arc_summary and dbufstat should have two spaces
after their last function definitions.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5881
Enable shellcheck to run on zed scripts,
paxcheck.sh, zfs-tests.sh, zfs.sh, and zloop.sh.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5812
Chunwei Chen [Wed, 8 Mar 2017 17:26:33 +0000 (09:26 -0800)]
Fix nfs snapdir automount
The current implementation for allowing nfs to access snapdir is very buggy.
It uses a special fh for snapdirs, such that the next time nfsd does
fh_to_dentry, it actually returns the root inode inside the snapshot. So nfsd
never knows it cross a mountpoint.
The problem is that nfsd will not hold a reference on the vfsmount of the
snapshot. This cause auto unmounter to unmount the snapshot even though nfs is
still holding dentries in it.
To fix this, we return the inode for the snapdirs themselves. However, we also
trigger automount upon fh_to_dentry, and return ESTALE so nfsd will revalidate
and see the mountpoint and do crossmnt.
Because nfsd will now be aware that these are different filesystems users
must add crossmnt to their export options to access snapshot directories.
Tony Hutter [Wed, 8 Mar 2017 17:20:21 +0000 (09:20 -0800)]
Fix harmless "BARRIER is deprecated" kernel warning on Centos 6.8
A one time warning after module load that "BARRIER is deprecated" was seen
on the heavily patched 2.6.32-642.13.1.el6.x86_64 Centos 6.8 kernel. It seems
that kernel had both the old BARRIER and the newer FLUSH/FUA interfaces
defined. This fixes the warning by prefering the newer FLUSH/FUA interface
if it's available.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5739
Closes #5828
Andriy Gapon [Mon, 27 Feb 2017 22:47:33 +0000 (14:47 -0800)]
OpenZFS 7867 - ARC space accounting leak
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Tim Chase <tim@chase2k.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7867
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/aa1f740d
Closes #5874
bunder2015 [Tue, 7 Mar 2017 21:01:39 +0000 (16:01 -0500)]
Corrected highlight for zpool man page
SS is already highlighted and the fB/fR tags break the highlighting
prematurely, removing the tags highlights the entire line.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #5873
bunder2015 [Tue, 7 Mar 2017 17:54:55 +0000 (12:54 -0500)]
Fix multi-line error messages in blkdev_compat.h
Fix multi-line error messages in blkdev_compat.h by changing
error-generating multi-line error messages to single line errors.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: bunder2015 <omfgbunder@gmail.com>
Closes #5860
OpenZFS 7793 - ztest fails assertion in dmu_tx_willuse_space
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
Background information: This assertion about tx_space_* verifies that we
are not dirtying more stuff than we thought we would. We “need” to know
how much we will dirty so that we can check if we should fail this
transaction with ENOSPC/EDQUOT, in dmu_tx_assign(). While the
transaction is open (i.e. between dmu_tx_assign() and dmu_tx_commit() —
typically less than a millisecond), we call dbuf_dirty() on the exact
blocks that will be modified. Once this happens, the temporary
accounting in tx_space_* is unnecessary, because we know exactly what
blocks are newly dirtied; we call dnode_willuse_space() to track this
more exact accounting.
The fundamental problem causing this bug is that dmu_tx_hold_*() relies
on the current state in the DMU (e.g. dn_nlevels) to predict how much
will be dirtied by this transaction, but this state can change before we
actually perform the transaction (i.e. call dbuf_dirty()).
This bug will be fixed by removing the assertion that the tx_space_*
accounting is perfectly accurate (i.e. we never dirty more than was
predicted by dmu_tx_hold_*()). By removing the requirement that this
accounting be perfectly accurate, we can also vastly simplify it, e.g.
removing most of the logic in dmu_tx_count_*().
The new tx space accounting will be very approximate, and may be more or
less than what is actually dirtied. It will still be used to determine
if this transaction will put us over quota. Transactions that are marked
by dmu_tx_mark_netfree() will be excepted from this check. We won’t make
an attempt to determine how much space will be freed by the transaction
— this was rarely accurate enough to determine if a transaction should
be permitted when we are over quota, which is why dmu_tx_mark_netfree()
was introduced in 2014.
We also won’t attempt to give “credit” when overwriting existing blocks,
if those blocks may be freed. This allows us to remove the
do_free_accounting logic in dbuf_dirty(), and associated routines. This
logic attempted to predict what will be on disk when this txg syncs, to
know if the overwritten block will be freed (i.e. exists, and has no
snapshots).
Porting notes:
- DNODE_SIZE replaced with DNODE_MIN_SIZE in dmu_tx_count_dnode(),
Using the default dnode size would be slightly better.
- DEBUG_DMU_TX wrappers and configure option removed.
