Issue #6629: Fix a data corruption issue in the new `io` package, which could
occur when writing to a BufferedRandom object (e.g. a file opened in "rb+" or
"wb+" mode) after having buffered a certain amount of data for reading. This
bug was not present in the pure Python implementation.
Issue #6620: Slightly safer code for _grouping_intervals in the locale
module. Fixes a 'possible use before assignment' warning from pylint.
Thanks Vincent Legoll.
........
Adding tests derived from the Jython project. These are primarily tests of
'single' statements with partial sentences (so they test things like "try:" in
interactive mode). Others tests hit areas that previously failed in Jython. A
couple still fail in Jython, mainly due to the difficulty of parsing partial
sentences (but should be fixed by Jython 2.6).
........
Issue #6595: Allow Decimal constructor to accept non-European decimal
digits, as recommended by the specification. (Backport of r74279 from
py3k.)
........
1. Clean workspace more thoughly before build.
2. Add url of branch we are building to 'results' webpage.
(url is now available in $repo_path, could be added to failure email.)
3. Adjust permissions to improve upload reliability.
........
use bools
........
r74192 | georg.brandl | 2009-07-24 12:28:38 -0400 (Fri, 24 Jul 2009) | 1 line
Fix arg types of et#.
........
r74193 | georg.brandl | 2009-07-24 12:46:38 -0400 (Fri, 24 Jul 2009) | 1 line
Dont put "void" in signature for nullary functions.
........
r74200 | georg.brandl | 2009-07-25 09:02:15 -0400 (Sat, 25 Jul 2009) | 1 line
#6571: add index entries for more operators.
........
r74252 | georg.brandl | 2009-07-29 12:06:31 -0400 (Wed, 29 Jul 2009) | 1 line
#6593: fix link targets.
........
r74253 | georg.brandl | 2009-07-29 12:09:17 -0400 (Wed, 29 Jul 2009) | 1 line
#6591: add reference to ioctl in fcntl module for platforms other than Windows.
........
r74258 | georg.brandl | 2009-07-29 12:57:05 -0400 (Wed, 29 Jul 2009) | 1 line
Add a link to readline, and mention IPython and bpython.
........
r74259 | georg.brandl | 2009-07-29 13:07:21 -0400 (Wed, 29 Jul 2009) | 1 line
Fix some markup and small factual glitches found by M. Markert.
........
r74260 | georg.brandl | 2009-07-29 13:15:20 -0400 (Wed, 29 Jul 2009) | 1 line
Fix a few markup glitches.
........
r74261 | georg.brandl | 2009-07-29 13:50:25 -0400 (Wed, 29 Jul 2009) | 1 line
Rewrite the section about classes a bit; mostly tidbits, and a larger update to the section about "private" variables to reflect the Pythonic consensus better.
........
Issue #6561: '\d' regular expression should not match characters of
category [No]; only those of category [Nd]. (Backport of r74237
from py3k.)
........
#6548: dont suggest existence of real and imag functions in cmath.
........
r74230 | mark.dickinson | 2009-07-28 17:12:40 +0100 (Tue, 28 Jul 2009) | 4 lines
Issue #6458: Reorganize cmath documentation into sections (similar to
the way that the math documentation is organized); clarify section on
conversions to and from polar coordinates.
........
Fix open_urlresource() to pass its arguments to open() when the resource is cached.
This fixes the failure of test_normalization on the Windows buildbots,
where the Normalization.txt file was read as a MBCS text file, instead
as a UTF-8 one.
PyCode_NewEmpty:
Most uses of PyCode_New found by http://www.google.com/codesearch?q=PyCode_New
are trying to build an empty code object, usually to put it in a dummy frame
object. This patch adds a PyCode_NewEmpty wrapper which lets the user specify
just the filename, function name, and first line number, instead of also
requiring lots of code internals.
........
r72488 | jeffrey.yasskin | 2009-05-08 18:23:21 -0400 (Fri, 08 May 2009) | 13 lines
Issue 5954, PyFrame_GetLineNumber:
Most uses of PyCode_Addr2Line
(http://www.google.com/codesearch?q=PyCode_Addr2Line) are just trying to get
the line number of a specified frame, but there's no way to do that directly.
Forcing people to go through the code object makes them know more about the
guts of the interpreter than they should need.
The remaining uses of PyCode_Addr2Line seem to be getting the line from a
traceback (for example,
http://www.google.com/codesearch/p?hl=en#u_9_nDrchrw/pygame-1.7.1release/src/base.c&q=PyCode_Addr2Line),
which is replaced by the tb_lineno field. So we may be able to deprecate
PyCode_Addr2Line entirely for external use.
........
r72879 | jeffrey.yasskin | 2009-05-23 19:23:01 -0400 (Sat, 23 May 2009) | 14 lines
Issue #6042:
lnotab-based tracing is very complicated and isn't documented very well. There
were at least 3 comment blocks purporting to document co_lnotab, and none did a
very good job. This patch unifies them into Objects/lnotab_notes.txt which
tries to completely capture the current state of affairs.
