously multiple sessions could execute pg_start_backup() and
pg_stop_backup() to start and stop an exclusive backup at the same time.
This could trigger the assertion failure of
"FailedAssertion("!(XLogCtl->Insert.exclusiveBackup)".
This happend because, even while pg_start_backup() was starting
an exclusive backup, other session could run pg_stop_backup()
concurrently and mark the backup as not-in-progress unconditionally.
This patch introduces ExclusiveBackupState indicating the state of
an exclusive backup. This state is used to ensure that there is only
one session running pg_start_backup() or pg_stop_backup() at
the same time, to avoid the assertion failure.
Back-patch to all supported versions.
Author: Michael Paquier Reviewed-By: Kyotaro Horiguchi and me Reported-By: Andreas Seltenreich
Discussion: <87mvktojme.fsf@credativ.de>
Tom Lane [Sat, 14 Jan 2017 18:27:47 +0000 (13:27 -0500)]
Throw suitable error for COPY TO STDOUT/FROM STDIN in a SQL function.
A client copy can't work inside a function because the FE/BE wire protocol
doesn't support nesting of a COPY operation within query results. (Maybe
it could, but the protocol spec doesn't suggest that clients should support
this, and libpq for one certainly doesn't.)
In most PLs, this prohibition is enforced by spi.c, but SQL functions don't
use SPI. A comparison of _SPI_execute_plan() and init_execution_state()
shows that rejecting client COPY is the only discrepancy in what they
allow, so there's no other similar bugs.
This is an astonishingly ancient oversight, so back-patch to all supported
branches.
Stephen Frost [Wed, 11 Jan 2017 20:46:16 +0000 (15:46 -0500)]
pg_restore: Don't allow non-positive number of jobs
pg_restore will currently accept invalid values for the number of
parallel jobs to run (eg: -1), unlike pg_dump which does check that the
value provided is reasonable.
Worse, '-1' is actually a valid, independent, parameter (as an alias for
--single-transaction), leading to potentially completely unexpected
results from a command line such as:
-> pg_restore -j -1
Where a user would get neither parallel jobs nor a single-transaction.
Add in validity checking of the parallel jobs option, as we already have
in pg_dump, before we try to open up the archive. Also move the check
that we haven't been asked to run more parallel jobs than possible on
Windows to the same place, so we do all the option validity checking
before opening the archive.
Back-patch all the way, though for 9.2 we're adding the Windows-specific
check against MAXIMUM_WAIT_OBJECTS as that check wasn't back-patched
originally.
Tom Lane [Thu, 5 Jan 2017 16:33:51 +0000 (11:33 -0500)]
Fix handling of empty arrays in array_fill().
array_fill(..., array[0]) produced an empty array, which is probably
what users expect, but it was a one-dimensional zero-length array
which is not our standard representation of empty arrays. Also, for
no very good reason, it rejected empty input arrays; that case should
be allowed and produce an empty output array.
In passing, remove the restriction that the input array(s) have lower
bound 1. That seems rather pointless, and it would have needed extra
complexity to make the check deal with empty input arrays.
Per bug #14487 from Andrew Gierth. It's been broken all along, so
back-patch to all supported branches.
Tom Lane [Wed, 4 Jan 2017 23:00:12 +0000 (18:00 -0500)]
Handle OID column inheritance correctly in ALTER TABLE ... INHERIT.
Inheritance operations must treat the OID column, if any, much like
regular user columns. But MergeAttributesIntoExisting() neglected to
do that, leading to weird results after a table with OIDs is associated
to a parent with OIDs via ALTER TABLE ... INHERIT.
Report and patch by Amit Langote, reviewed by Ashutosh Bapat, some
adjustments by me. It's been broken all along, so back-patch to
all supported branches.
Remove bogus notice that older clients might not work with MD5 passwords.
That was written when we still had "crypt" authentication, and it was
referring to the fact that an older client might support "crypt"
authentication but not "md5". But we haven't supported "crypt" for years.
(As soon as we add a new authentication mechanism that doesn't work with
MD5 hashes, we'll need a similar notice again. But this text as it's worded
now is just wrong.)
Joe Conway [Mon, 2 Jan 2017 22:12:38 +0000 (14:12 -0800)]
ilence compiler warnings
In GetCachedPlan(), initialize 'plan' to silence a compiler warning, but
also add an Assert() to make sure we don't ever actually fall through
with 'plan' still being set to NULL, since we are about to dereference
it.
Back-patch back to 9.2.
Author: Stephen Frost
Discussion: https://postgr.es/m/20161129152102.GR13284%40tamriel.snowman.net
Tom Lane [Tue, 27 Dec 2016 20:43:55 +0000 (15:43 -0500)]
Fix interval_transform so it doesn't throw away non-no-op casts.
interval_transform() contained two separate bugs that caused it to
sometimes mistakenly decide that a cast from interval to restricted
interval is a no-op and throw it away.
First, it was wrong to rely on dt.h's field type macros to have an
ordering consistent with the field's significance; in one case they do
not. This led to mistakenly treating YEAR as less significant than MONTH,
so that a cast from INTERVAL MONTH to INTERVAL YEAR was incorrectly
discarded.
Second, fls(1<<k) produces k+1 not k, so comparing its output directly
to SECOND was wrong. This led to supposing that a cast to INTERVAL
MINUTE was really a cast to INTERVAL SECOND and so could be discarded.
