A previous commit made libLLVMDebugInfoDWARF depend on the LLVM_Bitcode module which depends on the LLVM_intrinsic_gen module which depends on "llvm/IR/Attributes.inc" which is a generated header not depended on by libLLVMDebugInfo. Add that dependency.
Joel E. Denny [Mon, 14 Oct 2019 19:59:30 +0000 (19:59 +0000)]
[lit] Extend internal diff to support -U
When using lit's internal shell, RUN lines like the following
accidentally execute an external `diff` instead of lit's internal
`diff`:
```
# RUN: program | diff -U1 file -
```
Such cases exist now, in `clang/test/Analysis` for example. We are
preparing patches to ensure lit's internal `diff` is called in such
cases, which will then fail because lit's internal `diff` doesn't
recognize `-U` as a command-line option. This patch adds `-U`
support.
Philip Reames [Mon, 14 Oct 2019 19:49:40 +0000 (19:49 +0000)]
[Tests] Add a test demonstrating a miscompile in the off-by-default loop-pred transform
Credit goes to Evgeny Brevnov for figuring out the problematic case.
Fuzzing probably also found it (lots of failures), but due to some silly infrastructure problems I hadn't gotten to the results before Evgeny hand reduced it from a benchmark.
Roman Lebedev [Mon, 14 Oct 2019 19:46:34 +0000 (19:46 +0000)]
[LoopIdiom] BCmp: loop exit count must not be wider than size_t that `bcmp` takes
As reported by Joerg Sonnenberger in IRC, for 32-bit systems,
where pointer and size_t are 32-bit, if you use 64-bit-wide variable
in the loop, you could end up with loop exit count being of the type
wider than the size_t. Now, i'm not sure if we can produce `bcmp`
from that (just truncate?), but we certainly should not assert/miscompile.
Jordan Rupprecht [Mon, 14 Oct 2019 17:47:17 +0000 (17:47 +0000)]
[llvm-objdump] Adjust spacing and field width for --section-headers
Summary:
- Expand the "Name" column past 13 characters when any of the section names are longer. Current behavior is a staggard output instead of a nice table if a single name is longer.
- Only print the required number of hex chars for addresses (i.e. 8 characters for 32-bit, 16 characters for 64-bit)
- Fix trailing spaces
Vedant Kumar [Mon, 14 Oct 2019 17:20:22 +0000 (17:20 +0000)]
[llvm-profdata] Weaken "malformed-ptr-to-counter-array.test" to appease arm bots
There are a number arm bots failing after r374617 landed, and I'm not
sure why. It looks a bit like the error message llvm-profdata is
expected to print to stderr isn't flushed.
Weaken the test in an attempt to appease the arm bots: if this doesn't
work, that means that llvm-profdata is actually *not failing*, and that
will be a clear indication that some logic error is actually happening.
Simon Pilgrim [Mon, 14 Oct 2019 16:30:17 +0000 (16:30 +0000)]
[CostModel][X86] Add CTLZ scalar costs
Add specific scalar costs for CTLZ instructions, we can't discriminate between CTLZ and CTLZ_ZERO_UNDEF so we have to assume the worst. Given how BSR is often a microcoded nightmare on some older targets we might still be underestimating it.
For targets supporting LZCNT (Intel Haswell+ or AMD Fam10+), we provide overrides that assume 1cy costs.
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
David Green [Mon, 14 Oct 2019 15:19:33 +0000 (15:19 +0000)]
[ARM] Selection for MVE VMOVN
The adds both VMOVNt and VMOVNb instruction selection from the appropriate
shuffles. We detect shuffle masks of the form:
0, N, 2, N+2, 4, N+4, ...
or
0, N+1, 2, N+3, 4, N+5, ...
ISel will also try the opposite patterns, with inputs reversed. These are
selected to VMOVNt and VMOVNb respectively.
Makes Object/macho-invalid.test fail everywhere, e.g. here:
http://lab.llvm.org:8011/builders/llvm-hexagon-elf/builds/23669/steps/test-llvm/logs/FAIL%3A%20LLVM%3A%3Amacho-invalid.test
[Alignment][NFC] Move and type functions from MathExtras to Alignment
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
[AMDGPU] Come back patch for the 'Assign register class for cross block values according to the divergence.'
Detailed description:
After https://reviews.llvm.org/D59990 submit several issues were discovered.
Changes in common code were preserved but AMDGPU specific part was reverted to keep the backend working correctly.
