Peter Kokot [Thu, 18 Oct 2018 22:02:09 +0000 (00:02 +0200)]
Fix #77035: The phpize and ./configure create redundant .deps file
The `.deps` file(s) was once used by Automake and created to write
dependencies to it. The file creation has been removed via the commit 779c11af21cf8a627b8f2f2edef9e9073c76ed94.
The phpize and ./configure script create a redundant .deps file in a
PECL extension directory which might cause confusions why is it used.
Today it is no longer relevant so this redundant artefact can be
removed in the phpize configure script.
Fix #77027: tidy::getOptDoc() not available on Windows
We define the `HAVE_TIDYOPTGETDOC` macro unconditionally, since the
Windows PHP SDK ships libtidy 2009/04/06 or newer for a long time.
We do not add a regression test, since 021.phpt already tests
`tidy_get_opt_doc`, but has previously been skipped due to
unavailability of the function.
Add support for getting SKIP_TAGSTART and SKIP_WHITE options
When `XML_OPTION_SKIP_TAGSTART` and `XML_OPTION_SKIP_WHITE` had been
introduced[1], it had been overlooked to also support them for
`xml_parser_get_option()`. We catch up on that.
Peter Kokot [Mon, 15 Oct 2018 02:29:24 +0000 (04:29 +0200)]
Sync leading and final newlines in *.phpt sections
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines in all
*.phpt sections.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
Peter Kokot [Sun, 14 Oct 2018 10:51:01 +0000 (12:51 +0200)]
Sync leading and final newlines in source code files
This patch adds missing newlines, trims multiple redundant final
newlines into a single one, and trims redundant leading newlines.
According to POSIX, a line is a sequence of zero or more non-' <newline>'
characters plus a terminating '<newline>' character. [1] Files should
normally have at least one final newline character.
C89 [2] and later standards [3] mention a final newline:
"A source file that is not empty shall end in a new-line character,
which shall not be immediately preceded by a backslash character."
Although it is not mandatory for all files to have a final newline
fixed, a more consistent and homogeneous approach brings less of commit
differences issues and a better development experience in certain text
editors and IDEs.
To see which line endings are in the index and in the working copy the
following command can be used:
`git ls-files --eol`
Git additionally provides `.gitattributes` file to specify if some files
need to have specific line endings on all platforms (either CRLF or LF).
Changed files shouldn't cause issues on modern Windows platforms because
also Git can do output conversion is core.autocrlf=true is set on
Windows and use CRLF newlines in all files in the working tree.
Unless CRLF files are tracked specifically, Git by default tracks all
files in the index using LF newlines.
Fix #30875: xml_parse_into_struct() does not resolve entities
Setting up an empty default handler is not only useless, but actually
harmful, since internal entity-references are not resolved anymore.
From the libexpat docs[1]:
| Setting the handler with this call has the side effect of
| turning off expansion of references to internally defined general
| entities. Instead these references are passed to the default
| handler.
This is related to Zend VM regression bug #75881. The regression was fixed in the VM, so there is no user visible change from the termination correction.
Fix #66828: iconv_mime_encode Q-encoding longer than it should be
Before the fix for bug 48289 has been applied, the algorithm to
construct a Q-encoded-word has been optimistic, i.e. try to encode as
many bytes that *may* fit in the remaining space, calculate the actual
length of the Q-encoded word, and if it's too long, try again with a
reduced size. However, the fix for the mentioned bug replaced this by
a pessimistic algorithm, which always terminates[1] the for loop[2]
during the first iteration (which renders the following 3 lines as dead
code), and as such easily produces unnecessarily short encoded-words.
Instead the proper fix for the bug would have been to make sure that
`out_size` is always decremented, if the space isn't sufficient for the
encoded-word.
Newer MySQL versions are stricter about invalid values. Three issues
are fixed:
* Don't use negative values with ZEROFILL. ZEROFILL implies UNSIGNED.
* Use a legal TIMESTAMP value. TIMESTAMP does not accept a Unix timestamp.
* Specify BIGINT values as strings, to avoid overflows.
Fix intermittent failures in mysqli_stmt_bind_result_format.phpt
There were two distinct issues here:
* $trend was compared against 'NULL' using !=, which does not work
as intended in the case where $trend==0.0.
* current_targets was declared as double(17,0), which means that
the fractional part was rounded, so that the same comparison in
SQL (rounded) and in PHP (not rounded) did not necessarily
match.
Please don't write mt_rand based tests, it takes ages to debug this
crap...
get_method() may modify the object pointer passed to it if method
forwarding is used. In this case we do not want to modify the
passed zval, so make sure that we copy the object into a temporary
first.
Fix #75273: php_zlib_inflate_filter() may not update bytes_consumed
Whenever we return with `PSFS_PASS_ON`, we need to update
`bytes_consumed` to not mislead the caller. Instead of fixing the
respective `if` clauses, we eschew the early bail-outs to simplify the
code a bit.
Fix #75696: posix_getgrnam fails to print details of group
According to the POSIX specification of `getgrnam_r()` the result of
`sysconf(_SC_GETGR_R_SIZE_MAX)` is an initial value suggested for the
size of the buffer, and `ERANGE` signals that insufficient storage was
supplied. So if we get `ERANGE`, we try again with a buffer twice as
big, and so on, instead of failing.
Anatol Belski [Mon, 6 Aug 2018 20:35:11 +0000 (22:35 +0200)]
Fix stack underflow in phar
The checks can issue reads below and above the temporary buffer. A read
itself doesn't seem dangerous, but the condition result can be
arbitrary. Such reads have to be avoided. Likely this patch should be
backported.
Fix #68180: iconv_mime_decode can return extra characters in a header
Basically, the algorithm to append a converted string to an existing
`smart_str` works by increasing the `smart_str` buffer, to let `iconv`
convert characters until there is no more space, to set the new length
of the `smart_str` and to repeat until there is no more input.
Formerly, the new length calculation has been wrong, though, since we
would have to take the old `out_len` into account (`buf_growth -
old_out_len - out_len`). However, since there is no need to take the
old `out_len` into account when increasing the `smart_str` buffer, we
can simplify the fix, avoiding an additional variable.
Fix #60494: iconv_mime_decode does ignore special characters
We must not ignore erroneous characters in mime headers, but rather let
iconv_mime_decode() fail in this case, issuing the usual notice
regarding illegal characters.
Fix #63839: iconv_mime_decode_headers function is skipping headers
We have to cater to the possibility that `=?` is not the start of an
encoded-word, but rather a literal `=?`. If a line break is found
while we're still looking for the charset, we can safely assume that
it's a literal `=?`, and act accordingly.
Fix #55146: iconv_mime_decode_headers() skips some headers
If we're expecting the start of an encoded word (`=?`), but instead of
the question mark get a line break (CR or LF), we must not append it to
the `pretval`.
There's no need to actually try to trigger an out-of-memory condition
to proof the leak; instead we can simply rely on the Zend MM to report
the memory leaks in debug mode (at least on Linux). Therefore we
simplify the regression test, which also makes it run much faster.
projects / php / log