]>
granicus.if.org Git - libvpx/log
Ronald S. Bultje [Tue, 8 Sep 2015 18:20:48 +0000 (14:20 -0400)]
vp10: merge frame_parallel_decoding_mode and refresh_frame_context.
See issue 1030. The value of frame_parallel_decoding_mode was ignored
in vp9 if refresh_frame_context was 0, so instead make it a 3-member
enum where the dependency is obviously stated.
Change-Id: I37f0177e5759f54e2e6cc6217023d5681de92438
Ronald S. Bultje [Fri, 11 Sep 2015 23:33:12 +0000 (19:33 -0400)]
vpxdec: remove implied --output-bit-depth=8 for --yv12.
Change-Id: I28c939db49334572476aa2b428ec93111d4e869d
Ronald S. Bultje [Mon, 7 Sep 2015 14:14:18 +0000 (10:14 -0400)]
vp10: remove duplicate frame_parallel_decode field.
Keep the one in VP10_COMMON in favour of the one in VP10_DECODER.
Change-Id: Ia81983ccc95d83829dc815e28d9b1143e16e27b1
Ronald S. Bultje [Fri, 11 Sep 2015 20:55:19 +0000 (16:55 -0400)]
Don't convert bitdepth for !single-file or MD5.
... unless --output-bit-depth was set.
Change-Id: I3482eaf12e245eec24427518fccdd173f890f4b4
Ronald S. Bultje [Fri, 11 Sep 2015 22:36:49 +0000 (22:36 +0000)]
Merge "Make reset_frame_context an enum."
Marco Paniconi [Fri, 11 Sep 2015 21:39:06 +0000 (21:39 +0000)]
Merge "Avoid scaling last_source, unless needed."
Ronald S. Bultje [Tue, 8 Sep 2015 18:14:28 +0000 (14:14 -0400)]
Make reset_frame_context an enum.
In vp9, [0] and [1] had identical meaning, so merge them into a
single value. Make it impossible to code RESET_FRAME_CONTEXT_NONE
for intra_only frames, since that is a non-sensical combination.
See issue 1030.
Change-Id: If450c74162d35ca63a9d279beaa53ff9cdd6612b
Marco [Fri, 11 Sep 2015 18:23:26 +0000 (11:23 -0700)]
Avoid scaling last_source, unless needed.
Save some encoding time, for the case of spatial layers
or under dynamic resizing mode.
Change-Id: If4a8eb6f0376c3d2dde8465fde6bfd86ab704920
James Zern [Fri, 11 Sep 2015 18:27:49 +0000 (18:27 +0000)]
Merge "Fix vp10 high bit-depth build"
Jingning Han [Fri, 11 Sep 2015 15:56:06 +0000 (08:56 -0700)]
Fix vp10 high bit-depth build
Change-Id: Ie3daed0b282b43ef81d2f8797ac1f6e8bde7d65e
Marco [Fri, 11 Sep 2015 15:48:22 +0000 (08:48 -0700)]
Remove unneeded/incorrect comment.
Change-Id: I5c923223c284ad4fda0c45572a66bebc8528dd1d
James Zern [Fri, 11 Sep 2015 02:30:07 +0000 (02:30 +0000)]
Merge "build: modify default ARFLAGS / .a target"
Ronald S. Bultje [Fri, 11 Sep 2015 02:00:45 +0000 (02:00 +0000)]
Merge "Add misc_fixes experiment."
Ronald S. Bultje [Fri, 11 Sep 2015 02:00:30 +0000 (02:00 +0000)]
Merge "Don't reset sign_bias fields in vp10_setup_past_independence()."
Angie Chiang [Fri, 11 Sep 2015 00:10:45 +0000 (00:10 +0000)]
Merge "Isolate vp10's fwd_txfm from vp9"
Alex Converse [Thu, 10 Sep 2015 23:04:46 +0000 (23:04 +0000)]
Merge changes Ibb308526,I99e330f8
* changes:
Prevent CR in screen mode from refreshing flat inter blocks forever.
For screen content consider intra uv when color_sensitivity is set.
