When git-merge updates HEAD as a result of a merge record what
happened during the merge into the reflog associated with HEAD
(if any). The log reports who caused the update (git-merge or
git-pull, by invoking git-merge), what the remote ref names were
and the type of merge process used.
The merge information can be useful when reviewing a reflog for
a branch such as `master` where fast forward and trivial in index
merges might be common as the user tracks an upstream.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Eric Wong [Tue, 11 Jul 2006 19:01:54 +0000 (12:01 -0700)]
tests: Set EDITOR=: and VISUAL=: globally
This way we don't have to remember to set it for each test; and
if we forget, we won't cause interactive editors to be spawned
for non-interactive tests.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
When git-fetch updates a reference record in the associated reflog
what type of update took place and who caused it (git-fetch or
git-pull, by invoking git-fetch).
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Record the type of commit operation in the reflog.
If committing a merge (.git/MERGE_HEAD exists), an initial tree
(no HEAD) or using --amend to amend the prior commit then denote
the subtype of commit in the reflog. This helps to distinguish
amended or merge commits from normal commits.
In the case of --amend the prior sha1 is probably the commit which
is being thrown away in favor of the new commit. Since it is likely
that the old commit doesn't have any ref pointing to it anymore
it can be interesting to know why that the commit was replaced
and orphaned.
In the case of a merge the prior sha1 is probably the first parent
of the new merge commit. Consequently having its prior sha1 in the
reflog is slightly less interesting but its still informative to
know the commit was the result of a merge which had to be completed
by hand.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Allow user.name and user.email to drive reflog entry.
Apparently calling setup_ident() after git_config causes the
user.name and user.email values read from the config file to be
replaced with the data obtained from the host. This means that
users who have setup their email address in user.email will instead
be writing reflog entries with their hostname.
Moving setup_ident() to before git_config in update-ref resolves
this ordering problem.
Signed-off-by: Shawn O. Pearce <spearce@spearce.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
On one of my systems, the linker is not intelligent enough to link with
pager.o (in libgit.a) when only the variable pager_in_use is needed. The
consequence is that the linker complains about an undefined variable. So,
put the variable into environment.o, where it is linked always.
Signed-off-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
Pavel Roskin [Mon, 10 Jul 2006 06:57:51 +0000 (02:57 -0400)]
Avoid C99 comments, use old-style C comments instead.
This doesn't make the code uglier or harder to read, yet it makes the
code more portable. This also simplifies checking for other potential
incompatibilities. "gcc -std=c89 -pedantic" can flag many incompatible
constructs as warnings, but C99 comments will cause it to emit an error.
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Pavel Roskin [Mon, 10 Jul 2006 05:50:18 +0000 (01:50 -0400)]
Fix more typos, primarily in the code
The only visible change is that git-blame doesn't understand
"--compability" anymore, but it does accept "--compatibility" instead,
which is already documented.
Signed-off-by: Pavel Roskin <proski@gnu.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
gitweb.cgi: Teach "a=blob" action to know the blob/file mime type
Now action "blob" knows the file type: if the file type is
not "text/*" then action "blob" defaults to "blob_plain",
i.e. the file is downloaded raw for the browser to interpret.
If the file type is "text/*", then "blob" defaults to the
current "cat -n"-like output, from which you can click
"plain", to get the "blob_plain" output.
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 10 Jul 2006 06:47:39 +0000 (23:47 -0700)]
Merge branch 'ew/diff'
* ew/diff:
templates/hooks--update: replace diffstat calls with git diff --stat
diff: do not use configuration magic at the core-level
Update diff-options and config documentation.
diff.c: --no-color to defeat diff.color configuration.
diff.c: respect diff.renames config option
Junio C Hamano [Mon, 10 Jul 2006 06:37:19 +0000 (23:37 -0700)]
Merge branch 'ew/svn'
* ew/svn:
Fix some doubled word typos
Typofix in Makefile comment.
Makefile: export NO_SVN_TESTS
git-svn: migrate out of contrib (follow-up)
git-svn: migrate out of contrib
Add "raw" output option to blobs in "tree" view format
Add a "raw" output option to blobs in "tree" view format, so that the
user doesn't have to click on "blob", wait for the (binary) file to be
uploaded and shown in "blob" mode, and then click on "plain" to
download the (binary) file.
This is useful when the file is clearly binary and we don't want the
browser to upload and display it in "blob" mode, but we just want to
download it. Case in point: pdf files, wlg.
Note: the "raw" format is equivalent to the blob->plain view, not
blob->head view. I.e. the view has the hash of the file as listed
by git-ls-tree, not just "HEAD".
Signed-off-by: Luben Tuikov <ltuikov@yahoo.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sat, 8 Jul 2006 08:05:16 +0000 (01:05 -0700)]
diff: do not use configuration magic at the core-level
The Porcelainish has become so much usable as the UI that there
is not much reason people should be using the core programs by
hand anymore. At this point we are better off making the
behaviour of the core programs predictable by keeping them
unaffected by the configuration variables. Otherwise they will
become very hard to use as reliable building blocks.
