Reid Kleckner [Fri, 9 Dec 2016 21:10:43 +0000 (21:10 +0000)]
Remove special error recovery for ::(id)
The code pattern used to implement the token rewriting hack doesn't
interact well with token caching in the pre-processor. As a result,
clang would crash on 'int f(::(id));' while doing a tenative parse of
the contents of the outer parentheses. The original code from PR11852
still doesn't crash the compiler.
This error recovery also often does the wrong thing with member function
pointers. The test case from the original PR doesn't recover the right
way either:
void S::(*pf)() = S::f; // should be 'void (S::*pf)()'
Instead we were recovering as 'void S::*pf()', which is still wrong.
If we still think that users mistakenly parenthesize identifiers in
nested name specifiers, we should change clang to intentionally parse
that form with an error, rather than doing a token rewrite.
Fixes PR26623, but I think there will be many more bugs like this around
token rewriting in the parser.
Reid Kleckner [Fri, 9 Dec 2016 19:47:58 +0000 (19:47 +0000)]
Improve error message when referencing a non-tag type with a tag
Other compilers accept invalid code here that we reject, and we need a
better error message to try to convince users that the code is really
incorrect. Consider:
class Foo {
typedef MyIterHelper<Foo> iterator;
friend class iterator;
};
Previously our wording was "elaborated type refers to a typedef".
"elaborated type" isn't widely known terminology, so the new diagnostic
says "typedef 'iterator' cannot be referenced with class specifier".
Yaxun Liu [Fri, 9 Dec 2016 19:01:11 +0000 (19:01 +0000)]
Add support for non-zero null pointer for C and OpenCL
In amdgcn target, null pointers in global, constant, and generic address space take value 0 but null pointers in private and local address space take value -1. Currently LLVM assumes all null pointers take value 0, which results in incorrectly translated IR. To workaround this issue, instead of emit null pointers in local and private address space, a null pointer in generic address space is emitted and casted to local and private address space.
Tentative definition of global variables with non-zero initializer will have weak linkage instead of common linkage since common linkage requires zero initializer and does not have explicit section to hold the non-zero value.
Virtual member functions getNullPointer and performAddrSpaceCast are added to TargetCodeGenInfo which by default returns ConstantPointerNull and emitting addrspacecast instruction. A virtual member function getNullPointerValue is added to TargetInfo which by default returns 0. Each target can override these virtual functions to get target specific null pointer and the null pointer value for specific address space, and perform specific translations for addrspacecast.
Wrapper functions getNullPointer is added to CodegenModule and getTargetNullPointerValue is added to ASTContext to facilitate getting the target specific null pointers and their values.
This change has no effect on other targets except amdgcn target. Other targets can provide support of non-zero null pointer in a similar way.
This change only provides support for non-zero null pointer for C and OpenCL. Supporting for other languages will be added later incrementally.
Richard Smith [Fri, 9 Dec 2016 18:49:13 +0000 (18:49 +0000)]
DR1295 and cleanup for P0135R1: Make our initialization code more directly
mirror the description in the standard. Per DR1295, this means that binding a
const / rvalue reference to a bit-field no longer "binds directly", and per
P0135R1, this means that we materialize a temporary in reference binding
after adjusting cv-qualifiers and before performing a derived-to-base cast.
In C++11 onwards, this should have fixed the last case where we would
materialize a temporary of the wrong type (with a subobject adjustment inside
the MaterializeTemporaryExpr instead of outside), but we still have to deal
with that possibility in C++98, unless we want to start using xvalues to
represent materialized temporaries there too.
[DOXYGEN] Improved doxygen comments for x86 intrinsics headers.
Tagged instruction names with <c> INSTR_NAME </c> to display them in typewriter font.
In the past, \c command was used, unfortunately it applied to only one word.
<c> .. </c> has the same meaning, but applies to all words in between the tags.
