Liu Zhi Fu [Mon, 17 Dec 2018 12:39:54 +0000 (20:39 +0800)]
esp32: fix WiFi stop bug in WiFi/BT coexist mode
This fix includes following changes:
1. Fix the bug that esp_restart()/esp_wifi_stop() sometimes fails in WiFi/BT coexist mode.
2. Add a timer for WiFi stop and stop WiFi forcibly once the timer expires.
spi: fix the crash when callbacks are not in the IRAM
Introduced in 9c23b8e5 and 4f87a62f. To get higher speed, menuconfig
options are added to put ISR and other functions into the IRAM. The
interrupt flag ESP_INTR_FLAG_IRAM is also mistakenly set when the ISR is
put into the IRAM. However callbacks, which are wrote by the user, are
called in the master and slave ISR. The user may not be aware of that
these callbacks are not disabled during flash operations. Any cache miss
during flash operation will cause panic.
Essentially IRAM functions and intrrupt flag ESP_INTR_FLAG_IRAM are
different, the latter means not disabling the ISR during flash
operations. New bus_config flag intr_flags is offered to help set the
interrupt attribute, including priority level, SHARED, IRAM (not
disabled during flash operations). It introduced a small BREAK to
IDFv3.1 (but the same as IDFv3.0) that the user has to manually set IRAM
flag now (therefore he's aware of the IRAM thing) to void the ISR being
disabled during flash operations.
Tian Hao [Sat, 1 Dec 2018 10:10:19 +0000 (18:10 +0800)]
component/bt and esp32: fix two bluetooth bugs that caused by coexist module
1. Fix interrupt watchdog timeout in bluetooth "btdm_bb_isr"
2. Fix BLE assert(512) or assert(1536) in rwble.c at line 222
3. Update librtc.a to fix BLE assert(512) in rwble.c at line 222
The #1 and #2 occurs random.
The #3 bug occurs in certain scenario:
1. If Wifi start softap and BLE is working
2. If wifi start station, but do not use normal station operation, such
as just use espnow, while BLE is working
3. Any other scenario, that wifi works without use software coexist
operation, while BLE is working(such as do advertising and ...)
He Yin Ling [Mon, 26 Nov 2018 08:40:32 +0000 (16:40 +0800)]
ci: combine unit_test and integration_test stage:
The number of runners of integration test is not bottleneck to CI
pipeline performance now. Combine these 2 stages will make integration
test executed even unit test fails. This could help us to collect more
info about test history.
1. replace xunitgen with junit_xml, which can log more info
2. allow test cases to handle junit test report by them own
3. allow test cases to log some info into report via `sysout` tag
This commit resolves a blocking in esp_aes_block function.
Introduce:
The problem was in the fact that AES is switched off at the moment when he should give out the processed data. But because of the disabled, the operation can not be completed successfully, there is an infinite hang. The reason for this behavior is that the registers for controlling the inclusion of AES, SHA, MPI have shared registers and they were not protected from sharing.
Fix some related issue with shared using of AES SHA RSA accelerators.
Liu Zhi Fu [Wed, 21 Nov 2018 07:24:30 +0000 (15:24 +0800)]
esp32: fix some wifi bugs
Fix some wifi bugs
1. Enable RX BAR
2. Fix the bug that ESP32 AP negotiates with iphone to 11g
3. Fix the bug that ESP32 STA has ap_loss because CMCC AP contains two SSID
Ivan Grokhotkov [Fri, 12 Oct 2018 06:18:49 +0000 (14:18 +0800)]
freertos: use xTaskQueueMutex to protect tick count
Having two different spinlocks is problematic due to possibly
different order in which the locks will be taken. Changing the order
would require significant restructuring of kernel code which is
undesirable.
An additional place where taking xTickCountMutex was needed was in
vApplicationSleep function. Not taking xTickCountMutex resulted in
other CPU sometimes possibly advancing tick count while light sleep
entry/exit was happening. Taking xTickCountMutex in addition to
xTaskQueueMutex has shown a problem that in different code paths,
these two spinlocks could be taken in different order, leading to
(unlikely, but possible) deadlocks.
zhangyanjiao [Fri, 16 Nov 2018 12:18:05 +0000 (20:18 +0800)]
wifi: fix the bug that if station (sleep is enabled) and sniffer are enabled at the same time,
when disable sniffer, station will never enable phy and rf againi. (backport v3.1)
Tian Hao [Tue, 13 Nov 2018 09:29:44 +0000 (17:29 +0800)]
Fix two bugs when disable bluetooth controller
1. Fix the bug that disable controller suddenly cause crash when ble is working
2. Fix the bug that when disable controller, it will cause wifi cannot RX, TX timeout, buffer lack and etc.
baohongde [Tue, 6 Nov 2018 09:29:06 +0000 (17:29 +0800)]
components/bt: Point ACL RX buffer ptr to ACL RX buffer if ACL RX buffer ptr is null(backprot 3.1)
1. When WIFI task or other high priority task blocks the Bluetooth task, ACL RX buffer will use up, ACL RX buffer ptr will point to null and will never point to a valid adress. Causing errors in Bluetooth.
2. hcimsgs.h used whether flow control is on or off
wangmengyang [Tue, 6 Nov 2018 04:02:18 +0000 (12:02 +0800)]
component/bt: bugfix of two issues of sniff mode in classic bluetooth
1. resolve the error in calculating sniff anchor point that result in connection supervision timeout
2. resolve the issue of user case that requires sniff attempt is larger than 0xff
Mahavir Jain [Fri, 24 Aug 2018 12:26:38 +0000 (17:56 +0530)]
bootloader: keep bootloader_common code to retention region
It is possible to utilize some of the routines related to otadata
partition validation, after firmware image is downloaded to RAM. Hence
these routines should be part of app cpu cache, so that they do not
get overwritten by firmware.
CI: only create required jobs when use bot to trigger test:
Gitlab CI now allow us to define if a job need to be created by
varialbes. This commit add label to CI jobs, so we can make some jobs
not created in certain scenarios when we trigger pipeline with @bot.
Liu Zhi Fu [Mon, 22 Oct 2018 15:02:40 +0000 (23:02 +0800)]
esp32: fix some wifi bugs
Fix following WiFi bugs:
1. Fix the bug that MIC verification fails on soft-AP mode
2. Modify mesh root to have same behavior as normal WiFi STA in state change
3. Fix the bug that sniffer can't catch control packets
4. Fix crash bug in soft-AP mode
5. Fix ACM(Admission Control Management) bug
coexist : fix coexist bugs related to coex hw blocking
1. fix some bugs by previous coex hw blocking bugfix,
such like, rwble.c (64, 0) line 222
2. fix bug that ble scan performance is very low when software coexist
is working.
3. update libcoexist version to v1.1.0
projects / esp-idf / log