James Molloy [Wed, 9 Oct 2019 09:15:34 +0000 (09:15 +0000)]
[TableGen] Fix crash when using HwModes in CodeEmitterGen
When an instruction has an encoding definition for only a subset of
the available HwModes, ensure we just avoid generating an encoding
rather than crash.
Hans Wennborg [Wed, 9 Oct 2019 09:06:30 +0000 (09:06 +0000)]
Unify the two CRC implementations
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
[dsymutil] Fix handling of common symbols in multiple object files.
For common symbols the linker emits only a single symbol entry in the
debug map. This caused dsymutil to not relocate common symbols when
linking DWARF coming form object files that did not have this entry.
This patch fixes that by keeping track of common symbols in the object
files and synthesizing a debug map entry for them using the address from
the main binary.
The verbose output for finding relocations assumed that we'd always dump
the DIE after (which starts with a newline) and therefore didn't include
one itself. However, this isn't always true, leading to garbled output.
This patch adds a newline to the verbose output and adds a line that
says that the DIE is being kept (which isn't obvious otherwise). It also
adds a 0x prefix to the relocations.
Roman Lebedev [Tue, 8 Oct 2019 20:29:48 +0000 (20:29 +0000)]
[CVP} Replace SExt with ZExt if the input is known-non-negative
Summary:
zero-extension is far more friendly for further analysis.
While this doesn't directly help with the shift-by-signext problem, this is not unrelated.
TLDR: we produce -0.11% less instructions, -6.84% less `sext`, +10.75% more `zext`.
To be noted, clearly, not all new `zext`'s are produced by this fold.
(And now i guess it might have been interesting to measure this for D68103 :S)
Daniel Sanders [Tue, 8 Oct 2019 18:41:32 +0000 (18:41 +0000)]
[tblgen] Add getOperatorAsDef() to Record
Summary:
While working with DagInit's, it's often the case that you expect the
operator to be a reference to a def. This patch adds a wrapper for this
common case to reduce the amount of boilerplate callers need to duplicate
repeatedly.
getOperatorAsDef() returns the record if the DagInit has an operator that is
a DefInit. Otherwise, it prints a fatal error.
There's only a few pre-existing examples in LLVM at the moment and I've
left a few instances of the code this simplifies as they had more specific
error messages than the generic one this produces. I'm going to be using
this a fair bit in my subsequent patches.
Yonghong Song [Tue, 8 Oct 2019 18:23:17 +0000 (18:23 +0000)]
[BPF] do compile-once run-everywhere relocation for bitfields
A bpf specific clang intrinsic is introduced:
u32 __builtin_preserve_field_info(member_access, info_kind)
Depending on info_kind, different information will
be returned to the program. A relocation is also
recorded for this builtin so that bpf loader can
patch the instruction on the target host.
This clang intrinsic is used to get certain information
to facilitate struct/union member relocations.
The offset relocation is extended by 4 bytes to
include relocation kind.
Currently supported relocation kinds are
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
for __builtin_preserve_field_info. The old
access offset relocation is covered by
FIELD_BYTE_OFFSET = 0.
An example:
struct s {
int a;
int b1:9;
int b2:4;
};
enum {
FIELD_BYTE_OFFSET = 0,
FIELD_BYTE_SIZE,
FIELD_EXISTENCE,
FIELD_SIGNEDNESS,
FIELD_LSHIFT_U64,
FIELD_RSHIFT_U64,
};
void bpf_probe_read(void *, unsigned, const void *);
int field_read(struct s *arg) {
unsigned long long ull = 0;
unsigned offset = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_OFFSET);
unsigned size = __builtin_preserve_field_info(arg->b2, FIELD_BYTE_SIZE);
#ifdef USE_PROBE_READ
bpf_probe_read(&ull, size, (const void *)arg + offset);
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#if __BYTE_ORDER__ == __ORDER_BIG_ENDIAN__
lshift = lshift + (size << 3) - 64;
#endif
#else
switch(size) {
case 1:
ull = *(unsigned char *)((void *)arg + offset); break;
case 2:
ull = *(unsigned short *)((void *)arg + offset); break;
case 4:
ull = *(unsigned int *)((void *)arg + offset); break;
case 8:
ull = *(unsigned long long *)((void *)arg + offset); break;
}
unsigned lshift = __builtin_preserve_field_info(arg->b2, FIELD_LSHIFT_U64);
#endif
ull <<= lshift;
if (__builtin_preserve_field_info(arg->b2, FIELD_SIGNEDNESS))
return (long long)ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
return ull >> __builtin_preserve_field_info(arg->b2, FIELD_RSHIFT_U64);
}
There is a minor overhead for bpf_probe_read() on big endian.