Discovered issues were addressed in the following commits:
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Craig Topper [Mon, 14 Oct 2019 06:47:56 +0000 (06:47 +0000)]
[X86] Teach EmitTest to handle ISD::SSUBO/USUBO in order to use the Z flag from the subtract directly during isel.
This prevents isel from emitting a TEST instruction that
optimizeCompareInstr will need to remove later.
In some of the modified tests, the SUB gets duplicated due to
the flags being needed in two places and being clobbered in
between. optimizeCompareInstr was able to optimize away the TEST
that was using the result of one of them, but optimizeCompareInstr
doesn't know to turn SUB into CMP after removing the TEST. It
only knows how to turn SUB into CMP if the result was already
dead.
With this change the TEST never exists, so optimizeCompareInstr
doesn't have to remove it. Then it can just turn the SUB into
CMP immediately.
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
[Attributor] Shortcut no-return through will-return
No-return and will-return are exclusive, assuming the latter is more
prominent we can avoid updates of the former unless will-return is not
known for sure.
[Attributor][MemBehavior] Fallback to the function state for arguments
Even if an argument is captured, we cannot have an effect the function
does not have. This is fine except for the special case of `inalloca` as
it does not behave by the rules.
TODO: Maybe the special rule for `inalloca` is wrong after all.
Simon Pilgrim [Sun, 13 Oct 2019 19:35:35 +0000 (19:35 +0000)]
[X86] getTargetShuffleInputs - Control KnownUndef mask element resolution as well as KnownZero.
We were already controlling whether the KnownZero elements were being written to the target mask, this extends it to the KnownUndef elements as well so we can prevent the target shuffle mask being manipulated at all.
Craig Topper [Sun, 13 Oct 2019 19:07:28 +0000 (19:07 +0000)]
[X86] Enable use of avx512 saturating truncate instructions in more cases.
This enables use of the saturating truncate instructions when the
result type is less than 128 bits. It also enables the use of
saturating truncate instructions on KNL when the input is less
than 512 bits. We can do this by widening the input and then
extracting the result.
Roman Lebedev [Sun, 13 Oct 2019 17:11:16 +0000 (17:11 +0000)]
[NFC][InstCombine] More test for "sign bit test via shifts" pattern (PR43595)
While that pattern is indirectly handled via
reassociateShiftAmtsOfTwoSameDirectionShifts(),
that incursme one-use restriction on truncation,
which is pointless since we know that we'll produce a single instruction.
Additionally, *if* we are only looking for sign bit,
we don't need shifts to be identical,
which isn't the case in general,
and is the blocker for me in bug in question:
The CmpInst::getType() calls can be replaced by just using User::getType() that it was dyn_cast from, and we then need to assert that any default predicate cases came from the CmpInst.
Craig Topper [Sun, 13 Oct 2019 06:48:05 +0000 (06:48 +0000)]
[X86] Add a one use check on the setcc to the min/max canonicalization code in combineSelect.
This seems to improve std::midpoint code where we have a min and
a max with the same condition. If we split the setcc we can end
up with two compares if the one of the operands is a constant.
Since we aggressively canonicalize compares with constants.
For non-constants it can interfere with our ability to share
control flow if we need to expand cmovs into control flow.
I'm also not sure I understand this min/max canonicalization code.
The motivating case talks about comparing with 0. But we don't
check for 0 explicitly.
Removes one instruction from the codegen for PR43658.
[Attributor][FIX] Ensure h2s doesn't trigger on escaped pointers
We do not yet perform h2s because we know something is free'ed but we do
it because we know the pointer does not escape. Storing the pointer
allows it to escape so we have to prevent that.
[Attributor][FIX] Do not apply h2s for arbitrary mallocs
H2S did apply to mallocs of non-constant sizes if the uses were OK. This
is now forbidden through reording of the "good" and "bad" cases in the
conditional.
The check for naked/optnone was insufficient for different reasons. We
now check before we initialize an abstract attribute and we do it for
all abstract attributes.
[SROA] Reuse existing lifetime markers if possible
Summary:
If the underlying alloca did not change, we do not necessarily need new
lifetime markers. This patch adds a check and reuses the old ones if
possible.
