Robert Haas [Sun, 5 Oct 2014 01:25:41 +0000 (21:25 -0400)]
Eliminate one background-worker-related flag variable.
Teach sigusr1_handler() to use the same test for whether a worker
might need to be started as ServerLoop(). Aside from being perhaps
a bit simpler, this prevents a potentially-unbounded delay when
starting a background worker. On some platforms, select() doesn't
return when interrupted by a signal, but is instead restarted,
including a reset of the timeout to the originally-requested value.
If signals arrive often enough, but no connection requests arrive,
sigusr1_handler() will be executed repeatedly, but the body of
ServerLoop() won't be reached. This change ensures that, even in
that case, background workers will eventually get launched.
This is far from a perfect fix; really, we need select() to return
control to ServerLoop() after an interrupt, either via the self-pipe
trick or some other mechanism. But that's going to require more
work and discussion, so let's do this for now to at least mitigate
the damage.
Per investigation of test_shm_mq failures on buildfarm member anole.
Tom Lane [Sat, 4 Oct 2014 18:18:19 +0000 (14:18 -0400)]
Update time zone data files to tzdata release 2014h.
Most zones in the Russian Federation are subtracting one or two hours
as of 2014-10-26. Update the meanings of the abbreviations IRKT, KRAT,
MAGT, MSK, NOVT, OMST, SAKT, VLAT, YAKT, YEKT to match.
The IANA timezone database has adopted abbreviations of the form AxST/AxDT
for all Australian time zones, reflecting what they believe to be current
majority practice Down Under. These names do not conflict with usage
elsewhere (other than ACST for Acre Summer Time, which has been in disuse
since 1994). Accordingly, adopt these names into our "Default" timezone
abbreviation set. The "Australia" abbreviation set now contains only
CST,EAST,EST,SAST,SAT,WST, all of which are thought to be mostly historical
usage. Note that SAST has also been changed to be South Africa Standard
Time in the "Default" abbreviation set.
Add zone abbreviations SRET (Asia/Srednekolymsk) and XJT (Asia/Urumqi),
and use WSST/WSDT for western Samoa.
Also a DST law change in the Turks & Caicos Islands (America/Grand_Turk),
and numerous corrections for historical time zone data.
Tom Lane [Fri, 3 Oct 2014 21:44:38 +0000 (17:44 -0400)]
Update time zone abbreviations lists.
This updates known_abbrevs.txt to be what it should have been already,
were my -P patch not broken; and updates some tznames/ entries that
missed getting any love in previous timezone data updates because zic
failed to flag the change of abbreviation.
The non-cosmetic updates:
* Remove references to "ADT" as "Arabia Daylight Time", an abbreviation
that's been out of use since 2007; therefore, claiming there is a conflict
with "Atlantic Daylight Time" doesn't seem especially helpful. (We have
left obsolete entries in the files when they didn't conflict with anything,
but that seems like a different situation.)
* Fix entirely incorrect GMT offsets for CKT (Cook Islands), FJT, FJST
(Fiji); we didn't even have them on the proper side of the date line.
(Seems to have been aboriginal errors in our tznames data; there's no
evidence anything actually changed recently.)
* FKST (Falkland Islands Summer Time) is now used all year round, so
don't mark it as a DST abbreviation.
* Update SAKT (Sakhalin) to mean GMT+11 not GMT+10.
In cosmetic changes, I fixed a bunch of wrong (or at least obsolete)
claims about abbreviations not being present in the zic files, and
tried to be consistent about how obsolete abbreviations are labeled.
Note the underlying timezone/data files are still at release 2014e;
this is just trying to get us in sync with what those files actually
say before we go to the next update.
Stephen Frost [Fri, 3 Oct 2014 20:31:53 +0000 (16:31 -0400)]
Fix CreatePolicy, pg_dump -v; psql and doc updates
Peter G pointed out that valgrind was, rightfully, complaining about
CreatePolicy() ending up copying beyond the end of the parsed policy
name. Name is a fixed-size type and we need to use namein (through
DirectFunctionCall1()) to flush out the entire array before we pass
it down to heap_form_tuple.
Michael Paquier pointed out that pg_dump --verbose was missing a
newline and Fabrízio de Royes Mello further pointed out that the
schema was also missing from the messages, so fix those also.
Also, based on an off-list comment from Kevin, rework the psql \d
output to facilitate copy/pasting into a new CREATE or ALTER POLICY
command.
Lastly, improve the pg_policies view and update the documentation for
it, along with a few other minor doc corrections based on an off-list
discussion with Adam Brightwell.
Tom Lane [Fri, 3 Oct 2014 18:48:11 +0000 (14:48 -0400)]
Fix bogus logic for zic -P option.
The quick hack I added to zic to dump out currently-in-use timezone
abbreviations turns out to have a nasty bug: within each zone, it was
printing the last "struct ttinfo" to be *defined*, not necessarily the
last one in use. This was mainly a problem in zones that had changed the
meaning of their zone abbreviation (to another GMT offset value) and later
changed it back.
As a result of this error, we'd missed out updating the tznames/ files
for some jurisdictions that have changed their zone abbreviations since
the tznames/ files were originally created. I'll address the missing data
updates in a separate commit.
