l10n: de.po: consistent translation of 'root commit'
'root commit' is usually translated as 'Root-Commit'. But in one
occasion it‘s translated as 'Basis-Commit' which is the translation
for 'base commit'.
Signed-off-by: Sebastian Staudt <koraktor@gmail.com>
Elijah Newren [Thu, 14 Feb 2019 20:25:41 +0000 (12:25 -0800)]
git-rebase.txt: update to reflect merge now implemented on sequencer
Since commit 8fe9c3f21dff (Merge branch 'en/rebase-merge-on-sequencer',
2019-02-06), --merge now uses the interactive backend (and matches its
behavior) so there is no separate merge backend anymore. Fix an
oversight in the docs that should have been updated with the previous
change.
Signed-off-by: Elijah Newren <newren@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Thu, 14 Feb 2019 06:35:13 +0000 (01:35 -0500)]
t/lib-httpd: pass GIT_TEST_SIDEBAND_ALL through Apache
07c3c2aa16 ("tests: define GIT_TEST_SIDEBAND_ALL", 2019-01-16) added
GIT_TEST_SIDEBAND_ALL to the apache.conf PassEnv list. Avoid warnings
from Apache when the variable is unset, as we do for GIT_VALGRIND* and
GIT_TRACE, from f628825481 ("t/lib-httpd: handle running under
--valgrind", 2012-07-24) and 89c57ab3f0 ("t: pass GIT_TRACE through
Apache", 2015-03-13), respectively.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 14 Feb 2019 20:16:20 +0000 (12:16 -0800)]
t1404: do not rely on the exact phrasing of strerror()
Not even in C locale, it is wrong to expect that the exact phrasing
"File exists" is used to show EEXIST.
Reported-by: Randall S. Becker <rsbecker@nexbridge.com> Helped-by: Duy Nguyen <pclouds@gmail.com> Helped-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 14 Feb 2019 02:18:43 +0000 (18:18 -0800)]
Merge branch 'rb/no-dev-zero-in-test'
* rb/no-dev-zero-in-test:
t5562: replace /dev/zero with a pipe from generate_zero_bytes
t5318: replace use of /dev/zero with generate_zero_bytes
test-lib-functions.sh: add generate_zero_bytes function
Junio C Hamano [Thu, 14 Feb 2019 02:18:41 +0000 (18:18 -0800)]
Merge branch 'bc/utf16-portability-fix'
The code and tests assume that the system supplied iconv() would
always use BOM in its output when asked to encode to UTF-16 (or
UTF-32), but apparently some implementations output big-endian
without BOM. A compile-time knob has been added to help such
systems (e.g. NonStop) to add BOM to the output to increase
portability.
* bc/utf16-portability-fix:
utf8: handle systems that don't write BOM for UTF-16
rebase: fix regression in rebase.useBuiltin=false test mode
Fix a recently introduced regression in c762aada1a ("rebase -x: sanity
check command", 2019-01-29) triggered when running the tests with
GIT_TEST_REBASE_USE_BUILTIN=false. See 62c23938fa ("tests: add a
special setup where rebase.useBuiltin is off", 2018-11-14) for how
that test mode works.
As discussed on-list[1] it's not worth it to implement the sanity
check in the legacy rebase code, we plan to remove it after the 2.21
release. So let's do the bare minimum to make the tests pass under the
GIT_TEST_REBASE_USE_BUILTIN=false special setup.
mingw: use a more canonical method to fix the CPU reporting
In `git version --build-options`, we report also the CPU, but in Git for
Windows we actually cross-compile the 32-bit version in a 64-bit Git for
Windows, so we cannot rely on the auto-detected value.
In 3815f64b0dd9 (mingw: fix CPU reporting in `git version
--build-options`, 2019-02-07), we fixed this by a Windows-only
workaround, making use of magic pre-processor constants, which works in
GCC, but most likely not all C compilers.
