]>
granicus.if.org Git - esp-idf/log
Angus Gratton [Mon, 21 May 2018 00:07:49 +0000 (08:07 +0800)]
Merge branch 'feature/gcov_dbg_stubs' into 'master'
Feature/gcov dbg stubs
See merge request idf/esp-idf!1494
Jiang Jiang Jian [Sun, 20 May 2018 09:26:57 +0000 (17:26 +0800)]
Merge branch 'mesh/update_libs' into 'master'
mesh: update libs
See merge request idf/esp-idf!2416
qiyueixa [Fri, 18 May 2018 04:25:52 +0000 (12:25 +0800)]
mesh: update libs
1. use pbkdf2_sha1() to encrypted mesh ie key.
2. fix esp_mesh_waive_root().
3. fix esp_mesh_stop().
4. fix xon issues.
Jiang Jiang Jian [Sat, 19 May 2018 09:04:24 +0000 (17:04 +0800)]
Merge branch 'feature/add_event_SYSTEM_EVENT_AP_STAIPASSIGNED' into 'master'
add event SYSTEM_EVENT_AP_STAIPASSIGNED
See merge request idf/esp-idf!2202
Jiang Jiang Jian [Sat, 19 May 2018 09:00:17 +0000 (17:00 +0800)]
Merge branch 'bugfix/docs_fix_vcp_driver_link' into 'master'
docs: fix link for FTDI VCP drivers
See merge request idf/esp-idf!2420
Jiang Jiang Jian [Sat, 19 May 2018 08:20:49 +0000 (16:20 +0800)]
Merge branch 'feature/unified_btdm_modem_sleep_with_coex' into 'master'
component/bt: implement bluetooth modem sleep
See merge request idf/esp-idf!2198
wangmengyang [Sun, 8 Apr 2018 11:19:47 +0000 (19:19 +0800)]
component/bt: implement bluetooth modem sleep mode, one mode for BLE only and another for dual mode bluetooth
1. provide options for bluetooth low power mode
2. provide two options for bluetooth low power clock: main XTAL and external 32kHz XTAL
3. provide function and callbacks to control bluetooth low power mode, including enable/disable sleep, software wakeup request, low power clock settings, check power state, etc
4. modify vhci API vhci_host_send_packet to use blocking mode
5. note that DFS and bluetooth modem sleep can not be used together currently.
zhangyanjiao [Mon, 9 Apr 2018 03:01:44 +0000 (11:01 +0800)]
add event SYSTEM_EVENT_AP_STAIPASSIGNED
Jiang Jiang Jian [Fri, 18 May 2018 16:44:56 +0000 (00:44 +0800)]
Merge branch 'doc/nvs_flash_encryption' into 'master'
nvs README: Remove section about encryption capability
See merge request idf/esp-idf!2404
Alexey Gerenkov [Thu, 15 Feb 2018 17:09:03 +0000 (20:09 +0300)]
esp32: Adds GCOV debug stubs support
Adds the following functionality
- Debug stubs infrastructure
- Stub for retrieveing GCOV data without user source code modification
Mahavir Jain [Fri, 18 May 2018 11:39:53 +0000 (17:09 +0530)]
docs: fix link for FTDI VCP drivers
Signed-off-by: Mahavir Jain <mahavir@espressif.com>
Jiang Jiang Jian [Fri, 18 May 2018 09:29:32 +0000 (17:29 +0800)]
Merge branch 'feature/add_more_information_about_wifi_config' into 'master'
wifi: Add more information about wifi config
See merge request idf/esp-idf!2384
Angus Gratton [Fri, 18 May 2018 07:22:20 +0000 (15:22 +0800)]
Merge branch 'feature/vfs_find_free_fd' into 'master'
Add "find file descriptor" API to be used by VFS drivers
See merge request idf/esp-idf!2389
Angus Gratton [Fri, 18 May 2018 07:04:25 +0000 (15:04 +0800)]
Merge branch 'feature/vfs_select' into 'master'
Allow VFS file descriptors in select()
See merge request idf/esp-idf!2377
Roland Dobai [Thu, 3 May 2018 08:41:10 +0000 (10:41 +0200)]
Allow VFS file descriptors in select()
