Tom Lane [Thu, 27 Mar 2014 02:43:22 +0000 (22:43 -0400)]
Document that Python 2.3 requires cdecimal module for full functionality.
This has been true for some time, but we were leaving users to discover it
the hard way.
Back-patch to 9.2. It might've been true before that, but we were claiming
Python 2.2 compatibility before that, so I won't guess at the exact
requirements back then.
Tom Lane [Wed, 26 Mar 2014 20:41:32 +0000 (16:41 -0400)]
Fix refcounting bug in PLy_modify_tuple().
We must increment the refcount on "plntup" as soon as we have the
reference, not sometime later. Otherwise, if an error is thrown in
between, the Py_XDECREF(plntup) call in the PG_CATCH block removes a
refcount we didn't add, allowing the object to be freed even though
it's still part of the plpython function's parsetree.
This appears to be the cause of crashes seen on buildfarm member
prairiedog. It's a bit surprising that we've not seen it fail repeatably
before, considering that the regression tests have been exercising the
faulty code path since 2009.
The real-world impact is probably minimal, since it's unlikely anyone would
be provoking the "TD["new"] is not a dictionary" error in production, and
that's the only case that is actually wrong. Still, it's a bug affecting
the regression tests, so patch all supported branches.
In passing, remove dead variable "plstr", and demote "platt" to a local
variable inside the PG_TRY block, since we don't need to clean it up
in the PG_CATCH path.
Pass more than the first XLogRecData entry to rm_desc, with WAL_DEBUG.
If you compile with WAL_DEBUG and enable it with wal_debug=on, we used to
only pass the first XLogRecData entry to the rm_desc routine. I think the
original assumprion was that the first XLogRecData entry contains all the
necessary information for the rm_desc routine, but that's a pretty shaky
assumption. At least standby_redo didn't get the memo.
To fix, piece together all the data in a temporary buffer, and pass that to
the rm_desc routine.
It's been like this forever, but the patch didn't apply cleanly to
back-branches. Probably wouldn't be hard to fix the conflicts, but it's
not worth the trouble.
Bruce Momjian [Wed, 26 Mar 2014 15:13:17 +0000 (11:13 -0400)]
psql: update "replica identity" display for \d+
Display "replica identity" only for \d plus mode, exclude system schema
objects, and display all possible values, not just non-default,
non-index ones.
Andrew Dunstan [Wed, 26 Mar 2014 14:18:24 +0000 (10:18 -0400)]
Cleanup around json_to_record/json_to_recordset
Set function parameter names and defaults. Add jsonb versions (which the
code already provided for so the actual new code is trivial). Add jsonb
regression tests and docs.
Bump catalog version (which I apparently forgot to do when jsonb was
committed).
Andrew Dunstan [Sun, 23 Mar 2014 20:40:19 +0000 (16:40 -0400)]
Introduce jsonb, a structured format for storing json.
The new format accepts exactly the same data as the json type. However, it is
stored in a format that does not require reparsing the orgiginal text in order
to process it, making it much more suitable for indexing and other operations.
Insignificant whitespace is discarded, and the order of object keys is not
preserved. Neither are duplicate object keys kept - the later value for a given
key is the only one stored.
The new type has all the functions and operators that the json type has,
with the exception of the json generation functions (to_json, json_agg etc.)
and with identical semantics. In addition, there are operator classes for
hash and btree indexing, and two classes for GIN indexing, that have no
equivalent in the json type.
This feature grew out of previous work by Oleg Bartunov and Teodor Sigaev, which
was intended to provide similar facilities to a nested hstore type, but which
in the end proved to have some significant compatibility issues.
Authors: Oleg Bartunov, Teodor Sigaev, Peter Geoghegan and Andrew Dunstan.
Review: Andres Freund
Noah Misch [Sun, 23 Mar 2014 06:16:34 +0000 (02:16 -0400)]
Offer triggers on foreign tables.
This covers all the SQL-standard trigger types supported for regular
tables; it does not cover constraint triggers. The approach for
acquiring the old row mirrors that for view INSTEAD OF triggers. For
AFTER ROW triggers, we spool the foreign tuples to a tuplestore.
This changes the FDW API contract; when deciding which columns to
populate in the slot returned from data modification callbacks, writable
FDWs will need to check for AFTER ROW triggers in addition to checking
for a RETURNING clause.