As pointed out by Eric Sunshine, there is a better way, anyway: to set
the Makefile variable HOST_CPU explicitly for cross-compiled Git. So
let's do that!
config.mak.uname: move location of bash on NonStop to CoreUtils
The default bash is now officially in /usr/coreutils/bin instead
of in /usr/local/bin. This version of bash is more stable and
recommended for all use as of the J06.22 and L18.02 operating
system revision levels. This new version provides more stability
of test results.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5562: replace /dev/zero with a pipe from generate_zero_bytes
To help platforms that lack /dev/zero (e.g. NonStop), replace use
of /dev/zero to feed "git http-backend" with a pipe of output from
the generate_zero_bytes helper.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
t5318: replace use of /dev/zero with generate_zero_bytes
There are platforms (e.g. NonStop) that lack /dev/zero; use the
generate_zero_bytes helper we just introduced to append stream
of NULs at the end of the file.
The original, even though it uses "dd seek=... count=..." to make it
look like it is overwriting the middle part of an existing file, has
truncated the file before this step with another use of "dd", which
may make it tricky to see why this rewrite is a correct one.
Signed-off-by: Randall S. Becker <rsbecker@nexbridge.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duy Nguyen [Tue, 12 Feb 2019 12:43:23 +0000 (19:43 +0700)]
get_oid_with_context(): match prototype and implementation
The get_oid_with_context() function is declared to return an enum in
cache.h, but defined to return an int in sha1-name.c. The compiler
notices this on AIX and rejects the build, since d1dd94b308 (Do not
print 'dangling' for cat-file in case of ambiguity - 2019-01-17) was
merged.
Return the correct type from the implementation to fix this.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Duy Nguyen [Tue, 12 Feb 2019 14:14:41 +0000 (21:14 +0700)]
git-compat-util: work around fileno(fp) that is a macro
On various BSD's, fileno(fp) is implemented as a macro that directly
accesses the fields in the FILE * object, which breaks a function that
accepts a "void *fp" parameter and calls fileno(fp) and expect it to
work.
Work it around by adding a compile-time knob FILENO_IS_A_MACRO that
inserts a real helper function in the middle of the callchain.
Signed-off-by: Nguyễn Thái Ngọc Duy <pclouds@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Jeff King [Tue, 12 Feb 2019 06:33:04 +0000 (01:33 -0500)]
RelNotes/2.21: misc typo/English fixups
These are just some small fixes I noticed doing a complete read-through
(there are a few cases I left that are incomplete or abbreviated
sentences, but I think those are OK in this sort of bullet-list style).
Signed-off-by: Jeff King <peff@peff.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
brian m. carlson [Tue, 12 Feb 2019 00:52:06 +0000 (00:52 +0000)]
utf8: handle systems that don't write BOM for UTF-16
When serializing UTF-16 (and UTF-32), there are three possible ways to
write the stream. One can write the data with a BOM in either big-endian
or little-endian format, or one can write the data without a BOM in
big-endian format.
Most systems' iconv implementations choose to write it with a BOM in
some endianness, since this is the most foolproof, and it is resistant
to misinterpretation on Windows, where UTF-16 and the little-endian
serialization are very common. For compatibility with Windows and to
avoid accidental misuse there, Git always wants to write UTF-16 with a
BOM, and will refuse to read UTF-16 without it.
However, musl's iconv implementation writes UTF-16 without a BOM,
relying on the user to interpret it as big-endian. This causes t0028 and
the related functionality to fail, since Git won't read the file without
a BOM.
Add a Makefile and #define knob, ICONV_OMITS_BOM, that can be set if the
iconv implementation has this behavior. When set, Git will write a BOM
manually for UTF-16 and UTF-32 and then force the data to be written in
UTF-16BE or UTF-32BE. We choose big-endian behavior here because the
tests use the raw "UTF-16" encoding, which will be big-endian when the
implementation requires this knob to be set.
Update the tests to detect this case and write test data with an added
BOM if necessary. Always write the BOM in the tests in big-endian
format, since all iconv implementations that omit a BOM must use
big-endian serialization according to the Unicode standard.
Preserve the existing behavior for systems which do not have this knob
enabled, since they may use optimized implementations, including
defaulting to the native endianness, which may improve performance.