- Resolved _by_dnode() conflicts these changes have not yet been
applied to OpenZFS.
OpenZFS 7843 - get_clones_stat() is suboptimal for lots of clones
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov>
OpenZFS-issue: https://www.illumos.org/issues/7843
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4d519e7
Closes #5868
Olaf Faaland [Tue, 7 Mar 2017 00:01:45 +0000 (16:01 -0800)]
Dump unique configurations and Uberblocks in zdb -lu
For zdb -l, detect when the configuration nvlist in some label l (l>0)
is the same as a configuration already dumped. If so, do not dump it.
Make a similar check when dumping Uberblocks for zdb -lu. Check whether
a label already dumped contains an identical Uberblock. If so, do not
dump the Uberblock.
When dumping a configuration or Uberblock, state which labels it is
found in (0-3), for example: labels = 1 2 3
Detecting redundant uberblocks or configurations is accomplished by
calculating checksums of the uberblocks and the packed nvlists
containing the configuration.
If there is nothing unique to be dumped for a label (ie the
configuration and uberblocks have checksums matching those already
dumped) print nothing for that label.
With additional l's or u's, increase verbosity as follows:
-l Dump each unique configuration only once.
Indicate which labels it appears in.
-ll In addition, dump label space usage stats.
-lll Dump every configuration, unique or not.
-u Dump each unique, valid, uberblock only once.
Indicate which labels it appears in.
-uu In addition, state which slots are invalid.
-uuu Dump every uberblock, unique or not.
-uuuu Dump the uberblock blockpointer (used to be -uuu)
Make exit values conform to the manual page. Failing to unpack a
configuration nvlist is considered an error, as well as failing to open
or read from the device.
Add three tests, zdb_00{3,4,5}_pos to verify the above functionality.
Reviewed-by: Tim Chase <tim@chase2k.com> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5738
Chunwei Chen [Mon, 6 Mar 2017 17:20:20 +0000 (09:20 -0800)]
Fix loop device becomes read-only
Commit 933ec99 removes read and write from f_op because the vfs layer will
select iter_write or aio_write automatically. However, for Linux <= 4.0,
loop_set_fd will actually check f_op->write and set read-only if not exists.
This patch add them back and use the generic do_sync_{read,write} for
aio_{read,write} and new_sync_{read,write} for {read,write}_iter.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5776
Closes #5855
Unlike other architectures which sanitize the LDFLAGS from the
environment in arch/<arch>/Makefile. The powerpc Makefile
allows LDFLAGS to be passed through resulting in the following
build failure.
/usr/bin/ld: unrecognized option '-Wl,-z,relro'
LDFLAGS is set in /usr/lib/rpm/redhat/macros by default. Clear
the environment variable when building kmods for powerpc.
Additionally, now that ppc64le exists it's not longer safe to
assume a powerpc system is big endian. Rely on the endianness
provided by the compiler.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5856
Reduce size of zvol and enforce 4k blocksize in zvol tests
32-bit builders in the buildbot are having trouble completing
their ENOSPC testing in less than the timeout. Reduce the
zvol size and use a 4k block size to reduce read-modify-writes
which are particularly expensive on 32-bit systems due to the
reduced maximum ARC size.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Kash Pande <kash@tripleback.net> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5845
Sydney Vanda [Fri, 23 Sep 2016 20:51:08 +0000 (13:51 -0700)]
Add auto-online test for ZED/FMA as part of the ZTS
Automated auto-online test to go along with ZED FMA integration (PR 4673)
auto_online_001.pos works with real devices (sd- and mpath) and with non-real
block devices (loop) by adding a scsi_debug device to the pool
Note: In order for test group to run, ZED must not currently be running.
Kernel 3.16.37 or higher needed for scsi_debug to work properly
If timeout occurs on test using a scsi_debug device (error noticed on Ubuntu
system), a reboot might be needed in order for test to pass. (more
investigation into this)
Also suppressed output from is_real_device/is_loop_device/is_mpath_device -
was making the log file very cluttered with useless error messages
"ie /dev/mapper/sdc is not a block device" from previous patch
Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: David Quigley <david.quigley@intel.com> Signed-off-by: Sydney Vanda <sydney.m.vanda@intel.com>
Closes #5774
Olaf Faaland [Wed, 1 Mar 2017 00:10:18 +0000 (16:10 -0800)]
Linux 4.11 compat: avoid refcount_t name conflict
Linux 4.11 introduces a new type, refcount_t, which conflicts with the
type of the same name defined within ZFS.
