Tom Lane [Mon, 16 Apr 2018 20:06:47 +0000 (16:06 -0400)]
Fix broken collation-aware searches in SP-GiST text opclass.
spg_text_leaf_consistent() supposed that it should compare only
Min(querylen, entrylen) bytes of the two strings, and then deal with
any excess bytes in one string or the other by assuming the longer
string is greater if the prefixes are equal. Quite aside from the
fact that that's just wrong in some locales (e.g., 'ch' is not less
than 'd' in cs_CZ), it also risked passing incomplete multibyte
characters to strcoll(), with ensuing bad results.
Instead, just pass the full strings to varstr_cmp, and let it decide
what to do about unequal-length strings.
Fortunately, this error doesn't imply any index corruption, it's just
that searches might return the wrong set of entries.
Per report from Emre Hasegeli, though this is not his patch.
Thanks to Peter Geoghegan for review and discussion.
This code was born broken, so back-patch to all supported branches.
In HEAD, I failed to resist the temptation to do a bit of cosmetic
cleanup/pgindent'ing on 710d90da1, too.
Ignore whole-rows in INSERT/CONFLICT with partitioned tables
We had an Assert() preventing whole-row expressions from being used in
the SET clause of INSERT ON CONFLICT, but it seems unnecessary, given
some tests, so remove it. Add a new test to exercise the case.
Still at ExecInitPartitionInfo, we used map_partition_varattnos (which
constructs an attribute map, then calls map_variable_attnos) using
the same two relations many times in different expressions and with
different parameters. Constructing the map over and over is a waste.
To avoid this repeated work, construct the map once, and use
map_variable_attnos() directly instead.
Author: Amit Langote, per comments by me (Álvaro)
Discussion: https://postgr.es/m/20180326142016.m4st5e34chrzrknk@alvherre.pgsql
Tom Lane [Sun, 15 Apr 2018 17:02:11 +0000 (13:02 -0400)]
Fix potentially-unportable code in contrib/adminpack.
Spelling access(2)'s second argument as "2" is just horrid.
POSIX makes no promises as to the numeric values of W_OK and related
macros. Even if it accidentally works as intended on every supported
platform, it's still unreadable and inconsistent with adjacent code.
In passing, don't spell "NULL" as "0" either. Yes, that's legal C;
no, it's not project style.
Back-patch, just in case the unportability is real and not theoretical.
(Most likely, even if a platform had different bit assignments for
access()'s modes, there'd not be an observable behavior difference
here; but I'm being paranoid today.)
Tom Lane [Sun, 15 Apr 2018 16:40:01 +0000 (12:40 -0400)]
Clean up callers of JsonbIteratorNext().
Coverity complained about the lack of a check on the return value in
parse_jsonb_index_flags' last call of JsonbIteratorNext. Seems like
a reasonable gripe to me, especially since the code is depending on
that being WJB_DONE to not leak memory, so add a check.
In passing, improve a couple other places where the result was being
ignored, either by adding an assert or at least a cast to void.
Also, don't spell "WJB_DONE" as "0". That's horrid coding style,
and it wasn't consistent either.
Magnus Hagander [Sun, 15 Apr 2018 11:57:02 +0000 (13:57 +0200)]
Fix build of pg_verify_checksum docs
They were accidentally excluded when reverting the backend online
checksum functionality, and since they weren't built the incorrect
reference to a removed section also did not trigger a problem.
Tom Lane [Sun, 15 Apr 2018 01:00:54 +0000 (21:00 -0400)]
Simplify view-expansion code in rewriteHandler.c.
In the wake of commit 50c6bb022, it's not necessary for ApplyRetrieveRule
to have a forUpdatePushedDown parameter. By the time control gets here for
any given view-referencing RTE, we should already have pushed down the
effects of any FOR UPDATE/SHARE clauses affecting the view from outer query
levels. Hence if we don't find a RowMarkClause at the current query level,
that's sufficient proof that there is no outer one either. This in turn
means we need no forUpdatePushedDown parameter for fireRIRrules.
I wonder whether we oughtn't also revert commit cba2d2717, since it now
seems likely that that was band-aiding around the bad effects of doing
FOR UPDATE pushdown and view expansion in the wrong order. However,
in the absence of evidence that the current coding of markQueryForLocking
is actually buggy (i.e. missing RTEs it ought to mark), it seems best to
leave it alone.
There's been a massive addition of partitioning code in PostgreSQL 11,
with little oversight on its placement, resulting in a
catalog/partition.c with poorly defined boundaries and responsibilities.
This commit tries to set a couple of distinct modules to separate things
a little bit. There are no code changes here, only code movement.
There are three new files:
src/backend/utils/cache/partcache.c
src/include/partitioning/partdefs.h
src/include/utils/partcache.h
The previous arrangement of #including catalog/partition.h almost
everywhere is no more.
Authors: Amit Langote and Álvaro Herrera
Discussion: https://postgr.es/m/98e8d509-790a-128c-be7f-e48a5b2d8d97@lab.ntt.co.jp
https://postgr.es/m/11aa0c50-316b-18bb-722d-c23814f39059@lab.ntt.co.jp
https://postgr.es/m/143ed9a4-6038-76d4-9a55-502035815e68@lab.ntt.co.jp
https://postgr.es/m/20180413193503.nynq7bnmgh6vs5vm@alvherre.pgsql
Tom Lane [Sat, 14 Apr 2018 23:02:30 +0000 (19:02 -0400)]
Improve regression test coverage of expand_tuple().
