Michael Meskes [Tue, 6 May 2014 11:04:30 +0000 (13:04 +0200)]
Fix handling of array of char pointers in ecpglib.
When array of char * was used as target for a FETCH statement returning more
than one row, it tried to store all the result in the first element. Instead it
should dump array of char pointers with right offset, use the address instead
of the value of the C variable while reading the array and treat such variable
as char **, instead of char * for pointer arithmetic.
Patch by Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Tom Lane [Mon, 5 May 2014 18:43:49 +0000 (14:43 -0400)]
Fix possible cache invalidation failure in ReceiveSharedInvalidMessages.
Commit fad153ec45299bd4d4f29dec8d9e04e2f1c08148 modified sinval.c to reduce
the number of calls into sinvaladt.c (which require taking a shared lock)
by keeping a local buffer of collected-but-not-yet-processed messages.
However, if processing of the last message in a batch resulted in a
recursive call to ReceiveSharedInvalidMessages, we could overwrite that
message with a new one while the outer invalidation function was still
working on it. This would be likely to lead to invalidation of the wrong
cache entry, allowing subsequent processing to use stale cache data.
The fix is just to make a local copy of each message while we're processing
it.
Spotted by Andres Freund. Back-patch to 8.4 where the bug was introduced.
Tom Lane [Fri, 2 May 2014 19:30:38 +0000 (15:30 -0400)]
Fix "quiet inline" configure test for newer clang compilers.
This test used to just define an unused static inline function and check
whether that causes a warning. But newer clang versions warn about
unused static inline functions when defined inside a .c file, but not
when defined in an included header, which is the case we care about.
Change the test to cope.
Tom Lane [Thu, 1 May 2014 19:19:17 +0000 (15:19 -0400)]
Fix failure to detoast fields in composite elements of structured types.
If we have an array of records stored on disk, the individual record fields
cannot contain out-of-line TOAST pointers: the tuptoaster.c mechanisms are
only prepared to deal with TOAST pointers appearing in top-level fields of
a stored row. The same applies for ranges over composite types, nested
composites, etc. However, the existing code only took care of expanding
sub-field TOAST pointers for the case of nested composites, not for other
structured types containing composites. For example, given a command such
as
UPDATE tab SET arraycol = ARRAY[(ROW(x,42)::mycompositetype] ...
where x is a direct reference to a field of an on-disk tuple, if that field
is long enough to be toasted out-of-line then the TOAST pointer would be
inserted as-is into the array column. If the source record for x is later
deleted, the array field value would become a dangling pointer, leading
to errors along the line of "missing chunk number 0 for toast value ..."
when the value is referenced. A reproducible test case for this was
provided by Jan Pecek, but it seems likely that some of the "missing chunk
number" reports we've heard in the past were caused by similar issues.
Code-wise, the problem is that PG_DETOAST_DATUM() is not adequate to
produce a self-contained Datum value if the Datum is of composite type.
Seen in this light, the problem is not just confined to arrays and ranges,
but could also affect some other places where detoasting is done in that
way, for example form_index_tuple().
I tried teaching the array code to apply toast_flatten_tuple_attribute()
along with PG_DETOAST_DATUM() when the array element type is composite,
but this was messy and imposed extra cache lookup costs whether or not any
TOAST pointers were present, indeed sometimes when the array element type
isn't even composite (since sometimes it takes a typcache lookup to find
that out). The idea of extending that approach to all the places that
currently use PG_DETOAST_DATUM() wasn't attractive at all.
This patch instead solves the problem by decreeing that composite Datum
values must not contain any out-of-line TOAST pointers in the first place;
that is, we expand out-of-line fields at the point of constructing a
composite Datum, not at the point where we're about to insert it into a
larger tuple. This rule is applied only to true composite Datums, not
to tuples that are being passed around the system as tuples, so it's not
as invasive as it might sound at first. With this approach, the amount
of code that has to be touched for a full solution is greatly reduced,
and added cache lookup costs are avoided except when there actually is
a TOAST pointer that needs to be inlined.
The main drawback of this approach is that we might sometimes dereference
a TOAST pointer that will never actually be used by the query, imposing a
rather large cost that wasn't there before. On the other side of the coin,
if the field value is used multiple times then we'll come out ahead by
avoiding repeat detoastings. Experimentation suggests that common SQL
coding patterns are unaffected either way, though. Applications that are
very negatively affected could be advised to modify their code to not fetch
columns they won't be using.
In future, we might consider reverting this solution in favor of detoasting
only at the point where data is about to be stored to disk, using some
method that can drill down into multiple levels of nested structured types.
That will require defining new APIs for structured types, though, so it
doesn't seem feasible as a back-patchable fix.
Note that this patch changes HeapTupleGetDatum() from a macro to a function
call; this means that any third-party code using that macro will not get
protection against creating TOAST-pointer-containing Datums until it's
recompiled. The same applies to any uses of PG_RETURN_HEAPTUPLEHEADER().
It seems likely that this is not a big problem in practice: most of the
tuple-returning functions in core and contrib produce outputs that could
not possibly be toasted anyway, and the same probably holds for third-party
extensions.
This bug has existed since TOAST was invented, so back-patch to all
supported branches.
Tom Lane [Wed, 30 Apr 2014 17:46:22 +0000 (13:46 -0400)]
Check for interrupts and stack overflow during rule/view dumps.
Since ruleutils.c recurses, it could be driven to stack overflow by
deeply nested constructs. Very large queries might also take long
enough to deparse that a check for interrupts seems like a good idea.
Stick appropriate tests into a couple of key places.
Noted by Greg Stark. Back-patch to all supported branches.
Some popen() calls were missing SYSTEMQUOTEs, which caused initdb and
pg_upgrade to fail on Windows, if the installation path contained both
spaces and @ signs.
Patch by Nikhil Deshpande. Backpatch to all supported versions.
Fix two bugs in WAL-logging of GIN pending-list pages.
In writeListPage, never take a full-page image of the page, because we
have all the information required to re-initialize in the WAL record
anyway. Before this fix, a full-page image was always generated, unless
full_page_writes=off, because when the page is initialized its LSN is
always 0. In stable-branches, keep the code to restore the backup blocks
if they exist, in case that the WAL is generated with an older minor
version, but in master Assert that there are no full-page images.
In the redo routine, add missing "off++". Otherwise the tuples are added
to the page in reverse order. That happens to be harmless because we
always scan and remove all the tuples together, but it was clearly wrong.
Also, it was masked by the first bug unless full_page_writes=off, because
the page was always restored from a full-page image.
Tom Lane [Thu, 24 Apr 2014 17:29:48 +0000 (13:29 -0400)]
Reset pg_stat_activity.xact_start during PREPARE TRANSACTION.