The code and relocation generated for field_read where bpf_probe_read() is
used to access argument data on little endian mode:
r3 = r1
r1 = 0
r1 = 4 <=== relocation (FIELD_BYTE_OFFSET)
r3 += r1
r1 = r10
r1 += -8
r2 = 4 <=== relocation (FIELD_BYTE_SIZE)
call bpf_probe_read
r2 = 51 <=== relocation (FIELD_LSHIFT_U64)
r1 = *(u64 *)(r10 - 8)
r1 <<= r2
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
r0 = r1
r0 >>= r2
r3 = 1 <=== relocation (FIELD_SIGNEDNESS)
if r3 == 0 goto LBB0_2
r1 s>>= r2
r0 = r1
LBB0_2:
exit
Compare to the above code between relocations FIELD_LSHIFT_U64 and
FIELD_LSHIFT_U64, the code with big endian mode has four more
instructions.
r1 = 41 <=== relocation (FIELD_LSHIFT_U64)
r6 += r1
r6 += -64
r6 <<= 32
r6 >>= 32
r1 = *(u64 *)(r10 - 8)
r1 <<= r6
r2 = 60 <=== relocation (FIELD_RSHIFT_U64)
Considering verifier is able to do limited constant
propogation following branches. The following is the
code actually traversed.
r2 = 0
r3 = 4 <=== relocation
r4 = 4 <=== relocation
if r4 s> 3 goto LBB0_3
LBB0_3: # %entry
if r4 == 4 goto LBB0_7
LBB0_7: # %sw.bb5
r1 += r3
r2 = *(u32 *)(r1 + 0)
LBB0_9: # %sw.epilog
r1 = 51 <=== relocation
r2 <<= r1
r1 = 60 <=== relocation
r0 = r2
r0 >>= r1
r3 = 1
if r3 == 0 goto LBB0_11
r2 s>>= r1
r0 = r2
LBB0_11: # %sw.epilog
exit
For native load case, the load size is calculated to be the
same as the size of load width LLVM otherwise used to load
the value which is then used to extract the bitfield value.
Matt Arsenault [Tue, 8 Oct 2019 17:36:38 +0000 (17:36 +0000)]
AMDGPU: Fix i16 arithmetic pattern redundancy
There were 2 problems here. First, these patterns were duplicated to
handle the inverted shift operands instead of using the commuted
PatFrags.
Second, the point of the zext folding patterns don't apply to the
non-0ing high subtargets. They should be skipped instead of inserting
the extension. The zeroing high code would be emitted when necessary
anyway. This was also emitting unnecessary zexts in cases where the
high bits were undefined.
Testing: check-llvm, and comparing the AMDGPUDisassembler.cpp.o binary
pre- vs. post-patch.
An alternate approach is to hide CodeExtractorAnalysisCache from clients
of CodeExtractor, and to recompute the analysis from scratch inside of
CodeExtractor::extractCodeRegion(). This eliminates some redundant work
in the shrinkwrapping legality check. However, some clients continue to
exhibit O(n^2) compile time behavior as computing the analysis is O(n).
