Tom Lane [Wed, 22 Jun 2016 15:55:18 +0000 (11:55 -0400)]
Make "postgres -C guc" print "" not "(null)" for null-valued GUCs.
Commit 0b0baf262 et al made this case print "(null)" on the grounds that
that's what happened on platforms that didn't crash. But neither behavior
was actually intentional. What we should print is just an empty string,
for compatibility with the behavior of SHOW and other ways of examining
string GUCs. Those code paths don't distinguish NULL from empty strings,
so we should not here either. Per gripe from Alain Radix.
Like the previous patch, back-patch to 9.2 where -C option was introduced.
Tom Lane [Wed, 22 Jun 2016 00:07:58 +0000 (20:07 -0400)]
Document that dependency tracking doesn't consider function bodies.
If there's anyplace in our SGML docs that explains this behavior, I can't
find it right at the moment. Add an explanation in "Dependency Tracking"
which seems like the authoritative place for such a discussion. Per
gripe from Michelle Schwan.
While at it, update this section's example of a dependency-related
error message: they last looked like that in 8.3. And remove the
explanation of dependency updates from pre-7.3 installations, which
is probably no longer worth anybody's brain cells to read.
The bogus error message example seems like an actual documentation bug,
so back-patch to all supported branches.
Tom Lane [Tue, 21 Jun 2016 22:38:20 +0000 (18:38 -0400)]
Refactor planning of projection steps that don't need a Result plan node.
The original upper-planner-pathification design (commit 3fc6e2d7f5b652b4)
assumed that we could always determine during Path formation whether or not
we would need a Result plan node to perform projection of a targetlist.
That turns out not to work very well, though, because createplan.c still
has some responsibilities for choosing the specific target list associated
with sorting/grouping nodes (in particular it might choose to add resjunk
columns for sorting). We might not ever refactor that --- doing so would
push more work into Path formation, which isn't attractive --- and we
certainly won't do so for 9.6. So, while create_projection_path and
apply_projection_to_path can tell for sure what will happen if the subpath
is projection-capable, they can't tell for sure when it isn't. This is at
least a latent bug in apply_projection_to_path, which might think it can
apply a target to a non-projecting node when the node will end up computing
something different.
Also, I'd tied the creation of a ProjectionPath node to whether or not a
Result is needed, but it turns out that we sometimes need a ProjectionPath
node anyway to avoid modifying a possibly-shared subpath node. Callers had
to use create_projection_path for such cases, and we added code to them
that knew about the potential omission of a Result node and attempted to
adjust the cost estimates for that. That was uncertainly correct and
definitely ugly/unmaintainable.
To fix, have create_projection_path explicitly check whether a Result
is needed and adjust its cost estimate accordingly, though it creates
a ProjectionPath in either case. apply_projection_to_path is now mostly
just an optimized version that can avoid creating an extra Path node when
the input is known to not be shared with any other live path. (There
is one case that create_projection_path doesn't handle, which is pushing
parallel-safe expressions below a Gather node. We could make it do that
by duplicating the GatherPath, but there seems no need as yet.)
create_projection_plan still has to recheck the tlist-match condition,
which means that if the matching situation does get changed by createplan.c
then we'll have made a slightly incorrect cost estimate. But there seems
no help for that in the near term, and I doubt it occurs often enough,
let alone would change planning decisions often enough, to be worth
stressing about.
I added a "dummypp" field to ProjectionPath to track whether
create_projection_path thinks a Result is needed. This is not really
necessary as-committed because create_projection_plan doesn't look at the
flag; but it seems like a good idea to remember what we thought when
forming the cost estimate, if only for debugging purposes.
In passing, get rid of the target_parallel parameter added to
apply_projection_to_path by commit 54f5c5150. I don't think that's a good
idea because it involves callers in what should be an internal decision,
and opens us up to missing optimization opportunities if callers think they
don't need to provide a valid flag, as most don't. For the moment, this
just costs us an extra has_parallel_hazard call when planning a Gather.
If that starts to look expensive, I think a better solution would be to
teach PathTarget to carry/cache knowledge of parallel-safety of its
contents.
