]>
granicus.if.org Git - vim/log
Bram Moolenaar [Mon, 14 Oct 2019 20:01:57 +0000 (22:01 +0200)]
patch 8.1.2149: crash when running out of memory very early
Problem: Crash when running out of memory very early.
Solution: Do not use IObuff when it's NULL. (closes #5052)
Bram Moolenaar [Sun, 13 Oct 2019 19:01:34 +0000 (21:01 +0200)]
patch 8.1.2148: no test for right click extending Visual area
Problem: No test for right click extending Visual area.
Solution: Add a test. (Dominique Pelle, closes #5018)
Bram Moolenaar [Sun, 13 Oct 2019 17:49:26 +0000 (19:49 +0200)]
patch 8.1.2147: crash when allocating memory fails
Problem: Crash when allocating memory fails. (Zu-Ming Jiang)
Solution: Check that 'spellcapcheck' is not NULL. (closes #5048)
Bram Moolenaar [Sun, 13 Oct 2019 14:59:08 +0000 (16:59 +0200)]
patch 8.1.2146: build failure
Problem: Build failure.
Solution: Include omitted changed file.
Bram Moolenaar [Sun, 13 Oct 2019 14:43:39 +0000 (16:43 +0200)]
patch 8.1.2145: cannot map <C-H> when modifyOtherKeys is enabled
Problem: Cannot map <C-H> when modifyOtherKeys is enabled.
Solution: Add the <C-H> mapping twice, both with modifier and as 0x08. Use
only the first one when modifyOtherKeys has been detected.
Bram Moolenaar [Sat, 12 Oct 2019 19:08:59 +0000 (21:08 +0200)]
patch 8.1.2144: side effects when using t_ti to enable modifyOtherKeys
Problem: Side effects when using t_ti to enable modifyOtherKeys.
Solution: Add t_TI and t_TE.
Bram Moolenaar [Sat, 12 Oct 2019 18:17:40 +0000 (20:17 +0200)]
patch 8.1.2143: cannot see each command even when 'verbose' is set
Problem: Cannot see each command even when 'verbose' is set.
Solution: List each command when 'verbose' is at least 16.
Bram Moolenaar [Sat, 12 Oct 2019 16:22:50 +0000 (18:22 +0200)]
patch 8.1.2142: some key mappings do not work with modifyOtherKeys
Problem: Some key mappings do not work with modifyOtherKeys.
Solution: Remove the Shift modifier if it is already included in the key.
Bram Moolenaar [Sat, 12 Oct 2019 15:07:06 +0000 (17:07 +0200)]
patch 8.1.2141: :tselect has an extra hit-enter prompt
Problem: :tselect has an extra hit-enter prompt.
Solution: Do not set need_wait_return when only moving the cursor.
(closes #5040)
Bram Moolenaar [Sat, 12 Oct 2019 14:12:54 +0000 (16:12 +0200)]
patch 8.1.2140: "gk" and "gj" do not work correctly in number column
Problem: "gk" and "gj" do not work correctly in number column.
Solution: Allow for a negative "curswant". (Zach Wegner, closes #4969)
Bram Moolenaar [Sat, 12 Oct 2019 13:36:11 +0000 (15:36 +0200)]
patch 8.1.2139: the modifyOtherKeys codes are not tested
Problem: The modifyOtherKeys codes are not tested.
Solution: Add a test case.
Bram Moolenaar [Sat, 12 Oct 2019 13:02:47 +0000 (15:02 +0200)]
patch 8.1.2138: including the build number in the Win32 binary is confusing
Problem: Including the build number in the Win32 binary is confusing.
Solution: Only use the patchlevel.
Bram Moolenaar [Sat, 12 Oct 2019 11:25:44 +0000 (13:25 +0200)]
patch 8.1.2137: parsing the termresponse is not tested
Problem: Parsing the termresponse is not tested.
Solution: Add a first test. (related to #5042)
Bram Moolenaar [Fri, 11 Oct 2019 19:19:13 +0000 (21:19 +0200)]
patch 8.1.2136: using freed memory with autocmd from fuzzer
Problem: using freed memory with autocmd from fuzzer. (Dhiraj Mishra,
Dominique Pelle)
Solution: Avoid using "wp" after autocommands. (closes #5041)
Bram Moolenaar [Thu, 10 Oct 2019 19:49:28 +0000 (21:49 +0200)]
patch 8.1.2135: with modifyOtherKeys Alt-a does not work properly
Problem: With modifyOtherKeys Alt-a does not work properly.