For example, "git-commit -a" internally uses git-diff-files to
figure out the set of paths that need to be updated in the
index, and we should never allow diff.renames that happens to be
in the configuration to interfere (or slow down the process).
The UI level configuration such as showing renamed diff and
coloring are still honored by the Porcelainish ("git log" family
and "git diff"), but not by the core anymore.
Junio C Hamano [Sat, 8 Jul 2006 00:48:02 +0000 (17:48 -0700)]
colored diff: diff.color = auto fix
Even if the standard output is connected to a tty, do not
colorize the diff if we are talking to a dumb terminal when
diff.color configuration variable is set to "auto".
Eric Wong [Thu, 6 Jul 2006 07:14:16 +0000 (00:14 -0700)]
git-svn: migrate out of contrib
Allow NO_SVN_TESTS to be defined to skip git-svn tests. These
tests are time-consuming due to SVN being slow, and even more so
if SVN Perl libraries are not available.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Fri, 7 Jul 2006 00:01:00 +0000 (17:01 -0700)]
Merge branch 'ew/instaweb'
* ew/instaweb:
instaweb: fix unportable ';' usage in sed
Makefile: replace ugly and unportable sed invocation
Add git-instaweb, instantly browse the working repo with gitweb
gitweb: Declare global variables with "our"
gitweb: Enable tree (directory) history display
gitweb: optimize per-file history generation
Junio C Hamano [Wed, 5 Jul 2006 21:17:49 +0000 (14:17 -0700)]
mailinfo: assume input is latin-1 on the header as we do for the body
When the input mbox does not identify what encoding it is in,
and already have RFC2047 stripped away, we cannot tell what
encoding the header text is in. For body text, when the message
does not say what charset it is in, we fall back to assume
latin-1 input when converting to utf8. This should be done
consistently to the header as well.
Junio C Hamano [Thu, 6 Jul 2006 02:44:03 +0000 (19:44 -0700)]
git-reset: complain and exit upon seeing an unknown parameter.
The check to use "rev-parse --verify" was defeated by the use of
"--default HEAD". "git reset --hard bogus-committish" just
defaulted to reset to the HEAD without complaining.
Junio C Hamano [Fri, 30 Jun 2006 10:04:05 +0000 (03:04 -0700)]
git-grep: boolean expression on pattern matching.
This extends the behaviour of git-grep when multiple -e options
are given. So far, we allowed multiple -e to behave just like
regular grep with multiple -e, i.e. the patterns are OR'ed
together.
With this change, you can also have multiple patterns AND'ed
together, or form boolean expressions, like this (the
parentheses are quoted from the shell in this example):
Junio C Hamano [Wed, 5 Jul 2006 23:36:25 +0000 (16:36 -0700)]
Merge branch 'jc/sha1'
* jc/sha1:
A better-scheduled PPC SHA-1 implementation.
test-sha1: test hashing large buffer
Makefile: add framework to verify and bench sha1 implementations.
Junio C Hamano [Wed, 5 Jul 2006 23:31:24 +0000 (16:31 -0700)]
Merge branch 'th/diff'
* th/diff:
builtin-diff: turn recursive on when defaulting to --patch format.
t4013: note improvements brought by the new output code.
t4013: add format-patch tests.
format-patch: fix diff format option implementation
combine-diff.c: type sanity.
t4013 test updates for new output code.
Fix some more diff options changes.
Fix diff-tree -s
log --raw: Don't descend into subdirectories by default
diff-tree: Use ---\n as a message separator
Print empty line between raw, stat, summary and patch
t4013: add more tests around -c and --cc
whatchanged: Default to DIFF_FORMAT_RAW
Don't xcalloc() struct diffstat_t
Add msg_sep to diff_options
DIFF_FORMAT_RAW is not default anymore
Set default diff output format after parsing command line
Make --raw option available for all diff commands
Merge with_raw, with_stat and summary variables to output_format
t4013: add tests for diff/log family output options.
Junio C Hamano [Wed, 5 Jul 2006 23:25:32 +0000 (16:25 -0700)]
Merge branch 'jc/grepfix'
* jc/grepfix:
git-grep: use a bit more specific error messages.
git-grep: fix exit code when we use external grep.
git-grep: fix parsing of pathspec separator '--'
Eric Wong [Wed, 5 Jul 2006 12:14:00 +0000 (05:14 -0700)]
git-svn: avoid fetching files outside of the URL we're tracking
Thanks to Santi <sbejar@gmail.com> for the bug report and explanation:
> /path/to/repository/project/file
> /path/to/repository/project-2/file
<...>
> you end up with a project with the following files:
>
> file
> -2/file
This makes git-peek-remote able to basically do everything that
git-ls-remote does (but obviously just for the native protocol, so no
http[s]: or rsync: support).