Tom Stellard [Tue, 8 Oct 2019 17:04:51 +0000 (17:04 +0000)]
AMDGPU: Add offsets to MMO when lowering buffer intrinsics
Summary:
Without offsets on the MachineMemOperands (MMOs),
MachineInstr::mayAlias() will return true for all reads and writes to the
same resource descriptor. This leads to O(N^2) complexity in the MachineScheduler
when analyzing dependencies of buffer loads and stores. It also limits
the SILoadStoreOptimizer from merging more instructions.
This patch reduces the compile time of one pathological compute shader
from 12 seconds to 1 second.
Hideto Ueno [Tue, 8 Oct 2019 17:01:56 +0000 (17:01 +0000)]
[Attributor][Fix] Temporary fix for windows build bot failure
D65402 causes test failure related to attributor-max-iterations.
This commit removes attributor-max-iterations-verify for now.
I'll examine the factor and the flag should be reverted.
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<> directly and if not assert will fire for us.
Inhibit generation of unused real dpp instructions on gfx10 just
like it is done on other subtargets. This does not change anything
because these are illegal anyway and not accepted, but it does
reduce the number of instruction definitions generated.
David Greene [Tue, 8 Oct 2019 16:25:42 +0000 (16:25 +0000)]
[UpdateCCTestChecks] Detect function mangled name on separate line
Sometimes functions with large comment blocks in front of them have their
declarations output on several lines by c-index-test. Hence the one-line
function name/line/mangled pattern will not work to detect them. Break the
pattern up into two patterns and keep state after seeing the name/line
information until we finally see the mangled name.
Roman Lebedev [Tue, 8 Oct 2019 16:21:13 +0000 (16:21 +0000)]
[NFC][CVP] Add tests where we can replace sext with zext
If the sign bit of the value that is being sign-extended is not set,
i.e. the value is non-negative (s>= 0), then zero-extension will suffice,
and is better for analysis: https://rise4fun.com/Alive/a8PD
Heejin Ahn [Tue, 8 Oct 2019 16:15:39 +0000 (16:15 +0000)]
[WebAssembly] Fix a bug in 'try' placement
Summary:
When searching for local expression tree created by stackified
registers, for 'block' placement, we start the search from the previous
instruction of a BB's terminator. But in 'try''s case, we should start
from the previous instruction of a call that can throw, or a EH_LABEL
that precedes the call, because the return values of the call's previous
instructions can be stackified and consumed by the throwing call.
For example,
```
i32.call @foo
call @bar ; may throw
br $label0
```
In this case, if we start the search from the previous instruction of
the terminator (`br` here), we end up stopping at `call @bar` and place
a 'try' between `i32.call @foo` and `call @bar`, because `call @bar`
does not have a return value so it is not a local expression tree of
`br`.
But in this case, unlike when placing 'block's, we should start the
search from `call @bar`, because the return value of `i32.call @foo` is
stackified and used by `call @bar`.
Hideto Ueno [Tue, 8 Oct 2019 15:25:56 +0000 (15:25 +0000)]
[Attributor][MustExec] Deduce dereferenceable and nonnull attribute using MustBeExecutedContextExplorer
Summary:
In D65186 and related patches, MustBeExecutedContextExplorer is introduced. This enables us to traverse instructions guaranteed to execute from function entry. If we can know the argument is used as `dereferenceable` or `nonnull` in these instructions, we can mark `dereferenceable` or `nonnull` in the argument definition:
1. Memory instruction (similar to D64258)
Trace memory instruction pointer operand. Currently, only inbounds GEPs are traced.
```
define i64* @f(i64* %a) {
entry:
%add.ptr = getelementptr inbounds i64, i64* %a, i64 1
; (because of inbounds GEP we can know that %a is at least dereferenceable(16))
store i64 1, i64* %add.ptr, align 8
ret i64* %add.ptr ; dereferenceable 8 (because above instruction stores into it)
}
```
2. Propagation from callsite (similar to D27855)
If `deref` or `nonnull` are known in call site parameter attributes we can also say that argument also that attribute.