Jingning Han [Thu, 10 Sep 2015 23:03:06 +0000 (23:03 +0000)]
Merge "Take out reference_masking speed feature"
Jingning Han [Thu, 10 Sep 2015 23:02:38 +0000 (23:02 +0000)]
Merge "Take out skip_encode speed feature in vp10"
Jingning Han [Thu, 10 Sep 2015 23:02:27 +0000 (23:02 +0000)]
Merge "Remove speed features in vp10"
Angie Chiang [Thu, 10 Sep 2015 22:51:02 +0000 (22:51 +0000)]
Merge "Isolate vp10's inv_txfm from vp9"
Angie Chiang [Thu, 10 Sep 2015 00:56:43 +0000 (17:56 -0700)]
Isolate vp10's fwd_txfm from vp9
1) copy fw_txfm related files from vpx_dsp tp vp10
vpx_dsp/fwd_txfm.h → vp10/common/vp10_fwd_txfm.h
vpx_dsp/fwd_txfm.c → vp10/common/vp10_fwd_txfm.c
vpx_dsp/x86/fwd_dct32x32_impl_sse2.h → vp10/common/x86/vp10_fwd_dct32x32_impl_sse2.h
vpx_dsp/x86/fwd_txfm_sse2.c → vp10/common/x86/vp10_fwd_txfm_sse2.c
vpx_dsp/x86/fwd_txfm_impl_sse2.h → vp10/common/vp10_fwd_txfm_impl_sse2.h
Change-Id: Ie9428b2ab1ffeb28e17981bb8a142ebe204f3bba
Angie Chiang [Fri, 4 Sep 2015 21:51:54 +0000 (14:51 -0700)]
Isolate vp10's inv_txfm from vp9
1) copy following files from vpx_dsp/ to vp10/common/
vp10_inv_txfm.c
vp10_inv_txfm.h
vp10_inv_txfm_sse2.c
vp10_inv_txfm_sse2.h
2) change the function prefix "vpx_" to "vp10_" in above files
3) add unit test at vp10_inv_txfm_test.cc
Change-Id: I206f10f60c8b27d872c84b7482c3bb1d1cb4b913
Alex Converse [Thu, 3 Sep 2015 21:53:40 +0000 (14:53 -0700)]
Prevent CR in screen mode from refreshing flat inter blocks forever.
Take the minimum last_codec_q_map on inter skip.
Change-Id: Ibb308526dd19793bb359f51ebd7b48d8692903fd
Alex Converse [Thu, 3 Sep 2015 21:52:39 +0000 (14:52 -0700)]
For screen content consider intra uv when color_sensitivity is set.
Change-Id: I99e330f8a779b4d564c19ef4639a881cb68910ae
Jingning Han [Thu, 10 Sep 2015 19:56:41 +0000 (12:56 -0700)]
Take out reference_masking speed feature
This condition is not effectively in use. The actual reference
frame masking is done in other route.
Change-Id: Ia59c843bcac7243dada92f0f67658d7ce43df5e8
James Zern [Thu, 10 Sep 2015 19:54:01 +0000 (12:54 -0700)]
build: modify default ARFLAGS / .a target
remove 'u' and specify all objects to allow objects with the same
basename to be added and a incremental rebuild to succeed
fixes issue #1067
Change-Id: Id0ebc89be826a026f1bbf21b4e32a2b1af45154d
Vignesh Venkatasubramanian [Thu, 10 Sep 2015 18:02:40 +0000 (11:02 -0700)]
third_party/libwebm: pull from upstream.
Upstream hash:
a58c32339e06e5d672a58cdd5844cea0a661e735
Changes from upstream since last update:
a58c323 mkvmuxer: Add codec id constant for VP10.
714f3c4 mkvparser: validate results in EBMLHeader::Parse.
cec98d4 mkvparser: Correct the ReadID implementation.
eb36ae4 Merge changes I029a268e,Ia272b150,I5c4d1bbc,Ia47a2478,I3a2e2226
229f493 Merge "mkvparser: Segment::AppendCluster asserts to error checks."
287faf9 Merge "mkvparser: Segment::DoLoadClusterUnknownSize asserts to error checks."
1a87b59 Merge "mkvparser: Segment assert clean up."
d26ec69 mkvparser: Cluster::Parse clean up.
f2029be mkvparser: Disallow EBML IDs equal to 0.
19f5694 mkvparser: Cluster::Load clean up.
