Michael Paquier [Fri, 1 Feb 2019 01:35:16 +0000 (10:35 +0900)]
Fix use of dangling pointer in heap_delete() when logging replica identity
When logging the replica identity of a deleted tuple, XLOG_HEAP_DELETE
records include references of the old tuple. Its data is stored in an
intermediate variable used to register this information for the WAL
record, but this variable gets away from the stack when the record gets
actually inserted.
Michael Paquier [Thu, 31 Jan 2019 04:06:51 +0000 (13:06 +0900)]
Add --min-xid-age and --min-mxid-age options to vacuumdb
These two new options can be used to improve the selectivity of
relations to vacuum or analyze even further depending on the age of
respectively their transaction ID or multixact ID, so as it is possible
to prioritize tables to prevent wraparound of one or the other.
Combined with --table, it is possible to target a subset of tables to
choose as potential processing targets.
Author: Nathan Bossart Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/FFE5373C-E26A-495B-B5C8-911EC4A41C5E@amazon.com
Tom Lane [Thu, 31 Jan 2019 00:25:33 +0000 (19:25 -0500)]
Allow RECORD and RECORD[] to be specified in function coldeflists.
We can't allow these pseudo-types to be used as table column types,
because storing an anonymous record value in a table would result
in data that couldn't be understood by other sessions. However,
it seems like there's no harm in allowing the case in a column
definition list that's specifying what a function-returning-record
returns. The data involved is all local to the current session,
so we should be just as able to resolve its actual tuple type as
we are for the function-returning-record's top-level tuple output.
Peter Eisentraut [Wed, 30 Jan 2019 22:26:10 +0000 (23:26 +0100)]
Log PostgreSQL version number on startup
Logging the PostgreSQL version on startup is useful for two reasons:
There is a clear marker in the log file that a new postmaster is
beginning, and it's useful for tracking the server version across
startup while upgrading.
Author: Christoph Berg <christoph.berg@credativ.de>
Discussion: https://www.postgresql.org/message-id/flat/20181121144611.GJ15795@msg.credativ.de/
Peter Eisentraut [Wed, 16 Jan 2019 16:32:01 +0000 (17:32 +0100)]
postmaster: Start syslogger earlier
When the syslogger was originally
added (bdf8ef6925de6ea1a9330fa1ce32e1a315d07eb2), nothing was normally
logged before the point where it was started. But since f9dfa5c9776649f769d537dd0923003b35f128de, the creation of sockets
causes messages of level LOG to be written routinely, so those don't
go to the syslogger now.
To improve that, arrange the sequence in PostmasterMain() slightly so
that the syslogger is started early enough to capture those messages.
Discussion: https://www.postgresql.org/message-id/d5d50936-20b9-85f1-06bc-94a01c5040c1%402ndquadrant.com Reviewed-by: Christoph Berg <christoph.berg@credativ.de>
Michael Meskes [Wed, 30 Jan 2019 12:58:25 +0000 (13:58 +0100)]
Change error handling of out of scope variables in ecpg.
The function called can result in an out of memory error that subsequently was
disregarded. Instead it should set the appropriate SQL error variables and be
checked by whatever whenever statement is defined.
Peter Eisentraut [Mon, 28 Jan 2019 21:09:33 +0000 (22:09 +0100)]
Fix a crash in logical replication
The bug was that determining which columns are part of the replica
identity index using RelationGetIndexAttrBitmap() would run
eval_const_expressions() on index expressions and predicates across
all indexes of the table, which in turn might require a snapshot, but
there wasn't one set, so it crashes. There were actually two separate
bugs, one on the publisher and one on the subscriber.
To trigger the bug, a table that is part of a publication or
subscription needs to have an index with a predicate or expression
that lends itself to constant expressions simplification.
The fix is to avoid the constant expressions simplification in
RelationGetIndexAttrBitmap(), so that it becomes safe to call in these
contexts. The constant expressions simplification comes from the
calls to RelationGetIndexExpressions()/RelationGetIndexPredicate() via
BuildIndexInfo(). But RelationGetIndexAttrBitmap() calling
BuildIndexInfo() is overkill. The latter just takes pg_index catalog
information, packs it into the IndexInfo structure, which former then
just unpacks again and throws away. We can just do this directly with
less overhead and skip the troublesome calls to
eval_const_expressions(). This also removes the awkward
cross-dependency between relcache.c and index.c.
Bug: #15114 Reported-by: Петър Славов <pet.slavov@gmail.com> Reviewed-by: Noah Misch <noah@leadboat.com> Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/152110589574.1223.17983600132321618383@wrigleys.postgresql.org/
Michael Paquier [Wed, 30 Jan 2019 00:44:08 +0000 (09:44 +0900)]
Do not filter by relkind in vacuumdb's catalog query if --table is used
If a user specifies a relation name which cannot be processed, then the
backend can warn directly about what is wrong with it. This fixes an
oversight from e0c2933.
Tom Lane [Tue, 29 Jan 2019 21:49:25 +0000 (16:49 -0500)]
Rename nodes/relation.h to nodes/pathnodes.h.
The old name of this file was never a very good indication of what it
was for. Now that there's also access/relation.h, we have a potential
confusion hazard as well, so let's rename it to something more apropos.
Per discussion, "pathnodes.h" is reasonable, since a good fraction of
the file is Path node definitions.
While at it, tweak a couple of other headers that were gratuitously
importing relation.h into modules that don't need it.
Tom Lane [Tue, 29 Jan 2019 20:48:51 +0000 (15:48 -0500)]
Refactor planner's header files.
Create a new header optimizer/optimizer.h, which exposes just the
planner functions that can be used "at arm's length", without need
to access Paths or the other planner-internal data structures defined
in nodes/relation.h. This is intended to provide the whole planner
API seen by most of the rest of the system; although FDWs still need
to use additional stuff, and more thought is also needed about just
what selfuncs.c should rely on.