I was dissatisfied with the code coverage report for expand_tuple() in the
wake of commit 7c44c46de: while better than no coverage at all, it was
still not exercising the core function of inserting out-of-line default
values, nor was the HeapTuple-output path covered. So far as I can find,
the only code path that reaches the latter at present is EvalPlanQual
fetches for non-locked tables. Hence, extend eval-plan-qual.spec to
test cases where out-of-line defaults must be inserted into a tuple
fetched from a non-locked table.
Tom Lane [Sat, 14 Apr 2018 19:38:09 +0000 (15:38 -0400)]
Fix enforcement of SELECT FOR UPDATE permissions with nested views.
SELECT FOR UPDATE on a view should require UPDATE (as well as SELECT)
permissions on the view, and then the view's owner needs those same
permissions against the relations it references, and so on all the way
down to base tables. But ApplyRetrieveRule did things in the wrong order,
resulting in failure to mark intermediate view levels as needing UPDATE
permission. Thus for example, if user A creates a table T and an updatable
view V1 on T, then grants only SELECT permissions on V1 to user B, B could
create a second view V2 on V1 and then would be allowed to perform SELECT
FOR UPDATE via V2 (since V1 wouldn't be checked for UPDATE permissions).
To fix, just switch the order of expanding sub-views and marking referenced
objects as needing UPDATE permission. I think additional simplifications
are now possible, but that's distinct from the bug fix proper.
This is certainly a security issue, but the consequences are pretty minor
(just the ability to lock rows that shouldn't be lockable). Against that
we have a small risk of breaking applications that are working as-desired,
since nested views have behaved this way since such cases worked at all.
On balance I'm inclined not to back-patch.
Tom Lane [Sat, 14 Apr 2018 16:33:15 +0000 (12:33 -0400)]
Add commentary explaining why MaxIndexTuplesPerPage calculation is safe.
MaxIndexTuplesPerPage ignores the fact that btree indexes sometimes
store tuples with no data payload. But it also ignores the possibility
of "special space" on index pages, which offsets that, so that the
result isn't an underestimate. This all seems worth documenting, though.
In passing, remove #define MinIndexTupleSize, which was added by
commit 2c03216d8 but not used in that commit nor later ones.
Comment text by me; issue noticed by Peter Geoghegan.
Tom Lane [Fri, 13 Apr 2018 16:53:45 +0000 (12:53 -0400)]
In libpq, free any partial query result before collecting a server error.
We'd throw away the partial result anyway after parsing the error message.
Throwing it away beforehand costs nothing and reduces the risk of
out-of-memory failure. Also, at least in systems that behave like
glibc/Linux, if the partial result was very large then the error PGresult
would get allocated at high heap addresses, preventing the heap storage
used by the partial result from being released to the OS until the error
PGresult is freed.
In psql >= 9.6, we hold onto the error PGresult until another error is
received (for \errverbose), so that this behavior causes a seeming
memory leak to persist for awhile, as in a recent complaint from
Darafei Praliaskouski. This is a potential performance regression from
older versions, justifying back-patching at least that far. But similar
behavior may occur in other client applications, so it seems worth just
back-patching to all supported branches.
Use custom hash opclass for hash partition pruning
This custom opclass was already in use in other tests -- defined
independently in every such file. Move the definition to the earliest
test that uses it, and keep it around so that later tests can reuse it.
Use it in the tests for pruning of hash partitioning, and since this
makes the second expected file unnecessary, put those tests back in
partition_prune.sql whence they sprang.
Author: Amit Langote
Discussion: https://postgr.es/m/CA%2BTgmoZ0D5kJbt8eKXtvVdvTcGGWn6ehWCRSZbWytD-uzH92mQ%40mail.gmail.com
Attempt to stabilize partition_prune test output (2)
Environmental conditions might cause parallel workers to be scheduled in
different ways in this test, destabilizing the EXPLAIN output. Disable
use of workers in an attempt to make output stable.
Author: David Rowley Diagnosed-by: Thomas Munro
Discussion: https://postgr.es/m/CAKJS1f8j24tUX_nOwACiM=UO5jrMrDz8ca0xbG0vhVgfWph0ZA@mail.gmail.com
Tom Lane [Thu, 12 Apr 2018 22:39:51 +0000 (18:39 -0400)]
Fix bogus affix-merging code.
NISortAffixes() compared successive compound affixes incorrectly,
thus possibly failing to merge identical affixes, or (less likely)
merging ones that shouldn't be merged. The user-visible effects
of this are unclear, to me anyway.
Per bug #15150 from Alexander Lakhin. It's been broken for a long time,
so back-patch to all supported branches.
Revert lowering of lock level for ATTACH PARTITION
I lowered the lock level for partitions being scanned from
AccessExclusive to ShareLock in the course of 72cf7f310c07, but that was
bogus, as pointed out by Robert Haas. Revert that bit. Doing this is
possible, but requires more work.
Tom Lane [Thu, 12 Apr 2018 19:12:06 +0000 (15:12 -0400)]
YA attempt to stabilize the results of the postgres_fdw regression test.
We've made multiple attempts to stabilize the plans shown by commit 1bc0100d2, with little success so far. The reason for the remaining
instability seems to be that if a transaction (such as auto-analyze)
is running concurrently with the test, then get_actual_variable_range may
return a maximum value for "T 1"."C 1" that's far away from the actual max,
as a result of our having transiently inserted such a value earlier in
the test. Because we use a non-MVCC snapshot to fetch the value (for
performance reasons), the presence of other transactions can cause that
function to return entries that are actually dead.
To fix, use a less extreme value in the earlier transient insertion, so
that whether it is visible or not won't affect the selectivity estimate.