27a07c1 mkvparser: Segment::Load asserts to error checks.
d0313dd mkvparser: Segment::PreloadCluster asserts to error checks.
b108695 mkvparser: Segment::AppendCluster asserts to error checks.
4630f80 mkvparser: Segment::DoLoadClusterUnknownSize asserts to error checks.
841a9b5 mkvparser: Segment assert clean up.
8c4ca2e Merge "mkvparser: Make mkvparser namespace usage uniform."
49ae6f0 Merge "mkvparser: Fix include order."
0735bb5 mkvparser: Make mkvparser namespace usage uniform.
93b24c4 mkvparser: Fix include order.
a57d660 sample_muxer: fix Segment memory leak on error
1c5bd94 mkvparser: Cues, change asserts to error checks.
7f77201 Merge "mkvparser: Add ReadID."
795fd56 mkvparser: set kMaxAllocSize explicitly
23bb18b mkvparser: Add ReadID.
7b57e37 mkvparser: add SafeArrayAlloc.
83a1f68 mkvparser: Remove buf_t typedef.
5074714 Merge changes Ia1265a63,I799d54df,Icfc582e4,I3425f608
b181105 Merge changes Ie4318152,I1e65f30f
06b4337 Block::Parse: replace pos asserts w/checks
b366a98 Cluster::ParseBlockGroup: replace pos asserts w/checks
2857b23 Tags::*::Parse: replace pos asserts w/checks
f1b2cfa Chapters::*::Parse: replace pos asserts w/checks
ca80629 Merge "mkvparser: Cues::PreloadCuePoint now returns bool."
6b4b297 Block::Parse: use int64 to aggregate laced frame sizes
c0d2c98 UnserializeFloat: check result for Inf/NaN
1a6dc4f mkvparser: Cues::PreloadCuePoint now returns bool.
275ac22 mkvparser: Cluster::Create clean up.
064f2ee Segment::PreloadCluster(): return a bool status
3778408 Segment::AppendCluster(): return a bool status
e86d046 mkvparser: check Cluster::Create() return
f9885b5 mkvparser: check allocations
21ee398 mkvparser: Segment::Load fail w/missing info/tracks
08fb654 Merge changes I264e68b2,Ife6190a4,Ibf37245f,I06efadb5,I88b5dfec, ...
c896095 mkvparser/Cluster: convert asserts to failure returns
680b4bf mkvparser/Tracks: convert asserts to failure returns
5889e6c mkvparser/Track: convert asserts to failure returns
5135c4c mkvparser/ContentEncoding: convert asserts to failure returns
b0e4f32 mkvparser/Cues: convert asserts to failure returns
13ccc7f mkvparser/UnserializeInt: fix sign flip
db3f9bb mkvparser/SeekHead: convert asserts to failure returns
8de3654 mkvparser/Segment: convert asserts to failure returns
fa2aa7d SeekHead::Parse(): fix assertion failure
d9bdade sample{,_muxer}: check SegmentInfo::GetInfo() return
07a9cf7 Merge "mkvparser: Remove some asserts."
c56ee29 mkvparser: Remove some asserts.
d901324 Merge "mkvparser: Remove some asserts from SegmentInfo::Parse."
7f7d898 Fix case sensitivity issue in iosbuild.sh.
42fe2cd mkvparser: Remove some asserts from SegmentInfo::Parse.
8bccd9c Merge "mkvparser: avoid rollover in UnserializeInt()."
7a2fa0d mkvparser: avoid rollover in UnserializeInt().
44f5ce6 mkvparser: Disallow durations in seconds greater than LONG_LONG_MAX.
b521e30 Merge "mkvparser: Segment::ParseHeaders() avoid rollover and bad int sizes."
7680e2a mkvparser: Check for errors in Match().
39a315f mkvparser: Segment::ParseHeaders() avoid rollover and bad int sizes.
f250ace mkvparser: Handle invalid lengths and rollover in ParseElementHeader().
cd96a76 mkvparser: Avoid rollover/truncation in UnserializeString().
8e8b3db Merge "mkvparser: Add error checking in Block::Parse."
82b7e5f sample: correct mbstowcs() error check
04d7809 sample: check allocation return
986b64b mkvparser: Add error checking in Block::Parse.