The main point of doing this now is to limit the amount of new
#include baggage that will be needed by "planner support functions",
which I expect to introduce later, and which will be in relevant
datatype modules rather than anywhere near the planner.
This commit just moves relevant declarations into optimizer.h from
other header files (a couple of which go away because everything
got moved), and adjusts #include lists to match. There's further
cleanup that could be done if we want to decide that some stuff
being exposed by optimizer.h doesn't belong in the planner at all,
but I'll leave that for another day.
Tom Lane [Tue, 29 Jan 2019 20:26:44 +0000 (15:26 -0500)]
Make some small planner API cleanups.
Move a few very simple node-creation and node-type-testing functions
from the planner's clauses.c to nodes/makefuncs and nodes/nodeFuncs.
There's nothing planner-specific about them, as evidenced by the
number of other places that were using them.
While at it, rename and_clause() etc to is_andclause() etc, to clarify
that they are node-type-testing functions not node-creation functions.
And use "static inline" implementations for the shortest ones.
Also, modify flatten_join_alias_vars() and some subsidiary functions
to take a Query not a PlannerInfo to define the join structure that
Vars should be translated according to. They were only using the
"parse" field of the PlannerInfo anyway, so this just requires removing
one level of indirection. The advantage is that now parse_agg.c can
use flatten_join_alias_vars() without the horrid kluge of creating an
incomplete PlannerInfo, which will allow that file to be decoupled from
relation.h in a subsequent patch.
Peter Eisentraut [Tue, 29 Jan 2019 09:29:07 +0000 (10:29 +0100)]
Make SSL tests more robust
Someone running these test could have key or certificate files in
their ~/.postgresql/, which would interfere with the tests. The way
to override that is to specify sslcert=invalid and/or
sslrootcert=invalid if no actual certificate is used for a particular
test. Document that and fix up one test that had a risk of failing in
these circumstances.
Michael Paquier [Tue, 29 Jan 2019 02:22:03 +0000 (11:22 +0900)]
Use catalog query to discover tables to process in vacuumdb
vacuumdb would use a catalog query only when the command caller does not
define a list of tables. Switching to a catalog table represents two
advantages:
- Relation existence check can happen before running any VACUUM or
ANALYZE query. Before this change, if multiple relations are defined
using --table, the utility would fail only after processing the
firstly-defined ones, which may be a long some depending on the size of
the relation. This adds checks for the relation names, and does
nothing, at least yet, for the attribute names.
- More filtering options can become available for the utility user.
These options, which may be introduced later on, are based on the
relation size or the relation age, and need to be made available even if
the user does not list any specific table with --table.
Author: Nathan Bossart Reviewed-by: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/FFE5373C-E26A-495B-B5C8-911EC4A41C5E@amazon.com
Andres Freund [Tue, 29 Jan 2019 02:05:52 +0000 (18:05 -0800)]
Fix LLVM related headers to compile standalone (to fix cpluspluscheck).
Previously llvmjit.h #error'ed when USE_LLVM was not defined, to
prevent it from being included from code not having #ifdef USE_LLVM
guards - but that's not actually that useful after, during the
development of JIT support, LLVM related code was moved into a
separately compiled .so. Having that #error means cpluspluscheck
doesn't work when llvm support isn't enabled, which isn't great.
Similarly add USE_LLVM guards to llvmjit_emit.h, and additionally make
sure it compiles standalone.
Per complaint from Tom Lane.
Author: Andres Freund
Discussion: https://postgr.es/m/19808.1548692361@sss.pgh.pa.us
Backpatch: 11, where JIT support was added
Parts of the buildfarm error out with
ERROR: page %u of relation "%s" should be empty but is not
errors, and so far I/we do not know why. fc02e672 didn't fix the
issue. As I cannot reproduce the issue locally, it seems best to get
the buildfarm green again, and reproduce the issue without time
pressure.
Andres Freund [Mon, 28 Jan 2019 23:41:23 +0000 (15:41 -0800)]
Fix race condition between relation extension and vacuum.
In e6799d5a5301 I removed vacuumlazy.c trickery around re-checking
whether a page is actually empty after acquiring an extension lock on
the relation, because the page is not PageInit()ed anymore, and
entries in the FSM ought not to lead to user-visible errors.
As reported by various buildfarm animals that is not correct, given
the way to code currently stands: If vacuum processes a page that's
just been newly added by either RelationGetBufferForTuple() or
RelationAddExtraBlocks(), it could add that page to the FSM and it
could be reused by other backends, before those two functions check
whether the newly added page is actually new. That's a relatively
narrow race, but several buildfarm machines appear to be able to hit
it.
While it seems wrong that the FSM, given it's lack of durability and
approximative nature, can trigger errors like this, that seems better
fixed in a separate commit. Especially given that a good portion of
the buildfarm is red, and this is just re-introducing logic that
existed a few hours ago.
Author: Andres Freund
Discussion: https://postgr.es/m/20190128222259.zhi7ovzgtkft6em6@alap3.anarazel.de
Tomas Vondra [Mon, 28 Jan 2019 23:00:47 +0000 (00:00 +0100)]
Separate per-batch and per-tuple memory contexts in COPY
In batching mode, COPY was using the same (per-tuple) memory context for
allocations with longer lifetime. This was confusing but harmless, until
commit 31f3817402 added COPY FROM ... WHERE feature, introducing a risk
of memory leak.
The "per-tuple" memory context was reset only when starting new batch,
but as the rows may be filtered out by the WHERE clauses, that may not
happen at all. The WHERE clause however has to be evaluated for all
rows, before filtering them out.
This commit separates the per-tuple and per-batch contexts, removing the
ambiguity. Expressions (both defaults and WHERE clause) are evaluated
in the per-tuple context, while tuples are formed in the batch context.
This allows resetting the contexts at appropriate times.