Nico Weber [Fri, 9 Dec 2016 17:32:52 +0000 (17:32 +0000)]
Don't assert when redefining a built-in macro in a PCH, PR29119
PCH files store the macro history for a given macro, and the whole history list
for one identifier is given to the Preprocessor at once via
Preprocessor::setLoadedMacroDirective(). This contained an assert that no macro
history exists yet for that identifier. That's usually true, but it's not true
for builtin macros, which are created in Preprocessor() before flags and pchs
are processed. Luckily, ASTWriter stops writing macro history lists at builtins
(see shouldIgnoreMacro() in ASTWriter.cpp), so the head of the history list was
missing for builtin macros. So make the assert weaker, and splice the history
list to the existing single define for builtins.
Reid Kleckner [Fri, 9 Dec 2016 17:14:05 +0000 (17:14 +0000)]
Store decls in prototypes on the declarator instead of in the AST
This saves two pointers from FunctionDecl that were being used for some
rare and questionable C-only functionality. The DeclsInPrototypeScope
ArrayRef was added in r151712 in order to parse this kind of C code:
enum e {x, y};
int f(enum {y, x} n) {
return x; // should return 1, not 0
}
The challenge is that we parse 'int f(enum {y, x} n)' it its own
function prototype scope that gets popped before we build the
FunctionDecl for 'f'. The original change was doing two questionable
things:
1. Saving all tag decls introduced in prototype scope on a TU-global
Sema variable. This is problematic when you have cases like this, where
'x' and 'y' shouldn't be visible in 'f':
void f(void (*fp)(enum { x, y } e)) { /* no x */ }
This patch fixes that, so now 'f' can't see 'x', which is consistent
with GCC.
2. Storing the decls in FunctionDecl in ActOnFunctionDeclarator so that
they could be used in ActOnStartOfFunctionDef. This is just an
inefficient way to move information around. The AST lives forever, but
the list of non-parameter decls in prototype scope is short lived.
Moving these things to the Declarator solves both of these issues.
[CrashReproducer] Provide a clean dir path for -fmodules-cache-path
The most common workflow with module reproducers involves deleting the
module cache before running the script. This happens because leftovers
from the crash are present in the cache and could trigger unrelated and
confusing errors, misleading from the initial reproduction intent.
Change this to point to a clean path but leave the leftovers untouched.
When -fmodules is on, the reproducer invocation currently leave paths
for include-like flags as is. If the path is relative, the reproducer
doesn't know how to access that file during reproduction time because
the VFS cannot reason about relative paths.
Expand relative paths to absolute ones when creating the reproducer
command line. This allows, for example, the reproducer to work for
crashes while building clang with modules; this wasn't possible before
because building clang requires using relative inc dir from within the
build directory.
Paul Robinson [Fri, 9 Dec 2016 01:20:40 +0000 (01:20 +0000)]
Specify -std=gnu++98 on some Rewriter tests. NFC.
Rewriter tests rewrite Objective-C++ to C++, and then compile the
result. The rewritten result sometimes doesn't work with C++11. As
we want to allow Clang's default dialect to become C++11, we need to
make sure the tests will still pass.
Improved doxygen comments for fxsrintrin.h and mmintrin.h intrinsics by taagging parameter names with \a doxygen command to display parameters in italics.
David Gross [Thu, 8 Dec 2016 21:15:17 +0000 (21:15 +0000)]
[DebugInfo] Relax test case for long double constants.
Summary:
D27549 (partial fix for PR26619) emits a constant value in the debug
metadata for a floating-point static const that does not exceed 64
bits in size. The regression test accompanying that fix assumes that
a long double exceeds 64 bits in size and hence does not get a
constant value in the debug metadata. However, for some targets --
such as "--target=hexagon-unknown-elf" -- a long double does not
exceed 64 bits in size, and hence the test fails.
As a temporary fix, modify the regression test to no longer inspect
the debug metadata for a long double.
David Gross [Thu, 8 Dec 2016 20:02:46 +0000 (20:02 +0000)]
[DebugInfo] Add support for __fp16, float, and double constants.
Summary:
Partial fix for PR26619.
