tests: workaround old gawk versions that do not provide @include support
Some of our tests use GNU awk @include extension, but not all currently
used versions of GNU awk support it. Skip these tests if gawk does not
provide @include support.
* tests/init.sh (check_gawk): New function.
(match_awk): Use it.
Dmitry V. Levin [Tue, 31 Mar 2015 19:45:08 +0000 (19:45 +0000)]
umovestr: read chunks of memory up to pagesize at a time
* defs.h (get_pagesize): New prototype.
* mem.c (get_pagesize) Make global.
* util.c (PAGMASK): Remove.
(vm_read_mem): New process_vm_readv proxy function.
(umoven, umovestr): Use it.
(umovestr): Read chunks up to pagesize at a time.
Dmitry V. Levin [Mon, 30 Mar 2015 15:21:55 +0000 (15:21 +0000)]
When process_vm_readv fails with EPERM, try PTRACE_PEEKDATA
process_vm_readv() and ptrace(PTRACE_PEEKDATA) have inconsistent access
control rules wrt traced processes: process_vm_readv() is more likely to
fail with EPERM than ptrace(PTRACE_PEEKDATA) when tracing a process that
has execve'd a privileged executable.
* util.c (umoven, umovestr): If process_vm_readv returned EPERM,
fall back to ptrace(PTRACE_PEEKDATA).
Reported-by: Andrew Guertin <lists@dolphinling.net>
Dmitry V. Levin [Fri, 27 Mar 2015 23:28:15 +0000 (23:28 +0000)]
signal.c: move siginfo_t parsers to a separate file
* printsiginfo.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* defs.h (printsiginfo): Change second argument's type from int to bool.
* signal.c: Stop defining siginfo_t related constants.
Move inclusion of xlat/sig*_codes.h files to printsiginfo.c
(printsigsource, printsigval, printsiginfo_at): Move to printsiginfo.c.
(printsiginfo): Change second argument's type from int to bool,
split, and move to printsiginfo.c.
Denys Vlasenko [Wed, 25 Mar 2015 13:16:08 +0000 (14:16 +0100)]
sparc: delete personality 1
Personality 1 for sparc and sparc64 appears to be an old attempt
to support stracing Solaris binaries.
It stalled after the only syscall, solaris_open, was covered:
all other solaris_foo's are printargs.
This change deletes personality 1. Now sparc is an one-personality
arch, and sparc64 is a two-personality one.
For clarity, pure renaming of personality 2 files to personality 1 for sparc64
is performed in the next commit - this prevents a state where syscallent1.h
seems to indergo a lot of changes, where in fact in is deleted, and then
replaced by syscallent2.h
Fix this by updating ARM syscall sanity check.
In particular, get_scno() should not set TCB_INSYSCALL flag because
other code assumes that s_ent is properly initialized when this flag
is set.
* linux/arm/get_scno.c: Check syscall number after fetching.
Do not apply the check to SCNO_IN_RANGE syscalls.
Do not set TCB_INSYSCALL flag.
Extend diagnostics and move it to debug level.
Dmitry V. Levin [Sun, 22 Mar 2015 22:13:55 +0000 (22:13 +0000)]
syscall.c: split arch specific code into separate arch files
Split code that use arch-specific registers to separate arch files.
* syscall.c: Move definitions of variables containing fetched registers
to linux/*/arch_regs.c files.
[HAVE_GETRVAL2] (getrval2): Move arch-specific code
to linux/*/arch_getrval2.c, include "arch_getrval2.c".
(print_pc): Move arch-specific code to linux/*/print_pc.c files,
include "print_pc.c".
[X86_64] (x86_64_getregs_old): Rename to getregs_old, move to
linux/x86_64/getregs_old.c, include "getregs_old.c".
[POWERPC] (powerpc_getregs_old): Rename to getregs_old, move to
linux/powerpc/getregs_old.c, include "getregs_old.c".
(get_regs) [X86_64, POWERPC]: Update callers.
(get_scno): Move arch-specific code to linux/*/get_scno.c,
include "get_scno.c".
(get_syscall_args): Move arch-specific code
to linux/*/get_syscall_args.c, include "get_syscall_args.c".
(get_error): Move arch-specific code to linux/*/get_error.c,
include "get_error.c".
(get_syscall_result): Move arch-specific code
to linux/*/get_syscall_result.c, include "get_syscall_result.c".