Alvaro Herrera [Fri, 3 Oct 2014 16:01:27 +0000 (13:01 -0300)]
Don't balance vacuum cost delay when per-table settings are in effect
When there are cost-delay-related storage options set for a table,
trying to make that table participate in the autovacuum cost-limit
balancing algorithm produces undesirable results: instead of using the
configured values, the global values are always used,
as illustrated by Mark Kirkwood in
http://www.postgresql.org/message-id/52FACF15.8020507@catalyst.net.nz
Since the mechanism is already complicated, just disable it for those
cases rather than trying to make it cope. There are undesirable
side-effects from this too, namely that the total I/O impact on the
system will be higher whenever such tables are vacuumed. However, this
is seen as less harmful than slowing down vacuum, because that would
cause bloat to accumulate. Anyway, in the new system it is possible to
tweak options to get the precise behavior one wants, whereas with the
previous system one was simply hosed.
This has been broken forever, so backpatch to all supported branches.
This might affect systems where cost_limit and cost_delay have been set
for individual tables.
Check for GiST index tuples that don't fit on a page.
The page splitting code would go into infinite recursion if you try to
insert an index tuple that doesn't fit even on an empty page.
Per analysis and suggested fix by Andrew Gierth. Fixes bug #11555, reported
by Bryan Seitz (analysis happened over IRC). Backpatch to all supported
versions.
Robert Haas [Thu, 2 Oct 2014 17:58:50 +0000 (13:58 -0400)]
Increase the number of buffer mapping partitions to 128.
Testing by Amit Kapila, Andres Freund, and myself, with and without
other patches that also aim to improve scalability, seems to indicate
that this change is a significant win over the current value and over
smaller values such as 64. It's not clear how high we can push this
value before it starts to have negative side-effects elsewhere, but
going this far looks OK.
Tom Lane [Wed, 1 Oct 2014 23:30:24 +0000 (19:30 -0400)]
Fix some more problems with nested append relations.
As of commit a87c72915 (which later got backpatched as far as 9.1),
we're explicitly supporting the notion that append relations can be
nested; this can occur when UNION ALL constructs are nested, or when
a UNION ALL contains a table with inheritance children.
Bug #11457 from Nelson Page, as well as an earlier report from Elvis
Pranskevichus, showed that there were still nasty bugs associated with such
cases: in particular the EquivalenceClass mechanism could try to generate
"join" clauses connecting an appendrel child to some grandparent appendrel,
which would result in assertion failures or bogus plans.
Upon investigation I concluded that all current callers of
find_childrel_appendrelinfo() need to be fixed to explicitly consider
multiple levels of parent appendrels. The most complex fix was in
processing of "broken" EquivalenceClasses, which are ECs for which we have
been unable to generate all the derived equality clauses we would like to
because of missing cross-type equality operators in the underlying btree
operator family. That code path is more or less entirely untested by
the regression tests to date, because no standard opfamilies have such
holes in them. So I wrote a new regression test script to try to exercise
it a bit, which turned out to be quite a worthwhile activity as it exposed
existing bugs in all supported branches.
The present patch is essentially the same as far back as 9.2, which is
where parameterized paths were introduced. In 9.0 and 9.1, we only need
to back-patch a small fragment of commit 5b7b5518d, which fixes failure to
propagate out the original WHERE clauses when a broken EC contains constant
members. (The regression test case results show that these older branches
are noticeably stupider than 9.2+ in terms of the quality of the plans
generated; but we don't really care about plan quality in such cases,
only that the plan not be outright wrong. A more invasive fix in the
older branches would not be a good idea anyway from a plan-stability
standpoint.)
Andres Freund [Wed, 1 Oct 2014 15:22:21 +0000 (17:22 +0200)]
Refactor replication connection code of various pg_basebackup utilities.
Move some more code to manage replication connection command to
streamutil.c. A later patch will introduce replication slot via
pg_receivexlog and this avoid duplicating relevant code between
pg_receivexlog and pg_recvlogical.
Andres Freund [Mon, 29 Sep 2014 13:35:40 +0000 (15:35 +0200)]
pg_recvlogical.c code review.
Several comments still referred to 'initiating', 'freeing', 'stopping'
replication slots. These were terms used during different phases of
the development of logical decoding, but are no long accurate.
Also rename StreamLog() to StreamLogicalLog() and add 'void' to the
prototype.
Author: Michael Paquier, with some editing by me.
Backpatch to 9.4 where pg_recvlogical was introduced.
Remove num_xloginsert_locks GUC, replace with a #define
I left the GUC in place for the beta period, so that people could experiment
with different values. No-one's come up with any data that a different value
would be better under some circumstances, so rather than try to document to
users what the GUC, let's just hard-code the current value, 8.
Andres Freund [Wed, 1 Oct 2014 12:23:43 +0000 (14:23 +0200)]
Block signals while computing the sleep time in postmaster's main loop.
DetermineSleepTime() was previously called without blocked
signals. That's not good, because it allows signal handlers to
interrupt its workings.
DetermineSleepTime() was added in 9.3 with the addition of background
workers (da07a1e856511), where it only read from
BackgroundWorkerList.
Since 9.4, where dynamic background workers were added (7f7485a0cde),
the list is also manipulated in DetermineSleepTime(). That's bad
because the list now can be persistently corrupted if modified by both
a signal handler and DetermineSleepTime().
