Junio C Hamano [Mon, 21 Jul 2014 18:17:47 +0000 (11:17 -0700)]
Merge branch 'ak/profile-feedback-build'
* ak/profile-feedback-build:
Fix profile feedback with -jN and add profile-fast
Run the perf test suite for profile feedback too
Don't define away __attribute__ on gcc
Use BASIC_FLAGS for profile feedback
Stefan Beller [Thu, 10 Jul 2014 12:48:26 +0000 (14:48 +0200)]
.mailmap: map different names with the same email address together
Pretty much one year ago (94b410bba864, Jul 12 2013, .mailmap: Map
email addresses to names) I cleaned up the output of `git shortlog
-sne` of git.git by writing a .mailmap file fot the git.git project.
During the year Jens, Kazuki and Trần contributed to git.git using
different names, but the same email address; unify them.
Signed-off-by: Stefan Beller <stefanbeller@googlemail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 16 Jul 2014 18:33:09 +0000 (11:33 -0700)]
Merge branch 'rs/code-cleaning'
* rs/code-cleaning:
fsck: simplify fsck_commit_buffer() by using commit_list_count()
commit: use commit_list_append() instead of duplicating its code
merge: simplify merge_trivial() by using commit_list_append()
use strbuf_addch for adding single characters
use strbuf_addbuf for adding strbufs
Junio C Hamano [Wed, 16 Jul 2014 18:33:01 +0000 (11:33 -0700)]
Merge branch 'jl/test-lint-scripts'
* jl/test-lint-scripts:
t/Makefile: always test all lint targets when running tests
t/Makefile: check helper scripts for non-portable shell commands too
"filter-branch" left an empty single-parent commit that results when
all parents of a merge commit gets mapped to the same commit, even
under "--prune-empty".
Junio C Hamano [Wed, 16 Jul 2014 18:26:04 +0000 (11:26 -0700)]
Merge branch 'mk/merge-incomplete-files'
Merging changes into a file that ends in an incomplete line made the
last line into a complete one, even when the other branch did not
change anything around the end of file.
* mk/merge-incomplete-files:
git-merge-file: do not add LF at EOF while applying unrelated change
t6023-merge-file.sh: fix and mark as broken invalid tests
Junio C Hamano [Wed, 16 Jul 2014 18:25:59 +0000 (11:25 -0700)]
Merge branch 'jk/strip-suffix'
* jk/strip-suffix:
prepare_packed_git_one: refactor duplicate-pack check
verify-pack: use strbuf_strip_suffix
strbuf: implement strbuf_strip_suffix
index-pack: use strip_suffix to avoid magic numbers
use strip_suffix instead of ends_with in simple cases
replace has_extension with ends_with
implement ends_with via strip_suffix
add strip_suffix function
sha1_file: replace PATH_MAX buffer with strbuf in prepare_packed_git_one()
Junio C Hamano [Wed, 16 Jul 2014 18:25:47 +0000 (11:25 -0700)]
Merge branch 'cc/replace-edit'
Teach "git replace" an "--edit" mode.
* cc/replace-edit:
replace: use argv_array in export_object
avoid double close of descriptors handed to run_command
replace: replace spaces with tabs in indentation
Junio C Hamano [Wed, 16 Jul 2014 18:25:40 +0000 (11:25 -0700)]
Merge branch 'nd/split-index'
An experiment to use two files (the base file and incremental
changes relative to it) to represent the index to reduce I/O cost
of rewriting a large index when only small part of the working tree
changes.
* nd/split-index: (32 commits)
t1700: new tests for split-index mode
t2104: make sure split index mode is off for the version test
read-cache: force split index mode with GIT_TEST_SPLIT_INDEX
read-tree: note about dropping split-index mode or index version
read-tree: force split-index mode off on --index-output
rev-parse: add --shared-index-path to get shared index path
update-index --split-index: do not split if $GIT_DIR is read only
update-index: new options to enable/disable split index mode
split-index: strip pathname of on-disk replaced entries
split-index: do not invalidate cache-tree at read time
split-index: the reading part
split-index: the writing part
read-cache: mark updated entries for split index
read-cache: save deleted entries in split index
read-cache: mark new entries for split index
read-cache: split-index mode
read-cache: save index SHA-1 after reading
entry.c: update cache_changed if refresh_cache is set in checkout_entry()
cache-tree: mark istate->cache_changed on prime_cache_tree()
cache-tree: mark istate->cache_changed on cache tree update
...