Tom Lane [Mon, 20 Jun 2016 14:49:19 +0000 (10:49 -0400)]
Fix comparison of similarity to threshold in GIST trigram searches.
There was some very strange code here, dating to commit b525bf77, that
purported to work around an ancient gcc bug by forcing a float4 comparison
to be done as int instead. Commit 5871b8848 broke that when it changed
one side of the comparison to "double" but left the comparison code alone.
Commit f576b17cd doubled down on the weirdness by introducing a "volatile"
marker, which had nothing to do with the actual problem.
Guess that the gcc bug, even if it's still present in the wild, was
triggered by comparison of float4's and can be avoided if we store the
result of cnt_sml() into a double before comparing to the double "nlimit".
This will at least work correctly on non-broken compilers, and it's way
more readable.
Per bug #14202 from Greg Navis. Add a regression test based on his
example.
Tom Lane [Sun, 19 Jun 2016 17:11:40 +0000 (13:11 -0400)]
Docs: improve description of psql's %R prompt escape sequence.
Dilian Palauzov pointed out in bug #14201 that the docs failed to mention
the possibility of %R producing '(' due to an unmatched parenthesis.
He proposed just adding that in the same style as the other options were
listed; but it seemed to me that the sentence was already nearly
unintelligible, so I rewrote it a bit more extensively.
Tom Lane [Sat, 18 Jun 2016 23:38:59 +0000 (19:38 -0400)]
Improve error message annotation for GRANT/REVOKE on untrusted PLs.
The annotation for "ERROR: language "foo" is not trusted" used to say
"HINT: Only superusers can use untrusted languages", which was fairly
poorly thought out. For one thing, it's not a hint about what to do,
but a statement of fact, which makes it errdetail. But also, this
fails to clarify things much, because there's a missing step in the
chain of reasoning. I think it's more useful to say "GRANT and REVOKE
are not allowed on untrusted languages, because only superusers can use
untrusted languages".
It's been like this for a long time, but given the lack of previous
complaints, I don't think this is worth back-patching.
Tom Lane [Sat, 18 Jun 2016 19:22:34 +0000 (15:22 -0400)]
Restore foreign-key-aware estimation of join relation sizes.
This patch provides a new implementation of the logic added by commit 137805f89 and later removed by 77ba61080. It differs from the original
primarily in expending much less effort per joinrel in large queries,
which it accomplishes by doing most of the matching work once per query not
once per joinrel. Hopefully, it's also less buggy and better commented.
The never-documented enable_fkey_estimates GUC remains gone.
There remains work to be done to make the selectivity estimates account
for nulls in FK referencing columns; but that was true of the original
patch as well. We may be able to address this point later in beta.
In the meantime, any error should be in the direction of overestimating
rather than underestimating joinrel sizes, which seems like the direction
we want to err in.
Tom Lane [Sat, 18 Jun 2016 04:28:51 +0000 (00:28 -0400)]
Still another try at fixing scanjoin_target insertion into parallel plans.
The previous code neglected the fact that the scanjoin_target might
carry sortgroupref labelings that we need to absorb. Instead, do
create_projection_path() unconditionally, and tweak the path's cost
estimate after the fact. (I'm now convinced that we ought to refactor
the way we account for sometimes not needing a separate projection step,
but right now is not the time for that sort of cleanup.)
Tom Lane [Sat, 18 Jun 2016 03:08:21 +0000 (23:08 -0400)]
Fix parallel-safety markings for contrib/dblink.
As shown by buildfarm reports, dblink_build_sql_insert and
dblink_build_sql_update are *not* parallel safe, because they
may attempt to access temporary tables of the local session.
Although dblink_build_sql_delete doesn't actually touch the
contents of the referenced table, it seems consistent and prudent
to mark it PARALLEL RESTRICTED too.
Tom Lane [Sat, 18 Jun 2016 01:44:37 +0000 (21:44 -0400)]
Fix handling of argument and result datatypes for partial aggregation.
