Shoaib Meenai [Fri, 8 Jun 2018 00:41:01 +0000 (00:41 +0000)]
[CodeGen] Always use MSVC personality for windows-msvc targets
The windows-msvc target is meant to be ABI compatible with MSVC,
including the exception handling. Ensure that a windows-msvc triple
always equates to the MSVC personality being used.
This mostly affects the GNUStep and ObjFW Obj-C runtimes. To the best of
my knowledge, those are normally not used with windows-msvc triples. I
believe WinObjC is based on GNUStep (or it at least uses libobjc2), but
that also takes the approach of wrapping Obj-C exceptions in C++
exceptions, so the MSVC personality function is the right one to use
there as well.
Matt Morehouse [Fri, 8 Jun 2018 00:33:35 +0000 (00:33 +0000)]
[clang-fuzzer] Made loop_proto more "vectorizable".
Edited loop_proto and its converter to make more "vectorizable" code
according to kcc's comment in D47666
- Removed all while loops
- Can only index into array with induction variable
Shoaib Meenai [Fri, 8 Jun 2018 00:30:00 +0000 (00:30 +0000)]
Reapply "[Parse] Use CapturedStmt for @finally on MSVC"
This reapplies r334224 and adds explicit triples to some tests to fix
them on Windows (where otherwise they would have run with the default
windows-msvc triple, which I'm changing the behavior for).
Original commit message:
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Shoaib Meenai [Thu, 7 Jun 2018 22:54:54 +0000 (22:54 +0000)]
[Frontend] Disallow non-MSVC exception models for windows-msvc targets
The windows-msvc target is used for MSVC ABI compatibility, including
the exceptions model. It doesn't make sense to pair a windows-msvc
target with a non-MSVC exception model. This would previously cause an
assertion failure; explicitly error out for it in the frontend instead.
This also allows us to reduce the matrix of target/exception models a
bit (see the modified tests), and we can possibly simplify some of the
personality code in a follow-up.
Shoaib Meenai [Thu, 7 Jun 2018 22:24:20 +0000 (22:24 +0000)]
Revert "[Parse] Use CapturedStmt for @finally on MSVC"
This reverts commit r334224.
This is causing buildbot failures on Windows, presumably because some
tests don't specify a triple. I'll test this on Windows locally and
recommit with the tests fixed.
Reid Kleckner [Thu, 7 Jun 2018 21:39:04 +0000 (21:39 +0000)]
[MS] Re-add support for the ARM interlocked bittest intrinscs
Adds support for these intrinsics, which are ARM and ARM64 only:
_interlockedbittestandreset_acq
_interlockedbittestandreset_rel
_interlockedbittestandreset_nf
_interlockedbittestandset_acq
_interlockedbittestandset_rel
_interlockedbittestandset_nf
Refactor the bittest intrinsic handling to decompose each intrinsic into
its action, its width, and its atomicity.
Craig Topper [Thu, 7 Jun 2018 21:27:41 +0000 (21:27 +0000)]
[X86] Add builtins for VALIGNQ/VALIGND to enable proper target feature checking.
We still emit shufflevector instructions we just do it from CGBuiltin.cpp now. This ensures the intrinsics that use this are only available on CPUs that support the feature.
I also added range checking to the immediate, but only checked it is 8 bits or smaller. We should maybe be stricter since we never use all 8 bits, but gcc doesn't seem to do that.
Shoaib Meenai [Thu, 7 Jun 2018 20:07:52 +0000 (20:07 +0000)]
[Parse] Use CapturedStmt for @finally on MSVC
The body of a `@finally` needs to be executed on both exceptional and
non-exceptional paths. On landingpad platforms, this is straightforward:
the `@finally` body is emitted as a normal (non-exceptional) cleanup,
and then a catch-all is emitted which branches to that cleanup (the
cleanup has code to conditionally re-throw based on a flag which is set
by the catch-all).
Unfortunately, we can't use the same approach for MSVC exceptions, where
the catch-all will be emitted as a catchpad. We can't just branch to the
cleanup from within the catchpad, since we can only exit it via a
catchret, at which point the exception is destroyed and we can't
rethrow. We could potentially emit the finally body inside the catchpad
and have the normal cleanup path somehow branch into it, but that would
require some new IR construct that could branch into a catchpad.
