sr55 [Mon, 30 Jun 2008 14:24:47 +0000 (14:24 +0000)]
WinGui:
- Queue system moved into it's own class.
- Queue now uses a listview display instead of a simple list. It now displays some information about each encode instead of the CLI String.
- Misc other Fixes.
van [Mon, 30 Jun 2008 05:01:01 +0000 (05:01 +0000)]
- fix an error in the SCR calculation that would cause an extra frame to be dropped at an SCR discontinuity.
- fix a rounding error in the encx264 init_delay computation that would underestimate the delay for progressive content and cause spurious "init_delay too small" messages.
- clean up the sync.c "video time didn't advance" logic and try to make the error mgs more useful for debugging frame duration problems.
van [Mon, 30 Jun 2008 04:32:49 +0000 (04:32 +0000)]
If we always require a buffer to be available on every fifo we'll eventually deadlock since video and audio run at different rates. Instead take the earliest available buffer (so we don't starve any of the fifos) but don't lock up if fifos are occasionally empty.
sr55 [Fri, 27 Jun 2008 14:42:17 +0000 (14:42 +0000)]
WinGui:
- Added: Resolution calculation for non anamorphic encodes in the GUI.
- Added: Ability to minimize to the system tray. Includes popup notifications of encoding status.
- Added: Duration calculation based on Title and selected chapters.
- Added: Some more code comments and summaries
- Change: Activity window now only refreshes if there is an active HandBrakeCLI.exe running.
- Change: Browse button/ File mode checkbox for Source Selection Removed. Replaced with a Source Dropdown button in the main toolbar. (works a bit like the magui but still uses the 2 different dialog boxes)
- Change: Removed "Recommended Crop" label and simply let the dropdown set the cropping values. Added DVD resolution Label.
- Fixed: Preset loader now selects longest title and set's chapters to Auto. Before it would load in the last setting used which is bad.
- Fixed bug in the presetLoader() function with the 2nd audio channel track selection.
Final Note: Quite a bit of code has been moved around in this checkin to clear things up a bit.
saintdev [Thu, 26 Jun 2008 01:19:47 +0000 (01:19 +0000)]
Fix a crash when using mp4 and no audio tracks.
Because there were no audio structs on list_audio, audio->config was attempting
to dereference a NULL pointer.
dynaflash [Wed, 25 Jun 2008 12:41:53 +0000 (12:41 +0000)]
MacGui: Replace valueForKey with objectForKey when accessing the NSDictionary in presets. Though this makes no functional difference, it is more consistent. Patch by blindjimmy. http://forum.handbrake.fr/viewtopic.php?f=4&t=6418
van [Mon, 23 Jun 2008 06:18:33 +0000 (06:18 +0000)]
Don't let cropping get fooled by dark content - make sure that we only crop a row or column if all pixels are within one quantization level of average value & average value is within one level of black. (fix for bug discussed in http://forum.handbrake.fr/viewtopic.php?f=12&t=6335)
eddyg [Thu, 19 Jun 2008 04:23:52 +0000 (04:23 +0000)]
Reintroduce Solaris support. Fully tested on everything - apart from Windows, which really shouldn't be affected. Note that I've disabled troublesome components in ffmpeg that didn't work with Solaris. And disabled X support in libmpeg2 for all platforms - 'cos it shouldn't have been there.
sr55 [Tue, 17 Jun 2008 12:53:40 +0000 (12:53 +0000)]
WinGui:
- Issue in the query parser where "-2" would trigger a widget if found anywhere in the CLI string.
This could appear in the source or destination filename and trigger it when it is not supposed to be on.
added a space before the - in the regex which will hopefully be sufficient to fix the issue.
jbrjake [Sun, 15 Jun 2008 15:13:00 +0000 (15:13 +0000)]
Updates the Mac->CLI preset conversion script to handle the new keys for separate audio settings, and rearranges a little code in the CLI so the audio track settings are easier to generate.
van [Thu, 12 Jun 2008 08:12:18 +0000 (08:12 +0000)]
- put the "find a usable frame rate" logic in the place that actually computes decoder frame durations rather than just in the bitstream info routine.
- start adding some comments describing how this horrible mess works.
dynaflash [Sun, 8 Jun 2008 21:49:14 +0000 (21:49 +0000)]
Update x264 to x264-r877-c74a8e2
- Eliminates the need for our last vbv 2 pass patch
- Updated reporting on processor optimizations
- 5 - 10 % faster trellis
- assorted improved cpu optimizations
dynaflash [Fri, 6 Jun 2008 18:20:45 +0000 (18:20 +0000)]
MacGui: Update Built in Presets to use new audio track layout and remove deprecated Codecs key value.
- Update your built in presets for this to take effect.