This was discovered during the investigation of hangs on buildfarm
member anole. It's unclear whether this bug is the source of these
hangs or not, but it's worth fixing either way. I have confirmed that
it can cause crashes.
It luckily looks like this only can cause problems when bgworkers are
actively used.
Add functions for dealing with PGP armor header lines to pgcrypto.
This add a new pgp_armor_headers function to extract armor headers from an
ASCII-armored blob, and a new overloaded variant of the armor function, for
constructing an ASCII-armor with extra headers.
Andres Freund [Wed, 1 Oct 2014 09:54:05 +0000 (11:54 +0200)]
Rename CACHE_LINE_SIZE to PG_CACHE_LINE_SIZE.
As noted in http://bugs.debian.org/763098 there is a conflict between
postgres' definition of CACHE_LINE_SIZE and the definition by various
*bsd platforms. It's debatable who has the right to define such a
name, but postgres' use was only introduced in 375d8526f290 (9.4), so
it seems like a good idea to rename it.
Stephen Frost [Tue, 30 Sep 2014 19:55:28 +0000 (15:55 -0400)]
Correct stdin/stdout usage in COPY .. PROGRAM
The COPY documentation incorrectly stated, for the PROGRAM case,
that we read from stdin and wrote to stdout. Fix that, and improve
consistency by referring to the 'PostgreSQL' user instead of the
'postgres' user, as is done in the rest of the COPY documentation.
Pointed out by Peter van Dijk.
Back-patch to 9.3 where COPY .. PROGRAM was introduced.
Per discussion, revert the commit which added 'ignore_nulls' to
row_to_json. This capability would be better added as an independent
function rather than being bolted on to row_to_json. Additionally,
the implementation didn't address complex JSON objects, and so was
incomplete anyway.
Pointed out by Tom and discussed with Andrew and Robert.
Tom Lane [Mon, 29 Sep 2014 16:29:21 +0000 (12:29 -0400)]
Change JSONB's on-disk format for improved performance.
The original design used an array of offsets into the variable-length
portion of a JSONB container. However, such an array is basically
uncompressible by simple compression techniques such as TOAST's LZ
compressor. That's bad enough, but because the offset array is at the
front, it tended to trigger the give-up-after-1KB heuristic in the TOAST
code, so that the entire JSONB object was stored uncompressed; which was
the root cause of bug #11109 from Larry White.
To fix without losing the ability to extract a random array element in O(1)
time, change this scheme so that most of the JEntry array elements hold
lengths rather than offsets. With data that's compressible at all, there
tend to be fewer distinct element lengths, so that there is scope for
compression of the JEntry array. Every N'th entry is still an offset.
To determine the length or offset of any specific element, we might have
to examine up to N preceding JEntrys, but that's still O(1) so far as the
total container size is concerned. Testing shows that this cost is
negligible compared to other costs of accessing a JSONB field, and that
the method does largely fix the incompressible-data problem.
While at it, rearrange the order of elements in a JSONB object so that
it's "all the keys, then all the values" not alternating keys and values.
This doesn't really make much difference right at the moment, but it will
allow providing a fast path for extracting individual object fields from
large JSONB values stored EXTERNAL (ie, uncompressed), analogously to the
existing optimization for substring extraction from large EXTERNAL text
values.
Bump catversion to denote the incompatibility in on-disk format.
We will need to fix pg_upgrade to disallow upgrading jsonb data stored
with 9.4 betas 1 and 2.
Stephen Frost [Fri, 26 Sep 2014 16:46:26 +0000 (12:46 -0400)]
Fix relcache for policies, and doc updates
Andres pointed out that there was an extra ';' in equalPolicies, which
made me realize that my prior testing with CLOBBER_CACHE_ALWAYS was
insufficient (it didn't always catch the issue, just most of the time).
Thanks to that, a different issue was discovered, specifically in
equalRSDescs. This change corrects eqaulRSDescs to return 'true' once
all policies have been confirmed logically identical. After stepping
through both functions to ensure correct behavior, I ran this for
about 12 hours of CLOBBER_CACHE_ALWAYS runs of the regression tests
with no failures.
In addition, correct a few typos in the documentation which were pointed
out by Thom Brown (thanks!) and improve the policy documentation further
by adding a flushed out usage example based on a unix passwd file.
Lastly, clean up a few comments in the regression tests and pg_dump.h.
Robert Haas [Fri, 26 Sep 2014 15:21:35 +0000 (11:21 -0400)]
Fix identify_locking_dependencies for schema-only dumps.
Without this fix, parallel restore of a schema-only dump can deadlock,
because when the dump is schema-only, the dependency will still be
pointing at the TABLE item rather than the TABLE DATA item.
Andres Freund [Fri, 26 Sep 2014 13:55:44 +0000 (15:55 +0200)]
Further atomic ops portability improvements and bug fixes.
* Don't play tricks for a more efficient pg_atomic_clear_flag() in the
generic gcc implementation. The old version was broken on gcc < 4.7
on !x86 platforms. Per buildfarm member chipmunk.
* Make usage of __atomic() fences depend on HAVE_GCC__ATOMIC_INT32_CAS
instead of HAVE_GCC__ATOMIC_INT64_CAS - there's platforms with 32bit
support that don't support 64bit atomics.
* Blindly fix two superflous #endif in generic-xlc.h
* Check for --disable-atomics in platforms but x86.