Joel E. Denny [Sat, 12 Oct 2019 16:00:35 +0000 (16:00 +0000)]
[lit] Try yet again to fix new tests that fail on Windows bots
I seem to have misread the bot logs on my last attempt. When lit's
internal diff runs on Windows under Python 2.7, it's text diffs not
binary diffs that need decoding to avoid this error when writing the
diff to stdout:
```
UnicodeEncodeError: 'ascii' codec can't encode characters in position 7-8: ordinal not in range(128)
```
There is no `decode` attribute in this case under Python 3.6.8 under
Ubuntu, so this patch checks for the `decode` attribute before using
it here. Hopefully nothing else is needed when `decode` isn't
available.
It might take a couple more attempts to figure out what error
handling, if any, is needed for this decoding.
Summary:
This is a recommit, this originally landed in rL370454 but was
subsequently reverted in rL370788 due to
https://bugs.llvm.org/show_bug.cgi?id=43206
The reduced testcase was added to bcmp-negative-tests.ll
as @pr43206_different_loops - we must ensure that the SCEV's
we got are both for the same loop we are currently investigating.
Original commit message:
@mclow.lists brought up this issue up in IRC.
It is a reasonably common problem to compare some two values for equality.
Those may be just some integers, strings or arrays of integers.
In C, there is `memcmp()`, `bcmp()` functions.
In C++, there exists `std::equal()` algorithm.
One can also write that function manually.
libstdc++'s `std::equal()` is specialized to directly call `memcmp()` for
various types, but not `std::byte` from C++2a. https://godbolt.org/z/mx2ejJ
libc++ does not do anything like that, it simply relies on simple C++'s
`operator==()`. https://godbolt.org/z/er0Zwf (GOOD!)
So likely, there exists a certain performance opportunities.
Let's compare performance of naive `std::equal()` (no `memcmp()`) with one that
is using `memcmp()` (in this case, compiled with modified compiler). {F8768213}
template <typename T>
static void CustomArguments(benchmark::internal::Benchmark* b) {
const size_t L2SizeBytes = []() {
for (const benchmark::CPUInfo::CacheInfo& I :
benchmark::CPUInfo::Get().caches) {
if (I.level == 2) return I.size;
}
return 0;
}();
// What is the largest range we can check to always fit within given L2 cache?
const size_t MaxLen = L2SizeBytes / /*total bufs*/ 2 /
/*maximal elt size*/ sizeof(T) / /*safety margin*/ 2;
b->RangeMultiplier(2)->Range(1, MaxLen)->Complexity(benchmark::oN);
}
BENCHMARK_TEMPLATE(BM_bcmp, uint8_t, InequalHalfway)
->Apply(CustomArguments<uint8_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint16_t, InequalHalfway)
->Apply(CustomArguments<uint16_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint32_t, InequalHalfway)
->Apply(CustomArguments<uint32_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint64_t, InequalHalfway)
->Apply(CustomArguments<uint64_t>);
```
{F8768210}
```
$ ~/src/googlebenchmark/tools/compare.py --no-utest benchmarks build-{old,new}/test/llvm-bcmp-bench
RUNNING: build-old/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpb6PEUx
2019-04-25 21:17:11
Running build-old/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 0.65, 3.90, 4.14
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 432131 ns 432101 ns 1613 bytes_read/iteration=1000k bytes_read/sec=2.20706G/s eltcnt=825.856M eltcnt/sec=1.18491G/s
BM_bcmp<uint8_t, Identical>_BigO 0.86 N 0.86 N
BM_bcmp<uint8_t, Identical>_RMS 8 % 8 %
<...>
BM_bcmp<uint16_t, Identical>/256000 161408 ns 161409 ns 4027 bytes_read/iteration=1000k bytes_read/sec=5.90843G/s eltcnt=1030.91M eltcnt/sec=1.58603G/s
BM_bcmp<uint16_t, Identical>_BigO 0.67 N 0.67 N
BM_bcmp<uint16_t, Identical>_RMS 25 % 25 %
<...>
BM_bcmp<uint32_t, Identical>/128000 81497 ns 81488 ns 8415 bytes_read/iteration=1000k bytes_read/sec=11.7032G/s eltcnt=1077.12M eltcnt/sec=1.57078G/s
BM_bcmp<uint32_t, Identical>_BigO 0.71 N 0.71 N
BM_bcmp<uint32_t, Identical>_RMS 42 % 42 %
<...>
BM_bcmp<uint64_t, Identical>/64000 50138 ns 50138 ns 10909 bytes_read/iteration=1000k bytes_read/sec=19.0209G/s eltcnt=698.176M eltcnt/sec=1.27647G/s
BM_bcmp<uint64_t, Identical>_BigO 0.84 N 0.84 N