Junio C Hamano [Wed, 16 Jul 2014 18:17:36 +0000 (11:17 -0700)]
Merge branch 'jc/fix-clone-single-starting-at-a-tag' into maint
"git clone -b brefs/tags/bar" would have mistakenly thought we were
following a single tag, even though it was a name of the branch,
because it incorrectly used strstr().
* jc/fix-clone-single-starting-at-a-tag:
builtin/clone.c: detect a clone starting at a tag correctly
Junio C Hamano [Wed, 16 Jul 2014 18:17:21 +0000 (11:17 -0700)]
Merge branch 'jk/pretty-G-format-fixes' into maint
"%G" (nothing after G) is an invalid pretty format specifier, but
the parser did not notice it as garbage.
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
Junio C Hamano [Wed, 16 Jul 2014 18:16:38 +0000 (11:16 -0700)]
Merge branch 'jk/commit-buffer-length' into maint
A handful of code paths had to read the commit object more than
once when showing header fields that are usually not parsed. The
internal data structure to keep track of the contents of the commit
object has been updated to reduce the need for this double-reading,
and to allow the caller find the length of the object.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
Junio C Hamano [Wed, 16 Jul 2014 18:10:30 +0000 (11:10 -0700)]
Merge branch 'maint-1.8.5' into maint-1.9
* maint-1.8.5:
annotate: use argv_array
t7300: repair filesystem permissions with test_when_finished
enums: remove trailing ',' after last item in enum
René Scharfe [Wed, 16 Jul 2014 08:51:33 +0000 (10:51 +0200)]
annotate: use argv_array
Simplify the code and get rid of some magic constants by using
argv_array to build the argument list for cmd_blame. Be lazy and let
the OS release our allocated memory, as before.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
.gitignore: "git-verify-commit" is a generated file
builtin/verify-commit.c was added in commit d07b00b ("verify-commit:
scriptable commit signature verification", 2014-06-23), update
.gitignore to ignore the generated file.
Signed-off-by: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Thu, 19 Jun 2014 20:12:56 +0000 (22:12 +0200)]
revert: add t3513 for submodule updates
Test that the revert command updates the work tree as expected (for
submodule changes which don't result in conflicts). Add a helper function
to first revert the checked out target commit to make the last revert
produce the to-be-tested work tree.
Set the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT and
KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR switches to
document that revert has the similar failures.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Thu, 19 Jun 2014 20:12:54 +0000 (22:12 +0200)]
stash: add t3906 for submodule updates
Test that the stash apply command updates the work tree as expected for
changes which don't result in conflicts. To make that work add a helper
function that uses read-tree to apply the changes of the target commit
to the work tree, then stashes these changes and at last applies that
stash.
Implement the KNOWN_FAILURE_STASH_DOES_IGNORE_SUBMODULE_CHANGES switch
and reuse two other already present switches to expect the known
failure that stash does ignore submodule changes.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 17:03:53 +0000 (19:03 +0200)]
am: add t4255 for submodule updates
Test that the am command updates the work tree as expected (for submodule
changes which don't result in conflicts). To make that work add two
helper functions that use format-patch to create the input for am.
Add the KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch to expect the known failure that --no-ff merges attempt to merge
the new files in the former submodule directory with those of the removed
submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 17:03:18 +0000 (19:03 +0200)]
cherry-pick: add t3512 for submodule updates
Test that the cherry-pick command updates the work tree as expected (for
submodule changes which don't result in conflicts).
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that cherry-pick has the same --no-ff known failures merge has.
Implement the KNOWN_FAILURE_CHERRY_PICK_SEES_EMPTY_COMMIT switch to expect
the known failure that while cherry picking just a SHA-1 update for an
ignored submodule the commit incorrectly fails with "The previous
cherry-pick is now empty, possibly due to conflict resolution.".
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 17:02:47 +0000 (19:02 +0200)]
pull: add t5572 for submodule updates
Test that the pull command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag each. Add
helper functions to reset the branch to be updated to to the current
HEAD so that pull is doing the transition from HEAD to the given branch.