Once we've completed a PREPARE, our session is not running a transaction,
so its entry in pg_stat_activity should show xact_start as null, rather
than leaving the value as the start time of the now-prepared transaction.
I think possibly this oversight was triggered by faulty extrapolation
from the adjacent comment that says PrepareTransaction should not call
AtEOXact_PgStat, so tweak the wording of that comment.
Noted by Andres Freund while considering bug #10123 from Maxim Boguk,
although this error doesn't seem to explain that report.
Tom Lane [Thu, 24 Apr 2014 01:21:15 +0000 (21:21 -0400)]
Fix incorrect pg_proc.proallargtypes entries for two built-in functions.
pg_sequence_parameters() and pg_identify_object() have had incorrect
proallargtypes entries since 9.1 and 9.3 respectively. This was mostly
masked by the correct information in proargtypes, but a few operations
such as pg_get_function_arguments() (and thus psql's \df display) would
show the wrong data types for these functions' input parameters.
In HEAD, fix the wrong info, bump catversion, and add an opr_sanity
regression test to catch future mistakes of this sort.
In the back branches, just fix the wrong info so that installations
initdb'd with future minor releases will have the right data. We
can't force an initdb, and it doesn't seem like a good idea to add
a regression test that will fail on existing installations.
Andrew Dunstan [Wed, 16 Apr 2014 17:35:46 +0000 (13:35 -0400)]
Attempt to get plpython regression tests working again for MSVC builds.
This has probably been broken for quite a long time. Buildfarm member
currawong's current results suggest that it's been broken since 9.1, so
backpatch this to that branch.
This only supports Python 2 - I will handle Python 3 separately, but
this is a fairly simple fix.
Tom Lane [Wed, 16 Apr 2014 17:21:03 +0000 (13:21 -0400)]
Use AF_UNSPEC not PF_UNSPEC in getaddrinfo calls.
According to the Single Unix Spec and assorted man pages, you're supposed
to use the constants named AF_xxx when setting ai_family for a getaddrinfo
call. In a few places we were using PF_xxx instead. Use of PF_xxx
appears to be an ancient BSD convention that was not adopted by later
standardization. On BSD and most later Unixen, it doesn't matter much
because those constants have equivalent values anyway; but nonetheless
this code is not per spec.
In the same vein, replace PF_INET by AF_INET in one socket() call, which
wasn't even consistent with the other socket() call in the same function
let alone the remainder of our code.
Per investigation of a Cygwin trouble report from Marco Atzeri. It's
probably a long shot that this will fix his issue, but it's wrong in
any case.
Magnus Hagander [Wed, 16 Apr 2014 15:18:02 +0000 (17:18 +0200)]
Fix timeout in LDAP lookup of libpq connection parameters
Bind attempts to an LDAP server should time out after two seconds,
allowing additional lines in the service control file to be parsed
(which provide a fall back to a secondary LDAP server or default options).
The existing code failed to enforce that timeout during TCP connect,
resulting in a hang far longer than two seconds if the LDAP server
does not respond.
Bruce Momjian [Wed, 16 Apr 2014 14:45:48 +0000 (10:45 -0400)]
check socket creation errors against PGINVALID_SOCKET
Previously, in some places, socket creation errors were checked for
negative values, which is not true for Windows because sockets are
unsigned. This masked socket creation errors on Windows.
Backpatch through 9.0. 8.4 doesn't have the infrastructure to fix this.
Use correctly-sized buffer when zero-filling a WAL file.
I mixed up BLCKSZ and XLOG_BLCKSZ when I changed the way the buffer is
allocated a couple of weeks ago. With the default settings, they are both
8k, but they can be changed at compile-time.
Don't reset the rightlink of a page when replaying a page update record.
This was a leftover from pre-hot standby days, when it was not possible to
have scans concurrent with WAL replay. Resetting the right-link was not
necessary back then either, but it was done for the sake of tidiness. But
with hot standby, it's wrong, because a concurrent scan might still need it.
Backpatch all versions with hot standby, 9.0 and above.
Tom Lane [Sat, 5 Apr 2014 22:16:17 +0000 (18:16 -0400)]
Block signals earlier during postmaster startup.
Formerly, we set up the postmaster's signal handling only when we were
about to start launching subprocesses. This is a bad idea though, as
it means that for example a SIGINT arriving before that will kill the
postmaster instantly, perhaps leaving lockfiles, socket files, shared
memory, etc laying about. We'd rather that such a signal caused orderly
postmaster termination including releasing of those resources. A simple
fix is to move the PostmasterMain stanza that initializes signal handling
to an earlier point, before we've created any such resources. Then, an
early-arriving signal will be blocked until we're ready to deal with it
in the usual way. (The only part that really needs to be moved up is
blocking of signals, but it seems best to keep the signal handler
installation calls together with that; for one thing this ensures the
kernel won't drop any signals we wished to get. The handlers won't get
invoked in any case until we unblock signals in ServerLoop.)
Per a report from MauMau. He proposed changing the way "pg_ctl stop"
works to deal with this, but that'd just be masking one symptom not
fixing the core issue.
It's been like this since forever, so back-patch to all supported branches.
Tom Lane [Sat, 5 Apr 2014 16:41:34 +0000 (12:41 -0400)]
Fix processing of PGC_BACKEND GUC parameters on Windows.
EXEC_BACKEND builds (i.e., Windows) failed to absorb values of PGC_BACKEND
parameters if they'd been changed post-startup via the config file. This
for example prevented log_connections from working if it were turned on
post-startup. The mechanism for handling this case has always been a bit
of a kluge, and it wasn't revisited when we implemented EXEC_BACKEND.
While in a normal forking environment new backends will inherit the
postmaster's value of such settings, EXEC_BACKEND backends have to read
the settings from the CONFIG_EXEC_PARAMS file, and they were mistakenly
rejecting them. So this case has always been broken in the Windows port;
so back-patch to all supported branches.
Tom Lane [Sat, 5 Apr 2014 03:09:45 +0000 (23:09 -0400)]
Fix tablespace creation WAL replay to work on Windows.
The code segment that removes the old symlink (if present) wasn't clued
into the fact that on Windows, symlinks are junction points which have
to be removed with rmdir().
Backpatch to 9.0, where the failing code was introduced.
MauMau, reviewed by Muhammad Asif Naeem and Amit Kapila
Tom Lane [Thu, 3 Apr 2014 18:18:41 +0000 (14:18 -0400)]
Fix documentation about joining pg_locks to other views.
The advice to join to pg_prepared_xacts via the transaction column was not
updated when the transaction column was replaced by virtualtransaction.