* Makefile.am (EXTRA_DIST): Add new linux/*/*.c files.
Dmitry V. Levin [Mon, 23 Mar 2015 18:48:32 +0000 (18:48 +0000)]
Move get_regs error check from trace_syscall_entering to get_scno
Starting with commit v4.10-25-g8497b62, get_scno() can be called outside
trace_syscall_entering(), so move the get_regs_error check from
trace_syscall_entering() to get_scno().
Denys Vlasenko [Sat, 21 Mar 2015 16:51:52 +0000 (17:51 +0100)]
Show the syscall name in "resuming interrupted call" message
When signal is received, or if we have attached to a process,
current syscall (if process is in one) gets restarted.
Some syscalls are restarted via "restart_syscall()" mechanism.
On such sycalls, we don't show _which_ syscall gets restarted.
IOW: users want to see "resuming interrupted nanosleep"
instead of "resuming interrupted call" when they attach to "sleep 999".
Kernel does expose this information. The only thing we need is
to fetch syscall# on attach, and save it.
This patch does this. It adds tcp->s_prev_ent, which is
a pointer to struct_sysent of the previous syscall of this tracee.
It can be NULL.
sys_restart_syscall() is made to use it when the message is generated.
To similarly handle restart_syscall() *after signals*, not just
on attach, on each syscall exit patch saves exited syscall's data
in the same member (tcp->s_prev_ent).
Dmitry V. Levin [Thu, 19 Mar 2015 22:58:22 +0000 (22:58 +0000)]
sparc, sparc64: fix decoding of mmap2
* linux/sparc/syscallent.h (mmap2): Decode with sys_mmap_4koff,
not sys_mmap.
* linux/sparc64/syscallent2.h (mmap2): Decode with sys_mmap_pgoff,
not sys_mmap.
Dmitry V. Levin [Wed, 18 Mar 2015 16:32:04 +0000 (16:32 +0000)]
aarch64, arm: decode extra padded compat struct statfs64
According to arch/arm/kernel/sys_oabi-compat.c,
struct statfs64 has extra padding with EABI.
* statfs.c [AARCH64 || defined ARM] (COMPAT_STATFS64_PADDED_SIZE):
Define.
(do_statfs64_fstatfs64): New function, factored out from sys_statfs64.
[COMPAT_STATFS64_PADDED_SIZE]: Check it in addition to
sizeof(struct compat_statfs64).
(sys_statfs64, sys_fstatfs64): Use do_statfs64_fstatfs64.
Dmitry V. Levin [Mon, 16 Mar 2015 18:10:21 +0000 (18:10 +0000)]
tests/uid*: use fchown* instead of chown*
Newer architectures have no chown syscall, so use fchown* syscalls
for testing printuid.
* tests/uid.test: Use fchown instead of chown.
* tests/uid.c: Test __NR_fchown instead of __NR_chown.
(main): Use __NR_fchown instead of __NR_chown.
* tests/uid32.c: Test __NR_fchown32 instead of __NR_chown32.
(main): Use __NR_fchown32 instead of __NR_chown32.
* tests/uid16.c: Test __NR_fchown and __NR_fchown32 instead
of __NR_chown and __NR_chown32.
(main): Use __NR_fchown instead of __NR_chown.
* tests/uid.awk: Update regexp.
Dmitry V. Levin [Thu, 12 Mar 2015 16:59:01 +0000 (16:59 +0000)]
Fix stat64 st_[acm]time decoding for personalities with 32-bit time_t
STRUCT_STAT.st_[acm]time are declared as unsigned int for some
personalities, while time_t is signed.
* printstat.h (DO_PRINTSTAT): If st_[acm]time have the same size as int,
explicitly cast them to int.
* tests/stat64-v.test: Test that negative time_t is decoded properly.
Dmitry V. Levin [Wed, 11 Mar 2015 14:57:57 +0000 (14:57 +0000)]
semctl: fix indirect syscall decoding
On architectures where the semctl call is implemented by the ipc syscall
the 4th argument is passed by reference.
* ipc.c (sys_semctl): Handle the indirect ipc subcall case.
* tests/ipc_sem.c (main): Optionally match indirection
in the 4th argument of semctl calls.
Andreas Schwab [Wed, 11 Mar 2015 16:47:56 +0000 (17:47 +0100)]
tests/ipc_*: match IPC_64 flag
* tests/ipc_msg.c (main): Optionally match "IPC_64|" in the third
argument of the ipc call.