When doing partial aggregation, the args list of the upper (combining)
Aggref node is replaced by a Var representing the output of the partial
aggregation steps, which has either the aggregate's transition data type
or a serialized representation of that. However, nodeAgg.c blindly
continued to use the args list as an indication of the user-level argument
types. This broke resolution of polymorphic transition datatypes at
executor startup (though it accidentally failed to fail for the ANYARRAY
case, which is likely the only one anyone had tested). Moreover, the
constructed FuncExpr passed to the finalfunc contained completely wrong
information, which would have led to bogus answers or crashes for any case
where the finalfunc examined that information (which is only likely to be
with polymorphic aggregates using a non-polymorphic transition type).
As an independent bug, apply_partialaggref_adjustment neglected to resolve
a polymorphic transition datatype before assigning it as the output type
of the lower-level Aggref node. This again accidentally failed to fail
for ANYARRAY but would be unlikely to work in other cases.
To fix the first problem, record the user-level argument types in a
separate OID-list field of Aggref, and look to that rather than the args
list when asking what the argument types were. (It turns out to be
convenient to include any "direct" arguments in this list too, although
those are not currently subject to being overwritten.)
Rather than adding yet another resolve_aggregate_transtype() call to fix
the second problem, add an aggtranstype field to Aggref, and store the
resolved transition type OID there when the planner first computes it.
(By doing this in the planner and not the parser, we can allow the
aggregate's transition type to change from time to time, although no DDL
support yet exists for that.) This saves nothing of consequence for
simple non-polymorphic aggregates, but for polymorphic transition types
we save a catalog lookup during executor startup as well as several
planner lookups that are new in 9.6 due to parallel query planning.
In passing, fix an error that was introduced into count_agg_clauses_walker
some time ago: it was applying exprTypmod() to something that wasn't an
expression node at all, but a TargetEntry. exprTypmod silently returned
-1 so that there was not an obvious failure, but this broke the intended
sensitivity of aggregate space consumption estimates to the typmod of
varchar and similar data types. This part needs to be back-patched.
Catversion bump due to change of stored Aggref nodes.
This requires some core changes as well so that we can properly
WAL-log the truncation. Specifically, it changes the format of the
XLOG_SMGR_TRUNCATE WAL record, so bump XLOG_PAGE_MAGIC.
Patch by me, reviewed but not fully endorsed by Andres Freund.
Robert Haas [Fri, 17 Jun 2016 20:25:02 +0000 (16:25 -0400)]
Try again to fix the way the scanjoin_target is used with partial paths.
Commit 04ae11f62e643e07c411c4935ea6af46cb112aa9 removed some broken
code to apply the scan/join target to partial paths, but its theory
that this processing step is totally unnecessary turns out to be wrong.
Put similar code back again, but this time, check for parallel-safety
and avoid in-place modifications to paths that may already have been
used as part of some other path.
(This is not an entirely elegant solution to this problem; it might
be better, for example, to postpone generate_gather_paths for the
topmost scan/join rel until after the scan/join target has been
applied. But this is not the time for such redesign work.)
Robert Haas [Fri, 17 Jun 2016 19:48:57 +0000 (15:48 -0400)]
Add VACUUM (DISABLE_PAGE_SKIPPING) for emergencies.
If you really want to vacuum every single page in the relation,
regardless of apparent visibility status or anything else, you can use
this option. In previous releases, this behavior could be achieved
using VACUUM (FREEZE), but because we can now recognize all-frozen
pages as not needing to be frozen again, that no longer works. There
should be no need for routine use of this option, but maybe bugs or
disaster recovery will necessitate its use.
Robert Haas [Fri, 17 Jun 2016 19:09:57 +0000 (15:09 -0400)]
Update dblink extension for parallel query.
Almost all functions provided by this extension are PARALLEL
RESTRICTED. Mostly, that's because the leader's TCP connections won't
be shared with the workers, but in some cases like dblink_get_pkey
it's because they obtain locks which might be released early if taken
within a parallel worker. dblink_fdw_validator probably can't be used
in a query anyway, but there would be no problem from the point of
view of parallel query if it were, so it's PARALLEL SAFE.
Robert Haas [Fri, 17 Jun 2016 12:35:47 +0000 (08:35 -0400)]
Attempt to fix broken regression test.
In commit 8c1d9d56e9a00680a035b8b333a98ea16b121eb7, I attempted to
add a regression test that would fail if the target list was pushed
into a parallel worker, but due to brain fade on my part, it just
randomly fails whether anything bad or not, because the error check
inside the parallel_restricted() function tests whether there is
*any process in the system* that is not connected to a client, not
whether the process running the query is not connected to a client.