BM_bcmp<uint64_t, Identical>_RMS 27 % 27 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 192405 ns 192392 ns 3638 bytes_read/iteration=1000k bytes_read/sec=4.95694G/s eltcnt=1.86266G eltcnt/sec=2.66124G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.38 N 0.38 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 3 % 3 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 127858 ns 127860 ns 5477 bytes_read/iteration=1000k bytes_read/sec=7.45873G/s eltcnt=1.40211G eltcnt/sec=2.00219G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 0 % 0 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 49140 ns 49140 ns 14281 bytes_read/iteration=1000k bytes_read/sec=19.4072G/s eltcnt=1.82797G eltcnt/sec=2.60478G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.40 N 0.40 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 18 % 18 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 32101 ns 32099 ns 21786 bytes_read/iteration=1000k bytes_read/sec=29.7101G/s eltcnt=1.3943G eltcnt/sec=1.99381G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 1 % 1 %
RUNNING: build-new/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpQ46PP0
2019-04-25 21:19:29
Running build-new/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 1.01, 2.85, 3.71
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 18593 ns 18590 ns 37565 bytes_read/iteration=1000k bytes_read/sec=51.2991G/s eltcnt=19.2333G eltcnt/sec=27.541G/s
BM_bcmp<uint8_t, Identical>_BigO 0.04 N 0.04 N
BM_bcmp<uint8_t, Identical>_RMS 37 % 37 %
<...>
BM_bcmp<uint16_t, Identical>/256000 18950 ns 18948 ns 37223 bytes_read/iteration=1000k bytes_read/sec=50.3324G/s eltcnt=9.52909G eltcnt/sec=13.511G/s
BM_bcmp<uint16_t, Identical>_BigO 0.08 N 0.08 N
BM_bcmp<uint16_t, Identical>_RMS 34 % 34 %
<...>
BM_bcmp<uint32_t, Identical>/128000 18627 ns 18627 ns 37895 bytes_read/iteration=1000k bytes_read/sec=51.198G/s eltcnt=4.85056G eltcnt/sec=6.87168G/s
BM_bcmp<uint32_t, Identical>_BigO 0.16 N 0.16 N
BM_bcmp<uint32_t, Identical>_RMS 35 % 35 %
<...>
BM_bcmp<uint64_t, Identical>/64000 18855 ns 18855 ns 37458 bytes_read/iteration=1000k bytes_read/sec=50.5791G/s eltcnt=2.39731G eltcnt/sec=3.3943G/s
BM_bcmp<uint64_t, Identical>_BigO 0.32 N 0.32 N
BM_bcmp<uint64_t, Identical>_RMS 33 % 33 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 9570 ns 9569 ns 73500 bytes_read/iteration=1000k bytes_read/sec=99.6601G/s eltcnt=37.632G eltcnt/sec=53.5046G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.02 N 0.02 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 9547 ns 9547 ns 74343 bytes_read/iteration=1000k bytes_read/sec=99.8971G/s eltcnt=19.0318G eltcnt/sec=26.8159G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.04 N 0.04 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 9396 ns 9394 ns 73521 bytes_read/iteration=1000k bytes_read/sec=101.518G/s eltcnt=9.41069G eltcnt/sec=13.6255G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.08 N 0.08 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 30 % 30 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 9499 ns 9498 ns 73802 bytes_read/iteration=1000k bytes_read/sec=100.405G/s eltcnt=4.72333G eltcnt/sec=6.73808G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.16 N 0.16 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 28 % 28 %
Comparing build-old/test/llvm-bcmp-bench to build-new/test/llvm-bcmp-bench
Benchmark Time CPU Time Old Time New CPU Old CPU New
---------------------------------------------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 -0.9570 -0.9570 432131 18593 432101 18590
<...>
BM_bcmp<uint16_t, Identical>/256000 -0.8826 -0.8826 161408 18950 161409 18948
<...>
BM_bcmp<uint32_t, Identical>/128000 -0.7714 -0.7714 81497 18627 81488 18627
<...>
BM_bcmp<uint64_t, Identical>/64000 -0.6239 -0.6239 50138 18855 50138 18855
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 -0.9503 -0.9503 192405 9570 192392 9569
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 -0.9253 -0.9253 127858 9547 127860 9547
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 -0.8088 -0.8088 49140 9396 49140 9394
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 -0.7041 -0.7041 32101 9499 32099 9498
```
What can we tell from the benchmark?