Rename the ZFS type zfs_refcount_t. Within the ZFS code, use a macro to
cause references to refcount_t to be changed to zfs_refcount_t at
compile time. This reduces conflicts when later landing OpenZFS
patches.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5823
Closes #5842
Matt Kemp [Mon, 27 Feb 2017 20:03:23 +0000 (14:03 -0600)]
Fix initramfs hook for merged /usr/lib and /lib
Under a merged `/lib` -> `/usr/lib` which renders `/lib` as a symlink,
`find /lib -type f -name libgcc_s.so.1` will not return a result as
`find` will not traverse the symlink. Modifying it to `find /lib/ -type
f -name libgcc_s.so.1` should work for both symlinked and non-symlinked
`/lib` directories.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matt Kemp <matt@mattikus.com>
Closes #5834
Matthew Ahrens [Fri, 24 Feb 2017 21:34:26 +0000 (13:34 -0800)]
Clean up by-dnode code in dmu_tx.c
https://github.com/zfsonlinux/zfs/commit/0eef1bde31d67091d3deed23fe2394f5a8bf2276
introduced some changes which we slightly improved the style of when
porting to illumos.
There is also one minor error-handling fix, in zap_add() the "zap" may
become NULL in case of an error re-opening the ZAP.
Originally suggested at: https://github.com/openzfs/openzfs/pull/276
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com> Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5805
Isaac Huang [Fri, 24 Feb 2017 20:05:42 +0000 (13:05 -0700)]
ABD style cleanups
The commit a6255b7fce400d485a0e87cbe369aa0ed7dc5dc4 removed a few
assertions which help catch errors and improve code readability. It also
duplicated two conditionals, which was unnecessary and made the code
confusing to read. This patch cleans it up.
Reviewed-by: David Quigley <david.quigley@intel.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5802
Tim Crawford [Fri, 24 Feb 2017 19:29:47 +0000 (14:29 -0500)]
Fix checksumflags assignment in cksummer
drr_checksumflags was incorrectly set to drr_checksumtype.
Reviewed-by: Matt Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Tim Crawford <tcrawford@datto.com>
Closes #5830
Authored by: Ahmed G <ahmedg@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Stephen Blinick <stephen.blinick@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes:
- Using $FIO until 7290 is ported.
Daniel Hoffman [Fri, 17 Feb 2017 19:48:20 +0000 (11:48 -0800)]
OpenZFS 7812 - Remove gender specific language
Authored by: Daniel Hoffman <dj.hoffman@delphix.com>
Reviewed by: Matt Ahrens <mahrens@delphix.com>
Reviewed by: Prakash Surya <prakash.surya@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <igor@dilos.org>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Reviewed by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
This change removes all gendered language that did not refer specifically
to an individual person or pet. The convention taken was to use
variations on "they" when referring to users and/or human beings, while
using "it" when referring to code, functions, and/or libraries.
Additionally, we took the liberty to fix up any whitespace issues that
were found in any files that were already being modified.
Andriy Gapon [Mon, 21 Nov 2016 23:09:54 +0000 (15:09 -0800)]
OpenZFS 7199 - dsl_dataset_rollback_sync may try to free already free blocks
7200 no blocks must be born in a txg after a snaphot is created
Authored by: Andriy Gapon <andriy.gapon@clusterhq.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Brad Lewis <brad.lewis@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7199
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/bfaed0b
Closes #5817
Matthew Ahrens [Sat, 24 Sep 2016 03:44:15 +0000 (20:44 -0700)]
OpenZFS 7337 - inherit_001_pos occasionally times out
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7337
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b021ac0
Closes #5800
Porting notes:
- Additional code refactor for better Zol and OpenZFS codebase sync
Add a -t flag to zfs-tests to allow a user
to run a single test by providing the path
to the test relative to STF_SUITE.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5775
Isaac Huang [Thu, 23 Feb 2017 18:32:15 +0000 (11:32 -0700)]
Fix incorrect spare vdev state after replacing
After a hot spare replaces an OFFLINE vdev, the new
parent spare vdev state is set incorrectly to OFFLINE.
The correct state should be DEGRADED. The incorrect
OFFLINE state will prevent top-level vdev from reading
the spare vdev, thus causing unnecessary reconstruction.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Isaac Huang <he.huang@intel.com>
Closes #5766
Closes #5770
If the LED is being accessed by another process when we try to update
it, the update will be lost. Add a retry loop which will read the state
of the LED and update it until the LED is in the correct state. The
number of times this will occur is limited to ensure that the ZEDlet
won't hang ZED.
Refactor to remove duplication so setting of the LED occurs in only one
place.
Cleanup a couple of the warnings generated by shellcheck which weren't
the result of specific choices by the author. Several notes and warnings
are still present but removing them would make the code less clear or
require adding lines to tell shellcheck to ignore the warning.
