Yaowu Xu [Thu, 4 Aug 2011 23:30:27 +0000 (16:30 -0700)]
add quantizer adaptive intra mb mode encoding
make intra mode coding entropy distribution adaptive to baseQindex, an
encoding test on hd clips with all key frame shows universal gain on
all clips in both .2%(psnr) and (ssim).3%.
To build and test, configure with
--enable-experimental --enable-qimode
Yaowu Xu [Thu, 4 Aug 2011 23:30:27 +0000 (16:30 -0700)]
add 8x8 intra prediction modes
Patch 1 to Patch 3 is an initial implementation of 8x8 intra prediction
modes, here are with the following assumptions:
a. 8x8 has 4 prediction modes DC, H, V and TM
b. UV 4x4 block use the same mode as corresponding 8x8 area
c. i8x8 modes are enabled for key frame only for now
Patch 4:
d. removed debug code from previous patches
Patch 5:
e. added stats code to collect entropy stats and further cleaned up
Patch 6:
f. changed mode stats code to collect finer stats of modes
Patch 7:
g. normalized i8x8 modes distribution to total at 256 (8bits).
Patch 8:
h. fixed a bug in decoder and removed debug printf output.
Patch 9:
i. more cleanups to address paul's comment
Patch 10:
j. messy rebase/merges to bring the commit up to date.
Tests on HD clips encoded with all key frame showing consistent gain
on all clips and all metrics:~0.5%(psnr) and 0.6%(ssim):
http://www.corp.google.com/~yaowu/no_crawl/i8x8hd_allkey_fixedq.html
To build and test, configure with:
--enable-experimental --enable-i8x8
Scott LaVarnway [Wed, 24 Aug 2011 18:42:26 +0000 (14:42 -0400)]
Removed bmi copy to/from BLOCKD
for SPLITMV and B_PRED modes. Modified code to use the bmi
found in mode_info_context instead of BLOCKD. On the decode
side, the uvmvs are calculated only when required, instead of
every macroblock. This is WIP. (bmi should eventually be
removed from BLOCKD)
Small performance gains noticed for RT encodes and decodes.(VGA)
Fritz Koenig [Mon, 22 Aug 2011 22:29:41 +0000 (15:29 -0700)]
Use local labels for jumps/loops in x86 assembly.
Prepend . to local labels in assembly code. This
allows non unique labels within a file. Also
makes profiling information more informative
by keeping the function name with the loop name.
Fritz Koenig [Mon, 22 Aug 2011 19:36:28 +0000 (12:36 -0700)]
Reclassify optimized ssim calculations as SSE2.
Calculations were incorrectly classified as either
SSE3 or SSSE3. Only using SSE2 instructions.
Cleanup function names and make non-RTCD code work
as well.
Fritz Koenig [Fri, 19 Aug 2011 15:51:27 +0000 (08:51 -0700)]
Reclasify optimized ssim calculations as SSE2.
Calculations were incorrectly classified as either
SSE3 or SSSE3. Only using SSE2 instructions.
Cleanup function names and make non-RTCD code work
as well.
Alpha Lam [Tue, 9 Aug 2011 19:59:45 +0000 (20:59 +0100)]
Copy less when active map is in use
When active map is specified and the current frame is not a key frame,
golden frame nor a altref frame then copy only those active regions.
This significantly reduces encoding time by as much as 19% on the test
system where realtime encoding is used. This is particularly useful
when the frame size is large (e.g. 2560x1600) and there's only a few
action macroblocks.
Paul Wilkins [Wed, 17 Aug 2011 13:14:23 +0000 (14:14 +0100)]
Small boost to every other frame.
Instead of a single mid GF boost apply a few extra bits to
every other frame. This gives a very small average metrics
improvement on both derf and YT sets.
John Koleszar [Fri, 12 Aug 2011 18:51:36 +0000 (14:51 -0400)]
Revert "Improved 1-pass CBR rate control"
This reverts commit b5ea2fbc2c1554769848774c836aad262af95072. Further
testing showed noticable keyframe popping in some cases, reverting this
for now to give time for a proper fix.
John Koleszar [Fri, 12 Aug 2011 15:30:54 +0000 (11:30 -0400)]
Propagate macroblock MV to subblocks for error concealment
EC expects the subblock MVs to be populated, but f1d6cc79e43f0066632f19c1854ca365086b712b removed this code. This
commit restores it, protected by CONFIG_ERROR_CONCEALMENT. May move this
to the EC code more directly in the future.
Stefan Holmer [Mon, 8 Aug 2011 08:56:20 +0000 (10:56 +0200)]
Disable error concealment until first key frame is decoded
When error concealment is enabled the first key frame must
be successfully received before error concealment is activated.
Error concealment will be activated when the delta following
delta frame is received.
Also fixed a couple of bugs related to error tracking in
multi-threading. And avoiding decoding corrupt residual
when we have multiple non-resilient partitions.
John Koleszar [Fri, 5 Aug 2011 16:27:25 +0000 (12:27 -0400)]
Fix potential OOB read with Error Concealment
This patch fixes an OOB read when error concealment is enabled and the
partition sizes are corrupt. The partition size read from the bitstream
was not being validated in EC mode.
John Koleszar [Fri, 12 Aug 2011 15:30:54 +0000 (11:30 -0400)]
Propagate macroblock MV to subblocks for error concealment
EC expects the subblock MVs to be populated, but f1d6cc79e43f0066632f19c1854ca365086b712b removed this code. This
commit restores it, protected by CONFIG_ERROR_CONCEALMENT. May move this
to the EC code more directly in the future.
Stefan Holmer [Mon, 8 Aug 2011 08:56:20 +0000 (10:56 +0200)]
Disable error concealment until first key frame is decoded
When error concealment is enabled the first key frame must
be successfully received before error concealment is activated.
Error concealment will be activated when the delta following
delta frame is received.
Also fixed a couple of bugs related to error tracking in
multi-threading. And avoiding decoding corrupt residual
when we have multiple non-resilient partitions.
John Koleszar [Fri, 5 Aug 2011 16:27:25 +0000 (12:27 -0400)]
Fix potential OOB read with Error Concealment
This patch fixes an OOB read when error concealment is enabled and the
partition sizes are corrupt. The partition size read from the bitstream
was not being validated in EC mode.
John Koleszar [Wed, 3 Aug 2011 20:12:12 +0000 (16:12 -0400)]
Fix source buffer selection
This patch fixes a bug in the interaction between the recode loop and
spatial resampling. If the codec was in a spatial resampling state,
and a subsequent iteration of the recode loop disables resampling,
then the source buffer must be reset to the unscaled source.
Yunqing Wang [Wed, 3 Aug 2011 15:51:07 +0000 (11:51 -0400)]
Adjust half-pixel only search
Changed motion search in vp8_find_best_half_pixel_step() to be the
same as in vp8_find_best_sub_pixel_step(), which checks 5 points
instead of 8 points. This only affects real-time mode with
cpu-used >=9. Tests showed it gives 2% encoding speedup with
a quality loss(psnr) of up to 0.5%.
John Koleszar [Wed, 3 Aug 2011 13:20:37 +0000 (09:20 -0400)]
Fix building of static libs on universal-darwin
The static libs should not be built from sources during the top level
of a universal build. This regression was introduced in commit 495b241fa6b03345baf2b2f39aa8c06c735fccc2, which made the static
libs selectable under CONFIG_STATIC.
projects / libvpx / log