- Note: Since the preset code regresses there should be no functional difference noticed in the macgui.
dynaflash [Fri, 6 Jun 2008 16:48:36 +0000 (16:48 +0000)]
MacGui: fix issues with audio in presets
- Change audio track behavior so that presets only set the audio tracks it has stored, and removes any other previously selected audio tracks
- Prevents a scenario whereby selecting the ATV preset then the iPod preset results in two identical audio tracks for the iPod
- Fix an issue where certain mixdowns and bitrates contained in a preset may not be available depending on a source which resulted in no selection.
jbrjake [Thu, 5 Jun 2008 15:59:24 +0000 (15:59 +0000)]
Adds a job->cfr boolean to indicate "encode this with a constant frame rate" instead of passing through the true frame durations from the source. Includes CLI implementation, which sets cfr to 1 if the user specifies a frame rate. Otherwise, it uses "same as source" frame rate.
dynaflash [Wed, 4 Jun 2008 19:58:25 +0000 (19:58 +0000)]
MacGui: Add "Auto" to audio sample rate selections
- Auto simply uses the input audio's sample rate
- Built in presets updated to use Auto for all but device presets which still use 48.
- prepareJob now uses the selectedIndex's tag from the sample rate NSPopUp instead of libhb's built in array of sample rates
ritsuka [Wed, 4 Jun 2008 18:54:56 +0000 (18:54 +0000)]
MacGUI: Implements a part of the NSTableView delegate in ChapterTitles so that pressing Return selects the next row and edits the chapter title so that the mouse or Mac OS X's full keyboard access is not required. Patch by bkiico517.
van [Wed, 4 Jun 2008 07:00:01 +0000 (07:00 +0000)]
- add pixel_aspect_ratio reporting to the mpeg decoder
- try lots harder to extract a useful video frame rate from libavcodec (successful for more files but still get junk from wmv's).
- save all video parameters while we're getting previews then use the set we've seen most frequently as the parameters of the title.
dynaflash [Sat, 31 May 2008 19:20:22 +0000 (19:20 +0000)]
x264: bump to version 859-ce13bb6 and update vbv patch(es)
- Updates the 2 pass patch to Gabriel Bouvigne's v.10 vbv 2 pass patch http://article.gmane.org/gmane.comp.video.x264.devel/4048
- Eliminates the need for our previous 1 pass patch
dynaflash [Thu, 29 May 2008 19:09:32 +0000 (19:09 +0000)]
MacGui: Add decomb setting to presets
- Even though currently in svn we allow for a custom setting, only observe Off and Default. So if a preset is created using "Custom" in the decomb NSPopUp the preset will actually use Default, so you will have to set it back to Custom manually.
- This is temporary as the "Custom" setting *should* be deprecated at some point.
jbrjake [Wed, 21 May 2008 18:34:35 +0000 (18:34 +0000)]
When using detelecine but not dropping frames (non-VFR detelecine), continue looping through the filter chain if the detelecine filter says to drop a frame.
jbrjake [Sat, 17 May 2008 22:55:41 +0000 (22:55 +0000)]
Re-allow constant frame rates. The MacGui should probably be updated to always use title fps for VFR instead of "Same as Source" which might be 23.976, but it's taken care of in work.c now so it's purely a cosmetic thing.
jbrjake [Tue, 13 May 2008 14:55:56 +0000 (14:55 +0000)]
Allow the user to directly set a pixel aspect height and width, instead of using the autodetection in strict and loose anamorphic. This allows rescaling 1:1 PAR material to be anamorphic.
To use in an interface, simply set job->pixel_ratio to 3, job->height and job->width to the desired output size, and job->pixel_aspect_height and job->pixel_aspect_width to the desired PAR. For now this is only for really advanced users who know what numbers they want for those values.
Controlled through the CLI as optional arguments to -P.
jbrjake [Fri, 9 May 2008 15:08:11 +0000 (15:08 +0000)]
- Use a separate Sparkle appcast feed for unstable (snapshot) releases.
- Use variables in the macosx/HandBrake.plist so SVN doesn't flag it as modified every time the dynamically generated build date/version changes. (Thanks, blindjimmy!)
sr55 [Wed, 7 May 2008 21:56:43 +0000 (21:56 +0000)]
WinGui:
- Activity window no longer prevents main window UI interaction.
- Fixed bug which would keep HandBrake in memory after the program was closed. It was still running but not visible.
- Removed old files
sr55 [Wed, 7 May 2008 20:43:49 +0000 (20:43 +0000)]
WinGui:
- Got rid of the DVD info window. DVD information can now be read from the activity window.
- Removed some unused code calls to frmDvdInfo.
- Changed frmActivityWindow design, removed all buttons, text window now expands as the window size grows. Basically, the window is identical to the MacGUI window now.
projects / handbrake / log