Tom Lane [Fri, 6 Nov 2009 18:37:55 +0000 (18:37 +0000)]
Change plpgsql from using textual substitution to insert variable references
into SQL expressions, to using the newly added parser callback hooks.
This allows us to do the substitutions in a more semantically-aware way:
a variable reference will only be recognized where it can validly go,
ie, a place where a column value or parameter would be legal, instead of
the former behavior that would replace any textual match including
table names and column aliases (leading to syntax errors later on).
A release-note-worthy fine point is that plpgsql variable names that match
fully-reserved words will now need to be quoted.
This commit preserves the former behavior that variable references take
precedence over any possible match to a column name. The infrastructure
is in place to support the reverse precedence or throwing an error on
ambiguity, but those behaviors aren't accessible yet.
Most of the code changes here are associated with making the namespace
data structure persist so that it can be consulted at runtime, instead
of throwing it away at the end of initial function parsing.
The plpgsql scanner is still doing name lookups, but that behavior is
now irrelevant for SQL expressions. A future commit will deal with
removing unnecessary lookups.
Tom Lane [Thu, 5 Nov 2009 23:24:27 +0000 (23:24 +0000)]
Don't treat NEW and OLD as reserved words anymore. For the purposes of rules
it works just as well to have them be ordinary identifiers, and this gets rid
of a number of ugly special cases. Plus we aren't interfering with non-rule
usage of these names.
catversion bump because the names change internally in stored rules.
Tom Lane [Thu, 5 Nov 2009 16:58:36 +0000 (16:58 +0000)]
Remove plpgsql's RENAME declaration, which has bizarre and mostly nonfunctional
behavior, and is so little used that no one has been interested in fixing it.
To ensure that possible uses are covered, remove the ALIAS declaration's
arbitrary restriction that only $n identifiers can be aliased.
(We could alternatively make RENAME act just like ALIAS, but per discussion
having two different ways to do the same thing is probably more confusing than
helpful.)
Tom Lane [Thu, 5 Nov 2009 04:38:29 +0000 (04:38 +0000)]
Allow binary-coercible cases in ri_HashCompareOp; there are some such cases
that are not handled by find_coercion_pathway, notably composite->RECORD.
Now that 8.4 supports composites as primary keys, it's worth dealing with
this case.
Tom Lane [Wed, 4 Nov 2009 23:47:04 +0000 (23:47 +0000)]
Rename some encoding conversion modules to keep pathnames in our source
tarballs under 100 characters. This should avoid failures with certain
untarring tools (WinZip and Midnight Commander have been mentioned as
likely suspects). Per my proposal of yesterday.
catversion bumped since the initial contents of pg_proc change.
Tom Lane [Wed, 4 Nov 2009 23:15:08 +0000 (23:15 +0000)]
Make expression locations for LIKE and SIMILAR TO constructs uniformly point
at the first keyword of the expression, rather than drawing a rather
artificial distinction between the ESCAPE subclause and the rest.
Per gripe from Gokulakannan Somasundaram and subsequent discusssion.
Tom Lane [Wed, 4 Nov 2009 22:26:08 +0000 (22:26 +0000)]
Add support for invoking parser callback hooks via SPI and in cached plans.
As proof of concept, modify plpgsql to use the hooks. plpgsql is still
inserting $n symbols textually, but the "back end" of the parsing process now
goes through the ParamRef hook instead of using a fixed parameter-type array,
and then execution only fetches actually-referenced parameters, using a hook
added to ParamListInfo.
Although there's a lot left to be done in plpgsql, this already cures the
"if (TG_OP = 'INSERT' and NEW.foo ...)" problem, as illustrated by the
changed regression test.
Disable triggering failover with a signal in pg_standby on Windows, because
Windows doesn't do signal processing like other platforms do. It never
really worked, but recent changes to the signal handling made it crash.
In PLy_output(), when the elog() call in the TRY branch throws an exception
(this can happen when a statement timeout kicks in, for example), the
PyErr_SetString() call in the CATCH branch can cause a segfault, because the
Py_XDECREF(so) call before it releases memory that is still used by the sv
variable that PyErr_SetString() uses as argument, because sv points into
memory owned by so.
Backpatched back to 8.0, where this code was introduced.