The main complexity is related to partitioning, in which case we need to
reset the batch context after forming the tuple (which happens before
routing to leaf partition). Instead of switching between two contexts
as before, we simply copy the last tuple aside, reset the context and
then copy the tuple back. The performance impact is negligible, and
juggling with two contexts is not free either.
Tom Lane [Mon, 28 Jan 2019 22:54:10 +0000 (17:54 -0500)]
In the planner, replace an empty FROM clause with a dummy RTE.
The fact that "SELECT expression" has no base relations has long been a
thorn in the side of the planner. It makes it hard to flatten a sub-query
that looks like that, or is a trivial VALUES() item, because the planner
generally uses relid sets to identify sub-relations, and such a sub-query
would have an empty relid set if we flattened it. prepjointree.c contains
some baroque logic that works around this in certain special cases --- but
there is a much better answer. We can replace an empty FROM clause with a
dummy RTE that acts like a table of one row and no columns, and then there
are no such corner cases to worry about. Instead we need some logic to
get rid of useless dummy RTEs, but that's simpler and covers more cases
than what was there before.
For really trivial cases, where the query is just "SELECT expression" and
nothing else, there's a hazard that adding the extra RTE makes for a
noticeable slowdown; even though it's not much processing, there's not
that much for the planner to do overall. However testing says that the
penalty is very small, close to the noise level. In more complex queries,
this is able to find optimizations that we could not find before.
The new RTE type is called RTE_RESULT, since the "scan" plan type it
gives rise to is a Result node (the same plan we produced for a "SELECT
expression" query before). To avoid confusion, rename the old ResultPath
path type to GroupResultPath, reflecting that it's only used in degenerate
grouping cases where we know the query produces just one grouped row.
(It wouldn't work to unify the two cases, because there are different
rules about where the associated quals live during query_planner.)
Note: although this touches readfuncs.c, I don't think a catversion
bump is required, because the added case can't occur in stored rules,
only plans.
Patch by me, reviewed by David Rowley and Mark Dilger
Andres Freund [Mon, 28 Jan 2019 21:51:12 +0000 (13:51 -0800)]
Install JIT related headers.
There's no reason not to install these, and jit.h can be useful for
users of e.g. planner hooks.
Author: Donald Dong Reviewed-By: Andres Freund
Discussion: https://postgr.es/m/296D405F-7F95-49F1-B565-389D6AA78505@csumb.edu
Backpatch: 11-, where JIT compilation was introduced
Andres Freund [Mon, 28 Jan 2019 21:15:11 +0000 (13:15 -0800)]
Move page initialization from RelationAddExtraBlocks() to use.
Previously we initialized pages when bulk extending in
RelationAddExtraBlocks(). That has a major disadvantage: It ties
RelationAddExtraBlocks() to heap, as other types of storage are likely
to need different amounts of special space, have different amount of
free space (previously determined by PageGetHeapFreeSpace()).
That we're relying on initializing pages, but not WAL logging the
initialization, also means the risk for getting
"WARNING: relation \"%s\" page %u is uninitialized --- fixing"
style warnings in vacuums after crashes/immediate shutdowns, is
considerably higher. The warning sounds much more serious than what
they are.
Fix those two issues together by not initializing pages in
RelationAddExtraPages() (but continue to do so in
RelationGetBufferForTuple(), which is linked much more closely to
heap), and accepting uninitialized pages as normal in
vacuumlazy.c. When vacuumlazy encounters an empty page it now adds it
to the FSM, but does nothing else. We chose to not issue a debug
message, much less a warning in that case - it seems rarely useful,
and quite likely to scare people unnecessarily.
For now empty pages aren't added to the VM, because standbys would not
re-discover such pages after a promotion. In contrast to other sources
for empty pages, there's no corresponding WAL records triggering FSM
updates during replay.
Author: Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20181219083945.6khtgm36mivonhva@alap3.anarazel.de
Amit Kapila [Mon, 28 Jan 2019 02:44:06 +0000 (08:14 +0530)]
Avoid creation of the free space map for small heap relations.
Previously, all heaps had FSMs. For very small tables, this means that the
FSM took up more space than the heap did. This is wasteful, so now we
refrain from creating the FSM for heaps with 4 pages or fewer. If the last
known target block has insufficient space, we still try to insert into some
other page before giving up and extending the relation, since doing
otherwise leads to table bloat. Testing showed that trying every page
penalized performance slightly, so we compromise and try every other page.
This way, we visit at most two pages. Any pages with wasted free space
become visible at next relation extension, so we still control table bloat.
As a bonus, directly attempting one or two pages can even be faster than
consulting the FSM would have been.
Once the FSM is created for a heap we don't remove it even if somebody
deletes all the rows from the corresponding relation. We don't think it is
a useful optimization as it is quite likely that relation will again grow
to the same size.
Author: John Naylor with design inputs and some code contribution by Amit Kapila Reviewed-by: Amit Kapila Tested-by: Mithun C Y
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
Amit Kapila [Mon, 28 Jan 2019 02:21:02 +0000 (07:51 +0530)]
In bootstrap mode, don't allow the creation of files if they don't already
exist.
In commit's b9d01fe288 and 3908473c80, we have added some code where we
allowed the creation of files during mdopen even if they didn't exist
during the bootstrap mode. The later commit obviates the need for same.
This was harmless code till now but with an upcoming feature where we don't
allow to create FSM for small tables, this will needlessly create FSM
files.
Author: John Naylor Reviewed-by: Amit Kapila
Discussion: https://www.postgresql.org/message-id/CAJVSVGWvB13PzpbLEecFuGFc5V2fsO736BsdTakPiPAcdMM5tQ@mail.gmail.com
https://www.postgresql.org/message-id/CAA4eK1KsET6sotf+rzOTQfb83pzVEzVhbQi1nxGFYVstVWXUGw@mail.gmail.com
Michael Paquier [Sun, 27 Jan 2019 13:25:48 +0000 (22:25 +0900)]
Add TAP tests for vacuumdb with column lists
vacuumdb generates by itself SQL queries to run ANALYZE or VACUUM on the
backend, but we never actually checked for query patterns with column
lists defined.
