Rodrigo Vivi [Fri, 5 Jun 2015 20:50:28 +0000 (13:50 -0700)]
linux-firmware: Add i915 DMC firmware
DMC provides additional graphics low-power idle states. It provides
capability to save and restore display registers across these low-power
states independently from the OS/Kernel.
This is the first release of DMC firmware for Skylake platforms.
skl_dmc_ver1.bin is a symbolik link to latest recommended minor release.
This major version will be just upgraded on code when it is required
software changes for API/ABI compatibility.
Yaniv Machani [Sun, 29 Mar 2015 20:22:12 +0000 (23:22 +0300)]
wl18xx: update firmware file, remove conf file
- Firmware file was updated (8.9.0.0.39), includes bug fixes and improvements.
- Configuration binary removed, it is no longer fits all releases.
Moreover it should be configured per HW platform.
More information can found in here :
http://processors.wiki.ti.com/index.php/Open_Source_Wireless_Connectivity_wlconf
Daniel Drake [Fri, 8 May 2015 08:41:53 +0000 (10:41 +0200)]
linux-firmware: Add Realtek Bluetooth HCD firmware
By uploading these firmware files to the Realtek Bluetooth HCD
(on the USB bus), the HCD becomes compliant with standard btusb
interfaces. The code to automatically upload the firmware has
been already upstreamed and it is currently in linux-next.
Signed-off-by: Daniel Drake <drake@endlessm.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Kalle Valo [Fri, 10 Apr 2015 17:34:54 +0000 (20:34 +0300)]
ath3k: update AR3012 2.2.1 firmware with v.170
This is the latest firmware version for AR3012 2.2.1.
This also includes configuration file for coex support,
where all Bluetooth traffic is treated as high priority.
Signed-off-by: Kalle Valo <kvalo@qca.qualcomm.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Arend van Spriel [Fri, 20 Mar 2015 12:44:01 +0000 (13:44 +0100)]
brcm: add firmware files for BCM43602 PCIe device
This patch adds firmware files for the BCM43602 PCIe device
supported by brcmfmac. This device is used in router equipment
like Netgear R8000. For this reason there are two firmware
files in this patch.
Signed-off-by: Arend van Spriel <arend@broadcom.com> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Adrian Chadd [Tue, 10 Mar 2015 23:42:13 +0000 (16:42 -0700)]
Add v1.4.0 firmware for ath9k_htc.
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Signed-off-by: Adrian Chadd <adrian@FreeBSD.org> Signed-off-by: Kyle McMartin <kyle@kernel.org>
Adrian Chadd [Wed, 4 Mar 2015 18:06:34 +0000 (10:06 -0800)]
Add v1.4.0 firmware for ath9k_htc.
This fixes a variety of issues, including but not limited to:
ath9k_htc_firmware: check only the mesh control present subfield
Fix: bug in extend_tsf near 0x8000000 values
FIX: support rstamps from the future too.
Firmware sometimes returns erroneous timestamps(2)
Fixed incorrect wrapping handling in ath_extend_tsf().
Firmware sometimes returns erroneous timestamps
Added proper synchronization while handling lower 32 bit and
upper 32 bit parts in ar5416GetTsf64().
Fix resetting of txstatus flags.
Fix Array Out of Bounds in rcSibUpdate_ht()
ath9k_htc_firmware: fix the offset of CCMP header for mesh data frame
init.c: do cold reboot on exception
wmi:eadd new command WMI_REG_RMW_CMDID
remove transfer type patches for EP3 and EP4
k2_fw_usb_api: workaround for EP4 bug.
k2_fw_usb_api: prevent buffer overflow.
k2_fw_usb_api: fix typo in usb reg address
k2_fw_usb_api: add delay after mac reset
simplify STBC handling
This has been tested on both AR7010 and AR9271 devices.
Rasesh Mody [Wed, 18 Feb 2015 00:10:20 +0000 (19:10 -0500)]
linux-firmware: Add QLogic BR Series Adapter Firmware
This patch rebrands the BFA/BNA inbox driver firmwares.
This patch adds 3.2.5.1 firmware files for QLogic BR-series Adapters that will
be used with the inbox drivers(BFA and BNA).
Avinash Patil [Tue, 27 Jan 2015 10:32:53 +0000 (16:02 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p112
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Wed, 17 Dec 2014 12:12:07 +0000 (17:42 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p106
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to p103
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p103
Bluetooth (SDIO) firmware version: 15.28.4.p103
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Bing Zhao [Tue, 27 May 2014 21:37:20 +0000 (14:37 -0700)]
linux-firmware: update Marvell 8897-B0 firmware images to p73
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p73
Bluetooth (SDIO) firmware version: 15.28.4.p73
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p73
Bluetooth (USB) firmware version: 15.28.4.p73
The combo image will be downloaded through WLAN only.
Signed-off-by: Bing Zhao <bzhao@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Tue, 27 Jan 2015 10:32:53 +0000 (16:02 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p112
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p112
Bluetooth (SDIO) firmware version: 15.28.4.p112
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p112
Bluetooth (USB) firmware version: 15.28.4.p112
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Avinash Patil [Wed, 17 Dec 2014 12:12:07 +0000 (17:42 +0530)]
linux-firmware: update Marvell 8897-B0 firmware images to p106
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p106
Bluetooth (SDIO) firmware version: 15.28.4.p106
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p106
Bluetooth (USB) firmware version: 15.28.4.p106
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
WLAN (SDIO) firmware version: 15.68.7.p5
Bluetooth (SDIO) firmware version: 15.29.7.p5
The combo image can be downloaded through either WLAN or Bluetooth.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
linux-firmware: update Marvell 8897-B0 firmware images to p103
SD8897:
WLAN (SDIO) firmware version: 15.68.4.p103
Bluetooth (SDIO) firmware version: 15.28.4.p103
The combo image can be downloaded through either WLAN or
Bluetooth.
PCIe/USB-8897:
WLAN (PCIe) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
USB8897:
WLAN (USB) firmware version: 15.68.4.p103
Bluetooth (USB) firmware version: 15.28.4.p103
The combo image will be downloaded through WLAN only.
Signed-off-by: Avinash Patil <patila@marvell.com> Signed-off-by: Cathy Luo <cluo@marvell.com> Signed-off-by: Frank Huang <frankh@marvell.com>
Larry Finger [Tue, 2 Sep 2014 16:00:48 +0000 (11:00 -0500)]
Update firmware for rtl8821ae
This version corresponds to the firmware in the vendor's driver labelled
rtlwifi_linux_mac80211_0019.0320.2014V628. Firmware rtl8821aefw_wowlan.bin
is new with this release.
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net> Signed-off-by: Kyle McMartin <kyle@kernel.org>