Signed-off-by: brian m. carlson <sandals@crustytoothpaste.net> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Kevin Daudt [Mon, 11 Feb 2019 21:38:18 +0000 (22:38 +0100)]
t0028: fix wrong octal values for BOM in setup
The setup code uses octal values with printf to generate a BOM for
UTF-16/32 BE/LE. It specifically uses '\777' to emit a 0xff byte. This
relies on the fact that most shells truncate the value above 0o377.
Ash however interprets '\777' as '\77' + a literal '7', resulting in an
invalid BOM.
Fix this by using the proper value of 0xff: '\377'.
Signed-off-by: Kevin Daudt <me@ikke.info> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Use a '!' character to start a non-matching pattern bracket
expression, as specified by POSIX in Shell Command Language section
2.13.1 Patterns Matching a Single Character [1].
I used '^' instead in three places in the previous three commits, to
verify that the arguments of the '--stress=' and '--stress-limit='
options and the values of various '*_PORT' environment variables are
valid numbers. With certain shells, at least with dash (upstream and
in Ubuntu 14.04) and mksh, this led to various undesired behaviors:
# error message in case of a valid number
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=8
error: --stress=<N> requires the number of jobs to run
# not the expected error message
$ ~/src/dash/src/dash ./t3903-stash.sh --stress=foo
./t3903-stash.sh: 238: test: Illegal number: foo
# no error message at all?!
$ mksh ./t3903-stash.sh --stress=foo
$ echo $?
0
Some other shells, e.g. Bash (even in posix mode), ksh, dash in Ubuntu
16.04 or later, are apparently happy to accept '^' just as well.
Ramsay Jones [Mon, 11 Feb 2019 17:16:58 +0000 (17:16 +0000)]
sequencer: make sign_off_header a file local symbol
Commit d0aaa46fd3 ("commit: move empty message checks to libgit",
2017-11-10) removes the last use of 'sign_off_header' outside of
the "sequencer.c" source file. Remove the extern declaration from
the header file and mark the definition of the symbol with the
static keyword.
Signed-off-by: Ramsay Jones <ramsay@ramsayjones.plus.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Sat, 9 Feb 2019 04:44:51 +0000 (20:44 -0800)]
Merge branch 'nd/checkout-noisy-unmerge'
"git checkout [<tree-ish>] <pathspec>" started reporting the number
of paths that have got updated recently, but the same messages were
given when "git checkout -m <pathspec>" to unresolve conflicts that
have just been resolved. The message now reports these unresolved
paths separately from the paths that are checked out from the index.
SZEDER Gábor [Fri, 8 Feb 2019 11:50:45 +0000 (12:50 +0100)]
test-lib: make '--stress' more bisect-friendly
Let's suppose that a test somehow becomes flaky between 'master' and
'pu', and tends to fail within the first 50 repetitions when run with
'--stress'. In such a case we could use 'git bisect' to find the
culprit: if the test script fails with '--stress', then the commit is
definitely bad, but if it survives, say, 300 repetitions, then we could
consider it good with reasonable confidence.
Unfortunately, all this could only be done manually, because
'--stress' would run the test script repeatedly for all eternity on a
good commit, and it would exit with success even when it found a
failure on a bad commit.
So let's make '--stress' usable with 'git bisect run':
- Make it exit with failure if a failure is found.
- Add the '--stress-limit=<N>' option to repeat the test script
at most N times in each of the parallel jobs, and exit with
success when the limit is reached.
And then we could simply run something like:
$ git bisect start origin/pu master
$ git bisect run sh -c 'make && cd t &&
./t1234-foo.sh --stress --stress-limit=300'
Sure, as a brand new feature it won't be any useful right now, but in
a release or three most cooking topics will already contain this, so
we could automatically bisect at least newly introduced flakiness.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Fri, 8 Feb 2019 03:17:46 +0000 (22:17 -0500)]
t/lib-gpg: drop redundant killing of gpg-agent
In 53fc999306 ("gpg-interface t: extend the existing GPG tests with
GPGSM", 2018-07-20), the gpgconf call which kills gpg-agent was copied
from the existing gpg setup code.