Andres Freund [Fri, 26 Sep 2014 00:55:38 +0000 (02:55 +0200)]
Define META_FREE in a way that doesn't cause -Wempty-body warnings.
That get rids of the only -Wempty-body warning when compiling postgres
with gcc 4.8/9. As 6550b901f shows, it's useful to be able to use that
option routinely.
Without asserts there's many more warnings, but that's food for
another commit.
Andres Freund [Fri, 26 Sep 2014 00:44:44 +0000 (02:44 +0200)]
Fix atomic ops inline x86 inline assembly for older 32bit gccs.
Some x86 32bit versions of gcc apparently generate references to the
nonexistant %sil register when using when using the r input
constraint, but not with the =q constraint. The latter restricts
allocations to a/b/c/d which should all work.
Andres Freund [Thu, 25 Sep 2014 21:49:05 +0000 (23:49 +0200)]
Add a basic atomic ops API abstracting away platform/architecture details.
Several upcoming performance/scalability improvements require atomic
operations. This new API avoids the need to splatter compiler and
architecture dependent code over all the locations employing atomic
ops.
For several of the potential usages it'd be problematic to maintain
both, a atomics using implementation and one using spinlocks or
similar. In all likelihood one of the implementations would not get
tested regularly under concurrency. To avoid that scenario the new API
provides a automatic fallback of atomic operations to spinlocks. All
properties of atomic operations are maintained. This fallback -
obviously - isn't as fast as just using atomic ops, but it's not bad
either. For one of the future users the atomics ontop spinlocks
implementation was actually slightly faster than the old purely
spinlock using implementation. That's important because it reduces the
fear of regressing older platforms when improving the scalability for
new ones.
The API, loosely modeled after the C11 atomics support, currently
provides 'atomic flags' and 32 bit unsigned integers. If the platform
efficiently supports atomic 64 bit unsigned integers those are also
provided.
To implement atomics support for a platform/architecture/compiler for
a type of atomics 32bit compare and exchange needs to be
implemented. If available and more efficient native support for flags,
32 bit atomic addition, and corresponding 64 bit operations may also
be provided. Additional useful atomic operations are implemented
generically ontop of these.
The implementation for various versions of gcc, msvc and sun studio have
been tested. Additional existing stub implementations for
* Intel icc
* HUPX acc
* IBM xlc
are included but have never been tested. These will likely require
fixes based on buildfarm and user feedback.
As atomic operations also require barriers for some operations the
existing barrier support has been moved into the atomics code.
Author: Andres Freund with contributions from Oskari Saarenmaa Reviewed-By: Amit Kapila, Robert Haas, Heikki Linnakangas and Álvaro Herrera
Discussion: CA+TgmoYBW+ux5-8Ja=Mcyuy8=VXAnVRHp3Kess6Pn3DMXAPAEA@mail.gmail.com, 20131015123303.GH5300@awork2.anarazel.de, 20131028205522.GI20248@awork2.anarazel.de
Andrew Dunstan [Thu, 25 Sep 2014 19:08:42 +0000 (15:08 -0400)]
Remove ill-conceived ban on zero length json object keys.
We removed a similar ban on this in json_object recently, but the ban in
datum_to_json was left, which generate4d sprutious errors in othee json
generators, notable json_build_object.
Along the way, add an assertion that datum_to_json is not passed a null
key. All current callers comply with this rule, but the assertion will
catch any possible future misbehaviour.
Robert Haas [Thu, 25 Sep 2014 14:43:24 +0000 (10:43 -0400)]
Change locking regimen around buffer replacement.
Previously, we used an lwlock that was held from the time we began
seeking a candidate buffer until the time when we found and pinned
one, which is disastrous for concurrency. Instead, use a spinlock
which is held just long enough to pop the freelist or advance the
clock sweep hand, and then released. If we need to advance the clock
sweep further, we reacquire the spinlock once per buffer.
This represents a significant increase in atomic operations around
buffer eviction, but it still wins on many workloads. On others, it
may result in no gain, or even cause a regression, unless the number
of buffer mapping locks is also increased. However, that seems like
material for a separate commit. We may also need to consider other
methods of mitigating contention on this spinlock, such as splitting
it into multiple locks or jumping the clock sweep hand more than one
buffer at a time, but those, too, seem like separate improvements.
Patch by me, inspired by a much larger patch from Amit Kapila.
Reviewed by Andres Freund.
Refactor space allocation for base64 encoding/decoding in pgcrypto.
Instead of trying to accurately calculate the space needed, use a StringInfo
that's enlarged as needed. This is just moving things around currently - the
old code was not wrong - but this is in preparation for a patch that adds
support for extra armor headers, and would make the space calculation more
complicated.
Andres Freund [Thu, 25 Sep 2014 13:22:26 +0000 (15:22 +0200)]
Fix VPATH builds of the replication parser from git for some !gcc compilers.
Some compilers don't automatically search the current directory for
included files. 9cc2c182fc2 fixed that for builds from tarballs by
adding an include to the source directory. But that doesn't work when
the scanner is generated in the VPATH directory. Use the same search
path as the other parsers in the tree.
One compiler that definitely was affected is solaris' sun cc.
Backpatch to 9.1 which introduced using an actual parser for
replication commands.