Roland Dobai [Fri, 11 May 2018 13:56:53 +0000 (15:56 +0200)]
VFS: allow to find free file descriptors & register them
Deng Xin [Fri, 11 May 2018 06:49:16 +0000 (14:49 +0800)]
(wifi): Add more information about wifi config
1. Update libphy.a to v3900
2. Update librtc.a to v238
3. add scan_method, sort_method and threshold when invoke esp_wifi_get_config()
4. add rssi of each STA in softAP list
5. add country information in scan result
6. add noise floor in rx pkt
Closes https://github.com/espressif/esp-idf/issues/1095
Closes https://github.com/espressif/esp-idf/issues/1723
Closes https://github.com/espressif/esp-idf/issues/1483
Jiang Jiang Jian [Fri, 18 May 2018 03:35:33 +0000 (11:35 +0800)]
Merge branch 'bugfix/performance_tests_psram' into 'master'
tests: Increase performance thresholds when running with PSRAM
See merge request idf/esp-idf!2414
Angus Gratton [Fri, 18 May 2018 02:10:13 +0000 (10:10 +0800)]
Merge branch 'bugfix/idle_task_stack_size' into 'master'
freertos: Bump default idle task stack size to 1536 bytes
See merge request idf/esp-idf!2411
Jiang Jiang Jian [Fri, 18 May 2018 01:55:45 +0000 (09:55 +0800)]
Merge branch 'feature/tw15298_support_create_wifi_task_on_any_core' into 'master'
esp32: support to create wifi task on any core
See merge request idf/esp-idf!2379
Jiang Jiang Jian [Fri, 18 May 2018 01:52:17 +0000 (09:52 +0800)]
Merge branch 'bugfix/update_ota_download_valid_bin' into 'master'
bugfix(ota): update ota to download valid bin file
See merge request idf/esp-idf!2038
Liu Zhi Fu [Thu, 3 May 2018 09:02:44 +0000 (17:02 +0800)]
esp32: support to create wifi task on any core
Support to create WiFi task on any core.
Closes https://github.com/espressif/esp-idf/issues/968
Jiang Jiang Jian [Thu, 17 May 2018 13:53:06 +0000 (21:53 +0800)]
Merge branch 'bugfix/i2s_mix_result_with_error_code_master' into 'master'
fix i2s mix result and error code
See merge request idf/esp-idf!2227
Jiang Jiang Jian [Thu, 17 May 2018 13:49:40 +0000 (21:49 +0800)]
Merge branch 'feature/add_set_factory_info_customer_in_wps_v3.1' into 'master'
wifi: add set factory information feature by customer in wps
See merge request idf/esp-idf!2412
Angus Gratton [Thu, 17 May 2018 11:12:45 +0000 (19:12 +0800)]
tests: Increase performance threshold for VFS running with PSRAM
Cache effects on microbenchmarks in cached flash can be significant, depending on linker layout in flash.
Jiang Jiang Jian [Thu, 17 May 2018 09:17:14 +0000 (17:17 +0800)]
Merge branch 'bugfix/fix_an_error_in_comment_of_uart_driver' into 'master'
deiver(uart):revise the explanation of uart break length
See merge request idf/esp-idf!2398
Jiang Jiang Jian [Thu, 17 May 2018 08:48:13 +0000 (16:48 +0800)]
Merge branch 'bugfix/o3_fails' into 'master'
Fix compilation errors when -O3 is used
See merge request idf/esp-idf!2396
Deng Xin [Mon, 14 May 2018 02:58:19 +0000 (10:58 +0800)]
wifi: add set factory information feature by customer in wps
Jiang Jiang Jian [Thu, 17 May 2018 08:33:38 +0000 (16:33 +0800)]
Merge branch 'bugfix/wifi_fix_a_few_wifi_bugs' into 'master'
Fix a few WiFi bugs
See merge request idf/esp-idf!2312
Jiang Jiang Jian [Thu, 17 May 2018 08:21:46 +0000 (16:21 +0800)]
Merge branch 'bugfix/fix_qio_mode' into 'master'
bootloader(flash): fix flash QIO mode configuration error.