The default behaviour is the same, but you can now give a mixture of
"--refs", "--tags" and "--heads" flags, where "--refs" forces
git-peek-remote to only show real refs (ie none of the fakey tag lookups,
but also not the special pseudo-refs like HEAD and MERGE_HEAD).
The "--tags" and "--heads" flags respectively limit the output to just
regular tags and heads, of course.
You can still also ask to limit them by name too.
You can combine the flags, so
git peek-remote --refs --tags .
will show all local _true_ tags, without the generated tag lookups
(compare the output without the "--refs" flag).
And "--tags --heads" will show both tags and heads, but will avoid (for
example) any special refs outside of the standard locations.
I'm also planning on adding a "--ignore-local" flag that allows us to ask
it to ignore any refs that we already have in the local tree, but that's
an independent thing.
All this is obviously gearing up to making "git fetch" cheaper.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Johannes noticed the missing call to free_commit_list() in the
patch from Santi to add ... support to rev-parse. Turns out I
forgot it too in rev-list. This patch is against the next branch
(3b1d06a).
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Sun, 2 Jul 2006 23:03:59 +0000 (16:03 -0700)]
send-email: do not barf when Term::ReadLine does not like your terminal
As long as we do not need to readline from the terminal, we
should not barf when starting up the program. Without this
patch, t9001 test on Cygwin occasionally died with the following
error message:
Unable to get Terminal Size. The TIOCGWINSZ ioctl didn't work. The COLUMNS and LINES environment variables didn't work. The resize program didn't work. at /usr/lib/perl5/vendor_perl/5.8/cygwin/Term/ReadKey.pm line 362.
Compilation failed in require at /usr/lib/perl5/vendor_perl/5.8/Term/ReadLine/Perl.pm line 58.
Acked-by: Ryan Anderson <ryan@michonline.com> Signed-off-by: Junio C Hamano <junkio@cox.net>
Ryan Anderson [Tue, 4 Jul 2006 01:30:01 +0000 (21:30 -0400)]
annotate: Support annotation of files on other revisions.
This is a bug fix, and cleans up one or two other things spotted during the
course of tracking down the main bug here.
Also, the test-suite is updated to reflect this case.
Signed-off-by: Ryan Anderson <ryan@michonline.com>
(cherry picked from 2f7554b4db3ab2c2d3866b160245c91c9236fc9a commit) Signed-off-by: Junio C Hamano <junkio@cox.net>
Joachim B Haga [Mon, 3 Jul 2006 20:11:47 +0000 (22:11 +0200)]
Make zlib compression level configurable, and change default.
With the change in default, "git add ." on kernel dir is about
twice as fast as before, with only minimal (0.5%) change in
object size. The speed difference is even more noticeable
when committing large files, which is now up to 8 times faster.
The configurability is through setting core.compression = [-1..9]
which maps to the zlib constants; -1 is the default, 0 is no
compression, and 1..9 are various speed/size tradeoffs, 9
being slowest.
Signed-off-by: Joachim B Haga (cjhaga@fys.uio.no) Acked-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
Junio C Hamano [Mon, 3 Jul 2006 10:05:20 +0000 (03:05 -0700)]
revert clear-commit-marks for now.
Earlier change broke "git describe A B" among other things.
Revert it for now, and clean the commits smudged by
get_merge_bases using clear_object_marks() function. For
complex commit ancestry graph, this is way cheaper as well.
Although our "git-%$X:" implicit target had dependency on
$(GITLIBS) which included xdiff/lib.a, git-http-{fetch,push} had
their own building rules and with an obsolete dependency on
$(LIB_FILES). Update the rules to depend on $(GITLIBS), to make
parallel build work correctly.
Eric Wong [Sun, 2 Jul 2006 11:56:16 +0000 (04:56 -0700)]
instaweb: fix unportable ';' usage in sed
Hint taken from Johannes. I've tested this with sed --posix on
my system with GNU sed and it works fine with and also without
it. Further portability testing/review would be good.
Signed-off-by: Eric Wong <normalperson@yhbt.net> Signed-off-by: Junio C Hamano <junkio@cox.net>
Fold get_merge_bases_clean() into get_merge_bases()
Change get_merge_bases() to be able to clean up after itself if
needed by adding a cleanup parameter.
We don't need to save the flags and restore them afterwards anymore;
that was a leftover from before the flags were moved out of the
range used in revision.c. clear_commit_marks() sets them to zero,
which is enough.
Signed-off-by: Rene Scharfe <rene.scharfe@lsrfire.ath.cx> Acked-by: Johannes Schindelin <Johannes.Schindelin@gmx.de> Signed-off-by: Junio C Hamano <junkio@cox.net>
It had the wrong test for whether a commit was a merge. What it did was to
say that a non-merge has exactly one parent (which sounds almost right),
but the fact is, initial trees have no parent at all, but they're
obviously not merges.
Signed-off-by: Linus Torvalds <torvalds@osdl.org> Signed-off-by: Junio C Hamano <junkio@cox.net>
projects / git / log