Since it's not quite obvious how to do that join, give an explicit example.
For consistency also give an example for the adjacent case of joining to
pg_stat_activity. And link-ify the view references too, just because we
can. Per bug #9840 from Alexey Bashtanov.
Tom Lane [Thu, 3 Apr 2014 15:05:55 +0000 (11:05 -0400)]
Fix documentation about size of interval type.
It's been 16 bytes, not 12, for ages. This was fixed in passing in HEAD
(commit 146604ec), but as a factual error it should have been back-patched.
Per gripe from Tatsuhito Kasahara.
Avoid palloc in critical section in GiST WAL-logging.
Memory allocation can fail if you run out of memory, and inside a critical
section that will lead to a PANIC. Use conservatively-sized arrays in stack
instead.
There was previously no explicit limit on the number of pages a GiST split
can produce, it was only limited by the number of LWLocks that can be held
simultaneously (100 at the moment). This patch adds an explicit limit of 75
pages. That should be plenty, a typical split shouldn't produce more than
2-3 page halves.
The bug has been there forever, but only backpatch down to 9.1. The code
was changed significantly in 9.1, and it doesn't seem worth the risk or
trouble to adapt this for 9.0 and 8.4.
Tom Lane [Wed, 2 Apr 2014 21:11:34 +0000 (17:11 -0400)]
Fix assorted issues in client host name lookup.
The code for matching clients to pg_hba.conf lines that specify host names
(instead of IP address ranges) failed to complain if reverse DNS lookup
failed; instead it silently didn't match, so that you might end up getting
a surprising "no pg_hba.conf entry for ..." error, as seen in bug #9518
from Mike Blackwell. Since we don't want to make this a fatal error in
situations where pg_hba.conf contains a mixture of host names and IP
addresses (clients matching one of the numeric entries should not have to
have rDNS data), remember the lookup failure and mention it as DETAIL if
we get to "no pg_hba.conf entry". Apply the same approach to forward-DNS
lookup failures, too, rather than treating them as immediate hard errors.
Along the way, fix a couple of bugs that prevented us from detecting an
rDNS lookup error reliably, and make sure that we make only one rDNS lookup
attempt; formerly, if the lookup attempt failed, the code would try again
for each host name entry in pg_hba.conf. Since more or less the whole
point of this design is to ensure there's only one lookup attempt not one
per entry, the latter point represents a performance bug that seems
sufficient justification for back-patching.
Also, adjust src/port/getaddrinfo.c so that it plays as well as it can
with this code. Which is not all that well, since it does not have actual
support for rDNS lookup, but at least it should return the expected (and
required by spec) error codes so that the main code correctly perceives the
lack of functionality as a lookup failure. It's unlikely that PG is still
being used in production on any machines that require our getaddrinfo.c,
so I'm not excited about working harder than this.
Tom Lane [Wed, 2 Apr 2014 01:30:18 +0000 (21:30 -0400)]
Fix bugs in manipulation of PgBackendStatus.st_clienthostname.
Initialization of this field was not being done according to the
st_changecount protocol (it has to be done within the changecount increment
range, not outside). And the test to see if the value should be reported
as null was wrong. Noted while perusing uses of Port.remote_hostname.
This was wrong from the introduction of this code (commit 4a25bc145),
so back-patch to 9.1.
Noah Misch [Sat, 29 Mar 2014 04:52:56 +0000 (00:52 -0400)]
Secure Unix-domain sockets of "make check" temporary clusters.
Any OS user able to access the socket can connect as the bootstrap
superuser and in turn execute arbitrary code as the OS user running the
test. Protect against that by placing the socket in the temporary data
directory, which has mode 0700 thanks to initdb. Back-patch to 8.4 (all
supported versions). The hazard remains wherever the temporary cluster
accepts TCP connections, notably on Windows.
Attempts to run "make check" from a directory with a long name will now
fail. An alternative not sharing that problem was to place the socket
in a subdirectory of /tmp, but that is only secure if /tmp is sticky.
The PG_REGRESS_SOCK_DIR environment variable is available as a
workaround when testing from long directory paths.
As a convenient side effect, this lets testing proceed smoothly in
builds that override DEFAULT_PGSOCKET_DIR. Popular non-default values
like /var/run/postgresql are often unwritable to the build user.
Tom Lane [Wed, 26 Mar 2014 20:41:41 +0000 (16:41 -0400)]
Fix refcounting bug in PLy_modify_tuple().
We must increment the refcount on "plntup" as soon as we have the
reference, not sometime later. Otherwise, if an error is thrown in
between, the Py_XDECREF(plntup) call in the PG_CATCH block removes a
refcount we didn't add, allowing the object to be freed even though
it's still part of the plpython function's parsetree.
This appears to be the cause of crashes seen on buildfarm member
prairiedog. It's a bit surprising that we've not seen it fail repeatably
before, considering that the regression tests have been exercising the
faulty code path since 2009.
The real-world impact is probably minimal, since it's unlikely anyone would
be provoking the "TD["new"] is not a dictionary" error in production, and
that's the only case that is actually wrong. Still, it's a bug affecting
the regression tests, so patch all supported branches.
In passing, remove dead variable "plstr", and demote "platt" to a local
variable inside the PG_TRY block, since we don't need to clean it up
in the PG_CATCH path.
Fujii Masao [Mon, 17 Mar 2014 11:42:35 +0000 (20:42 +0900)]
Fix bug in clean shutdown of walsender that pg_receiving is connecting to.
On clean shutdown, walsender waits for all WAL to be replicated to a standby,
and exits. It determined whether that replication had been completed by
checking whether its sent location had been equal to a standby's flush
location. Unfortunately this condition never becomes true when the standby
such as pg_receivexlog which always returns an invalid flush location is
connecting to walsender, and then walsender waits forever.
This commit changes walsender so that it just checks a standby's write
location if a flush location is invalid.
Back-patch to 9.1 where enough infrastructure for this exists.
Tom Lane [Mon, 17 Mar 2014 01:43:49 +0000 (21:43 -0400)]
Fix advertised dispsize for libpq's sslmode connection parameter.
"8" was correct back when "disable" was the longest allowed value, but
since "verify-full" was added, it should be "12". Given the lack of
complaints, I wouldn't be surprised if nobody is actually using these
values ... but still, if they're in the API, they should be right.
Noticed while pursuing a different problem. It's been wrong for quite
a long time, so back-patch to all supported branches.
Tom Lane [Fri, 14 Mar 2014 00:59:51 +0000 (20:59 -0400)]
Prevent interrupts while reporting non-ERROR elog messages.