A little experimentation has left me pessimistic about the
prospects of doing better here in a short amount of time, so let's
just fall back to checking that the plan is as we expect and leave
the execution-time check for another day.
Tom Lane [Thu, 16 Jun 2016 21:16:32 +0000 (17:16 -0400)]
Fix validation of overly-long IPv6 addresses.
The inet/cidr types sometimes failed to reject IPv6 inputs with too many
colon-separated fields, instead translating them to '::/0'. This is the
result of a thinko in the original ISC code that seems to be as yet
unreported elsewhere. Per bug #14198 from Stefan Kaltenbrunner.
Tom Lane [Thu, 16 Jun 2016 19:20:29 +0000 (15:20 -0400)]
Fix fuzzy thinking in ReinitializeParallelDSM().
The fact that no workers were successfully launched in the previous
iteration does not excuse us from setting up properly to try again.
This appears to explain crashes I saw in parallel regression testing
due to error_mqh being NULL when it shouldn't be.
Tom Lane [Thu, 16 Jun 2016 17:47:20 +0000 (13:47 -0400)]
Invent min_parallel_relation_size GUC to replace a hard-wired constant.
The main point of doing this is to allow the cutoff to be set very small,
even zero, to allow parallel-query behavior to be tested on relatively
small tables such as we typically use in the regression tests. But it
might be of use to users too. The number-of-workers scaling behavior in
create_plain_partial_paths() is pretty ad-hoc and subject to change, so
we won't expose anything about that, but the notion of not considering
parallel query at all for tables below size X seems reasonably stable.
Tom Lane [Thu, 16 Jun 2016 16:17:03 +0000 (12:17 -0400)]
Avoid crash in "postgres -C guc" for a GUC with a null string value.
Emit "(null)" instead, which was the behavior all along on platforms
that don't crash, eg OS X. Per report from Jehan-Guillaume de Rorthais.
Back-patch to 9.2 where -C option was introduced.
Tom Lane [Wed, 15 Jun 2016 23:31:08 +0000 (19:31 -0400)]
Use strftime("%c") to format timestamps in psql's \watch command.
This allows the timestamps to follow local conventions (in particular,
they respond to the LC_TIME environment setting). In C locale you get
the same results as before. It seems like a good idea to do this now not
later because we already changed the format of \watch headers for 9.6.
Also, increase the buffer sizes a tad to ensure there's enough space for
translated strings.
Robert Haas [Wed, 15 Jun 2016 18:59:07 +0000 (14:59 -0400)]
Fix regression test for force_parallel_mode=on.
Commit 14a254fb52423c57059851abafbd1247261f7f03 managed not to
exercise the code it was intended to test, and the comment explaining
why no "parallel worker" line showed up in the context wasn't right.
Robert Haas [Wed, 15 Jun 2016 18:33:58 +0000 (14:33 -0400)]
Add integrity-checking functions to pg_visibility.
The new pg_check_visible() and pg_check_frozen() functions can be used to
verify that the visibility map bits for a relation's data pages match the
actual state of the tuples on those pages.
Amit Kapila and Robert Haas, reviewed (in earlier versions) by Andres
Freund. Additional testing help by Thomas Munro.
Robert Haas [Wed, 15 Jun 2016 18:23:39 +0000 (14:23 -0400)]
Fix lazy_scan_heap so that it won't mark pages all-frozen too soon.
Commit a892234f830e832110f63fc0a2afce2fb21d1584 added a new bit per
page to the visibility map fork indicating whether the page is
all-frozen, but incorrectly assumed that if lazy_scan_heap chose to
freeze a tuple then that tuple would not need to later be frozen
again. This turns out to be false, because xmin and xmax (and
conceivably xvac, if dealing with tuples from very old releases) could
be frozen at separate times.
Thanks to Andres Freund for help in uncovering and tracking down this
issue.