The use of 9999 there seems to have been picked with the aid of a
dartboard anyway, rather than having a specific reason.
Use the right memory context for partkey's FmgrInfo
We were using CurrentMemoryContext to put the partsupfunc fmgr_info
into, which isn't right, because we want the PartitionKey as a whole to
be in the isolated Relation->rd_partkeycxt context. This can cause a
crash with user-defined support functions in the operator classes used
by partitioning keys. (Maybe this can cause problems with core-supplied
opclasses too, not sure.)
This is demonstrably broken in Postgres 10, too, but the initial
proposed fix runs afoul of a problem discussed back when 8a0596cb656e
("Get rid of copy_partition_key") reorganized that code: namely that it
is possible to jump out of RelationBuildPartitionKey because of some
error and leave a dangling memory context child of CacheMemoryContext.
Also, while reviewing this I noticed that the removed-in-pg11
copy_partition_key was doing something wrong, unfixed in pg10, namely
doing memcpy() on the FmgrInfo, which is bogus (should be doing
fmgr_info_copy). Therefore, in branch pg10, the sane fix seems to be to
backpatch both the aforementioned 8a0596cb656e and its followup be2343221fb7 ("Protect against hypothetical memory leaks in
RelationGetPartitionKey"), so do that, then apply the fmgr_info memcxt
bugfix on top.
Add a test case exercising btree-based custom operator classes, which
causes a crash prior to this fix. This is not a security problem,
because in order to create an operator class you need superuser
privileges anyway.
Authors: Álvaro Herrera and Amit Langote
Reported and diagnosed by: Amit Langote
Discussion: https://postgr.es/m/3041e853-b1dd-a0c6-ff21-7cc5633bffd0@lab.ntt.co.jp
Fix interference between covering indexes and partitioned tables
The bug is caused due to the original IndexStmt that DefineIndex receives
being overwritten when processing the INCLUDE columns. Use separate list of
index params to propagate to child tables. Add tests covering this case.
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE ddb4158579 MERGE syntax diagram correction 530e69e59b Allow cpluspluscheck to pass by renaming variable 01b88b4df5 MERGE minor errata 3af7b2b0d4 MERGE fix variable warning in non-assert builds a5d86181ec MERGE INSERT allows only one VALUES clause 4b2d44031f MERGE post-commit review 4923550c20 Tab completion for MERGE aa3faa3c7a WITH support in MERGE 83454e3c2b New files for MERGE d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee Reviewed-by: Michael Paquier
Rename ii_KeyAttrNumbers to ii_IndexAttrNumbers to prevent confusion with
ii_NumIndexAttrs/ii_NumIndexKeyAttrs. ii_IndexAttrNumbers contains
all attributes including "including" columns, not only key attribute.
Oversight in commit 8b08f7d4820f: pg_class.relispartition was not
being set for index partitions, which is a bit odd, and was also causing
the code to unnecessarily call has_superclass() when simply checking the
flag was enough.
Author: Álvaro Herrera Reported-by: Amit Langote
Discussion: https://postgr.es/m/12085bc4-0bc6-0f3a-4c43-57fe0681772b@lab.ntt.co.jp
Tom Lane [Wed, 11 Apr 2018 22:11:29 +0000 (18:11 -0400)]
Ignore nextOid when replaying an ONLINE checkpoint.
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Tom Lane [Wed, 11 Apr 2018 21:41:09 +0000 (17:41 -0400)]
Do not select new object OIDs that match recently-dead entries.
When selecting a new OID, we take care to avoid picking one that's already
in use in the target table, so as not to create duplicates after the OID
counter has wrapped around. However, up to now we used SnapshotDirty when
scanning for pre-existing entries. That ignores committed-dead rows, so
that we could select an OID matching a deleted-but-not-yet-vacuumed row.
While that mostly worked, it has two problems:
* If recently deleted, the dead row might still be visible to MVCC
snapshots, creating a risk for duplicate OIDs when examining the catalogs
within our own transaction. Such duplication couldn't be visible outside
the object-creating transaction, though, and we've heard few if any field
reports corresponding to such a symptom.
* When selecting a TOAST OID, deleted toast rows definitely *are* visible
to SnapshotToast, and will remain so until vacuumed away. This leads to
a conflict that will manifest in errors like "unexpected chunk number 0
(expected 1) for toast value nnnnn". We've been seeing reports of such
errors from the field for years, but the cause was unclear before.
The fix is simple: just use SnapshotAny to search for conflicting rows.
This results in a slightly longer window before object OIDs can be
recycled, but that seems unlikely to create any large problems.
Allocate enough shared string memory for stats of auxiliary processes.
This fixes a bug whereby the st_appname, st_clienthostname, and
st_activity_raw fields for auxiliary processes point beyond the end of
their respective shared memory segments. As a result, the application_name
of a backend might show up as the client hostname of an auxiliary process.
Backpatch to v10, where this bug was introduced, when the auxiliary
processes were added to the array.
Author: Edmund Horner Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
Make local copy of client hostnames in backend status array.
The other strings, application_name and query string, were snapshotted to
local memory in pgstat_read_current_status(), but we forgot to do that for
client hostnames. As a result, the client hostname would appear to change in
the local copy, if the client disconnected.
Backpatch to all supported versions.
Author: Edmund Horner Reviewed-by: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAMyN-kA7aOJzBmrYFdXcc7Z0NmW%2B5jBaf_m%3D_-77uRNyKC9r%3DA%40mail.gmail.com
If the table being attached contained values that contradict the default
partition's partition constraint, it would fail to complain, because
CommandCounterIncrement changes in 4dba331cb3dc coupled with some bogus
coding in the existing ValidatePartitionConstraints prevented the
partition constraint from being validated after all -- or rather, it
caused to constraint to become an empty one, always succeeding.