Add -D option to specify data directory to pg_controldata and pg_resetxlog.
It was confusing that to other commands, like initdb and postgres, you would
pass the data directory with "-D datadir", but pg_controldata and
pg_resetxlog would take just plain path, without the "-D". With this patch,
pg_controldata and pg_resetxlog also accept "-D datadir".
Stephen Frost [Wed, 24 Sep 2014 21:45:11 +0000 (17:45 -0400)]
Copy-editing of row security
Address a few typos in the row security update, pointed out
off-list by Adam Brightwell. Also include 'ALL' in the list
of commands supported, for completeness.
Stephen Frost [Wed, 24 Sep 2014 20:32:22 +0000 (16:32 -0400)]
Code review for row security.
Buildfarm member tick identified an issue where the policies in the
relcache for a relation were were being replaced underneath a running
query, leading to segfaults while processing the policies to be added
to a query. Similar to how TupleDesc RuleLocks are handled, add in a
equalRSDesc() function to check if the policies have actually changed
and, if not, swap back the rsdesc field (using the original instead of
the temporairly built one; the whole structure is swapped and then
specific fields swapped back). This now passes a CLOBBER_CACHE_ALWAYS
for me and should resolve the buildfarm error.
In addition to addressing this, add a new chapter in Data Definition
under Privileges which explains row security and provides examples of
its usage, change \d to always list policies (even if row security is
disabled- but note that it is disabled, or enabled with no policies),
rework check_role_for_policy (it really didn't need the entire policy,
but it did need to be using has_privs_of_role()), and change the field
in pg_class to relrowsecurity from relhasrowsecurity, based on
Heikki's suggestion. Also from Heikki, only issue SET ROW_SECURITY in
pg_restore when talking to a 9.5+ server, list Bypass RLS in \du, and
document --enable-row-security options for pg_dump and pg_restore.
Lastly, fix a number of minor whitespace and typo issues from Heikki,
Dimitri, add a missing #include, per Peter E, fix a few minor
variable-assigned-but-not-used and resource leak issues from Coverity
and add tab completion for role attribute bypassrls as well.
Tom Lane [Wed, 24 Sep 2014 19:59:34 +0000 (15:59 -0400)]
Fix bogus variable-mangling in security_barrier_replace_vars().
This function created new Vars with varno different from varnoold, which
is a condition that should never prevail before setrefs.c does the final
variable-renumbering pass. The created Vars could not be seen as equal()
to normal Vars, which among other things broke equivalence-class processing
for them. The consequences of this were indeed visible in the regression
tests, in the form of failure to propagate constants as one would expect.
I stumbled across it while poking at bug #11457 --- after intentionally
disabling join equivalence processing, the security-barrier regression
tests started falling over with fun errors like "could not find pathkey
item to sort", because of failure to match the corrupted Vars to normal
ones.
Tom Lane [Wed, 24 Sep 2014 00:25:31 +0000 (20:25 -0400)]
Fix incorrect search for "x?" style matches in creviterdissect().
When the number of allowed iterations is limited (either a "?" quantifier
or a bound expression), the last sub-match has to reach to the end of the
target string. The previous coding here first tried the shortest possible
match (one character, usually) and then gave up and back-tracked if that
didn't work, typically leading to failure to match overall, as shown in
bug #11478 from Christoph Berg. The minimum change to fix that would be to
not decrement k before "goto backtrack"; but that would be a pretty stupid
solution, because we'd laboriously try each possible sub-match length
before finally discovering that only ending at the end can work. Instead,
force the sub-match endpoint limit up to the end for even the first
shortest() call if we cannot have any more sub-matches after this one.
Bug introduced in my rewrite that added the iterdissect logic, commit 173e29aa5deefd9e71c183583ba37805c8102a72. The shortest-first search code
was too closely modeled on the longest-first code, which hasn't got this
issue since it tries a match reaching to the end to start with anyway.
Back-patch to all affected branches.
Stephen Frost [Tue, 23 Sep 2014 01:51:25 +0000 (21:51 -0400)]
Add unicode_*_linestyle to \? variables
In a2dabf0 we added the ability to have single or double unicode
linestyle for the border, column, or header. Unfortunately, the
\? variables output was not updated for these new psql variables.
Stephen Frost [Tue, 23 Sep 2014 00:12:51 +0000 (20:12 -0400)]
Process withCheckOption exprs in setrefs.c
While withCheckOption exprs had been handled in many cases by
happenstance, they need to be handled during set_plan_references and
more specifically down in set_plan_refs for ModifyTable plan nodes.
This is to ensure that the opfuncid's are set for operators referenced
in the withCheckOption exprs.
Identified as an issue by Thom Brown
Patch by Dean Rasheed
Back-patch to 9.4, where withCheckOption was introduced.
Andres Freund [Mon, 22 Sep 2014 21:35:08 +0000 (23:35 +0200)]
Remove most volatile qualifiers from xlog.c
For the reason outlined in df4077cda2e also remove volatile qualifiers
from xlog.c. Some of these uses of volatile have been added after
noticing problems back when spinlocks didn't imply compiler
barriers. So they are a good test - in fact removing the volatiles
breaks when done without the barriers in spinlocks present.
Several uses of volatile remain where they are explicitly used to
access shared memory without locks. These locations are ok with
slightly out of date data, but removing the volatile might lead to the
variables never being reread from memory. These uses could also be
replaced by barriers, but that's a separate change of doubtful value.