Instead, after discussing it with Reid Kleckner, we decided that
frontend outlining was the best approach, similar to how SEH `__finally`
works today. We decided to use CapturedStmt (which was also suggested by
Reid) rather than CaptureFinder (which is what `__finally` uses) since
the latter doesn't handle a lot of cases we care about, e.g. self
accesses, property accesses, block captures, etc. Extending
CaptureFinder to handle those additional cases proved unwieldy, whereas
CapturedStmt already took care of all of those. In theory `__finally`
could also be moved over to CapturedStmt, which would remove some
existing limitations (e.g. the inability to capture this), although
CaptureFinder would still be needed for SEH filters.
The one case supported by `@finally` but not CapturedStmt (or
CaptureFinder for that matter) is arbitrary control flow out of the
`@finally`, e.g. having a return statement inside a `@finally`. We can
add that support as a follow-up, but in practice we've found it to be
used very rarely anyway.
Zachary Turner [Thu, 7 Jun 2018 19:58:58 +0000 (19:58 +0000)]
[FileSystem] Split up the OpenFlags enumeration.
This breaks the OpenFlags enumeration into two separate
enumerations: OpenFlags and CreationDisposition. The first
controls the behavior of the API depending on whether or not
the target file already exists, and is not a flags-based
enum. The second controls more flags-like values.
This yields a more easy to understand API, while also allowing
flags to be passed to the openForRead api, where most of the
values didn't make sense before. This also makes the apis more
testable as it becomes easy to enumerate all the configurations
which make sense, so I've added many new tests to exercise all
the different values.
Vitaly Buka [Thu, 7 Jun 2018 19:17:46 +0000 (19:17 +0000)]
Introducing single for loop into clang_proto_fuzzer
Summary:
Created a new protobuf and protobuf-to-C++ "converter" that wraps the entire C++ code in a single for loop.
- Slightly changed cxx_proto.proto -> cxx_loop_proto.proto
- Made some changes to proto_to_cxx files to handle the new kind of protobuf
- Created ExampleClangLoopProtoFuzzer to test new protobuf and "converter"
Craig Topper [Thu, 7 Jun 2018 17:28:03 +0000 (17:28 +0000)]
[X86] Add back builtins for _mm_slli_si128/_mm_srli_si128 and similar intrinsics.
We still lower them to native shuffle IR, but we do it in CGBuiltin.cpp now. This allows us to check the target feature and ensure the immediate fits in 8 bits.
This also improves our -O0 codegen slightly because we're able to see the zeroinitializer in the shuffle. It looks like it got lost behind a store+load previously.
Gabor Buella [Thu, 7 Jun 2018 08:48:36 +0000 (08:48 +0000)]
[CodeGen] Improve diagnostics related to target attributes
Summary:
When requirement imposed by __target__ attributes on functions
are not satisfied, prefer printing those requirements, which
are explicitly mentioned in the attributes.
This makes such messages more useful, e.g. printing avx512f instead of avx2
in the following scenario:
int main(void)
{
x();
}
$ clang foo.c
foo.c:7:2: error: always_inline function 'x' requires target feature 'avx2', but would be inlined into function 'main' that is compiled without support for 'avx2'
x();
^
1 error generated.
```
Richard Trieu [Thu, 7 Jun 2018 03:20:30 +0000 (03:20 +0000)]
Change return value of trivial visibility check.
Previous, if no Decl's were checked, visibility was set to false. Switch it
so that in cases of no Decl's, return true. These are the Decl's after being
filtered. Also remove an unreachable return statement since it is directly
after another return statement.
Craig Topper [Thu, 7 Jun 2018 02:46:02 +0000 (02:46 +0000)]
[X86] Add back _mask, _maskz, and _mask3 builtins for some 512-bit fmadd/fmsub/fmaddsub/fmsubadd builtins.
Summary:
We recently switch to using a selects in the intrinsics header files for FMA instructions. But the 512-bit versions support flavors with rounding mode which must be an Integer Constant Expression. This has forced those intrinsics to be implemented as macros. As it stands now the mask and mask3 intrinsics evaluate one of their macro arguments twice. If that argument itself is another intrinsic macro, we can end up over expanding macros. Or if its something we can CSE later it would show up multiple times when it shouldn't.
I tried adding __extension__ around the macro and making it an expression statement and declaring a local variable. But whatever name you choose for the local variable can never be used as the name of an input to the macro in user code. If that happens you would end up with the same name on the LHS and RHS of an assignment after expansion. We might be safe if we use __ in front of the variable names because those names are reserved and user code shouldn't use that, but I wasn't sure I wanted to make that claim.