Solution: Remove the ALT modifier. Get multi-byte after applying ALT.
Bram Moolenaar [Thu, 10 Oct 2019 19:14:03 +0000 (21:14 +0200)]
patch 8.1.2134: modifier keys are not always recognized
Problem: Modifier keys are not always recognized.
Solution: Handle key codes generated by xterm with modifyOtherKeys set.
Add this to libvterm so we can debug it.
Bram Moolenaar [Thu, 10 Oct 2019 14:46:17 +0000 (16:46 +0200)]
patch 8.1.2133: some tests fail when run as root
Problem: Some tests fail when run as root.
Solution: Add CheckNotRoot and use it. (James McCoy, closes #5020)
Bram Moolenaar [Thu, 10 Oct 2019 14:36:00 +0000 (16:36 +0200)]
patch 8.1.2132: MS-Windows: screen mess when not recognizing insider build
Problem: MS-Windows: screen mess when not recognizing insider build.
Solution: Always move the cursor to the first column first. (Nobuhiro
Takasaki, closes #5036)
Bram Moolenaar [Thu, 10 Oct 2019 12:08:26 +0000 (14:08 +0200)]
patch 8.1.2131: MSVC tests fail
Problem: MSVC tests fail.
Solution: Replace backslashes with slashes.
Bram Moolenaar [Thu, 10 Oct 2019 11:39:08 +0000 (13:39 +0200)]
patch 8.1.2130: MSVC build fails
Problem: MSVC build fails.
Solution: Add the source file name explicitly.
Bram Moolenaar [Thu, 10 Oct 2019 11:30:12 +0000 (13:30 +0200)]
patch 8.1.2129: using hard coded executable path in test
Problem: Using hard coded executable path in test.
Solution: Use v:progpath. Use $VIMRUNTIME instead of "runtime". (James
McCoy, closes #5025)
Bram Moolenaar [Thu, 10 Oct 2019 11:22:54 +0000 (13:22 +0200)]
patch 8.1.2128: renamed libvterm sources makes merging difficult
Problem: Renamed libvterm sources makes merging difficult.
Solution: Rename back to the original name and only rename the .o files.
Also clean the libvterm build artifacts. (James McCoy,
closes #5027)
Bram Moolenaar [Wed, 9 Oct 2019 20:53:08 +0000 (22:53 +0200)]
patch 8.1.2127: the indent.c file is a bit big
Problem: The indent.c file is a bit big.
Solution: Move C-indent code a a new cindent.c file. Move other
indent-related code to indent.c. (Yegappan Lakshmanan,
closes #5031)
Bram Moolenaar [Wed, 9 Oct 2019 20:01:25 +0000 (22:01 +0200)]
patch 8.1.2126: viminfo not sufficiently tested
Problem: Viminfo not sufficiently tested.
Solution: Add more test cases. Clean up comments. (Yegappan Lakshmanan,
closes #5032)
Bram Moolenaar [Tue, 8 Oct 2019 21:26:50 +0000 (23:26 +0200)]
patch 8.1.2125: fnamemodify() fails when repeating :e
Problem: Fnamemodify() fails when repeating :e.
Solution: Do not go before the tail. (Rob Pilling, closes #5024)
Bram Moolenaar [Tue, 8 Oct 2019 20:20:35 +0000 (22:20 +0200)]
patch 8.1.2124: ruler is not updated if win_execute() moves cursor
Problem: Ruler is not updated if win_execute() moves cursor.
Solution: Update the status line. (closes #5022)
Bram Moolenaar [Tue, 8 Oct 2019 18:15:39 +0000 (20:15 +0200)]
patch 8.1.2123: parsing CSI sequence is messy
Problem: Parsing CSI sequence is messy.
Solution: Generalize parsing a CSI sequence.
Bram Moolenaar [Mon, 7 Oct 2019 20:38:58 +0000 (22:38 +0200)]
patch 8.1.2122: cannot build without terminal feature
Problem: Cannot build without terminal feature.
Solution: Add #ifdef.
Bram Moolenaar [Mon, 7 Oct 2019 20:27:36 +0000 (22:27 +0200)]
patch 8.1.2121: mode is not updated when switching to terminal
Problem: Mode is not updated when switching to terminal in Insert mode.