Robert Haas [Wed, 15 Jun 2016 15:40:07 +0000 (11:40 -0400)]
Mark some functions parallel-unsafe.
currtid() and currtid2() call GetLatestSnapshot(), which fails in
parallel mode. pg_export_snapshot() calls ExportSnapshot() which
attempts to assign an XID for the current transaction if it does not
already have one; that, too, will fail in parallel mode.
Tom Lane [Wed, 15 Jun 2016 14:52:53 +0000 (10:52 -0400)]
Force idle_in_transaction_session_timeout off in pg_dump and autovacuum.
We disable statement_timeout and lock_timeout during dump and restore, to
prevent any global settings that might exist from breaking routine backups.
Commit c6dda1f48 should have added idle_in_transaction_session_timeout to
that list, but failed to.
Another place where these timeouts get turned off is autovacuum. While
I doubt an idle timeout could fire there, it seems better to be safe than
sorry.
pg_dump issue noted by Bernd Helmle, the other one found by grepping.
Robert Haas [Tue, 14 Jun 2016 18:52:55 +0000 (14:52 -0400)]
Update sslinfo extension for parallel query.
All functions provided by this extension are PARALLEL RESTRICTED,
because they provide information about the connection state. Parallel
workers don't have this information and therefore these functions
can't be executed in a worker (but they can be present in a query some
other part of which uses parallelism).
Robert Haas [Tue, 14 Jun 2016 17:34:37 +0000 (13:34 -0400)]
Update extensions with GIN/GIST support for parallel query.
Commit 749a787c5b25ae33b3d4da0ef12aa05214aa73c7 bumped the extension
version on all of these extensions already, and we haven't had a
release since then, so we can make further changes without bumping the
extension version again. Take this opportunity to mark all of the
functions exported by these modules PARALLEL SAFE -- except for
pg_trgm's set_limit(). Mark that one PARALLEL RESTRICTED, because it
makes a persistent change to a GUC value.
Note that some of the markings added by this commit don't have any
effect; for example, gseg_picksplit() isn't likely to be mentioned
explicitly in a query and therefore it's parallel-safety marking will
never be consulted. But this commit just marks everything for
consistency: if it were somehow used in a query, that would be fine as
far as parallel query is concerned, since it does not consult any
backend-private state, attempt to write data, etc.
Robert Haas [Tue, 14 Jun 2016 15:48:27 +0000 (11:48 -0400)]
postgres_fdw: Check PlaceHolderVars before pushing down a join.
As discovered by Andreas Seltenreich via sqlsmith, it's possible for a
remote join to need to generate a target list which contains a
PlaceHolderVar which would need to be evaluated on the remote server.
This happens when we try to push down a join tree which contains outer
joins and the nullable side of the join contains a subquery which
evauates some expression which can go to NULL above the level of the
join. Since the deparsing logic can't build a remote query that
involves subqueries, it fails while trying to produce an SQL query
that can be sent to the remote side. Detect such cases and don't try
to push down the join at all.
It's actually fine to push down the join if the PlaceHolderVar needs
to be evaluated at the current join level. This patch makes a small
change to build_tlist_to_deparse so that this case will work.
Tom Lane [Tue, 14 Jun 2016 14:47:06 +0000 (10:47 -0400)]
Minor fixes in contrib installation scripts.
Extension scripts should never use CREATE OR REPLACE for initial object
creation. If there is a collision with a pre-existing (probably
user-created) object, we want extension installation to fail, not silently
overwrite the user's object. Bloom and sslinfo both violated this precept.
Also fix a number of scripts that had no standard header (the file name
comment and the \echo...\quit guard). Probably the \echo...\quit hack
is less important now than it was in 9.1 days, but that doesn't mean
that individual extensions get to choose whether to use it or not.
And fix a couple of evident copy-and-pasteos in file name comments.
No need for back-patch: the REPLACE bugs are both new in 9.6, and the
rest of this is pretty much cosmetic.
Robert Haas [Tue, 14 Jun 2016 12:55:50 +0000 (08:55 -0400)]
postgres_fdw: Promote an Assert() to elog().
Andreas Seltenreich reports that it is possible for a PlaceHolderVar
to creep into this tlist, and I fear that even after that's fixed we
might have other, similar bugs in this area either now or in the
future. There's a lot of action-at-a-distance here, because the
validity of this assertion depends on core planner behavior; so, let's
use elog() to make sure we catch this even in non-assert builds,
rather than just crashing.