To fix, get rid of the use of fls(), and make a function based on
intervaltypmodout to produce a field ID code adapted to the need here.
Per bug #14479 from Piotr Stefaniak. Back-patch to 9.2 where transform
functions were introduced, because this code was born broken.
Andrew Dunstan [Tue, 27 Dec 2016 16:23:46 +0000 (11:23 -0500)]
Explain unaccounted for space in pgstattuple.
In addition to space accounted for by tuple_len, dead_tuple_len and
free_space, the table_len includes page overhead, the item pointers
table and padding bytes.
Tom Lane [Mon, 26 Dec 2016 19:58:02 +0000 (14:58 -0500)]
Remove triggerable Assert in hashname().
hashname() asserted that the key string it is given is shorter than
NAMEDATALEN. That should surely always be true if the input is in fact a
regular value of type "name". However, for reasons of coding convenience,
we allow plain old C strings to be treated as "name" values in many places.
Some SQL functions accept arbitrary "text" inputs, convert them to C
strings, and pass them otherwise-untransformed to syscache lookups for name
columns, allowing an overlength input value to trigger hashname's Assert.
This would be a DOS problem, except that it only happens in assert-enabled
builds which aren't recommended for production. In a production build,
you'll just get a name lookup error, since regardless of the hash value
computed by hashname, the later equality comparison checks can't match.
Likewise, if the catalog lookup is done by seqscan or indexscan searches,
there will just be a lookup error, since the name comparison functions
don't contain any similar length checks, and will see an overlength input
as unequal to any stored entry.
After discussion we concluded that we should simply remove this Assert.
It's inessential to hashname's own functionality, and having such an
assertion in only some paths for name lookup is more of a foot-gun than
a useful check. There may or may not be a case for the affected callers
to do something other than let the name lookup fail, but we'll consider
that separately; in any case we probably don't want to change such
behavior in the back branches.
Per report from Tushar Ahuja. Back-patch to all supported branches.
Stephen Frost [Sat, 24 Dec 2016 06:42:16 +0000 (01:42 -0500)]
pg_dumpall: Include --verbose option in --help output
The -v/--verbose option was not included in the output from --help for
pg_dumpall even though it's in the pg_dumpall documentation and has
apparently been around since pg_dumpall was reimplemented in C in 2002.
Stephen Frost [Sat, 24 Dec 2016 02:01:51 +0000 (21:01 -0500)]
Fix tab completion in psql for ALTER DEFAULT PRIVILEGES
When providing tab completion for ALTER DEFAULT PRIVILEGES, we are
including the list of roles as possible options for completion after the
GRANT or REVOKE. Further, we accept FOR ROLE/IN SCHEMA at the same time
and in either order, but the tab completion was only working for one or
the other. Lastly, we weren't using the actual list of allowed kinds of
objects for default privileges for completion after the 'GRANT X ON' but
instead were completeing to what 'GRANT X ON' supports, which isn't the
ssame at all.
Address these issues by improving the forward tab-completion for ALTER
DEFAULT PRIVILEGES and then constrain and correct how the tail
completion is done when it is for ALTER DEFAULT PRIVILEGES.
Back-patch the forward/tail tab-completion to 9.6, where we made it easy
to handle such cases.
For 9.5 and earlier, correct the initial tab-completion to at least be
correct as far as it goes and then add a check for GRANT/REVOKE to only
tab-complete when the GRANT/REVOKE is the start of the command, so we
don't try to do tab-completion after we get to the GRANT/REVOKE part of
the ALTER DEFAULT PRIVILEGES command, which is better than providing
incorrect completions.
Initial patch for master and 9.6 by Gilles Darold, though I cleaned it
up and added a few comments. All bugs in the 9.5 and earlier patch are
mine.
Robert Haas [Thu, 22 Dec 2016 18:54:40 +0000 (13:54 -0500)]
Fix broken error check in _hash_doinsert.
You can't just cast a HashMetaPage to a Page, because the meta page
data is stored after the page header, not at offset 0. Fortunately,
this didn't break anything because it happens to find hashm_bsize
at the offset at which it expects to find pd_pagesize_version, and
the values are close enough to the same that this works out.
Still, it's a bug, so back-patch to all supported versions.
Joe Conway [Thu, 22 Dec 2016 17:46:46 +0000 (09:46 -0800)]
Make dblink try harder to form useful error messages
When libpq encounters a connection-level error, e.g. runs out of memory
while forming a result, there will be no error associated with PGresult,
but a message will be placed into PGconn's error buffer. postgres_fdw
takes care to use the PGconn error message when PGresult does not have
one, but dblink has been negligent in that regard. Modify dblink to mirror
what postgres_fdw has been doing.
Back-patch to all supported branches.
Author: Joe Conway Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/02fa2d90-2efd-00bc-fefc-c23c00eb671e%40joeconway.com
Joe Conway [Wed, 21 Dec 2016 23:48:50 +0000 (15:48 -0800)]
Improve dblink error message when remote does not provide it
When dblink or postgres_fdw detects an error on the remote side of the
connection, it will try to construct a local error message as best it
can using libpq's PQresultErrorField(). When no primary message is
available, it was bailing out with an unhelpful "unknown error". Make
that message better and more style guide compliant. Per discussion
on hackers.