I also threw in a couple of volatile declarations for variables that are used
before and after the TRY. I don't think they caused the crash that I
observed, but they could become issues.
Tom Lane [Sun, 1 Nov 2009 22:30:54 +0000 (22:30 +0000)]
Dept of second thoughts: after studying index_getnext() a bit more I realize
that it can scribble on scan->xs_ctup.t_self while following HOT chains,
so we can't rely on that to stay valid between hashgettuple() calls.
Introduce a private variable in HashScanOpaque, instead.
Tom Lane [Sun, 1 Nov 2009 21:25:25 +0000 (21:25 +0000)]
Fix two serious bugs introduced into hash indexes by the 8.4 patch that made
hash indexes keep entries sorted by hash value. First, the original plans for
concurrency assumed that insertions would happen only at the end of a page,
which is no longer true; this could cause scans to transiently fail to find
index entries in the presence of concurrent insertions. We can compensate
by teaching scans to re-find their position after re-acquiring read locks.
Second, neither the bucket split nor the bucket compaction logic had been
fixed to preserve hashvalue ordering, so application of either of those
processes could lead to permanent corruption of an index, in the sense
that searches might fail to find entries that are present.
This patch fixes the split and compaction logic to preserve hashvalue
ordering, but it cannot do anything about pre-existing corruption. We will
need to recommend reindexing all hash indexes in the 8.4.2 release notes.
To buy back the performance loss hereby induced in split and compaction,
fix them to use PageIndexMultiDelete instead of retail PageIndexDelete
operations. We might later want to do something with qsort'ing the
page contents rather than doing a binary search for each insertion,
but that seemed more invasive than I cared to risk in a back-patch.
Per bug #5157 from Jeff Janes and subsequent investigation.
Tom Lane [Sat, 31 Oct 2009 18:11:59 +0000 (18:11 +0000)]
Ensure the previous Perl interpreter selection is restored upon exit from
plperl_call_handler, in both the normal and error-exit paths. Per report
from Alexey Klyukin.
Tom Lane [Sat, 31 Oct 2009 01:41:31 +0000 (01:41 +0000)]
Implement parser hooks for processing ColumnRef and ParamRef nodes, as per my
recent proposal. As proof of concept, remove knowledge of Params from the
core parser, arranging for them to be handled entirely by parser hook
functions. It turns out we need an additional hook for that --- I had
forgotten about the code that handles inferring a parameter's type from
context.
This is a preliminary step towards letting plpgsql handle its variables
through parser hooks. Additional work remains to be done to expose the
facility through SPI, but I think this is all the changes needed in the core
parser.
Tom Lane [Fri, 30 Oct 2009 20:58:45 +0000 (20:58 +0000)]
Make the overflow guards in ExecChooseHashTableSize be more protective.
The original coding ensured nbuckets and nbatch didn't exceed INT_MAX,
which while not insane on its own terms did nothing to protect subsequent
code like "palloc(nbatch * sizeof(BufFile *))". Since enormous join size
estimates might well be planner error rather than reality, it seems best
to constrain the initial sizes to be not more than work_mem/sizeof(pointer),
thus ensuring the allocated arrays don't exceed work_mem. We will allow
nbatch to get bigger than that during subsequent ExecHashIncreaseNumBatches
calls, but we should still guard against integer overflow in those palloc
requests. Per bug #5145 from Bernt Marius Johnsen.
Although the given test case only seems to fail back to 8.2, previous
releases have variants of this issue, so patch all supported branches.
Tom Lane [Wed, 28 Oct 2009 18:51:56 +0000 (18:51 +0000)]
Un-break EXPLAIN for Append plans. I messed this up a few days ago while
adding the ModifyTable node type --- I had been thinking ModifyTable should
replace Append as a special case in push_plan(), but actually both of them
have to be special-cased.
Tom Lane [Wed, 28 Oct 2009 18:09:44 +0000 (18:09 +0000)]
Fix \df to re-allow regexp special characters in the function name pattern.
This has always worked, up until somebody's thinko here:
http://archives.postgresql.org/pgsql-committers/2009-04/msg00233.php
Per bug #5143 from Piotr Wolinski.