Change-Id: I39beef84962d6341f8ce53be06807b3e2068f777
Jingning Han [Thu, 10 Sep 2015 19:42:21 +0000 (12:42 -0700)]
Take out skip_encode speed feature in vp10
Change-Id: Ic39d4523e78863c816b0fc85f56ea5ae5e0b3310
Jingning Han [Thu, 10 Sep 2015 19:24:06 +0000 (12:24 -0700)]
Remove speed features in vp10
Take out speed features that affect the compression performance
to simplify the coding route. This commit removes the motion field
mode search used in speed 3.
Change-Id: Ifdf6862cb1ece8261125a56d9d89bcef60758c00
Vignesh Venkatasubramanian [Thu, 10 Sep 2015 17:44:59 +0000 (10:44 -0700)]
webmdec: Handle codec id being NULL.
WebM files could have CodecId missing in the track headers. Treat those files as
unknown input file type in vpxdec.
Fixes issue #1064.
Change-Id: I6c3bb7b4bd3a4f5c244312482a5996f8b68db3f3
Marco Paniconi [Thu, 10 Sep 2015 15:47:49 +0000 (15:47 +0000)]
Merge "vp8: Small adjustment to cyclic_refresh max_mbs_perframe."
James Zern [Thu, 10 Sep 2015 06:10:44 +0000 (06:10 +0000)]
Merge "Fix ioc warnings related to sub8x8 reference frame"
Tom Finegan [Thu, 10 Sep 2015 01:36:29 +0000 (01:36 +0000)]
Merge "Revert "Fix building with iOS 9 beta SDK""
Jingning Han [Wed, 9 Sep 2015 19:29:57 +0000 (12:29 -0700)]
Fix ioc warnings related to sub8x8 reference frame
Access scaled reference frame in the sub8x8 rate-distortion
optimization loop only when the current test mode is an inter mode.
This prevents an ioc warning triggered by sending intra_frame index
to fetch scaled reference frame.
Change-Id: I6177ecc946651dd86c7ce362e3f65c4074444604
jackychen [Wed, 9 Sep 2015 22:30:01 +0000 (15:30 -0700)]
Change the qp threshold of VP9 dynamic resizing.
Change-Id: I1efe086191665ff8fa063f03d8e2032024dc090f
Marco [Wed, 9 Sep 2015 21:51:14 +0000 (14:51 -0700)]
vp8: Small adjustment to cyclic_refresh max_mbs_perframe.
For 3 temporal layers, reduce somewhat the
cyclic_refresh_mode_max_mbs_perframe parameter, from 20% to ~14%.
Small increase in PSNR/SSIM metrics.
Change-Id: Ia216fa5474048f1ef7fe3db88cd60dfef2a1bf8a
Marco Paniconi [Wed, 9 Sep 2015 18:05:31 +0000 (18:05 +0000)]
Merge "SVC sample encoder: Change some settings/update."
Marco [Wed, 9 Sep 2015 00:05:31 +0000 (17:05 -0700)]
SVC sample encoder: Change some settings/update.
Change settings for 1 pass CBR.
And only use SET_SVC control(s) if there is at least 1 layer (spatial or temporal).
This allows sample encoder to also work for 1 layer case.
Change-Id: I5b0a33c25afb2f24a3a8aa4ec8ade9afc87cd702
Tom Finegan [Wed, 9 Sep 2015 12:25:55 +0000 (05:25 -0700)]
Revert "Fix building with iOS 9 beta SDK"
This reverts commit
78637b61361ab11425afd4a67d43c4df948647a6 .
Breaks armv7-darwin targets with current SDK (iOS 8/Xcode 6.4).
BUG=https://code.google.com/p/webm/issues/detail?id=1062
Change-Id: I58b27950f330557154d681a894114eadfbd3e593
Jingning Han [Tue, 8 Sep 2015 16:53:23 +0000 (09:53 -0700)]
Enable sub8x8 inter mode with scaled ref frame in RD optimization
This commit allows the encoder to include sub8x8 inter mode with
scaled reference frame in the rate-distortion optimization scheme.