Remove ",i" from the documentation at the top of the file which appears
to be a typographic error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Signed-off-by: Christopher Voltz <christopher.voltz@hpe.com>
Closes #5795
Hans Rosenfeld [Thu, 26 May 2016 15:32:26 +0000 (17:32 +0200)]
OpenZFS 7001 - zvol_misc tests should not depend on /sbin or /usr/sbin being in PATH
Authored by: Hans Rosenfeld <hans.rosenfeld@nexenta.com>
Reviewed by: Toomas Soome <tsoome@me.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7001
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/258c9c7
Closes #5801
Porting notes:
- Most of the changes were previously applied.
Matthew Ahrens [Wed, 15 Feb 2017 23:49:33 +0000 (15:49 -0800)]
zfs_arc_num_sublists_per_state should be common to all multilists
The global tunable zfs_arc_num_sublists_per_state is used by the ARC and
the dbuf cache, and other users are planned. We should change this
tunable to be common to all multilists. This tuning may be overridden
on a per-multilist basis.
Reviewed-by: Pavel Zakharov <pavel.zakharov@delphix.com> Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5764
Matthew Ahrens [Sun, 15 May 2016 15:09:13 +0000 (08:09 -0700)]
OpenZFS 6404 - zvol_swap_006_pos can occasionally fail due to swaplen being < 16
Authored by: Matthew Ahrens <mahrens@delphix.com>
6405 zvol test setup is non deterministic
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: John Kennedy <john.kennedy@delphix.com>
Reviewed by: Will Andrews <will@freebsd.org>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6404
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/24e268f
Closes #5792
Porting notes:
- Converted zfs to $ZFS until OpenZFS 7290 is ported.
openzfs/openzfs@1d32ba6
Google moved their style guides to GitHub. Update the shell style guide
URL to the new location.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Christopher Voltz <christopher.voltz@hpe.com>
Closes #5797
OpenZFS 7260 - disable libdiskmgmt in zfstest unless it's required
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7260
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/447b1e1
Closes #5794
Porting notes:
- The library libdiskmgmt is specific to illumos so these changes
currently have no impact under Linux. This mechanism could be
potentially leveraged in the future.
Olaf Faaland [Mon, 13 Feb 2017 23:30:22 +0000 (15:30 -0800)]
Use file-based pools for zpool_expand test 002 and enable it
Use -pH flags in get_pool_prop so that numeric properties such as size
can be compared. The zpool_expand test suite is currently the only one
which uses get_pool_prop for a numeric property.
Add TEMPFILE and TEMPFILE{0,1,2} to default.cfg for tests that must
build pools on top of files, such as this one where expansion is
necessary but the entries in DISKS may not point to entities that can be
expanded.
Base the pool used for testing on file-type VDEVs instead of using zvols
within an underlying pool, to avoid issues that come up when pools are
backed by other pools.
Remove shell variables EX_1GB and EX_2GB used to recognize correct expansion,
and instead calculate the appropriate values based on the variables used to
control file or volume size, org_size and exp_size. This change is also
made in test 001 although that test is not enabled because it depends on
FMA.
Finally, enable zpool_expand_002_pos.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5757
George Melikov [Mon, 13 Feb 2017 20:02:22 +0000 (23:02 +0300)]
Disable racy snapshot_008_pos
Sometimes zfstests check freed space just after
`zfs destroy snapshot` and get wrong output, because the
space being freed asynchronously in the background.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Issue #5740
Issue #5784
Closes #5785
A likely cut/paste error caused the description to be applied to
zfs_arc_average_blocksize.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #5788
Authored by: John Wren Kennedy <john.kennedy@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7496
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/5dc1fd7
Closes #5781
OpenZFS 6642 - testrunner output can be displayed in the wrong order
6643 zfstest should enforce the required privileges before running.
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Jonathan Mackenzie <jonathan.mackenzie@delphix.com>
Reviewed by: Yuri Pankov <yuri.pankov@nexenta.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Reviewed by: John Kennedy <john.kennedy@delphix.com> Ported-by: Brian Behlendorf <behlendorf1@llnl.gov
OpenZFS-issue: https://www.illumos.org/issues/6642
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/412db4e
Closes #5777
Porting notes:
- The 6643 changes were dropped a different version of this script
is used to configure the environment under Linux.
Chunwei Chen [Sat, 11 Feb 2017 20:42:17 +0000 (12:42 -0800)]
Fix off by one in zpl_lookup
Doing the following command would return success with zfs creating an orphan
object.
touch $(for i in $(seq 256); do printf "n"; done)
The funny thing is that this will only work once for each directory, because
after upgraded to fzap, zfs_lookup would fail properly since it has additional
length check.