See merge request idf/esp-idf!2403
Jiang Jiang Jian [Thu, 17 May 2018 03:13:13 +0000 (11:13 +0800)]
Merge branch 'bugfix/btdm_change_scan_mode_after_conn_or_disconn' into 'master'
component/bt: Change scan mode after connected or disconnected
See merge request idf/esp-idf!2402
Zhang Zhao Xiang [Wed, 11 Apr 2018 11:37:31 +0000 (19:37 +0800)]
fix i2s mix result and error code
Angus Gratton [Thu, 17 May 2018 02:14:26 +0000 (10:14 +0800)]
freertos: Bump default idle task stack size to 1536 bytes
In situations where idle task runs a lot of idle hooks or cleanup code
(due to pthread local storage, etc) it can use more than 1KB of stack.
(I think the trigger is if a context switch happens at the right point
in the TLS cleanup).
Also removes an sdkconfig.default which accidentally set all config items,
including this stack size.
Wangjialin [Tue, 15 May 2018 09:14:52 +0000 (17:14 +0800)]
bootloader(flash): fix flash QIO mode configuration error.
reported from github: https://github.com/espressif/esp-idf/issues/1944
1. Add SPI register setup in execute_flash_command.
2. Save and recover the SPI ctrl register in execute_flash_command.
Angus Gratton [Wed, 16 May 2018 11:53:40 +0000 (19:53 +0800)]
Merge branch 'bugfix/docs_small_updates' into 'master'
Bugfix/docs small updates
See merge request idf/esp-idf!2392
Angus Gratton [Wed, 16 May 2018 11:52:45 +0000 (19:52 +0800)]
Merge branch 'bugfix/mbedtls_submodule' into 'master'
mbedtls: Add submodule check at build time
See merge request idf/esp-idf!2395
Angus Gratton [Wed, 16 May 2018 11:52:26 +0000 (19:52 +0800)]
Merge branch 'feature/ledc_add_api_set_hpoint_val' into 'master'
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
See merge request idf/esp-idf!2233
Angus Gratton [Wed, 16 May 2018 11:46:55 +0000 (19:46 +0800)]
Merge branch 'feature/btdm_modify_bt_gap_structure' into 'master'
component/bt: modify BT GAP structure
See merge request idf/esp-idf!2364
baohongde [Wed, 16 May 2018 10:58:13 +0000 (18:58 +0800)]
component/bt: modify BT GAP structure
1. Separate the upward and the downward
2. Cancel use of msg.aid when call btc_transfer_context
XiaXiaotian [Wed, 16 May 2018 10:50:28 +0000 (18:50 +0800)]
Fix a few WiFi bugs
1. remove rc when ap not found
closes issue: https://github.com/espressif/esp-idf/issues/1797
2. allocate mimo packet to internal memory
3. use FRC2 timer instead of WDEV_NOW() for modem sleep to calculate
TBTT time.
It fixes the bug that TBTT will be incorrect if beacon is lost.
baohongde [Tue, 15 May 2018 08:35:48 +0000 (16:35 +0800)]
component/bt: Change scan mode after connected or disconnected
Jiang Jiang Jian [Wed, 16 May 2018 10:18:58 +0000 (18:18 +0800)]
Merge branch 'bugfix/fix_interrupt_list_insert_issue' into 'master'
esp32: fix interrupt list insert issue
See merge request idf/esp-idf!2391
Jiang Jiang Jian [Wed, 16 May 2018 09:40:18 +0000 (17:40 +0800)]
Merge branch 'bugfix/touch_change_default_enable_value' into 'master'
bugfix(touch): change the default value for sar_touch_enable register.