This should eliminate the risk of recursive entry to syslog(3), which
appears to be the cause of the hang reported in bug #9551 from James
Morton.
Arguably, the real problem here is auth.c's willingness to turn on
ImmediateInterruptOK while executing fairly wide swaths of backend code.
We may well need to work at narrowing the code ranges in which the
authentication_timeout interrupt is enabled. For the moment, though,
this is a cheap and reasonably noninvasive fix for a field-reported
failure; the other approach would be complex and not necessarily
bug-free itself.
Tom Lane [Thu, 13 Mar 2014 16:03:03 +0000 (12:03 -0400)]
Avoid transaction-commit race condition while receiving a NOTIFY message.
Use TransactionIdIsInProgress, then TransactionIdDidCommit, to distinguish
whether a NOTIFY message's originating transaction is in progress,
committed, or aborted. The previous coding could accept a message from a
transaction that was still in-progress according to the PGPROC array;
if the client were fast enough at starting a new transaction, it might fail
to see table rows added/updated by the message-sending transaction. Which
of course would usually be the point of receiving the message. We noted
this type of race condition long ago in tqual.c, but async.c overlooked it.
The race condition probably cannot occur unless there are multiple NOTIFY
senders in action, since an individual backend doesn't send NOTIFY signals
until well after it's done committing. But if two senders commit in close
succession, it's certainly possible that we could see the second sender's
message within the race condition window while responding to the signal
from the first one.
Per bug #9557 from Marko Tiikkaja. This patch is slightly more invasive
than what he proposed, since it removes the now-redundant
TransactionIdDidAbort call.
Back-patch to 9.0, where the current NOTIFY implementation was introduced.
In WAL replay, restore GIN metapage unconditionally to avoid torn page.
We don't take a full-page image of the GIN metapage; instead, the WAL record
contains all the information required to reconstruct it from scratch. But
to avoid torn page hazards, we must re-initialize it from the WAL record
every time, even if it already has a greater LSN, similar to how normal full
page images are restored.
This was highly unlikely to cause any problems in practice, because the GIN
metapage is small. We rely on an update smaller than a 512 byte disk sector
to be atomic elsewhere, at least in pg_control. But better safe than sorry,
and this would be easy to overlook if more fields are added to the metapage
so that it's no longer small.
Reported by Noah Misch. Backpatch to all supported versions.
Fix dangling smgr_owner pointer when a fake relcache entry is freed.
A fake relcache entry can "own" a SmgrRelation object, like a regular
relcache entry. But when it was free'd, the owner field in SmgrRelation
was not cleared, so it was left pointing to free'd memory.
Amazingly this apparently hasn't caused crashes in practice, or we would've
heard about it earlier. Andres found this with Valgrind.
Report and fix by Andres Freund, with minor modifications by me. Backpatch
to all supported versions.
Tom Lane [Fri, 7 Mar 2014 00:31:16 +0000 (19:31 -0500)]
Avoid getting more than AccessShareLock when deparsing a query.
In make_ruledef and get_query_def, we have long used AcquireRewriteLocks
to ensure that the querytree we are about to deparse is up-to-date and
the schemas of the underlying relations aren't changing. Howwever, that
function thinks the query is about to be executed, so it acquires locks
that are stronger than necessary for the purpose of deparsing. Thus for
example, if pg_dump asks to deparse a rule that includes "INSERT INTO t",
we'd acquire RowExclusiveLock on t. That results in interference with
concurrent transactions that might for example ask for ShareLock on t.
Since pg_dump is documented as being purely read-only, this is unexpected.
(Worse, it used to actually be read-only; this behavior dates back only
to 8.1, cf commit ba4200246.)
Fix this by adding a parameter to AcquireRewriteLocks to tell it whether
we want the "real" execution locks or only AccessShareLock.
Report, diagnosis, and patch by Dean Rasheed. Back-patch to all supported
branches.
Fix lastReplayedEndRecPtr calculation when starting from shutdown checkpoint.
When entering crash recovery followed by archive recovery, and the latest
checkpoint is a shutdown checkpoint, and there are no more WAL records to
replay before transitioning from crash to archive recovery, we would not
immediately allow read-only connections in hot standby mode even if we
could. That's because when starting from a shutdown checkpoint, we set
lastReplayedEndRecPtr incorrectly to the record before the checkpoint
record, instead of the checkpoint record itself. We don't run the redo
routine of the shutdown checkpoint record, but starting recovery from it
goes through the same motions, so it should be considered as replayed.
Reported by Kyotaro HORIGUCHI. All versions with hot standby are affected,
so backpatch to 9.0.
Tom Lane [Sat, 1 Mar 2014 20:21:07 +0000 (15:21 -0500)]
Allow regex operations to be terminated early by query cancel requests.
The regex code didn't have any provision for query cancel; which is
unsurprising given its non-Postgres origin, but still problematic since
some operations can take a long time. Introduce a callback function to
check for a pending query cancel or session termination request, and
call it in a couple of strategic spots where we can make the regex code
exit with an error indicator.
If we ever actually split out the regex code as a standalone library,
some additional work will be needed to let the cancel callback function
be specified externally to the library. But that's straightforward
(certainly so by comparison to putting the locale-dependent character
classification logic on a similar arms-length basis), and there seems
no need to do it right now.
A bigger issue is that there may be more places than these two where
we need to check for cancels. We can always add more checks later,
now that the infrastructure is in place.
Since there are known examples of not-terribly-long regexes that can
lock up a backend for a long time, back-patch to all supported branches.
I have hopes of fixing the known performance problems later, but adding
query cancel ability seems like a good idea even if they were all fixed.
Tom Lane [Tue, 25 Feb 2014 21:04:16 +0000 (16:04 -0500)]
Use SnapshotDirty rather than an active snapshot to probe index endpoints.
If there are lots of uncommitted tuples at the end of the index range,
get_actual_variable_range() ends up fetching each one and doing an MVCC
visibility check on it, until it finally hits a visible tuple. This is
bad enough in isolation, considering that we don't need an exact answer
only an approximate one. But because the tuples are not yet committed,
each visibility check does a TransactionIdIsInProgress() test, which
involves scanning the ProcArray. When multiple sessions do this
concurrently, the ensuing contention results in horrid performance loss.
20X overall throughput loss on not-too-complicated queries is easy to
demonstrate in the back branches (though someone's made it noticeably
less bad in HEAD).
We can dodge the problem fairly effectively by using SnapshotDirty rather
than a normal MVCC snapshot. This will cause the index probe to take
uncommitted tuples as good, so that we incur only one tuple fetch and test
even if there are many such tuples. The extent to which this degrades the
estimate is debatable: it's possible the result is actually a more accurate
prediction than before, if the endmost tuple has become committed by the
time we actually execute the query being planned. In any case, it's not
very likely that it makes the estimate a lot worse.