Robert Haas [Mon, 22 Sep 2014 20:42:14 +0000 (16:42 -0400)]
Remove volatile qualifiers from lwlock.c.
Now that spinlocks (hopefully!) act as compiler barriers, as of commit 0709b7ee72e4bc71ad07b7120acd117265ab51d0, this should be safe. This
serves as a demonstration of the new coding style, and may be optimized
better on some machines as well.
Andres Freund [Mon, 22 Sep 2014 14:48:14 +0000 (16:48 +0200)]
Improve code around the recently added rm_identify rmgr callback.
There are four weaknesses in728f152e07f998d2cb4fe5f24ec8da2c3bda98f2:
* append_init() in heapdesc.c was ugly and required that rm_identify
return values are only valid till the next call. Instead just add a
couple more switch() cases for the INIT_PAGE cases. Now the returned
value will always be valid.
* a couple rm_identify() callbacks missed masking xl_info with
~XLR_INFO_MASK.
* pg_xlogdump didn't map a NULL rm_identify to UNKNOWN or a similar
string.
* append_init() was called when id=NULL - which should never actually
happen. But it's better to be careful.
Tom Lane [Fri, 19 Sep 2014 17:18:56 +0000 (13:18 -0400)]
Fix failure of contrib/auto_explain to print per-node timing information.
This has been broken since commit af7914c6627bcf0b0ca614e9ce95d3f8056602bf,
which added the EXPLAIN (TIMING) option. Although that commit included
updates to auto_explain, they evidently weren't tested very carefully,
because the code failed to print node timings even when it should, due to
failure to set es.timing in the ExplainState struct. Reported off-list by
Neelakanth Nadgir of Salesforce.
In passing, clean up the documentation for auto_explain's options a
little bit, including re-ordering them into what seems to me a more
logical order.
Robert Haas [Fri, 19 Sep 2014 16:39:00 +0000 (12:39 -0400)]
Add a fast pre-check for equality of equal-length strings.
Testing reveals that that doing a memcmp() before the strcoll() costs
practically nothing, at least on the systems we tested, and it speeds
up sorts containing many equal strings significatly.
Peter Geoghegan. Review by myself and Heikki Linnakangas. Comments
rewritten by me.
Stephen Frost [Fri, 19 Sep 2014 15:18:35 +0000 (11:18 -0400)]
Row-Level Security Policies (RLS)
Building on the updatable security-barrier views work, add the
ability to define policies on tables to limit the set of rows
which are returned from a query and which are allowed to be added
to a table. Expressions defined by the policy for filtering are
added to the security barrier quals of the query, while expressions
defined to check records being added to a table are added to the
with-check options of the query.
New top-level commands are CREATE/ALTER/DROP POLICY and are
controlled by the table owner. Row Security is able to be enabled
and disabled by the owner on a per-table basis using
ALTER TABLE .. ENABLE/DISABLE ROW SECURITY.
Per discussion, ROW SECURITY is disabled on tables by default and
must be enabled for policies on the table to be used. If no
policies exist on a table with ROW SECURITY enabled, a default-deny
policy is used and no records will be visible.
By default, row security is applied at all times except for the
table owner and the superuser. A new GUC, row_security, is added
which can be set to ON, OFF, or FORCE. When set to FORCE, row
security will be applied even for the table owner and superusers.
When set to OFF, row security will be disabled when allowed and an
error will be thrown if the user does not have rights to bypass row
security.
Per discussion, pg_dump sets row_security = OFF by default to ensure
that exports and backups will have all data in the table or will
error if there are insufficient privileges to bypass row security.
A new option has been added to pg_dump, --enable-row-security, to
ask pg_dump to export with row security enabled.
A new role capability, BYPASSRLS, which can only be set by the
superuser, is added to allow other users to be able to bypass row
security using row_security = OFF.
Many thanks to the various individuals who have helped with the
design, particularly Robert Haas for his feedback.
Authors include Craig Ringer, KaiGai Kohei, Adam Brightwell, Dean
Rasheed, with additional changes and rework by me.
Reviewers have included all of the above, Greg Smith,
Jeff McCormick, and Robert Haas.
Andres Freund [Fri, 19 Sep 2014 15:04:00 +0000 (17:04 +0200)]
Mark x86's memory barrier inline assembly as clobbering the cpu flags.
x86's memory barrier assembly was marked as clobbering "memory" but
not "cc" even though 'addl' sets various flags. As it turns out gcc on
x86 implicitly assumes "cc" on every inline assembler statement, so
it's not a bug. But as that's poorly documented and might get copied
to architectures or compilers where that's not the case, it seems
better to be precise.
Andres Freund [Fri, 19 Sep 2014 14:33:16 +0000 (16:33 +0200)]
Add the capability to display summary statistics to pg_xlogdump.
The new --stats/--stats=record options to pg_xlogdump display per
rmgr/per record statistics about the parsed WAL. This is useful to
understand what the WAL primarily consists of, to allow targeted
optimizations on application, configuration, and core code level.
It is likely that we will want to fine tune the statistics further,
but the feature already is quite helpful.