Set KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
and KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that pull has the same --no-ff known failures merge has.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Thu, 19 Jun 2014 20:12:51 +0000 (22:12 +0200)]
rebase: add t3426 for submodule updates
Test that the rebase command updates the work tree as expected for
changes which don't result in conflicts. To make that work add two
helper functions that add a commit only touching files and then
revert it. This allows to rebase the target commit over these two
and to compare the result.
Set KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR to
document that "replace directory with submodule" fails for an
interactive rebase because a directory "sub1" already exists.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 17:01:41 +0000 (19:01 +0200)]
merge: add t7613 for submodule updates
Test that the merge command updates the work tree as expected (for
submodule changes which don't result in conflicts) when used without
arguments or with the '--ff', '--ff-only' and '--no-ff' flag.
Implement the KNOWN_FAILURE_NOFF_MERGE_DOESNT_CREATE_EMPTY_SUBMODULE_DIR
switch to expect the known failure that --no-ff merges do not create the
empty submodule directory.
The KNOWN_FAILURE_NOFF_MERGE_ATTEMPTS_TO_MERGE_REMOVED_SUBMODULE_FILES
switch is also implemented to expect the known failure that --no-ff
merges attempt to merge the new files in the former submodule directory
with those of the removed submodule.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Thu, 19 Jun 2014 20:12:48 +0000 (22:12 +0200)]
bisect: add t6041 for submodule updates
Test that the bisect command updates the work tree as expected. To make
that work with the new submodule test framework a git_bisect helper
function is added. This adds a commit after the one given to be switched
to and makes that one the bad commit. The starting point is then given to
bisect as the good commit which makes bisect change the work tree to the
commit in between, which is the commit given.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 17:00:28 +0000 (19:00 +0200)]
reset: add t7112 for submodule updates
Test that the reset command updates the work tree as expected for changes
with '--keep', '--merge' (for changes which don't result in conflicts) and
'--hard'.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jens Lehmann [Sun, 15 Jun 2014 16:59:20 +0000 (18:59 +0200)]
apply: add t4137 for submodule updates
Test that the apply command updates the work tree as expected for the
'--index' and the '--3way' options (for submodule changes which don't
result in conflicts).
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
submodules: add the lib-submodule-update.sh test library
Add this test library to simplify covering all combinations of submodule
update scenarios without having to add those to a test of each work tree
manipulating command over and over again.
The functions test_submodule_switch() and test_submodule_forced_switch()
are intended to be called from a test script with a single argument. This
argument is either a work tree manipulating command (including any command
line options) or a function (when more than a single git command is needed
to switch work trees from the current HEAD to another commit). This
command (or function) is passed a target branch as argument. The two new
functions check that each submodule transition is handled as expected,
which currently means that submodule work trees are not affected until
"git submodule update" is called. The "forced" variant is for commands
using their '-f' or '--hard' option and expects them to overwrite local
modifications as a result. Each of these two functions contains 14
tests_expect_* calls.
Calling one of these test functions the first time creates a repository
named "submodule_update_repo". At first it contains two files, then a
single submodule is added in another commit followed by commits covering
all relevant submodule modifications. This repository is newly cloned into
the "submodule_update" for each test_expect_* to avoid interference
between different parts of the test functions (some to-be-tested commands
also manipulate refs along with the work tree, e.g. "git reset").
Follow-up commits will then call these two test functions for all work
tree manipulating commands (with a combination of all their options
relevant to what they do with the work tree) making sure they work as
expected. Later this test library will be extended to cover merges
resulting in conflicts too. Also it is intended to be easily extendable
for the recursive update functionality, where even more combinations of
submodule modifications have to be tested for.
This version documents two bugs in current Git with expected failures:
*) When a submodule is replaced with a tracked file of the same name the
submodule work tree including any local modifications (and even the
whole history if it uses a .git directory instead of a gitfile!) is
silently removed.