The reason for killing gpg-agent is given in 29ff1f8f74 ("t: lib-gpg:
flush gpg agent on startup", 2017-07-20):
When running gpg-relevant tests, a gpg-daemon is spawned for each
GNUPGHOME used. This daemon may stay running after the test and cache
file descriptors for the trash directories, even after the trash
directory is removed. This leads to ENOENT errors when attempting to
create files if tests are run multiple times.
Add a cleanup script to force flushing the gpg-agent for that GNUPGHOME
(if any) before setting up the GPG relevant-environment.
Killing gpg-agent once per test is sufficient.
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Todd Zullinger [Fri, 8 Feb 2019 03:17:45 +0000 (22:17 -0500)]
t/lib-gpg: quote path to ${GNUPGHOME}/trustlist.txt
When gpgsm is installed, lib-gpg.sh attempts to update trustlist.txt to
relax the checking of some root certificate requirements. The path to
"${GNUPGHOME}" contains spaces which cause an "ambiguous redirect"
warning when bash is used to run the tests:
$ bash t7030-verify-tag.sh
/git/t/lib-gpg.sh: line 66: ${GNUPGHOME}/trustlist.txt: ambiguous redirect
ok 1 - create signed tags
ok 2 # skip create signed tags x509 (missing GPGSM)
...
No warning is issued when using bash called as /bin/sh, dash, or mksh.
Quote the path to ensure the redirect works as intended and sets the
GPGSM prereq. While we're here, drop the space after ">>".
Signed-off-by: Todd Zullinger <tmz@pobox.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
mingw: fix CPU reporting in `git version --build-options`
We cannot rely on `uname -m` in Git for Windows' SDK to tell us what
architecture we are compiling for, as we can compile both 32-bit and
64-bit `git.exe` from a 64-bit SDK, but the `uname -m` in that SDK will
always report `x86_64`.
So let's go back to our original design. And make it explicitly
Windows-specific.
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Josh Steadmon [Thu, 7 Feb 2019 20:05:54 +0000 (12:05 -0800)]
object: fix leak of shallow_stat
In eee4502baaf ("shallow: migrate shallow information into the object
parser", 2018-05-17), we added a stat_validity pointer into the
parsed_object_pool struct, but did not add code to free this in
parsed_object_pool_clear(). This leak was found by fuzz-commit-graph.
Clear the struct and then free it in parsed_object_pool_clear() to
prevent the leak.
Signed-off-by: Josh Steadmon <steadmon@google.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
doc: prevent overflowing <code> tag in rendered HTML
Add an apparently missing back-tick to fix a multi-line <code> section
on https://git-scm.com/docs/git-log which seems to have been caused by
commit 18fb7ffc ("pretty: respect color settings [...]", 2017-07-13).
Signed-off-by: Katrin Leinweber <katrin.leinweber@uni-konstanz.de> Signed-off-by: Junio C Hamano <gitster@pobox.com>
Junio C Hamano [Thu, 7 Feb 2019 19:36:28 +0000 (11:36 -0800)]
ci: clear and mark MAKEFLAGS exported just once
Clearing it once upfront, and turning all the assignment into
appending, would future-proof the code even more, to prevent
mistakes the previous one fixed from happening again.
Also, mark the variable exported just once at the beginning. There
is no point in marking it exported repeatedly.
SZEDER Gábor [Thu, 7 Feb 2019 18:37:36 +0000 (19:37 +0100)]
ci: make sure we build Git parallel
Commit 2c8921db2b (travis-ci: build with the right compiler,
2019-01-17) started to use MAKEFLAGS to specify which compiler to use
to build Git. A bit later, and in a different topic branch commit eaa62291ff (ci: inherit --jobs via MAKEFLAGS in run-build-and-tests,
2019-01-27) started to use MAKEFLAGS as well. Unfortunately, there is
a semantic conflict between these two commits: both of them set
MAKEFLAGS, and since the line adding CC from 2c8921db2b comes later in
'ci/lib.sh', it overwrites the number of parallel jobs added in eaa62291ff.