Signed-off-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5768
Tony Hutter [Fri, 10 Feb 2017 23:18:31 +0000 (15:18 -0800)]
Clear enclosure sysfs path from VDEV label when sysfs path isn't present
This clears vdev_enc_sysfs_path from the label if the VDEV's
/sys/class/block/<dev>/device/enclosure_device path isn't present.
This is important in the case where a disk that is labeled with
vdev_enc_sysfs_path is pulled out and put into another enclosure.
In that case, it's possible that the old sysfs path would be used to
turn on the fault LED for the disk's old slot postion, assuming the
new slot didn't have a LED sysfs entry.
Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Tony Hutter <hutter2@llnl.gov>
Closes #5524
Closes #5773
Matthew Ahrens [Wed, 13 Jul 2016 23:48:01 +0000 (16:48 -0700)]
OpenZFS 7104 - increase indirect block size
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan McDonald <danmcd@omniti.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7104
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/4b5c8e9
Closes #5679
Matthew Ahrens [Thu, 9 Feb 2017 18:19:12 +0000 (10:19 -0800)]
panic in bpobj_space(): null pointer dereference
This is a race condition in the deadlist code.
A thread executing an administrative command that uses
dsl_deadlist_space_range() holds the lock of the whole deadlist_t to
protect the access of all its entries that the deadlist contains in an
avl tree.
Sync threads trying to insert a new entry in the deadlist (through
dsl_deadlist_insert() -> dle_enqueue()) do not hold the deadlist lock at
that moment. If the dle_bpobj is the empty bpobj (our sentinel value),
we close and reopen it. Between these two operations, it is possible
for the dsl_deadlist_space_range() thread to dereference that bpobj
which is NULL during that window.
Threads should hold the a deadlist's dl_lock when they manipulate its
internal data so scenarios like the one above are avoided.
Reviewed-by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Dan Kimmel <dan.kimmel@delphix.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5762
The ziltest.sh script is a test case designed to verify the correct
functioning of the ZIL. For historical reasons it was never added
to the test suite and was always run independantly.
This change rectifies that. The existing ziltest.sh has been
translated in to `slog_015_pos.ksh` and added to the existing
slog test cases.
Reviewed-by: Don Brady <don.brady@intel.com> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5758
George Melikov [Wed, 8 Feb 2017 23:27:37 +0000 (02:27 +0300)]
Add `wait_freeing` helper function to ZTS
Sometimes the ZTS checks freed space just after `zfs destroy snapshot` and
gets an unexpected value because of space being freed asynchronously.
For cases like this add a `wait_freeing` function which blocks until the
pools `freeing` property drops to zero.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: George Melikov <mail@gmelikov.ru>
Closes #5740
The mount(8) command will helpfully try to resolve any device name
which is passed in. It does this by applying some simple heuristics
before passing it along to the registered mount helper.
Normally this fine. However, one of these heuristics is to prepend
the current working directory to the passed device name. If that
resulting directory name exists mount(8) will perform the mount(2)
system call and never invoke the helper utility.
Since the cwd for systemd when running as the system instance is
the root directory the default mount points created by zfs(8) can
cause a mount failure.
This change avoids the issue by explicitly setting the cwd to
a different path when performing the mount.
Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5719
Matthew Ahrens [Wed, 8 Feb 2017 17:27:48 +0000 (09:27 -0800)]
Allow c99 code to compile
Add the appropriate compiler flags to accept c99 code. This will help to
minimize differences with upstream, and aid porting changes. One change was
necessary in zvol.c because the DEFINE_IDA() macro does not work with the new
compiler flags.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Chunwei Chen <david.chen@osnexus.com> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Matthew Ahrens <mahrens@delphix.com>
Closes #5756
David Quigley [Tue, 7 Feb 2017 17:44:03 +0000 (10:44 -0700)]
Add missing module_param for zfs_per_txg_dirty_frees_percent
When the code was added this tunable was not exposed via module params. Also it
was not documented. This patch changes the type from a uint32 to a ulong as
done with other percentage tunables and also documents it in the
zfs-module-parameters man page.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: David Quigley <david.quigley@intel.com>
Closes #5750
In the current vdev label, the leaf count is always non-zero
but it doesn't hurt to check the count for future proofing.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5749
LOLi [Mon, 6 Feb 2017 18:08:10 +0000 (19:08 +0100)]
Fix ZFS Test Suite failures caused by ksh brace expansion feature
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: loli10K <ezomori.nozomu@gmail.com>
Closes #5669
Closes #5743
George Melikov [Sat, 4 Feb 2017 17:10:24 +0000 (20:10 +0300)]
OpenZFS 7247 - zfs receive of deduplicated stream fails
Authored by: Chris Williamson <chris.williamson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7247
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/2ad25b4
Closes #5689
Porting notes:
- tests/zfs-tests/tests/functional/cli_root/zfs_receive/zfs_receive_013_pos.ksh
renamed as zfs_receive_015_pos.ksh, zfs_receive_013_pos.ksh is now
used for OpenZFS test.