The other option which I've chosen here, is to add back _mask, _maskz, and _mask3 flavors of the builtin which we will expand in CGBuiltin.cpp to replicate the argument as needed and insert any fneg needed on the third operand to make a subtract. The _maskz isn't truly necessary if we have an unmasked version or if we use the masked version with a -1 mask and wrap a select around it. But I've chosen to make things more uniform.
I separated out the scalar builtin handling to avoid too many things going on in EmitX86FMAExpr. It was different enough due to the extract and insert that the minor duplication of the CreateCall was probably worth it.
Shoaib Meenai [Wed, 6 Jun 2018 23:09:02 +0000 (23:09 +0000)]
[Driver] Stop passing -fseh-exceptions for x86_64-windows-msvc
-fseh-exceptions is only meaningful for MinGW targets, and that driver
already has logic to pass either -fdwarf-exceptions or -fseh-exceptions
as appropriate. -fseh-exceptions is just a no-op for MSVC triples, and
passing it to cc1 causes unnecessary confusion.
Yaxun Liu [Wed, 6 Jun 2018 19:44:10 +0000 (19:44 +0000)]
[HIP] Fix unbundling
HIP uses clang-offload-bundler to bundle intermediate files for host
and different gpu archs together. When a file is unbundled,
clang-offload-bundler should be called only once, and the objects
for host and different gpu archs should be passed to the next
jobs. This is because Driver maintains CachedResults which maps
triple-arch string to output files for each job.
This patch fixes a bug in Driver::BuildJobsForActionNoCache which
uses incorrect key for CachedResults for HIP which causes
clang-offload-bundler being called mutiple times and incorrect
output files being used.
Reid Kleckner [Wed, 6 Jun 2018 01:35:08 +0000 (01:35 +0000)]
Implement bittest intrinsics generically for non-x86 platforms
I tested these locally on an x86 machine by disabling the inline asm
codepath and confirming that it does the same bitflips as we do with the
inline asm.
Craig Topper [Wed, 6 Jun 2018 00:24:55 +0000 (00:24 +0000)]
[X86] Add builtins for vector element insert and extract for different 128 and 256 bit vector types. Use them to implement the extract and insert intrinsics.
Previously we were just using extended vector operations in the header file.
This unfortunately allowed non-constant indices to be used with the intrinsics. This is incompatible with gcc, icc, and MSVC. It also introduces a different performance characteristic because non-constant index gets lowered to a vector store and an element sized load.
By adding the builtins we can check for the index to be a constant and ensure its in range of the vector element count.
User code still has the option to use extended vector operations themselves if they need non-constant indexing.
Craig Topper [Tue, 5 Jun 2018 22:40:03 +0000 (22:40 +0000)]
[X86] Implement __builtin_ia32_vec_ext_v2si correctly even though we only use it with an index of 0.
This builtin takes an index as its second operand, but the codegen hardcodes an index of 0 and doesn't use the operand. The only use of the builtin in the header file passes 0 to the operand so this works for that usage. But its more correct to use the real operand.
Craig Topper [Tue, 5 Jun 2018 21:54:35 +0000 (21:54 +0000)]
[X86] Make __builtin_ia32_vec_ext_v2si require ICE for its index argument. Add warnings for out of range indices for __builtin_ia32_vec_ext_v2si, __builtin_ia32_vec_ext_v4hi, and __builtin_ia32_vec_set_v4hi.
These should take a constant value for an index and that constant should be a valid element number.
Yaxun Liu [Tue, 5 Jun 2018 15:11:02 +0000 (15:11 +0000)]
[CUDA][HIP] Do not emit type info when compiling for device
CUDA/HIP does not support RTTI on device side, therefore there
is no point of emitting type info when compiling for device.
Emitting type info for device not only clutters the IR with useless
global variables, but also causes undefined symbol at linking
since vtable for cxxabiv1::class_type_info has external linkage.
Jeremy Morse [Tue, 5 Jun 2018 09:18:26 +0000 (09:18 +0000)]
Detect an incompatible VLA pointer assignment
For pointer assignments of VLA types, Clang currently detects when array
dimensions _lower_ than a variable dimension differ, and reports a warning.
However it does not do the same when the _higher_ dimensions differ, a
case that GCC does catch.
These two pointer types
int (*foo)[1][bar][3];
int (*baz)[1][2][3];
are compatible with each another, and the program is well formed if
bar == 2, a matter that is the programmers problem. However the following:
int (*qux)[2][2][3];
would not be compatible with either, because the upper dimension differs
in size. Clang reports baz is incompatible with qux, but not that foo is
incompatible with qux because it doesn't check those higher dimensions.