SnapshotDirty will still reject tuples that are known committed dead, so
we won't give bogus answers if an invalid outlier has been deleted but not
yet vacuumed from the index. (Because btrees know how to mark such tuples
dead in the index, we shouldn't have a big performance problem in the case
that there are many of them at the end of the range.) This consideration
motivates not using SnapshotAny, which was also considered as a fix.
Note: the back branches were using SnapshotNow instead of an MVCC snapshot,
but the problem and solution are the same.
Per performance complaints from Bartlomiej Romanski, Josh Berkus, and
others. Back-patch to 9.0, where the issue was introduced (by commit 40608e7f949fb7e4025c0ddd5be01939adc79eec).
Tom Lane [Tue, 18 Feb 2014 17:44:30 +0000 (12:44 -0500)]
Remove broken code that tried to handle OVERLAPS with a single argument.
The SQL standard says that OVERLAPS should have a two-element row
constructor on each side. The original coding of OVERLAPS support in
our grammar attempted to extend that by allowing a single-element row
constructor, which it internally duplicated ... or tried to, anyway.
But that code has certainly not worked since our List infrastructure was
rewritten in 2004, and I'm none too sure it worked before that. As it
stands, it ends up building a List that includes itself, leading to
assorted undesirable behaviors later in the parser.
Even if it worked as intended, it'd be a bit evil because of the
possibility of duplicate evaluation of a volatile function that the user
had written only once. Given the lack of documentation, test cases, or
complaints, let's just get rid of the idea and only support the standard
syntax.
While we're at it, improve the error cursor positioning for the
wrong-number-of-arguments errors, and inline the makeOverlaps() function
since it's only called in one place anyway.
Per bug #9227 from Joshua Yanovski. Initial patch by Joshua Yanovski,
extended a bit by me.
Tom Lane [Mon, 17 Feb 2014 16:24:45 +0000 (11:24 -0500)]
Document risks of "make check" in the regression testing instructions.
Since the temporary server started by "make check" uses "trust"
authentication, another user on the same machine could connect to it
as database superuser, and then potentially exploit the privileges of
the operating-system user who started the tests. We should change
the testing procedures to prevent this risk; but discussion is required
about the best way to do that, as well as more testing than is practical
for an undisclosed security problem. Besides, the same issue probably
affects some user-written test harnesses. So for the moment, we'll just
warn people against using "make check" when there are untrusted users on
the same machine.
In passing, remove some ancient advice that suggested making the
regression testing subtree world-writable if you'd built as root.
That looks dangerously insecure in modern contexts, and anyway we
should not be encouraging people to build Postgres as root.
Tom Lane [Mon, 17 Feb 2014 16:20:31 +0000 (11:20 -0500)]
Prevent potential overruns of fixed-size buffers.
Coverity identified a number of places in which it couldn't prove that a
string being copied into a fixed-size buffer would fit. We believe that
most, perhaps all of these are in fact safe, or are copying data that is
coming from a trusted source so that any overrun is not really a security
issue. Nonetheless it seems prudent to forestall any risk by using
strlcpy() and similar functions.
Fixes by Peter Eisentraut and Jozef Mlich based on Coverity reports.
In addition, fix a potential null-pointer-dereference crash in
contrib/chkpass. The crypt(3) function is defined to return NULL on
failure, but chkpass.c didn't check for that before using the result.
The main practical case in which this could be an issue is if libc is
configured to refuse to execute unapproved hashing algorithms (e.g.,
"FIPS mode"). This ideally should've been a separate commit, but
since it touches code adjacent to one of the buffer overrun changes,
I included it in this commit to avoid last-minute merge issues.
This issue was reported by Honza Horak.
Security: CVE-2014-0065 for buffer overruns, CVE-2014-0066 for crypt()
Noah Misch [Mon, 17 Feb 2014 14:33:31 +0000 (09:33 -0500)]
Predict integer overflow to avoid buffer overruns.
Several functions, mostly type input functions, calculated an allocation
size such that the calculation wrapped to a small positive value when
arguments implied a sufficiently-large requirement. Writes past the end
of the inadvertent small allocation followed shortly thereafter.
Coverity identified the path_in() vulnerability; code inspection led to
the rest. In passing, add check_stack_depth() to prevent stack overflow
in related functions.
Back-patch to 8.4 (all supported versions). The non-comment hstore
changes touch code that did not exist in 8.4, so that part stops at 9.0.
Noah Misch and Heikki Linnakangas, reviewed by Tom Lane.
Noah Misch [Mon, 17 Feb 2014 14:33:31 +0000 (09:33 -0500)]
Fix handling of wide datetime input/output.
Many server functions use the MAXDATELEN constant to size a buffer for
parsing or displaying a datetime value. It was much too small for the
longest possible interval output and slightly too small for certain
valid timestamp input, particularly input with a long timezone name.
The long input was rejected needlessly; the long output caused
interval_out() to overrun its buffer. ECPG's pgtypes library has a copy
of the vulnerable functions, which bore the same vulnerabilities along
with some of its own. In contrast to the server, certain long inputs
caused stack overflow rather than failing cleanly. Back-patch to 8.4
(all supported versions).
Reported by Daniel Schüssler, reviewed by Tom Lane.
Robert Haas [Mon, 17 Feb 2014 14:33:31 +0000 (09:33 -0500)]
Avoid repeated name lookups during table and index DDL.
If the name lookups come to different conclusions due to concurrent
activity, we might perform some parts of the DDL on a different table
than other parts. At least in the case of CREATE INDEX, this can be
used to cause the permissions checks to be performed against a
different table than the index creation, allowing for a privilege
escalation attack.
This changes the calling convention for DefineIndex, CreateTrigger,
transformIndexStmt, transformAlterTableStmt, CheckIndexCompatible
(in 9.2 and newer), and AlterTable (in 9.1 and older). In addition,
CheckRelationOwnership is removed in 9.2 and newer and the calling
convention is changed in older branches. A field has also been added
to the Constraint node (FkConstraint in 8.4). Third-party code calling
these functions or using the Constraint node will require updating.
Report by Andres Freund. Patch by Robert Haas and Andres Freund,
reviewed by Tom Lane.
Noah Misch [Mon, 17 Feb 2014 14:33:31 +0000 (09:33 -0500)]
Prevent privilege escalation in explicit calls to PL validators.
