[AVX-512] Split X86ISD::VFPROUND and X86ISD::VFPEXT into separate opcodes for each type constraint.
This revealed that scalar intrinsics could create nodes with a rounding mode of FROUND_CUR_DIRECTION, but the patterns didn't check for it. It just worked because isel doesn't check operand count and we had a pattern without the rounding mode argument at all.
[AVX-512] Use different ISD opcodes for some of the scalar intrinsic lowering. Isel is not very robust against using the same ISD opcode with different number of operands so its better to separate.
Tom Stellard [Fri, 23 Sep 2016 00:42:56 +0000 (00:42 +0000)]
Triple: Add opencl environment type
Summary:
For AMDGPU, we have been using the operating system component of the triple
for specifying the low-level runtime that is being used. The rationale for
this is that the host operating system (e.g. Linux) is irrelevant for GPU code,
since its execution enviroment will be mostly controled by the low-level runtime
being used to execute the code.
In most cases, higher level languages have their own runtime which is
implemented on top of the low-level runtime. The kernel ABIs of each
language mostly depend on the low-level runtime, but there may be some
slight differences between languages. OpenCL for example, may append
additional arguments to the kernel in order to pass values like global
offsets or buffers for printf. OpenMP, HCC, or other languages may want
to add their own values which differ from OpenCL.
The reason for adding a new opencl environment type is to make it possible for the backend
to distinguish between the ABIs of the higher-level languages and handle them correctly.
It seems cleaner to use the enviroment component for this rather than creating a new
OS type for every combination of low-level runtime / high-level language.
[AArch64][RegisterBankInfo] Switch to TableGen'ed like PartialMapping.
Statically instanciate the most common PartialMappings. This should
be closer to what the code would look like when TableGen support is
added for GlobalISel. As a side effect, this should improve compile
time.
[RegisterBankInfo] Check that the mapping covers the interesting bits.
In the verify method of the ValueMapping class we used to check that the
mapping exactly matches the bits of the input value. This is problematic
for statically allocated mappings because we would need a different
mapping for each different size of the value that maps on one
instruction. For instance, with such scheme, we would need a different
mapping for a value of size 1, 5, 23 whereas they all end up on a 32-bit
wide instruction.
Therefore, change the verifier to check that the meaningful bits are
covered by the mapping instead of matching them.
[RegisterBankInfo] Use array instead of SmallVector for BreakDown.
This is another step toward TableGen'ed like structures. The BreakDown of
the mapping of the value will be statically computed by TableGen, thus
we only have to point to the right entry in the table instead of
dynamically allocate the mapping for each instruction.
We still support the dynamic allocation through a factory of
PartialMapping to ease the bring-up of the targets while the TableGen
backend is not available.
[InstCombine] fold X urem C -> X < C ? X : X - C when C is big (PR28672)
We already have the udiv variant of this transform, so I think this is ok for
InstCombine too even though there is an increase in IR instructions. As the
tests and TODO comments show, the transform can lead to follow-on combines.
This should fix: https://llvm.org/bugs/show_bug.cgi?id=28672
[utils] Teach the code coverage prep script about --restrict
Add two options to the code coverage artifact prep script:
* --use-existing-profdata: Use an existing indexed profile instead of
merging the same profiles again.
* --restrict: Restrict the coverage reporting to the given list of
source directories.
With this in place, we can teach the coverage bot how to prepare
separate reports for each of the llvm tools.
Currently all nodes get added to the NextSU list when they are released,
so any candidate must be in that list, making the heuristic ineffective.
Remove it for now, we can add it back later in a working fashion if
necessary.
[Hexagon] Remove USR_OVF from CtrRegs register class
USR_OVF is a subregister of USR, which is a member of CtrRegs. Having both
a register and its proper subregister in the same register class has bad
consequences for lane mask calculation: based solely on the lane mask info,
USR_OVF would not appear to be a subregister of USR.
[PowerPC] Sign extend sub-word values for atomic comparisons
Atomic comparison instructions use the sub-word load instruction on
Power8 and up but the value is not sign extended prior to the signed word
compare instruction. This patch adds that sign extension.
Speculative fix for build failures due to consumeInteger.