Backpatch to 9.2 except postgres_fdw which didn't exist before 9.3.
Tom Lane [Wed, 21 Dec 2016 22:39:33 +0000 (17:39 -0500)]
Fix detection of unfinished Unicode surrogate pair at end of string.
The U&'...' and U&"..." syntaxes silently discarded a surrogate pair
start (that is, a code between U+D800 and U+DBFF) if it occurred at
the very end of the string. This seems like an obvious oversight,
since we throw an error for every other invalid combination of surrogate
characters, including the very same situation in E'...' syntax.
This has been wrong since the pair processing was added (in 9.0),
so back-patch to all supported branches.
Stephen Frost [Wed, 21 Dec 2016 18:47:32 +0000 (13:47 -0500)]
Fix dumping of casts and transforms using built-in functions
In pg_dump.c dumpCast() and dumpTransform(), we would happily ignore the
cast or transform if it happened to use a built-in function because we
weren't including the information about built-in functions when querying
pg_proc from getFuncs().
Modify the query in getFuncs() to also gather information about
functions which are used by user-defined casts and transforms (where
"user-defined" means "has an OID >= FirstNormalObjectId"). This also
adds to the TAP regression tests for 9.6 and master to cover these
types of objects.
Back-patch all the way for casts, back to 9.5 for transforms.
Stephen Frost [Wed, 21 Dec 2016 18:47:32 +0000 (13:47 -0500)]
For 8.0 servers, get last built-in oid from pg_database
We didn't start ensuring that all built-in objects had OIDs less than
16384 until 8.1, so for 8.0 servers we still need to query the value out
of pg_database. We need this, in particular, to distinguish which casts
were built-in and which were user-defined.
For HEAD, we only worry about going back to 8.0, for the back-branches,
we also ensure that 7.0-7.4 work.
Fix off-by-one in memory allocation for quote_literal_cstr().
The calculation didn't take into account the NULL terminator. That lead
to overwriting the palloc'd buffer by one byte, if the input consists
entirely of backslashes. For example "format('%L', E'\\')".
Fixes bug #14468. Backpatch to all supported versions.
Tom Lane [Thu, 15 Dec 2016 19:32:42 +0000 (14:32 -0500)]
Sync our copy of the timezone library with IANA release tzcode2016j.
This is a trivial update (consisting in fact only in the addition of
a comment). The point is just to get back to being synced with an
official release of tzcode, rather than some ad-hoc point in their
commit history, which is where commit 1f87181e1 left it.
When there is both a serialization failure and a unique violation,
throw the former rather than the latter. When initially pushed,
this was viewed as a feature to assist application framework
developers, so that they could more accurately determine when to
retry a failed transaction, but a test case presented by Ian
Jackson has shown that this patch can prevent serialization
anomalies in some cases where a unique violation is caught within a
subtransaction, the work of that subtransaction is discarded, and
no error is thrown. That makes this a bug fix, so it is being
back-patched to all supported branches where it is not already
present (i.e., 9.2 to 9.5).
Tom Lane [Sun, 11 Dec 2016 23:04:28 +0000 (18:04 -0500)]
Use "%option prefix" to set API names in ecpg's lexer.
Back-patch commit 92fb64983 into the pre-9.6 branches.
Without this, ecpg fails to build with the latest version of flex.
It's not unreasonable that people would want to compile our old branches
with recent tools. Per report from Дилян Палаузов.
Tom Lane [Sun, 11 Dec 2016 22:44:17 +0000 (17:44 -0500)]
Build backend/parser/scan.l and interfaces/ecpg/preproc/pgc.l standalone.
Back-patch commit 72b1e3a21 into the pre-9.6 branches.
As noted in the original commit, this has some extra benefits: we can
narrow the scope of the -Wno-error flag that's forced on scan.c. Also,
since these grammar and lexer files are so large, splitting them into
separate build targets should have some advantages in build speed,
particularly in parallel or ccache'd builds.
However, the real reason for doing this now is that it avoids symbol-
redefinition warnings (or worse) with the latest version of flex.
It's not unreasonable that people would want to compile our old branches
with recent tools. Per report from Дилян Палаузов.
Tom Lane [Sun, 11 Dec 2016 18:09:57 +0000 (13:09 -0500)]
Prevent crash when ts_rewrite() replaces a non-top-level subtree with null.
When ts_rewrite()'s replacement argument is an empty tsquery, it's supposed
to simplify any operator nodes whose operand(s) become NULL; but it failed
to do that reliably, because dropvoidsubtree() only examined the top level
of the result tree. Rather than make a second recursive pass, let's just
give the responsibility to dofindsubquery() to simplify while it's doing
the main replacement pass. Per report from Andreas Seltenreich.
Artur Zakirov, with some cosmetic changes by me. Back-patch to all
supported branches.
Tom Lane [Fri, 9 Dec 2016 20:27:23 +0000 (15:27 -0500)]
Be more careful about Python refcounts while creating exception objects.
PLy_generate_spi_exceptions neglected to do Py_INCREF on the new exception
objects, evidently supposing that PyModule_AddObject would do that --- but
it doesn't. This left us in a situation where a Python garbage collection
cycle could result in deletion of exception object(s), causing server
crashes or wrong answers if the exception objects are used later in the
session.