Solution: Redraw the mode when entering a terminal window. (Jason Franklin)
Bram Moolenaar [Sun, 6 Oct 2019 20:00:13 +0000 (22:00 +0200)]
patch 8.1.2120: some MB_ macros are more complicated than necessary
Problem: Some MB_ macros are more complicated than necessary. (Dominique
Pelle)
Solution: Simplify the macros. Expand inline.
Bram Moolenaar [Sun, 6 Oct 2019 18:08:38 +0000 (20:08 +0200)]
patch 8.1.2119: memory access error for empty string
Problem: memory access error for empty string when 'encoding' is a single
byte encoding.
Solution: Check for empty string when getting the length. (Dominique Pelle,
closes #5021, closes #5007)
Bram Moolenaar [Sun, 6 Oct 2019 10:02:15 +0000 (12:02 +0200)]
patch 8.1.2118: termcodes test fails when $TERM is "dumb"
Problem: Termcodes test fails when $TERM is "dumb".
Solution: Skip the test. (James McCoy, closes #5019)
Bram Moolenaar [Sat, 5 Oct 2019 19:57:12 +0000 (21:57 +0200)]
patch 8.1.2117: CursorLine highlight used while 'cursorline' is off
Problem: CursorLine highlight used while 'cursorline' is off.
Solution: Check 'cursorline' is set. (cloes #5017)
Bram Moolenaar [Sat, 5 Oct 2019 19:35:16 +0000 (21:35 +0200)]
patch 8.1.2116: no check for out of memory
Problem: No check for out of memory.
Solution: Check for NULL pointer.
Bram Moolenaar [Sat, 5 Oct 2019 10:09:32 +0000 (12:09 +0200)]
patch 8.1.2115: MS-Windows: shell commands fail if &shell contains a space
Problem: MS-Windows: shell commands fail if &shell contains a space.
Solution: Use quotes instead of escaping. (closes #4920)
Bram Moolenaar [Sat, 5 Oct 2019 09:56:54 +0000 (11:56 +0200)]
patch 8.1.2114: when a popup is closed with CTRL-C the callback aborts
Problem: When a popup is closed with CTRL-C the callback aborts.
Solution: Reset got_int when invoking the callback. (closes #5008)
Bram Moolenaar [Sat, 5 Oct 2019 09:30:09 +0000 (11:30 +0200)]
patch 8.1.2113: ":help expr-!~?" only works after searching
Problem: ":help expr-!~?" only works after searching.
Solution: Escape "~" after "expr-". (closes #5015)
Bram Moolenaar [Fri, 4 Oct 2019 19:29:12 +0000 (21:29 +0200)]
patch 8.1.2112: build number for ConPTY is outdated
Problem: Build number for ConPTY is outdated.
Solution: Update to new build number. (Nobuhiro Takasaki, closes #5014)
Bram Moolenaar [Fri, 4 Oct 2019 19:20:25 +0000 (21:20 +0200)]
patch 8.1.2111: viminfo file not sufficiently tested
Problem: Viminfo file not sufficiently tested.
Solution: Add more tests. (Yegappan Lakshmanan, closes #5009)
Bram Moolenaar [Thu, 3 Oct 2019 20:35:52 +0000 (22:35 +0200)]
patch 8.1.2110: CTRL-C closes two popups instead of one
Problem: CTRL-C closes two popups instead of one.
Solution: Reset got_int when the filter consumed the key.
Bram Moolenaar [Wed, 2 Oct 2019 21:06:46 +0000 (23:06 +0200)]
patch 8.1.2109: popup_getoptions() hangs with tab-local popup
Problem: popup_getoptions() hangs with tab-local popup.
Solution: Correct pointer name. (Marko Mahnič, closes #5006)
Bram Moolenaar [Tue, 1 Oct 2019 15:39:04 +0000 (17:39 +0200)]
patch 8.1.2108: cannot close the cmdline window from CmdWinEnter
Problem: Cannot close the cmdline window from CmdWinEnter. (George Brown)
Solution: Reset cmdwin_result earlier. (Christian Brabandt, closes #4980)
Bram Moolenaar [Tue, 1 Oct 2019 15:02:16 +0000 (17:02 +0200)]
patch 8.1.2107: various memory leaks reported by asan
Problem: Various memory leaks reported by asan.