The primary role of PL validators is to be called implicitly during
CREATE FUNCTION, but they are also normal functions that a user can call
explicitly. Add a permissions check to each validator to ensure that a
user cannot use explicit validator calls to achieve things he could not
otherwise achieve. Back-patch to 8.4 (all supported versions).
Non-core procedural language extensions ought to make the same two-line
change to their own validators.
Andres Freund, reviewed by Tom Lane and Noah Misch.
Noah Misch [Mon, 17 Feb 2014 14:33:31 +0000 (09:33 -0500)]
Shore up ADMIN OPTION restrictions.
Granting a role without ADMIN OPTION is supposed to prevent the grantee
from adding or removing members from the granted role. Issuing SET ROLE
before the GRANT bypassed that, because the role itself had an implicit
right to add or remove members. Plug that hole by recognizing that
implicit right only when the session user matches the current role.
Additionally, do not recognize it during a security-restricted operation
or during execution of a SECURITY DEFINER function. The restriction on
SECURITY DEFINER is not security-critical. However, it seems best for a
user testing his own SECURITY DEFINER function to see the same behavior
others will see. Back-patch to 8.4 (all supported versions).
The SQL standards do not conflate roles and users as PostgreSQL does;
only SQL roles have members, and only SQL users initiate sessions. An
application using PostgreSQL users and roles as SQL users and roles will
never attempt to grant membership in the role that is the session user,
so the implicit right to add or remove members will never arise.
The security impact was mostly that a role member could revoke access
from others, contrary to the wishes of his own grantor. Unapproved role
member additions are less notable, because the member can still largely
achieve that by creating a view or a SECURITY DEFINER function.
Reviewed by Andres Freund and Tom Lane. Reported, independently, by
Jonas Sundman and Noah Misch.
Tom Lane [Sat, 15 Feb 2014 02:59:13 +0000 (21:59 -0500)]
Update time zone data files to tzdata release 2013i.
DST law changes in Jordan; historical changes in Cuba.
Also, remove the zones Asia/Riyadh87, Asia/Riyadh88, and Asia/Riyadh89.
Per the upstream announcement:
The files solar87, solar88, and solar89 are no longer distributed.
They were a negative experiment -- that is, a demonstration that
tz data can represent solar time only with some difficulty and error.
Their presence in the distribution caused confusion, as Riyadh
civil time was generally not solar time in those years.
Tom Lane [Fri, 14 Feb 2014 21:50:32 +0000 (16:50 -0500)]
Update regression testing instructions.
This documentation never got the word about the existence of check-world or
installcheck-world. Revise to recommend use of those, and document all the
subsidiary test suites. Do some minor wordsmithing elsewhere, too.
In passing, remove markup related to generation of plain-text regression
test instructions, since we don't do that anymore.
Back-patch to 9.1 where check-world was added. (installcheck-world exists
in 9.0; but since check-world doesn't, this patch would need additional
work to cover that branch, and it doesn't seem worth the effort.)
Tom Lane [Fri, 14 Feb 2014 17:54:50 +0000 (12:54 -0500)]
Suggest shell here-documents instead of psql -c for multiple commands.
The documentation suggested using "echo | psql", but not the often-superior
alternative of a here-document. Also, be more direct about suggesting
that people avoid -c for multiple commands. Per discussion.
Tom Lane [Thu, 13 Feb 2014 23:45:23 +0000 (18:45 -0500)]
Clean up error cases in psql's COPY TO STDOUT/FROM STDIN code.
Adjust handleCopyOut() to stop trying to write data once it's failed
one time. For typical cases such as out-of-disk-space or broken-pipe,
additional attempts aren't going to do anything but waste time, and
in any case clean truncation of the output seems like a better behavior
than randomly dropping blocks in the middle.
Also remove dubious (and misleadingly documented) attempt to force our way
out of COPY_OUT state if libpq didn't do that. If we did have a situation
like that, it'd be a bug in libpq and would be better fixed there, IMO.
We can hope that commit fa4440f51628d692f077d54b8313aea31af087ea took care
of any such problems, anyway.
Also fix longstanding bug in handleCopyIn(): PQputCopyEnd() only supports
a non-null errormsg parameter in protocol version 3, and will actively
fail if one is passed in version 2. This would've made our attempts
to get out of COPY_IN state after a failure into infinite loops when
talking to pre-7.4 servers.
Back-patch the COPY_OUT state change business back to 9.2 where it was
introduced, and the other two fixes into all supported branches.
Tom Lane [Thu, 13 Feb 2014 19:24:52 +0000 (14:24 -0500)]
Fix length checking for Unicode identifiers containing escapes (U&"...").
We used the length of the input string, not the de-escaped string, as
the trigger for NAMEDATALEN truncation. AFAICS this would only result
in sometimes printing a phony truncation warning; but it's just luck
that there was no worse problem, since we were violating the API spec
for truncate_identifier(). Per bug #9204 from Joshua Yanovski.
This has been wrong since the Unicode-identifier support was added,
so back-patch to all supported branches.
Tom Lane [Thu, 13 Feb 2014 00:09:27 +0000 (19:09 -0500)]
Improve cross-references between minor version release notes.
We have a practice of providing a "bread crumb" trail between the minor
versions where the migration section actually tells you to do something.
Historically that was just plain text, eg, "see the release notes for
9.2.4"; but if you're using a browser or PDF reader, it's a lot nicer
if it's a live hyperlink. So use "<xref>" instead. Any argument against
doing this vanished with the recent decommissioning of plain-text release
notes.
Tom Lane [Wed, 12 Feb 2014 22:50:16 +0000 (17:50 -0500)]
Improve libpq's error recovery for connection loss during COPY.
In pqSendSome, if the connection is already closed at entry, discard any
queued output data before returning. There is no possibility of ever
sending the data, and anyway this corresponds to what we'd do if we'd
detected a hard error while trying to send(). This avoids possible
indefinite bloat of the output buffer if the application keeps trying
to send data (or even just keeps trying to do PQputCopyEnd, as psql
indeed will).
Because PQputCopyEnd won't transition out of PGASYNC_COPY_IN state
until it's successfully queued the COPY END message, and pqPutMsgEnd
doesn't distinguish a queuing failure from a pqSendSome failure,
this omission allowed an infinite loop in psql if the connection closure
occurred when we had at least 8K queued to send. It might be worth
refactoring so that we can make that distinction, but for the moment
the other changes made here seem to offer adequate defenses.
To guard against other variants of this scenario, do not allow
PQgetResult to return a PGRES_COPY_XXX result if the connection is
already known dead. Make sure it returns PGRES_FATAL_ERROR instead.
Per report from Stephen Frost. Back-patch to all active branches.