In addition, PLy_generate_spi_exceptions didn't bother to test for
a null result from PyErr_NewException, which at best is inconsistent
with the code in PLy_add_exceptions. And PLy_add_exceptions, while it
did do Py_INCREF on the exceptions it makes, waited to do that till
after some PyModule_AddObject calls, creating a similar risk for
failure if garbage collection happened within those calls.
To fix, refactor to have just one piece of code that creates an
exception object and adds it to the spiexceptions module, bumping the
refcount first.
Also, let's add an additional refcount to represent the pointer we're
going to store in a C global variable or hash table. This should only
matter if the user does something weird like delete the spiexceptions
Python module, but lack of paranoia has caused us enough problems in
PL/Python already.
The fact that PyModule_AddObject doesn't do a Py_INCREF of its own
explains the need for the Py_INCREF added in commit 4c966d920, so we
can improve the comment about that; also, this means we really want
to do that before not after the PyModule_AddObject call.
The missing Py_INCREF in PLy_generate_spi_exceptions was reported and
diagnosed by Rafa de la Torre; the other fixes by me. Back-patch
to all supported branches.
Tom Lane [Fri, 9 Dec 2016 17:01:14 +0000 (12:01 -0500)]
Fix reporting of column typmods for multi-row VALUES constructs.
expandRTE() and get_rte_attribute_type() reported the exprType() and
exprTypmod() values of the expressions in the first row of the VALUES as
being the column type/typmod returned by the VALUES RTE. That's fine for
the data type, since we coerce all expressions in a column to have the same
common type. But we don't coerce them to have a common typmod, so it was
possible for rows after the first one to return values that violate the
claimed column typmod. This leads to the incorrect result seen in bug
#14448 from Hassan Mahmood, as well as some other corner-case misbehaviors.
The desired behavior is the same as we use in other type-unification
cases: report the common typmod if there is one, but otherwise return -1
indicating no particular constraint.
We fixed this in HEAD by deriving the typmods during transformValuesClause
and storing them in the RTE, but that's not a feasible solution in the back
branches. Instead, just use a brute-force approach of determining the
correct common typmod during expandRTE() and get_rte_attribute_type().
Simple testing says that that doesn't really cost much, at least not in
common cases where expandRTE() is only used once per query. It turns out
that get_rte_attribute_type() is typically never used at all on VALUES
RTEs, so the inefficiency there is of no great concern.
Robert Haas [Thu, 8 Dec 2016 19:09:09 +0000 (14:09 -0500)]
Log the creation of an init fork unconditionally.
Previously, it was thought that this only needed to be done for the
benefit of possible standbys, so wal_level = minimal skipped it.
But that's not safe, because during crash recovery we might replay
XLOG_DBASE_CREATE or XLOG_TBLSPC_CREATE record which recursively
removes the directory that contains the new init fork. So log it
always.
The user-visible effect of this bug is that if you create a database
or tablespace, then create an unlogged table, then crash without
checkpointing, then restart, accessing the table will fail, because
the it won't have been properly reset. This commit fixes that.
Michael Paquier, per a report from Konstantin Knizhnik. Wording of
the comments per a suggestion from me.
Tom Lane [Wed, 7 Dec 2016 17:39:24 +0000 (12:39 -0500)]
Restore psql's SIGPIPE setting if popen() fails.
Ancient oversight in PageOutput(): if popen() fails, we'd better reset
the SIGPIPE handler before returning stdout, because ClosePager() won't.
Noticed while fixing the empty-PAGER issue.
Tom Lane [Wed, 7 Dec 2016 17:19:57 +0000 (12:19 -0500)]
Handle empty or all-blank PAGER setting more sanely in psql.
If the PAGER environment variable is set but contains an empty string,
psql would pass it to "sh" which would silently exit, causing whatever
query output we were printing to vanish entirely. This is quite
mystifying; it took a long time for us to figure out that this was the
cause of Joseph Brenner's trouble report. Rather than allowing that
to happen, we should treat this as another way to specify "no pager".
(We could alternatively treat it as selecting the default pager, but
it seems more likely that the former is what the user meant to achieve
by setting PAGER this way.)
Nonempty, but all-white-space, PAGER values have the same behavior, and
it's pretty easy to test for that, so let's handle that case the same way.
Most other cases of faulty PAGER values will result in the shell printing
some kind of complaint to stderr, which should be enough to diagnose the
problem, so we don't need to work harder than this. (Note that there's
been an intentional decision not to be very chatty about apparent failure
returns from the pager process, since that may happen if, eg, the user
quits the pager with control-C or some such. I'd just as soon not start
splitting hairs about which exit codes might merit making our own report.)
libpq's old PQprint() function was already on board with ignoring empty
PAGER values, but for consistency, make it ignore all-white-space values
as well.
It's been like this a long time, so back-patch to all supported branches.
Noah Misch [Sat, 3 Dec 2016 20:46:36 +0000 (15:46 -0500)]
Make pgwin32_putenv() visit debug CRTs.
This has no effect in the most conventional case, where no relevant DLL
uses a debug build. For an example where it does matter, given a debug
build of MIT Kerberos, the krb_server_keyfile parameter usually had no
effect. Since nobody wants a Heisenbug, back-patch to 9.2 (all
supported versions).
Noah Misch [Sat, 3 Dec 2016 20:46:35 +0000 (15:46 -0500)]
Remove wrong CloseHandle() call.