Author: Abhijit Menon-Sen, slightly editorialized by me Reviewed-By: Andres Freund, Dilip Kumar and Furuya Osamu
Discussion: 20140604104716.GA3989@toroid.org
Andres Freund [Fri, 19 Sep 2014 13:17:12 +0000 (15:17 +0200)]
Add rmgr callback to name xlog record types for display purposes.
This is primarily useful for the upcoming pg_xlogdump --stats feature,
but also allows to remove some duplicated code in the rmgr_desc
routines.
Due to the separation and harmonization, the output of dipsplayed
records changes somewhat. But since this isn't enduser oriented
content that's ok.
It's potentially desirable to further change pg_xlogdump's display of
records. It previously wasn't possible to show the record type
separately from the description forcing it to be in the last
column. But that's better done in a separate commit.
Author: Abhijit Menon-Sen, slightly editorialized by me Reviewed-By: Álvaro Herrera, Andres Freund, and Heikki Linnakangas
Discussion: 20140604104716.GA3989@toroid.org
Andres Freund [Thu, 18 Sep 2014 07:59:10 +0000 (09:59 +0200)]
Fix configure check for %z printf support after INT64_MODIFIER changes.
The PGAC_FUNC_SNPRINTF_SIZE_T_SUPPORT test was broken by ce486056ecd28050. Among others it made the UINT64_FORMAT macro to be
defined in c.h, instead of directly being defined by configure.
This lead to the replacement printf being used on all platforms for a
while. Which seems to work, because this was only used due to
different profiles ;)
Peter Eisentraut [Wed, 17 Sep 2014 04:54:12 +0000 (00:54 -0400)]
Fix TAP checks when current directory name contains spaces
Add some quotes in the makefile snippet that creates the temporary
installation, so that it can handle spaces in the directory name and
possibly some other oddities.
Fix the return type of GIN triConsistent support functions to "char".
They were marked to return a boolean, but they actually return a
GinTernaryValue, which is more like a "char". It makes no practical
difference, as the triConsistent functions cannot be called directly from
SQL because they have "internal" arguments, but this nevertheless seems
more correct.
Also fix the GinTernaryValue name in the documentation. I renamed the enum
earlier, but neglected the docs.
Alexander Korotkov. This is new in 9.4, so backpatch there.
Follow the RFCs more closely in libpq server certificate hostname check.
The RFCs say that the CN must not be checked if a subjectAltName extension
of type dNSName is present. IOW, if subjectAltName extension is present,
but there are no dNSNames, we can still check the CN.
Tom Lane [Sun, 14 Sep 2014 01:01:49 +0000 (21:01 -0400)]
Invent PGC_SU_BACKEND and mark log_connections/log_disconnections that way.
This new GUC context option allows GUC parameters to have the combined
properties of PGC_BACKEND and PGC_SUSET, ie, they don't change after
session start and non-superusers can't change them. This is a more
appropriate choice for log_connections and log_disconnections than their
previous context of PGC_BACKEND, because we don't want non-superusers
to be able to affect whether their sessions get logged.
Note: the behavior for log_connections is still a bit odd, in that when
a superuser attempts to set it from PGOPTIONS, the setting takes effect
but it's too late to enable or suppress connection startup logging.
It's debatable whether that's worth fixing, and in any case there is
a reasonable argument for PGC_SU_BACKEND to exist.
In passing, re-pgindent the files touched by this commit.
Fujii Masao, reviewed by Joe Conway and Amit Kapila
Peter Eisentraut [Sun, 14 Sep 2014 00:14:17 +0000 (20:14 -0400)]
Run missing documentation tools through "missing"
Instead of just erroring out when a tool is missing, wrap the call with
the "missing" script that we are already using for bison, flex, and
perl, so that the users get a useful error message.
Robert Haas [Fri, 12 Sep 2014 20:11:58 +0000 (16:11 -0400)]
Change NTUP_PER_BUCKET to 1 to improve hash join lookup speed.
Since this makes the bucket headers use ~10x as much memory, properly
account for that memory when we figure out whether everything fits
in work_mem. This might result in some cases that previously used
only a single batch getting split into multiple batches, but it's
unclear as yet whether we need defenses against that case, and if so,
what the shape of those defenses should be.
It's worth noting that even in these edge cases, users should still be
no worse off than they would have been last week, because commit 45f6240a8fa9d35548eb2ef23dba2c11540aa02a saved a big pile of memory
on exactly the same workloads.
Tomas Vondra, reviewed and somewhat revised by me.
Add GUC to enable logging of replication commands.
Previously replication commands like IDENTIFY_COMMAND were not logged
even when log_statements is set to all. Some users who want to audit
all types of statements were not satisfied with this situation. To
address the problem, this commit adds new GUC log_replication_commands.
If it's enabled, all replication commands are logged in the server log.
There are many ways to allow us to enable that logging. For example,
we can extend log_statement so that replication commands are logged
when it's set to all. But per discussion in the community, we reached
the consensus to add separate GUC for that.
Reviewed by Ian Barwick, Robert Haas and Heikki Linnakangas.
Stephen Frost [Fri, 12 Sep 2014 16:04:37 +0000 (12:04 -0400)]
Add unicode_{column|header|border}_style to psql
With the unicode linestyle, this adds support to control if the
column, header, or border style should be single or double line
unicode characters. The default remains 'single'.
In passing, clean up the border documentation and address some
minor formatting/spelling issues.