*) Forced work tree updates happily manipulate files in the directory of a
submodule that has just been removed in the superproject (but is of
course still present in the work tree due to the way submodules are
currently handled). This becomes dangerous when files in the submodule
directory are overwritten by files from the new superproject commit, as
any modifications to the submodule files will be lost) and is expected
to also destroy history in the - admittedly unlikely case - the new
commit adds a file named ".git" to the submodule directory.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
http-push.c: make CURLOPT_IOCTLDATA a usable pointer
Fixes a small bug affecting push to remotes which use some sort of
multi-pass authentication. In particular the bug affected SabreDAV as
configured by Box.com [1].
It must be a weird server configuration for the bug to have survived
this long. Someone should write a test for it.
René Scharfe [Thu, 10 Jul 2014 09:48:26 +0000 (11:48 +0200)]
fsck: simplify fsck_commit_buffer() by using commit_list_count()
fsck_commit_buffer() checks that the number of items in the parents
list of a commit matches the number of parent lines in its buffer or --
if a graft is used -- the number of parents in that graft. Simplify
the code by using commit_list_count() instead of counting by hand.
Also use different variables for the number of lines and the number of
list items, making it easier to compare them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Thu, 10 Jul 2014 09:41:40 +0000 (11:41 +0200)]
merge: simplify merge_trivial() by using commit_list_append()
Build the commit_list of parents by calling commit_list_append() twice
instead of allocating and linking the items by hand. This makes the
code shorter and simpler. Rename the commit_list from parent to parents
(plural) while at it because there are two of them.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/Makefile: always test all lint targets when running tests
Only the two targets "test-lint-duplicates" and "test-lint-executable" are
currently executed when running the test target. This was done on purpose
when the TEST_LINT variable was added in 81127d74 to avoid twisted shell
scripting by developers only to avoid false positives that might result
from the rather simple minded tests, e.g. test-lint-shell-syntax. But it
looks like it might be better to include all lint tests to help developers
to detect non portable shell constructs before the patch is sent to the
list and reviewed there.
Change the TEST_LINT variable to run all lint test unless the TEST_LINT
variable is overridden. If we hit false positives more often than helping
developers to avoid non-portable code (or add less accurate or slow tests
later) we could still fall back to exclude them like 81127d74 proposed.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t/Makefile: check helper scripts for non-portable shell commands too
Currently only the "t[0-9][0-9][0-9][0-9]-*.sh" scripts are tested for
shell incompatibilities using the check-non-portable-shell.pl script. This
makes it easy to miss non-POSIX constructs added to one of the t/*lib*.sh
helper scripts, as they aren't automatically detected.
Fix that by adding a THELPERS variable containing all shell scripts that
aren't tests and add these to the "test-lint-shell-syntax" target too.
Signed-off-by: Jens Lehmann <Jens.Lehmann@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 10 Jul 2014 18:27:33 +0000 (11:27 -0700)]
Merge branch 'mg/verify-commit'
Add 'verify-commit' to be used in a way similar to 'verify-tag' is
used. Further work on verifying the mergetags might be needed.
* mg/verify-commit:
t7510: test verify-commit
t7510: exit for loop with test result
verify-commit: scriptable commit signature verification
gpg-interface: provide access to the payload
gpg-interface: provide clear helper for struct signature_check
"git clone -b brefs/tags/bar" would have mistakenly thought we were
following a single tag, even though it was a name of the branch,
because it incorrectly used strstr().