In support of the feature addition, refactor the TriggerFlags bits and
the assembly of old tuples in ModifyTable.
Ronan Dunklau, reviewed by KaiGai Kohei; some additional hacking by me.
Noah Misch [Sun, 23 Mar 2014 06:13:43 +0000 (02:13 -0400)]
Address ccvalid/ccnoinherit in TupleDesc support functions.
equalTupleDescs() neglected both of these ConstrCheck fields, and
CreateTupleDescCopyConstr() neglected ccnoinherit. At this time, the
only known behavior defect resulting from these omissions is constraint
exclusion disregarding a CHECK constraint validated by an ALTER TABLE
VALIDATE CONSTRAINT statement issued earlier in the same transaction.
Back-patch to 9.2, where these fields were introduced.
Also fix the name of the dtrace probe for LWLockAcquireOrWait(). The
function was renamed from LWLockWaitUntilFree to LWLockAqcuireOrWait, but
the dtrace probe was neglected.
Replace the XLogInsert slots with regular LWLocks.
The special feature the XLogInsert slots had over regular LWLocks is the
insertingAt value that was updated atomically with releasing backends
waiting on it. Add new functions to the LWLock API to do that, and replace
the slots with LWLocks. This reduces the amount of duplicated code.
(There's still some duplication, but at least it's all in lwlock.c now.)
Tom Lane [Thu, 20 Mar 2014 16:58:13 +0000 (12:58 -0400)]
Again fix initialization of auto-tuned effective_cache_size.
The previous method was overly complex and underly correct; in particular,
by assigning the default value with PGC_S_OVERRIDE, it prevented later
attempts to change the setting in postgresql.conf, as noted by Jeff Janes.
We should just assign the default value with source PGC_S_DYNAMIC_DEFAULT,
which will have the desired priority relative to the boot_val as well as
user-set values.
There is still a gap in this method: if there's an explicit assignment of
effective_cache_size = -1 in the postgresql.conf file, and that assignment
appears before shared_buffers is assigned, the code will substitute 4 times
the bootstrap default for shared_buffers, and that value will then persist
(since it will have source PGC_S_FILE). I don't see any very nice way
to avoid that though, and it's not a case to be expected in practice.
The existing comments in guc-file.l look forward to a redesign of the
DYNAMIC_DEFAULT mechanism; if that ever happens, we should consider this
case as one of the things we'd like to improve.
Alvaro Herrera [Wed, 19 Mar 2014 18:10:36 +0000 (15:10 -0300)]
Setup error context callback for transaction lock waits
With this in place, a session blocking behind another one because of
tuple locks will get a context line mentioning the relation name, tuple
TID, and operation being done on tuple. For example:
LOG: process 11367 still waiting for ShareLock on transaction 717 after 1000.108 ms
DETAIL: Process holding the lock: 11366. Wait queue: 11367.
CONTEXT: while updating tuple (0,2) in relation "foo"
STATEMENT: UPDATE foo SET value = 3;
Most usefully, the new line is displayed by log entries due to
log_lock_waits, although of course it will be printed by any other log
message as well.
Author: Christian Kruse, some tweaks by Álvaro Herrera Reviewed-by: Amit Kapila, Andres Freund, Tom Lane, Robert Haas
Tom Lane [Wed, 19 Mar 2014 15:09:24 +0000 (11:09 -0400)]
Fix memory leak during regular expression execution.
For a regex containing backrefs, pg_regexec() might fail to free all the
sub-DFAs that were created during execution, resulting in a permanent
(session lifespan) memory leak. Problem was introduced by me in commit 587359479acbbdc95c8e37da40707e37097423f5. Per report from Sandro Santilli;
diagnosis by Greg Stark.
It is no longer used, none of the resource managers have multi-record
actions that would make it unsafe to perform a restartpoint.
Also don't allow rm_cleanup to write WAL records, it's also no longer
required. Move the call to rm_cleanup routines to make it more symmetric
with rm_startup.
Make the handling of interrupted B-tree page splits more robust.
Splitting a page consists of two separate steps: splitting the child page,
and inserting the downlink for the new right page to the parent. Previously,
we handled the case that you crash in between those steps with a cleanup
routine after the WAL recovery had finished, which finished the incomplete
split. However, that doesn't help if the page split is interrupted but the
database doesn't crash, so that you don't perform WAL recovery. That could
happen for example if you run out of disk space.
