yulong [Thu, 13 Oct 2016 13:13:21 +0000 (09:13 -0400)]
commponent bt:1.added the bt_prf_sys_main.c file which has been process the profile task event method;
2.modified the thread.h file==> added the profile task event in it
3.modified bt_prf_task.c==>added the ready function in it
4.added the bt_prf_sys.h file
5.remove the profile_sys.h file
yulong [Thu, 13 Oct 2016 08:02:30 +0000 (04:02 -0400)]
commponent bt:1.add bt_prf_act.c file for the state machine
2.add the bt_app_api.h file
3.modified the bt_prf_task.c==>added the free & start task function
yulong [Thu, 13 Oct 2016 03:41:30 +0000 (23:41 -0400)]
commponent bt: 1.added the bt_app_sec.c file used for the security of the bt module;
2.added the bt_app_sec.h file which defined the sturct used for the bt security
yulong [Wed, 12 Oct 2016 07:38:26 +0000 (03:38 -0400)]
commponent bt:add bt_prf_task.c file for proceess the profile task event
add bt_prf_task.h for defined the data & struct used for the profile task
add prodile_sys.h defined the profile system data used for profile task
modified component.mk
yulong [Tue, 11 Oct 2016 09:43:36 +0000 (05:43 -0400)]
commponent bt:add the wechat airsync profile to the project
1. add the wx_airsync_prf.h which have been define the sturcter data has been
used for the wechat airsync profile database
2. add the wx_airsync_prf.c file
3. add the app_airsync_md5.c file
4. add the app_airsync_prf.c
5. add epb.c file
6. add epb_mmbp.c
7. add mpbledemo2.c
8. add wechar_crc.c
9 add wechat_aes.c
10. add app_airsync_md5.h
11. add app_airsync_prf.h
12. add app_wechat_util.h
13. add epb.h
14. add epb_mmbp.h
15 add mpbledemo2.h
16 add wechar_crc.h
17 add wechat_aes.h
wangmengyang [Mon, 10 Oct 2016 13:34:21 +0000 (21:34 +0800)]
1. Recover "future_t" model implementation using semaphore to allow for blocking function
2. Recover BTU task start-up/shut-down procedure according to original bluedroid implementation
Merge branch 'feature/deep_sleep_wake_stub' into 'master'
esp32: Bootloader wake deep sleep stub
App can contain a stub program resident in RTC fast memory. Bootloader
will load the stub on initial boot. If the device wakes from deep sleep,
the stub is run immediately (before any other data is loaded, etc.)
To implement a custom wake stub, implement a function in your program:
```
void RTC_IRAM_ATTR esp_wake_deep_sleep(void)
{
esp_default_wake_deep_sleep();
// other wake logic
}
```
... and it will replace the default implementation.
jack [Thu, 29 Sep 2016 08:29:13 +0000 (16:29 +0800)]
Add Comments
We reserve 4KB Slow RTC memory to save RF calibation result and BT NVS data.
If not all these Slow RTC momory Blocks are used, we will open the other parts.
Merge branch 'workaround/pin_noaffinity_task_to_core_when_fpu_used' into 'master'
Workaround: Automatically pin no-cpu-affinity task to a core when FPU is used
FPU status at the moment does not migrate cleanly between cores, so tasks without affinity that happen to migrate across FPUs will run into problems. As a workaround, this modification will automatically pin the task to the current CPU when FPU activity is detected. If anything, it's better than getting all kinds of weird and wonderful FPU corruption issues...
Merge branch 'feature/freertos_untested_feature_assert' into 'master'
Assert on untested FreeRTOS features
When I SMP-enabled, I went through all the functions and made the necessary modifiucations. I however only managed to test the most used functions thoroughly. While we should test all FreeRTOS functions eventually, this MR will mark the ones we have not tested yet with a macro call that will, if enabled in MenuConfig (default enabled) assert() when the untested function is called.
Also removes some superfluous mux initializion code in EventGroups code.
1. configure LEDC timer saparately
2. add peripher_crtl.c/.h
To enable the peripheral modules, we have to set/clear the control register in dport_reg.h.
These bits are disabled by default and they are all in a same register, so we need to add a lock on that.
3. add include esp_err.h in gpio.h
App can contain a stub program resident in RTC fast memory. Bootloader
will load the stub on initial boot. If the device wakes from deep sleep,
the stub is run immediately (before any other data is loaded, etc.)
To implement a custom wake stub, implement a function in your program:
```
void RTC_IRAM_ATTR esp_wake_deep_sleep(void)
{
esp_default_wake_deep_sleep();
// other wake logic
}
```
... and it will replace the default implementation.
Ivan Grokhotkov [Tue, 27 Sep 2016 14:08:27 +0000 (22:08 +0800)]
Merge branch 'master' into feature/btdm_controller
* master:
app_main: Return type to void
wifi: move type definitions into separate header file
wifi: use default esp_event_send handler in WIFI_INIT_CONFIG_DEFAULT
nvs: Remove flash layout arguments from nvs_init()
Add contributor agreement, update CONTRIBUTING file
Update http_request & https_request examples for new startup flow
Add very simple "hello world" & "blink" examples
Build examples out-of-tree as part of CI process
Examples: Use event groups for waiting until WiFi is associated & ESP has IP
BT example: Enable BT stack in config by default
BT: Relink component on new BT library, auto-initialise submodule if missing
Documentation: Add contributor guide, expand README & add an examples README
Update gitignore for examples
examples: Add https_request example
mbedtls: Add some initial menuconfig options
examples: HTTP request example
component/esp32: udpate wifi lib
component/esp32: modify bool argument name from enable to en
component/esp32: adjust some APIs
esptool: Bump upstream revision
1. move the app demo code to example
2. move the header files to correct path
3. move profile to profiles directory and seperate esp&std
4. some other codes
5. needs continue to cleanup the code
Ivan Grokhotkov [Tue, 27 Sep 2016 04:40:56 +0000 (12:40 +0800)]
Merge branch 'master' into feature/btdm_controller
* master: (32 commits)
components/nghttp: rename Makefile to component.mk
components/nghttp: add HTTP2.0 protocol feature
compoenents/esp32: don't alias start_cpu1 to start_cpu0_default
components/freertos: fix a bug with an uninitialised return value
Change application entry point name back to app_main
gitlab-ci: build SSC with matching branch name, if available
components/spi_flash: remove stray level of indentation
components/nvs: fix broken sentences in comment blocks
components/esp32: fix renaming of esp_event_set_cb, minor clean up
components/esp32: remove "_user" part from entry points, weaken start_cpu0/1
Fix a spelling mistake in panic message, add carriage return to stack canary message
components/lwip,esp32: fixes for C++
components/bt: fix compilation, remove ./ from makefile
components/esp32: clarify type of queue in wifi_init_config_t, add default init macro
components/esp32: add ESP_ERROR_CHECK
Event handling refactoring
clean up warnings
components/esp32,bt: fix typos in comments
Startup flow refactoring
Roll back submodule version
...
Ivan Grokhotkov [Tue, 27 Sep 2016 03:47:47 +0000 (11:47 +0800)]
wifi: move type definitions into separate header file
While this may reduce esp_wifi.h file readability for people who don't have a "go to definition" function in their editors, this is needed to decouple esp_wifi and esp_event headers, and possibly other headers which may use wifi types in the future.
nghttp only support HTTP2.0 parse function, it has nothing to do with other modules. when Communicate with the server, suggest that you use it on the TLS layer.
projects / esp-idf / log