* jc/fix-clone-single-starting-at-a-tag:
builtin/clone.c: detect a clone starting at a tag correctly
Junio C Hamano [Thu, 10 Jul 2014 18:10:05 +0000 (11:10 -0700)]
Merge branch 'jk/repack-pack-keep-objects' into maint
* jk/repack-pack-keep-objects:
repack: s/write_bitmap/&s/ in code
repack: respect pack.writebitmaps
repack: do not accidentally pack kept objects by default
Junio C Hamano [Wed, 9 Jul 2014 18:34:13 +0000 (11:34 -0700)]
Merge branch 'jk/pretty-G-format-fixes'
* jk/pretty-G-format-fixes:
move "%G" format test from t7510 to t6006
pretty: avoid reading past end-of-string with "%G"
t7510: check %G* pretty-format output
t7510: test a commit signed by an unknown key
t7510: use consistent &&-chains in loop
t7510: stop referring to master in later tests
Junio C Hamano [Wed, 9 Jul 2014 18:34:05 +0000 (11:34 -0700)]
Merge branch 'jk/xstrfmt'
* jk/xstrfmt:
setup_git_env(): introduce git_path_from_env() helper
unique_path: fix unlikely heap overflow
walker_fetch: fix minor memory leak
merge: use argv_array when spawning merge strategy
sequencer: use argv_array_pushf
setup_git_env: use git_pathdup instead of xmalloc + sprintf
use xstrfmt to replace xmalloc + strcpy/strcat
use xstrfmt to replace xmalloc + sprintf
use xstrdup instead of xmalloc + strcpy
use xstrfmt in favor of manual size calculations
strbuf: add xstrfmt helper
Junio C Hamano [Wed, 9 Jul 2014 18:33:27 +0000 (11:33 -0700)]
Merge branch 'jk/skip-prefix'
* jk/skip-prefix:
http-push: refactor parsing of remote object names
imap-send: use skip_prefix instead of using magic numbers
use skip_prefix to avoid repeated calculations
git: avoid magic number with skip_prefix
fetch-pack: refactor parsing in get_ack
fast-import: refactor parsing of spaces
stat_opt: check extra strlen call
daemon: use skip_prefix to avoid magic numbers
fast-import: use skip_prefix for parsing input
use skip_prefix to avoid repeating strings
use skip_prefix to avoid magic numbers
transport-helper: avoid reading past end-of-string
fast-import: fix read of uninitialized argv memory
apply: use skip_prefix instead of raw addition
refactor skip_prefix to return a boolean
avoid using skip_prefix as a boolean
daemon: mark some strings as const
parse_diff_color_slot: drop ofs parameter
The git log --graph --show-signature command incorrectly indents the gpg
information about signed commits and merged signed tags. It does not
follow the level of indentation of the current commit.
Example of garbled output:
$ git log --show-signature --graph
* commit 258e0a237cb69aaa587b0a4fb528bb0316b1b776
|\ gpg: Signature made Mon, Jun 30, 2014 13:22:33 EDT using RSA key ID DA08
gpg: Good signature from "Jason Pyeron <jpye...@pdinc.us>"
Merge: 727c3551ca13ed
| | Author: Jason Pyeron <jpye...@pdinc.us>
| | Date: Mon Jun 30 13:22:29 2014 -0400
| |
| | Merge of 1ca13ed2271d60ba9 branch - rebranding
| |
| * commit 1ca13ed2271d60ba93d40bcc8db17ced8545f172
| | gpg: Signature made Mon, Jun 23, 2014 9:45:47 EDT using RSA key ID DD37
gpg: Good signature from "Stephen Robert Guglielmo <s...@guglielmo.us>"
gpg: aka "Stephen Robert Guglielmo <srguglie...@gmail.com>"
Author: Stephen R Guglielmo <s...@guglielmo.us>
| | Date: Mon Jun 23 09:45:27 2014 -0400
| |
| | Minor URL updates
In log-tree.c modify show_sig_lines() function to call graph_show_oneline()
after each line of gpg information it has printed in order to preserve
the level of indentation for the next output line.
Reported-by: Jason Pyeron <jpyeron@pdinc.us> Signed-off-by: Zoltan Klinger <zoltan.klinger@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Turner [Fri, 4 Jul 2014 20:24:01 +0000 (13:24 -0700)]
refs: fix valgrind suppression file
Add all of the ways in which check_refname_format violates valgrind's
expectations to the valgrind suppression file; remove an assumption about
the call chain of check_refname_format from same.
Signed-off-by: David Turner <dturner@twitter.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t0027: combinations of core.autocrlf, core.eol and text
Historically there are 3 different parameters controlling how line endings
are handled by Git:
- core.autocrlf
- core.eol
- the "text" attribute in .gitattributes
There are different types of content:
- (1) Files with only LF
- (2) Files with only CRLF
- (3) Files with mixed LF and CRLF
- (4) Files with LF and/or CRLF with CR not followed by LF
- (5) Files which are binary (e.g. have NUL bytes)
Recently the question came up, how files with mixed EOLs are handled by Git
(and libgit2) when they are checked out and core.autocrlf=true.
See
http://git.661346.n2.nabble.com/The-different-EOL-behavior-between-libgit2-based-software-and-official-Git-td7613670.html#a7613801
Add the EXPENSIVE t0027-auto-crlf.sh to test all combination of files
and parameters for both "git add/commit" and "git checkout".