Tom Lane [Wed, 28 Oct 2009 17:36:50 +0000 (17:36 +0000)]
Fix AcquireRewriteLocks to be sure that it acquires the right lock strength
when FOR UPDATE is propagated down into a sub-select expanded from a view.
Similar bug to parser's isLockedRel issue that I fixed yesterday; likewise
seems not quite worth the effort to back-patch.
Tom Lane [Wed, 28 Oct 2009 14:55:47 +0000 (14:55 +0000)]
When FOR UPDATE/SHARE is used with LIMIT, put the LockRows plan node
underneath the Limit node, not atop it. This fixes the old problem that such
a query might unexpectedly return fewer rows than the LIMIT says, due to
LockRows discarding updated rows.
There is a related problem that LockRows might destroy the sort ordering
produced by earlier steps; but fixing that by pushing LockRows below Sort
would create serious performance problems that are unjustified in many
real-world applications, as well as potential deadlock problems from locking
many more rows than expected. Instead, keep the present semantics of applying
FOR UPDATE after ORDER BY within a single query level; but allow the user to
specify the other way by writing FOR UPDATE in a sub-select. To make that
work, track whether FOR UPDATE appeared explicitly in sub-selects or got
pushed down from the parent, and don't flatten a sub-select that contained an
explicit FOR UPDATE.
Tom Lane [Tue, 27 Oct 2009 20:14:27 +0000 (20:14 +0000)]
Fix AfterTriggerSaveEvent to use a test and elog, not just Assert, to check
that it's called within an AfterTriggerBeginQuery/AfterTriggerEndQuery pair.
The RI cascade triggers suppress that overhead on the assumption that they
are always run non-deferred, so it's possible to violate the condition if
someone mistakenly changes pg_trigger to mark such a trigger deferred.
We don't really care about supporting that, but throwing an error instead
of crashing seems desirable. Per report from Marcelo Costa.
Tom Lane [Tue, 27 Oct 2009 17:11:18 +0000 (17:11 +0000)]
Make FOR UPDATE/SHARE in the primary query not propagate into WITH queries;
for example in
WITH w AS (SELECT * FROM foo) SELECT * FROM w, bar ... FOR UPDATE
the FOR UPDATE will now affect bar but not foo. This is more useful and
consistent than the original 8.4 behavior, which tried to propagate FOR UPDATE
into the WITH query but always failed due to assorted implementation
restrictions. Even though we are in process of removing those restrictions,
it seems correct on philosophical grounds to not let the outer query's
FOR UPDATE affect the WITH query.
In passing, fix isLockedRel which frequently got things wrong in
nested-subquery cases: "FOR UPDATE OF foo" applies to an alias foo in the
current query level, not subqueries. This has been broken for a long time,
but it doesn't seem worth back-patching further than 8.4 because the actual
consequences are minimal. At worst the parser would sometimes get
RowShareLock on a relation when it should be AccessShareLock or vice versa.
That would only make a difference if someone were using ExclusiveLock
concurrently, which no standard operation does, and anyway FOR UPDATE
doesn't result in visible changes so it's not clear that the someone would
notice any problem. Between that and the fact that FOR UPDATE barely works
with subqueries at all in existing releases, I'm not excited about worrying
about it.
Fix range check in date_recv that tried to limit accepted values to only
those accepted by date_in(). I confused julian day numbers and number of
days since the postgres epoch 2000-01-01 in the original patch.
I just noticed that it's still easy to get such out-of-range values into
the database using to_date or +- operators, but this patch doesn't do
anything about those functions.
Tom Lane [Mon, 26 Oct 2009 02:26:45 +0000 (02:26 +0000)]
Re-implement EvalPlanQual processing to improve its performance and eliminate
a lot of strange behaviors that occurred in join cases. We now identify the
"current" row for every joined relation in UPDATE, DELETE, and SELECT FOR
UPDATE/SHARE queries. If an EvalPlanQual recheck is necessary, we jam the
appropriate row into each scan node in the rechecking plan, forcing it to emit
only that one row. The former behavior could rescan the whole of each joined
relation for each recheck, which was terrible for performance, and what's much
worse could result in duplicated output tuples.