Tom Lane [Wed, 12 Feb 2014 19:52:26 +0000 (14:52 -0500)]
In XLogReadBufferExtended, don't assume P_NEW yields consecutive pages.
In a database that's not yet reached consistency, it's possible that some
segments of a relation are not full-size but are not the last ones either.
Because of the way smgrnblocks() works, asking for a new page with P_NEW
will fill in the last not-full-size segment --- and if that makes it full
size, the apparent EOF of the relation will increase by more than one page,
so that the next P_NEW request will yield a page past the next consecutive
one. This breaks the relation-extension logic in XLogReadBufferExtended,
possibly allowing a page update to be applied to some page far past where
it was intended to go. This appears to be the explanation for reports of
table bloat on replication slaves compared to their masters, and probably
explains some corrupted-slave reports as well.
Fix the loop to check the page number it actually got, rather than merely
Assert()'ing that dead reckoning got it to the desired place. AFAICT,
there are no other places that make assumptions about exactly which page
they'll get from P_NEW.
Problem identified by Greg Stark, though this is not the same as his
proposed patch.
It's been like this for a long time, so back-patch to all supported
branches.
Tom Lane [Tue, 11 Feb 2014 01:48:23 +0000 (20:48 -0500)]
Don't generate plain-text HISTORY and src/test/regress/README anymore.
Providing this information as plain text was doubtless worth the trouble
ten years ago, but it seems likely that hardly anyone reads it in this
format anymore. And the effort required to maintain these files (in the
form of extra-complex markup rules in the relevant parts of the SGML
documentation) is significant. So, let's stop doing that and rely solely
on the other documentation formats.
Per discussion, the plain-text INSTALL instructions might still be worth
their keep, so we continue to generate that file.
Rather than remove HISTORY and src/test/regress/README from distribution
tarballs entirely, replace them with simple stub files that tell the reader
where to find the relevant documentation. This is mainly to avoid possibly
breaking packaging recipes that expect these files to exist.
Back-patch to all supported branches, because simplifying the markup
requirements for release notes won't help much unless we do it in all
branches.
Tom Lane [Sat, 1 Feb 2014 23:27:04 +0000 (18:27 -0500)]
Fix some wide-character bugs in the text-search parser.
In p_isdigit and other character class test functions generated by the
p_iswhat macro, the code path for non-C locales with multibyte encodings
contained a bogus pointer cast that would accidentally fail to malfunction
if types wchar_t and wint_t have the same width. Apparently that is true
on most platforms, but not on recent Cygwin releases. Remove the cast,
as it seems completely unnecessary (I think it arose from a false analogy
to the need to cast to unsigned char when dealing with the <ctype.h>
functions). Per bug #8970 from Marco Atzeri.
In the same functions, the code path for C locale with a multibyte encoding
simply ANDed each wide character with 0xFF before passing it to the
corresponding <ctype.h> function. This could result in false positive
answers for some non-ASCII characters, so use a range test instead.
Noted by me while investigating Marco's complaint.
Also, remove some useless though not actually buggy maskings and casts
in the hand-coded p_isalnum and p_isalpha functions, which evidently
got tested a bit more carefully than the macro-generated functions.
Tom Lane [Sat, 1 Feb 2014 21:21:07 +0000 (16:21 -0500)]
Fix some more bugs in signal handlers and process shutdown logic.
WalSndKill was doing things exactly backwards: it should first clear
MyWalSnd (to stop signal handlers from touching MyWalSnd->latch),
then disown the latch, and only then mark the WalSnd struct unused by
clearing its pid field.
Also, WalRcvSigUsr1Handler and worker_spi_sighup failed to preserve
errno, which is surely a requirement for any signal handler.
Per discussion of recent buildfarm failures. Back-patch as far
as the relevant code exists.
Andrew Dunstan [Sat, 1 Feb 2014 20:16:29 +0000 (15:16 -0500)]
Copy the libpq DLL to the bin directory on Mingw and Cygwin.
This has long been done by the MSVC build system, and has caused
confusion in the past when programs like psql have failed to start
because they can't find the DLL. If it's in the same directory as it now
will be they will find it.
Robert Haas [Sat, 1 Feb 2014 02:31:08 +0000 (21:31 -0500)]
Clear MyProc and MyProcSignalState before they become invalid.
Evidence from buildfarm member crake suggests that the new test_shm_mq
module is routinely crashing the server due to the arrival of a SIGUSR1
after the shared memory segment has been unmapped. Although processes
using the new dynamic background worker facilities are more likely to
receive a SIGUSR1 around this time, the problem is also possible on older
branches, so I'm back-patching the parts of this change that apply to
older branches as far as they apply.
It's already generally the case that code checks whether these pointers
are NULL before deferencing them, so the important thing is mostly to
make sure that they do get set to NULL before they become invalid. But
in master, there's one case in procsignal_sigusr1_handler that lacks a
NULL guard, so add that.
Tom Lane [Thu, 30 Jan 2014 01:04:08 +0000 (20:04 -0500)]
Fix unsafe references to errno within error messaging logic.
Various places were supposing that errno could be expected to hold still
within an ereport() nest or similar contexts. This isn't true necessarily,
though in some cases it accidentally failed to fail depending on how the
compiler chanced to order the subexpressions. This class of thinko
explains recent reports of odd failures on clang-built versions, typically
missing or inappropriate HINT fields in messages.
Problem identified by Christian Kruse, who also submitted the patch this
commit is based on. (I fixed a few issues in his patch and found a couple
of additional places with the same disease.)
Back-patch as appropriate to all supported branches.
Fujii Masao [Thu, 23 Jan 2014 14:01:34 +0000 (23:01 +0900)]
Fix bugs in PQhost().
In the platform that doesn't support Unix-domain socket, when
neither host nor hostaddr are specified, the default host
'localhost' is used to connect to the server and PQhost() must
return that, but it didn't. This patch fixes PQhost() so that
it returns the default host in that case.
Also this patch fixes PQhost() so that it doesn't return
Unix-domain socket directory path in the platform that doesn't
support Unix-domain socket.
Stephen Frost [Wed, 22 Jan 2014 03:49:22 +0000 (22:49 -0500)]
Allow type_func_name_keywords in even more places
A while back, 2c92edad48796119c83d7dbe6c33425d1924626d allowed
type_func_name_keywords to be used in more places, including role
identifiers. Unfortunately, that commit missed out on cases where
name_list was used for lists-of-roles, eg: for DROP ROLE. This
resulted in the unfortunate situation that you could CREATE a role
with a type_func_name_keywords-allowed identifier, but not DROP it
(directly- ALTER could be used to rename it to something which
could be DROP'd).
This extends allowing type_func_name_keywords to places where role
lists can be used.