Change-Id: Ibbe9678801592826ef22566566dcdeeb008350d5
Jingning Han [Wed, 9 Sep 2015 00:28:42 +0000 (00:28 +0000)]
Merge "Fix the sub8x8 block inter prediction with scaled reference frame"
Debargha Mukherjee [Wed, 9 Sep 2015 00:26:36 +0000 (00:26 +0000)]
Merge "Remove some trailing whitespaces"
Marco [Tue, 8 Sep 2015 18:45:15 +0000 (11:45 -0700)]
Move cyclic_refresh struct into .h file.
Change-Id: I9327cd52d0ec050887ba7e591b094d74bd36bce8
Jingning Han [Sun, 6 Sep 2015 01:28:16 +0000 (18:28 -0700)]
Fix the sub8x8 block inter prediction with scaled reference frame
Sync the encoder's buffer offset calculation for sub8x8 block motion
compensated prediction with scaled reference frame to match the
decoder's behavior. This resolves an enc/dec mismatch issue when
sub8x8 inter mode with scaled is turned on.
Change-Id: I4bab3672b007a5ae0c992f8a701341892d2458b0
Ronald S. Bultje [Tue, 8 Sep 2015 18:03:36 +0000 (14:03 -0400)]
Add misc_fixes experiment.
Will be used to hold various trivial bitstream fixes.
Change-Id: Ic8ba07a2ae392db7c956ebae124913afe2ae4409
Ronald S. Bultje [Thu, 3 Sep 2015 20:21:56 +0000 (16:21 -0400)]
Don't reset sign_bias fields in vp10_setup_past_independence().
The fields are always coded in the frame itself, so there is never any
dependency on past frames. In practice, this fixes sign_bias being
ignored when error_resilient_mode=1.
See issue 1011.
Change-Id: I9d134ef6b445ced4d100fa735ce579855a0fa5af
Debargha Mukherjee [Sat, 5 Sep 2015 00:31:51 +0000 (17:31 -0700)]
Remove some trailing whitespaces
Change-Id: Icf06d35ca347713253d1eba341a894b51efa81a9
Ronald S. Bultje [Fri, 4 Sep 2015 23:53:24 +0000 (23:53 +0000)]
Merge "Make update_map/temporal_update fields implicit for keyframes."
James Zern [Fri, 4 Sep 2015 05:30:57 +0000 (05:30 +0000)]
Merge "VPX: subpixel_8t_ssse3 asm using x86inc"
Scott LaVarnway [Wed, 2 Sep 2015 20:15:52 +0000 (13:15 -0700)]
VPX: subpixel_8t_ssse3 asm using x86inc
This is based on the original patch optimized for 32bit
platforms by Tamar/Ilya and now uses the x86inc style asm.
The assembly was also modified to support 64bit platforms.
Change-Id: Ice12f249bbbc162a7427e3d23fbf0cbe4135aff2
Ronald S. Bultje [Thu, 3 Sep 2015 20:08:29 +0000 (16:08 -0400)]
Make update_map/temporal_update fields implicit for keyframes.
These frame types cannot make bitstream parsing depend on previous
frames, so the hypothetical combinations of e.g. keyframe=1 and
update_map=0 or keyframe=1 and temporal_update=1 are non-sensical.
Therefore, make it impossible to code such combinations in the vp10
bitstream header.
See issue 1044.
Change-Id: I3f0a83d5c7e3989541a469a909471424a285239d
Adrian Grange [Thu, 3 Sep 2015 21:44:45 +0000 (21:44 +0000)]
Merge "Fix to dynamic resize mode under change_config()."
Marco [Thu, 3 Sep 2015 19:55:51 +0000 (12:55 -0700)]
Fix to dynamic resize mode under change_config().
If the encoder dynamic resize is triggered and change config()
is then called, it will reset the current (resized) codec width/height
back to the the config (unresized) width/height (which will then
prevent the resizing action from occurring in encoder_loop).
Avoid this by checking for a change in the config width/height
before resetting the cm->width/height.
Change-Id: Id9d50c0ee8a943abe4b6c72bbaa02d9696f93177
Ronald S. Bultje [Thu, 3 Sep 2015 16:08:03 +0000 (12:08 -0400)]
Unify coding order of MC filters between blocks and frame header.
In VP9, the order for frame header was: [0] smooth, [1] regular, [2]
sharp, [3] bilinear. Per-block, the order was [0] regular, [1] smooth
and [2] sharp. For VP10, swap smooth/regular in the frame header so
that the block ordering and frame header ordering are interchangeable.