Fix by not re-reading the OID of the default partition in
ATExecAttachPartition. To forestall similar problems, revise the
existing code:
* rename routine from ValidatePartitionConstraints() to
QueuePartitionConstraintValidation, to better represent what it
actually does.
* add an Assert() to make sure that when queueing a constraint for a
partition we're not overwriting a constraint previously queued.
* add an Assert() that we don't try to invoke the special-purpose
validation of the default partition when attaching the default
partition itself.
While at it, change some loops to obtain partition OIDs from
partdesc->oids rather than find_all_inheritors; reduce the lock level
of partitions being scanned from AccessExclusiveLock to ShareLock;
rewrite QueuePartitionConstraintValidation in a recursive fashion rather
than repetitive.
Author: Álvaro Herrera. Tests written by Amit Langote Reported-by: Rushabh Lathia Diagnosed-by: Kyotaro HORIGUCHI, who also provided the initial fix. Reviewed-by: Kyotaro HORIGUCHI, Amit Langote, Jeevan Ladhe
Discussion: https://postgr.es/m/CAGPqQf0W+v-Ci_qNV_5R3A=Z9LsK4+jO7LzgddRncpp_rrnJqQ@mail.gmail.com
Tom Lane [Wed, 11 Apr 2018 17:18:50 +0000 (13:18 -0400)]
Invoke submake-generated-headers during "make check", too.
The MAKELEVEL hack to prevent submake-generated-headers from doing
anything in child make runs means that we have to explicitly invoke
it at top level for "make check", too, in case somebody proceeds
directly to that without an explicit "make all". (I think this
usage had parallel-make hazards even before the addition of more
generated headers; but it was totally broken as of 3b8f6e75f.)
Out of paranoia, force the submake-libpq target to depend on
submake-generated-headers, too. This seems to not be absolutely
necessary today, but it's not really saving us anything to omit
the ordering dependency, and it'll likely break someday without it.
Fix interference between cavering indexes and partitioned tables
The bug is caused due to the original IndexStmt that DefineIndex receives
being overwritten when processing the INCLUDE columns. Use separate list of
index params to propagate to child tables. Add tests covering this case.
Tom Lane [Tue, 10 Apr 2018 22:34:40 +0000 (18:34 -0400)]
Fix incorrect close() call in dsm_impl_mmap().
One improbable error-exit path in this function used close() where
it should have used CloseTransientFile(). This is unlikely to be
hit in the field, and I think the consequences wouldn't be awful
(just an elog(LOG) bleat later). But a bug is a bug, so back-patch
to 9.4 where this code came in.
Andrew Dunstan [Tue, 10 Apr 2018 22:21:03 +0000 (18:21 -0400)]
Adjustments to the btree fastpath optimization.
This optimization was introduced in commit 2b272734. The changes include
some additional comments and documentation, and also these more
substantive changes:
. ensure the optimization is only applied on the leaf node of a tree
whose root is on level 2 or more. It's of little value on small trees.
. Delay calling RelationSetTargetBlock() until after the critical
section of _bt_insertonpg
. ensure the optimization is also applied to unlogged tables.
Pavan Deolasee and Peter Geoghegan with some very light editing from me.
Tom Lane [Tue, 10 Apr 2018 20:14:55 +0000 (16:14 -0400)]
Put back parallel-safety guards in plpython and src/test/regress/.
I'd hoped that commit 3b8f6e75f was sufficient to ensure parallel safety
even when a build started in a subdirectory requires rebuilding of
generated headers. This isn't so, because making submake-generated-headers
a prerequisite of "all" isn't enough to ensure it's completed before
starting on "all"'s other prerequisites. The explicit dependencies we put
on the recursive make targets ensure safe ordering before we recurse into
child directories, but they don't protect targets to be made in the current
directory. Hence, put back some ordering dependencies in directories that
we've traditionally expected to be starting points for "standalone" builds,
to wit src/pl/plpython and src/test/regress. (The former needs this in
order to minimize the work involved in building for both python 2 and
python 3; the latter to support packagings that make the regression tests
available for out-of-build-tree execution.) Adjust some other dependencies
so that these two cases work correctly even at high -j settings.
I'm not terribly happy with this partial solution, but I don't see a
way to do better without massive makefile restructuring, which we surely
aren't doing at this point in the development cycle. In any case, it's
little if any worse than what we had in prior releases.
Fix IndexOnlyScan counter for heap fetches in parallel mode
The HeapFetches counter was using a simple value in IndexOnlyScanState,
which fails to propagate values from parallel workers; so the counts are
wrong when IndexOnlyScan runs in parallel. Move it to Instrumentation,
like all the other counters.
While at it, change INSERT ON CONFLICT conflicting tuple counter to use
the new ntuples2 instead of nfiltered2, which is a blatant misuse.
Tom Lane [Tue, 10 Apr 2018 16:41:51 +0000 (12:41 -0400)]
Fix pgxs.mk to not try to build generated headers in external builds.
Per Julien Rouhaud and the buildfarm. This is not quite Julien's
patch: there's no need to lobotomize this build rule when building
contrib modules in-tree, so set NO_GENERATED_HEADERS only if PGXS.
In passing, also set NO_TEMP_INSTALL in external builds. This doesn't
seem to be fixing any live bug, because "make check" in an external
build just produces the expected error message without first trying to
make a temp install ... but it's far from obvious why it doesn't, so
this change seems like good future-proofing.