See merge request idf/esp-idf!1870
Jiang Jiang Jian [Wed, 16 May 2018 09:39:04 +0000 (17:39 +0800)]
Merge branch 'bugfix/rmt_tx_cmd' into 'master'
example(rmt): tx cmd without negative coding
See merge request idf/esp-idf!1884
Chen Wu [Mon, 12 Mar 2018 07:16:17 +0000 (15:16 +0800)]
bugfix(ota): update ota to download valid bin file
Jiang Jiang Jian [Wed, 16 May 2018 08:04:34 +0000 (16:04 +0800)]
Merge branch 'bugfix/improve_bt_debug' into 'master'
components/bt: Improve the Bluetooth debug messaging scheme
See merge request idf/esp-idf!2303
Jiang Jiang Jian [Wed, 16 May 2018 06:55:00 +0000 (14:55 +0800)]
Merge branch 'feature/tw16750_full_support_esp_wifi_80211_tx' into 'master'
esp32/docs: fully support esp_wifi_80211_tx
See merge request idf/esp-idf!2007
Liu Zhi Fu [Mon, 26 Feb 2018 05:29:52 +0000 (13:29 +0800)]
esp32/docs: fully support esp_wifi_80211_tx
Closes https://github.com/espressif/esp-idf/issues/1256
Closes https://github.com/espressif/esp-idf/issues/1332
krzychb [Fri, 11 May 2018 18:08:55 +0000 (20:08 +0200)]
Fixed git command
Wenderson Oliveira [Thu, 10 May 2018 22:49:17 +0000 (19:49 -0300)]
Fix git command. Merges https://github.com/espressif/esp-idf/pull/1943
Angus Gratton [Tue, 15 May 2018 10:44:46 +0000 (18:44 +0800)]
Merge branch 'bugfix/rtc_xtal_tests' into 'master'
ci: Only run XTAL unit tests assuming board has an XTAL
See merge request idf/esp-idf!2401
Angus Gratton [Tue, 15 May 2018 10:02:28 +0000 (18:02 +0800)]
nvs README: Remove section about encryption capability
Angus Gratton [Tue, 15 May 2018 06:37:04 +0000 (14:37 +0800)]
ci: Only run XTAL unit tests assuming board has an XTAL, run less repeats
Angus Gratton [Tue, 15 May 2018 07:32:28 +0000 (15:32 +0800)]
Merge branch 'feature/dport_access' into 'master'
soc: Dport access with pre-read register APB
See merge request idf/esp-idf!2257
He Yin Ling [Tue, 15 May 2018 06:58:08 +0000 (14:58 +0800)]
Merge branch 'test/add_iperf_example_test' into 'master'
test: add iperf example test
See merge request idf/esp-idf!1753
Angus Gratton [Tue, 15 May 2018 06:33:51 +0000 (14:33 +0800)]
Merge branch 'feature/vfs_access' into 'master'
Implement VFS support for access()
See merge request idf/esp-idf!2378
Angus Gratton [Tue, 15 May 2018 06:19:20 +0000 (14:19 +0800)]
Merge branch 'bugfix/spi_native_pins' into 'master'
fix several spi issues about pin configurations
See merge request idf/esp-idf!2309
He Yin Ling [Mon, 8 Jan 2018 12:33:09 +0000 (20:33 +0800)]
example test: integrate wifi throughput test to CI
He Yin Ling [Sun, 7 Jan 2018 12:28:09 +0000 (20:28 +0800)]
example test: add test case for iperf example
Angus Gratton [Tue, 15 May 2018 04:57:22 +0000 (12:57 +0800)]
Merge branch 'bugfix/select_rtc_slow_clk' into 'master'
esp32/clk: Fix starting rtc oscillator if it bad
See merge request idf/esp-idf!2215
Konstantin Kondrashov [Fri, 30 Mar 2018 12:14:29 +0000 (17:14 +0500)]
esp32/clk:Fix starting rtc oscillator if it is bad
If the RTC crystal is bad or has no matched capacitance, then you do not need to start such the crystal. It is necessary to determine this case, output an error (about impossibility to start from the oscillator) and start from the internal RC of the chain.