Solution: Free the memory. (Ozaki Kiichi, closes #5003)
Bram Moolenaar [Tue, 1 Oct 2019 12:19:07 +0000 (14:19 +0200)]
patch 8.1.2106: no tests for dragging the mouse beyond the window
Problem: No tests for dragging the mouse beyond the window.
Solution: Add a test. (Dominique Pelle, closes #5004)
Bram Moolenaar [Tue, 1 Oct 2019 10:10:25 +0000 (12:10 +0200)]
patch 8.1.2105: MS-Windows: system() may crash
Problem: MS-Windows: system() may crash.
Solution: Do not use "itmp" when it is NULL. (Yasuhiro Matsumoto,
closes #5005)
Bram Moolenaar [Mon, 30 Sep 2019 21:12:16 +0000 (23:12 +0200)]
patch 8.1.2104: the normal.c file is too big
Problem: The normal.c file is too big.
Solution: Move do_pending_operator() to ops.c. (Yegappan Lakshmanan,
closes #4999).
Bram Moolenaar [Mon, 30 Sep 2019 18:47:54 +0000 (20:47 +0200)]
patch 8.1.2103: wrong error message if "termdebugger" is not executable
Problem: wrong error message if "termdebugger" is not executable.
Solution: Check if "termdebugger" is executable and give a clear error
message. (Ozaki Kiichi, closes #5000) Fix indents.
Bram Moolenaar [Sun, 29 Sep 2019 18:53:55 +0000 (20:53 +0200)]
patch 8.1.2102: can't build with GTK and FEAT_GUI_GNOME
Problem: Can't build with GTK and FEAT_GUI_GNOME. (Tony Mechelynck)
Solution: Adjust the #ifdef. (Yegappan Lakshmanan)
Bram Moolenaar [Sun, 29 Sep 2019 17:02:46 +0000 (19:02 +0200)]
patch 8.1.2101: write_session_file() often defined but not used
Problem: write_session_file() often defined but not used.
Solution: Adjust the #ifdef. (Yegappan Lakshmanan, closes #4998)
Bram Moolenaar [Sun, 29 Sep 2019 12:23:39 +0000 (14:23 +0200)]
patch 8.1.2100: :mksession is not sufficiently tested
Problem: :mksession is not sufficiently tested.
Solution: Add more test cases. (Yegappan Lakshmanan, closes #4993)
Bram Moolenaar [Sat, 28 Sep 2019 20:11:56 +0000 (22:11 +0200)]
patch 8.1.2099: state() test fails on some Mac systems
Problem: state() test fails on some Mac systems.
Solution: Increase the wait time. (closes #4983)
Bram Moolenaar [Sat, 28 Sep 2019 17:29:04 +0000 (19:29 +0200)]
patch 8.1.2098: mksession test fails on MS-Windows
Problem: mksession test fails on MS-Windows.
Solution: Skip testing with backslashes on MS-Windows.
Bram Moolenaar [Sat, 28 Sep 2019 17:08:45 +0000 (19:08 +0200)]
patch 8.1.2097: :mksession is not sufficiently tested
Problem: :mksession is not sufficiently tested.
Solution: Add more test cases. (Yegappan Lakshmanan, closes #4992)
Bram Moolenaar [Sat, 28 Sep 2019 17:05:57 +0000 (19:05 +0200)]
patch 8.1.2096: too many #ifdefs
Problem: Too many #ifdefs.
Solution: Graduate FEAT_COMMENTS.
Bram Moolenaar [Sat, 28 Sep 2019 15:25:10 +0000 (17:25 +0200)]
patch 8.1.2095: leaking memory when getting item from dict
Problem: Leaking memory when getting item from dict.
Solution: Also free the key when not evaluating.
Bram Moolenaar [Sat, 28 Sep 2019 14:30:04 +0000 (16:30 +0200)]
patch 8.1.2094: the fileio.c file is too big
Problem: The fileio.c file is too big.
Solution: Move buf_write() to bufwrite.c. (Yegappan Lakshmanan,
closes #4990)
Bram Moolenaar [Sat, 28 Sep 2019 14:25:00 +0000 (16:25 +0200)]
patch 8.1.2093: MS-Windows: system() test fails
Problem: MS-Windows: system() test fails.
Solution: Expect CR when using systemlist().