Remove the end-of-recovery cleanup step. Instead, when a page is split, the
left page is marked with a new INCOMPLETE_SPLIT flag, and when the downlink
is inserted to the parent, the flag is cleared again. If an insertion sees
a page with the flag set, it knows that the split was interrupted for some
reason, and inserts the missing downlink before proceeding.
I used the same approach to fix GIN and GiST split algorithms earlier. This
was the last WAL cleanup routine, so we could get rid of that whole
machinery now, but I'll leave that for a separate patch.
Robert Haas [Tue, 18 Mar 2014 15:19:13 +0000 (11:19 -0400)]
Improve shm_mq portability around MAXIMUM_ALIGNOF and sizeof(Size).
Revise the original decision to expose a uint64-based interface and
use Size everywhere possible. Avoid assuming that MAXIMUM_ALIGNOF is
8, or making any assumption about the relationship between that value
and sizeof(Size). If MAXIMUM_ALIGNOF is bigger, we'll now insert
padding after the length word; if it's smaller, we are now prepared
to read and write the length word in chunks.
Robert Haas [Tue, 18 Mar 2014 11:58:53 +0000 (07:58 -0400)]
Make it easy to detach completely from shared memory.
The new function dsm_detach_all() can be used either by postmaster
children that don't wish to take any risk of accidentally corrupting
shared memory; or by forked children of regular backends with
the same need. This patch also updates the postmaster children that
already do PGSharedMemoryDetach() to do dsm_detach_all() as well.
Tom Lane [Mon, 17 Mar 2014 16:36:11 +0000 (12:36 -0400)]
During index build, check and elog (not just Assert) for broken HOT chain.
The recently-fixed bug in WAL replay could result in not finding a parent
tuple for a heap-only tuple. The existing code would either Assert or
generate an invalid index entry, neither of which is desirable. Throw a
regular error instead.
Fujii Masao [Mon, 17 Mar 2014 11:37:50 +0000 (20:37 +0900)]
Fix bug in clean shutdown of walsender that pg_receiving is connecting to.
On clean shutdown, walsender waits for all WAL to be replicated to a standby,
and exits. It determined whether that replication had been completed by
checking whether its sent location had been equal to a standby's flush
location. Unfortunately this condition never becomes true when the standby
such as pg_receivexlog which always returns an invalid flush location is
connecting to walsender, and then walsender waits forever.
This commit changes walsender so that it just checks a standby's write
location if a flush location is invalid.
Back-patch to 9.1 where enough infrastructure for this exists.
Tom Lane [Mon, 17 Mar 2014 01:55:02 +0000 (21:55 -0400)]
Fix unportable shell-script syntax in pg_upgrade's test.sh.
I discovered the hard way that on some old shells, the locution
FOO="" unset FOO
does not behave the same as
FOO=""; unset FOO
and in fact leaves FOO set to an empty string. test.sh was inconsistently
spelling it different ways on adjacent lines.
This got broken relatively recently, in commit c737a2e56, so the lack of
field reports to date doesn't represent a lot of evidence that the problem
is rare.
Tom Lane [Mon, 17 Mar 2014 01:43:40 +0000 (21:43 -0400)]
Fix advertised dispsize for libpq's sslmode connection parameter.
"8" was correct back when "disable" was the longest allowed value, but
since "verify-full" was added, it should be "12". Given the lack of
complaints, I wouldn't be surprised if nobody is actually using these
values ... but still, if they're in the API, they should be right.
Noticed while pursuing a different problem. It's been wrong for quite
a long time, so back-patch to all supported branches.
Magnus Hagander [Sun, 16 Mar 2014 14:18:52 +0000 (15:18 +0100)]
Cleanups from the remove-native-krb5 patch
krb_srvname is actually not available anymore as a parameter server-side, since
with gssapi we accept all principals in our keytab. It's still used in libpq for
client side specification.
In passing remove declaration of krb_server_hostname, where all the functionality
was already removed.
Noted by Stephen Frost, though a different solution than his suggestion
In short, we don't allow a page to be deleted if it's the rightmost child
of its parent, but that situation can change after we check for it.