Author: Michael Paquier Reviewed-by: Nathan Bossart
Discussion: https://postgr.es/m/FFE5373C-E26A-495B-B5C8-911EC4A41C5E@amazon.com
Tom Lane [Sun, 27 Jan 2019 03:12:48 +0000 (22:12 -0500)]
Allow for yet another crash symptom in 013_crash_restart.pl.
Given the right timing, psql could emit "connection to server was lost"
rather than one of the other messages that this test script checked for.
It looks like commit 4247db625 may have made this more likely, but
I don't really believe it was impossible before then. Rather than
stress about it, just add that spelling as one of the crash-successfully-
detected cases.
Andres Freund [Sat, 26 Jan 2019 22:17:52 +0000 (14:17 -0800)]
Change function call information to be variable length.
Before this change FunctionCallInfoData, the struct arguments etc for
V1 function calls are stored in, always had space for
FUNC_MAX_ARGS/100 arguments, storing datums and their nullness in two
arrays. For nearly every function call 100 arguments is far more than
needed, therefore wasting memory. Arg and argnull being two separate
arrays also guarantees that to access a single argument, two
cachelines have to be touched.
Change the layout so there's a single variable-length array with pairs
of value / isnull. That drastically reduces memory consumption for
most function calls (on x86-64 a two argument function now uses
64bytes, previously 936 bytes), and makes it very likely that argument
value and its nullness are on the same cacheline.
Arguments are stored in a new NullableDatum struct, which, due to
padding, needs more memory per argument than before. But as usually
far fewer arguments are stored, and individual arguments are cheaper
to access, that's still a clear win. It's likely that there's other
places where conversion to NullableDatum arrays would make sense,
e.g. TupleTableSlots, but that's for another commit.
Because the function call information is now variable-length
allocations have to take the number of arguments into account. For
heap allocations that can be done with SizeForFunctionCallInfoData(),
for on-stack allocations there's a new LOCAL_FCINFO(name, nargs) macro
that helps to allocate an appropriately sized and aligned variable.
Some places with stack allocation function call information don't know
the number of arguments at compile time, and currently variably sized
stack allocations aren't allowed in postgres. Therefore allow for
FUNC_MAX_ARGS space in these cases. They're not that common, so for
now that seems acceptable.
Because of the need to allocate FunctionCallInfo of the appropriate
size, older extensions may need to update their code. To avoid subtle
breakages, the FunctionCallInfoData struct has been renamed to
FunctionCallInfoBaseData. Most code only references FunctionCallInfo,
so that shouldn't cause much collateral damage.
This change is also a prerequisite for more efficient expression JIT
compilation (by allocating the function call information on the stack,
allowing LLVM to optimize it away); previously the size of the call
information caused problems inside LLVM's optimizer.
Author: Andres Freund Reviewed-By: Tom Lane
Discussion: https://postgr.es/m/20180605172952.x34m5uz6ju6enaem@alap3.anarazel.de
Tom Lane [Sat, 26 Jan 2019 19:15:42 +0000 (14:15 -0500)]
Fix psql's "\g target" meta-command to work with COPY TO STDOUT.
Previously, \g would successfully execute the COPY command, but
the target specification if any was ignored, so that the data was
always dumped to the regular query output target. This seems like
a clear bug, so let's not just fix it but back-patch it.
While at it, adjust the documentation for \copy to recommend
"COPY ... TO STDOUT \g foo" as a plausible alternative.
Back-patch to 9.5. The problem exists much further back, but the
code associated with \g was refactored enough in 9.5 that we'd
need a significantly different patch for 9.4, and it doesn't
seem worth the trouble.
Tom Lane [Sat, 26 Jan 2019 02:14:31 +0000 (21:14 -0500)]
Allow UNLISTEN in hot-standby mode.
Since LISTEN is (still) disallowed, UNLISTEN must be a no-op in a
hot-standby session, and so there's no harm in allowing it. This
change allows client code to not worry about whether it's connected
to a primary or standby server when performing session-state-reset
type activities. (Note that DISCARD ALL, which includes UNLISTEN,
was already allowed, making it inconsistent to reject UNLISTEN.)
Per discussion, back-patch to all supported versions.
Michael Paquier [Sat, 26 Jan 2019 01:45:23 +0000 (10:45 +0900)]
Simplify restriction handling of two-phase commit for temporary objects
There were two flags used to track the access to temporary tables and
to the temporary namespace of a session which are used to restrict
PREPARE TRANSACTION, however the first control flag is a concept
included in the second. This removes the flag for temporary table
tracking, keeping around only the one at namespace level.
Author: Michael Paquier Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20190118053126.GH1883@paquier.xyz
Tom Lane [Fri, 25 Jan 2019 22:09:45 +0000 (17:09 -0500)]
Split QTW_EXAMINE_RTES flag into QTW_EXAMINE_RTES_BEFORE/_AFTER.
This change allows callers of query_tree_walker() to choose whether
to visit an RTE before or after visiting the contents of the RTE
(i.e., prefix or postfix tree order). All existing users of
QTW_EXAMINE_RTES want the QTW_EXAMINE_RTES_BEFORE behavior, but
an upcoming patch will want QTW_EXAMINE_RTES_AFTER, and it seems
like a potentially useful change on its own.
Andreas Karlsson (extracted from CTE inlining patch)
Tom Lane [Fri, 25 Jan 2019 16:44:26 +0000 (11:44 -0500)]
Teach nulltestsel() that system columns are never NULL.
While it's perhaps unlikely that users would write an explicit test
like "ctid IS NULL", this function is also used in range estimation,
and an incorrect answer can throw off the results for tight ranges.