Pavel Stehule, with some additional changes by me.
Stephen Frost [Fri, 12 Sep 2014 15:11:53 +0000 (11:11 -0400)]
Handle border = 3 in expanded mode
In psql, expanded mode was not being displayed correctly when using
the normal ascii or unicode linestyles and border set to '3'. Now,
per the documentation, border '3' is really only sensible for HTML
and LaTeX formats, however, that's no excuse for ascii/unicode to
break in that case, and provisions had been made for psql to cleanly
handle this case (and it did, in non-expanded mode).
This was broken when ascii/unicode was initially added a good five
years ago because print_aligned_vertical_line wasn't passed in the
border setting being used by print_aligned_vertical but instead was
given the whole printTableContent. There really isn't a good reason
for vertical_line to have the entire printTableContent structure, so
just pass in the printTextFormat and border setting (similar to how
this is handled in horizontal_line).
Support Subject Alternative Names in SSL server certificates.
This patch makes libpq check the server's hostname against DNS names listed
in the X509 subjectAltName extension field in the server certificate. This
allows the same certificate to be used for multiple domain names. If there
are no SANs in the certificate, the Common Name field is used, like before
this patch. If both are given, the Common Name is ignored. That is a bit
surprising, but that's the behavior mandated by the relevant RFCs, and it's
also what the common web browsers do.
This also adds a libpq_ngettext helper macro to allow plural messages to be
translated in libpq. Apparently this happened to be the first plural message
in libpq, so it was not needed before.
The code that tried to split a page at 75/25 ratio, when appending to the
end of an index, was buggy in two ways. First, there was a silly typo that
caused it to just fill the left page as full as possible. But the logic as
it was intended wasn't correct either, and would actually have given a ratio
closer to 60/40 than 75/25.
Gaetano Mendola spotted the typo. Backpatch to 9.4, where this code was added.
Tom Lane [Fri, 12 Sep 2014 03:30:51 +0000 (23:30 -0400)]
Fix power_var_int() for large integer exponents.
The code for raising a NUMERIC value to an integer power wasn't very
careful about large powers. It got an outright wrong answer for an
exponent of INT_MIN, due to failure to consider overflow of the Abs(exp)
operation; which is fixable by using an unsigned rather than signed
exponent value after that point. Also, even though the number of
iterations of the power-computation loop is pretty limited, it's easy for
the repeated squarings to result in ridiculously enormous intermediate
values, which can take unreasonable amounts of time/memory to process,
or even overflow the internal "weight" field and so produce a wrong answer.
We can forestall misbehaviors of that sort by bailing out as soon as the
weight value exceeds what will fit in int16, since then the final answer
must overflow (if exp > 0) or underflow (if exp < 0) the packed numeric
format.
Per off-list report from Pavel Stehule. Back-patch to all supported
branches.
Peter Eisentraut [Fri, 12 Sep 2014 01:08:59 +0000 (21:08 -0400)]
Fix vacuumdb --analyze-in-stages --all order
When running vacuumdb --analyze-in-stages --all, it needs to run the
first stage across all databases before the second one, instead of
running all stages in a database before processing the next one.
Also respect the --quiet option with --analyze-in-stages.
Stephen Frost [Fri, 12 Sep 2014 01:23:51 +0000 (21:23 -0400)]
Add 'ignore_nulls' option to row_to_json
Provide an option to skip NULL values in a row when generating a JSON
object from that row with row_to_json. This can reduce the size of the
JSON object in cases where columns are NULL without really reducing the
information in the JSON object.
This also makes row_to_json into a single function with default values,
rather than having multiple functions. In passing, change array_to_json
to also be a single function with default values (we don't add an
'ignore_nulls' option yet- it's not clear that there is a sensible
use-case there, and it hasn't been asked for in any case).
Simplify calculation of Poisson distributed delays in pgbench --rate mode.
The previous coding first generated a uniform random value between 0.0 and
1.0, then converted that to an integer between 1 and 10000, and divided that
again by 10000. Those conversions are unnecessary; we can use the double
value that pg_erand48() returns directly. While we're at it, put the logic
into a helper function, getPoissonRand().
The largest delay generated by the old coding was about 9.2 times the
average, because of the way the uniformly distributed value used for the
calculation was truncated to 1/10000 granularity. The new coding doesn't
have such clamping. With my laptop's DBL_MIN value, the maximum delay with
the new coding is about 700x the average. That seems acceptable - any
reasonable pgbench session should last long enough to average that out.
Change the way latency is calculated with pgbench --rate option.
The reported latency values now include the "schedule lag" time, that is,
the time between the transaction's scheduled start time and the time it
actually started. This relates better to a model where requests arrive at a
certain rate, and we are interested in the response time to the end user or
application, rather than the response time of the database itself.
Also, when --rate is used, include the schedule lag time in the log output.
The --rate option is new in 9.4, so backpatch to 9.4. It seems better to
make this change in 9.4, while we're still in the beta period, than ship a
9.4 version that calculates the values differently than 9.5.
Peter Eisentraut [Thu, 11 Sep 2014 00:05:56 +0000 (20:05 -0400)]
Support older versions of "prove"
Apparently, older versions of "prove" (couldn't identify the exact
version from the changelog) don't look into the t/ directory for tests
by default, so specify it explicitly.