- libzfs_sendrecv.c: SMALLEST_POSSIBLE_MAX_DDT_MB is always used
for all 32-bit builds.
Disable sparse_001_pos / truncate_001_pos.ksh on 32-bit systems
Commit 539d33c seems to have significantly increased the run time
of the sparse_001_pos.ksh and truncate_001_pos.ksh test cases on
32-bit systems. This is likely due to dirty blocks from frees
being deferred to later txgs.
At the moment this is resulting in frequent failures on the
32-bit builders. Disable this test case until the issue can be
analyzed and resolved.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Issue #5727
Closes #5728
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Signed-off-by: Olaf Faaland <faaland1@llnl.gov>
Closes #5735
Don Brady [Thu, 2 Feb 2017 22:03:48 +0000 (15:03 -0700)]
Add nvlist payload stats for zdb -ll dump
When dumping the ZFS vdev label with 'zdb -ll', also dump
some nvlist stats to help analyze the current footprint.
Reviewed-by: Tony Hutter <hutter2@llnl.gov> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Don Brady <don.brady@intel.com>
Closes #5724
For generic_write_checks with 2 args, we can exit when it returns zero because
it means count is zero. However this is not the case for generic_write_checks
with 4 args, where zero means no error.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Haakan T Johansson <f96hajo@chalmers.se> Signed-off-by: Chunwei Chen <david.chen@osnexus.com>
Closes #5720
Closes #5726
This is effectively dead code for the Linux implementation which can
be removed to improve readability. We want to linter to check the
real production/debug build as much as possible.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Closes #5722
The atomic_sub_64() should use sbbl instead of adcl. In user
space these atomics are used for statistics tracking and aren't
critical which explain how this was overlooked. The kernel
space implementation of these atomics are layered on the
architecture specific implementations provided by the kernel.
Reviewed by: Stefan Ring <stefanrin@gmail.com> Reviewed-by: Gvozden Neskovic <neskovic@gmail.com> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5671
Closes #5717
Tim Crawford [Tue, 31 Jan 2017 22:47:32 +0000 (17:47 -0500)]
Match on word for excluding pools from tests
Running tests locally were failing on cleanup scripts due to having a
pool named "pool". Match on word so the cleanup logic will cleanup
"testpool.*" while ignoring "pool".
Reviewed-by: loli10K <ezomori.nozomu@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Tim Crawford <tcrawford@datto.com>
Closes #5703
George Melikov [Tue, 31 Jan 2017 22:41:23 +0000 (01:41 +0300)]
OpenZFS 7742 - zfs send wrong error message with invalid long opts
There are two cases:
1. if an invalid flag is passed, and
2. if a valid flag is not given a parameter.
In the case of (1), the flag is either short or long. For short flags,
optopt contains the character of the flag. For long, it contains zero,
and we can access the long flag using argv and optind.
In the case of (2), if the flag is short, optopt contains the character
of the flag. If the flag is long, the value in the 4th column of the
long_options table, for that flag, is returned.
We could case over all those values, or we could simply use argv and
optind again.
Note that in the case of something like `--resume`, which is also `-t`,
"t" will be returned if an argument is not provided; so the error
message will say `'t': argument not provided` or similar. This could be
fixed by making it so long and short options don't use the same
character flag, and then combining them in the switch/case statement,
but I didn't think the ugliness of the code would be worth the small
usability enhancement.
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7742
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6d69b40
Closes #5702
OpenZFS 7545 - zdb should disable reference tracking
Authored by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: Giuseppe Di Natale <dinatale2@llnl.gov>
Porting Notes: Moved reference_tracking_enable and
reference_history outside of ZFS_DEBUG.
Aron Xu [Tue, 31 Jan 2017 22:25:49 +0000 (06:25 +0800)]
contrib/dracut: fix syntax error in module-setup.sh
The dracut/02zfsexpandknowledge/module-setup.sh.in has a syntax error
which makes the script unusable by a POSIX compliant shell like Dash
on Debian based systems.
Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Aron Xu <happyaron.xu@gmail.com>
Closes #5712
Tim Chase [Tue, 31 Jan 2017 22:19:08 +0000 (16:19 -0600)]
Update deadman operation to better align with upstream OpenZFS
The deadman in ZoL didn't behave quite as it did in upstream
OpenZFS. In addition to the 2 purposes for which OpenZFS used the
zfs_deadman_synctime_ms parameter, ZoL also used it to determine how
frequently the deadman would fire once it has been triggered.