See issue #1046.
Change-Id: Ic9ec5964874375e40cd59bef50b489a76cbe4365
James Zern [Thu, 3 Sep 2015 01:00:21 +0000 (18:00 -0700)]
test/*.h: use inline rather than INLINE
inline is always available in c++
Change-Id: Ie8e4fc4df75309b649d7ef36bb5aadd95554035f
James Zern [Thu, 3 Sep 2015 01:25:44 +0000 (01:25 +0000)]
Merge "Revert "add range_check for fdct in vp10""
James Zern [Thu, 3 Sep 2015 00:23:16 +0000 (00:23 +0000)]
Revert "add range_check for fdct in vp10"
Tests fail to build.
This reverts commit
f78d6aa77245cea5cd7f630a20f4e6d576679e7f .
Change-Id: Ia220270517ded273c65a7ab965d82edb696663c9
Angie Chiang [Wed, 2 Sep 2015 22:27:47 +0000 (22:27 +0000)]
Merge "add range_check for fdct in vp10"
Angie Chiang [Sat, 29 Aug 2015 03:39:10 +0000 (20:39 -0700)]
add range_check for fdct in vp10
Unify the style of fdct4() fdct8() fdct16()
Add fdct32()
Add range_check() at each stage
Add unit test at ../../test/vp10_dct_test.cc
Change-Id: I9e912b2c5683862e65c5a21abc3e1c260cca4576
Johann Koenig [Wed, 2 Sep 2015 19:21:46 +0000 (19:21 +0000)]
Merge changes If253fb95,I1c8a792c,I49f9b10f,I15472738,I1e7f3c32
* changes:
test: limit the valid image size on OS/2
configure: add -Zhigh-mem to LDFLAGS on OS/2
configure: disable PIC on OS/2
Makefile: add $(STACKREALIGN) to CFLAGS for vp9_reconintra.c
x86inc.asm: fix NASM compilation
KO Myung-Hun [Sun, 30 Aug 2015 07:28:41 +0000 (16:28 +0900)]
test: limit the valid image size on OS/2
Without this, test_libvpx crashes at VP9FrameSizeTestsLarge.ValidSizes
on OS/2.
Change-Id: If253fb95a04216babed56458f0fab8c70523fc7e
KO Myung-Hun [Sun, 30 Aug 2015 07:27:58 +0000 (16:27 +0900)]
configure: add -Zhigh-mem to LDFLAGS on OS/2
-Zhigh-mem enables to allocate very large memory on OS/2.
Change-Id: I1c8a792cc792c65ce9539a6d3d6b77fc4767848a
KO Myung-Hun [Sun, 30 Aug 2015 06:17:40 +0000 (15:17 +0900)]
configure: disable PIC on OS/2
Change-Id: I49f9b10faa059decf18e123a1f88738071b9c2b8
KO Myung-Hun [Sun, 30 Aug 2015 03:33:05 +0000 (12:33 +0900)]
Makefile: add $(STACKREALIGN) to CFLAGS for vp9_reconintra.c
Without this, test_libvpx crashes at
VP9MultiThreadedFrameParallel.PauseSeekResume on OS/2.
Change-Id: I15472738f4166d97cb49868652982d351a291c11
KO Myung-Hun [Fri, 28 Aug 2015 13:23:38 +0000 (22:23 +0900)]
x86inc.asm: fix NASM compilation
Change-Id: I1e7f3c32969dac7911921062b396750302878c2e
Johann Koenig [Wed, 2 Sep 2015 02:46:54 +0000 (02:46 +0000)]
Merge changes I2e0cc72a,I63a7da78,I4aee2600,I71113505,I3dce6c70, ...
* changes:
Only build multithreaded functions on mt builds.
Don't build calc_psnr for high bit depth.
Enable missing dual lpf test
Remove unused VP10 functions.
Mark VP10 functions as 'INLINE'
Remove unused functions from test files
Only build append_negative_gtest_filter when it is used.
Add INLINE decoration to static test functions
Johann [Tue, 1 Sep 2015 21:54:52 +0000 (14:54 -0700)]
Only build multithreaded functions on mt builds.
Change-Id: I2e0cc72a0543bfea1d2d3499b9906519d5cb3f15
Johann [Tue, 1 Sep 2015 21:54:12 +0000 (14:54 -0700)]
Don't build calc_psnr for high bit depth.