In accordance with its own documentation, invoke CloseHandle() only when
directed in the documentation for the function that furnished the
handle. GetModuleHandle() does not so direct. We have been issuing
this call only in the rare event that a CRT DLL contains no "_putenv"
symbol, so lack of bug reports is uninformative. Back-patch to 9.2 (all
supported versions).
Noah Misch [Sat, 3 Dec 2016 20:46:35 +0000 (15:46 -0500)]
Refine win32env.c cosmetics.
Replace use of plain 0 as a null pointer constant. In comments, update
terminology and lessen redundancy. Back-patch to 9.2 (all supported
versions) for the convenience of back-patching the next two commits.
Christian Ullrich and Noah Misch, reviewed (in earlier versions) by
Michael Paquier.
Tom Lane [Wed, 30 Nov 2016 18:34:14 +0000 (13:34 -0500)]
Doc: improve description of trim() and related functions.
Per bug #14441 from Mark Pether, the documentation could be misread,
mainly because some of the examples failed to show what happens with
a multicharacter "characters to trim" string. Also, while the text
description in most of these entries was fairly clear that the
"characters" argument is a set of characters not a substring to match,
some of them used variant wording that was a bit less clear.
trim() itself suffered from both deficiencies and was thus pretty
misinterpretable.
Also fix failure to explain which of LEADING/TRAILING/BOTH is the
default.
Stephen Frost [Tue, 29 Nov 2016 15:35:16 +0000 (10:35 -0500)]
Clarify pg_dump -b documentation
The documentation around the -b/--blobs option to pg_dump seemed to
imply that it might be possible to add blobs to a "schema-only" dump or
similar. Clarify that blobs are data and therefore will only be
included in dumps where data is being included, even when -b is used to
request blobs be included.
The -b option has been around since before 9.2, so back-patch to all
supported branches.
Tom Lane [Sat, 26 Nov 2016 18:31:35 +0000 (13:31 -0500)]
Fix test about ignoring extension dependencies during extension scripts.
Commit 08dd23cec introduced an exception to the rule that extension member
objects can only be dropped as part of dropping the whole extension,
intending to allow such drops while running the extension's own creation or
update scripts. However, the exception was only applied at the outermost
recursion level, because it was modeled on a pre-existing check to ignore
dependencies on objects listed in pendingObjects. Bug #14434 from Philippe
Beaudoin shows that this is inadequate: in some cases we can reach an
extension member object by recursion from another one. (The bug concerns
the serial-sequence case; I'm not sure if there are other cases, but there
might well be.)
To fix, revert 08dd23cec's changes to findDependentObjects() and instead
apply the creating_extension exception regardless of stack level.
Having seen this example, I'm a bit suspicious that the pendingObjects
logic is also wrong and such cases should likewise be allowed at any
recursion level. However, changing that would interact in subtle ways
with the recursion logic (at least it would need to be moved to after the
recursing-from check). Given that the code's been like that a long time,
I'll refrain from touching it without a clear example showing it's wrong.
Back-patch to all active branches. In HEAD and 9.6, where suitable
test infrastructure exists, add a regression test case based on the
bug report.
Tom Lane [Fri, 25 Nov 2016 18:44:48 +0000 (13:44 -0500)]
Check for pending trigger events on far end when dropping an FK constraint.
When dropping a foreign key constraint with ALTER TABLE DROP CONSTRAINT,
we refuse the drop if there are any pending trigger events on the named
table; this ensures that we won't remove the pg_trigger row that will be
consulted by those events. But we should make the same check for the
referenced relation, else we might remove a due-to-be-referenced pg_trigger
row for that relation too, resulting in "could not find trigger NNN" or
"relation NNN has no triggers" errors at commit. Per bug #14431 from
Benjie Gillam. Back-patch to all supported branches.
Tom Lane [Wed, 23 Nov 2016 18:45:56 +0000 (13:45 -0500)]
Make sure ALTER TABLE preserves index tablespaces.
When rebuilding an existing index, ALTER TABLE correctly kept the
physical file in the same tablespace, but it messed up the pg_class
entry if the index had been in the database's default tablespace
and "default_tablespace" was set to some non-default tablespace.
This led to an inaccessible index.
Fix by fixing pg_get_indexdef_string() to always include a tablespace
clause, whether or not the index is in the default tablespace. The
previous behavior was installed in commit 537e92e41, and I think it just
wasn't thought through very clearly; certainly the possible effect of
default_tablespace wasn't considered. There's some risk in changing the
behavior of this function, but there are no other call sites in the core
code. Even if it's being used by some third party extension, it's fairly
hard to envision a usage that is okay with a tablespace clause being
appended some of the time but can't handle it being appended all the time.
Back-patch to all supported versions.
Code fix by me, investigation and test cases by Michael Paquier.
Tom Lane [Tue, 22 Nov 2016 22:56:16 +0000 (17:56 -0500)]
Doc: improve documentation about composite-value usage.
Create a section specifically for the syntactic rules around whole-row
variable usage, such as expansion of "foo.*". This was previously
documented only haphazardly, with some critical info buried in
unexpected places like xfunc-sql-composite-functions. Per repeated
questions in different mailing lists.
Tom Lane [Tue, 22 Nov 2016 19:02:52 +0000 (14:02 -0500)]
Doc: add a section in Part II concerning RETURNING.