Prior to this change, a DIGlobalVariable corresponding to a static
const was marked with an expression corresponding to its constant
value only if it is of integral type. With this change, we now do the
same if it is of __fp16, float, or double type (that is,
floating-point types that do not exceed 64 bits in size, and hence are
supported easily by the existing LLVM machinery for creating constant
expressions in debug info).
Artem Belevich [Thu, 8 Dec 2016 19:38:13 +0000 (19:38 +0000)]
[CUDA] Ignore implicit target attributes during function template instantiation.
Some functions and templates are treated as __host__ __device__ even
when they don't have explicitly specified target attributes.
What's worse, this treatment may change depending on command line
options (-fno-cuda-host-device-constexpr) or
#pragma clang force_cuda_host_device.
Combined with strict checking for matching function target that comes
with D25809(r288962), it makes it hard to write code which would
explicitly instantiate or specialize some functions regardless of
pragmas or command line options in effect.
This patch changes the way we match target attributes of base template
vs attributes used in explicit instantiation or specialization so that
only explicitly specified attributes are considered. This makes base
template selection behave consistently regardless of pragma of command
line options that may affect CUDA target.
Improved doxygen comments for __wmmintrin_pclmul.h and ammintrin.h intrinsics by taagging parameter names with \a doxygen command to display parameters in italics.
Alex Lorenz [Thu, 8 Dec 2016 15:09:40 +0000 (15:09 +0000)]
[CodeCompletion] Provide Objective-C class property completion results
This commit provides class property code completion results. It supports
explicit and implicit class properties, but the special block completion is done
only for explicit properties right now.
Alex Lorenz [Thu, 8 Dec 2016 14:46:05 +0000 (14:46 +0000)]
[Sema] Avoid "case value not in enumerated type" warning for C++11 opaque enums
This commit ensures that the switch warning "case value not in enumerated type"
isn't shown for opaque enums. We don't know the actual list of values in opaque
enums, so that warning is incorrect.
Artem Dergachev [Thu, 8 Dec 2016 14:05:48 +0000 (14:05 +0000)]
[analyzer] Add dispatch_data_create as a special case in RetainCountChecker.
This function receives a callback block. The analyzer suspects that this block
may be used to take care of releasing the libdispatch object returned from
the function. In fact, it doesn't - it only releases the raw data buffer.
Inform the analyzer about that. Fixes the resulting false negatives.
Richard Smith [Thu, 8 Dec 2016 03:24:55 +0000 (03:24 +0000)]
[c++1z] P0490R0, NB comment GB 20: if std::tuple_size<T> is complete, use the
tuple-like interpretation of decomposition declaration even if there is no
::value member. We already did this, anticipating this resolution, just update
comments and tweak a testcase.
We continue to support dynamic exception specifications in C++1z as an
extension, but produce an error-by-default warning when we encounter one. This
allows users to opt back into the feature with a warning flag, and implicitly
opts system headers back into the feature should they happen to use it.
There is one semantic change implied by P0003R5 but not implemented here:
violating a throw() exception specification should now call std::terminate
directly instead of calling std::unexpected(), but since P0003R5 also removes
std::unexpected() and std::set_unexpected, and the default unexpected handler
calls std::terminate(), a conforming C++1z program cannot tell that we are
still calling it. The upside of this strategy is perfect backwards
compatibility; the downside is that we don't get the more efficient 'noexcept'
codegen for 'throw()'.
David L. Jones [Wed, 7 Dec 2016 23:41:58 +0000 (23:41 +0000)]
Refactor how the MSVC toolchain searches for a compatibility version.
Summary:
The MSVC toolchain and Clang driver combination currently uses a fairly complex
sequence of steps to determine the MS compatibility version to pass to cc1.
There is some oddness in this sequence currently, with some code which inspects
flags in the toolchain, and some code which inspects the triple and local
environment in the driver code.
This change is an attempt to consolidate most of this logic so that
Win32-specific code lives in MSVCToolChain.cpp. I'm not 100% happy with the
split, so any suggestions are welcome.
There are a few things you might want to watch for for specifically:
- On all platforms, if MSVC compatibility flags are provided (and valid), use
those.