Bram Moolenaar [Sat, 28 Sep 2019 13:51:37 +0000 (15:51 +0200)]
patch 8.1.2092: MS-Windows: redirect in system() does not work
Problem: MS-Windows: redirect in system() does not work.
Solution: Handle 'shellxescape' and 'shellxquote' better. (Yasuhiro
Matsumoto, closes #2054)
Bram Moolenaar [Sat, 28 Sep 2019 13:24:00 +0000 (15:24 +0200)]
patch 8.1.2091: double free when memory allocation fails
Problem: Double free when memory allocation fails. (Zu-Ming Jiang)
Solution: Use VIM_CLEAR() instead of vim_free(). (closes #4991)
Bram Moolenaar [Fri, 27 Sep 2019 21:12:45 +0000 (23:12 +0200)]
patch 8.1.2090: not clear why channel log file ends
Problem: Not clear why channel log file ends.
Solution: Add a "closing" line.
Bram Moolenaar [Fri, 27 Sep 2019 19:25:00 +0000 (21:25 +0200)]
patch 8.1.2089: do not get a hint that $TEST_FILTER was active
Problem: Do not get a hint that $TEST_FILTER was active.
Solution: Mention $TEST_FILTER if no functions were executed.
Bram Moolenaar [Fri, 27 Sep 2019 17:35:48 +0000 (19:35 +0200)]
patch 8.1.2088: renamed libvterm mouse.c file not in distributed file list
Problem: Renamed libvterm mouse.c file not in distributed file list.
Solution: Rename the file in the file list.
Bram Moolenaar [Fri, 27 Sep 2019 17:34:08 +0000 (19:34 +0200)]
Update runtime files.
Bram Moolenaar [Fri, 27 Sep 2019 13:34:16 +0000 (15:34 +0200)]
patch 8.1.2087: cannot easily select one test function to execute
Problem: Cannot easily select one test function to execute.
Solution: Support the $TEST_FILTER environment variable. (Ozaki Kiichi,
closes #2695)
Bram Moolenaar [Fri, 27 Sep 2019 12:19:09 +0000 (14:19 +0200)]
patch 8.1.2086: missing a few changes for the renamed files
Problem: Missing a few changes for the renamed files.
Solution: Rename in a few more places. (Ken Takata)
Bram Moolenaar [Fri, 27 Sep 2019 12:14:32 +0000 (14:14 +0200)]
patch 8.1.2085: MS-Windows: draw error moving cursor over double-cell char
Problem: MS-Windows: draw error moving cursor over double-cell character.
Solution: Move the cursor to the left edge if needed. (Nobuhiro Takasaki,
closes #4986)
Bram Moolenaar [Fri, 27 Sep 2019 11:38:56 +0000 (13:38 +0200)]
patch 8.1.2084: Amiga: cannot get the user name
Problem: Amiga: cannot get the user name.
Solution: Use getpwuid() if available. (Ola Söder, closes #4985)
Bram Moolenaar [Fri, 27 Sep 2019 11:32:06 +0000 (13:32 +0200)]
patch 8.1.2083: multi-byte chars do not work properly with "%.*S" in printf()
Problem: Multi-byte chars do not work properly with "%.*S" in printf().
Solution: Use mb_ptr2cells(). Daniel Hahler, closes #4989)
Bram Moolenaar [Fri, 27 Sep 2019 11:08:36 +0000 (13:08 +0200)]
patch 8.1.2082: some files have a weird name to fit in 8.3 characters
Problem: Some files have a weird name to fit in 8.3 characters.
Solution: Use a nicer names.
Bram Moolenaar [Fri, 27 Sep 2019 10:41:56 +0000 (12:41 +0200)]
patch 8.1.2081: the spell.c file is too big
Problem: The spell.c file is too big.
Solution: Move the code for spell suggestions to a separate file. (Yegappan
Lakshmanan, closes #4988)
Bram Moolenaar [Thu, 26 Sep 2019 21:08:54 +0000 (23:08 +0200)]
patch 8.1.2080: the terminal API is limited and can't be disabled
Problem: The terminal API is limited and can't be disabled.
Solution: Add term_setapi() to set the function prefix. (Ozaki Kiichi,
closes #2907)
Bram Moolenaar [Wed, 25 Sep 2019 21:06:40 +0000 (23:06 +0200)]
patch 8.1.2079: popup window test fails without +terminal
Problem: Popup window test fails without +terminal.