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
The current test files are named one, two and three.
Make it clearer what the tests do and rename them into
LFonly, CRLFonly and LFwithNUL.
After the renaming we can see easier that we may want more test cases
for 2 types of files:
- files which have mixed LF and CRLF line endings,
- files which have mixed LF and CR line endings.
See commit fd6cce9e, "Add per-repository eol normalization" and
"the new safer autocrlf handling" in convert.c
Signed-off-by: Torsten Bögershausen <tboegi@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Fix profile feedback with -jN and add profile-fast
Profile feedback always failed for me with -jN. The problem
was that there was no implicit ordering between the profile generate
stage and the profile use stage. So some objects in the later stage
would be linked with profile generate objects, and fail due
to the missing -lgcov.
This adds a new profile target that implicitely enforces the
correct ordering by using submakes. Plus a profile-install target
to also install. This is also nicer to type that PROFILE=...
Plus I always run the performance test suite now for the full
profile run.
In addition I also added a profile-fast / profile-fast-install
target the only runs the performance test suite instead of the
whole test suite. This significantly speeds up the profile build,
which was totally dominated by test suite run time. However
it may have less coverage of course.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
In the same way as there is for_each_ref() to iterate on refs,
for_each_mergetag() allows the caller to iterate on the mergetags of
a given commit. Use it to rewrite show_mergetag() used in "git log".
Signed-off-by: Christian Couder <chriscool@tuxfamily.org> Signed-off-by: Junio C Hamano <gitster@pobox.com>
René Scharfe [Sat, 5 Jul 2014 19:35:01 +0000 (21:35 +0200)]
t5000, t5003: simplify commit
Add the whole directory of test files at once using git add instead of
calling git update-index on each of them and use git commit instead of
the plumbing commands write-tree, update-ref and commit-tree to build
the commit. This simplifies the code considerably.
Signed-off-by: Rene Scharfe <l.s.r@web.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Profile feedback sets -DNO_NORETURN, which causes the compat
header file to go into a default #else block. That #else
block defines away __attribute__(). Doing so causes all
kinds of problems with the Linux and gcc system headers:
in particular it makes the xmmintrin.h headers error out,
breaking the build.
Don't define away __attribute__ when __GNUC__ is set.
Signed-off-by: Andi Kleen <ak@linux.intel.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
'git checkout' fails if a directory is longer than PATH_MAX, because the
lstat_cache in symlinks.c checks if the leading directory exists using
PATH_MAX-bounded string operations.
Remove the limitation by using strbuf instead.
Signed-off-by: Karsten Blees <blees@dcon.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
David Turner [Sat, 5 Jul 2014 19:00:59 +0000 (12:00 -0700)]
refs.c: handle REFNAME_REFSPEC_PATTERN at end of page
When a ref crosses a memory page boundary, we restart the parsing
at the beginning with the bytewise code. Pass the original flags
to that code, rather than the current flags.
Reported-By: Øyvind A. Holm <sunny@sunbase.org> Signed-off-by: David Turner <dturner@twitter.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Wed, 2 Jul 2014 19:53:02 +0000 (12:53 -0700)]
Merge branch 'jk/commit-buffer-length'
Move "commit->buffer" out of the in-core commit object and keep
track of their lengths. Use this to optimize the code paths to
validate GPG signatures in commit objects.
* jk/commit-buffer-length:
reuse cached commit buffer when parsing signatures
commit: record buffer length in cache
commit: convert commit->buffer to a slab
commit-slab: provide a static initializer
use get_commit_buffer everywhere
convert logmsg_reencode to get_commit_buffer
use get_commit_buffer to avoid duplicate code
use get_cached_commit_buffer where appropriate
provide helpers to access the commit buffer
provide a helper to set the commit buffer
provide a helper to free commit buffer
sequencer: use logmsg_reencode in get_message
logmsg_reencode: return const buffer
do not create "struct commit" with xcalloc
commit: push commit_index update into alloc_commit_node
alloc: include any-object allocations in alloc_report
replace dangerous uses of strbuf_attach
commit_tree: take a pointer/len pair rather than a const strbuf
projects / git / log