Hideto Ueno [Tue, 8 Oct 2019 15:20:19 +0000 (15:20 +0000)]
[Attributor] Add helper class to compose two structured deduction.
Summary: This patch introduces a generic way to compose two structured deductions. This will be used for composing generic deduction with `MustBeExecutedExplorer` and other existing generic deduction.
Cyndy Ishida [Tue, 8 Oct 2019 15:07:36 +0000 (15:07 +0000)]
[TextAPI] Introduce TBDv4
Summary:
This format introduces new features and platforms
The motivation for this format is to support more than 1 platform since previous versions only supported additional architectures and 1 platform,
for example ios + ios-simulator and macCatalyst.
Mirko Brkusanin [Tue, 8 Oct 2019 14:32:03 +0000 (14:32 +0000)]
[Mips] Emit proper ABI for _mcount calls
When -pg option is present than a call to _mcount is inserted into every
function. However since the proper ABI was not followed then the generated
gmon.out did not give proper results. By inserting needed instructions
before every _mcount we can fix this.
Pavel Labath [Tue, 8 Oct 2019 14:15:32 +0000 (14:15 +0000)]
Object/minidump: Add support for the MemoryInfoList stream
Summary:
This patch adds the definitions of the constants and structures
necessary to interpret the MemoryInfoList minidump stream, as well as
the object::MinidumpFile interface to access the stream.
While the code is fairly simple, there is one important deviation from
the other minidump streams, which is worth calling out explicitly.
Unlike other "List" streams, the size of the records inside
MemoryInfoList stream is not known statically. Instead it is described
in the stream header. This makes it impossible to return
ArrayRef<MemoryInfo> from the accessor method, as it is done with other
streams. Instead, I create an iterator class, which can be parameterized
by the runtime size of the structure, and return
iterator_range<iterator> instead.
Kevin P. Neal [Tue, 8 Oct 2019 14:10:26 +0000 (14:10 +0000)]
Nope, I'm wrong. It looks like someone else removed these on purpose and
it just happened to break the bot right when I did my push. So I'm undoing
this mornings incorrect push. I've also kicked off an email to hopefully
get the bot fixed the correct way.
Sebastian Pop [Tue, 8 Oct 2019 13:23:57 +0000 (13:23 +0000)]
fix fmls fp16
Tim Northover remarked that the added patterns for fmls fp16
produce wrong code in case the fsub instruction has a
multiplication as its first operand, i.e., all the patterns FMLSv*_OP1:
> define <8 x half> @test_FMLSv8f16_OP1(<8 x half> %a, <8 x half> %b, <8 x half> %c) {
> ; CHECK-LABEL: test_FMLSv8f16_OP1:
> ; CHECK: fmls {{v[0-9]+}}.8h, {{v[0-9]+}}.8h, {{v[0-9]+}}.8h
> entry:
>
> %mul = fmul fast <8 x half> %c, %b
> %sub = fsub fast <8 x half> %mul, %a
> ret <8 x half> %sub
> }
>
> This doesn't look right to me. The exact instruction produced is "fmls
> v0.8h, v2.8h, v1.8h", which I think calculates "v0 - v2*v1", but the
> IR is calculating "v2*v1-v0". The equivalent <4 x float> code also
> doesn't emit an fmls.
This patch generates an fmla and negates the value of the operand2 of the fsub.
Inspecting the pattern match, I found that there was another mistake in the
opcode to be selected: matching FMULv4*16 should generate FMLSv4*16
and not FMLSv2*32.