Reduced the default value of the number of bootstrap cycles. Because we can oscillating the oscillator which then stops. (in Kconfig). Changed from 100 to 5.
The number of calibration cycles has been increased. It is the main criterion for estimating the launch of an oscillator. A large increase leads to an increase in the load time, as well as the stability of recognition of this case. (in Kconfig).
Changed from 1024 to 3000.
He Yin Ling [Thu, 11 Jan 2018 06:18:29 +0000 (14:18 +0800)]
iperf example: add scan command to get AP rssi
He Yin Ling [Fri, 9 Mar 2018 09:42:08 +0000 (17:42 +0800)]
iperf example: add cmd to trace max heap usage
He Yin Ling [Tue, 16 Jan 2018 14:16:03 +0000 (22:16 +0800)]
tiny-test-fw: fix misc bugs:
1. configs are not functional
* decorator will be executed when search case, need to set default config before search case.
2. fix DUT encode/decode errors
* python3 serial don't support write string/unicode, need to convert to bytes first.
* python2 string could failed to encode/decode non-acsii chars
3. fix bug that log folder not created
4. fix bug that test suite name is not correctly passed:
* the keyward arg should be `test_suite_name` not `test_name`
5. fix bug that test stopped on failed case
6. fix DUT `read` don't return all data cache
* `_DataCache.get_data` should first copy all data from queue to data cache and then return to user.
7. fix bug that `expect_all` failed even all expected item passed
8. optimize error info for expect
* print pattern for regular expression when match failed
9. fix bug that set default config doesn't work
He Yin Ling [Thu, 11 Jan 2018 09:49:27 +0000 (17:49 +0800)]
tiny-test-fw: add utilities:
1. Attenuator: control programmable attenuator
2. PowerControl: control APC PDU to power on/off devices
3. LineChart: use matplotlib to draw line chart
He Yin Ling [Sun, 7 Jan 2018 12:24:38 +0000 (20:24 +0800)]
tiny-test-fw: implement `env.get_pc_nic_info`:
this method is used to get mac/ipv4/ipv6 address for one NIC
Angus Gratton [Tue, 15 May 2018 03:13:20 +0000 (11:13 +0800)]
Merge branch 'doc/update_licenses' into 'master'
docs: update list of third-party libraries, copyrights, and licenses
See merge request idf/esp-idf!2381
Angus Gratton [Tue, 15 May 2018 02:32:21 +0000 (10:32 +0800)]
Merge branch 'bugfix/sdspi_delayed_write_response' into 'master'
sdspi: handle delayed response to data write command
See merge request idf/esp-idf!2290
Jiang Jiang Jian [Tue, 15 May 2018 02:04:33 +0000 (10:04 +0800)]
Merge branch 'bugfix/rmt_tx_stop_bug' into 'master'
driver(rmt): RMT tx stop workaround
See merge request idf/esp-idf!1915
Ivan Grokhotkov [Thu, 10 May 2018 10:19:30 +0000 (18:19 +0800)]
docs: update list of third-party libraries, copyrights, and licenses
Jiang Jiang Jian [Tue, 15 May 2018 01:59:21 +0000 (09:59 +0800)]
Merge branch 'feature/adjust_log_level_about_uart' into 'master'
feat: Adjust log level about UART
See merge request idf/esp-idf!2047
Jiang Jiang Jian [Tue, 15 May 2018 01:57:13 +0000 (09:57 +0800)]
Merge branch 'feature/docs_translate_home_page' into 'master'
Update index.rst. Merges https://github.com/espressif/esp-idf/pull/1747
See merge request idf/esp-idf!2368
Jiang Jiang Jian [Tue, 15 May 2018 01:49:56 +0000 (09:49 +0800)]
Merge branch 'bugfix/rename_clk_rst_bits_for_spi' into 'master'
rename clock enable and reset bits for SPI modules
See merge request idf/esp-idf!2293
krzychb [Wed, 9 May 2018 05:45:54 +0000 (07:45 +0200)]
Corrected link rendering and additional translations
Jiang Jiang Jian [Mon, 14 May 2018 13:20:44 +0000 (21:20 +0800)]
Merge branch 'bugfix/btdm_fix_crash_without_smp_when_deinit_bluedroid' into 'master'
Component/bt: fix crash without SMP when deinit bluedroid
See merge request idf/esp-idf!2375
Konstantin Kondrashov [Thu, 22 Mar 2018 12:39:59 +0000 (17:39 +0500)]
soc: Change DPORT access
When two CPUs read the area of the DPORT and the area of the APB, the result is corrupted for the CPU that read the APB area.