- The fallback sequence should be the same as before, but is now consolidated
into MSVCToolChain::getMSVCVersion:
- Otherwise, try to use the Triple.
- Otherwise, on Windows, check the executable.
- Otherwise, on Windows or with --fms-extensions, default to 18.
- Otherwise, we can't determine the version.
- MSVCToolChain::ComputeEffectiveTriple no longer calls the base
ToolChain::ComputeEffectiveClangTriple. The only thing it would change for
Windows the architecture, which we don't care about for the compatibility
version.
- I'm not sure whether this is philosophically correct (but it should
be easy to add back to MSVCToolChain::getMSVCVersionFromTriple if not).
- Previously, Tools.cpp just called getTriple() anyhow, so it doesn't look
like the effective triple was always being used previously anyhow.
David L. Jones [Wed, 7 Dec 2016 23:39:44 +0000 (23:39 +0000)]
Add more tests for MSVC version handling.
Summary:
This change adds more test cases for the default MSVC compatibility version:
1. When -fms-extensions is supplied, but -fmsc-version and
-fms-compatibility-version are not.
2. With the target triple specifies an MSVC environment, but no other
-fms* flags.
Artem Belevich [Wed, 7 Dec 2016 19:27:16 +0000 (19:27 +0000)]
[CUDA] Improve target attribute checking for function templates.
* __host__ __device__ functions are no longer considered to be
redeclarations of __host__ or __device__ functions. This prevents
unintentional merging of target attributes across them.
* Function target attributes are not considered (and must match) during
explicit instantiation and specialization of function templates.
Alex Lorenz [Wed, 7 Dec 2016 10:52:18 +0000 (10:52 +0000)]
Implement the -Wstrict-prototypes warning
This commit fixes PR20796. It implements the C only -Wstrict-prototypes warning.
Clang now emits a warning for function declarations which have no parameters
specified and for K&R function definitions with more than 0 parameters that are
not preceded by a previous prototype declaration.
Alex Lorenz [Wed, 7 Dec 2016 10:24:44 +0000 (10:24 +0000)]
[ObjC++] Don't enter a C++ declarator scope when the current context is
an Objective-C declaration
This commit ensures that Sema won't enter a C++ declarator scope when the
current context is an Objective-C declaration. This prevents an assertion
failure in EnterDeclaratorContext that's used to ensure that current context
will be restored correctly after exiting the declarator context.
Sam McCall [Wed, 7 Dec 2016 09:19:07 +0000 (09:19 +0000)]
Compilation database test: don't try to output to CWD
Summary:
Write output from compilation database test to %T rather than the working dir.
Sometimes CWD isn't writable!
Also specify no-canonical-prefixes so that clang has 'clang' in the name.
As a first step toward removing Objective-C garbage collection from
Clang, remove support from the driver. I'm hoping this will flush out
any expected bots/configurations/whatever that might rely on it.
I've left the options behind temporarily in -cc1 to keep tests passing.
I'll kill them off entirely in a follow up when I've had a chance to
update/delete the rest of Clang.
Erich Keane [Wed, 7 Dec 2016 00:21:45 +0000 (00:21 +0000)]
[MS-ABI]V-base dtor called more than needed when throw happens in v-base ctor in window. Need add "complete object flag" check in eh cleanup code.
The problem only happen on window ( A MS-ABI issuer )
The nature of the problem is virtual base dtor called more than it is needed after exception throw in inheriting base class(with virtual bases) ctor.
The root problem is when throw happen, not all virtual base classes have been contructed, so not all virtual base dtors are need to call for ehcleanup.
clang has code to handle vbase initialization: basically add check for "complete object flag" before call to v-base ctor.
But that part is missing for cleanup code.
To fix this add similar code as v-base init to cleanup code, same algorithm.
1> Add new routine:
EmitDtorCompleteObjectHandler
With corresponding to EmitCtorCompleteObjectHandler
2> In the EmitDestructorCal
Call EmitDtorCompleteObjectHandler when generate ehcleanup inside ctor.
Just add check for "complete object flag" before call to v-base dtor.