Graham Hunter [Tue, 8 Oct 2019 12:53:54 +0000 (12:53 +0000)]
[SVE][IR] Scalable Vector size queries and IR instruction support
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Nicolai Haehnle [Tue, 8 Oct 2019 12:46:20 +0000 (12:46 +0000)]
MachineSSAUpdater: insert IMPLICIT_DEF at top of basic block
Summary:
When getValueInMiddleOfBlock happens to be called for a basic block
that has no incoming value at all, an IMPLICIT_DEF is inserted in that
block via GetValueAtEndOfBlockInternal. This IMPLICIT_DEF must be at
the top of its basic block or it will likely not reach the use that
the caller intends to insert.
[MCA][LSUnit] Track loads and stores until retirement.
Before this patch, loads and stores were only tracked by their corresponding
queues in the LSUnit from dispatch until execute stage. In practice we should be
more conservative and assume that memory opcodes leave their queues at
retirement stage.
Basically, loads should leave the load queue only when they have completed and
delivered their data. We conservatively assume that a load is completed when it
is retired. Stores should be tracked by the store queue from dispatch until
retirement. In practice, stores can only leave the store queue if their data can
be written to the data cache.
This is mostly a mechanical change. With this patch, the retire stage notifies
the LSUnit when a memory instruction is retired. That would triggers the release
of LDQ/STQ entries. The only visible change is in memory tests for the bdver2
model. That is because bdver2 is the only model that defines the load/store
queue size.
Support for tracking registers that forward function parameters into the
following function frame. For now we only support cases when parameter
is forwarded through single register.
Clement Courbet [Tue, 8 Oct 2019 09:06:48 +0000 (09:06 +0000)]
[llvm-exegesis] Finish plumbing the `Config` field.
Summary:
Right now there are no snippet generators that emit the `Config` Field,
but I plan to add it to investigate LEA operands for PR32326.
What was broken was:
- `Config` Was not propagated up until the BenchmarkResult::Key.
- Clustering should really consider different configs as measuring
different things, so we should stabilize on (Opcode, Config) instead of
just Opcode.
Kristof Beyls [Tue, 8 Oct 2019 08:25:42 +0000 (08:25 +0000)]
[ARM] Generate vcmp instead of vcmpe
Based on the discussion in
http://lists.llvm.org/pipermail/llvm-dev/2019-October/135574.html, the
conclusion was reached that the ARM backend should produce vcmp instead
of vcmpe instructions by default, i.e. not be producing an Invalid
Operation exception when either arguments in a floating point compare
are quiet NaNs.
In the future, after constrained floating point intrinsics for floating
point compare have been introduced, vcmpe instructions probably should
be produced for those intrinsics - depending on the exact semantics
they'll be defined to have.
This patch logically consists of the following parts:
- Revert http://llvm.org/viewvc/llvm-project?rev=294945&view=rev and
http://llvm.org/viewvc/llvm-project?rev=294968&view=rev, which
implemented fine-tuning for when to produce vcmpe (i.e. not do it for
equality comparisons). The complexity introduced by those patches
isn't needed anymore if we just always produce vcmp instead. Maybe
these patches need to be reintroduced again once support is needed to
map potential LLVM-IR constrained floating point compare intrinsics to
the ARM instruction set.
- Simply select vcmp, instead of vcmpe, see simple changes in
lib/Target/ARM/ARMInstrVFP.td
- Adapt lots of tests that tested for vcmpe (instead of vcmp). For all
of these test, the intent of what is tested for isn't related to
whether the vcmp should produce an Invalid Operation exception or not.
Kai Nacke [Tue, 8 Oct 2019 08:21:20 +0000 (08:21 +0000)]
[Tools] Mark output of tools as text if it is text
Several LLVM tools write text files/streams without using OF_Text.
This can cause problems on platforms which distinguish between
text and binary output. This PR adds the OF_Text flag for the
following tools:
Bill Wendling [Tue, 8 Oct 2019 04:39:52 +0000 (04:39 +0000)]
[IA] Recognize hexadecimal escape sequences
Summary:
Implement support for hexadecimal escape sequences to match how GNU 'as'
handles them. I.e., read all hexadecimal characters and truncate to the
lower 16 bits.