Also, the original implementation of EvalPlanQual could not re-use the recheck
execution tree --- it had to go through a full executor init and shutdown for
every row to be tested. To avoid this overhead, I've associated a special
runtime Param with each LockRows or ModifyTable plan node, and arranged to
make every scan node below such a node depend on that Param. Thus, by
signaling a change in that Param, the EPQ machinery can just rescan the
already-built test plan.
This patch also adds a prohibition on set-returning functions in the
targetlist of SELECT FOR UPDATE/SHARE. This is needed to avoid the
duplicate-output-tuple problem. It seems fairly reasonable since the
other restrictions on SELECT FOR UPDATE are meant to ensure that there
is a unique correspondence between source tuples and result tuples,
which an output SRF destroys as much as anything else does.
Peter Eisentraut [Fri, 23 Oct 2009 05:24:52 +0000 (05:24 +0000)]
When querying a table with child tables, do not check permissions on the
child tables. This was found to be useless and confusing in virtually all
cases, and also contrary to the SQL standard.
Tom Lane [Wed, 21 Oct 2009 20:38:58 +0000 (20:38 +0000)]
Remove regex_flavor GUC, so that regular expressions are always "advanced"
style by default. Per discussion, there seems to be hardly anything that
really relies on being able to change the regex flavor, so the ability to
select it via embedded options ought to be enough for any stragglers.
Also, if we didn't remove the GUC, we'd really be morally obligated to
mark the regex functions non-immutable, which'd possibly create performance
issues.
Tom Lane [Wed, 21 Oct 2009 20:22:38 +0000 (20:22 +0000)]
Remove add_missing_from GUC and associated parser support for "implicit RTEs".
Per recent discussion, add_missing_from has been deprecated for long enough to
consider removing, and it's getting in the way of planned parser refactoring.
The system now always behaves as though add_missing_from were OFF.
Tom Lane [Fri, 16 Oct 2009 22:08:36 +0000 (22:08 +0000)]
Rewrite pam_passwd_conv_proc to be more robust: avoid assuming that the
pam_message array contains exactly one PAM_PROMPT_ECHO_OFF message.
Instead, deal with however many messages there are, and don't throw error
for PAM_ERROR_MSG and PAM_TEXT_INFO messages. This logic is borrowed from
openssh 5.2p1, which hopefully has seen more real-world PAM usage than we
have. Per bug #5121 from Ryan Douglas, which turned out to be caused by
the conv_proc being called with zero messages. Apparently that is normal
behavior given the combination of Linux pam_krb5 with MS Active Directory
as the domain controller.
Patch all the way back, since this code has been essentially untouched
since 7.4. (Surprising we've not heard complaints before.)
Tom Lane [Thu, 15 Oct 2009 23:39:13 +0000 (23:39 +0000)]
First committed version of plpython_unicode_0.out did not actually contain the
required \200 bytes. Let's see if this commit works, or if CVS is messing it up.
Tom Lane [Wed, 14 Oct 2009 22:14:25 +0000 (22:14 +0000)]
Support SQL-compliant triggers on columns, ie fire only if certain columns
are named in the UPDATE's SET list.
Note: the schema of pg_trigger has not actually changed; we've just started
to use a column that was there all along. catversion bumped anyway so that
this commit is included in the history of potentially interesting changes
to system catalog contents.
Rename the new MAX_AUTH_TOKEN_LENGTH #define to PG_MAX_AUTH_MAX_TOKEN_LENGTH,
to make it more obvious that it's a PostgreSQL internal limit, not something
that comes from system header files.
Peter Eisentraut [Wed, 14 Oct 2009 21:59:15 +0000 (21:59 +0000)]
In the configure check for the Python distutils module, use a less obscure
shell construct to hide away the stderr output. Python 3.1 actually core
dumps on the current invocation (http://bugs.python.org/issue7111), but the
new version also has the more general advantage of saving the error message
in config.log for analysis.
Raise the maximum authentication token (Kerberos ticket) size in GSSAPI
and SSPI athentication methods. While the old 2000 byte limit was more than
enough for Unix Kerberos implementations, tickets issued by Windows Domain
Controllers can be much larger.
Tom Lane [Tue, 13 Oct 2009 21:04:01 +0000 (21:04 +0000)]
Add "\pset linestyle ascii/unicode" option to psql, allowing our traditional
ASCII-art style of table output to be upgraded to use Unicode box drawing
characters if desired. By default, psql will use the Unicode characters
whenever client_encoding is UTF8.