Without my change:
ehcleanup: ; preds = %ctor.skip_vbases
Richard Smith [Tue, 6 Dec 2016 23:52:28 +0000 (23:52 +0000)]
[c++17] P0135R1: Guaranteed copy elision.
When an object of class type is initialized from a prvalue of the same type
(ignoring cv qualifications), use the prvalue to initialize the object directly
instead of inserting a redundant elidable call to a copy constructor.
Reid Kleckner [Tue, 6 Dec 2016 21:44:41 +0000 (21:44 +0000)]
Disable -Wweak-vtables when there are no key functions
Our -Wweak-vtables diagnostic is powered by our key function
calculation, which checks if key functions are enabled. We won't find
any key functions in C++ ABIs that lack key functions, so -Wweak-vtables
was warning on every dynamic class before this change. So, turn off this
warning in ABIs without key functions.
Allow additional output since e.g. OSX appends flags like
"-mlinker-version=264.3.102" automatically. Wiring down a target on the
other hand is problematic as this actually needs to run codegen and
doesn't work with -###.
Allow clang to write compilation database records.
When integrating compilation database output into existing build
systems, two approaches dominate so far. Ad-hoc implementation of the
JSON output rules or using compiler wrappers. This patch adds a new
option "-MJ foo.json" which gives a slightly cleaned up compilation
record. The output is a fragment, i.e. you still need to add the array
markers, but it allows multiple files to be easy merged.
This way the only change in a build system is adding the option with
potentially a per-target output file and merging the files with
something like
(echo '['; cat *.o.json; echo ']' > compilation_database.json
or some additional filtering to remove the trailing comma for strict
JSON compliance.
Richard Trieu [Tue, 6 Dec 2016 01:42:28 +0000 (01:42 +0000)]
Clean up some Sema checking code. NFC
- Rename CheckMinZero to CheckMaxUnsignedZero to reflect its actual purpose.
- Remove unused parameters from CheckAbsoluteValueFunction and
CheckMaxUnsignedZero functions.
- Refactor the function name check so both functions can use the same one.
Richard Smith [Tue, 6 Dec 2016 00:40:17 +0000 (00:40 +0000)]
Revert r288626, which reverts r288449. Original commit message:
Recover better from an incompatible .pcm file being provided by -fmodule-file=. We try to include the headers of the module textually in this case, still enforcing the modules semantic rules. In order to make that work, we need to still track that we're entering and leaving the module. Also, if the module was also marked as unavailable (perhaps because it was missing a file), we shouldn't mark the module unavailable -- we don't need the module to be complete if we're going to enter it textually.
Richard Smith [Tue, 6 Dec 2016 00:12:39 +0000 (00:12 +0000)]
[modules] Use the "redundant #include" diagnostic rather than the "module
import can't appear here" diagnostic if an already-visible module is textually
entered (because we have the module map but not the AST file) within a
function/namespace scope.
Richard Trieu [Mon, 5 Dec 2016 23:41:46 +0000 (23:41 +0000)]
Warn on unsigned zero in call to std::max
New default warning that triggers when an unsigned zero is used in a call to
std::max. For unsigned values, zero is the minimum value, so any call to
std::max is always equal to the other value. A common pattern was to take
the max of zero and the difference of two unsigned values, not taking into
account that unsigned values wrap around below zero. This warning also emits
a note with a fixit hint to remove the zero and call to std::max.
When emitting RTTI for EH only, we would mark the locally defined (LinkOnceODR)
RTTI definition as dllimport, which is incorrect. Ensure that if we are
generating the type information for EH only, it is marked as LinkOnceODR and we
do not make it dllimport.
Shoaib Meenai [Mon, 5 Dec 2016 18:01:35 +0000 (18:01 +0000)]
[Sema] Respect DLL attributes more faithfully
On MSVC, if an implicit instantiation already exists and an explicit
instantiation definition with a DLL attribute is created, the DLL
attribute still takes effect. Make clang match this behavior for
exporting.