Fix comment on B-tree insertion fastpath condition.
The comment earlier in the function correctly states "and the insertion
key is strictly greater than the first key in this page". That is what
we check here, not "greater than or equal".
Tom Lane [Mon, 9 Apr 2018 20:42:02 +0000 (16:42 -0400)]
Fix partial-build problems introduced by having more generated headers.
Commit 372728b0d created some problems for usages like building a
subdirectory without having first done "make all" at the top level,
or for proceeding directly to "make install" without "make all".
The only reasonably clean way to fix this seems to be to force the
submake-generated-headers rule to fire in *any* "make all" or "make
install" command anywhere in the tree. To avoid lots of redundant work,
as well as parallel make jobs possibly clobbering each others' output, we
still need to be sure that the rule fires only once in a recursive build.
For that, adopt the same MAKELEVEL hack previously used for "temp-install".
But try to document it a bit better.
The submake-errcodes mechanism previously used in src/port/ and src/common/
is subsumed by this, so we can get rid of those special cases. It was
inadequate for src/common/ anyway after the aforesaid commit, and it always
risked parallel attempts to build errcodes.h.
Fix incorrect logic for choosing the next Parallel Append subplan
In 499be013de support for pruning unneeded Append subnodes was added.
The logic in that commit was not correctly checking if the next subplan
was in fact a valid subplan. This could cause parallel workers processes
to be given a subplan to work on which didn't require any work.
Per code review following an otherwise unexplained regression failure in
buildfarm member Pademelon. (We haven't been able to reproduce the
failure, so this is a bit of a blind fix in terms of whether it'll
actually fix it; but it is a clear bug nonetheless).
In passing, also add a comment to explain what first_partial_plan means.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_E5r05hHUVG3UmCQJ49DGKKHtN=SHybD44LdzBn+CJng@mail.gmail.com
Magnus Hagander [Mon, 9 Apr 2018 19:33:33 +0000 (21:33 +0200)]
Make sure pg_rewind can't run as root
Previously a warning was printed, but the tool actually kept running
even when running as root. This is something we definitely want to
prevent, but since this means a behavior change, not backpatching.
Tom Lane [Mon, 9 Apr 2018 19:01:10 +0000 (15:01 -0400)]
Reduce chattiness of genbki.pl and Gen_fmgrtab.pl.
Make these scripts emit just one log message when they run, not one
per output file. The latter is way too verbose in the wake of
commit 372728b0d. The specific wording used is what already existed
in the MSVC scripts.
Tom Lane [Mon, 9 Apr 2018 18:58:39 +0000 (14:58 -0400)]
Make reformat_dat_file.pl preserve all blank lines.
In its original form, reformat_dat_file.pl smashed consecutive blank
lines to a single blank line, which was helpful for mopping up excess
whitespace during the bootstrap data format conversion. But going
forward, there seems little reason to do that; if developers want to
put in multiple blank lines, let 'em. This makes it conform to the
documentation I (tgl) wrote, too.
In passing, clean up some sloppy markup choices in bki.sgml.
Tom Lane [Mon, 9 Apr 2018 18:39:58 +0000 (14:39 -0400)]
Further cleanup of client dependencies on src/include/catalog headers.
In commit 9c0a0de4c, I'd failed to notice that catalog/catalog.h
should also be considered a frontend-unsafe header, because it includes
(and needs) the full form of pg_class.h, not to mention relcache.h.
However, various frontend code was depending on it to get
TABLESPACE_VERSION_DIRECTORY, so refactoring of some sort is called for.
The cleanest answer seems to be to move TABLESPACE_VERSION_DIRECTORY,
as well as the OIDCHARS symbol, to common/relpath.h. Do that, and mop up
inclusions as necessary. (I found that quite a few current users of
catalog/catalog.h don't seem to need it at all anymore, apparently as a
result of the refactorings that created common/relpath.[hc]. And
initdb.c needed it only as a route to pg_class_d.h.)
Magnus Hagander [Mon, 9 Apr 2018 17:02:42 +0000 (19:02 +0200)]
Revert "Allow on-line enabling and disabling of data checksums"
This reverts the backend sides of commit 1fde38beaa0c3e66c340efc7cc0dc272d6254bb0.
I have, at least for now, left the pg_verify_checksums tool in place, as
this tool can be very valuable without the rest of the patch as well,
and since it's a read-only tool that only runs when the cluster is down
it should be a lot safer.
Add missed bms_copy() in perform_pruning_combine_step
We were initializing a BMS to merely reference an existing one, which
would cause a double-free (and a crash) when the recursive algorithm
tried to intersect it with an empty one. Fix it by creating a copy at
initialization time.
Reported-by: sqlsmith (by way of Andreas Seltenreich)
Author: Amit Langote
Discussion: https://postgr.es/m/87in923lyw.fsf@ansel.ydns.eu
Tom Lane [Sun, 8 Apr 2018 21:23:39 +0000 (17:23 -0400)]
Fix additional breakage in covering-index patch.
CheckIndexCompatible() misused ComputeIndexAttrs() by not bothering
to fill ii_NumIndexAttrs and ii_NumIndexKeyAttrs in the passed
IndexInfo. Omission of ii_NumIndexAttrs was previously unimportant,
but now this matters because ComputeIndexAttrs depends on
ii_NumIndexKeyAttrs to decide how many columns it needs to report on.
(BTW, the fact that this oversight wasn't detected earlier implies
that we have no regression test verifying whether CheckIndexCompatible
ever succeeds. Bad dog. Not the job of this patch to fix it, though.)