Anyway it's not much code so we might as well do it.
Use single-byte Boyer-Moore-Horspool search even with multibyte encodings.
The old implementation first converted the input strings to arrays of
wchars, and performed the conversion on those. However, the conversion is
expensive, and for a large input string, consumes a lot of memory.
Allocating the large arrays also meant that these functions could not be
used on strings larger 1 GB / pg_encoding_max_length() (256 MB for UTF-8).
Avoid the conversion, and instead use the single-byte algorithm even with
multibyte encodings. That can get fooled, if there is a matching byte
sequence in the middle of a multi-byte character, so to eliminate false
positives like that, we verify any matches by walking the string character
by character with pg_mblen(). Also, if the caller needs the position of
the match, as a character-offset, we also need to walk the string to count
the characters.
Performance testing shows that walking the whole string with pg_mblen() is
somewhat slower than converting the whole string to wchars. It's still
often a win, though, because we don't need to do it if there is no match,
and even when there is, we only need to walk up to the point where the
match is, not the whole string. Even in the worst case, there would be
room for optimization: Much of the CPU time in the current loop with
pg_mblen() is function call overhead, and could be improved by inlining
pg_mblen() and/or the encoding-specific mblen() functions. But I didn't
attempt to do that as part of this patch.
Most of the callers of text_position_setup/next functions were actually
not interested in the position of the match, counted in characters. To
cater for them, refactor the text_position_next() interface into two
parts: searching for the next match (text_position_next()), and returning
the current match's position as a pointer (text_position_get_match_ptr())
or as a character offset (text_position_get_match_pos()). Getting the
pointer to the match is a more convenient API for many callers, and with
UTF-8, it allows skipping the character-walking step altogether, because
UTF-8 can't have false matches even when treated like raw byte strings.
Reviewed-by: John Naylor
Discussion: https://www.postgresql.org/message-id/3173d989-bc1c-fc8a-3b69-f24246f73876%40iki.fi
Fix comments that claimed that mblen() only looks at first byte.
GB18030's mblen() function looks at the first and the second byte of the
multibyte character, to determine its length. copy.c had made the
assumption that mblen() only looks at the first byte, but it turns out to
work out fine, because of the way the GB18030 encoding works. COPY will
see a 4-byte encoded character as two 2-byte encoded characters, which is
enough for COPY's purposes. It cannot mix those up with delimiter or
escaping characters, because only single-byte ASCII characters are
supported as delimiters or escape characters.
Peter Eisentraut [Fri, 25 Jan 2019 10:27:59 +0000 (11:27 +0100)]
Allow generalized expression syntax for partition bounds
Previously, only literals were allowed. This change allows general
expressions, including functions calls, which are evaluated at the
time the DDL command is executed.
Besides offering some more functionality, it simplifies the parser
structures and removes some inconsistencies in how the literals were
handled.
Author: Kyotaro Horiguchi, Tom Lane, Amit Langote Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/9f88b5e0-6da2-5227-20d0-0d7012beaa1c@lab.ntt.co.jp/
Tom Lane [Thu, 24 Jan 2019 22:02:09 +0000 (17:02 -0500)]
Remove _configthreadlocale() calls in ecpg test suite.
This essentially reverts commits a772624b1 and 04fbe0e45, which
added "_configthreadlocale(_ENABLE_PER_THREAD_LOCALE)" calls to the
thread-related ecpg test programs. That was nothing but a hack,
because we shouldn't expect that ecpg-using applications have
done that for us; and now that we've inserted such calls into
ecpglib, the tests should still pass without it.
(If they don't, it would be good to know that.)
HEAD only; there seems no big need to change this in the
back branches.
Tom Lane [Thu, 24 Jan 2019 21:46:55 +0000 (16:46 -0500)]
Remove infinite-loop hazards in ecpg test suite.
A report from Andrew Dunstan showed that an ecpglib breakage that
causes repeated query failures could lead to infinite loops in some
ecpg test scripts, because they contain "while(1)" loops with no
exit condition other than successful test completion. That might
be all right for manual testing, but it seems entirely unacceptable
for automated test environments such as our buildfarm. We don't
want buildfarm owners to have to intervene manually when a test
goes wrong.
To fix, just change all those while(1) loops to exit after at most
100 iterations (which is more than any of them expect to iterate).
This seems sufficient since we'd see discrepancies in the test output
if any loop executed the wrong number of times.
I tested this by dint of intentionally breaking ecpg_do_prologue
to always fail, and verifying that the tests still got to completion.
Back-patch to all supported branches, since the whole point of this
exercise is to protect the buildfarm against future mistakes.
Peter Eisentraut [Thu, 24 Jan 2019 21:23:12 +0000 (22:23 +0100)]
PL/pgSQL: Add statement ID to statement structures
This can be used by a profiler as the index for an array of
per-statement metrics.
Author: Pavel Stehule <pavel.stehule@gmail.com> Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRDRCjN6rpM9ZccU7Ta_afsNX7mg9=n34F+r445Nt9v2tA@mail.gmail.com/
Alvaro Herrera [Thu, 24 Jan 2019 17:09:56 +0000 (14:09 -0300)]
Fix droppability of constraints upon partition detach
We were failing to set conislocal correctly for constraints in
partitions after partition detach, leading to those constraints becoming
undroppable. Fix by setting the flag correctly. Existing databases
might contain constraints with the conislocal wrongly set to false, for
partitions that were detached; this situation should be fixable by
applying an UPDATE on pg_constraint to set conislocal true. This
problem should otherwise be innocuous and should disappear across a
dump/restore or pg_upgrade.
Secondarily, when constraint drop was attempted in a partitioned table,
ATExecDropConstraint would try to recurse to partitions after doing
performDeletion() of the constraint in the partitioned table itself; but
since the constraint in the partitions are dropped by the initial call
of performDeletion() (because of following dependencies), the recursion
step would fail since it would not find the constraint, causing the
whole operation to fail. Fix by preventing recursion.