The patch forces linestyle=ascii in pg_regress usage, ensuring we don't
break the regression tests in Unicode locales.
Tom Lane [Tue, 13 Oct 2009 14:33:14 +0000 (14:33 +0000)]
Fix ts_stat's failure on empty tsvector.
Also insert a couple of Asserts that check for stack overflow.
Bogus coding appears to be new in 8.4 --- older releases had a much
simpler algorithm here. Per bug #5111.
Tom Lane [Mon, 12 Oct 2009 23:41:45 +0000 (23:41 +0000)]
Use plurals (TABLES, FUNCTIONS, etc) in ALTER DEFAULT PRIVILEGES. We have
the keywords as a consequence of the GRANT ALL patch, so we might as well
use them and make the ALTER commands read more naturally.
Tom Lane [Mon, 12 Oct 2009 18:10:51 +0000 (18:10 +0000)]
Move the handling of SELECT FOR UPDATE locking and rechecking out of
execMain.c and into a new plan node type LockRows. Like the recent change
to put table updating into a ModifyTable plan node, this increases planning
flexibility by allowing the operations to occur below the top level of the
plan tree. It's necessary in any case to restore the previous behavior of
having FOR UPDATE locking occur before ModifyTable does.
This partially refactors EvalPlanQual to allow multiple rows-under-test
to be inserted into the EPQ machinery before starting an EPQ test query.
That isn't sufficient to fix EPQ's general bogosity in the face of plans
that return multiple rows per test row, though. Since this patch is
mostly about getting some plan node infrastructure in place and not about
fixing ten-year-old bugs, I will leave EPQ improvements for another day.
Another behavioral change that we could now think about is doing FOR UPDATE
before LIMIT, but that too seems like it should be treated as a followon
patch.
Tom Lane [Sat, 10 Oct 2009 03:50:15 +0000 (03:50 +0000)]
Improve similar_escape() in two different ways:
* Stop escaping ? and {. As of SQL:2008, SIMILAR TO is defined to have
POSIX-compatible interpretation of ? as well as {m,n} and related constructs,
so we should allow these things through to our regex engine.
* Escape ^ and $. It appears that our regex engine will treat ^^ at the
beginning of the string the same as ^, and similarly for $$ at the end of
the string, which meant that SIMILAR TO was effectively ignoring ^ at the
start of the pattern and $ at the end. Since these are not supposed to be
metacharacters, this is a bug.
The second part of this is arguably a back-patchable bug fix, but I'm
hesitant to do that because it might break applications that are expecting
something like "col SIMILAR TO '^foo$'" to work like a POSIX pattern.
Seems safer to only change it at a major version boundary.
Tom Lane [Sat, 10 Oct 2009 01:43:50 +0000 (01:43 +0000)]
Split the processing of INSERT/UPDATE/DELETE operations out of execMain.c.
They are now handled by a new plan node type called ModifyTable, which is
placed at the top of the plan tree. In itself this change doesn't do much,
except perhaps make the handling of RETURNING lists and inherited UPDATEs a
tad less klugy. But it is necessary preparation for the intended extension of
allowing RETURNING queries inside WITH.
Add a variant of pg_get_triggerdef with a second argument "pretty" that
causes the output to be formatted in the way pg_dump used to do. Use this
variant in pg_dump with server versions >= 8.5.
This insulates pg_dump from most future trigger feature additions, such as
the upcoming column triggers patch.
Tom Lane [Thu, 8 Oct 2009 22:34:57 +0000 (22:34 +0000)]
Remove very ancient tuple-counting infrastructure (IncrRetrieved() and
friends). This code has all been ifdef'd out for many years, and doesn't
seem to have any prospect of becoming any more useful in the future.
EXPLAIN ANALYZE is what people use in practice, and I think if we did want
process-wide counters we'd be more likely to put in dtrace events for that
than try to resurrect this code. Get rid of it so as to have one less detail
to worry about while refactoring execMain.c.