Fix this by comparing array sizes on higher dimensions: if both are
constants but unequal then report incompatibility; if either dimension is
variable then we can't know either way.
Craig Topper [Tue, 5 Jun 2018 03:12:14 +0000 (03:12 +0000)]
[X86] Mark all the builtins and intrinsics that require MMX and an SSE feature as requiring both mmx and the sse feature.
Previously we only checked the sse feature, but this means that if you passed -mno-mmx, the builtins/intrinsics wouldn't be disabled in the frontend and would instead fail backend isel.
Reid Kleckner [Tue, 5 Jun 2018 01:33:40 +0000 (01:33 +0000)]
Reimplement the bittest intrinsic family as builtins with inline asm
We need to implement _interlockedbittestandset as a builtin for
windows.h, so we might as well do the whole family. It reduces code
duplication anyway.
Fixes PR33188, a long standing bug in our bittest implementation
encountered by Chakra.
Reid Kleckner [Mon, 4 Jun 2018 21:39:20 +0000 (21:39 +0000)]
Revert r333791 "Cap "voluntary" vector alignment at 16 for all Darwin platforms."
Adding __attribute__((aligned(32))) to __m256 breaks the implementation
of _mm256_loadu_ps on Windows. On Windows, alignment attributes have
higher precedence than packing attributes.
We also might want to carefully consider the consequences of changing
our vector typedefs, since many users copy them and invent their own
new, non-Intel specific vector type names.
Craig Topper [Mon, 4 Jun 2018 19:28:09 +0000 (19:28 +0000)]
[X86] Avoid passing _mm_undefined* to builtin_shufflevector if we are able to pass the first input a second time.
This is more consistent with other usages of builtin_shufflevector. Later optimization passes or codegen will detect the duplicate vector and replace it with undef. Using _mm_undefined just puts a zeroinitializer that still needs to be optimized out later.
Artem Dergachev [Mon, 4 Jun 2018 18:56:25 +0000 (18:56 +0000)]
[CFG] Fix automatic destructors when a member is bound to a reference.
In code like
const int &x = A().x;
automatic destructor for the object A() lifetime-extended by reference 'x' was
not present in the clang CFG due to ad-hoc pattern-matching in
getReferenceInitTemporaryType().
Re-use skipRValueSubobjectAdjustments() again to find the lifetime-extended
object in the AST and emit the correct destructor.
Lifetime extension through aggregates with references still needs to be covered.
Leonard Chan [Mon, 4 Jun 2018 16:07:52 +0000 (16:07 +0000)]
This diff includes changes for supporting the following types.
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent _Fract types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Fixed the test that was failing by not checking for dso_local on some
targets.
Summary: This is a prototype of a bug reporter visitor that invalidates bug reports by re-checking constraints of certain states on the bug path using the Z3 constraint manager backend. The functionality is available under the `crosscheck-with-z3` analyzer config flag.
Created a tiny SMT interface and make Z3ConstraintManager implement it
Summary:
This patch implements a simple SMTConstraintManager API, and requires the implementation of two methods for now: `addRangeConstraints` and `isModelFeasible`.
Update Z3ConstraintManager to inherit it and implement required methods.
I also moved the method to dump the SMT formula from D45517 to this patch.
This patch was created based on the reviews from D47640.
Craig Topper [Mon, 4 Jun 2018 02:56:18 +0000 (02:56 +0000)]
[X86] Fix a couple places that were using macro arguments twice when of the usages could just be undefined.
One of the arguments was being used when the passthru argument is unused due to the mask being all 1s. But in that case the actual value doesn't matter so we should use undef instead to avoid expanding the macro argument unnecessarily.
Craig Topper [Sun, 3 Jun 2018 19:42:59 +0000 (19:42 +0000)]
[X86] Replace __builtin_ia32_vbroadcastf128_pd256 and __builtin_ia32_vbroadcastf128_ps256 with an unaligned load intrinsics and a __builtin_shufflevector call.
Craig Topper [Sun, 3 Jun 2018 18:08:36 +0000 (18:08 +0000)]
[X86] When emitting masked loads/stores don't check for all ones mask.
This seems like a premature optimization. It's unlikely a user would pass something the frontend can tell is all ones to the masked load/store intrinsics.
We do this optimization for emitting select for masking because we have builtin calls in header files that pass an all ones mask in. Though at this point we may not longer have any builtins that emit some IR and a select. We may only have the select builtins so maybe we can remove that optimization too.