Reported-by: Amit Langote Diagnosed-by: Amit Langote
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Tom Lane [Thu, 24 Jan 2019 16:31:54 +0000 (11:31 -0500)]
Fix portability problem in pgbench.
The pgbench regression test supposed that srandom() with a specific value
would result in deterministic output from random(), as required by POSIX.
It emerges however that OpenBSD is too smart to be constrained by mere
standards, so their random() emits nondeterministic output anyway.
While a workaround does exist, what seems like a better fix is to stop
relying on the platform's srandom()/random() altogether, so that what
you get from --random-seed=N is not merely deterministic but platform
independent. Hence, use a separate pg_jrand48() random sequence in
place of random().
Also adjust the regression test case that's supposed to detect
nondeterminism so that it's more likely to detect it; the original
choice of random_zipfian parameter tended to produce the same output
all the time even if the underlying behavior wasn't deterministic.
In passing, improve pgbench's docs about random_zipfian().
Etsuro Fujita [Thu, 24 Jan 2019 07:49:17 +0000 (16:49 +0900)]
postgres_fdw: Account for tlist eval costs in estimate_path_cost_size().
Previously, estimate_path_cost_size() didn't account for tlist eval
costs, except when costing a foreign-grouping path using local
statistics, but such costs should be accounted for when costing that path
using remote estimates, because some of the tlist expressions might be
evaluated locally. Also, such costs should be accounted for in the case
of a foreign-scan or foreign-join path, because the tlist might contain
PlaceHolderVars, which postgres_fdw currently evaluates locally.
This also fixes an oversight in my commit f8f6e44676.
Like that commit, apply this to HEAD only to avoid destabilizing existing
plan choices.
Tom Lane [Thu, 24 Jan 2019 03:46:45 +0000 (22:46 -0500)]
Blind attempt to fix _configthreadlocale() failures on MinGW.
Apparently, some builds of MinGW contain a version of
_configthreadlocale() that always returns -1, indicating failure.
Rather than treating that as a curl-up-and-die condition, soldier on
as though the function didn't exist. This leaves us without thread
safety on such MinGW versions, but we didn't have it anyway.
Tatsuo Ishii [Wed, 23 Jan 2019 04:06:45 +0000 (13:06 +0900)]
Doc: fix typo in URL of OASIS group web site.
In other places that has been changed from http://www.oasis-open.org/
https://www.oasis-open.org/ but there's a place where the change was
missed.
Discussion: https://postgr.es/m/20190121.222844.399814306477973879.t-ishii%40sraoss.co.jp
Tomas Vondra [Tue, 22 Jan 2019 22:11:17 +0000 (23:11 +0100)]
Fix handling of volatile expressions in COPY FROM ... WHERE
The checking for calls to volatile functions in the COPY FROM ... WHERE
expression was treating all WHERE clauses as if containing such calls.
While that does not produce incorrect results, this disables batching
which may result in significant performance regression.
Andres Freund [Tue, 22 Jan 2019 01:03:15 +0000 (17:03 -0800)]
Move remaining code from tqual.[ch] to heapam.h / heapam_visibility.c.
Given these routines are heap specific, and that there will be more
generic visibility support in via table AM, it makes sense to move the
prototypes to heapam.h (routines like HeapTupleSatisfiesVacuum will
not be exposed in a generic fashion, because they are too storage
specific).
Similarly, the code in tqual.c is specific to heap, so moving it into
access/heap/ makes sense.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Andres Freund [Tue, 22 Jan 2019 01:03:15 +0000 (17:03 -0800)]
Move generic snapshot related code from tqual.h to snapmgr.h.
The code in tqual.c is largely heap specific. Due to the upcoming
pluggable storage work, it therefore makes sense to move it into
access/heap/ (as the file's header notes, the tqual name isn't very
good).
But the various statically allocated snapshot and snapshot
initialization functions are now (see previous commit) generic and do
not depend on functions declared in tqual.h anymore. Therefore move.
Also move XidInMVCCSnapshot as that's useful for future AMs, and
already used outside of tqual.c.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
Andres Freund [Tue, 22 Jan 2019 01:03:15 +0000 (17:03 -0800)]
Change snapshot type to be determined by enum rather than callback.
This is in preparation for allowing the same snapshot be used for
different table AMs. With the current callback based approach we would
need one callback for each supported AM, which clearly would not be
extensible. Thus add a new Snapshot->snapshot_type field, and move
the dispatch into HeapTupleSatisfiesVisibility() (which is now a
function). Later work will then dispatch calls to
HeapTupleSatisfiesVisibility() and other AMs visibility functions
depending on the type of the table. The central SnapshotType enum
also seems like a good location to centralize documentation about the
intended behaviour of various types of snapshots.
As tqual.h isn't included by bufmgr.h any more (as HeapTupleSatisfies*
isn't referenced by TestForOldSnapshot() anymore) a few files now need
to include it directly.
Author: Andres Freund, loosely based on earlier work by Haribabu Kommi
Discussion:
https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
https://postgr.es/m/20160812231527.GA690404@alvherre.pgsql
Tom Lane [Mon, 21 Jan 2019 23:33:32 +0000 (18:33 -0500)]
Remove useless bms_copy step in RelationGetIndexAttrBitmap.
Seems to be from a bad case of copy-and-paste-itis in commit 665d1fad9.
It wouldn't be quite so annoying if it didn't contradict the comment
half a dozen lines above.
Alvaro Herrera [Mon, 21 Jan 2019 22:59:07 +0000 (19:59 -0300)]
Create action triggers when partitions are detached
Detaching a partition from a partitioned table that's constrained by
foreign keys requires additional action triggers on the referenced side;
otherwise, DELETE/UPDATE actions there fail to notice rows in the table
that was partition, and so are incorrectly allowed through. With this
commit, those triggers are now created. Conversely, when a table that
has a foreign key is attached as a partition to a table that also has
the same foreign key, those action triggers are no longer needed, so we
remove them.