Tom Lane [Thu, 8 Oct 2009 02:39:25 +0000 (02:39 +0000)]
Support use of function argument names to identify which actual arguments
match which function parameters. The syntax uses AS, for example
funcname(value AS arg1, anothervalue AS arg2)
Alvaro Herrera [Wed, 7 Oct 2009 22:14:26 +0000 (22:14 +0000)]
Make it possibly to specify GUC params per user and per database.
Create a new catalog pg_db_role_setting where they are now stored, and better
encapsulate the code that deals with settings into its realm. The old
datconfig and rolconfig columns are removed.
psql has gained a \drds command to display the settings.
Backwards compatibility warning: while the backwards-compatible system views
still have the config columns, they no longer completely represent the
configuration for a user or database.
Alvaro Herrera [Wed, 7 Oct 2009 16:27:18 +0000 (16:27 +0000)]
Fix snapshot management, take two.
Partially revert the previous patch I installed and replace it with a more
general fix: any time a snapshot is pushed as Active, we need to ensure that it
will not be modified in the future. This means that if the same snapshot is
used as CurrentSnapshot, it needs to be copied separately. This affects
serializable transactions only, because CurrentSnapshot has already been copied
by RegisterSnapshot and so PushActiveSnapshot does not think it needs another
copy. However, CommandCounterIncrement would modify CurrentSnapshot, whereas
ActiveSnapshots must not have their command counters incremented.
I say "partially" because the regression test I added for the previous bug
has been kept.
(This restores 8.3 behavior, because before snapmgr.c existed, any snapshot set
as Active was copied.)
Per bug report from Stuart Bishop in
6bc73d4c0910042358k3d1adff3qa36f8df75198ecea@mail.gmail.com
Most things should be cleaned by "make clean", except the parts that are
shipped in the tarball. These rules had gotten a bit out of whack after
the various restructurings of the documentation build rules.
Tom Lane [Tue, 6 Oct 2009 00:55:26 +0000 (00:55 +0000)]
Change CREATE TABLE so that column default expressions coming from different
inheritance parent tables are compared using equal(), instead of doing
strcmp() on the nodeToString representation. The old implementation was
always a tad cheesy, and it finally fails completely as of 8.4, now that the
node tree might contain syntax location information. equal() knows it's
supposed to ignore those fields, but strcmp() hardly can. Per recent
report from Scott Ribe.
Tom Lane [Mon, 5 Oct 2009 19:24:49 +0000 (19:24 +0000)]
Create an ALTER DEFAULT PRIVILEGES command, which allows users to adjust
the privileges that will be applied to subsequently-created objects.
Such adjustments are always per owning role, and can be restricted to objects
created in particular schemas too. A notable benefit is that users can
override the traditional default privilege settings, eg, the PUBLIC EXECUTE
privilege traditionally granted by default for functions.
Tom Lane [Sat, 3 Oct 2009 20:04:39 +0000 (20:04 +0000)]
Fix assorted memory leaks in pg_hba.conf parsing. Over a sufficiently
large number of SIGHUP cycles, these would have run the postmaster out
of memory. Noted while testing memory-leak scenario in postgresql.conf
configuration-change-printing patch.
Tom Lane [Sat, 3 Oct 2009 18:04:57 +0000 (18:04 +0000)]
Fix a couple of issues in recent patch to print updates to postgresql.conf
settings: avoid calling superuser() in contexts where it's not defined,
don't leak the transient copies of GetConfigOption output, and avoid the
whole exercise in postmaster child processes.
I found that actually no current caller of GetConfigOption has any use for
its internal check of GUC_SUPERUSER_ONLY. But rather than just remove
that entirely, it seemed better to add a parameter indicating whether to
enforce the check.
Tom Lane [Fri, 2 Oct 2009 21:14:04 +0000 (21:14 +0000)]
Make sure that GIN fast-insert and regular code paths enforce the same
tuple size limit. Improve the error message for index-tuple-too-large
so that it includes the actual size, the limit, and the index name.
Sync with the btree occurrences of the same error.
Back-patch to 8.4 because it appears that the out-of-sync problem
is occurring in the field.