* tests/ipc_sem.c (main): Likewise.
* tests/ipc_shm.c (main): Likewise.
Andreas Schwab [Thu, 12 Mar 2015 17:07:00 +0000 (18:07 +0100)]
aarch64: fix ioctl decoding
* linux/aarch64/ioctls_inc0.h: Rename from ioctls_inc1.h.
* linux/aarch64/ioctls_inc1.h: Rename from ioctls_inc0.h.
* linux/aarch64/ioctls_arch0.h: Rename from ioctls_arch1.h.
* linux/aarch64/ioctls_arch1.h: Rename from ioctls_arch0.h.
Andreas Schwab [Thu, 12 Mar 2015 15:47:38 +0000 (16:47 +0100)]
tests/select.test: handle architectures using pselect6 syscall
* tests/select.awk (BEGIN): Update regexps to match both select
and pselect6 syscalls.
* tests/select.test: Probe for both select and pselect6 syscall.
Dmitry V. Levin [Fri, 6 Mar 2015 01:47:18 +0000 (01:47 +0000)]
Move sigreturn/rt_sigreturn parser to a separate file
* sigreturn.c: New file.
* Makefile.am (strace_SOURCES): Add it.
* defs.h (sprintsigmask_n): New prototype.
(tprintsigmask_addr): New macro.
* signal.c (sprintsigmask_n): Make global.
(tprintsigmask_addr): Remove.
(sys_sigreturn): Move to sigreturn.c.
Dmitry V. Levin [Thu, 5 Mar 2015 17:30:23 +0000 (17:30 +0000)]
tests: robustify unix-yy.test
Implement additional synchronization between parent and child processes
to guarantee that the child starts closing connected socket only after
exiting of the parent's accept() syscall.
This guarantee seems to be necessary to reliably receive UNIX_DIAG_PEER
messages from NETLINK_SOCK_DIAG interface.
* tests/net-accept-connect.c: Implement additional synchronization
between parent and child processes.
* tests/unix-yy-connect.awk: Update.
Dmitry V. Levin [Thu, 5 Mar 2015 05:03:41 +0000 (05:03 +0000)]
Use SIGRTMIN from kernel headers
* configure.ac (ASM_SIGRTMIN): Define to SIGRTMIN from <asm/signal.h>.
* signal.c: Use ASM_SIGRTMIN instead of constants provided by libc.
* tests/sigreturn.c: Use ASM_SIGRTMIN instead of hardcoded value.
Use lower RT_* numbers to support pre-3.18 hppa kernels.
* tests/sigreturn.test: Update regexp.
signal.c:702:45: warning: signed and unsigned type in conditional expression [-Wsign-compare]
syscall.c:746:34: warning: initialization from incompatible pointer type [enabled by default]
* syscall.c [AARCH64] (aarch64_sp_ptr): Add explicit cast.
[AARCH64] (arm_sp_ptr): Change pointer type to unsigned.
* linux/aarch64/arch_regs.h (arm_sp_ptr): Update.
Dmitry V. Levin [Wed, 4 Mar 2015 23:55:25 +0000 (23:55 +0000)]
sigreturn: print signal mask as a syscall argument
Although sigreturn takes signal mask via frame pointer,
it's more convenient to display signal mask as a syscall argument
rather than an outstanding object of unknown nature:
Before this change:
sigreturn() (mask [USR2 CHLD RT_2 RT_3 RT_4 RT_31 RT_32]) = 0
After this change:
sigreturn({mask=[USR2 CHLD RT_2 RT_3 RT_4 RT_31 RT_32]}) = 0
* signal.c (sys_sigreturn): Display signal mask as a syscall argument.
Dmitry V. Levin [Wed, 4 Mar 2015 23:05:53 +0000 (23:05 +0000)]
aarch64: implement rt_sigreturn decoding
* linux/64/syscallent.h (139): Use sys_sigreturn for rt_sigreturn
decoding.
* syscall.c [ARM] (arm_regs): Make static.
[ARM] (arm_sp_ptr): New variable.
[AARCH64] (aarch64_sp_ptr, arm_sp_ptr): New variables.
* linux/aarch64/arch_regs.h: New file.
* linux/arm/arch_regs.h (arm_regs): Remove.
(arm_sp_ptr): New declaration.
* signal.c (sys_sigreturn) [ARM]: Use arm_sp_ptr.
[AARCH64]: Print signal mask.