There are assorted references to RETURNING in Part II, but nothing
that would qualify as an explanation of the feature, which seems
like an oversight considering how useful it is. Add something.
Noted while looking for a place to point a cross-reference to ...
Tom Lane [Mon, 21 Nov 2016 23:21:56 +0000 (18:21 -0500)]
Fix PGLC_localeconv() to handle errors better.
The code was intentionally not very careful about leaking strdup'd
strings in case of an error. That was forgivable probably, but it
also failed to notice strdup() failures, which could lead to subsequent
null-pointer-dereference crashes, since many callers unsurprisingly
didn't check for null pointers in the struct lconv fields. An even
worse problem is that it could throw error while we were setlocale'd
to a non-C locale, causing unwanted behavior in subsequent libc calls.
Rewrite to ensure that we cannot throw elog(ERROR) until after we've
restored the previous locale settings, or at least attempted to.
(I'm sorely tempted to make restore failure be a FATAL error, but
will refrain for the moment.) Having done that, it's not much more
work to ensure that we clean up strdup'd storage on the way out, too.
This code is substantially the same in all supported branches, so
back-patch all the way.
Tom Lane [Tue, 15 Nov 2016 21:17:19 +0000 (16:17 -0500)]
Allow DOS-style line endings in ~/.pgpass files.
On Windows, libc will mask \r\n line endings for us, since we read the
password file in text mode. But that doesn't happen on Unix. People
who share password files across both systems might have \r\n line endings
in a file they use on Unix, so as a convenience, ignore trailing \r.
Per gripe from Josh Berkus.
In passing, put the existing check for empty line somewhere where it's
actually useful, ie after stripping the newline not before.
Tom Lane [Sun, 6 Nov 2016 19:43:14 +0000 (14:43 -0500)]
Rationalize and document pltcl's handling of magic ".tupno" array element.
For a very long time, pltcl's spi_exec and spi_execp commands have had
a behavior of storing the current row number as an element of output
arrays, but this was never documented. Fix that.
For an equally long time, pltcl_trigger_handler had a behavior of silently
ignoring ".tupno" as an output column name, evidently so that the result
of spi_exec could be used directly as a trigger result tuple. Not sure
how useful that really is, but in any case it's bad that it would break
attempts to use ".tupno" as an actual column name. We can fix it by not
checking for ".tupno" until after we check for a column name match. This
comports with the effective behavior of spi_exec[p] that ".tupno" is only
magic when you don't have an actual column named that.
In passing, wordsmith the description of returning modified tuples from
a pltcl trigger.
Noted while working on Jim Nasby's patch to support composite results
from pltcl. The inability to return trigger tuples using ".tupno" as
a column name is a bug, so back-patch to all supported branches.
Tom Lane [Sun, 6 Nov 2016 15:45:58 +0000 (10:45 -0500)]
More zic cleanup.
The workaround the IANA guys chose to get rid of the clang warning
we'd silenced in commit 23ed2ba81 turns out not to satisfy Coverity.
Go back to the previous solution, ie, remove the useless comparison
to SIZE_MAX. (In principle, there could be machines out there where
it's not useless because ptrdiff_t is wider than size_t. But the whole
thing is pretty academic anyway, as we could never approach this limit
for any sane estimate of the amount of data that zic will ever be asked
to work with.)
Also, s/lineno/lineno_t/g, because if we accept their decision to start
using "lineno" as a typedef, it is going to have very unpleasant
consequences in our next pgindent run. Noted that while fooling with
pltcl yesterday.
Tom Lane [Fri, 4 Nov 2016 14:44:16 +0000 (10:44 -0400)]
Sync our copy of the timezone library with IANA tzcode master.
This patch absorbs some unreleased fixes for symlink manipulation bugs
introduced in tzcode 2016g. Ordinarily I'd wait around for a released
version, but in this case it seems like we could do with extra testing,
in particular checking whether it works in EDB's VMware build environment.
This corresponds to commit aec59156abbf8472ba201b6c7ca2592f9c10e077 in
https://github.com/eggert/tz.
Per a report from Sandeep Thakkar, building in an environment where hard
links are not supported in the timezone data installation directory failed,
because upstream code refactoring had broken the case of symlinking from an
existing symlink. Further experimentation also showed that the symlinks
were sometimes made incorrectly, with too many or too few "../"'s in the
symlink contents.
Tom Lane [Sun, 30 Oct 2016 21:35:43 +0000 (17:35 -0400)]
Fix nasty performance problem in tsquery_rewrite().
tsquery_rewrite() tries to find matches to subsets of AND/OR conditions;
for example, in the query 'a | b | c' the substitution subquery 'a | c'
should match and lead to replacement of the first and third items.
That's fine, but the matching algorithm apparently takes about O(2^N)
for an N-clause query (I say "apparently" because the code is also both
unintelligible and uncommented). We could probably do better than that
even without any extra assumptions --- but actually, we know that the
subclauses are sorted, indeed are depending on that elsewhere in this very
same function. So we can just scan the two lists a single time to detect
matches, as though we were doing a merge join.
Also do a re-flattening call (QTNTernary()) in tsquery_rewrite_query, just
to make sure that the tree fits the expectations of the next search cycle.
I didn't try to devise a test case for this, but I'm pretty sure that the
oversight could have led to failure to match in some cases where a match
would be expected.