Tom Lane [Fri, 2 Oct 2009 18:13:04 +0000 (18:13 +0000)]
Fix erroneous handling of shared dependencies (ie dependencies on roles)
in CREATE OR REPLACE FUNCTION. The original code would update pg_shdepend
as if a new function was being created, even if it wasn't, with two bad
consequences: pg_shdepend might record the wrong owner for the function,
and any dependencies for roles mentioned in the function's ACL would be lost.
The fix is very easy: just don't touch pg_shdepend at all when doing a
function replacement.
Also update the CREATE FUNCTION reference page, which never explained
exactly what changes and doesn't change in a function replacement.
In passing, fix the CREATE VIEW reference page similarly; there's no
code bug there, but the docs didn't say what happens.
Alvaro Herrera [Fri, 2 Oct 2009 17:57:30 +0000 (17:57 +0000)]
Ensure that a cursor has an immutable snapshot throughout its lifespan.
The old coding was using a regular snapshot, referenced elsewhere, that was
subject to having its command counter updated. Fix by creating a private copy
of the snapshot exclusively for the cursor.
Backpatch to 8.4, which is when the bug was introduced during the snapshot
management rewrite.
Tom Lane [Wed, 30 Sep 2009 19:50:22 +0000 (19:50 +0000)]
Assorted improvements in contrib/hstore.
Remove the 64K limit on the lengths of keys and values within an hstore.
(This changes the on-disk format, but the old format can still be read.)
Add support for btree/hash opclasses for hstore --- this is not so much
for actual indexing purposes as to allow use of GROUP BY, DISTINCT, etc.
Add various other new functions and operators.
Tom Lane [Tue, 29 Sep 2009 01:20:34 +0000 (01:20 +0000)]
Fix equivclass.c's not-quite-right strategy for handling X=X clauses.
The original coding correctly noted that these aren't just redundancies
(they're effectively X IS NOT NULL, assuming = is strict). However, they
got treated that way if X happened to be in a single-member EquivalenceClass
already, which could happen if there was an ORDER BY X clause, for instance.
The simplest and most reliable solution seems to be to not try to process
such clauses through the EquivalenceClass machinery; just throw them back
for traditional processing. The amount of work that'd be needed to be
smarter than that seems out of proportion to the benefit.
Per bug #5084 from Bernt Marius Johnsen, and analysis by Andrew Gierth.
Andrew Dunstan [Mon, 28 Sep 2009 17:31:12 +0000 (17:31 +0000)]
Convert a perl array to a postgres array when returned by Set Returning Functions as well as non SRFs. Backpatch to 8.1 where these facilities were introduced. with a little help from Abhijit Menon-Sen.
Tom Lane [Sun, 27 Sep 2009 20:09:58 +0000 (20:09 +0000)]
Replace the array-style TupleTable data structure with a simple List of
TupleTableSlot nodes. This eliminates the need to count in advance
how many Slots will be needed, which seems more than worth the small
increase in the amount of palloc traffic during executor startup.
The ExecCountSlots infrastructure is now all dead code, but I'll remove it
in a separate commit for clarity.
Tom Lane [Sun, 27 Sep 2009 03:43:10 +0000 (03:43 +0000)]
Make libpq reject non-numeric and out-of-range port numbers with a suitable
error message, rather than blundering on and failing with something opaque.
Tom Lane [Sun, 27 Sep 2009 01:32:11 +0000 (01:32 +0000)]
Simplify the bootstrap (BKI) code by getting rid of a useless table of all
the strings seen during the bootstrap run. There might have been some
actual point to doing that, many years ago, but as far as I can see the only
value now is to conserve a bit of memory. Even if we cared about wasting
a megabyte or so during the initdb run, it'd be far more effective to
arrange to release memory at the end of each BKI command, instead of
intentionally hanging onto strings that might never be used again.
Not maintaining the table probably makes it faster too; but the main point
of this patch is to get rid of a couple hundred lines of unnecessary and
rather crufty code.
Tom Lane [Sat, 26 Sep 2009 23:08:22 +0000 (23:08 +0000)]
Revert my ill-considered change that made formrdesc not insert the correct
relation rowtype OID into the relcache entries it builds. This ensures
that catcache copies of the relation tupdescs will be fully correct.
While the deficiency doesn't seem to have any effect in the current
sources, we have been bitten by not-quite-right catcache tupdescs before,
so it seems like a good idea to maintain the rule that they should be right.