Also, change the API of ComputeIndexAttrs so that it fills the opclass
output array for all column positions, as it does for the options output
array; positions for non-key index columns are filled with zeroes.
This isn't directly fixing any bug, but it seems like a good idea.
Tom Lane [Sun, 8 Apr 2018 20:35:42 +0000 (16:35 -0400)]
Doc: clarify explanation of pg_dump usage.
This section confusingly used both "infile" and "outfile" to refer
to the same file, i.e. the textual output of pg_dump. Use "dumpfile"
for both cases, per suggestion from Jonathan Katz.
Tom Lane [Sun, 8 Apr 2018 19:55:49 +0000 (15:55 -0400)]
Cosmetic cleanups in initial catalog data.
Write ',' and ';' for typdelim values instead of the obscurantist
ASCII octal equivalents. Not sure why anybody ever thought the
latter were better; maybe it had something to do with lack of
a better quoting convention, twenty-plus years ago?
Reassign a couple of high-numbered OIDs that were left in during
yesterday's mad rush to commit stuff of uncertain internal
temperature.
The latter requires a catversion bump, though the former wouldn't
since the end-result catalog data is unchanged.
Tom Lane [Sun, 8 Apr 2018 19:08:32 +0000 (15:08 -0400)]
Reduce worst-case shell command line length during "make install".
Addition of the catalog/pg_foo_d.h headers seems to have pushed us over
the brink of the maximum command line length for some older platforms
during "make install" for our header files. The main culprit here is
repetition of the target directory path, which could be long.
Rearrange so that we don't repeat that once per file, but only once
per subdirectory.
Tom Lane [Sun, 8 Apr 2018 18:35:29 +0000 (14:35 -0400)]
Merge catalog/pg_foo_fn.h headers back into pg_foo.h headers.
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Tom Lane [Sun, 8 Apr 2018 17:59:52 +0000 (13:59 -0400)]
Switch client-side code to include catalog/pg_foo_d.h not pg_foo.h.
Everything of use to frontend code should now appear in the _d.h files,
and making this change frees us from needing to worry about whether the
catalog header files proper are frontend-safe.
Remove src/interfaces/ecpg/ecpglib/pg_type.h entirely, as the previous
commit reduced it to a confusingly-named wrapper around pg_type_d.h.
In passing, make test_rls_hooks.c follow project convention of including
our own files with #include "" not <>.
Tom Lane [Sun, 8 Apr 2018 17:16:50 +0000 (13:16 -0400)]
Replace our traditional initial-catalog-data format with a better design.
Historically, the initial catalog data to be installed during bootstrap
has been written in DATA() lines in the catalog header files. This had
lots of disadvantages: the format was badly underdocumented, it was
very difficult to edit the data in any mechanized way, and due to the
lack of any abstraction the data was verbose, hard to read/understand,
and easy to get wrong.
Hence, move this data into separate ".dat" files and represent it in a way
that can easily be read and rewritten by Perl scripts. The new format is
essentially "key => value" for each column; while it's a bit repetitive,
explicit labeling of each value makes the data far more readable and less
error-prone. Provide a way to abbreviate entries by omitting field values
that match a specified default value for their column. This allows removal
of a large amount of repetitive boilerplate and also lowers the barrier to
adding new columns.
Also teach genbki.pl how to translate symbolic OID references into
numeric OIDs for more cases than just "regproc"-like pg_proc references.
It can now do that for regprocedure-like references (thus solving the
problem that regproc is ambiguous for overloaded functions), operators,
types, opfamilies, opclasses, and access methods. Use this to turn
nearly all OID cross-references in the initial data into symbolic form.
This represents a very large step forward in readability and error
resistance of the initial catalog data. It should also reduce the
difficulty of renumbering OID assignments in uncommitted patches.
Also, solve the longstanding problem that frontend code that would like to
use OID macros and other information from the catalog headers often had
difficulty with backend-only code in the headers. To do this, arrange for
all generated macros, plus such other declarations as we deem fit, to be
placed in "derived" header files that are safe for frontend inclusion.
(Once clients migrate to using these pg_*_d.h headers, it will be possible
to get rid of the pg_*_fn.h headers, which only exist to quarantine code
away from clients. That is left for follow-on patches, however.)
The now-automatically-generated macros include the Anum_xxx and Natts_xxx
constants that we used to have to update by hand when adding or removing
catalog columns.
Replace the former manual method of generating OID macros for pg_type
entries with an automatic method, ensuring that all built-in types have
OID macros. (But note that this patch does not change the way that
OID macros for pg_proc entries are built and used. It's not clear that
making that match the other catalogs would be worth extra code churn.)
Add SGML documentation explaining what the new data format is and how to
work with it.
Despite being a very large change in the catalog headers, there is no
catversion bump here, because postgres.bki and related output files
haven't changed at all.
John Naylor, based on ideas from various people; review and minor
additional coding by me; previous review by Alvaro Herrera
Andrew Gierth [Sun, 8 Apr 2018 05:35:42 +0000 (06:35 +0100)]
Attempt to stabilize partition_prune test output.
Disable index-only scan for tests that might report variable results
for "Heap Fetches" statistic due to concurrent transactions affecting
whether all-visible flags can be set.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f_yjtHDJnDzx1uuR_3D7beDVAkNQfWJhRLA1gvPCzkAhg@mail.gmail.com
Andrew Gierth [Sun, 8 Apr 2018 05:02:05 +0000 (06:02 +0100)]
Support index INCLUDE in the AM properties interface.
This rectifies an oversight in commit 8224de4f4, by adding a new
property 'can_include' for pg_indexam_has_property, and adjusting the
results of pg_index_column_has_property to give more appropriate
results for INCLUDEd columns.