Tom Lane [Mon, 13 Jun 2016 17:53:10 +0000 (13:53 -0400)]
Fix multiple minor infelicities in aclchk.c error reports.
pg_type_aclmask reported the wrong type's OID when complaining that
it could not find a type's typelem. It also failed to provide a
suitable errcode when the initially given OID doesn't exist (which
is a user-facing error, since that OID can be user-specified).
pg_foreign_data_wrapper_aclmask and pg_foreign_server_aclmask likewise
lacked errcode specifications. Trivial cosmetic adjustments too.
The wrong-type-OID problem was reported by Petru-Florin Mihancea in
bug #14186; the other issues noted by me while reading the code.
These errors all seem to be aboriginal in the respective routines, so
back-patch as necessary.
Tom Lane [Mon, 13 Jun 2016 16:59:25 +0000 (12:59 -0400)]
In planner.c, avoid assuming that all PathTargets have sortgrouprefs.
The struct definition for PathTarget specifies that a NULL sortgrouprefs
pointer means no sortgroupref labels. While it's likely that there
should always be at least one labeled column in the places that were
unconditionally fetching through the pointer, it seems wiser to adhere to
the data structure specification and test first. Add a macro to make this
convenient. Per experimentation with running the regression tests with a
very small parallelization threshold --- the crash I observed may well
represent a bug elsewhere, but still this coding was not very robust.
Tom Lane [Mon, 13 Jun 2016 15:50:27 +0000 (11:50 -0400)]
Remove extraneous leading whitespace in Windows build script.
Apparently, at least some versions of Microsoft's shell fail on variable
assignments that have leading whitespace. This instance, introduced in
commit 680513ab7, managed to escape notice for awhile because it's only
invoked if building with OpenSSL. Per bug #14185 from Torben Dannhauer.
Andres Freund [Fri, 10 Jun 2016 22:31:11 +0000 (15:31 -0700)]
Change default of backend_flush_after GUC to 0 (disabled).
While beneficial, both for throughput and average/worst case latency, in
a significant number of workloads, there are other workloads in which
backend_flush_after can cause significant performance regressions in
comparison to < 9.6 releases. The regression is most likely when the hot
data set is bigger than shared buffers, but significantly smaller than
the operating system's page cache.
I personally think that the benefit of enabling backend flush control is
considerably bigger than the potential downsides, but a fair argument
can be made that not regressing is more important than improving
performance/latency. As the latter is the consensus, change the default
to 0.
The other settings introduced in 428b1d6b2 do not have the same
potential for regressions, so leave them enabled.
Benchmarks leading up to changing the default have been performed by
Mithun Cy, Ashutosh Sharma and Robert Haas.
Tom Lane [Fri, 10 Jun 2016 20:20:03 +0000 (16:20 -0400)]
Remove reltarget_has_non_vars flag.
Commit b12fd41c6 added a "reltarget_has_non_vars" field to RelOptInfo,
but failed to maintain it accurately. Since its only purpose was to skip
calls to has_parallel_hazard() in the simple case where a rel's targetlist
is all Vars, and that call is really pretty cheap in that case anyway, it
seems like this is just a case of premature optimization. Let's drop the
flag and do the calls unconditionally until it's proven that we need more
smarts here.
Tom Lane [Fri, 10 Jun 2016 20:03:37 +0000 (16:03 -0400)]
Refactor to reduce code duplication for function property checking.
As noted by Andres Freund, we'd accumulated quite a few similar functions
in clauses.c that examine all functions in an expression tree to see if
they satisfy some boolean test. Reduce the duplication by inventing a
function check_functions_in_node() that applies a simple callback function
to each SQL function OID appearing in a given expression node. This also
fixes some arguable oversights; for example, contain_mutable_functions()
did not check aggregate or window functions for mutability. I doubt that
that represents a live bug at the moment, because we don't really consider
mutability for aggregates; but it might someday be one.
I chose to put check_functions_in_node() in nodeFuncs.c because it seemed
like other modules might wish to use it in future. That in turn forced
moving set_opfuncid() et al into nodeFuncs.c, as the alternative was for
nodeFuncs.c to depend on optimizer/setrefs.c which didn't seem very clean.