* Performance of naive equality check somewhat improves with element size,
maxing out at eltcnt/sec=1.58603G/s for uint16_t, or bytes_read/sec=19.0209G/s
for uint64_t. I think, that instability implies performance problems.
* Performance of `memcmp()`-aware benchmark always maxes out at around
bytes_read/sec=51.2991G/s for every type. That is 2.6x the throughput of the
naive variant!
* eltcnt/sec metric for the `memcmp()`-aware benchmark maxes out at
eltcnt/sec=27.541G/s for uint8_t (was: eltcnt/sec=1.18491G/s, so 24x) and
linearly decreases with element size.
For uint64_t, it's ~4x+ the elements/second.
* The call obvious is more pricey than the loop, with small element count.
As it can be seen from the full output {F8768210}, the `memcmp()` is almost
universally worse, independent of the element size (and thus buffer size) when
element count is less than 8.
So all in all, bcmp idiom does indeed pose untapped performance headroom.
This diff does implement said idiom recognition. I think a reasonable test
coverage is present, but do tell if there is anything obvious missing.
Now, quality. This does succeed to build and pass the test-suite, at least
without any non-bundled elements. {F8768216} {F8768217}
This transform fires 91 times:
```
$ /build/test-suite/utils/compare.py -m loop-idiom.NumBCmp result-new.json
Tests: 1149
Metric: loop-idiom.NumBCmp
Program result-new
MultiSourc...Benchmarks/7zip/7zip-benchmark 79.00
MultiSource/Applications/d/make_dparser 3.00
SingleSource/UnitTests/vla 2.00
MultiSource/Applications/Burg/burg 1.00
MultiSourc.../Applications/JM/lencod/lencod 1.00
MultiSource/Applications/lemon/lemon 1.00
MultiSource/Benchmarks/Bullet/bullet 1.00
MultiSourc...e/Benchmarks/MallocBench/gs/gs 1.00
MultiSourc...gs-C/TimberWolfMC/timberwolfmc 1.00
MultiSourc...Prolangs-C/simulator/simulator 1.00
```
The size changes are:
I'm not sure what's going on with SingleSource/UnitTests/vla.test yet, did not look.
```
$ /build/test-suite/utils/compare.py -m size..text result-{old,new}.json --filter-hash
Tests: 1149
Same hash: 907 (filtered out)
Remaining: 242
Metric: size..text
Program result-old result-new diff
test-suite...ingleSource/UnitTests/vla.test 753.00 833.00 10.6%
test-suite...marks/7zip/7zip-benchmark.test 1001697.00 966657.00 -3.5%
test-suite...ngs-C/simulator/simulator.test 32369.00 32321.00 -0.1%
test-suite...plications/d/make_dparser.test 89585.00 89505.00 -0.1%
test-suite...ce/Applications/Burg/burg.test 40817.00 40785.00 -0.1%
test-suite.../Applications/lemon/lemon.test 47281.00 47249.00 -0.1%
test-suite...TimberWolfMC/timberwolfmc.test 250065.00 250113.00 0.0%
test-suite...chmarks/MallocBench/gs/gs.test 149889.00 149873.00 -0.0%
test-suite...ications/JM/lencod/lencod.test 769585.00 769569.00 -0.0%
test-suite.../Benchmarks/Bullet/bullet.test 770049.00 770049.00 0.0%
test-suite...HMARK_ANISTROPIC_DIFFUSION/128 NaN NaN nan%
test-suite...HMARK_ANISTROPIC_DIFFUSION/256 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/64 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/32 NaN NaN nan%
test-suite...ENCHMARK_BILATERAL_FILTER/64/4 NaN NaN nan%
Geomean difference nan%
result-old result-new diff
count 1.000000e+01 10.00000 10.000000
mean 3.152090e+05 311695.40000 0.006749
std 3.790398e+05 372091.42232 0.036605
min 7.530000e+02 833.00000 -0.034981
25% 4.243300e+04 42401.00000 -0.000866
50% 1.197370e+05 119689.00000 -0.000392
75% 6.397050e+05 639705.00000 -0.000005
max 1.001697e+06 966657.00000 0.106242
```
I don't have timings though.
And now to the code. The basic idea is to completely replace the whole loop.
If we can't fully kill it, don't transform.
I have left one or two comments in the code, so hopefully it can be understood.
Also, there is a few TODO's that i have left for follow-ups:
* widening of `memcmp()`/`bcmp()`
* step smaller than the comparison size
* Metadata propagation
* more than two blocks as long as there is still a single backedge?
* ???
projects / llvm / log