I also discovered that we've attached 2 layers of patches to the basic tracing
scheme. The first layer avoids jumping to instructions that don't start a line,
to avoid problems in if statements and while loops. The second layer
discovered that jumps backward do need to trace at instructions that don't
start a line, so it added extra lnotab entries for 'while' and 'for' loops, and
added a special case for backward jumps within the same line. I replaced these
patches by just treating forward and backward jumps differently.
........
Grow the allocated buffer in PyUnicode_EncodeUTF7 to avoid buffer overrun.
Without this change, test_unicode.UnicodeTest.test_codecs_utf7 crashes in
debug mode. What happens is the unicode string u'\U000abcde' with a length
of 1 encodes to the string '+2m/c3g-' of length 8. Since only 5 bytes is
reserved in the buffer, a buffer overrun occurs.
........
R. David Murray [Mon, 20 Jul 2009 17:34:54 +0000 (17:34 +0000)]
Remove apparently unneeded and un-cleaned-up munging of sys.path from
test_re. Tests pass on my machine without it, and I can't see
any obvious place in the tests that would need it.
Merged revisions 73771,73811,73840,73842,73848-73849,73861,73957-73960,73964-73969,73972-73974,73977,73981,73984,74065,74113 via svnmerge from
svn+ssh://pythondev@svn.python.org/sandbox/trunk/2to3/lib2to3
force the imports fixer to be run after the import one #6400
........
r73811 | benjamin.peterson | 2009-07-03 09:03:14 -0500 (Fri, 03 Jul 2009) | 1 line
check for sep, not pathsep when looking for a subpackage #6408
........
r73840 | benjamin.peterson | 2009-07-04 09:52:28 -0500 (Sat, 04 Jul 2009) | 1 line
remove usage of get_prefix()
........
r73966 | benjamin.peterson | 2009-07-11 17:33:35 -0500 (Sat, 11 Jul 2009) | 1 line
revert unintended change in 73965
........
r73967 | benjamin.peterson | 2009-07-11 17:34:44 -0500 (Sat, 11 Jul 2009) | 1 line
avoid expensive checks and assume the node did change
........
r73968 | benjamin.peterson | 2009-07-11 20:46:46 -0500 (Sat, 11 Jul 2009) | 1 line
use a regular dict for the heads to avoid adding lists in the loop
........
r73969 | benjamin.peterson | 2009-07-11 20:50:43 -0500 (Sat, 11 Jul 2009) | 1 line
prefix headnode functions with '_'
........
r73972 | benjamin.peterson | 2009-07-11 21:25:45 -0500 (Sat, 11 Jul 2009) | 1 line
try to make the head node dict as sparse as possible
........
r73973 | benjamin.peterson | 2009-07-11 21:59:49 -0500 (Sat, 11 Jul 2009) | 1 line
a better idea; add an option to *not* print diffs
........
r73974 | benjamin.peterson | 2009-07-11 22:00:29 -0500 (Sat, 11 Jul 2009) | 1 line
add space
........
r73977 | benjamin.peterson | 2009-07-12 10:16:07 -0500 (Sun, 12 Jul 2009) | 1 line
detect when "from __future__ import print_function" is given
Deprecate the 'print_function' option and the -p flag
........
r73984 | benjamin.peterson | 2009-07-12 16:16:37 -0500 (Sun, 12 Jul 2009) | 1 line
add tests for Call; thanks Joe Amenta
........
r74065 | benjamin.peterson | 2009-07-17 12:52:49 -0500 (Fri, 17 Jul 2009) | 1 line
pathname2url and url2pathname are in urllib.request not urllib.parse #6496
........
r74113 | benjamin.peterson | 2009-07-20 08:56:57 -0500 (Mon, 20 Jul 2009) | 1 line
fix deprecation warnings in tests
........
................
Implement the PEP 302 protocol for get_filename() as
importlib.abc.ExecutionLoader. PyLoader now inherits from this ABC instead of
InspectLoader directly. Both PyLoader and PyPycLoader provide concrete
implementations of get_filename in terms of source_path and bytecode_path.
Importlib's documentation said that importlib.abc.PyLoader inherited from
importlib.abc.ResourceLoader, when in fact it did not. Fixed the ABC to inherit
as documented.
This doesn't introduce an backwards-incompatiblity as the code in PyLoader
already required the single method ResourceLoader defined as an abstract
method.
Some tests in importlib.test.source.test_abc_loader were testing what happens
when a loader is given missing or bad code object bytecode. Unfortunately an
exception related to source paths was masking what the proper exception to test
should be. Making the test explicitly set the environment fixed the test.
porting revision 74098 from trunk:
http://bugs.python.org/issue6499
zlib/gzip may not be present for all builds. Make xmlrpclib gracefully not supporg gzip encoding in this case
projects / python / log