In passing, teach contain_leaked_vars_walker() about a few more expression
node types it can safely look through, and improve the rather messy and
undercommented code in has_parallel_hazard_walker().
Robert Haas [Fri, 10 Jun 2016 14:42:01 +0000 (10:42 -0400)]
Update pg_stat_statements extension for parallel query.
All functions provided by this extension are PARALLEL SAFE. Given the
general prohibition against write operations in parallel queries, it is
perhaps a bit surprising that pg_stat_statements_reset() is parallel safe.
But since it only modifies shared memory, not the database, it's OK.
Kevin Grittner [Fri, 10 Jun 2016 14:25:31 +0000 (09:25 -0500)]
Fix interaction between CREATE INDEX and "snapshot too old".
Since indexes are created without valid LSNs, an index created
while a snapshot older than old_snapshot_threshold existed could
cause queries to return incorrect results when those old snapshots
were used, if any relevant rows had been subject to early pruning
before the index was built. Prevent usage of a newly created index
until all such snapshots are released, for relations where this can
happen.
Questions about the interaction of "snapshot too old" with index
creation were initially raised by Andres Freund.
Tom Lane [Fri, 10 Jun 2016 00:16:11 +0000 (20:16 -0400)]
Improve the situation for parallel query versus temp relations.
Transmit the leader's temp-namespace state to workers. This is important
because without it, the workers do not really have the same search path
as the leader. For example, there is no good reason (and no extant code
either) to prevent a worker from executing a temp function that the
leader created previously; but as things stood it would fail to find the
temp function, and then either fail or execute the wrong function entirely.
We still prohibit a worker from creating a temp namespace on its own.
In effect, a worker can only see the session's temp namespace if the leader
had created it before starting the worker, which seems like the right
semantics.
Also, transmit the leader's BackendId to workers, and arrange for workers
to use that when determining the physical file path of a temp relation
belonging to their session. While the original intent was to prevent such
accesses entirely, there were a number of holes in that, notably in places
like dbsize.c which assume they can safely access temp rels of other
sessions anyway. We might as well get this right, as a small down payment
on someday allowing workers to access the leader's temp tables. (With
this change, directly using "MyBackendId" as a relation or buffer backend
ID is deprecated; you should use BackendIdForTempRelations() instead.
I left a couple of such uses alone though, as they're not going to be
reachable in parallel workers until we do something about localbuf.c.)
Move the thou-shalt-not-access-thy-leader's-temp-tables prohibition down
into localbuf.c, which is where it actually matters, instead of having it
in relation_open(). This amounts to recognizing that access to temp
tables' catalog entries is perfectly safe in a worker, it's only the data
in local buffers that is problematic.
Having done all that, we can get rid of the test in has_parallel_hazard()
that says that use of a temp table's rowtype is unsafe in parallel workers.
That test was unduly expensive, and if we really did need such a
prohibition, that was not even close to being a bulletproof guard for it.
(For example, any user-defined function executed in a parallel worker
might have attempted such access.)
Tom Lane [Thu, 9 Jun 2016 20:44:25 +0000 (16:44 -0400)]
Handle contrib's GIN/GIST support function signature changes honestly.
In commits 9ff60273e35cad6e and dbe2328959e12701 I (tgl) fixed the
signatures of a bunch of contrib's GIN and GIST support functions so that
they would pass validation by the recently-added amvalidate functions.
The backend does not actually consult or check those signatures otherwise,
so I figured this was basically cosmetic and did not require an extension
version bump. However, Alexander Korotkov pointed out that that would
leave us in a pretty messy situation if we ever wanted to redefine those
functions later, because there wouldn't be a unique way to name them.
Since we're going to be bumping these extensions' versions anyway for
parallel-query cleanups, let's take care of this now.
Andreas Karlsson, adjusted for more search-path-safety by me
Robert Haas [Thu, 9 Jun 2016 16:40:23 +0000 (12:40 -0400)]
Don't generate parallel paths for rels with parallel-restricted outputs.