Improve comments, and also stick a CHECK_FOR_INTERRUPTS into
dofindsubquery, just in case it's still too slow for somebody.
Per report from Andreas Seltenreich. Back-patch to all supported branches.
Tom Lane [Sun, 30 Oct 2016 19:24:40 +0000 (15:24 -0400)]
Fix bogus tree-flattening logic in QTNTernary().
QTNTernary() contains logic to flatten, eg, '(a & b) & c' into 'a & b & c',
which is all well and good, but it tries to do that to NOT nodes as well,
so that '!!a' gets changed to '!a'. Explicitly restrict the conversion to
be done only on AND and OR nodes, and add a test case illustrating the bug.
In passing, provide some comments for the sadly naked functions in
tsquery_util.c, and simplify some baroque logic in QTNFree(), which
I think may have been leaking some items it intended to free.
Noted while investigating a complaint from Andreas Seltenreich.
Back-patch to all supported versions.
Robert Haas [Thu, 27 Oct 2016 15:19:51 +0000 (11:19 -0400)]
Fix possible pg_basebackup failure on standby with "include WAL".
If a restartpoint flushed no dirty buffers, it could fail to update
the minimum recovery point, leading to a minimum recovery point prior
to the starting REDO location. perform_base_backup() would interpret
that as meaning that no WAL files at all needed to be included in the
backup, failing an internal sanity check. To fix, have restartpoints
always update the minimum recovery point to just after the checkpoint
record itself, so that the file (or files) containing the checkpoint
record will always be included in the backup.
Code by Amit Kapila, per a design suggestion by me, with some
additional work on the code comment by me. Test case by Michael
Paquier. Report by Kyotaro Horiguchi.
Tom Lane [Wed, 26 Oct 2016 17:40:41 +0000 (13:40 -0400)]
Fix not-HAVE_SYMLINK code in zic.c.
I broke this in commit f3094920a. Apparently it's dead code anyway,
at least as far as our buildfarm is concerned (and the upstream IANA
code doesn't worry at all about symlink() not being present).
But as long as the rest of our code is willing to guard against not
having symlink(), this should too. Noted while investigating a
tangentially-related complaint from Sandeep Thakkar.
Tom Lane [Sun, 23 Oct 2016 19:01:24 +0000 (15:01 -0400)]
Avoid testing tuple visibility without buffer lock in RI_FKey_check().
Despite the argumentation I wrote in commit 7a2fe85b0, it's unsafe to do
this, because in corner cases it's possible for HeapTupleSatisfiesSelf
to try to set hint bits on the target tuple; and at least since 8.2 we
have required the buffer content lock to be held while setting hint bits.
The added regression test exercises one such corner case. Unpatched, it
causes an assertion failure in assert-enabled builds, or otherwise would
cause a hint bit change in a buffer we don't hold lock on, which given
the right race condition could result in checksum failures or other data
consistency problems. The odds of a problem in the field are probably
pretty small, but nonetheless back-patch to all supported branches.
Tom Lane [Fri, 21 Oct 2016 15:01:35 +0000 (11:01 -0400)]
Doc: wording tweak for PERL, PYTHON, TCLSH configuration variables.
Replace "Full path to ..." with "Full path name of ...". At least one
user has misinterpreted the existing wording as meaning "Directory
containing ...".
Tom Lane [Thu, 20 Oct 2016 21:17:50 +0000 (17:17 -0400)]
Fix EXPLAIN so that it doesn't emit invalid XML in corner cases.
With track_io_timing = on, EXPLAIN (ANALYZE, BUFFERS) will emit fields
named like "I/O Read Time". The slash makes that invalid as an XML
element name, so that adding FORMAT XML would produce invalid XML.
We already have code in there to translate spaces to dashes, so let's
generalize that to convert anything that isn't a valid XML name character,
viz letters, digits, hyphens, underscores, and periods. We could just
reject slashes, which would run a bit faster. But the fact that this went
unnoticed for so long doesn't give me a warm feeling that we'd notice the
next creative violation, so let's make it a permanent fix.
Reported by Markus Winand, though this isn't his initial patch proposal.
Back-patch to 9.2 where track_io_timing was added. The problem is only
latent in 9.1, so I don't feel a need to fix it there.
Tom Lane [Thu, 20 Oct 2016 19:40:07 +0000 (15:40 -0400)]
Sync our copy of the timezone library with IANA release tzcode2016h.
This absorbs a fix for a symlink-manipulation bug in zic that was
introduced in 2016g. It probably isn't interesting for our use-case,
but I'm not quite sure, so let's update while we're at it.
Tom Lane [Wed, 19 Oct 2016 22:55:52 +0000 (18:55 -0400)]
Sync our copy of the timezone library with IANA release tzcode2016g.
This is mostly to absorb some corner-case fixes in zic for year-2037
timestamps. The other changes that have been made are unlikely to affect
our usage, but nonetheless we may as well take 'em.
Tom Lane [Wed, 19 Oct 2016 22:11:49 +0000 (18:11 -0400)]
Suppress "Factory" zone in pg_timezone_names view for tzdata >= 2016g.
IANA got rid of the really silly "abbreviation" and replaced it with one
that's only moderately silly. But it's still pointless, so keep on not
showing it.