And another CPU has valid data.
The method of eliminating this error.
Before reading the registers of the DPORT, make a preliminary reading of the APB register.
In this case, the joint access of the two CPUs to the registers of the APB and the DPORT is successful.
Hrishikesh Dhayagude [Wed, 25 Apr 2018 02:11:06 +0000 (07:41 +0530)]
components/bt: Improve the Bluetooth debug messaging scheme
As of now, when Bluetooth debugs are enabled, all the messages are
mapped to BT_PRINTF which is mapped to ESP_LOGE. Hence, make monitor
shows all logs in red color which might lead to missing the actual
errors
This patch maps the Bluetooth messages to appropriate ESP_LOG* messages
and improves readability.
Also, make the BT trace level be configurable in menuconfig, so that
each layer of bt trace can be enabled/disabled.
Finally, add debug log control for BTC, OSI, BLUFI and clear up
Bluetooth debug logs.
So, with this the method of enabling Bluetooth logs is as follows:
1. make menuconfig -> Component config -> Bluetooth -> Bluedroid Enable
-> BT DEBUG LOG LEVEL -> set trace level for every layer of BT
Signed-off-by: Hrishikesh Dhayagude <hrishi@espressif.com>
Jiang Jiang Jian [Mon, 14 May 2018 12:42:15 +0000 (20:42 +0800)]
Merge branch 'feature/wifi_add_sniffer_ctrl_pkt' into 'master'
add sniffer control packet support
See merge request idf/esp-idf!1904
Jiang Jiang Jian [Mon, 14 May 2018 12:19:29 +0000 (20:19 +0800)]
Merge branch 'bugfix/btdm_reconnect_con_params_update_reject_in_smp' into 'master'
Component/bt: update con params is rejected in smp when reconnection
See merge request idf/esp-idf!2318
chenjianqiang [Mon, 14 May 2018 11:47:16 +0000 (19:47 +0800)]
revise the explain of a parameter(brk_len) in uart driver file
kooho [Sat, 24 Feb 2018 08:36:21 +0000 (16:36 +0800)]
driver(rmt):Fix rmt_tx_stop bug.
Angus Gratton [Mon, 14 May 2018 10:36:35 +0000 (18:36 +0800)]
Merge branch 'bugfix/logging_docs_cleanup' into 'master'
log: clean up docs, clarify esp_log_level_set usage
See merge request idf/esp-idf!2080
Roland Dobai [Mon, 14 May 2018 09:54:27 +0000 (11:54 +0200)]
Fix compilation errors when -O3 is used
Closes https://github.com/espressif/esp-idf/issues/718
jack [Tue, 24 Apr 2018 08:38:46 +0000 (16:38 +0800)]
rename clock enable and reset bits for SPI modules
1.The names of clock enable and reset bits do not match with TRM, just rename them.