Stephen Frost [Sat, 18 Jan 2014 23:41:52 +0000 (18:41 -0500)]
Allow SET TABLESPACE to database default
We've always allowed CREATE TABLE to create tables in the database's default
tablespace without checking for CREATE permissions on that tablespace.
Unfortunately, the original implementation of ALTER TABLE ... SET TABLESPACE
didn't pick up on that exception.
This changes ALTER TABLE ... SET TABLESPACE to allow the database's default
tablespace without checking for CREATE rights on that tablespace, just as
CREATE TABLE works today. Users could always do this through a series of
commands (CREATE TABLE ... AS SELECT * FROM ...; DROP TABLE ...; etc), so
let's fix the oversight in SET TABLESPACE's original implementation.
Tom Lane [Tue, 14 Jan 2014 22:34:57 +0000 (17:34 -0500)]
Fix multiple bugs in index page locking during hot-standby WAL replay.
In ordinary operation, VACUUM must be careful to take a cleanup lock on
each leaf page of a btree index; this ensures that no indexscans could
still be "in flight" to heap tuples due to be deleted. (Because of
possible index-tuple motion due to concurrent page splits, it's not enough
to lock only the pages we're deleting index tuples from.) In Hot Standby,
the WAL replay process must likewise lock every leaf page. There were
several bugs in the code for that:
* The replay scan might come across unused, all-zero pages in the index.
While btree_xlog_vacuum itself did the right thing (ie, nothing) with
such pages, xlogutils.c supposed that such pages must be corrupt and
would throw an error. This accounts for various reports of replication
failures with "PANIC: WAL contains references to invalid pages". To
fix, add a ReadBufferMode value that instructs XLogReadBufferExtended
not to complain when we're doing this.
* btree_xlog_vacuum performed the extra locking if standbyState ==
STANDBY_SNAPSHOT_READY, but that's not the correct test: we won't open up
for hot standby queries until the database has reached consistency, and
we don't want to do the extra locking till then either, for fear of reading
corrupted pages (which bufmgr.c would complain about). Fix by exporting a
new function from xlog.c that will report whether we're actually in hot
standby replay mode.
* To ensure full coverage of the index in the replay scan, btvacuumscan
would emit a dummy WAL record for the last page of the index, if no
vacuuming work had been done on that page. However, if the last page
of the index is all-zero, that would result in corruption of said page,
since the functions called on it weren't prepared to handle that case.
There's no need to lock any such pages, so change the logic to target
the last normal leaf page instead.
The first two of these bugs were diagnosed by Andres Freund, the other one
by me. Fixes based on ideas from Heikki Linnakangas and myself.
This has been wrong since Hot Standby was introduced, so back-patch to 9.0.
Tom Lane [Mon, 13 Jan 2014 18:07:20 +0000 (13:07 -0500)]
Fix possible buffer overrun in contrib/pg_trgm.
Allow for the possibility that folding a string to lower case makes it
longer (due to replacing a character with a longer multibyte character).
This doesn't change the number of trigrams that will be extracted, but
it does affect the required size of an intermediate buffer in
generate_trgm(). Per bug #8821 from Ufuk Kayserilioglu.
Also install some checks that the input string length is not so large
as to cause overflow in the calculations of palloc request sizes.
Tom Lane [Sat, 11 Jan 2014 21:35:37 +0000 (16:35 -0500)]
Fix possible crashes due to using elog/ereport too early in startup.
Per reports from Andres Freund and Luke Campbell, a server failure during
set_pglocale_pgservice results in a segfault rather than a useful error
message, because the infrastructure needed to use ereport hasn't been
initialized; specifically, MemoryContextInit hasn't been called.
One known cause of this is starting the server in a directory it
doesn't have permission to read.
We could try to prevent set_pglocale_pgservice from using anything that
depends on palloc or elog, but that would be messy, and the odds of future
breakage seem high. Moreover there are other things being called in main.c
that look likely to use palloc or elog too --- perhaps those things
shouldn't be there, but they are there today. The best solution seems to
be to move the call of MemoryContextInit to very early in the backend's
real main() function. I've verified that an elog or ereport occurring
immediately after that is now capable of sending something useful to
stderr.
I also added code to elog.c to print something intelligible rather than
just crashing if MemoryContextInit hasn't created the ErrorContext.
This could happen if MemoryContextInit itself fails (due to malloc
failure), and provides some future-proofing against someone trying to
sneak in new code even earlier in server startup.
Back-patch to all supported branches. Since we've only heard reports of
this type of failure recently, it may be that some recent change has made
it more likely to see a crash of this kind; but it sure looks like it's
broken all the way back.
Tom Lane [Sat, 11 Jan 2014 18:41:41 +0000 (13:41 -0500)]
Fix compute_scalar_stats() for case that all values exceed WIDTH_THRESHOLD.
The standard typanalyze functions skip over values whose detoasted size
exceeds WIDTH_THRESHOLD (1024 bytes), so as to limit memory bloat during
ANALYZE. However, we (I think I, actually :-() failed to consider the
possibility that *every* non-null value in a column is too wide. While
compute_minimal_stats() seems to behave reasonably anyway in such a case,
compute_scalar_stats() just fell through and generated no pg_statistic
entry at all. That's unnecessarily pessimistic: we can still produce
valid stanullfrac and stawidth values in such cases, since we do include
too-wide values in the average-width calculation. Furthermore, since the
general assumption in this code is that too-wide values are probably all
distinct from each other, it seems reasonable to set stadistinct to -1
("all distinct").
Per complaint from Kadri Raudsepp. This has been like this since roughly
neolithic times, so back-patch to all supported branches.
Michael Meskes [Thu, 9 Jan 2014 14:41:51 +0000 (15:41 +0100)]
Fix descriptor output in ECPG.
While working on most platforms the old way sometimes created alignment
problems. This should fix it. Also the regresion tests were updated to test for
the reported case.
Tom Lane [Thu, 9 Jan 2014 01:18:17 +0000 (20:18 -0500)]
Fix "cannot accept a set" error when only some arms of a CASE return a set.
In commit c1352052ef1d4eeb2eb1d822a207ddc2d106cb13, I implemented an
optimization that assumed that a function's argument expressions would
either always return a set (ie multiple rows), or always not. This is
wrong however: we allow CASE expressions in which some arms return a set
of some type and others just return a scalar of that type. There may be
other examples as well. To fix, replace the run-time test of whether an
argument returned a set with a static precheck (expression_returns_set).
This adds a little bit of query startup overhead, but it seems barely
measurable.
Per bug #8228 from David Johnston. This has been broken since 8.0,
so patch all supported branches.
projects / postgresql / log