Leonard Chan [Sat, 2 Jun 2018 02:58:51 +0000 (02:58 +0000)]
This diff includes changes for supporting the following types.
```
// Primary fixed point types
signed short _Accum s_short_accum;
signed _Accum s_accum;
signed long _Accum s_long_accum;
unsigned short _Accum u_short_accum;
unsigned _Accum u_accum;
unsigned long _Accum u_long_accum;
// Aliased fixed point types
short _Accum short_accum;
_Accum accum;
long _Accum long_accum;
```
This diff only allows for declaration of the fixed point types. Assignment and other operations done on fixed point types according to http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1169.pdf will be added in future patches. The saturated versions of these types and the equivalent `_Fract` types will also be added in future patches.
The tests included are for asserting that we can declare these types.
Shoaib Meenai [Sat, 2 Jun 2018 01:22:39 +0000 (01:22 +0000)]
[cmake] Support LLD for CLANG_ORDER_FILE
LLD also supports order files using the `--symbol-ordering-file` option.
As the name would suggest, the order file format is slightly different
from gold; gold's order files specify section names, whereas LLD's
specify symbol names. Assuming you have an order file in the correct
format though, we should support using it with LLD.
Switch the check to actually use LLVM's linker detection rather than
just checking for the presence of the gold executable, since we might
have a gold executable present but be using LLD (or bfd for that matter)
as our linker.
John McCall [Fri, 1 Jun 2018 21:34:26 +0000 (21:34 +0000)]
Cap "voluntary" vector alignment at 16 for all Darwin platforms.
This fixes two major problems:
- We were not capping vector alignment as desired on 32-bit ARM.
- We were using different alignments based on the AVX settings on
Intel, so we did not have a consistent ABI.
This is an ABI break, but we think we can get away with it because
vectors tend to be used mostly in inline code (which is why not having
a consistent ABI has not proven disastrous on Intel).
Intel's AVX types are specified as having 32-byte / 64-byte alignment,
so align them explicitly instead of relying on the base ABI rule.
Note that this sort of attribute is stripped from template arguments
in template substitution, so there's a possibility that code templated
over vectors will produce inadequately-aligned objects. The right
long-term solution for this is for alignment attributes to be
interpreted as true qualifiers and thus preserved in the canonical type.
Craig Topper [Fri, 1 Jun 2018 18:26:35 +0000 (18:26 +0000)]
[X86] Rewrite avx512vbmi unmasked and maskz macro intrinsics to be wrappers around their __builtin function with appropriate arguments rather than just passing arguments to the masked intrinsic.
This is more consistent with all of our other avx512 macro intrinsics.
It also fixes a bad cast where an argument was casted to mmask8 when it should have been a mmask16.
Nico Weber [Fri, 1 Jun 2018 14:59:57 +0000 (14:59 +0000)]
clang-cl: Expose -no-canonical-prefixes
-no-canonical-prefixes is a weird flag: In gcc, it controls whether realpath()
is called on the path of the driver binary. It's needed to support some
usecases where gcc is symlinked to, see
https://gcc.gnu.org/ml/gcc/2011-01/msg00429.html for some background.
In clang, the resource dir is found relative to the compiler binary, and
without -no-canonical-prefixes that's an absolute path. For clang, the main use
case for -no-canonical-prefixes is to make the -resource-dir path added by the
driver relative instead of absolute. Making it relative seems like the better
default, but since neither clang not gcc have -canonical-prefixes without no-
which makes changing the default tricky, and since some symlink behaviors do
depend on the realpath() call at least for gcc, just expose
-no-canonical-prefixes in clang-cl mode.
Alternatively we could default to no-canonical-prefix-mode for clang-cl since
it's less likely to be used in symlinked scenarios, but since you already need
to about -no-canonical-prefixes for the non-clang-cl bits of your build, not
hooking this of driver mode seems better to me.
Erich Keane [Fri, 1 Jun 2018 13:04:26 +0000 (13:04 +0000)]
[OpenCL, OpenMP] Fix crash when OpenMP used in OpenCL file
Compiler crashes when omp simd is used in an OpenCL file:
clang -c -fopenmp omp_simd.cl
__kernel void test(global int *data, int size) {
#pragma omp simd
for (int i = 0; i < size; ++i) {
}
}
The problem seems to be the check added to verify block pointers have
initializers. An OMPCapturedExprDecl is created to capture ‘size’ but there is
no TypeSourceInfo.