Andres Freund [Sun, 8 Apr 2018 01:27:14 +0000 (18:27 -0700)]
Remove overzeleous assertions in pg_atomic_flag code.
The atomics code asserts proper alignment in various places. That's
mainly because the alignment of 64bit integers is not sufficient for
atomic operations on all platforms. Some ABIs only have four byte
alignment, but don't have atomic behavior when crossing page
boundaries.
The flags code isn't affected by that however, as the type alignment
always is sufficient for atomic operations. Nevertheless the code
asserted alignment requirements. Before 8c3debbb it was only broken on
hppa, after it probably affect further platforms.
Thus remove the assertions for pg_atomic_flag operators.
Stephen Frost [Sat, 7 Apr 2018 23:01:43 +0000 (19:01 -0400)]
Fix EXEC BACKEND + Windows builds for group privs
Under EXEC BACKEND we also need to be going through the group privileges
setup since we do support that on Unixy systems, so add that to
SubPostmasterMain().
Under Windows, we need to simply return true from
GetDataDirectoryCreatePerm(), but that wasn't happening due to a missing
#else clause.
Stephen Frost [Sat, 7 Apr 2018 21:45:39 +0000 (17:45 -0400)]
Allow group access on PGDATA
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net> Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Stephen Frost [Sat, 7 Apr 2018 21:45:39 +0000 (17:45 -0400)]
Refactor dir/file permissions
Consolidate directory and file create permissions for tools which work
with the PG data directory by adding a new module (common/file_perm.c)
that contains variables (pg_file_create_mode, pg_dir_create_mode) and
constants to initialize them (0600 for files and 0700 for directories).
Convert mkdir() calls in the backend to MakePGDirectory() if the
original call used default permissions (always the case for regular PG
directories).
Add tests to make sure permissions in PGDATA are set correctly by the
tools which modify the PG data directory.
Authors: David Steele <david@pgmasters.net>,
Adam Brightwell <adam.brightwell@crunchydata.com> Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
Existing partition pruning is only able to work at plan time, for query
quals that appear in the parsed query. This is good but limiting, as
there can be parameters that appear later that can be usefully used to
further prune partitions.
This commit adds support for pruning subnodes of Append which cannot
possibly contain any matching tuples, during execution, by evaluating
Params to determine the minimum set of subnodes that can possibly match.
We support more than just simple Params in WHERE clauses. Support
additionally includes:
1. Parameterized Nested Loop Joins: The parameter from the outer side of the
join can be used to determine the minimum set of inner side partitions to
scan.
2. Initplans: Once an initplan has been executed we can then determine which
partitions match the value from the initplan.
Partition pruning is performed in two ways. When Params external to the plan
are found to match the partition key we attempt to prune away unneeded Append
subplans during the initialization of the executor. This allows us to bypass
the initialization of non-matching subplans meaning they won't appear in the
EXPLAIN or EXPLAIN ANALYZE output.
For parameters whose value is only known during the actual execution
then the pruning of these subplans must wait. Subplans which are
eliminated during this stage of pruning are still visible in the EXPLAIN
output. In order to determine if pruning has actually taken place, the
EXPLAIN ANALYZE must be viewed. If a certain Append subplan was never
executed due to the elimination of the partition then the execution
timing area will state "(never executed)". Whereas, if, for example in
the case of parameterized nested loops, the number of loops stated in
the EXPLAIN ANALYZE output for certain subplans may appear lower than
others due to the subplan having been scanned fewer times. This is due
to the list of matching subnodes having to be evaluated whenever a
parameter which was found to match the partition key changes.
This commit required some additional infrastructure that permits the
building of a data structure which is able to perform the translation of
the matching partition IDs, as returned by get_matching_partitions, into
the list index of a subpaths list, as exist in node types such as
Append, MergeAppend and ModifyTable. This allows us to translate a list
of clauses into a Bitmapset of all the subpath indexes which must be
included to satisfy the clause list.
Author: David Rowley, based on an earlier effort by Beena Emerson
Reviewers: Amit Langote, Robert Haas, Amul Sul, Rajkumar Raghuwanshi,
Jesper Pedersen
Discussion: https://postgr.es/m/CAOG9ApE16ac-_VVZVvv0gePSgkg_BwYEV1NBqZFqDR2bBE0X0A@mail.gmail.com
This works very much like the existing bms_last_member function, only it
traverses through the Bitmapset in the opposite direction from the most
significant bit down to the least significant bit. A special prevbit value of
-1 may be used to have the function determine the most significant bit. This
is useful for starting a loop. When there are no members less than prevbit,
the function returns -2 to indicate there are no more members.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-K=3d5MDASNYFJpUpc20xcBnAwNC1-AOeunhn0OtkWbQ@mail.gmail.com
Andres Freund [Sat, 7 Apr 2018 20:24:10 +0000 (13:24 -0700)]
Raise error when affecting tuple moved into different partition.
When an update moves a row between partitions (supported since 2f178441044b), our normal logic for following update chains in READ
COMMITTED mode doesn't work anymore. Cross partition updates are
modeled as an delete from the old and insert into the new
partition. No ctid chain exists across partitions, and there's no
convenient space to introduce that link.
Not throwing an error in a partitioned context when one would have
been thrown without partitioning is obviously problematic. This commit
introduces infrastructure to detect when a tuple has been moved, not
just plainly deleted. That allows to throw an error when encountering
a deletion that's actually a move, while attempting to following a
ctid chain.