Such paths are unsafe. To make it cheaper to detect when this case
applies, track whether a relation's default PathTarget contains any
non-Vars. In most cases, the answer will be no, which enables us to
determine cheaply that the target list for a proposed path is
parallel-safe. However, subquery pull-up can create cases that
require us to inspect the target list more carefully.
Tom Lane [Thu, 9 Jun 2016 15:58:00 +0000 (11:58 -0400)]
Clarify documentation of ceil/ceiling/floor functions.
Document these as "nearest integer >= argument" and "nearest integer <=
argument", which will hopefully be less confusing than the old formulation.
New wording is from Matlab via Dean Rasheed.
I changed the pg_description entries as well as the SGML docs. In the
back branches, this will only affect installations initdb'd in the future,
but it should be harmless otherwise.
Tom Lane [Thu, 9 Jun 2016 15:16:26 +0000 (11:16 -0400)]
Mop-up for parallel degree-ectomy.
Fix a couple of overlooked uses of "degree" terminology. Make the parallel
worker count selection logic in create_plain_partial_paths more robust (in
particular, it failed with max_parallel_workers_per_gather set to zero).
Robert Haas [Thu, 9 Jun 2016 13:08:27 +0000 (09:08 -0400)]
Eliminate "parallel degree" terminology.
This terminology provoked widespread complaints. So, instead, rename
the GUC max_parallel_degree to max_parallel_workers_per_gather
(leaving room for a possible future GUC max_parallel_workers that acts
as a system-wide limit), and rename the parallel_degree reloption to
parallel_workers. Rename structure members to match.
These changes create a dump/restore hazard for users of PostgreSQL
9.6beta1 who have set the reloption (or applied the GUC using ALTER
USER or ALTER DATABASE).
Tom Lane [Thu, 9 Jun 2016 04:30:59 +0000 (00:30 -0400)]
Polish the documentation concerning phrase text search.
Fix grammar, improve examples, etc.
I did not attempt to document the current behavior concerning distance-zero
matches, because I think that's broken and needs to change, so I'm not
going to use up brain cells figuring out how to explain how it works now.
One way or the other, there's still more to write here.
Alvaro Herrera [Tue, 7 Jun 2016 23:18:31 +0000 (19:18 -0400)]
Make psql_crosstab plans more stable
To achieve this, ANALYZE the data table before querying it, as suggested
by Tom Lane. On my system, this enables the test to pass with 128 kB of
work_mem (a value with which other tests fail -- so it seems good
enough).
Alvaro Herrera [Tue, 7 Jun 2016 22:55:18 +0000 (18:55 -0400)]
nls-global.mk: search build dir for source files, too
In VPATH builds, the build directory was not being searched for files in
GETTEXT_FILES, leading to failure to construct the .pot files. This has
bit me all along, but never hard enough to get it fixed; I suppose not a
lot of people uses VPATH and NLS-enabled builds, and those that do,
don't do "make update-po" often.
This is a longstanding problem, so backpatch all the way back.
Alvaro Herrera [Tue, 7 Jun 2016 22:18:26 +0000 (18:18 -0400)]
Fix thinko in description of table_name parameter
Commit 6820094d1 mixed up types of parent object (table) with type of
sub-object being commented on. Noticed while fixing docs for
COMMENT ON ACCESS METHOD.
Tom Lane [Tue, 7 Jun 2016 21:21:17 +0000 (17:21 -0400)]
Revert "Use Foreign Key relationships to infer multi-column join selectivity".
This commit reverts 137805f89 as well as the associated commits 015e88942, 5306df283, and 68d704edb. We found multiple bugs in this feature, and
there was concern about possible planner slowdown (though to be fair,
exhibiting a very large slowdown proved difficult). The way forward
requires a considerable rewrite, which may or may not be possible to
accomplish in time for beta2. In my judgment reviewing the rewrite will
be easier to accomplish starting from a clean slate, so let's temporarily
revert what's there now. This also leaves us in a safe state if it turns
out to be necessary to postpone the rewrite to the next development cycle.
doc: Update wording about direct system catalog manipulation
It was previously suggested that "esoteric" operations such as creating
a new access method would require direct manipulation of the system
catalogs, but that example has gone away, and I can't think of a new one
to replace it, so just put in some weasel wording.
projects / postgresql / log