This patch adds the zfs_deadman_checktime_ms parameter to control how
frequently the subsequent checks are performed.
The deadman is now disabled for suspended pools.
As had been the case, unlike upstream OpenZFS, ZoL will not panic when
a hung IO is detected.
The module parameter documentation has been upated to include the new
parameter and to better describe the operation of the deadmen.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Tim Chase <tim@chase2k.com>
Closes #5695
George Melikov [Tue, 31 Jan 2017 18:48:45 +0000 (21:48 +0300)]
OpenZFS 7745 - print error if lzc_* is called before libzfs_core_init
The problem is that consumers of `libZFS_Core` that forget to call
`libzfs_core_init()` before calling any other function of the library
are having a hard time realizing their mistake. The library's internal
file descriptor is declared as global static, which is ok, but it is not
initialized explicitly; therefore, it defaults to 0, which is a valid
file descriptor. If `libzfs_core_init()`, which explicitly initializes
the correct fd, is skipped, the ioctl functions return errors that do
not have anything to do with `libZFS_Core`, where the problem is
actually located.
Even though assertions for that existed within `libZFS_Core` for debug
builds, they were never enabled because the `-DDEBUG` flag was missing
from the compiler flags.
This patch applies the following changes:
1. It adds `-DDEBUG` for debug builds of `libZFS_Core` and `libzfs`,
to enable their assertions on debug builds.
2. It corrects an assertion within `libzfs`, where a function had
been spelled incorrectly (`zpool_prop_unsupported()`) and nobody
knew because the `-DDEBUG` flag was missing, and the preprocessor
was taking that part of the code away.
3. The library's internal fd is initialized to `-1` and `VERIFY`
assertions have been placed to check that the fd is not equal to
`-1` before issuing any ioctl. It is important here to note, that
the `VERIFY` assertions exist in both debug and non-debug builds.
4. In `libzfs_core_fini` we make sure to never increment the
refcount of our fd below 0, and also reset the fd to `-1` when no
one refers to it. The reason for this, is for the rare case that
the consumer closes all references but then calls one of the
library's functions without using `libzfs_core_init()` first, and
in the mean time, a previous call to `open()` decided to reuse
our previous fd. This scenario would have passed our assertion in
non-debug builds.
5. Once the `ASSERTION` macros were enabled again, two tests from
the test suite were failing in `libzfs_sendrecv.c` at a
`ZIO_CHECKSUM_IS_ZERO` check within `dump_record()`. We now zero
the kernel filled checksums in all `dmu_replay_record`s that we
read in `cksummer()`, except the ones that are of type
`DRR_BEGIN`.
I considered making all assertions available for both debug and
non-debug builds, but I figured that it would not be appropriate if, for
example, an outside consumer of `libZFS_Core` suddenly triggers an
assertion failure because they happened to call `libzfs_core_fini()`,
even if previously the reference counter was `0`. Therefore, all the
reference counter related assertions are only enabled for debug builds,
and fd related assertions are enabled for debug and non-debug builds.
Porting notes:
- `ASSERT3S(g_refcount, >, 0);` added to `recv_impl` in
lib/libzfs_core/libzfs_core.c .
Authored by: Serapheim Dimitropoulos <serapheim@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7745
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/7e3139a
Closes #5698
George Melikov [Tue, 31 Jan 2017 18:24:23 +0000 (21:24 +0300)]
OpenZFS 7019 - zfsdev_ioctl skips secpolicy when FKIOCTL is set
Authored by: Alex Wilson <alex.wilson@joyent.com>
Reviewed by: Robert Mustacchi <rm@joyent.com>
Reviewed by: Richard Lowe <richlowe@richlowe.net>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7019
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/45b1747
Closes #5709
George Melikov [Tue, 31 Jan 2017 18:19:36 +0000 (21:19 +0300)]
OpenZFS 7136 - ESC_VDEV_REMOVE_AUX ought to always include vdev information
Authored by: Alan Somers <asomers@gmail.com>
7115 6922 generates ESC_ZFS_VDEV_REMOVE_AUX a bit too often
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Josef 'Jeff' Sipek <jeffpc@josefsipek.net>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7136
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/b72b6bb
Closes #5691
Porting notes:
- Functionally this patch behaves the same as the OpenZFS
version but it was adapted because because ZoL doesn't
have the same illumos sysevent_t infrastructure and functionality.