Ilya Biryukov [Fri, 1 Jun 2018 09:49:53 +0000 (09:49 +0000)]
[CodeComplete] Add a few extra tests for r333538. NFC
From a follow-up discussion in D44480.
New tests check that function bodies are not skipped:
- In presence of ptr declarators, e.g. `auto**`.
- When `decltype(auto)` is used in return type, only `auto` was checked before.
Artem Dergachev [Fri, 1 Jun 2018 01:59:48 +0000 (01:59 +0000)]
[analyzer] NFC: Track all constructed objects in a single state trait.
ExprEngine already maintains three internal program state traits to track
path-sensitive information related to object construction: pointer returned by
operator new, and pointer to temporary object for two different purposes - for
destruction and for lifetime extension. We'll need to add 2-3 more in a few
follow-up commits.
Merge these traits into one because they all essentially serve one purpose and
work similarly.
[Modules] Warning for module declarations lacking 'framework' qualifier
When a module declaration for a framework lacks the 'framework'
qualifier, the listed headers aren't found (because there's no
trigger for the special framework style path lookup) and the module
is silently not built. This leads to frameworks not being modularized
by accident, which is pretty bad.
Add a warning and suggest the user to add the 'framework' qualifier
when we can prove that it's the case.
Heejin Ahn [Fri, 1 Jun 2018 01:01:37 +0000 (01:01 +0000)]
[WebAssembly] Hide new Wasm EH behind its feature flag
Summary:
clang's current wasm EH implementation is a non-MVP feature in progress.
We had a `-mexception-handling` wasm feature but were not using it. This
patch hides the non-MVP wasm EH behind a flag, so it does not affect
other code for now.
Dan Gohman [Fri, 1 Jun 2018 00:05:51 +0000 (00:05 +0000)]
[WebAssembly] Update to the new names for the memory builtin functions.
The WebAssembly committee has decided on the names `memory.size` and
`memory.grow` for the memory intrinsics, so update the clang builtin
functions to follow those names, keeping both sets of old names in place
for compatibility.
Heejin Ahn [Thu, 31 May 2018 22:18:13 +0000 (22:18 +0000)]
[WebAssembly] Use Windows EH instructions for Wasm EH
Summary:
Because wasm control flow needs to be structured, using WinEH
instructions to support wasm EH brings several benefits. This patch
makes wasm EH uses Windows EH instructions, with some changes:
1. Because wasm uses a single catch block to catch all C++ exceptions,
this merges all catch clauses into a single catchpad, within which we
test the EH selector as in Itanium EH.
2. Generates a call to `__clang_call_terminate` in case a cleanup
throws. Wasm does not have a runtime to handle this.
3. In case there is no catch-all clause, inserts a call to
`__cxa_rethrow` at the end of a catchpad in order to unwind to an
enclosing EH scope.
Reid Kleckner [Thu, 31 May 2018 18:42:29 +0000 (18:42 +0000)]
Fix null MSInheritanceAttr deref in CXXRecordDecl::getMSInheritanceModel()
Ensure latest MPT decl has a MSInheritanceAttr when instantiating
templates, to avoid null MSInheritanceAttr deref in
CXXRecordDecl::getMSInheritanceModel().
Artem Dergachev [Thu, 31 May 2018 18:30:41 +0000 (18:30 +0000)]
[analyzer] Annotate ProgramState update methods with LLVM_NODISCARD.
Because our program states are immutable, methods like "add<>", "set<>", "bind"
create a copy of the program state instead of mutating the existing state.
If the updated state is discarded, it clearly indicates a bug.
Such bugs are introduced frequently, hence the warn_unused_result annotation.
Artem Dergachev [Thu, 31 May 2018 17:22:38 +0000 (17:22 +0000)]
[analyzer] Improve performance of the SVal simplification mechanism.
When neither LHS nor RHS of a binary operator expression can be simplified,
return the original expression instead of re-evaluating the binary operator.
Such re-evaluation was causing recusrive re-simplification which caused
the algorithmic complexity to explode.
Aaron Ballman [Thu, 31 May 2018 13:57:09 +0000 (13:57 +0000)]
Add a new driver mode to dump compiler feature and extension options.
Add the ability to dump compiler option-related information to a JSON file via the -compiler-options-dump option. Specifically, it dumps the features/extensions lists -- however, this output could be extended to other information should it be useful. In order to support features and extensions, I moved them into a .def file so that we could build the various lists we care about from them without a significant increase in maintenance burden.
projects / clang / log