Angus Gratton [Mon, 14 May 2018 08:07:27 +0000 (16:07 +0800)]
Fix "undefined variable which git" warning when submodules not initialized
Angus Gratton [Mon, 14 May 2018 08:07:18 +0000 (16:07 +0800)]
mbedtls: Add mbedtls submodule check to build system
Jiang Jiang Jian [Mon, 14 May 2018 07:25:45 +0000 (15:25 +0800)]
Merge branch 'bugfix/bluedroid_const_char' into 'master'
Bluedroid: remove warnings about discarding "const" for "const char*"
See merge request idf/esp-idf!2387
Roland Dobai [Fri, 4 May 2018 09:44:38 +0000 (11:44 +0200)]
Implement VFS support for access()
Closes https://github.com/espressif/esp-idf/issues/1085
XiaXiaotian [Mon, 5 Feb 2018 03:52:56 +0000 (11:52 +0800)]
add sniffer control packet support
Liu Zhi Fu [Sun, 13 May 2018 03:46:09 +0000 (11:46 +0800)]
esp32: fix interrupt list insert issue
If the allocated interrupt list is not empty and the new item will be inserted
as the header of the list, insert_vector_desc() causes crash because pre is
null. This commit fix this issue.
He Yin Ling [Mon, 14 May 2018 06:06:05 +0000 (14:06 +0800)]
Merge branch 'test/add_unit_test_jobs' into 'master'
ci: increase number of unit test jobs, temporarily disable light sleep test for short durations
See merge request idf/esp-idf!2386
kooho [Thu, 12 Apr 2018 07:38:39 +0000 (15:38 +0800)]
driver(ledc): fix duty and fade issues and add thread-safe version APIs.
1. Fix the duty fade check issue reported from https://github.com/espressif/esp-idf/issues/1914
2. Fix the duty overflow issue when duty_scale is set to 1.
3. Fix the duty fade error when a fade operation is under way. We must configure a new duty setting after the previous fade operation has finished due to hardware limit.
4. Add thread-safe version APIs to set duty and fade.
5. Correct the duty range in driver.
Angus Gratton [Mon, 14 May 2018 01:16:02 +0000 (09:16 +0800)]
Merge branch 'bugfix/ledc_error' into 'master'
ledc driver: Clarify logging of function argument errors
See merge request idf/esp-idf!2380
Angus Gratton [Mon, 14 May 2018 01:15:44 +0000 (09:15 +0800)]
Merge branch 'feature/mbedtls_2_9_0' into 'master'
Re-add mbedTLS as a submodule, update to 2.9.0
See merge request idf/esp-idf!2367
Angus Gratton [Fri, 11 May 2018 10:54:40 +0000 (18:54 +0800)]
Merge branch 'bugfix/add_comments_for_adc' into 'master'
driver(adc): Add descriptions that starting ADC can trigger interrupt of GPIO36…
See merge request idf/esp-idf!1910
Ivan Grokhotkov [Fri, 11 May 2018 10:14:13 +0000 (18:14 +0800)]
esp32/test: temporarily disable test for light sleep duration
Until the issue in CI is debugged
Angus Gratton [Fri, 11 May 2018 10:12:47 +0000 (18:12 +0800)]
Merge branch 'bugfix/vfs_append' into 'master'
VFS: use O_APPEND flag of open() correctly
See merge request idf/esp-idf!2382
Roland Dobai [Fri, 11 May 2018 09:08:58 +0000 (11:08 +0200)]
Bluedroid: remove warnings about discarding "const" for "const char*"
kooho [Mon, 5 Feb 2018 13:51:32 +0000 (21:51 +0800)]
driver(adc): add descriptions for the issue that starting ADC can trigger interrupt of GPIO36 and GPIO39.
Ivan Grokhotkov [Fri, 11 May 2018 08:42:52 +0000 (16:42 +0800)]
ci: increase number of unit test jobs