Solution: Check for the +terminal feature.
Bram Moolenaar [Wed, 25 Sep 2019 20:45:45 +0000 (22:45 +0200)]
patch 8.1.2078: build error with +textprop but without +terminal
Problem: Build error with +textprop but without +terminal. (Tony Mechelynck)
Solution: Add #ifdef.
Bram Moolenaar [Wed, 25 Sep 2019 20:37:17 +0000 (22:37 +0200)]
patch 8.1.2077: the ops.c file is too big
Problem: The ops.c file is too big.
Solution: Move code for dealing with registers to a new file. (Yegappan
Lakshmanan, closes #4982)
Bram Moolenaar [Wed, 25 Sep 2019 20:14:48 +0000 (22:14 +0200)]
patch 8.1.2076: crash when trying to put a terminal in a popup window
Problem: Crash when trying to put a terminal buffer in a popup window.
Solution: Check for NULL buffer. Do not allow putting a terminal in a popup
window.
Bram Moolenaar [Wed, 25 Sep 2019 19:43:11 +0000 (21:43 +0200)]
patch 8.1.2075: get many log messages when waiting for a typed character
Problem: Get many log messages when waiting for a typed character.
Solution: Do not repeat the repeated messages when nothing happens.
Bram Moolenaar [Wed, 25 Sep 2019 19:16:15 +0000 (21:16 +0200)]
patch 8.1.2074: test for SafeState autocommand is a bit flaky
Problem: Test for SafeState autocommand is a bit flaky.
Solution: Add to list of flaky tests.
Bram Moolenaar [Wed, 25 Sep 2019 18:37:36 +0000 (20:37 +0200)]
patch 8.1.2073: when editing a buffer 'colorcolumn' may not work
Problem: When editing a buffer 'colorcolumn' may not work.
Solution: Set the buffer before copying option values. Call
check_colorcolumn() after copying window options.
Bram Moolenaar [Tue, 24 Sep 2019 20:47:46 +0000 (22:47 +0200)]
patch 8.1.2072: "gk" moves to start of line instead of upwards
Problem: "gk" moves to start of line instead of upwards.
Solution: Fix off-by-one error. (Christian Brabandt, closes #4969)
Bram Moolenaar [Mon, 23 Sep 2019 20:17:15 +0000 (22:17 +0200)]
patch 8.1.2071: when 'wincolor' is set text property changes highlighting
Problem: When 'wincolor' is set text property changes highlighting. (Andy
Stewart)
Solution: Fix combining colors. (closes #4968)
Bram Moolenaar [Mon, 23 Sep 2019 19:16:54 +0000 (21:16 +0200)]
patch 8.1.2070: mouse code is spread out
Problem: Mouse code is spread out.
Solution: Move mouse terminal code parsing to mouse.c. (Yegappan Lakshmanan,
closes #4966)
Bram Moolenaar [Sun, 22 Sep 2019 21:24:13 +0000 (23:24 +0200)]
patch 8.1.2069: test for SafeStateAgain may still fail
Problem: Test for SafeStateAgain may still fail.
Solution: Send another message to trigger SafeStateAgain.
Bram Moolenaar [Sun, 22 Sep 2019 21:03:58 +0000 (23:03 +0200)]
patch 8.1.2068: test for SafeState and SafeStateAgain may fail
Problem: Test for SafeState and SafeStateAgain may fail.
Solution: Accept more possible responses
Bram Moolenaar [Sun, 22 Sep 2019 19:50:09 +0000 (21:50 +0200)]
patch 8.1.2067: no tests for SafeState and SafeStateAgain
Problem: No tests for SafeState and SafeStateAgain.
Solution: Add tests.
Bram Moolenaar [Sun, 22 Sep 2019 19:29:53 +0000 (21:29 +0200)]
patch 8.1.2066: no tests for state()
Problem: No tests for state().
Solution: Add tests. Clean up some feature checks. Make "a" flag work.
Bram Moolenaar [Sun, 22 Sep 2019 12:11:50 +0000 (14:11 +0200)]
patch 8.1.2065: compiler warning building non-GUI with MinGW.
Problem: Compiler warning building non-GUI with MinGW.