Problem
-------
We check that the page to be deleted is not the rightmost child of its
parent, and then lock its left sibling, the page itself, its right sibling,
and the parent, in that order. However, if the parent page is split after
the check but before acquiring the locks, the target page might become the
rightmost child, if the split happens at the right place. That leads to an
error in vacuum (I reproduced this by setting a breakpoint in debugger):
ERROR: failed to delete rightmost child 41 of block 3 in index "foo_pkey"
We currently re-check that the page is still the rightmost child, and throw
the above error if it's not. We could easily just give up rather than throw
an error, but that approach doesn't scale to half-dead pages. To recap,
although we don't normally allow deleting the rightmost child, if the page
is the *only* child of its parent, we delete the child page and mark the
parent page as half-dead in one atomic operation. But before we do that, we
check that the parent can later be deleted, by checking that it in turn is
not the rightmost child of the grandparent (potentially recursing all the
way up to the root). But the same situation can arise there - the
grandparent can be split while we're not holding the locks. We end up with
a half-dead page that we cannot delete.
To make things worse, the keyspace of the deleted page has already been
transferred to its right sibling. As the README points out, the keyspace at
the grandparent level is "out-of-whack" until the half-dead page is deleted,
and if enough tuples with keys in the transferred keyspace are inserted, the
page might get split and a downlink might be inserted into the grandparent
that is out-of-order. That might not cause any serious problem if it's
transient (as the README ponders), but is surely bad if it stays that way.
Solution
--------
This patch changes the page deletion algorithm to avoid that problem. After
checking that the topmost page in the chain of to-be-deleted pages is not
the rightmost child of its parent, and then deleting the pages from bottom
up, unlink the pages from top to bottom. This way, the intermediate stages
are similar to the intermediate stages in page splitting, and there is no
transient stage where the keyspace is "out-of-whack". The topmost page in
the to-be-deleted chain doesn't have a downlink pointing to it, like a page
split before the downlink has been inserted.
This also allows us to get rid of the cleanup step after WAL recovery, if we
crash during page deletion. The deletion will be continued at next VACUUM,
but the tree is consistent for searches and insertions at every step.
This bug is old, all supported versions are affected, but this patch is too
big to back-patch (and changes the WAL record formats of related records).
We have not heard any reports of the bug from users, so clearly it's not
easy to bump into. Maybe backpatch later, after this has had some field
testing.
Tom Lane [Fri, 14 Mar 2014 00:59:42 +0000 (20:59 -0400)]
Prevent interrupts while reporting non-ERROR elog messages.
This should eliminate the risk of recursive entry to syslog(3), which
appears to be the cause of the hang reported in bug #9551 from James
Morton.
Arguably, the real problem here is auth.c's willingness to turn on
ImmediateInterruptOK while executing fairly wide swaths of backend code.
We may well need to work at narrowing the code ranges in which the
authentication_timeout interrupt is enabled. For the moment, though,
this is a cheap and reasonably noninvasive fix for a field-reported
failure; the other approach would be complex and not necessarily
bug-free itself.
Tom Lane [Thu, 13 Mar 2014 17:49:03 +0000 (13:49 -0400)]
Allow psql to print COPY command status in more cases.
Previously, psql would print the "COPY nnn" command status only for COPY
commands executed server-side. Now it will print that for frontend copies
too (including \copy). However, we continue to suppress the command status
for COPY TO STDOUT, since in that case the copy data has been routed to the
same place that the command status would go, and there is a risk of the
status line being mistaken for another line of COPY data. Doing that would
break existing scripts, and it doesn't seem worth the benefit --- this case
seems fairly analogous to SELECT, for which we also suppress the command
status.
Kumar Rajeev Rastogi, with substantial review by Amit Khandekar
Tom Lane [Thu, 13 Mar 2014 16:02:54 +0000 (12:02 -0400)]
Avoid transaction-commit race condition while receiving a NOTIFY message.
Use TransactionIdIsInProgress, then TransactionIdDidCommit, to distinguish
whether a NOTIFY message's originating transaction is in progress,
committed, or aborted. The previous coding could accept a message from a
transaction that was still in-progress according to the PGPROC array;
if the client were fast enough at starting a new transaction, it might fail
to see table rows added/updated by the message-sending transaction. Which
of course would usually be the point of receiving the message. We noted
this type of race condition long ago in tqual.c, but async.c overlooked it.
The race condition probably cannot occur unless there are multiple NOTIFY
senders in action, since an individual backend doesn't send NOTIFY signals
until well after it's done committing. But if two senders commit in close
succession, it's certainly possible that we could see the second sender's
message within the race condition window while responding to the signal
from the first one.