George Melikov [Tue, 31 Jan 2017 01:12:58 +0000 (04:12 +0300)]
OpenZFS 7490 - real checksum errors are silenced when zinject is on
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7490
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/6cedfc3
Closes #5693
George Melikov [Mon, 30 Jan 2017 23:33:46 +0000 (02:33 +0300)]
OpenZFS 6922 - Emit ESC_ZFS_VDEV_REMOVE_AUX after removing an aux device
Authored by: Alan Somers <asomers@gmail.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/6922
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/63364b0
Closes #5690
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
The refresh_config() calls into the kernel with ZFS_IOC_POOL_TRYIMPORT.
This ioctl returns the config of the pool in a buffer pre-allocated in
userland. The original estimate for the size is too conservative since
it doesn't account for the large size of vdev stats that are added to
the config before returning.
This fix simply increases the size of the buffer passed. This results in
a speed up of the zpool import process, and less spam in zfs_dbgmsg.
Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7541
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/a3c7690
Closes #5704
George Melikov [Mon, 30 Jan 2017 19:34:36 +0000 (22:34 +0300)]
OpenZFS 7502 - ztest should run zdb with -G (debug mode)
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Dan Kimmel <dan.kimmel@delphix.com>
Approved by: Gordon Ross <gordon.w.ross@gmail.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7502
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/c3c65d1
Closes #5677
George Melikov [Sat, 28 Jan 2017 20:16:43 +0000 (23:16 +0300)]
OpenZFS 7277 - zdb should be able to print zfs_dbgmsg's
Porting notes:
- 'zfs_dbgmsg_print()' reintroduced to userspace.
Authored by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Reviewed by: Igor Kozhukhov <ikozhukhov@gmail.com>
Approved by: Dan McDonald <danmcd@omniti.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Reviewed-by: Giuseppe Di Natale <dinatale2@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7277
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/29bdd2f
Closes #5684
Brian Behlendorf [Sat, 28 Jan 2017 20:13:34 +0000 (12:13 -0800)]
Fix suspend Godfather I/Os io_reexecute bits
After resuming a pool the godfather zio could have both the
ZIO_REEXECUTE_NOW and ZIO_REEXECUTE_SUSPEND bits set. This
can occur if some child zios set ZIO_REEXECUTE_NOW while
other set ZIO_REEXECUTE_SUSPEND. The godfather zio can
inherit both flags in zio_notify_parent().
The child zios which assigned the ZIO_REEXECUTE_SUSPEND flag
will be removed from the godfather's child list and added to
the spa->spa_suspend_zio_root child list. While child zios
with the ZIO_REEXECUTE_NOW bit set remain being monitored
by the godfather zio.
When the godfather zio executes zio_done() the presence of
the ZIO_REEXECUTE_SUSPEND bit results in all io_reexecute
being cleared. These child zios will then not be re-executed
and instead will be destroyed and lost.
The most straight forward way to address this situation is
to only clear the ZIO_REEXECUTE_SUSPEND bit and leave the
ZIO_REEXECUTE_NOW bit set.
Reviewed-by: George Melikov <mail@gmelikov.ru> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Signed-off-by: yuxiang <guo.yong33@zte.com.cn>
Brian Behlendorf [Sat, 28 Jan 2017 20:12:25 +0000 (12:12 -0800)]
Add -Wno-declaration-after-statement to KERNELCPPFLAGS
Disable the warnings regarding ISO C90 forbidding mixed
declarations and code. While this functionality was
introduced as part of C99 gcc does allow this in C90
mode as an extension.
Allowing this usage helps minimize the changes required
when porting patches from OpenZFS. The downside here is
that this functionality is specific to gcc.
Reviewed-by: George Melikov <mail@gmelikov.ru> Signed-off-by: Brian Behlendorf <behlendorf1@llnl.gov>
Closes #5686
George Melikov [Sat, 28 Jan 2017 20:11:09 +0000 (23:11 +0300)]
OpenZFS 7580 - ztest failure in dbuf_read_impl
Authored by: George Wilson <george.wilson@delphix.com>
Reviewed by: Pavel Zakharov <pavel.zakharov@delphix.com>
Reviewed by: Steve Gonczi <steve.gonczi@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7580
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/3105d95
Closes #5678
George Melikov [Fri, 27 Jan 2017 19:47:54 +0000 (22:47 +0300)]
OpenZFS 7340 - receive manual origin should override automatic origin
Authored by: Paul Dagnelie <pcd@delphix.com>
Reviewed by: George Wilson <george.wilson@delphix.com>
Reviewed by: Matthew Ahrens <mahrens@delphix.com>
Approved by: Robert Mustacchi <rm@joyent.com> Reviewed-by: Brian Behlendorf <behlendorf1@llnl.gov> Ported-by: George Melikov <mail@gmelikov.ru>
OpenZFS-issue: https://www.illumos.org/issues/7340
OpenZFS-commit: https://github.com/openzfs/openzfs/commit/ed4e7a6
Closes #5681