A recent patch added support for consumeInteger() and made
getAsInteger delegate to this function. A few buildbots are
failing as a result with an assertion failure. On a hunch,
I tested what happens if I call getAsInteger() on an empty
string, and sure enough it crashes the same way that the
buildbots are crashing.
I confirmed that getAsInteger() on an empty string did not
crash before my patch, so I suspect this to be the cause.
Sebastian Pop [Thu, 22 Sep 2016 15:33:51 +0000 (15:33 +0000)]
GVN-hoist: fix store past load dependence analysis (PR30216)
To hoist stores past loads, we used to search for potential
conflicting loads on the hoisting path by following a MemorySSA
def-def link from the store to be hoisted to the previous
defining memory access, and from there we followed the def-use
chains to all the uses that occur on the hoisting path. The
problem is that the def-def link may point to a store that does
not alias with the store to be hoisted, and so the loads that are
walked may not alias with the store to be hoisted, and even as in
the testcase of PR30216, the loads that may alias with the store
to be hoisted are not visited.
The current patch visits all loads on the path from the store to
be hoisted to the hoisting position and uses the alias analysis
to ask whether the store may alias the load. I was not able to
use the MemorySSA functionality to ask for whether load and
store are clobbered: I'm not sure which function to call, so I
used a call to AA->isNoAlias().
Store past store is still working as before using a MemorySSA
query: I added an extra test to pr30216.ll to make sure store
past store does not regress.
StringRef::getInteger() exists and treats the entire string as
an integer of the specified radix, failing if any invalid characters
are encountered or the number overflows.
Sometimes you might have something like "123456foo" and you want
to get the number 123456 and leave the string "foo" remaining.
This is similar to what would be possible by using the standard
runtime library functions strtoul et al and specifying an end
pointer.
This patch adds consumeInteger(), which does exactly that. It
consumes as much as possible until an invalid character is found,
and modifies the StringRef in place so that upon return only
the portion of the StringRef after the number remains.
Sebastian Pop [Thu, 22 Sep 2016 14:45:40 +0000 (14:45 +0000)]
GVN-hoist: only hoist relevant scalar instructions
Without this patch, GVN-hoist would think that a branch instruction is a scalar instruction
and would try to value number it. The patch filters out all such kind of irrelevant instructions.
A bit frustrating is that there is no easy way to discard all those very infrequent instructions,
a bit like isa<TerminatorInst> that stands for a large family of instructions. I'm thinking that
checking for those very infrequent other instructions would cost us more in compilation time
than just letting those instructions getting numbered, so I'm still thinking that a simpler check:
if (isa<TerminatorInst>(I))
return false;
is better than listing all the other less frequent instructions.
Keith Walker [Thu, 22 Sep 2016 14:13:25 +0000 (14:13 +0000)]
Reapplying r281895 (and follow-up r281964) after fixing pr30468.
The additional fix is:
When adding debug information to a lowered phi node in mem2reg
check that we have a valid insertion point after the phi for adding
the debug information.
This change addresses the issue in pr30468 where a lowered phi was
added before a catchswitch and no debug information should be added
after the phi in this case.
[PowerPC] Remove LE patterns matching generic stores/loads to VSX permuting ops
This patch corresponds to:
https://reviews.llvm.org/D21409
The LXVD2X, LXVW4X, STXVD2X and STXVW4X instructions permute the two doublewords
in the vector register when in little-endian mode. Custom code ensures that the
necessary swaps are inserted for these. This patch simply removes the possibilty
that a load/store node will match one of these instructions in the SDAG as that
would not insert the necessary swaps.
[Power9] Add exploitation of non-permuting memory ops
This patch corresponds to review:
https://reviews.llvm.org/D19825
The new lxvx/stxvx instructions do not require the swaps to line the elements
up correctly. In order to select them over the lxvd2x/lxvw4x instructions which
require swaps, the patterns for the old instruction have a predicate that
ensures they won't be selected on Power9 and newer CPUs.
[AVX-512] Add support for commuting VPTERNLOG instructions.
VPTERNLOG is a ternary instruction with an immediate specifying the logical operation to perform. For each bit position in the 3 source vectors the bit from each source is concatenated together and the resulting 3-bit value is used to select a bit in the immediate. This bit value is written to the result vector.