Solution: Adjust #ifdefs. (Yegappan Lakshmanan, closes #4964)
Bram Moolenaar [Sat, 21 Sep 2019 21:09:04 +0000 (23:09 +0200)]
patch 8.1.2064: MS-Windows: compiler warnings for unused arguments
Problem: MS-Windows: compiler warnings for unused arguments.
Solution: Add UNUSED. (Yegappan Lakshmanan, closes #4963)
Bram Moolenaar [Sat, 21 Sep 2019 20:57:06 +0000 (22:57 +0200)]
patch 8.1.2063: some tests fail when +balloon_eval_term is missing
Problem: Some tests fail when +balloon_eval_term is missing but
_balloon_eval is present. (Dominique Pelle)
Solution: Check the right feature in the test. (closes #4962)
Bram Moolenaar [Sat, 21 Sep 2019 18:48:04 +0000 (20:48 +0200)]
patch 8.1.2062: the mouse code is spread out
Problem: The mouse code is spread out.
Solution: Move all the mouse code to mouse.c. (Yegappan Lakshmanan,
closes #4959)
Bram Moolenaar [Fri, 20 Sep 2019 15:20:02 +0000 (17:20 +0200)]
patch 8.1.2061: MS-Windows GUI: ":sh" crashes when trying to use a terminal
Problem: MS-Windows GUI: ":sh" crashes when trying to use a terminal.
Solution: Check for a NULL command. (Yasuhiro Matsumoto, closes #4958)
Bram Moolenaar [Fri, 20 Sep 2019 15:00:17 +0000 (17:00 +0200)]
patch 8.1.2060: "precedes" in 'listchars' not used properly
Problem: "precedes" in 'listchars' not used properly.
Solution: Correctly handle the "precedes" char in list mode for long lines.
(Christian Brabandt, closes #4953)
Bram Moolenaar [Fri, 20 Sep 2019 12:38:13 +0000 (14:38 +0200)]
Updte runtime files
Bram Moolenaar [Fri, 20 Sep 2019 11:40:14 +0000 (13:40 +0200)]
patch 8.1.2059: fix for "x" deleting a fold has side effects
Problem: Fix for "x" deleting a fold has side effects.
Solution: Fix it where the fold is included.
Bram Moolenaar [Thu, 19 Sep 2019 21:21:55 +0000 (23:21 +0200)]
patch 8.1.2058: function for ex command is named inconsistently
Problem: Function for ex command is named inconsistently.
Solution: Rename do_marks() to ex_marks().
Bram Moolenaar [Thu, 19 Sep 2019 21:06:20 +0000 (23:06 +0200)]
patch 8.1.2057: the screen.c file is much too big
Problem: The screen.c file is much too big.
Solution: Split it in three parts. (Yegappan Lakshmanan, closes #4943)
Bram Moolenaar [Wed, 18 Sep 2019 20:14:43 +0000 (22:14 +0200)]
patch 8.1.2056: "make test" for indent files doesn't cause make to fail
Problem: "make test" for indent files doesn't cause make to fail.
Solution: Exit the script with ":cquit". (Daniel Hahler, closes #4949)
Bram Moolenaar [Wed, 18 Sep 2019 20:04:56 +0000 (22:04 +0200)]
patch 8.1.2055: not easy to jump to function line from profile
Problem: Not easy to jump to function line from profile.
Solution: Use "file:99" instead of "file line 99" so that "gf" works.
(Daniel Hahler, closes #4951)
Bram Moolenaar [Wed, 18 Sep 2019 19:42:38 +0000 (21:42 +0200)]
patch 8.1.2054: compiler test for Perl may fail
Problem: Compiler test for Perl may fail.
Solution: Accept any error line number. (James McCoy, closes #4944)
Bram Moolenaar [Wed, 18 Sep 2019 19:15:31 +0000 (21:15 +0200)]
patch 8.1.2053: SafeStateAgain not triggered if callback uses feedkeys()
Problem: SafeStateAgain not triggered if callback uses feedkeys().
Solution: Check for safe state in the input loop. Make log messages easier
to find. Add 'S' flag to state().
Bram Moolenaar [Tue, 17 Sep 2019 20:42:55 +0000 (22:42 +0200)]
patch 8.1.2052: using "x" before a closed fold may delete that fold
Problem: Using "x" before a closed fold may delete that fold.
Solution: Do not translate 'x' do "dl". (Christian Brabandt, closes #4927)