Add a minimal test case verifying (part of) this.
Authors: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/f2b8ead5-4131-d5a8-8016-2ea0a31250af@lab.ntt.co.jp
Alvaro Herrera [Mon, 21 Jan 2019 22:34:11 +0000 (19:34 -0300)]
Flush relcache entries when their FKs are meddled with
Back in commit 100340e2dcd0, we made relcache entries keep lists of the
foreign keys applying to the relation -- but we forgot to update
CacheInvalidateHeapTuple to flush those entries when new FKs got created
or existing ones updated/deleted. No bugs appear to have been reported
that would be explained by this ommission, but I noticed the problem
while working on an unrelated bugfix which clearly showed it. Fix by
adding relcache flush on relevant foreign key changes.
Backpatch to 9.6, like the aforementioned commit.
Discussion: https://postgr.es/m/201901211927.7mmhschxlejh@alvherre.pgsql Reviewed-by: Tom Lane
Tom Lane [Mon, 21 Jan 2019 21:17:10 +0000 (16:17 -0500)]
Second try at fixing ecpglib thread-safety problem.
While Windows (allegedly) has _configthreadlocale() pretty far back,
it seems MinGW didn't acquire support for that till more recently.
Fortunately, we can use an autoconf probe on that toolchain,
instead of guessing whether it's there. (Hm, I wonder whether Cygwin
will need this also.)
Andres Freund [Mon, 21 Jan 2019 18:14:09 +0000 (10:14 -0800)]
Introduce access/{table.h, relation.h}, for generic functions from heapam.h.
access/heapam contains functions that are very storage specific (say
heap_insert() and a lot of lower level functions), and fairly generic
infrastructure like relation_open(), heap_open() etc. In the upcoming
pluggable storage work we're introducing a layer between table
accesses in general and heapam, to allow for different storage
methods. For a bit cleaner separation it thus seems advantageous to
move generic functions like the aforementioned to their own headers.
access/relation.h will contain relation_open() etc, and access/table.h
will contain table_open() (formerly known as heap_open()). I've decided
for table.h not to include relation.h, but we might change that at a
later stage.
relation.h already exists in another directory, but the other
plausible name (rel.h) also conflicts. It'd be nice if there were a
non-conflicting name, but nobody came up with a suggestion. It's
possible that the appropriate way to address the naming conflict would
be to rename nodes/relation.h, which isn't particularly well named.
To avoid breaking a lot of extensions that just use heap_open() etc,
table.h has macros mapping the old names to the new ones, and heapam.h
includes relation, table.h. That also allows to keep the
bulk renaming of existing callers in a separate commit.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
Tom Lane [Mon, 21 Jan 2019 18:48:07 +0000 (13:48 -0500)]
Sort the dependent objects before recursing in findDependentObjects().
Historically, the notices output by DROP CASCADE tended to come out
in uncertain order, and in some cases you might get different claims
about which object depends on which other one. This is because we
just traversed the dependency tree in the order in which pg_depend
entries are seen, and nbtree has never promised anything about the
order of equal-keyed index entries. We've put up with that for years,
hacking regression tests when necessary to prevent them from emitting
unstable output. However, it's a problem for pending work that will
change nbtree's behavior for equal keys, as that causes unexpected
changes in the regression test results.
Hence, adjust findDependentObjects to sort the results of each
indexscan before processing them. The sort is on descending OID of
the dependent objects, hence more or less reverse creation order.
While this rule could still result in bogus regression test failures
if an OID wraparound occurred mid-test, that seems unlikely to happen
in any plausible development or packaging-test scenario.
This is enough to ensure output stability for ordinary DROP CASCADE
commands, but not for DROP OWNED BY, because that has a different
code path with the same problem. We might later choose to sort in
the DROP OWNED BY code as well, but this patch doesn't do so.
I've also not done anything about reverting the existing hacks to
suppress unstable DROP CASCADE output in specific regression tests.
It might be worth undoing those, but it seems like a distinct question.
The first indexscan loop in findDependentObjects is not touched,
meaning there is a hazard of unstable error reports from that too.
However, said hazard is not the fault of that code: it was designed
on the assumption that there could be at most one "owning" object
to complain about, and that assumption does not seem unreasonable.
The recent patch that added the possibility of multiple
DEPENDENCY_INTERNAL_AUTO links broke that assumption, but we should
fix that situation not band-aid around it. That's a matter for
another patch, though.
Tom Lane [Mon, 21 Jan 2019 17:07:02 +0000 (12:07 -0500)]
Avoid thread-safety problem in ecpglib.
ecpglib attempts to force the LC_NUMERIC locale to "C" while reading
server output, to avoid problems with strtod() and related functions.
Historically it's just issued setlocale() calls to do that, but that
has major problems if we're in a threaded application. setlocale()
itself is not required by POSIX to be thread-safe (and indeed is not,
on recent OpenBSD). Moreover, its effects are process-wide, so that
we could cause unexpected results in other threads, or another thread
could change our setting.
On platforms having uselocale(), which is required by POSIX:2008,
we can avoid these problems by using uselocale() instead. Windows
goes its own way as usual, but we can make it safe by using
_configthreadlocale(). Platforms having neither continue to use the
old code, but that should be pretty much nobody among current systems.
This should get back-patched, but let's see what the buildfarm
thinks of it first.
Michael Meskes and Tom Lane; thanks also to Takayuki Tsunakawa.
Etsuro Fujita [Mon, 21 Jan 2019 08:12:40 +0000 (17:12 +0900)]
Postpone generating tlists and EC members for inheritance dummy children.