The row deleted as part of a cross partition update is marked by
pointing it's t_ctid to an invalid block, instead of self as a normal
update would. That was deemed to be the least invasive and most
future proof way to represent the knowledge, given how few infomask
bits are there to be recycled (there's also some locking issues with
using infomask bits).
External code following ctid chains should be updated to check for
moved tuples. The most likely consequence of not doing so is a missed
error.
Author: Amul Sul, editorialized by me Reviewed-By: Amit Kapila, Pavan Deolasee, Andres Freund, Robert Haas
Discussion: http://postgr.es/m/CAAJ_b95PkwojoYfz0bzXU8OokcTVGzN6vYGCNVUukeUDrnF3dw@mail.gmail.com
Indexes with INCLUDE columns and their support in B-tree
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
Jsonb has a complex nature so there isn't best-for-everything way to convert it
to tsvector for full text search. Current to_tsvector(json(b)) suggests to
convert only string values, but it's possible to index keys, numerics and even
booleans value. To solve that json(b)_to_tsvector has a second required
argument contained a list of desired types of json fields. Second argument is
a jsonb scalar or array right now with possibility to add new options in a
future.
Bump catalog version
Author: Dmitry Dolgov with some editorization by me
Reviewed by: Teodor Sigaev
Discussion: https://www.postgresql.org/message-id/CA+q6zcXJQbS1b4kJ_HeAOoOc=unfnOrUEL=KGgE32QKDww7d8g@mail.gmail.com
Fix timing issue in new subscription truncate test
We need to wait for the initial sync of all subscriptions. On
some (faster?) machines, this didn't make a difference, but
the (slower?) buildfarm machines are upset.
Update the built-in logical replication system to make use of the
previously added logical decoding for TRUNCATE support. Add the
required truncate callback to pgoutput and a new logical replication
protocol message.
Publications get a new attribute to determine whether to replicate
truncate actions. When updating a publication via pg_dump from an older
version, this is not set, thus preserving the previous behavior.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reviewed-by: Andres Freund <andres@anarazel.de> Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Add a new WAL record type for TRUNCATE, which is only used when
wal_level >= logical. (For physical replication, TRUNCATE is already
replicated via SMGR records.) Add new callback for logical decoding
output plugins to receive TRUNCATE actions.
Author: Simon Riggs <simon@2ndquadrant.com>
Author: Marco Nenciarini <marco.nenciarini@2ndquadrant.it>
Author: Peter Eisentraut <peter.eisentraut@2ndquadrant.com> Reviewed-by: Petr Jelinek <petr.jelinek@2ndquadrant.com> Reviewed-by: Andres Freund <andres@anarazel.de> Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Hash index searches acquire predicate locks on the primary
page of a bucket. It acquires a lock on both the old and new buckets
for scans that happen concurrently with page splits. During a bucket
split, a predicate lock is copied from the primary page of an old
bucket to the primary page of a new bucket.
Author: Shubham Barai, Amit Kapila
Reviewed by: Amit Kapila, Alexander Korotkov, Thomas Munro
Discussion: https://www.postgresql.org/message-id/flat/CALxAEPvNsM2GTiXdRgaaZ1Pjd1bs+sxfFsf7Ytr+iq+5JJoYXA@mail.gmail.com
Author: Amit Langote Reviewed-by: Álvaro Herrera, David Rowley
Discussion: https://postgr.es/m/CA+HiwqGzq4D6z=8R0AP+XhbTFCQ-4Ct+t2ekqjE9Fpm84_JUGg@mail.gmail.com
Andres Freund [Sat, 7 Apr 2018 03:17:50 +0000 (20:17 -0700)]
Attempt to fix endianess issues in new hash partition test.
The tests added as part of 9fdb675fc5 yield differing results
depending on endianess, causing buildfarm failures. As the differences
are expected, split the hash partitioning tests into a different file
and maintain alternative output. The separate file is so the amount of
duplicated output is reduced.
David produced the alternative output without a machine to test on, so
it's possible this'll require a buildfarm cycle or two to get right.
Author: David Rowley
Discussion: https://postgr.es/m/CAKJS1f-6f4c2Qhuipe-GY7BKmFd0FMBobRnLS7hVCoAmTszsBg@mail.gmail.com
Andres Freund [Sat, 7 Apr 2018 02:55:32 +0000 (19:55 -0700)]
Fix and improve pg_atomic_flag fallback implementation.
The atomics fallback implementation for pg_atomic_flag was broken,
returning the inverted value from pg_atomic_test_set_flag(). This was
unnoticed because a) atomic flags were unused until recently b) the
test code wasn't run when the fallback implementation was in
use (because it didn't allow to test for some edge cases).
Fix the bug, and improve the fallback so it has the same behaviour as
the non-fallback implementation in the problematic edge cases. That
breaks ABI compatibility in the back branches when fallbacks are in
use, but given they were broken until now...
Author: Andres Freund Reported-by: Daniel Gustafsson
Discussion:
https://postgr.es/m/FB948276-7B32-4B77-83E6-D00167F8EEB4@yesql.se
https://postgr.es/m/20180406233854.uni2h3mbnveczl32@alap3.anarazel.de
Backpatch: 9.5-, where the atomics abstraction was introduced.
Robert Haas [Fri, 6 Apr 2018 23:16:11 +0000 (19:16 -0400)]
Allow insert and update tuple routing and COPY for foreign tables.
Also enable this for postgres_fdw.
Etsuro Fujita, based on an earlier patch by Amit Langote. The larger
patch series of which this is a part has been reviewed by Amit
Langote, David Fetter, Maksim Milyutin, Álvaro Herrera, Stephen Frost,
and me. Minor documentation changes to the final version by me.
projects / postgresql / log