We can commute this by swapping operands and modifying the immediate. To modify the immediate we need to swap two pairs of bits. The pairs correspond to the locations in the immediate where the commuted operands bits have opposite values and the uncommuted operand has the same value. Bits 0 and 7 will never be swapped since the relevant bits from all sources are the same value.
This refactors and reuses parts of the FMA3 commuting code which is also a three operand instruction.
[RegisterBankInfo] Move to statically allocated RegisterBank.
This commit is basically the first step toward what will
RegisterBankInfo look when it gets TableGen'ed.
It introduces a XXXGenRegisterBankInfo.def file that is what TableGen
will issue at some point. Moreover, the RegBanks field in
RegisterBankInfo changed to reflect the static (compile time) aspect of
the information.
[RegisterBankInfo] Take advantage of the extra argument of SmallVector::resize.
When initializing an instance of OperandsMapper, instead of using
SmallVector::resize followed by std::fill, use the function that
directly does that in SmallVector.
Kevin Enderby [Wed, 21 Sep 2016 20:03:09 +0000 (20:03 +0000)]
Next set of additional error checks for invalid Mach-O files for bad LC_UUID
load commands. Added a missing check and made the check for more than
one like other other “more than one” checks. And of course added test cases.
Chad Rosier [Wed, 21 Sep 2016 19:16:47 +0000 (19:16 +0000)]
[LoopInterchange] Track all dependencies, not just anti dependencies.
Currently, we give up on loop interchange if we encounter a flow dependency
anywhere in the loop list. Worse yet, we don't even track output dependencies.
This patch updates the dependency matrix computation to track flow and output
dependencies in the same way we track anti dependencies.
This improves an internal workload by 2.2x.
Note the loop interchange pass is off by default and it can be enabled with
'-mllvm -enable-loopinterchange'
Teresa Johnson [Wed, 21 Sep 2016 19:12:05 +0000 (19:12 +0000)]
[ThinLTO] Emit files for distributed builds for all modules
With the new LTO API in r278338, we stopped emitting the individual
index files and imports files for some modules in the distributed backend
case (thinlto-index-only plugin option).
Specifically, this is when the linker decides not to include a module in the
link, because it was in an archive library and did not have a strong
reference to it. Not creating the expected output files makes the
distributed build system implementation more difficult, in terms of
checking for the expected outputs of the thin link, and scheduling the
backend jobs. To address this, the gold-plugin will write dummy empty
.thinlto.bc and .imports files for modules not included in the link
(which LTO never sees).
Augmented a gold v1.12+ test, since that version of gold has the handling
for notifying on modules not being included in the link.
Matthew Simpson [Wed, 21 Sep 2016 16:50:24 +0000 (16:50 +0000)]
[LV] Don't emit unused scalars for uniform instructions
If we identify an instruction as uniform after vectorization, we know that we
should only use the value corresponding to the first vector lane of each unroll
iteration. However, when scalarizing such instructions, we still produce values
for the other vector lanes. This patch prevents us from generating the unused
scalars.
Tim Northover [Wed, 21 Sep 2016 12:57:45 +0000 (12:57 +0000)]
GlobalISel: produce correct code for signext/zeroext ABI flags.
We still don't really have an equivalent of "AssertXExt" in DAG, so we don't
exploit the guarantees on the receiving side yet, but this should produce
conservatively correct code on iOS ABIs.
Tim Northover [Wed, 21 Sep 2016 12:57:35 +0000 (12:57 +0000)]
GlobalISel: pass Function to lowerFormalArguments directly (NFC).
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
The postRA scheduler performs alias analysis to determine if stores and loads
can moved past each other. When a function has more arguments than argument
registers for the calling convention used, excess arguments are spilled onto the
stack. LLVM by default assumes that argument slots are immutable, unless the
function contains a tail call. Without the knowledge of that a function contains
a tail call site, stores and loads to fixed stack slots may be re-ordered
causing the out-going arguments to clobber the incoming arguments before the
incoming arguments are supposed to be dead.