Zi Xuan Wu [Tue, 8 Oct 2019 03:28:33 +0000 (03:28 +0000)]
[LoopVectorize][PowerPC] Estimate int and float register pressure separately in loop-vectorize
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Andrew Trick [Tue, 8 Oct 2019 01:31:02 +0000 (01:31 +0000)]
[LitConfig] Silenced notes/warnings on quiet.
Lit has a "quiet" option, -q, which is documented to "suppress no
error output". Previously, LitConfig displayed notes and warnings when
the quiet option was specified. The result was that it was not
possible to get only pertinent file/line information to be used by an
editor to jump to the location where checks were failing without
passing a number of unhelpful locations first. Here, the
implementations of LitConfig.note and LitConfig.warning are modified
to account for the quiet flag and avoid displaying if the flag has
indeed been set.
[Attributor][FIX] Remove initialize calls and add undefs
The initialization logic has become part of the Attributor but the
patches that introduced these calls here were in development when the
transition happened.
We also now clean up (undefine) the macros used to create attributes.
Craig Topper [Mon, 7 Oct 2019 23:03:12 +0000 (23:03 +0000)]
[X86] Shrink zero extends of gather indices from type less than i32 to types larger than i32.
Gather instructions can use i32 or i64 elements for indices. If
the index is zero extended from a type smaller than i32 to i64, we
can shrink the extend to just extend to i32.
Reid Kleckner [Mon, 7 Oct 2019 22:28:58 +0000 (22:28 +0000)]
[X86] Add new calling convention that guarantees tail call optimization
When the target option GuaranteedTailCallOpt is specified, calls with
the fastcc calling convention will be transformed into tail calls if
they are in tail position. This diff adds a new calling convention,
tailcc, currently supported only on X86, which behaves the same way as
fastcc, except that the GuaranteedTailCallOpt flag does not need to
enabled in order to enable tail call optimization.
Patch by Dwight Guth <dwight.guth@runtimeverification.com>!
Heejin Ahn [Mon, 7 Oct 2019 22:19:40 +0000 (22:19 +0000)]
[WebAssembly] Fix unwind mismatch stat computation
Summary:
There was a bug when computing the number of unwind destination
mismatches in CFGStackify. When there are many mismatched calls that
share the same (original) destination BB, they have to be counted
separately.
This also fixes a typo and runs `fixUnwindMismatches` only when the wasm
exception handling is enabled. This is to prevent unnecessary
computations and does not change behavior.
Heejin Ahn [Mon, 7 Oct 2019 21:14:45 +0000 (21:14 +0000)]
[WebAssembly] Add memory intrinsics handling to mayThrow()
Summary:
Previously, `WebAssembly::mayThrow()` assumed all inputs are global
addresses. But when intrinsics, such as `memcpy`, `memmove`, or `memset`
are lowered to external symbols in instruction selection and later
emitted as library calls. And these functions don't throw.
This patch adds handling to those memory intrinsics to `mayThrow`
function. But while most of libcalls don't throw, we can't guarantee all
of them don't throw, so currently we conservatively return true for all
other external symbols.
I think a better way to solve this problem is to embed 'nounwind' info
in `TargetLowering::CallLoweringInfo`, so that we can access the info
from the backend. This will also enable transferring 'nounwind'
properties of LLVM IR instructions. Currently we don't transfer that
info and we can only access properties of callee functions, if the
callees are within the module. Other targets don't need this info in the
backend because they do all the processing before isel, but it will help
us because that info will reduce code size increase in fixing unwind
destination mismatches in CFGStackify.
But for now we return false for these memory intrinsics and true for all
other libcalls conservatively.
[llvm-lipo] Relax the check of the specified input file architecture
cctools lipo only compares the cputypes when it verifies that
the specified (via -arch) input file and the architecture match.
This diff adjusts the behavior of llvm-lipo accordingly.