Per bug #9557 from Marko Tiikkaja. This patch is slightly more invasive
than what he proposed, since it removes the now-redundant
TransactionIdDidAbort call.
Back-patch to 9.0, where the current NOTIFY implementation was introduced.
Only WAL-log the modified portion in an UPDATE, if possible.
When a row is updated, and the new tuple version is put on the same page as
the old one, only WAL-log the part of the new tuple that's not identical to
the old. This saves significantly on the amount of WAL that needs to be
written, in the common case that most fields are not modified.
Amit Kapila, with a lot of back and forth with me, Robert Haas, and others.
Allow opclasses to provide tri-valued GIN consistent functions.
With the GIN "fast scan" feature, GIN can skip items without fetching all
the keys for them, if it can prove that they don't match regardless of
those keys. So far, it has done the proving by calling the boolean
consistent function with all combinations of TRUE/FALSE for the unfetched
keys, but since that's O(n^2), it becomes unfeasible with more than a few
keys. We can avoid calling consistent with all the combinations, if we can
tell the operator class implementation directly which keys are unknown.
This commit includes a triConsistent function for the built-in array and
tsvector opclasses.
In WAL replay, restore GIN metapage unconditionally to avoid torn page.
We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.
This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.
Reported by Noah Misch. Backpatch to all supported versions.
Tom Lane [Mon, 10 Mar 2014 19:47:06 +0000 (15:47 -0400)]
Fix tracking of psql script line numbers during \copy from another place.
Commit 08146775acd8bfe0fcc509c71857abb928697171 changed do_copy() to
temporarily scribble on pset.cur_cmd_source. That was a mighty ugly bit of
code in any case, but in particular it broke handleCopyIn's ability to tell
whether it was reading from the current script source file (in which case
pset.lineno should be incremented for each line of COPY data), or from
someplace else (in which case it shouldn't). The former case still worked,
the latter not so much. The visible effect was that line numbers reported
for errors in a script file would be wrong if there were an earlier \copy
that was reading anything other than inline-in-the-script-file data.
To fix, introduce another pset field that holds the file do_copy wants the
COPY code to use. This is a little bit ugly, but less so than passing the
file down explicitly through several layers that aren't COPY-specific.
Extracted from a larger patch by Kumar Rajeev Rastogi; that patch also
changes printing of COPY command tags, which is not a bug fix and shouldn't
get back-patched. This particular idea was from a suggestion by Amit
Khandekar, if I'm reading the thread correctly.
Back-patch to 9.2 where the faulty code was introduced.
Robert Haas [Mon, 10 Mar 2014 17:50:28 +0000 (13:50 -0400)]
Allow logical decoding via the walsender interface.
In order for this to work, walsenders need the optional ability to
connect to a database, so the "replication" keyword now allows true
or false, for backward-compatibility, and the new value "database"
(which causes the "dbname" parameter to be respected).
walsender needs to loop not only when idle but also when sending
decoded data to the user and when waiting for more xlog data to decode.
This means that there are now three separate loops inside walsender.c;
although some refactoring has been done here, this is still a bit ugly.
Andres Freund, with contributions from Álvaro Herrera, and further
review by me.
Robert Haas [Mon, 10 Mar 2014 14:17:19 +0000 (10:17 -0400)]
Teach on_exit_reset() to discard pending cleanups for dsm.
If a postmaster child invokes fork() and then calls on_exit_reset, that
should be sufficient to let it exit() without breaking anything, but
dynamic shared memory broke that by not updating on_exit_reset() to
discard callbacks registered with dynamic shared memory segments.
Bruce Momjian [Sat, 8 Mar 2014 17:15:25 +0000 (12:15 -0500)]
pg_ctl: improve handling of invalid data directory
Return '4' and report a meaningful error message when a non-existent or
invalid data directory is passed. Previously, pg_ctl would just report
the server was not running.
Patch by me and Amit Kapila
Report from Peter Eisentraut
Tom Lane [Fri, 7 Mar 2014 22:02:48 +0000 (17:02 -0500)]
Remove unportable use of anonymous unions from reorderbuffer.h.
In b89e151054a I had assumed it was ok to use anonymous unions as
struct members, but while a longstanding extension in many compilers,
it's only been standardized in C11.
To fix, remove one of the anonymous unions which tried to hide some
implementation specific enum values and give the other a name. The
latter unfortunately requires changes in output plugins, but since the
feature has only been added a few days ago...