Lei Liu [Wed, 21 Sep 2016 07:41:41 +0000 (07:41 +0000)]
AArch64: Set shift bit of TLSLE HI12 add instruction
Summary: AArch64 LLVM assembler emits add instruction without shift bit to calculate the higher 12-bit address of TLS variables in local exec model. This generates wrong code sequence to access TLS variables with thread offset larger than 0x1000.
[AVX-512] Split the 3 different usages of the X86ISD::FSETCC opcode into 3 different opcodes.
It turns out isel is really not robust against having different type profiles for the same opcode. It turns out that if you put an illegal rounding mode(i.e. not CUR_DIRECTION or NO_EXC) on a comiss intrinsic we would generate the FSETCC form with the rounding mode added, but then pattern match to an instruction with ROUND_CUR_DIRECTION.
We can probably get away with just one FSETCCM opcode that always contains the rounding mode and explicitly put ROUND_CUR_DIRECTION in the pattern, but I'll leave that for future work.
With this change the clang tests for the comiss intrinsics that used an incorrect rounding mode of 3 properly fail isel instead of silently doing the wrong thing. Those clang tests will be fixed in a follow up commit and I also plan to add rounding mode checking to clang.
[AVX-512] Don't add an additional rounding mode operand to the avx512 vcvtps2ph intrinsic lowering.
There was no way to control its value so it was always FROUND_CURRENT making it unnecessary. The true rounding mode is encoded in the immediate operand of the instruction.
This also removes the pattern from the rb form of the instructions since there is no way to specify the FROUND_NO_EXC rounding mode it required.
[AVX-512] Simplify handling of INTR_TYPE_1OP_MASK_RM to remove support for the second opcode since its never used. This makes it consistent with INTR_TYPE_2OP_MASK_RM and INTR_TYPE_3OP_MASK_RM.
And even if it was used we were passing the same operands to both so it wouldn't make sense to have two opcodes.
[AVX-512] Don't lower avx512 vcvtps2ph/vcvtph2ps nodes to ISD::FP16_TO_FP/ISD::FP_TO_FP16 with an extra x86 specific rounding mode operand. We should use a target specific ISD opcode.
Jacques Pienaar [Wed, 21 Sep 2016 01:57:57 +0000 (01:57 +0000)]
[NVPTX] Check if callsite is defined when computing argument allignment
Summary: In getArgumentAlignment check if the ImmutableCallSite pointer CS is non-null before dereferencing. If CS is 0x0 fall back to the ABI type alignment else compute the alignment as before.
Teresa Johnson [Tue, 20 Sep 2016 23:07:17 +0000 (23:07 +0000)]
[ThinLTO] Always emit a summary when compiling in ThinLTO mode
Summary:
Emit an empty summary section, instead of no summary section, when
there are no global variables in the index. This ensures that LTO
will treat these files as ThinLTO inputs, instead of as regular
LTO inputs.
In addition to not being what the user likely intended when
compiling with -flto=thin, the current behavior is problematic for
distributed build systems that expect to get ThinLTO index and imports
files back for each input compiled with -flto=thin. Combining into
a single regular LTO module also reduces the backend parallelism.
And in the case where the index was suppressed due to uses in
inline assembly, combining into a single LTO module could provoke
renaming of duplicates that we were trying to prevent by suppressing
the index.
This change required a couple of fixes to handle the empty summary
section.
Eric Christopher [Tue, 20 Sep 2016 22:03:28 +0000 (22:03 +0000)]
Revert "Remove extra argument used once on
TargetMachine::getNameWithPrefix and inline the result into the singular
caller." and "Remove more guts of TargetMachine::getNameWithPrefix and
migrate one check to the TLOF mach-o version." temporarily until I can
get the whole call migrated out of the TargetMachine as we could hit
places where TLOF isn't valid.
Anna Thomas [Tue, 20 Sep 2016 21:36:02 +0000 (21:36 +0000)]
[RS4GC] Refactor code for Rematerializing in presence of phi. NFC
Summary:
This is an NFC refactoring change as a precursor to the actual fix for rematerializing in
presence of phi.
https://reviews.llvm.org/D24399
Pasted from review:
findRematerializableChainToBasePointer changed to return the root of the
chain. instead of true or false.
move the PHI matching logic into the caller by inspecting the root return value.
This includes an assertion that the alternate root is in the liveset for the
call.
projects / llvm / log