Change-Id: I63a7da7857534dcb4c69ed316c1feadea9ffb45b
Johann [Tue, 1 Sep 2015 20:11:45 +0000 (13:11 -0700)]
Enable missing dual lpf test
Found with -Wunused-function
Change-Id: I4aee260016ae522e3fbbd72977ff09a8ebe5f3cf
Johann [Tue, 1 Sep 2015 20:06:22 +0000 (13:06 -0700)]
Remove unused VP10 functions.
Change-Id: I711135054f02883289cca2efb1f109637009ffbb
Johann [Tue, 1 Sep 2015 20:05:18 +0000 (13:05 -0700)]
Mark VP10 functions as 'INLINE'
Change-Id: I3dce6c702344a5cb5aaf9de1e4be44c53f9ce7e9
Johann [Tue, 1 Sep 2015 19:50:23 +0000 (12:50 -0700)]
Remove unused functions from test files
Change-Id: Id479a83fe3cb7d989a490328b3ff526530777f81
Johann [Tue, 1 Sep 2015 19:47:43 +0000 (12:47 -0700)]
Only build append_negative_gtest_filter when it is used.
Change-Id: If6fec02fd8125b368ea83c99208575ac0d4a662b
Johann [Tue, 1 Sep 2015 19:28:21 +0000 (12:28 -0700)]
Match improved vp9/10 style in libs.mk
Change-Id: I5402c4e4a7d028f4865f429ec5ac6cb592aa2dcb
Johann [Wed, 26 Aug 2015 17:12:14 +0000 (10:12 -0700)]
Add INLINE decoration to static test functions
Fixes "unused function" warnings.
Change-Id: Idc0cd06189917c37dead17d923ac7f9ecef18983
Yunqing Wang [Tue, 1 Sep 2015 19:01:13 +0000 (19:01 +0000)]
Merge "Disable temporal/spatial svc test in VP10"
Yunqing Wang [Mon, 31 Aug 2015 16:52:20 +0000 (09:52 -0700)]
Disable temporal/spatial svc test in VP10
The svc tests are disabled since it is not supported in VP10.
Change-Id: Ie6801e7a573b27afd1ea951bf037ccbae1201e8b
Johann [Mon, 31 Aug 2015 21:36:35 +0000 (14:36 -0700)]
Include vpx_dsp_common.h when using VPXMIN/MAX
Change-Id: I2e387a06484a06301f3cd6600c4ba2f4335b61ee
Yunqing Wang [Mon, 31 Aug 2015 17:49:45 +0000 (17:49 +0000)]
Merge "Fix an indent"
Johann Koenig [Mon, 31 Aug 2015 17:46:20 +0000 (17:46 +0000)]
Merge "Check CONFIG_VP<N> instead of encoder and decoder"
Yaowu Xu [Mon, 31 Aug 2015 16:38:36 +0000 (16:38 +0000)]
Merge "Expand the idct4_c() function in idct8_c()"
Yunqing Wang [Mon, 31 Aug 2015 15:41:50 +0000 (08:41 -0700)]
Fix an indent
An indent fix in bitstream.c.