Previously, in set_append_rel_size(), we generated tlists and EC members
for dummy children for possible use by partition-wise join, even if
partition-wise join was disabled or the top parent was not a partitioned
table, but adding such EC members causes noticeable planning speed
degradation for queries with certain kinds of join quals like
"(foo.x + bar.y) = constant" where foo and bar are partitioned tables in
cases where there are lots of dummy children, as the EC members lists
grow huge, especially for the ECs derived from such join quals, which
makes the search for the parent EC members in add_child_rel_equivalences()
very time-consuming. Postpone the work until such children are actually
involved in a partition-wise join.
Reported-by: Sanyo Capobiango Analyzed-by: Justin Pryzby and Alvaro Herrera
Author: Amit Langote, with a few additional changes by me Reviewed-by: Ashutosh Bapat
Backpatch-through: v11 where partition-wise join was added
Discussion: https://postgr.es/m/CAO698qZnrxoZu7MEtfiJmpmUtz3AVYFVnwzR%2BpqjF%3DrmKBTgpw%40mail.gmail.com
Tomas Vondra [Sat, 19 Jan 2019 22:48:16 +0000 (23:48 +0100)]
Allow COPY FROM to filter data using WHERE conditions
Extends the COPY FROM command with a WHERE condition, which allows doing
various types of filtering while importing the data (random sampling,
condition on a data column, etc.). Until now such filtering required
either preprocessing of the input data, or importing all data and then
filtering in the database. COPY FROM ... WHERE is an easy-to-use and
low-overhead alternative for most simple cases.
Per discussion, it's not desirable to add valgrind suppressions for
outside our own code base (e.g. glibc in this case), especially when
the suppressions may be platform-specific. There are better ways to
deal with that, e.g. by providing local suppressions.
Magnus Hagander [Sat, 19 Jan 2019 18:06:35 +0000 (19:06 +0100)]
Replace @postgresql.org with @lists.postgresql.org for mailinglists
Commit c0d0e54084 replaced the ones in the documentation, but missed out
on the ones in the code. Replace those as well, but unlike c0d0e54084,
don't backpatch the code changes to avoid breaking translations.
Tom Lane [Fri, 18 Jan 2019 20:06:26 +0000 (15:06 -0500)]
Use our own getopt() on OpenBSD.
Recent OpenBSD (at least 5.9 and up) has a version of getopt(3)
that will not cope with the "-:" spec we use to accept double-dash
options in postgres.c and postmaster.c. Admittedly, that's a hack
because POSIX only requires getopt() to allow alphanumeric option
characters. I have no desire to find another way, however, so
let's just do what we were already doing on Solaris: force use
of our own src/port/getopt.c implementation.
In passing, improve some of the comments around said implementation.
Per buildfarm and local testing. Back-patch to all supported branches.
Alvaro Herrera [Fri, 18 Jan 2019 17:49:40 +0000 (14:49 -0300)]
Fix creation of duplicate foreign keys on partitions
When creating a foreign key in a partitioned table, if some partitions
already have equivalent constraints, we wastefully create duplicates of
the constraints instead of attaching to the existing ones. That's
inconsistent with the de-duplication that is applied when a table is
attached as a partition. To fix, reuse the FK-cloning code instead of
having a separate code path.
Backpatch to Postgres 11. This is a subtle behavior change, but surely
a welcome one since there's no use in having duplicate foreign keys.
Discovered by Álvaro Herrera while thinking about a different problem
reported by Jesper Pedersen (bug #15587).
Alvaro Herrera [Fri, 18 Jan 2019 17:49:27 +0000 (14:49 -0300)]
Move CloneForeignKeyConstraints to tablecmds.c
My commit 3de241dba86f introduced some code to create a clone of a
foreign key to a partition, but I put it in pg_constraint.c because it
was too close to the contents of the pg_constraint row. With the
previous commit that split out the constraint tuple deconstruction into
its own routine, it makes more sense to have the FK-cloning function in
tablecmds.c, mostly because its static subroutine can then be used by a
future bugfix.
My initial posting of this patch had this routine as static in
tablecmds.c, but sadly this function is already part of the Postgres 11
ABI as exported from pg_constraint.c, so keep it as exported also just
to avoid breaking any possible users of it.
Alvaro Herrera [Fri, 18 Jan 2019 17:40:13 +0000 (14:40 -0300)]
Refactor duplicate code into DeconstructFkConstraintRow
My commit 3de241dba86f introduced some code (in tablecmds.c) to obtain
data from a pg_constraint row for a foreign key, that already existed in
ri_triggers.c. Split it out into its own routine in pg_constraint.c,
where it naturally belongs.
No functional code changes, only code movement.
Backpatch to pg11, because a future bugfix is simpler after this.
Tom Lane [Fri, 18 Jan 2019 16:05:11 +0000 (11:05 -0500)]
Avoid sometimes printing both tables and their columns in DROP CASCADE.
A cascaded drop might find independent reasons to drop both a table
and some column of the table (for instance, a schema drop might include
dropping a data type used in some table in the schema). Depending on
the order of visitation of pg_depend entries, we might report the
table column and the whole table as separate objects-to-be-dropped,
or we might only report the table. This is confusing and leads to
unstable regression test output, so fix it to report only the table
regardless of visitation order.
Per gripe from Peter Geoghegan. This is just cosmetic from a user's
standpoint, and we haven't actually seen regression test problems in
practice (yet), so I'll refrain from back-patching.
Peter Eisentraut [Fri, 18 Jan 2019 07:29:42 +0000 (08:29 +0100)]
configure: More use of AC_ARG_VAR
AC_ARG_VAR is necessary if an environment variable influences a
configure result that is then used by other tests that are cached.
With AC_ARG_VAR, a change in the variable is detected on subsequent
configure runs and the user is then advised to remove the cache.
This adds AC_ARG_VAR calls for: MSGFMT, PERL, PYTHON, TCLSH, XML2_CONFIG
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/30672.1546816567@sss.pgh.pa.us
projects / postgresql / log