Consequently, since both commits have been merged all our CI jobs have
been building Git, building its documentation, and applying semantic
patches sequentially, making all build jobs a bit slower. Running
the test suite is unaffected, because the number of test jobs comes
from GIT_PROVE_OPTS.
Append to MAKEFLAGS when setting the compiler to use, to ensure that
the number of parallel jobs to use is preserved.
Signed-off-by: SZEDER Gábor <szeder.dev@gmail.com> Signed-off-by: Junio C Hamano <gitster@pobox.com>
"git fetch" over protocol v2 that needs to make a second connection
to backfill tags did not clear a variable that holds shallow
repository information correctly, leading to an access of freed
piece of memory.
* bc/fetch-pack-clear-alternate-shallow:
fetch-pack: clear alternate shallow in one more place
fetch-pack: clear alternate shallow when complete
Junio C Hamano [Thu, 7 Feb 2019 06:05:29 +0000 (22:05 -0800)]
Merge branch 'ma/doc-diff-usage-fix'
Running "Documentation/doc-diff x" from anywhere other than the
top-level of the working tree did not show the usage string
correctly, which has been fixed.
"git --work-tree=$there --git-dir=$here describe --dirty" did not
work correctly as it did not pay attention to the location of the
worktree specified by the user by mistake, which has been
corrected.
* ss/describe-dirty-in-the-right-directory:
t6120: test for describe with a bare repository
describe: setup working tree for --dirty
The way the OSX build jobs updates its build environment used the
"--quiet" option to "brew update" command, but it wasn't all that
quiet to be useful. The use of the option has been replaced with
an explicit redirection to the /dev/null (which incidentally would
have worked around a breakage by recent updates to homebrew, which
has fixed itself already).
* sg/travis-osx-brew-breakage-workaround:
travis-ci: make the OSX build jobs' 'brew update' more quiet
Junio C Hamano [Thu, 7 Feb 2019 06:05:27 +0000 (22:05 -0800)]
Merge branch 'sh/submodule-summary-abbrev-fix'
The "git submodule summary" subcommand showed shortened commit
object names by mechanically truncating them at 7-hexdigit, which
has been improved to let "rev-parse --short" scale the length of
the abbreviation with the size of the repository.
* sh/submodule-summary-abbrev-fix:
git-submodule.sh: shorten submodule SHA-1s using rev-parse
Junio C Hamano [Thu, 7 Feb 2019 06:05:26 +0000 (22:05 -0800)]
Merge branch 'js/vsts-ci'
Prepare to run test suite on Azure Pipeline.
* js/vsts-ci: (22 commits)
test-date: drop unused parameter to getnanos()
ci: parallelize testing on Windows
ci: speed up Windows phase
tests: optionally skip bin-wrappers/
t0061: workaround issues with --with-dashes and RUNTIME_PREFIX
tests: add t/helper/ to the PATH with --with-dashes
mingw: try to work around issues with the test cleanup
tests: include detailed trace logs with --write-junit-xml upon failure
tests: avoid calling Perl just to determine file sizes
README: add a build badge (status of the Azure Pipelines build)
mingw: be more generous when wrapping up the setitimer() emulation
ci: use git-sdk-64-minimal build artifact
ci: add a Windows job to the Azure Pipelines definition
Add a build definition for Azure DevOps
ci/lib.sh: add support for Azure Pipelines
tests: optionally write results as JUnit-style .xml
test-date: add a subcommand to measure times in shell scripts
ci: use a junction on Windows instead of a symlink
ci: inherit --jobs via MAKEFLAGS in run-build-and-tests
ci/lib.sh: encapsulate Travis-specific things
...
The documentation of "git commit-tree" said that the command
understands "--gpg-sign" in addition to "-S", but the command line
parser did not know about the longhand, which has been corrected.
* br/commit-tree-fully-spelled-gpg-sign-option:
commit-tree: add missing --gpg-sign flag
t7510: invoke git as part of &&-chain
projects / git / log