Change-Id: Ia47e9ac5b01490cb2173a254444848b7bed56e5c
James Zern [Sat, 29 Aug 2015 22:47:46 +0000 (15:47 -0700)]
vp10: fix high bitdepth build
broken since:
c147c4d vp10 cleanup: remove svc code
Change-Id: Id703502b2d645fc051a5d9a23e6f1715d92a116b
James Zern [Sat, 29 Aug 2015 03:25:29 +0000 (03:25 +0000)]
Merge changes from topic 'vp9-enc-static-fns'
* changes:
vp9_mcomp: make search functions private
vp9_mbgraph: use vp9_full_pixel_search(HEX)
vp9_temporal_filter: use vp9_full_pixel_search(HEX)
vp9_firstpass: make vp9_init_subsampling private
vp9_encoder: make vp9_alloc_compressor_data private
James Zern [Sat, 29 Aug 2015 03:22:00 +0000 (20:22 -0700)]
update gitignore
Change-Id: I01c8ba864b73fd3a66c10442041274767ac87bf1
James Zern [Tue, 18 Aug 2015 03:18:31 +0000 (20:18 -0700)]
vp9_mcomp: make search functions private
vp9_full_pixel_search() can be used as a replacement as it dispatches to
all search methods
Change-Id: I57fcb79c1362b569dc95237bdcc8390f54efd440
James Zern [Tue, 18 Aug 2015 03:57:14 +0000 (20:57 -0700)]
vp9_mbgraph: use vp9_full_pixel_search(HEX)
instead of calling vp9_hex_search() directly. this will allow the
function to be made private
Change-Id: I2f9d4779763aa5b24eda4eb01c78954e061e45ac
James Zern [Tue, 18 Aug 2015 03:57:14 +0000 (20:57 -0700)]
vp9_temporal_filter: use vp9_full_pixel_search(HEX)
instead of calling vp9_hex_search() directly. this will allow the
function to be made private
Change-Id: I8c8cfc61fca4faef593c1c3fc29824dc417cae22
James Zern [Tue, 18 Aug 2015 03:17:47 +0000 (20:17 -0700)]
vp9_firstpass: make vp9_init_subsampling private
Change-Id: I03b2ae99ec2e212c76bf815de7d5745b5c965d57
James Zern [Tue, 18 Aug 2015 03:17:00 +0000 (20:17 -0700)]
vp9_encoder: make vp9_alloc_compressor_data private
Change-Id: I38b4de692f4f7e880766316783981cbd1134bed9
Johann Koenig [Fri, 28 Aug 2015 23:18:18 +0000 (16:18 -0700)]
Check CONFIG_VP<N> instead of encoder and decoder
If either the encoder or the decoder is enabled, CONFIG_VP<N> will be
set. This simplifies the conditional and passes the chromium update
script when CONFIG_ values are passed in with 'yes' and 'no' values.
This was failing because it was checking against empty strings but
they are set to 'no'
Change-Id: I02ecd557210088ba1458cd0e89eead5666f6597a
Yunqing Wang [Fri, 28 Aug 2015 22:23:31 +0000 (22:23 +0000)]
Merge "vp10 cleanup: remove svc code"
Marco Paniconi [Fri, 28 Aug 2015 21:49:56 +0000 (21:49 +0000)]
Merge "vp8: modifcatiion to skin map computation."
James Zern [Fri, 28 Aug 2015 20:31:01 +0000 (20:31 +0000)]
Merge "encode_test_driver: test for failure prior to encode"
Yunqing Wang [Thu, 27 Aug 2015 22:11:38 +0000 (15:11 -0700)]
vp10 cleanup: remove svc code
Spatial/temporal svc code was removed. Verified using Borg test,
and the results before and after the change are matching.
Change-Id: I4c2ee5cd560428e3e50be02e57e5871ef4246390
Angie Chiang [Thu, 27 Aug 2015 00:40:52 +0000 (17:40 -0700)]
Expand the idct4_c() function in idct8_c()
Change-Id: I5afa3c351ba7c5e7deb3889f7471619ac60af255
Marco [Mon, 24 Aug 2015 20:00:50 +0000 (13:00 -0700)]
Fix to golden update in cyclic_refresh.
For one pass CBR: only check for updating refresh_golden
if ext_refresh_frame_flags_pending is not set (i.e., == 0).
And move the resetting of ext_refresh_frame_flags_pending = 0
down to after the encode_loop (and account for dropped frames).
This is to prevent changing refresh_golden flga when the user
supplies the reference/update flags.
Change-Id: I4d87b3e705ba43f243667e367503b585c61e2a54
James Zern [Fri, 28 Aug 2015 02:55:49 +0000 (02:55 +0000)]
Merge "configure: append --extra-cflags to final set"
James Zern [Thu, 27 Aug 2015 23:05:52 +0000 (16:05 -0700)]
encode_test_driver: test for failure prior to encode
limits the amount of failure messages should e.g., a test file fail to
be opened
Change-Id: I0b30da0faa78cada23a226b577b3a48c74a896cd
James Zern [Thu, 27 Aug 2015 21:46:08 +0000 (14:46 -0700)]
vp8: use VPX(MIN|MAX) from vpx_dsp_common.h
remove MIN/MAX defines in vp8/common/common.h
Change-Id: I41520f34af175e05b263ebd12198f4de29a967db