Tom Lane [Wed, 19 Oct 2016 21:56:38 +0000 (17:56 -0400)]
Update time zone data files to tzdata release 2016g.
DST law changes in Turkey. Historical corrections for America/Los_Angeles,
Europe/Kirov, Europe/Moscow, Europe/Samara, and Europe/Ulyanovsk.
Rename Asia/Rangoon to Asia/Yangon, with a backward compatibility link.
The IANA crew continue their campaign to replace invented time zone
abbrevations with numeric GMT offsets. This update changes numerous zones
in Antarctica and the former Soviet Union, for instance Antarctica/Casey
now reports "+08" not "AWST" in the pg_timezone_names view. I kept these
abbreviations in the tznames/ data files, however, so that we will still
accept them for input. (We may want to start trimming those files someday,
but today is not that day.)
An exception is that since IANA no longer claims that "AMT" is in use
in Armenia for GMT+4, I replaced it in the Default file with GMT-4,
corresponding to Amazon Time which is in use in South America. It may be
that that meaning is also invented and IANA will drop it in a future
update; but for now, it seems silly to give pride of place to a meaning
not traceable to IANA over one that is.
Tom Lane [Tue, 18 Oct 2016 16:24:46 +0000 (12:24 -0400)]
Fix cidin() to handle values above 2^31 platform-independently.
CommandId is declared as uint32, and values up to 4G are indeed legal.
cidout() handles them properly by treating the value as unsigned int.
But cidin() was just using atoi(), which has platform-dependent behavior
for values outside the range of signed int, as reported by Bart Lengkeek
in bug #14379. Use strtoul() instead, as xidin() does.
In passing, make some purely cosmetic changes to make xidin/xidout
look more like cidin/cidout; the former didn't have a monopoly on
best practice IMO.
Neither xidin nor cidin make any attempt to throw error for invalid input.
I didn't change that here, and am not sure it's worth worrying about
since neither is really a user-facing type. The point is just to ensure
that indubitably-valid inputs work as expected.
It's been like this for a long time, so back-patch to all supported
branches.
Tom Lane [Fri, 14 Oct 2016 20:28:34 +0000 (16:28 -0400)]
Fix assorted integer-overflow hazards in varbit.c.
bitshiftright() and bitshiftleft() would recursively call each other
infinitely if the user passed INT_MIN for the shift amount, due to integer
overflow in negating the shift amount. To fix, clamp to -VARBITMAXLEN.
That doesn't change the results since any shift distance larger than the
input bit string's length produces an all-zeroes result.
Also fix some places that seemed inadequately paranoid about input typmods
exceeding VARBITMAXLEN. While a typmod accepted by anybit_typmodin() will
certainly be much less than that, at least some of these spots are
reachable with user-chosen integer values.
Tom Lane [Thu, 13 Oct 2016 21:05:15 +0000 (17:05 -0400)]
Fix another bug in merging of inherited CHECK constraints.
It's not good for an inherited child constraint to be marked connoinherit;
that would result in the constraint not propagating to grandchild tables,
if any are created later. The code mostly prevented this from happening
but there was one case that was missed.
This is somewhat related to commit e55a946a8, which also tightened checks
on constraint merging. Hence, back-patch to 9.2 like that one. This isn't
so much because there's a concrete feature-related reason to stop there,
as to avoid having more distinct behaviors than we have to in this area.
Tom Lane [Mon, 10 Oct 2016 14:35:58 +0000 (10:35 -0400)]
In PQsendQueryStart(), avoid leaking any left-over async result.
Ordinarily there would not be an async result sitting around at this
point, but it appears that in corner cases there can be. Considering
all the work we're about to launch, it's hardly going to cost anything
noticeable to check.
It's been like this forever, so back-patch to all supported branches.
Tom Lane [Sat, 8 Oct 2016 23:29:28 +0000 (19:29 -0400)]
Fix two bugs in merging of inherited CHECK constraints.
Historically, we've allowed users to add a CHECK constraint to a child
table and then add an identical CHECK constraint to the parent. This
results in "merging" the two constraints so that the pre-existing
child constraint ends up with both conislocal = true and coninhcount > 0.
However, if you tried to do it in the other order, you got a duplicate
constraint error. This is problematic for pg_dump, which needs to issue
separated ADD CONSTRAINT commands in some cases, but has no good way to
ensure that the constraints will be added in the required order.
And it's more than a bit arbitrary, too. The goal of complaining about
duplicated ADD CONSTRAINT commands can be served if we reject the case of
adding a constraint when the existing one already has conislocal = true;
but if it has conislocal = false, let's just make the ADD CONSTRAINT set
conislocal = true. In this way, either order of adding the constraints
has the same end result.
Another problem was that the code allowed creation of a parent constraint
marked convalidated that is merged with a child constraint that is
!convalidated. In this case, an inheritance scan of the parent table could
emit some rows violating the constraint condition, which would be an
unexpected result given the marking of the parent constraint as validated.
Hence, forbid merging of constraints in this case. (Note: valid child and
not-valid parent seems fine, so continue to allow that.)
Per report from Benedikt Grundmann. Back-patch to 9.2 where we introduced
possibly-not-valid check constraints. The second bug obviously doesn't
apply before that, and I think the first doesn't either, because pg_dump
only gets into this situation when dealing with not-valid constraints.
projects / postgresql / log