Devin Coughlin [Mon, 5 Dec 2016 16:28:47 +0000 (16:28 +0000)]
[analyzer] ObjCGenerics: Warn only on mismatch for invariant type parameters
On a method call, the ObjCGenerics checker uses the type tracked by
DynamicTypePropagation for the receiver to to infer substituted parmeter types
for the called methods and warns when the argument type does not match the
parameter.
Unfortunately, using the tracked type can result in false positives when the
receiver has a non-invariant type parameter and has been intentionally upcast.
For example, becaue NSArray's type parameter is covaraint, the following code
is perfectly safe:
Richard Smith [Mon, 5 Dec 2016 07:49:14 +0000 (07:49 +0000)]
DR1213: element access on an array xvalue or prvalue produces an xvalue. In the
latter case, a temporary array object is materialized, and can be
lifetime-extended by binding a reference to the member access. Likewise, in an
array-to-pointer decay, an rvalue array is materialized before being converted
into a pointer.
This caused IR generation to stop treating file-scope array compound literals
as having static storage duration in some cases in C++; that has been rectified
by modeling such a compound literal as an lvalue. This also improves clang's
compatibility with GCC for those cases.
Daniel Jasper [Sun, 4 Dec 2016 22:34:37 +0000 (22:34 +0000)]
Revert "Recover better from an incompatible .pcm file being provided by -fmodule-file=. We try to include the headers of the module textually in this case, still enforcing the modules semantic rules. In order to make that work, we need to still track that we're entering and leaving the module. Also, if the module was also marked as unavailable (perhaps because it was missing a file), we shouldn't mark the module unavailable -- we don't need the module to be complete if we're going to enter it textually."
This reverts commit r288449.
I believe that this is currently faulty wrt. modules being imported
inside namespaces. Adding these lines to the new test:
namespace n {
#include "foo.h"
}
Makes it break with
fatal error: import of module 'M' appears within namespace 'n'
However, I believe it should fail with
error: redundant #include of module 'M' appears within namespace 'n'
I have tracked this down to us now inserting a tok::annot_module_begin
instead of a tok::annot_module_include in
Preprocessor::HandleIncludeDirective() and then later in
Parser::parseMisplacedModuleImport(), we hit the code path for
tok::annot_module_begin, which doesn't set FromInclude of
checkModuleImportContext to true (thus leading to the "wrong"
diagnostic).
An explicit template specialization can cause the implicit template
specialization of a type which inherits the attributes. In such a case, we
would end up with a delayed template specialization for a dll exported type
which we would fail to reference. This would trigger an assertion.
We now propagate the dll storage attributes through the inheritance
chain. Only after having done so do we reference the delayed template
specializations. This allows any implicit specializations which inherit dll
storage to also be referenced.
Eric Fiselier [Sat, 3 Dec 2016 01:26:47 +0000 (01:26 +0000)]
[Sema] Don't perform aggregate initialization for types with explicit constructors
Summary:
The C++17 rules for aggregate initialization changed to disallow types with explicit constructors [dcl.init.aggr]p1. This patch implements that new rule.
Richard Smith [Sat, 3 Dec 2016 01:14:32 +0000 (01:14 +0000)]
DR616, and part of P0135R1: member access (or pointer-to-member access) on a
temporary produces an xvalue, not a prvalue. Support this by materializing the
temporary prior to performing the member access.
Richard Smith [Sat, 3 Dec 2016 00:29:06 +0000 (00:29 +0000)]
PR31244: Use the exception specification from the callee's type directly to
compute whether a call is noexcept, even if we can't map the callee expression
to a called declaration.
Richard Smith [Fri, 2 Dec 2016 23:00:28 +0000 (23:00 +0000)]
More diagnostic name fixups: w_ -> warn_, warning_ -> warn_, not_ -> note_.
In passing, add a warning group for "ignored qualifier in inline assembly" warnings.
CodeGen: export typeinfo and typeinfo name on itanium
When a C++ record is marked with dllexport mark both the typeinfo and the
typeinfo name as being exported. Handle dllimport as the inverse. This applies
to the itanium environment and not the MinGW environment.
projects / clang / log