Roman Lebedev [Mon, 7 Oct 2019 20:53:27 +0000 (20:53 +0000)]
[InstCombine] Fold conditional sign-extend of high-bit-extract into high-bit-extract-with-signext (PR42389)
This can come up in Bit Stream abstractions.
The pattern looks big/scary, but it can't be simplified any further.
It only is so simple because a number of my preparatory folds had
happened already (shift amount reassociation / shift amount
reassociation in bit test, sign bit test detection).
Highlights:
* There are two main flavors: https://rise4fun.com/Alive/zWi
The difference is add vs. sub, and left-shift of -1 vs. 1
* Since we only change the shift opcode,
we can preserve the exact-ness: https://rise4fun.com/Alive/4u4
* There can be truncation after high-bit-extraction:
https://rise4fun.com/Alive/slHc1 (the main pattern i'm after!)
Which means that we need to ignore zext of shift amounts and of NBits.
* The sign-extending magic can be extended itself (in add pattern
via sext, in sub pattern via zext. not the other way around!)
https://rise4fun.com/Alive/NhG
(or those sext/zext can be sinked into `select`!)
Which again means we should pay attention when matching NBits.
* We can have both truncation of extraction and widening of magic:
https://rise4fun.com/Alive/XTw
In other words, i don't believe we need to have any checks on
bitwidths of any of these constructs.
This is worsened in general by the fact that we may have `sext` instead
of `zext` for shift amounts, and we don't yet canonicalize to `zext`,
although we should. I have not done anything about that here.
Also, we really should have something to weed out `sub` like these,
by folding them into `add` variant.
Roman Lebedev [Mon, 7 Oct 2019 20:53:08 +0000 (20:53 +0000)]
[InstCombine] Move isSignBitCheck(), handle rest of the predicates
True, no test coverage is being added here. But those non-canonical
predicates that are already handled here already have no test coverage
as far as i can tell. I tried to add tests for them, but all the patterns
already get handled elsewhere.
Roman Lebedev [Mon, 7 Oct 2019 20:53:00 +0000 (20:53 +0000)]
[InstCombine][NFC] dropRedundantMaskingOfLeftShiftInput(): change how we deal with mask
Summary:
Currently, we pre-check whether we need to produce a mask or not.
This involves some rather magical constants.
I'd like to extend this fold to also handle the situation
when there's also a `trunc` before outer shift.
That will require another set of magical constants.
It's ugly.
Instead, we can just compute the mask, and check
whether mask is a pass-through (all-ones) or not.
This way we don't need to have any magical numbers.
This change is NFC other than the fact that we now compute
the mask and then check if we need (and can!) apply it.
Summary:
When we do `ConstantExpr::getZExt()`, that "extends" `undef` to `0`,
which means that for patterns a/b we'd assume that we must not produce
any bits for that channel, while in reality we simply didn't care
about that channel - i.e. we don't need to mask it.
Matt Arsenault [Mon, 7 Oct 2019 19:16:26 +0000 (19:16 +0000)]
AMDGPU/GlobalISel: Handle more G_INSERT cases
Start manually writing a table to get the subreg index. TableGen
should probably generate this, but I'm not sure what it looks like in
the arbitrary case where subregisters are allowed to not fully cover
the super-registers.
Matt Arsenault [Mon, 7 Oct 2019 18:43:29 +0000 (18:43 +0000)]
GlobalISel: Add target pre-isel instructions
Allows targets to introduce regbankselectable
pseudo-instructions. Currently the closet feature to this is an
intrinsic. However this requires creating a public intrinsic
declaration. This litters the public intrinsic namespace with
operations we don't necessarily want to expose to IR producers, and
would rather leave as private to the backend.
Use a new instruction bit. A previous attempt tried to keep using enum
value ranges, but it turned into a mess.
Jordan Rose [Mon, 7 Oct 2019 18:14:24 +0000 (18:14 +0000)]
Second attempt to add iterator_range::empty()
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
projects / llvm / log